Tag Archives: lab

Product Liability in the Cannabis Industry: Insights From 2022 & Looking Forward

By Andrew Solow, David Kerschner, Alessandra Lopez
No Comments

In 2022, product liability lawsuits in the cannabis/cannabidiol (CBD) industry continued to focus on levels of THC and the psychoactive ingredient in cannabis, while federal agencies continued issuing warning letters for CBD products (including CBD-infused food and dietary supplements) that made misleading medical claims. Against this backdrop of ongoing litigation and regulatory enforcement, 2022 showed that at the Federal level, there is more recognition that marijuana is becoming increasingly normalized. For example, President Biden pardoned federal offenses of simple marijuana possession and requested a reassessment of marijuana’s classification as a Schedule I drug under federal law. Additionally, Congress passed its first standalone piece of cannabis reform with the Medical Marijuana and Cannabidiol Research Expansion Act (MMCREA) which, among other things, will ease restrictions on cannabis research and allow for more clinical trials. And even though the Food and Drug Administration (FDA) declined to act on CBD products, the agency announced that it will work with Congress to create a new regulatory framework for CBD products (2023 FDA Announcement).

These events of the past year provide a glimpse into what the future may hold for cannabis and CBD companies when it comes to product liability risks. This article looks at the types of product liability actions that the cannabis and CBD industry faced in 2022 and may encounter in the future, and provides some basic guidance on how to best mitigate, and if necessary, defend these potentially costly litigations.

Focus on Cannabis and CBD Risks

FDAlogoA central part of any product liability lawsuit—regardless of whether brought under a design defect and/or adequate warning theory—is that a product caused or was a substantial contributing factor to a Plaintiff’s injury or illness. Thus, any potential safety concerns over cannabis/CBD could end up as the subject of litigation in the future. In the 2023 FDA Announcement, the FDA recognized that “the use of CBD raises various safety concerns, especially with long-term use,” including potential harm to the liver and negative interactions with certain medications. The agency also noted that questions still exist on how much CBD can be consumed, and for how long, before causing harm. Furthermore, on December 2, 2022, President Biden signed the MMCREA into law, which is intended to advance research on the potential risks and medical benefits of cannabis and cannabis products.1 This additional funding will not only help researchers learn more about possible safety risks that may lead to future product liability claims, but will also allow for better exploration of the benefits of these products to possibly expand product indications and help reach new customers.

Given the FDA’s statements and the increased funding for new research, CBD and cannabis companies should ensure that they are properly monitoring both regulatory communications and new research regarding risks that may be associated with their products. As new information is released, companies should evaluate how their product labels and marketing messages should be altered. Announcements like this one by the FDA can be seen as providing industry participants with knowledge about certain risks, and how companies react could be analyzed, post hoc, in any litigation down the road.

2022 Product Liability Actions  

Over the last year, misbranding/mislabeling issues presented some of the most prevalent litigation risks for industry participants.

An example of a warning letter the FDA sent to a CBD products company making health claims

For example, at the Federal level in 2022, the FDA issued thirty-three warning letters to CBD companies, a nearly 400% increase from 2021. These letters generally focused on CBD products that made medical claims. Some of these warning letters addressed misbranding, where the product labels provided inadequate directions for consumer use. In one letter, the FDA noted that because the CBD products were “offered for conditions that are not amendable to self-diagnosis and treatment by individuals who are not medical practitioners,” ranging from cancer to diabetes, labeling compliance was only possible if the product was an FDA-approved prescription drug with FDA-approved labeling. Other companies received warning letters in March of 2022 for making misleading representations that their CBD products were safe and/or effective to prevent or treat COVID-19. Many of these representations were made via companies’ websites and social media platforms. The warning letters—often triggers for product liability actions, as well as consumer protection/fraud actions—serve as a reminder that companies cannot make medical claims on non-FDA approved drug products and must otherwise present accurate information to consumers not only on product packaging, but any form of marketing or advertising, including company websites and social media platforms.

Turning to state-level regulatory actions, Oregon’s Liquor and Cannabis Commission fined a cannabis company $130,000 and suspended the company’s license for 23 days over an alleged label mix-up between its CBD and THC products. According to the state’s investigative report, a company employee allegedly confused two product buckets with similar identification numbers, one that contained THC and the other CBD, and accidentally switched the labels of the two products. In addition to the fine and license-suspension, the state agency also issued a mandatory recall on the CBD drops based on the alleged undisclosed levels of THC.

This same incident also spurred a string of civil lawsuits, resulting in several settlements by the company in 2022.2 Numerous customers reported experiencing “paranoia,” “mind fog,” and feeling “extremely high,” with at least five people going to the emergency room with serious health issues due to use of the CBD drops. One lawsuit, which was publicly settled for $50,000 in January of 2022, alleged that the company failed to warn the plaintiff that the CBD drops contained THC or that the product may have been contaminated with foreign substances like THC, and that the company failed to exercise quality control standards that would have detected the THC.3 Nine other lawsuits made similar failure to warn allegations based on the same batch of CBD drops and were settled by January of 2022, although those settlements were not disclosed.4 In October of 2022, the company agreed to pay a settlement of $100,000 in a class action suit, which alleged that the company failed to disclose that the CBD product contained substantial amounts of THC.5 The class action focused on unlawful trade practices claims, including that the company falsely represented that the product had the characteristics, uses, and benefits of a CBD product that did not contain THC.6 Also in October 2022, the company settled a wrongful death lawsuit—alleging that the company failed to warn the plaintiff that the drops contained THC and had negligent quality control standards—stemming from the same CBD drops,7 where the plaintiff suffered stroke-like-symptoms, allegedly due to the tainted CBD product, and ultimately died.8

Other recent lawsuits have also focused on mislabeled cannabis products, alleging that companies failed to inform customers that products contained THC. For example, in Kentucky, a man who drove into a bus after using a CBD vape sued both the CBD manufacturer and retailer on December 14, 2022, claiming that he was not warned that the vape contained a substance that would make him intoxicated.9 According to the complaint, the store employees told the man that the vape was “all natural” but made no mention that the product contained THC.10 The man alleged that the vape actually contained Delta-8 THC and brought negligence, failure to warn, and state consumer protection law claims.11

As noted above, in addition to traditional product liability actions, companies are likely to face increased consumer fraud and false advertising actions in the absence of personal injuries. Two class actions brought in December of 2020 against a hemp tea maker alleged that the company’s website and the product’s packaging fraudulently stated that a tea contained zero THC.12 Plaintiffs claimed that they tested positive for THC after drinking the tea and that product testing similarly revealed that the tea contained some THC.13

Potency inflation marketing communications from a laboratory

Last year also saw a rise in cases focused on potency inflation, alleging that cannabis companies knowingly overstated the amount of THC in their products to charge higher prices.14 Again, while these actions focused on consumer fraud allegations rather than product liability claims, these cases underscore the importance of accurate labeling. Due to potency inflation concerns, states have started investigating licensed cannabis testing labs within their respective jurisdictions, resulting in product recalls and fines. Some states have also updated their regulations, requiring cannabis companies to test their products through two separate labs.

Finally, contamination and the existence of impurities and other byproducts has been a recent focus of several product liability lawsuits across the life sciences space, and this trend is something that cannabis and CBD companies should be aware of and take steps to mitigate.

For example, a Canadian cannabis producer reached a $2.31 million settlement over a class action brought in March of 2017 regarding pesticide-contaminated medical marijuana. The marijuana was recalled due to the presence of myclobutanil and bifenazate pesticides, neither of which were authorized for use on cannabis plants in Canada. The lead plaintiff experienced nausea and vomiting, allegedly from consuming the medical cannabis, and brought numerous claims on behalf of the class, including negligent design, development, testing, manufacturing, distribution, marketing, and sales.15 In the United States, California’s Department of Cannabis Control issued a mandatory recall on January 26, 2022 for a batch of cannabis flower that was contaminated with mold. On March 25, 2022, the New Mexico Cannabis Control Division recalled cannabis products sold by a local medical cannabis company because the product contained impermissibly high levels of mold. New Mexico’s Cannabis Control Division also required the company to immediately cease and desist operations at its production and manufacturing site.

A Look at the Future and What Companies Can do to Mitigate Product Liability Risks  

The FDA’s 2023 announcement means that the industry will have to wait for Congressional action for the development of a regulatory scheme that can help standardize requirements and provide industry players additional defenses when facing product liability actions. Many of the proposed risk management tools in the FDA Announcement could help companies mitigate future litigation risks if implemented. These risk management tools may include “clear labels, prevention of contaminants, CBD content limits, and measures, such as minimum purchase age, to mitigate the risk of ingestion by children.” Although the FDA has had regulatory oversight over CBD and other hemp-derived products for nearly four years, the agency has not developed a regulatory framework for these products aside from issuing warning letters, leaving manufacturers and distributors without much guidance. The FDA has also left the states to fill the void, resulting in a patchwork of differing—and sometimes conflicting—state laws. Additional guidance and regulation on labeling at the federal level for cannabis and cannabis-derived products will make compliance a more straightforward proposition and may provide avenues for industry participants to explore preemption defenses in the face of future mislabeling claims.

Just some of the many CBD products on the market today

In addition to following the changing regulatory landscape and understanding how regulatory changes can impact litigation defenses, cannabis and CBD companies can continue to take various steps to help mitigate future litigation risks.

Quality Control: Adequate testing procedures and effective quality control procedures can help avoid contamination issues and situations where products are mixed up during the manufacturing process. For example, the company whose license was suspended in Oregon due to the alleged mix up between CBD and THC subsequently implemented new ingredient tracking protocols, adopted a policy to retain samples from each batch of product, and now sends additional samples to an independent lab to ensure product compliance before anything is sold.

Proper documentation of testing and quality control procedures, as well as maintaining records of compliance checks, can also help companies put together a defense to state regulatory actions or lawsuits relating to contamination or manufacturing defects. Indeed, in February of 2022, an Arizona marijuana testing lab was fined $500,000 for various incomplete records and documentation as well as improperly calibrated machines for contamination testing, with an inspector also noting that one of the employees was trained to use a technique that produced inflated potency results.

Ongoing Safety & Regulatory Review: Keeping up to date with regulations and science will play a key role in making sure labels are accurate and defendable. Working directly with regulators and seeking guidance from regulators on labeling can help potential defendants present a clear and compelling labeling defense. Moreover, the 2023 FDA Announcement made clear that the agency will not pursue rulemaking on CBD’s potential use in foods and dietary substances. Thus, industry players should monitor agency announcements and engage with the FDA’s Cannabis Product Committee (CPC) and Congress to better understand the potential structure of this new regulatory pathway.

Stay on Top of the Science: A boost in cannabis research is on the horizon, as the Medical Marijuana and Cannabidiol Research Expansion Act (MMCREA) will advance research on the potential risks and benefits of cannabis products and promote the development of FDA-approved drugs derived from marijuana and CBD. On the litigation front, causation is an essential element in most causes of action, and plaintiffs will have to prove that the cannabis caused their injury. Thus, industry players should be aware of the current science, including potential side effects.

Litigation Monitoring: Finally, companies will also be well served by following court decisions involving CBD and cannabis products. For example, courts in 2022 were split over the legality of Delta-8 THC, a substance typically manufactured from hemp-derived CBD. The Ninth Circuit held in AK Futures v. Boyd Street Distro that Delta-8 THC found in e-cigarettes and vape products is legal under the 2018 Farm Act, at least in the intellectual property context.16 But in Kansas, a federal judge ruled that the 2018 Farm Act does not make selling hemp-derived products such as Delta-8 THC legal.17 In Texas, litigation initiated in 2021 is ongoing over the legality of Delta-8 THC.18 There, a hemp company sued the Texas Department of State Health Services for its classification of Delta-8 THC as a Schedule I drug, making the sale of this substance a felony offense. A temporary injunction was granted on November 8, 2021—temporarily lifting the ban on sales of Delta-8 THC products—but the plaintiff’s request for a permanent injunction remains pending.19 As these lawsuits show, the legality of different products may vary by jurisdiction, whether by regulation or a judicial decision.


References

  1. Medical Marijuana and Cannabidiol Research Expansion Act, Pub. L. 117–215, 136 Stat. 2257 (2022).
  2. Agbonkhese v. Curaleaf Inc., No. 3:21-cv-01675, (D. Or. Jan. 5, 2022).
  3. Agbonkhese v. Curaleaf Inc., No. 3:21-cv-01675, ECF 1, 6 (D. Or.).
  4. See Crawforth v. Curaleaf, Inc., No. 3:21-cv-1432 (D. Or. Sept. 29, 2021); Lopez v. Curaleaf, Inc., No. 3:21-cv-1465 (D. Or. Oct. 6, 2021);
  5. Williamson v. Curaleaf, Inc., No. 3:22-cv-782, ECF 1, 8 (D. Or.).
  6. Williamson v. Curaleaf, Inc., No. 3:22-cv-782 (D. Or. May 30, 2022).
  7. Estate of Earl Jacobe v. Curaleaf, Inc., No. 3:22-cv-00001, 19 (D. Or. Oct. 18, 2022).
  8. Estate of Earl Jacobe v. Curaleaf, Inc., No. 3:22-cv-00001 1 (D. Or. Jan. 1, 2022).
  9. Howard v. GCHNC3 LLC et al., No. 5:22-cv-00326 (E.D. Ky. Dec. 14, 2022).
  10. Complaint at ¶ 11, Howard v. GCHNC3 LLC et al., No. 5:22-cv-00326 (E.D. Ky. Dec. 14, 2022).
  11. Complaint at ¶¶ 15-33, Howard v. GCHNC3 LLC et al., No. 5:22-cv-00326 (E.D. Ky. Dec. 14, 2022).
  12. Williams v. Total Life Changes, LLC, No. 0:20-cv-02463 (D. Minn. Dec. 3, 2020); Santiago v. Total Life Changes LLC, No. 2:20-cv-18581 (D.N.J. Dec. 9, 2020).
  13. Complaint at ¶¶ 54-59, Williams v. Total Life Changes, LLC, No. 0:20-cv-02463 (D. Minn. Dec. 3, 2020); Complaint at ¶¶ 21-25, Santiago v. Total Life Changes LLC, No. 2:20-cv-18581 (D.N.J. Dec. 9, 2020).
  14. See Centeno v. Dreamfields Brands Inc., No. 22STCV33980 (Cal. Superior Ct. L.A. Cnty. Oct. 20, 2022); Shanti Gallard v. Ironworks Collective Inc., No. 22STCV38021 (Cal. Superior Ct. L.A. Cnty. Dec. 6, 2022).
  15. Downton v. Organigram Holdings Inc., Hfx No. 460984 (Sup. Ct. Nova Scotia Mar. 3, 2017).
  16. AK Futures LLC v. Boyd St. Distro, LLC, 35 F.4th 682 (9th Cir. 2022).
  17. Dines v. Kelly, No. 2:22-cv-02248, 2022 WL 16762903 (D. Kan. Nov. 8, 2022).
  18. Hometown Hero v. Tex. Dep’t of State Health Services, No. D-1-GN-21-006174 (Travis Cnty., Tex. Oct. 20, 2021).
  19. Hometown Hero v. Tex. Dep’t of State Health Services, No. D-1-GN-21-006174 (Travis Cnty., Tex. Nov. 8, 2021).

2023 Cannabis Labs Virtual Conference: February Program

By Cannabis Industry Journal Staff
No Comments

2023 Cannabis Labs Virtual Conference: February Program

Click here to watch the recording

Agenda

When & Why You Should use Molecular-Based vs. Cultural-Based ID Methods

  • Josh Smith, MS, President & CSO, Telic Labs; Acting Lab Director, ABKO Labs

When it comes to microbial diagnostics, there are many different methods to choose from. How do you know which ones to choose for each application? If you know how and why the different methods do what do it makes it much easier to look for and identify your target microbe of interest. Additionally learn why not all methods are created equal, and not all methods can be used for every test or target.

Hop Latent Viroid – The Pandemic of the Grow Room: Fact, Fiction & Management

  • Dr. Tassa Saldi, Chief Science Officer, TUMI Genomics

In this talk Dr. Saldi will provide a laymen overview of viroid biology including how viroids differ from more familiar pathogens such as viruses, bacteria and fungus. Dr. Saldi will discuss the various HLVd testing options and what a cultivator should look for when choosing a testing lab. Finally, recommendations regarding sample collection, ideal HLVd testing schedules and how to mitigate losses from HLVd when it is found in a facility will be reviewed.

Cannabis Laboratory Accreditation – Challenges & Solutions

  • Christopher Fox-Strauss, Accreditation Manager, ANAB

Most cannabis laboratories are familiar with accreditation as required by state regulations, but many labs still have questions about how to conform to the requirements. During this session we will focus on some of the recurring challenges and questions we are seeing in ISO 17025-accredited cannabis laboratories. We will also highlight some supplemental resources and programs to elevate laboratory performance and compliance.

Click here to watch the recording

Cannabis Quality Conference Dates, Location Announced

By Cannabis Industry Journal Staff
No Comments

Innovative Publishing Company, Inc., the publisher of Cannabis Industry Journal has announced the return of the Cannabis Quality Conference (CQC), taking place October 16-18, 2023 at the Hilton in Parsippany, New Jersey. Presented by Cannabis Industry Journal, the CQC is a business-to-business conference and expo where cannabis industry leaders and stakeholders meet to build the future of the cannabis marketplace.

“New Jersey and the surrounding cannabis markets welcomed the CQC with open arms in 2022 and we’re excited to come back to North Jersey and expand on what we have built,” says Aaron Biros, editor of Cannabis Industry Journal and director of the Cannabis Quality Conference. “In addition to the sessions on cannabis quality, lab testing and infused products manufacturing, we will host sessions on the quality of business, strategic operational considerations and more.” The CQC is seeking abstracts for presentations and posters to be considered for the event. Click here to see the call for abstracts.

In addition to the two full days of cannabis education and programming, pre-conference workshops designed to address safety and compliance in cannabis edibles will take place on October 16. Also new to this year’s event is a strategic co-location with the Food Safety Consortium (FSC) running at the same time and in the same space as the CQC, allowing for food safety and cannabis professionals to meet and share best practices.

“We are bringing two great conferences together under one roof,” says Rick Biros, president of Innovative Publishing and director of the Food Safety Consortium. “The Food Safety Consortium will continue its strategic meeting of the minds format, but we are complementing that with the practical, boots-on-the-ground Food Safety Hazards track. Co-location with the CQC allows attendees to take advantage of additional education on product testing and quality assurance in the burgeoning cannabis market, as well as preconference workshops delving into infused product safety and compliance that will appeal to both food safety and cannabis professionals.”

Click here to stay up to date on lodging, early bird pricing, keynote announcements and more. All of these events will take place October 16-18, 2023 at the Hilton in Parsippany, New Jersey. For sponsorship and exhibit inquiries, contact RJ Palermo, Director of Sales, and Chelsea Patterson, Account Executive. Stay tuned for more information and when registration opens.

About Cannabis Industry Journal 

Cannabis Industry Journal is a digital media community for cannabis industry professionals. We inform, educate and connect cannabis growers, extractors, processors, infused products manufacturers, dispensaries, laboratories, suppliers, vendors and regulators with original, in-depth features and reports, curated industry news and user-contributed content, and live and virtual events that offer knowledge, perspectives, strategies and resources to facilitate an informed, legalized and safe cannabis marketplace.

About the Cannabis Quality Conference

The Cannabis Quality Conference is an educational and networking event for the cannabis industry that has cannabis safety, quality and regulatory compliance as the foundation of the educational content of the program. With a unique focus on science, technology, safety and compliance, the “CQC” enables attendees to engage in conversations that are critical for advancing careers and organizations alike. Delegates visit with exhibitors to learn about cutting-edge solutions, explore three high-level educational tracks for learning valuable industry trends, and network with industry executives to find solutions to improve quality, efficiency and cost effectiveness in the evolving cannabis industry.

ASTM Develops Two New Cannabis Standards

By Cannabis Industry Journal Staff
No Comments

According to a press release emailed this week, ASTM International’s subcommittee focused on cannabis, D37, is in the midst of developing two new standards surrounding cannabis safety and education.

One standard, WK84667, is designed to “help document engineering controls for air filtration and person protective equipment (PPE) in cannabis processing facilities,” says ASTM member Trevor Morones. The premise of this standard appears to be employee safety; with proper, standardized air filtration and PPE, the standard will help companies keep their workers safe and prevent inhalation of potentially harmful particles, like cannabis dust, stalk fiber, florescence and crystalized dust. “We are working to develop a robust community of cannabis professionals who can share their experiences in workplace and personnel safety,” says Morones.

The other proposed standard, WK84589, seeks to develop a uniform metric for “determining the intoxication level of a cannabinoid.” Initially focusing on delta9-THC, the standard will help raise awareness and promote public health and safety by informing consumers how intoxicating a cannabis product is for the average adult.

ASTM Pamela Epstein says this standard will hopefully develop a form of measurement akin to ABV in alcoholic drinks, allowing consumers to see how potent a certain cannabis product is. “Beyond providing consumers with a complete assessment of a product’s total intoxicating/impairing effects, the proposed standard may provide regulators with a methodology to meaningfully account for public health and safety,” says Epstein. “The specification can unify consumer awareness and can be used across all product types and jurisdictions.”

The ASTM D37 committee is working on a number of other standards related to these and they invite anyone interested to share their feedback.

AOAC International Names New CSO

By Cannabis Industry Journal Staff
No Comments

AOAC International, an independent nonprofit standards development organization has announced the appointment of Dr. Katerina (Kate) Mastovska as their new deputy executive director and chief science officer.

Dr. Katerina Mastovska

Most recently, Dr. Mastovska served as chief science officer for the Eurofins US Food Division. She has been an active member of AOAC for almost twenty years, winning the Harvey W. Wiley Award in 2021, their highest scientific honor. “I’m delighted to join the AOAC staff and lead the team of dedicated scientists,” says Dr. Mastovska. “AOAC has a critical role in food safety, and I’m inspired to continue to be a part of this important work.”

AOAC International works actively in the cannabis industry through their Cannabis Analytical Science Program (CASP), a working group established in 2019 that is dedicated to developing standardized methods in cannabis testing. In the world of cannabis lab testing, AOAC International creates standards under the standard method performance requirements (SMPR®) moniker, which are detailed descriptions of what analytical methods should be able to do.

More recently, CASP launched their own proficiency testing program last year and launched their first round, shipping samples to labs across the country in the Fall.

The 3-Legged Stool of Successful Grow Operations: Climate, Cultivation & Genetics – Part 6

By Phil Gibson
No Comments

This is Part 6 and the final chapter in The 3-Legged Stool of Successful Grow Operations series. Click here to see Part 1, here to see Part 2, here to see Part 3, here for part 4 and here for Part 5.

Standard Operating Procedures (SOPs)

Figure 1: Precision aeroponics at FarmaGrowers GMP Facility, South Africa

Every objective has to have a vision and a vector of where you want to go and what you want to achieve. “Winging it” is okay for an innovative artistic endeavor where creativity is spontaneous and one-of-a-kind art is produced. Unfortunately, that is not how one creates a top-quality cultivation operation.

Customers expect guarantees of consistency; quality assurance means a purchase is safe to consume. Medicinal products around the world require Good Manufacturing Practices (GMP) certification. These are really just SOPs that document repeatable procedures to guarantee that the most recent batch offers the same results as the first certified effort. This brief covers the importance of documented operating procedures for a successful grow business with high quality customer results.

Figure 2: The objective – trichome covered flowers, DanCann, Denmark

Almost nobody gets excited about discussing quality, but experienced manufacturers know that quality control reduces waste and improves operations. Everyone learns that they have to implement feedback, improvement and quality control procedures to guarantee profitability and longevity in any business.

So, what is an SOP? A standard operating procedure defines ‘a task’ to be performed ‘at a location by a person or a role on a specific schedule.’ These definitions will include role definition, responsibilities, personnel training, equipment & service procedures, material handling, quality assurance controls, record keeping, approved procedures & instructions, documentation, references and appendices, all of which define your business and how it is to operate.

Now, you might ask, we are just growing plants, is all this really necessary? The short answer is, it depends. If you expect to export globally, do business in Europe and other markets, get licensed by Health Canada or some day be approved to ship to other States, then yes. If you are a regional craft cannabis supplier, maybe not, but there are many tasks that are required to grow where a better documented process can benefit your operation and the quality of the product delivered to your consumers.

Figure 3: Flower maintenance, DanCann, Denmark

We provide a bulleted list of recommendations in the full white paper but to touch on a few highlights that every operator should keep in mind, SOPs define the following structures for your business.

Personnel training is done for ‘this task, in this way’ & ‘this role is responsible’

Job descriptions reduce misunderstandings and increase worker ownership in your facility. Documenting your activities minimizes task overlap and conflicts that can lead to no one executing on something that may be important but not urgent. You want to eliminate employees thinking “I didn’t know it was my responsibility.”

Consultants or visitors must be aware of and follow the same requirements as your employees if you are to maintain the quality of your grow. Specific training should be given to anyone that handles or works around toxic chemicals. Safety sheets are not just paper; They keep people alive.

Equipment & Service Procedures

Be direct and specific in your task definitions, i.e., “Use 5ml of soap, clean until no plant matter or debris remains.”

Figure 4: Full GMP certified facility, FarmaGrowers, South Africa

Ideally, grow facilities, equipment and access will be designed with cleaning in mind from the start. This is not always possible but it is the mark of successful manufacturing or production companies.

Cleaning, cleaning, cleaning: think sterile, food safety and consumer consumption protections. SOPs should define cleaning methods and materials. This cleaning is done on schedule and aligned to your preventative maintenance and calibration requirements. Precise results require precise structure for any long-term operation.

We recommend that you integrate pictures and videos in the instructions for your procedures and training so that nothing is left to chance or misinterpreted.

Material Handling, Containers, Labels, Quality Assurance

Personnel contamination/cross-contamination are the death of any grow operation. Do everything you can to limit stray or wandering plant material, dust or debris from migrating from one grow room or area to another. Isolation is a good way to limit outbreaks to a specific room to minimize losses.

Figure 5: Documented SOPs must be followed & reviewed regularly

If something nasty happens to one of your rooms. Good labeling enforced by your quality assurance team is a simple way to increase the likelihood that employees will do a task as intended. This adds to your repeatability as people change jobs or roles are redefined.

Approved Procedures & Instructions

Quality assurance is all about repeatability and intended outcomes. Documenting procedures and intended use enables every new employee to follow the experience of the masters and duplicate their success. Testing, sampling and logging your results along the way enables you to know that you are on schedule and on process, so you can predict your results every time.

Part of your continuous improvement approach will be to deal with exceptions that are not covered by your procedures. Learning about those exceptions and capturing your experience with an improved method will lead to better outcomes the next time around.

Documentation, References, Appendices

Figure 6: Flower sealed & ready for export, DanCann, Denmark

You’ve done all of this hard work to capture your operation, so you need a complete library of your reference work and approach that employees can access. It does your operation no good if you capture your methods and no one ever looks at them again. Training cycles and reviewing your defined procedures is key to a consistent high-quality result.

Hero Award

Standard Operating Procedures (SOPs), Good Manufacturing Procedures (GMP) and Good Agricultural & Collection Practices (GACP), are all terms that will become more familiar as cannabis production joins into one global market. Professional results will be required and national or international certifications will be the guarantees that any global customer can trust that a product meets the standards they expect.

We have many customers in North America and around the world. but DanCann Pharma is the most aggressive when it comes to meeting international standards and results. Producing flower that is so pure that no irradiation is required for export, the DanCann operation is fully certified for production throughout Europe and they are sold-out of capacity for the coming year. They are currently expanding their operations in Denmark and are a solid example to follow for a well-defined repeatable operation. FarmaGrowers in South Africa is a close second in this race with multiple export certifications of their own. The future looks bright for both of these global operations.

For the complete white paper on Top Quality Cultivation Facilities, download the document here.

2022 Cannabis Labs Virtual Conference: December Program

By Cannabis Industry Journal Staff
No Comments

2022 Cannabis Labs Virtual Conference: December Program

Sponsored by Avivatech & Millipore Sigma

Click here to watch the recording

Agenda

Potency Inflation: The Problem, the Causes and the Solutions

  • Sarah Otis, Quality, R&D Manager, Anresco Laboratories
  • Erik Paulson, Ph.D., Lab Manager, InfiniteCAL

THC potency inflation by third-party testing labs has been an escalating feature of the cannabis industry since its legalization. In California, market forces and lack of regulation have allowed potency inflation to intensify in both its flagrancy and its pervasiveness, particularly within the last year. Two third-party testing labs in California, InfiniteCAL and Anresco, discuss how the industry got to this point, the different methods that labs use to inflate potency, and steps that can be taken to combat it.

TechTalk: Avivatech

  • Shawn Kruger, Senior Vice President of Product & Strategy, Avivatech

The Laboratory Information Landscape in Cannabis Testing

  • James Brennan, Sales & Marketing Specialist, LabWare
  • Eugene Olkhov, Data Scientist, LabWare

This presentation will guide attendees through the data continuum in modern cannabis testing laboratories supported by various software solutions. The presenters will describe the business and regulatory benefits of laboratory informatics and system deployment options, challenges, and financial considerations.

  • The current flow of cannabis testing data
  • An overview of informatics solutions for cannabis testing labs
  • Laboratory informatics and regulatory compliance
  • The impact of digital transformation on cannabis testing data

TechTalk: MilliporeSigma

Cannabis Testing Regulations & Implications for Environmental Monitoring

  • Sarah Powell Price, Regulatory Expert for Food Safety & Cannabis for North America, MilliporeSigma
  • Anne Connors Weeks, Senior Field Marketing Manager, MilliporeSigma

Cannabis testing requirements are continuously evolving, as are analyte detection capabilities.  This presentation provides a high level overview of the latest US cannabis testing regulatory landscape and how environmental monitoring is an essential component of safety and compliance planning.

Click here to watch the recording

The 3-Legged Stool of Successful Grow Operations: Climate, Cultivation & Genetics – Part 5

By Phil Gibson
No Comments

This is Part 5 in The 3-Legged Stool of Successful Grow Operations series. Click here to see Part 1, here to see Part 2,  here to see Part 3, and here to see part 4. Stay tuned for the final piece in the series, Part 6, coming in the new year.

Genetics

With climate and cultivation methods explored, today, we cover the third leg in the primary stool, genetics. Some would say good genetics is all that you need and anyone can be successful with good genetics. We all know that this is not experience talking. Things can go wrong, even with great genetics. Here are some inputs how to pick great genetics so you have them on your side.

Hybrids & Strains

Seeds, the beginning of genetic performance

Everything successful cultivators grow is aligned to their consumer audience. This is hard to predict as the desires in your market will migrate over time as one variety will be highly popular and poof, it’s not, so constant change is necessary. Finding the right flower at the right time is the trick.

The first thing to decide in your pursuit of the ideal phenotype (or pheno-hunt) are your target customers. Assuming you’ve made the choice to go “top-shelf” for aeroponic or hydroponic flower, your variety selection comes down to filial breeder seeds or stable strains from suppliers you know.

Filial hybrids are developed by professional breeders. Two distinct inbred strains are repetitively crossed until their traits are highly consistent. At this point, these carefully inbred lines are crossed to selectively mix the two well defined sets of traits. Filial hybrids are stable and you can usually rely on the robust nature of these seeds.

Strains, on the other hand, are the cross of two strains but they may not be inbred stable filial strains. Sometimes this results in something amazing, but just as randomly, the traits can morph into something disappointing.

Our advice here is to pay the premium and start with high quality reliable stock.

Uniformity

Consistency? Will you grow one variety or multiple varieties per room and per harvest; will they grow well together? Do they grow and test out in a consistent manner (plant size, color, bud size & yield, tested terpene profiles, aroma, disease resistance or tolerance). Are you growing for top shelf flower or bulk extraction? I will focus this discussion on top shelf flower. Premium seeds from professional filial hybrids are not a guarantee, but they are designed to be stable and consistent in their growth and results targeting high performance.

High cannabinoids: 420Kingdom Grapes & Cream

Here, experience counts and reliable seed vendors tend to be well established with filial lines that are worth the investment. Once you acquire your genetics, how to leverage that investment?

Killer Genetics

What traits does your consumer want? Initial searches usually target THC or CBD levels and they evolve to special terpene profiles or pleasing aromas. Flower or bud shape, color, size, density, and stickiness are also traits that can differentiate your genetics. As a producer, you also want to target yield including tall or stretching genetics, or short and fast flowering, germination rates (sometimes they don’t) and percentage of likely hermaphroditing (seldom zero). The qualitative aspects (smoking characteristics) of your production flower that deliver a unique customer experience, both real and imagined, wrap up your brand experience.

So, as you can guess, one size does not fit all types of consumers. Very high yielders that are immediately targeted for extraction offer very different values than perhaps a smaller yielding very potent top shelf smokeable bud. It is a good strategy to plan for a handful of strains that you can bring to market so you have something that will hit the sweet-spot when you deliver your harvests.

Seeds

Seeds with documented guarantees from reliable sources eliminate the characteristic risk, and with the right testing reports, they guarantee no pathogens as well.

The challenge of seeds can be genetic variation, as discussed above, depending on the stability of the commercial breeder. This potential variance can lead to surprises and disappointment. Starting from seed also takes more time to germinate the seeds, exterminate the males, grow mother plants, take cuttings, and start the cycle. This can add 12-16 weeks to your go-green targets for your flower rooms. Be sure to integrate this cycle time planning into your production cycle.

Clones

Insourced clones are the fastest way to go green and move through veg to produce flowering plants and bud harvest. Clones are created by taking a branch cutting from a “mother” plant and typically “rooting” that cutting using an aeroponic cloning system. This clone process can take a few days or weeks depending on the grow environment and aeroponics process. A rooted clone maintains the genetic characteristics and phenotype of the mother plant.

The typical way smaller grow shops get started is through buying clones that are made from these rooted branch cuttings. The combination of mother plants, clones, and sometimes “veg” plants are gathered together in a “nursery”. Nurseries need to be stable for long periods of time to produce the veg growth necessary for cuttings. This time delay makes it harder for the nursery provider to keep the area sterile, without disease, and without pests. If the mothers carry a disease, they are likely to transfer that biologic over to the cuttings. If the media that the clones are grown in picks up root gnats, they will travel with the clones into your facility. The short answer is source your clones from professionally run operations. This trust is worth every penny.

Blue Dream clone array: AEssenseGrows

Insourcing clones allows you to avoid the cost and complexity of running a “nursery”, but this also moves the pest management and quality of mother stock and clones outside of your control zone. In other words, you depend on the clone supplier for both healthy plants AND availability. No clone available from your supplier means no flower in your grow rooms. Your production revenue depends on the reliability of your clone supplier in many ways.

In some grow operations, the nursery is extended to cover the vegetative growth stage of cannabis plants or “veg.” In other approaches, a flower room is occupied for an additional week or two for veg growth. We at AEssenseGrows are strong advocates of running all cloning and vegging activity in a vertical aeroponic nursery in parallel to your flower rooms

Mothers, clone, and veg stages all grow with a vegetative growth light schedule (18 hours on, 6 hours off). The typical process is to take a cutting from a mother plant, place that in an aeroponic “cloner” for 10-12 days until a healthy set of roots is formed for the cutting. That clone is then typically pinched off at the top of the plant at which point the veg stage can begin. Light intensity is gradually increased and the plants are typically vegged for an additional 2 weeks, at this point, you have a bushy veg plant that is ready for a 12/12 light cycle and flowering.

In aeroponics, all of this is done in nursery space. If you choose to use soil or grow media approaches, a series of increasingly larger buckets or rockwool cubes are needed to manage the veg stage and the transition to flower. This can be done in a dedicated veg room or for the first week or two in the flower rooms

Tissue Culture

Healthy Agent Orange mothers: Onyx

Another method for creating your young plants is tissue culture. This is the method of harvesting genetic material from an existing plant with desired characteristics. These genetic samples can be contamination free and even supplied by a genetic bank. A portion of these tissues are cultured in a gel grow tray and the plant will develop roots with a stalk that reaches upward for light energy.

These plant starts are hardened in a similar method to cloning and typically, these starts are grown into mothers that supply your cuttings for the clone cycle. This is an advanced method, so plan for research and development with expected delays to the front end of your sourcing cycle if you choose this path.

Strain Examples

Selecting the best genetics for your market is an art form. Many choices abound. High yielding dense classic strains are Blue Dream, Skittles, Sour Diesel and Girl Scout Cookies. Each of these deliver a typical 18%-24% THC content from fast growing, medium height high plants that yield dense buds. Very potent THC genetics that are popular currently are various “OG” genetics, Bruce Banner, various “Cake” genetics and Kush options. Variants of these run from 25% to 35% THC content.

This Chapter’s Hero Award

Every customer produces great results for their markets but we are very impressed by the genetic selections by 420Kingdom in the central valley of California. Jeffrey Thorn is the owner there and continues to impress with a range of high potency genetics that demand premium prices and sell out regularly in their highly competitive market.

With good genetics for your consumers, you are positioned to be successful. Advanced cultivation methods like aeroponics and hydroponics can give you a lift and the right environment and nutrition helps you tie this all together. Our next and last chapter will cover consistency and repeatability through Standard Operating Procedures (SOPs).

First Pharma vs Cannabis Clinical Trial Moves Forward

By Christina DiArcangelo
No Comments

Affinity Bio Partners on Working with Zelira Therapeutics to Complete Enrolment for Diabetic Nerve Pain Drug Trial

It’s an exciting time in the medical cannabis community as Zelira, a global leader in the research, development and commercialization of clinically validated cannabinoid medicines, and Affinity Bio Partners, a leading, global clinical research organization, have completed enrollment for a diabetic nerve pain drug trial. The Institutional Review Board (IRB)-approved head-to-head trial read out is expected in Q1 of 2023. Two years in the making, the study’s clinical management, clinical trial site monitoring, subject recruitment, regulatory submissions and review and query of data have brought us to a pivotal point that could pave the way for how future clinical studies are conducted in the medical cannabis community. As someone who comes from traditional pharma and biotechnology industries, heading up a clinical study in the medical cannabis realm has been a significantly different, eye-opening and informative experience that reinforces the dire need for mainstream, medical cannabis education.

Difficulties of Enrolling Subjects in a Cannabinoid-Based Clinical Study 

There are a number of reasons that enrolling a cannabinoid study is very challenging. One of the biggest challenges to overcome is creating educational clinical study material that will be approved by the Institutional Review Board while educating potential subjects who are interested in enrolling. In other words, one must fully understand the regulatory landscape that they’re operating in, and we all know cannabis is a tricky one, while still educating potential subjects.

When screening subjects, it is important to be able to thoroughly share facts regarding cannabinoids, terpenes and other ingredients utilized in the study material. Also, sharing information on the endocannabinoid system is important, and a must for subjects to understand. In addition, it is integral to share and contrast between the traditional pharmaceutical products versus the cannabinoid study drug. Meaning, most subjects understand and are familiar with pills and other treatments approved in the traditional FDA regulated pharmaceutical space. Therefore, you must ensure that you create a bridge between a study’s educational materials and the lack of mainstream education about cannabinoid-based therapies.

The Impact This Will Have on Future Cannabinoid-Based Clinical Studies

There is a lot of hope that by working on a study of this magnitude, that we will pave the way for many more companies to bravely enter the clinical trial space as it pertains to medical cannabis. Everything that is being performed in this Zelira clinical study is in accordance with all applicable laws and regulations. The team is utilizing an electronic patient reported outcomes and electronic data capture system to receive data directly from the clinical trial sites as they are seeing the patients. As more patients, groups, communities and organizations learn about this, we hope that other large players in the cannabis industry invest their money wisely and perform clinical studies on their formulated products. Companies are unable to make claims of product safety and efficacy legally without these clinical studies. As we approach 2023, it is time for us as an industry to begin forecasting future clinical studies that will help power the therapeutic benefits this plant has to offer in responsible, controlled settings.

The 3-Legged Stool of Successful Grow Operations: Climate, Cultivation & Genetics – Part 4

By Phil Gibson
No Comments

This is Part 4 in The 3-Legged Stool of Successful Grow Operations series. Click here to see Part 1, here to see Part 2, and here to see Part 3. Stay tuned for Part 5, coming next week.

Integrated Pest Management (IPM)

Aeroponic & hydroponic systems can operate with little to no soil or media. This eliminates the pest vectors that coco-coir, peat moss/perlite and organic media can harbor as part of their healthy biome approach. Liquid nutrient systems come at the nutrient approach from a different direction. Pure nutrient salts (nitrogen, potassium, magnesium and trace metals) are provided to the plant roots in a liquid carrier form. This sounds ideal for integrated pest management programs, but cultivators have to be aware of water and airborne pathogens that can disrupt operations. I will summarize some aspects to consider in today’s summary.

The elimination of soil media intrinsically helps a pest management program as it reduces the labor required to maintain a grow and the number of times the grow room doors are opened. Join that with effective automation with sensors and software, and you have immediate improvements in pest access. Sounds perfect, but we still have staff to maintain a facility and people become the number one source of contamination in a grow operation.

Figure 1: Example of Pythium Infected & Healthy Roots

Insects do damage directly to plants as they grow and procreate in a grow room. They also carry other pathogens that infect your plants. For example, root aphids, a very common problem, are a known carrier of the root pathogen, Pythium.

Procedures

One of the most common ways for pests to access your sealed, sterile, perfectly managed facilities are in the root stock of outsourced clones. If you must start your grow cycles with externally sourced clones, it is strongly recommended that you quarantine those clones to make sure that they do not import pest production facilities into your operation. Your operation management procedures must be complete. If you take cuttings from an internal nursery of mother plants, any pathogens present in your mother room will migrate through cuttings into your clones, supply lines, and subsequently, flower rooms.

Figure 2: Healthy Mothers & Clones, Onyx Agronomics

Start your gating process with questioning your employees and visitors. Do they grow at home or have they been to another grow operation in the last week? In the last day? You may be surprised by how many people that gain access to your grow will answer these questions in the affirmative.

Developing standard operating procedures (SOPs) that are followed by every employee and every visitor will significantly reduce your pest access and infection rates, and hence, increase your healthy harvests and increase your profitability. Procedures should include clothing, quarantining new genetics and cleaning procedures, such as baking or irradiating rooms to guarantee you begin with a sterile facility. This is covered more in the complete white paper.

Engineering Controls

Figure 3: Access Control: Air Shower, FarmaGrowers

Technology is a wonderful thing but no replacement for regimented procedures. Considered a best practice, professional air showers, that bar access to internal facilities, provide an aggressive barrier for physical pests. These high velocity fan systems and exhaust methods blow off insects, pollen and debris before they proceed into your facility. From that access port into your grow space, positive air flow pressure should increase from the grow rooms, to the hallways, to the outside of your grow spaces. This positive airflow will always be pushing insects and airborne material out of your grow space and away from your plants.

Maintaining Oxidation Reduction Potential (ORP)

ORP is a relative measurement of water health. Perfect water is clear of all material, both inert and with life. Reverse osmosis (RO) is a standard way to clear water but it is not sufficient in removing microscopic biological organisms. UV and chemical methods are needed in addition to RO to clear water completely.

ORP is an electronic measurement in millivolts (mV) that represents the ability of a chemical substance to oxidize another substance. ORP meters are a developing area and when using a meter, it is important to track the change in ORP values rather than the absolute number. This is due to various methods that the different meters use to calculate the ORP values. More on this in the white paper.

Oxidizers

Figure 4: AEssenseGrows Aeroponic Nozzles

There are two significant ways to adjust the ORP of a fertilizer/irrigation (fertigation) solution. The first is by adding oxidizers. Examples are chemical oxidizers like hydrogen peroxide (H2O2), hypochlorous acid (HOCl), ozone (O3) and chlorine dioxide (ClO2). Adding these to a fertigation solution increases the ORP of the fertigation solution by oxidizing materials and organic matter. The key is to kill off the bad things and not affect the growth of plants. Again here, the absolute ORP metric is not the deciding factor in the health of a solution and the methods by which each chemical reaction occurs for each of these chemicals are different. This is compounded by the fact that different ORP meters will show different readings for the same solution.

Another wonderful thing about automation and aeroponic and hydroponic dosing systems is that they can automatically maintain oxidizing rates and our white papers explain the methods executed by today’s automation systems.

Water Chilling

Another way to adjust ORP is to reduce the water temperature of the reservoirs. Maintaining water temperature below the overall temperature of your grow rooms is imperative for minimal biological deposition and nutrient system health. Water chillers use a heat exchanger process to export heat from liquid nutrient dosing reservoirs and maintain desired temperatures.

The benefit of managing ORP in aeroponic and hydroponic grow systems is highly accelerated growth. This is enhanced in aeroponics due to the effectively infinite oxygen exchanging gases at the surface of the plant roots. Nutrient droplets are sprayed or vaporized in parallel and provided to these root surfaces. Maximizing the timing and the best mineral nutrients to the root combustion is the art of grow recipe development. Great recipes drive superior yields and when combined with superior genetics and solid environmental controls, these plants will deliver spectacular profits to a grow operation.

Another Hero Award

Before closing this chapter, we have many cultivators that are producing stellar results with their operational and IPM procedures, so it is hard to choose just one leader. That said, our hats are off to RAIR Systems again and their director of cultivation, Ashley Hubbard. She and her team are determined to be successful and drive pests out of their operations with positive “little critters” and the best water treatment and management that we have seen. You are welcome to view the 7-episode walkthrough of the RAIR facility and their procedures here.

To download the complete guide and get to the beef quickly, please request the complete white paper Top Quality Cultivation Facilities here.

Stay tuned for Part 5 coming next week where we’ll discuss Genetics.