Tag Archives: protection

U.S. Senators to Treasury: Protect Banking for Cannabis

By Aaron G. Biros
No Comments

On Wednesday, ten U.S. Senators from both sides of the aisle signed a letter pleading with the U.S. Treasury Department to help with banking for cannabis businesses, according to Lisa Lambert of Reuters. The letter seeks some form of protection for cannabis-friendly banks and credit unions, even those doing business with ancillary companies.

Notable signatories include Senators Elizabeth Warren (D-Massachusetts), Bernie Sanders (D-Vermont) and Jeff Merkley (D-Oregon). “Most banks and credit unions have either closed accounts or simply refused to offer services to indirect and ancillary businesses that service the marijuana industry,” states the letter. “A large number of professionals have been unable to access the financial system because they are doing business with marijuana [sic] growers and dispensaries.”

U.S. Capitol in early December Photo: US Capitol, Flickr
U.S. Capitol in early December
Photo: US Capitol, Flickr

According to a spokesman, the Treasury Department’s Financial Crimes Enforcement Network will be addressing it. It is unclear exactly how Sen. Jeff Sessions, Trump’s attorney general nomination, would deal with cannabis-friendly states, let alone banking for them.

Many think Sessions would restrict access, ramp up federal crackdowns and make it difficult for cannabis businesses to grow. Once again however Jeff Sessions has not shared any plans on enforcing the Controlled Substances Act or cracking down on legal cannabis.

Cannabusiness Sustainability

Packaging: Four Sustainability Principles

By Brett Giddings, Olivia L. Dubreuil, Esq.
No Comments

As with any product, packaging has a vast range of sustainability considerations that should be accounted for in its design, development and use. Often the most visible component of any product, and certainly so for most forms of cannabis products, packaging is a key sustainability issue for the entire cannabis supply chain.

What is sustainable cannabis packaging and what does it look like? This can be a loaded question, but one we can revisit after considering the basic functions of packaging.

Cannabis packaging, and packaging generally, is designed to perform three basic functions: protection, preservation and promotion. If it does not adequately address these three areas then the chance of product failure, loss of consumer trust and increased waste is likely.

Let’s take a high level look at each of these:

  • Protection: Whilst cannabis is not currently travelling huge distances, like some of the food we consume, protection is key at each point of the supply chain. Inputs into the growing process often come packaged, flowers and such are packaged for shipping and storage, bulk-packaged cannabis is sent to dispensaries, extractors, etc, and ultimately re-packed into what will become the consumer-facing packaging. Importantly for cannabis, it may require an additional level of protection to ensure children are not able to access the contents.
  • Preservation: Like any consumable item, cannabis has a shelf life, and packaging plays a key role in preserving the usability of the product. Whether it is a chocolate, a cannabis-infused drink, or flowers, it is critical that each product maintains a certain level of quality and consistency.
  • Promotion: Packaging allows one part of the supply chain to communicate specific elements of a product to those further along the supply chain. The most obvious, and for cannabis probably the most important, is the communication of contents within a packaged item (labeling), such as the percentage of CBD in a gummy or origin of a particular bud. Packaging is also the reflection of a brand, an image.

Taking these basic elements into account, we can apply a framework for designing and choosing more sustainable packaging. This framework for cannabis packaging accounts for and balances four principles: Fit for purpose, efficient, low impact and re-usable.

Fit-for-purpose. Essentially, this involves making sure that the packaging adequately performs the ‘3-Ps’ above. Packaging commonly accounts for less than 10% of the energy inputs that have gone into a complete product (for example, a candy packaged in a foil-lined plastic wrap). If the packaging fails to protect and preserve the candy, then the energy (or the water, the material, the investment) embedded in the product it contains is wasted.

The second principle relates to material efficiency. Once the packaging works, it is then important to minimize material and resource inputs. Effectively designed packaging uses lighter-weight materials and reduced numbers of materials and components. It also reduces air space and maximizes transport yields.

The third principle involves using low-impact materials. Material inputs should come from non-controversial sources, such as verified/certified supply chains and suppliers that have been assessed to ensure appropriate sustainability-related issues are addressed. Wherever possible, consider renewable and recycled-content inputs, and those made using renewable energy.

Finally, cannabis packaging should be re-usable, recoverable and/or recyclable at end of life. Consider materials and design formats that can be reused multiple times, and packaging that can be recycled and composted by consumers in the systems readily available. Linking back to the third ‘P’, Promotion can be used to make sure that your packaging clearly communicates what someone should do with your packaging. If it is recyclable, returnable, reusable or plantable, tell them it is and how to proceed.

Bear in mind that the most sustainable packaging options are often the result of thinking outside the box. The design process of your packaging should include brainstorming and researching outside of your own industry. What are new and innovative solutions, new materials, new ways to think about product conception that could negate the need for unnecessary packaging elements. New and innovative packaging solutions can raise your business’ profile, catch consumers’ attention and attract investors. It showcases your business as a forward-thinking one.

Packaging sustainability can look different for each and every cannabusiness. It is important to make sure that the four principles are part of your packaging selection/design process. As with any other sustainability issue, it is best to start thinking about packaging early on, and considering packaging as a part of the actual product system.

If you are not thinking about packaging sustainability, be assured that regulators, consumers and your industry peers are. Make sure you are driving the discussion about packaging, rather than being driven by those who may not fully understand your packaging needs.

Marijuana Matters

Patent Options Available for Breeding Cannabis

By David C. Kotler, Esq.
No Comments

Patent No.: 909554. Date of patent: August 4, 2015. Years from now, historians and academics may look back on this patent number and date as a watershed mark in the evolution of legal cannabis. Feel free to read the 147 pages of the patent documents but, in short, it “leads to many innovations, provides compositions and methods for breeding, production, processing and use of specialty cannabis.” It was the first time that the U.S. Patent Office (USPTO) had issued a patent for a plant containing significant amounts of THC. One USPTO spokesman recently discussed with a journalist that “there are no special statutory requirements or restrictions applied to marijuana plants.” The following is a broad, and I mean really broad, overview of the options available to protect intellectual property within the cannabis species and strain realm.

Generally speaking, to be patent eligible, an invention must be useful, it must be new, it cannot be obvious and it must be described in a manner so that people of skill in the relevant specialty can understand what the invention is, make it and use it without engaging in undue experimentation. In terms of cannabis, essentially the breeder must have created a new and non-obvious strain over what already exists that is useful such as being highly resistant to molds or having a specific concentration of CBD.

Breeders potentially have a number of options available to them, despite the common belief otherwise. In the U.S. there are five types of intellectual property protection that breeders can obtain for new plant varieties or their use of clones:

One may seek protection for seeds and tubers, known as Plant Variety Protection. A tuber is essentially a swelled root that forms a storage organ. The Plant Variety Protection Office provides this protection. To apply for Plant Variety Protection, the applicant submits information to show that the variety is new, distinct, uniform and stable.

For asexually propagated plants except for tubers, a Plant Patent may be sought. These are sought through the USPTO. This is relatively inexpensive compared with a Utility Patent covering the genetics.

Trade secrets are often used to protect inventions that will not be commercially available or cannot be reverse engineered. For example, if a new strain is invented but is only commercially available in its final form, trade secret protection may be the best form. The most important thing to remember is that a company must follow a strict set of requirements to keep the trade secret confidential.

The last patent type protection could be through a Utility Patent. A Utility Patent can be issued for any type of plant showing its utility. These are issued by the USPTO. Seeking and obtaining a Utility Patent is expensive and complex.

In addition to Patent Protection, breeders may seek Contractual Agreements restricting the use of the clones (i.e. a material use agreement). The parameters that a breeder wishes to craft can essentially be crafted into the language of any type of agreement that is drafted to memorialize the relationship and terms between the parties.

A few broad-stroke items to keep in mind with regard to patents particularly relative to the patenting of cannabis strains and the like: First, is the passage of the America Invents Act which among other changes allowed for the U.S. to transition from a First-to-Invent patent system to a system where priority is given to the first inventor to file a patent application. Second, there are the potential bars based on different types of prior use.

Any discussion about the foregoing topic should necessarily include the question: Is it really good for the cannabis industry and its evolution? The dialogue moves out of one steeped in tradition, lure of trips through mountain passages, and potentially patient benefit or in search of higher quality and into connotations of business law and big businesses sweeping in to take over. It is an expensive process. It may be inevitable. In the meantime, protect yourself as best you can and as you see fit.