Learning from The First Wave Part 3: Seven Basic Questions About Local Cannabis Ordinances & Real Estate

By Todd Feldman

Part One of this series took a look at how the regulated cannabis market can only be understood in relation to the previous medical market as well as the ongoing “traditional” market. Part Two of the series describes how regulation defines vertical integration in California cannabis.

If you are considering getting involved in California cannabis, imagine the following sentence in ten-foot-tall letters made out of recently ignited $20 bills:

Before you put any money down on property, carefully examine the local cannabis ordinance and tax rates.

This article is written in the form of advice to a newbie cannabis entrepreneur in California, but it will discuss issues that are also of significance to investors, as well as (to various degrees) cannabis entrepreneurs in other states.

Here are seven basic questions that you need to ask about local regulations (in order, except for Number 7).

1. What’s Your Jurisdiction?

If you’re in city limits, it’s the city. If you’re outside city limits, it’s the county.

2. Does the Jurisdiction Allow Cannabis Activities?

If the answer is yes, go to the next question. If the answer is no, pick another jurisdiction.

3. Where Does the Jurisdiction Allow Cannabis Activities?

A zoning ordinance will limit where you can set up shop. The limitation will probably vary by license type.

4. How Does the Local Ordinance Affect Facility Costs?

The short answer is: in many ways. Your local ordinance is a Pandora’s box of legal requirements, especially facility-related requirements.¹ Read your local cannabis ordinance very carefully.

Generally speaking, the cannabis ordinance will set out two types of requirements – those that are specific to cannabis and those that apply generally to any business.

Looks great but . . . where are the sprinklers? Does it need a seismic upgrade? How about floor drains?
Photo by Wilhelm Gunkel on Unsplash

Cannabis-specific requirements:

Typically incorporate state cannabis laws by reference.
Have significant overlaps with state cannabis laws. For example, the state requires commercial-grade locks and security cameras everywhere cannabis may be found on a given premises. Local ordinances generally include similar requirements – keep in mind that you will need to comply with a combined standard that satisfies both state and local requirements.²
Vary greatly according to type of activity. For example, manufacturers will need to comply with Health & Safety Code requirements that can have a major impact on construction costs.
Vary greatly by jurisdiction when it comes to equity programs.

General requirements:

Include by reference building and fire codes, which can require very expensive improvements. Note that this means your facility will be inspected by the building department and the fire department.
Can include anything from Americans with Disabilities Act (ADA) requirements to city-specific requirements, such as Design Guidelines.
Will be zealously enforced because you’re a cannabis business.

5. What is the Enforcement Policy?

It may be that your local jurisdiction will give you temporary local authorization after meeting some, but not all, of the requirements. For example, you may be able to begin operations once you’ve provided your city or county with your cannabis permit application, a zoning clearance and a business permit. In this jurisdiction, you would be able to bring your building up to code sometime after you begin operations.

On the other hand, your local jurisdiction may require you to meet every requirement – from cannabis-specific security requirements to general building code and ADA requirements – before you can begin operations. Depending on the type of cannabis business (and facility condition), this might be inconsequential. Or it might mean that you will have to pay more than a year’s worth of rent (or mortgage) before you can start making money.

6. Can You Choose a Facility That Saves You Time and Money?

Of course, you won’t have to spend much time or money bringing your facility up to code if it’s already up to code. How likely it is that you will find such a facility varies wildly according to the type of cannabis activity in question. In general:

Service-side activities (delivery retail, storefront retail, distribution) are in many respects similar to their non-cannabis counterparts. From a facilities standpoint, the major differences come from security requirements. So, it may be possible to save time and money by choosing a facility that is already up to code for a similar use.
Manufacturing activities are trickier, since you will need food-grade facilities and equipment. You may be able to save money by setting up shop in a commercial kitchen.
Extraction with volatile solvents is a special (and particularly expensive) case, since it is inherently dangerous and requires special facilities.
Outdoor cultivation may be relatively unproblematic if it has an appropriate water source.
Indoor cultivation is expensive because of climate-control and lighting requirements. Buildings potentially suitable for large-scale indoor grows frequently come with significant problems. Former warehouses will typically require major power upgrades, while former factories may have inconvenient architecture and/or hidden toxic waste. In all cases, internal reconstruction is likely to be necessary, and will trigger all sorts of building and fire code requirements.

7. What Are the Local Cannabis Taxes?

Cannabis tax rates may be determinative. For example, Oakland imposes a 6.5% gross receipts tax on manufacturers that have gross receipts of less than $5M, and 9.5% on manufacturers that have gross receipts over $5M. In comparison, Santa Rosa only imposes a 1% gross receipts tax on manufacturers.

Local cannabis ordinances and taxes can make or break your business, so you need to understand them before you commit to a location. The seven basic questions listed above are designed to get you started.

This article is the opinion of the author and is not intended to be legal or other advice.

References

For example, see Part II of the City of Oakland’s Administrative Regulations and Performance Standards, and The City of Los Angeles’s Rules and Regulations for Cannabis Procedures No. 3 (A)(14).
For example, compare 16 CCR § 5044 (“Video Surveillance System”) with The City of Los Angeles’s Rules and Regulations for Cannabis Procedures No. 10 (A)(7).

February 9, 2021

Learning from the First Wave Part 2: California’s Cannabis Supply Chain and Vertical Integration, with a Grain of Salt

By Todd Feldman

No Comments

A Grain of Salt

Take the conventional wisdom about vertical integration with a grain of salt. Expected benefits may not materialize under the current circumstances:

Overall, the business environment is highly challenging due to extensive regulation, over taxation, insufficient retail capacity and competition from the “traditional” market. As a result, integrating businesses upstream or downstream may mean capturing losses, not profits.
The three major types of cannabis activity span three major industrial sectors: raw materials (i.e., cultivation), manufacturing and service (distribution, testing and retail). As a result, a vertically integrated company needs to carry out very different types of activity, which require very different types of core competencies, equipment and facilities.
- Developing core competencies is especially challenging because each of the major cannabis sectors is still evolving.
- Realizing the benefits of vertical integration requires an additional core competency in cross-sector operations.

Regulations Define the Supply Chain

California’s regulations define the cannabis supply chain by defining both the individual links (licensees) and the relationships between those links. Therefore, an understanding of vertical integration must be grounded in an understanding of the underlying regulatory definitions.

The regulatory definition of each link is extensive. For example, each licensee is tied to a specific facility, and must have its own procedures for production, inventory control, security, etc. When the links are strung together, this definition tends to preserve operational redundancies, and impede operational integration.

Overall, the relationships between the links are primarily defined in terms of preserving the chain of cannabis custody. On top of that, regulations define very specific (and very consequential) links between certain licenses, as discussed below.

A Taxonomy of Links

There are currently 26 types of cannabis license in California, 25 of which can be vertically integrated:

Cultivation – 14 licenses, including 4 sizes each for Indoor (up to 22,0000 sf), Mixed Light (up to 22,000 sf) and Outdoor (up to 1 acre), as well as Nursery and Processor (drying, trimming and packaging/labeling). Note that cultivation licenses are the only licenses that restrict the scale of activities.
Manufacturing – 5 licenses, including volatile extraction, non-volatile extraction, everything but extraction (i.e., infusion) and packaging/labeling.
Testing (Type 8), for testing cannabis according to state standards prior to sale. The owner of a testing license cannot own any other type of license.
Distribution (Type 11), acts as the gateway between cultivation and manufacturing on the one hand, and retail on the other. The distributor’s gateway status is entirely an artifact of regulation – cannabis must be officially tested before it is sold to a consumer, and only a distributor can order the official test. All products must stay in a “quarantine” area at the distributor until they pass testing. Products that fail testing must be destroyed if they cannot be remediated.
Transport (Type 13), which can move cannabis between licensees (with a narrow exception). This license does not allow for official testing.
Storefront Retail (Type 9), which is the best license to have, and the hardest one to get.
Delivery Retail (Type 10), for delivery services that are subject to the vagaries of software platforms and the intransigence of local authorities.
Microbusiness (Type 12), which allows the licensee to carry out cultivation (up to 10,000 square feet), non-volatile manufacturing, distribution and retail.
Event Organizer

Self-Distribution – A Case of Useful Integration

You may gather from the previous section that shoving a gratuitous and mandatory distributor into the middle of the supply chain creates problems for cultivators and manufacturers. Savvy operators solve this problem by getting a distribution license. This allows the cultivator or manufacturer to:

Pick the time and place for the testing of its cannabis products.
Avoid paying someone else for the storage of cannabis products as they await test results or purchase.
Reduce transport costs (particularly if the distributor is near the other operations).
Sell directly to retailers.

The bottom line is that vertical integration in California cannabis is useful as a means to an end, as opposed to an end in itself. Therefore, cannabis operators should carefully consider how vertical integration will benefit their core business before incurring the risks and expenses associated with an additional license.

This article is an opinion only and is not intended to be legal advice.

February 2, 2021

Learning from the First Wave Part 1: How Law Shapes the California Cannabis Industry

By Todd Feldman

No Comments

As a cannabis lawyer, I spend a lot of time thinking about the ways that regulations affect a cannabis company’s bottom line. Since I’m in California, the ways are many.

In late 2017 I became the chief compliance officer for an Oakland startup that carried out delivery, distribution, cultivation and six manufacturing operations. A big part of my job was preparing my company, along with several equity cannabis companies, for California’s First Wave of cannabis licenses.

For the most part, First Wave licensees came from California’s essentially unregulated medical cannabis market, and/or from California’s by-definition unregulated “traditional” market. When California began issuing licenses in January 2018, many First Wavers were unprepared because their businesses practices had evolved in an unregulated market. A big part of my job was to help them adapt to the new requirements. As a result, I saw the regulations, and the effects of regulations, in sharp relief.

Regulation touches virtually every aspect of the legal cannabis industry in California. So anyone who wants to understand the industry should have at least a basic understanding of how the regs work. I’m writing this series to lay that out, in broad strokes.

Some key points:

The regulated market must be understood in relation to the previous unregulated (medical) market as well as the ongoing traditional market.
Regs define the supply chain.
Regs are designed to ensure product safety and maximize tax revenue.
Many regulations mandate good business practices.
Local enforcement of building, health and safety codes tends to be zealous and costly.

A Tale of Three Markets

California’s regulated cannabis market can only be understood in relation to the medical market that preceded it, and in relation to the traditional market (illegal market) that continues to compete with it.

The Before Times

California’s legal medical cannabis market goes back to 1996, when the Compassionate Use Act passed by ballot measure. One fact that shaped the medical market was that it was never just medical – while it served bona fide patients, it also served as a Trojan horse for adult-use (recreational) purchasers.

Another fact that shaped the medical market was a near complete lack of regulation. On the seller’s side, you had to be organized as a collective. On the buyer’s side, you had to have a medical card. That was it.

Meanwhile, the cannabis supply chain was entirely unregulated. This tended to minimize production costs. It also meant that a patient visiting a dispensary had no way of verifying where the products had been made, or how.

The Regulated Times

Licensing under the Medical and Adult-Use Cannabis Regulation and Safety Act (the “Act”) began on January 1, 2018. It was the beginning of legal adult-use cannabis in California. It was also the beginning of the Regulated Times, as the Act and accompanying 300-plus pages of regulations transformed the legal cannabis market.

For example:

The Act defines the cannabis supply chain (as a series of licensees).
Across the supply chain, the internal procedures of cannabis companies are subject to review by state agencies;
Cultivators and manufacturers cannot sell directly to a dispensary – they must go through a distributor;
All cannabis must be tested for potency and a long list of contaminants by a licensed testing laboratory before it may be sold to consumers;
And beginning in 2019, all licensees were required to participate in the California Cannabis Track and Trace (CCTT) program, which is designed to track all cannabis from seed to sale.

Just as importantly, the Act establishes a dual licensing system – that is to say, in order to operate, a cannabis company needs a local permit (or other authorization) as well as a state license. In fact, local authorization is a prerequisite for a state license. And your local jurisdiction will have its own rules for cannabis that apply in addition to the state rules, up to and including a ban on cannabis activities.

Needless to say, operating in the Regulated Times is a lot more complicated and expensive than it was during the Before Times.

Especially when you consider the taxes. For example, in the City of Los Angeles, sale of adult-use cannabis is taxed at 10%, which means that any adult-use purchase in L.A. gets a 34.5% markup:

15% state cannabis excise tax, plus
10% Los Angeles Adult Use Cannabis Sales tax, plus
5% sales tax.

Note that the distributors must collect the excise tax from the retailer, so the 15% markup is not necessarily visible to the consumer. Similarly, consumers are generally unaware that there is a cultivation tax of $9.65 per ounce (or about $1.21 per eighth) of dried flower that the distributor has to collect from the cultivator.

Theoretically, all of this might be unproblematic if licensed retailers were only competing with each other. Which brings us to:

The Traditional Market

The traditional market is the illegal market, which is to say, the untaxed and unregulated market.

Legalization of adult-use cannabis was supposed to destroy the traditional market, but it hasn’t. As of early 2020, the traditional market was estimated to be 80% of the total cannabis market in California. This is not surprising, since the traditional market has the advantages of being untaxed and unregulated.

The traditional market has a pervasive negative effect on the legal market. For example, the traditional market tends to depress prices in the legal market and tends to attract talent away from the legal market. Some of these effects will be discussed in the following articles.

This article is an opinion only and is not intended to be legal advice.