Tag Archives: analysis

Documentation: Are You Prepared?

By Radojka Barycki
No Comments

Documents play a key role in the world of regulations and global standards. Documents tell a story on programs development, implementation and verification during an inspection or audit. Documents are used as evidence to determine conformance to the law or standard. However, do you know what kind of documents may be reviewed during a regulatory inspection or a food safety audit? Are you prepared to show that the implementation of regulatory requirements or a standard is done efficiently at your facility?

Inspectors and auditors will look for compliance either to regulations or to a standard criterion. Regulations and standards require that documentation is controlled, secured and stored in an area where they cannot deteriorate. Therefore, writing a Document Management Program (DMP) will help a business owner ensure consistency in meeting this and other requirements.Radojka Barycki will host a a plenary session titled, “Cannabis: A Compliance Revolution” at the 2018 Food Safety Consortium | Learn More

A well-developed and implemented DMP provides control over documents by providing a number sequence and revision status to the document. In addition, ownership for development, review and distribution of the documents are assigned to specific individuals within the company to ensure that there are no inconsistencies in the program. Documents must also have the name of the company in addition to a space to write the date when the record is generated. It is recommended to include the address if there are multiple operational sites within the same company.

There are different types of documents that serve as support to the operations:

  1. Program: A written document indicating how a business will execute its activities. When it comes to the food industry, this is a written document that indicates how quality, food safety and business activities are controlled.
  2. Procedures: General actions conducted in a certain order. Standard Operational Procedures (SOPs) allow the employee to know what to do in general. For example, a truck receiving procedure only tells the employee what the expected conditions are when receiving a truck (cleanliness, temperature, etc.) However, it doesn’t tell the employee how to look for the expected conditions at the time of the truck arrival.
  3. Work Instructions: Detailed actions conducted in a certain order. For example, truck inspection work instruction tells the employee what steps are to be followed to perform the inspection.
  4. Forms: Documents used to record activities being performed. 
  5. Work Aids: are documents that provide additional information that is important to perform the job and can be used as a quick reference when performing the required activities within the job. 
Are you prepared to face document requirements now and in the future?

The inspectors and auditors base their role on the following saying: “Say what you do. Do what you say. Prove it!” The programs say what the company do. The procedures, work instructions and work aids provide information on implementation (Do what you say) and the forms become records that are evidence (prove) that the company is following their own written processes.

Regulatory requirements for cannabis vary from state to state. In general, an inspector may ask a cannabis business to provide the following documentation during an inspection:

  1. Business License(s)
  2. Product Traceability Programs and Documents
  3. Product Testing (Certificate of Analysis – COAs)
  4. Certification Documents (applicable mainly to cannabis testing labs)
  5. Proof of Destruction (if product needs to be destroyed due to non-compliance)
  6. Training Documents (competency evidence)
  7. Security Programs

As different states legalize cannabis, new regulatory requirements are being developed and modeled after the pharma, agriculture and food industries. In addition, standards will be in place that will provide more consistency to industry practices at a global level. The pharma, agriculture and food industries base their operations and product safety in programs such as cGMPs, GAPs, HACCP-based Food Safety Management Systems and Quality Management Systems. Documents required during an inspection or audit are related to:

  1. Good Agricultural Practices (GAPs)
  2. Current Good Manufacturing Practices (cGMPs)
  3. Food Safety Plan Documents
  4. Ingredient and Processing Aids Receiving
  5. Ingredient and Processing Aids Storage
  6. Operational Programs (Product Processing)
  7. Final Product Storage
  8. Final Product Transportation
  9. Defense Program
  10. Traceability Program
  11. Training Program
  12. Document Management Program

In the always evolving cannabis industry, are you prepared to face document requirements now and in the future?

FSC logo

Food Safety Consortium To Address Cannabis Safety, Edibles Manufacturing

By Aaron G. Biros
1 Comment
FSC logo

The 6thAnnual Food Safety Consortium Conference & Expo will feature an entire track dedicated to cannabis. As announced in May of this year, the Cannabis Quality series will feature presentations by subject matter experts in the areas of regulations, edibles manufacturing, cannabis safety & quality as well as laboratory testing.FSC logo

The Food Safety Consortium is hosted by our sister publication, Food Safety Tech, and the Cannabis Quality series will be co-hosted by Cannabis Industry Journal. A number of cannabis-focused organizations will participate in the series of talks, which are designed to help attendees better understand the cannabis edibles market, regulations surrounding the industry and standards for manufacturers. Some highlights include the following:

  • Ben Gelt, board chairman at the Cannabis Certification Council (CCC), will moderate a panel where leaders in the edibles market discuss supply chain, production and other difficulties in manufacturing infused products. Panelists include Leslie Siu, Founder/CEO Mother & Clone, Jenna Rice, Director of Operations at Gron and Kristen Hill, MIP Director, Native Roots Dispensary, among others. “The Cannabis Certification Council believes consumer education campaigns like #Whatsinmyweed are critical to drive standards and transparency like we see in food,” says Gelt. “What better place to discuss the food safety challenges the cannabis industry faces than the Food Safety Consortium”
  • Radojka Barycki, CEO of Nova Compliance, will discuss the role of food safety in the cannabis industry and identify some biological and chemical hazards in cannabis product testing in her talk, “Cannabis: A Compliance Revolution.”
  • Larry Mishkin, counsel to Hoban Law Group and partner at the law firm, Silver & Mishkin, which serves cannabis businesses in Illinois, will provide insights during the conference.
  • Cameron Prince, vice president of regulatory affairs at The Acheson Group, will help attendees better understand key market indicators and current trends in edibles manufacturing during his talk on November 15. “With the current trend of legalizing cannabis edibles, medicinal and recreational suppliers alike are looking to quickly enter the edibles market,” says Prince. “Understanding the nuances of moving to food production relative to food safety, along with navigating the food industry’s regulatory environment will be critical to the success of these companies.”
  • Tim Lombardo and Marielle Weintraub, both from Covance Food Solutions, will identify common pathogens and areas where cross contamination can occur for edibles manufacturers.

The Food Safety Consortium will be held November 13–15 in Schaumburg, Illinois (just outside of Chicago). To see the full list of presenters and register for the conference, go the Food Safety Consortium’s website.

european union states

International Summer Cannabis Roundup

By Marguerite Arnold
No Comments
european union states

As August comes to a close, it is clear that it has been one busy quarter for market development – all over the place. Developments in the UK and Germany in particular, however, have been dramatic. In turn, this is also starting to bring other countries online – even as potential producers move in on the market and before real domestic medical reform has occurred (in countries ranging from Turkey to Spain).

And, say no more, Canada finally announced its “due date” in October.

How all three markets will move forward is also very interesting. They are all interrelated at this point, and even more intriguing, increasingly in synch.

This trend is also one advocates should take note of to push forward on further legislative and access issues going forward.

The EU looks poised to hop on the legalization train

In the future, no matter what happens with Brexit, developments in both the UK and Germany will continue to push the conversation forward in the EU, a region that is now the world’s most strategic (and globally accessible) cannabis market. Advocates, particularly in Canada and the U.S. right now, can also do much to support them.

Germany

Events here, while they may seem “slow” to outsiders, are in fact progressing – and as Cannabis Industry Journal has been reporting – quite fast even if the developments haven’t been (initially at least) quite as public. As this ‘zine wrote, breaking the news in July, the Federal German Drugs and Medical Devices Agency (BfArM) quietly posted the revised bid in July on a European tender site after refusing to confirm that it had sent out (undated) cancellation letters to previous hopefuls.  Applicants for the new tender have until October 22 to respond. It is expected, given the new focus on “coalitions” that there will be many more applicants from global teams.

Even more interesting is the informal “reference price” that BfArM is appearing to set for bid respondents (7 euros per gram) and the impact of that on all pricing going forward across the continent.

german flag
Photo: Ian McWilliams, Flickr

Within a week, it also emerged that the Deutsche Borse, the organization that regulates the German stock exchanges, and working via its third party clearing arm, refused to clear any trades of any publically listed North American cannabis company that are also listed in Germany. This is an interesting development for sure – particularly now. How it will impact the biggest companies (read publicly listed Canadian LPs) is unclear, particularly because they can now raise capital via global capital markets – including the U.S.

Earlier in the summer, one of the largest public or “statutory” health insurance companies in Germany issued the “Cannabis Report.” It showed that cannabis has now moved out of “orphan drug territory” in Germany, and over 15,000 patients are now prescribed the drug. That said, over 35% of all claims are still being rejected. Most patients at this point, are also women older than 40.

The UK

It seems to be less than coincidence that the other big mover this quarter (and in fact most of the year) has been the UK. These two countries are linked by history and trade more than any other in Europe.

Epidiolex-GWAs of October, the country will not only reschedule cannabinoid-derived medicine to a Schedule II drug, but also allow more patients to access it. It is unclear how fast reform will come to a country in the throes of Brexit drama, but it is clear that this discussion is now finally on the table. What is also intriguing about this development is how far and fast this will open the door for other firms to compete, finally, with the monopoly enjoyed by GW Pharmaceuticals in the British Islands since 1998.

In one of the quarter’s biggest coups that stockholders loved but left the domestic industry with few illusions about the fight ahead, GW Pharmaceuticals also announced that it had managed (ahead of all U.S.-based producers and firms and even rescheduling in the U.S.) to gain U.S. federal government approval to import a CBD-based epilepsy drug (Epidiolex) into the United States from the UK and thus gain national distribution.

Canada

While it was more inevitable (and planned for) than developments in Euro markets, Canada also moved forward this quarter. There is now a set date for a recreational market start.

What is even more interesting is that the next formal “steps” in all three markets are now timed to coincide within weeks of each other in October this year.

Canadian producers of course are in the leading position to enter both German and British markets. Further their production centers now springing up all over Europe are supplying both their source markets and will be available for international distribution.

Safety & Efficacy: Ensuring Dosing Accuracy for Infused Products

By Amy Davison
No Comments

Complications with dosing inaccuracies in the cannabis industry has always been a hot topic. In 2014, The Cannabist tested several Colorado infused products only to find that the results were different from what was indicated on the label. While the industry has come a long way at the state level since then, a study published in The Journal of the American Medical Association this past November found that 26 percent of CBD products sold online contained less CBD than the label. Similar to when you buy a bottle of wine or ibuprofen, people should be able to trust product labels.

Process validation in action at the Stratos facility
Process validation in action at the Stratos facility
(image credit: Lucy Beaugard)

There are processes that cannabis-infused product manufacturers can adopt to solve this issue. Incorporating process validation establishes reproducible customer experiences while in-process controls create product consistency and potency reliability. These operational and compliance techniques originated in the pharmaceutical industry and will undoubtedly become the future gold standard for best practices with cannabis manufacturers.

Product testing alone cannot assess quality for an entire lot or batch of product; therefore, each step of the manufacturing process must be controlled through Good Manufacturing Practices (GMP). Process validation is an aspect of GMPs used by the pharmaceutical industry to create consistency in a product’s quality, safety and efficacy. There are three main stages to process validation: process design, process qualification and continued process verification. Implementing these stages ensures that quality, including dosing accuracy, is maintained for each manufactured batch of product.

Validation: Step 1

Process design, the first phase of process validation, defines the manufacturing process based on previous product development and process research. The appropriate equipment, instruments and materials are selected as part of process design. Both standard operating procedures for equipment and operations as well as batch records for manufacturing steps are also finalized during this phase. The batch record must include critical process parameters (CPP), the parameters that must be maintained in order to produce product that consistently meets specified criteria. Mixing speed and time, temperature, pressure and flow rate are examples of common CPP. Training production personnel is also defined and performed as part of process design. Operators are trained on operating procedures and batch records in order to learn how to make the product successfully.

Process validation can help ensure accurate dosing.
Process validation can help ensure accurate dosing. (image credit: Lucy Beaugard)

Validation: Step 2

Process qualification, the next stage of process validation, is performed to evaluate the capability of a process for reproducible and robust manufacturing. Because reproducibility of a process cannot be fully assessed with a single batch, evaluation is typically performed on a minimum of three separate batches. For each batch included in the process qualification, the frequency and number of samples are increased over normal sampling to provide a more thorough assessment of each batch. The testing includes visual inspection for defects as well as quantitative tests such as weight or volume and potency. In addition to composite sampling, which is performed by combining samples from multiple time points throughout a batch (e.g. beginning, middle and end) to assess a batch as a whole, stratified sampling is performed. Stratified samples are taken from specified points throughout a batch, and rather than being combined, the samples are tested separately to indicate consistency throughout a given batch.

The Stratos product lineup- validation helped produce each of these consistently.

In addition to evaluating the reproducibility of a process, tests for robustness are performed during process qualification to demonstrate how changes in a process may impact the product. It is important to use different operators for performing manufacturing steps to ensure changes in personnel do not affect product quality. Switching out equipment and instruments will also reveal any sensitivities in a process. For example, when a different oven, mixer or tablet press is used, are the appearance, texture and potency impacted? If the product remains the same, that points toward the process being robust. Challenging the CPP will also provide important feedback regarding a process. If a step requires a temperature range of 50° – 70°C, it is recommended that the process be tested at the low end and high end of the range, to ensure the final product meets all required specifications. If the range assigned to a unit’s gross weight is 500 g ± 5%, then testing at 475 g and 525 g will offer more insight into how much variance the process truly can withstand.

Validation: Step 3

Once the process has been assessed for reproducibility and robustness, it transitions to continued process verification, which is the third and final stage of Process Validation. Performance of quality checks during each batch for the life of a product is part of this final stage. For infused products such as tablets, these checks include appearance – the tablets are the color and shape indicated by the batch record and they include the required imprint(s); weight – the tablets are within the specified weight range, which indicates correct tablet size and consistency of ingredients; hardness – tablets will dissolve/disintegrate for proper dosing; and friability – tablets will withstand stress of routine handling.

As your company grows in manufacturing volume, each of these three steps will become critical to safeguard against any inconsistencies. As we know in this industry, our most valuable asset is our license and success can be negatively impacted based on meeting compliance. Dedicating an internal role within quality and compliance will serve to future-proof your business against additional rules and regulations that are likely to come.

Two Recalls Hit California Cannabis Market

By Aaron G. Biros
No Comments

Just weeks ago, the first voluntary cannabis product recall occurred under California’s new regulations. According to an article on MJBizDaily.com by John Schroyer, the recall for their vaporizer cartridges affects almost 100 dispensaries in California.

Bloom Brands, the company issuing the voluntary recall, mentioned in a press release that batches sold between July 1-19, 2018 were contaminated with the pesticide Myclobutanil and therefore does not meet the Bureau of Cannabis Control (BCC) standards. Below is an excerpt from the press release:

We are working closely with the BCC to remedy this issue and expect clean, compliant products to be back on shelves in three weeks…. At Bloom, we are continuing to work with the BCC and other partners to ensure that the space is properly regulated and safe for all customers. Transparency and safety remain our top concerns and we will provide updates as additional information becomes available. We apologize for any concern or inconvenience this serious misstep has caused. We thank you for your continued trust and confidence in our products.

Then, just days later, Lowell Herb Co. issued a voluntary recall on their pre-rolls. First reported by MJBizDaily.com, it appears the products initially passed multiple lab tests and was cleared for retail sales. Weeks after the batch passed tests, a laboratory reversed its decision, saying the products failed to pass the state’s testing standards. The contaminant in question was not mentioned.

The CCIA post calling out the BCC
The CCIA post calling out the BCC

Many seem to think these recalls are a product of the BCC’s unrealistic expectations in their lab testing rules. In a Facebook post days ago, the California Cannabis Industry Association called out the BCC for their unworkable rules. “The BCC has set testing standards that are nearly impossible to meet,” reads the post. “As a result recalls like this will be the norm and the industry will suffer a bottleneck in supply. Testing standards need to be realistic, not impossible.”

On July 13, California issued the first draft of their proposed permanent regulations, which would update and change the current emergency regulations. The proposed action levels for a batch to pass a pesticide test can be found on pages 105 and 106. The state’s regulatory bodies are holding public meetings on the proposed rules throughout August and stakeholders can also submit comments via email.

Dr. Ed Askew
From The Lab

Quality Plans for Lab Services: Managing Risks as a Grower, Processor or Dispensary, Part 4

By Dr. Edward F. Askew
No Comments
Dr. Ed Askew

In the last three articles, I discussed the laboratory’s responses or defenses used to reply to your questions about laboratory results that place stress on the success of your business. The Quality Control (QC) results can cause this stress if they are not run correctly to answer the following questions:

  1. Are the laboratory results really true?
  2. Can the laboratory accurately analyze sample products like my sample?
  3. Can the laboratory reproduce the sample results for my type of sample?

Now let’s discuss the most important QC test that will protect your crop and business. That QC sample is the Matrix Sample. In the last article in this series, you were introduced to many QC samples. The Matrix Sample and Duplicate were some of them. Take a look back at Part 3 to familiarize yourself with the definitions.

The key factors of these QC sample types are:

  1. Your sample is used to determine if the analysis used by the laboratory can extract the analyte that is being reported back to you. This is performed by the following steps:
    1. Your sample is analyzed by the laboratory as received.
    2. Then a sub-sample of your sample is spiked with a known concentration of the analyte you are looking for (e.g. pesticides, bacteria, organic chemicals, etc.).
    3. The difference between the sample with and without a spike indicates whether the laboratory can even find the analyte of concern and whether the percent recovery is acceptable.
    4. Examples of failures are from my experiences:
      1. Laboratory 1 spiked a known amount of a pesticide into a wastewater matrix. (e.g. Silver into final treatment process water). The laboratory failed to recover any of the spiked silver. Therefore the laboratory results for these types of sample were not reporting any silver, but silver may be present. This is where laboratory results would be false negatives and the laboratory method may not work on the matrix (your sample) correctly. .
      2. Laboratory 2 ran an analysis for a toxic compound (e.g. Cyanide in final waste treatment discharge). A known amount of cyanide was spiked into a matrix sample and 4 times the actual concentration of that cyanide spike was recovered. This is where laboratory results would be called false positives and the laboratory method may not work on the matrix (your sample) correctly.
  2. Can the laboratory reproduce the results they reported to you?
    1. The laboratory needs to repeat the matrix spike analysis to provide duplicate results. Then a comparison of the results from the first matrix spike with its duplicate results will show if the laboratory can duplicate their test on your sample.
      1. If the original matrix spike result and the duplicate show good agreement (e.g. 20% relative percent difference or lower). Then you can be relatively sure that the result you obtained from the laboratory is true.
      2. But, if the original matrix spike result and the duplicate do not show good agreement (e.g. greater than 20% relative percent difference). Then you can be sure that the result you obtained from the laboratory is not true and you should question the laboratory’s competence.

Now, the question is why a laboratory would not perform these matrix spike and duplicate QC samples? Well, the following may apply:

  1. These matrix samples take too much time.
  2. These matrix samples add a cost that the laboratory cannot recover.
  3. These matrix samples are too difficult for the laboratory staff to perform.
  4. Most importantly: Matrix samples show the laboratory cannot perform the analyses correctly on the matrix.

So, what types of cannabis matrices are out there? Some examples include bud, leaf, oils, extracts and edibles. Those are some of the matrices and each one has their own testing requirements. So, what should you require from your laboratory?

  1. The laboratory must use your sample for both a matrix spike and a duplicate QC sample.
  2. The percent recovery of both the matrix spike and the duplicate will be between 80% and 120%. If either of the QC samples fail, then you should be notified immediately and the samples reanalyzed.
  3. If the relative percent difference between the matrix spike and the duplicate will be 20% or less. If the QC samples fail, then you should be notified immediately and the samples should be reanalyzed.

The impact of questionable laboratory results on your business with failing or absent matrix spike and the duplicate QC samples can be prevented. It is paramount that you hold the laboratory responsible to produce results that are representative of your sample matrix and that are true.

The next article will focus on how your business will develop a quality plan for your laboratory service provider with a specific focus on the California Code Of Regulations, Title 16, Division 42. Bureau Of Cannabis Control requirements.

CannaVation logo

Jefferson University Cannabis Innovation Competition Accepting Submissions

By Aaron G. Biros
No Comments
CannaVation logo

Thomas Jefferson University’s Lambert Center for the Study of Medicinal Cannabis and Hemp announced recently that it is co-sponsoring the third annual JAZ Tank Challenge: CannaVATION Edition.

Jefferson Innovation’s 2018 JAZ Tank Challenge: CannaVATION Edition is currently accepting submissions of innovative business models for a chance to compete on October 3, where finalists will each present their business ideas in a 10-minute pitch. Winning submissions could get one free provisional or utility patent application and business and clinical consulting services. The competition will be accepting submissions through August 20, 2018.

Finalists will compete for a $10,000 grand prize, legal support and business consultation services.  According to the announcement, in addition to the grand prize winner, up to two other teams could win $5,000 in financial support, one free provisional or utility patent application and consulting services as well.

to Zoe McKinley, director of entrepreneurship and social impact initiative at the Lambert Center
Zoe McKinley, director of entrepreneurship and social impact initiative at the Lambert Center

According to Zoe McKinley, director of entrepreneurship and social impact initiative at the Lambert Center, the competition is designed to have a national focus, not just on the Pennsylvania cannabis industry. “We are excited to shine a spotlight on Pennsylvania, and Thomas Jefferson University specifically, as a hub for research in medical cannabis, but like the competition, the Lambert Center has a national and even international focus,” says McKinley. She says this is also the first year that the JAZ tank is exclusively focused on cannabis.

Jefferson’s Chief Innovation Officer, Dr. Rose Ritts, notes “the competition is about creating a platform for emerging concepts to get a toe-hold on the path to potential commercialization. Anything that will improve patient access or outcomes …or improve the industrial hemp market in the U.S. is definitely of interest,” says Ritts. “We welcome companies to jump into the Challenge, and we also welcome investors or anyone thinking about getting into this space to be in the audience for our event on October 3.”

Dr. Rose Ritts, Jefferson’s Chief Innovation Officer
Dr. Rose Ritts, Jefferson’s Chief Innovation Officer

The challenge is an annual healthcare startup competition, where new businesses with particularly innovative ideas and technology solutions for the legal cannabis space submit their business models to a panel of judges for review. “This event will bring together the most inventive minds to pitch their solutions to stakeholder problems in the still-emerging medical and medicinal cannabis and industrial hemp industries,” reads the announcement. The Lambert Center is seeking applicants in a wide variety of business areas, including patient access, product design, plant science, information management, horticultural technology, sustainability, transportation, security, workforce training, community outreach, banking and public education.

Lambert Center Director Charles Pollack, MD sees the massive growth potential of the legal cannabis industry. “At our Center we are dedicated to identifying new approaches to developing cannabinoid-based therapies that help patients with various debilitating symptoms and diseases,” says Pollack. “Our JAZ Tank Challenge may identify the next great idea in medicinal cannabis.”

CannaVation logoThrough the Lambert Center for the Study of Medicinal Cannabis and Hemp, Jefferson is the first major university in the US to provide a comprehensive academic resource for the medicinal, medical and industrial applications and business of cannabis and hemp. The Lambert Center, the first of its kind in academia, provides “expert-developed, unbiased information to clinicians and patients about medical cannabis and cannabinoid-based therapies,” according to their website. They want to “support the development of entrepreneurial and socially responsible business and clinical approaches within the emerging medical cannabis industry and explore and develop new ways to use hemp in medical, industrial, and consumer products,” reads the website.

McKinley mentions they are looking for creative approaches to solving problems in the medical cannabis and industrial hemp industry. “These could be anything from new products or supply chain innovations to patient support tools to energy management systems that lower the environmental impact of grow facilities,” says McKinley. “We are hoping to see companies that have already launched, or are ready to very quickly.” The third annual JAZ Tank Challenge: CannaVATION Edition is accepting submissions through August 20. Click here for more information.

UKflag

British Government Agrees To Loosen Rules on Prescribing Medical Cannabis

By Marguerite Arnold
No Comments
UKflag

After a year of embarrassing missteps and revelations, along with two well-run advocacy campaigns by the parents of children with drug-resistant epilepsy, the British government is finally throwing in the towel on medical cannabis.

Sadly, politics rather than science has driven the pace of British cannabis legalizationIn the last week of July, a mere two weeks after announcing his review of the issue against mounting domestic pressure and outrage in the media, Sajid Javid, the home secretary, announced that cannabis medications will be rescheduled by the fall, allowing doctors to prescribe them more widely.

“Fall,” it should be noted, is not only when the Canadian government moves ahead with its own fully recreational market, but also when the German bid respondents need to file their paperwork to participate in the country’s first grow bid, Round II.

A Political Embarrassment Beyond Brexit

Sadly, politics rather than science has driven the pace of British cannabis legalization, just like it has in other places. However the UK is one of the best examples of how far medical knowledge has outstripped the pace of political change, and in this case, exposed bare the banal reason.

News broke this summer, as two families mounted a highly successful battle in the public for medical access, that the Prime Minister herself has personally profited from a status quo that is only now slowly going to change.

How and why?

Theresa May, Prime Minister of the UK
Theresa May, Prime Minister of the UK
Image: Annika Haas, Flickr

It was bad enough in May that the publicly anti-pot reformer Victoria Atkins, the cabinet level British drugs minister, was married to the managing director of British Sugar, the company with the exclusive right to grow cannabis in the British Isles. British Sugar is also the sole cultivator for GW Pharmaceuticals, the only company with the license to produce cannabis medications in the UK (and export them globally). In June, however, it emerged that Prime Minister Theresa May’s husband, Phillip May, is employed by Capital Group– an investment firm that is also the largest shareholder in GW Pharma. This is against the backdrop of news that broke earlier this year that GW Pharma had made the UK the single largest exporter of cannabis-based medicine annually. Globally. Even more than all of the Canadian firms combined currently exporting to Europe and beyond. Even as the drug is largely denied to British residents.

You don’t even have to be British to think the entire situation is more than a bit of a sticky wicket.

Vested, If Not Blueblood Interests

This development also came to light right as GW Pharma’s newest focal epilepsy drug faltered to failure in Eastern European trials and as Epidiolex, the company’s drug for certain kinds of childhood epilepsy, was given the green light in the U.S. by the government as the “first” cannabis-based medication to be allowed for sale in America.Epidiolex-GW

No one has yet defined exactly what kind of cannabinoids will be allowed to be prescribed in the UK come fall, but here is the most interesting development of all that still hangs over the British Isles like stale smoke: Will competitors to GW Pharma be allowed to sell their products to medical customers in the UK or will this new opening for patients just create more of a monopolized windfall for one company whose profits, at least, lie in “pharmatizing” the drug rather than creating greater access to the raw plant or its close derivatives? And those profits flow to women (and men) with the greatest political control over the development of the industry in the country.

Is This Really A “Legalization” Victory?

In the short term, no matter how limited, the answer is actually yes. Rescheduling the drug is a step that has not even been taken in the U.S., and will serve, medically, to reset the needle if not the debate about the circumstances under which cannabis should be used for patients.GW logo

It will also move the punishment discussion in a way that still has not happened in places like Germany where, technically, the drug has not yet been decriminalized even though doctors are prescribing it and public health insurers cover the costs for increasing numbers of patients. Large numbers of Britons, just like everywhere else, are incarcerated every year or obtain black marks on their records for mere possession that in turn can affect lives.

Finally, it will put recreational reform in the room, even if still knocking at the door. This discussion too has been gaining in popularity over the past year in particular as reform moves elsewhere. Like Germans, like Canadians and like Americans, reform in Colorado and Washington set loose a global revolution, which will clearly not be stopped.

Even if in places like the UK, it is still moving far slower than it should be. For political and business reasons, not driven by science.

EVIO Logo

EVIO Labs Massachusetts Accredited to ISO 17025

By Aaron G. Biros
No Comments
EVIO Logo

EVIO Inc.’s Massachusetts lab announced yesterday they received ISO/IEC 17025 accreditation from the American Association for Laboratory Accreditation (A2LA). According to the Massachusetts Cannabis Control Commission, the body in charge of regulating the state’s cannabis industry, accreditation to ISO/IEC 17025: 2017 is a requirement for cannabis testing labs.

The press release says this makes EVIO Labs Massachusetts one of only a few operating and accredited testing laboratories serving the state’s medical cannabis industry. With recreational sales coming shortly to the state, EVIO is preparing for a higher demand in their lab testing services. “We are very proud of all of the teams’ hard work that resulted in this advanced accreditation,” says James Kocis, lab director of EVIO Labs Massachusetts. “With the state-mandated laboratory regulations, EVIO upholds the high standards of testing and plays a pivotal role in ensuring consumer safety and confidence in the states burgeoning marijuana market.”

According to Adam Gouker, general manager at A2LA, EVIO Labs Massachusetts, based in Southborough, MA, is the first cannabis laboratory they accredited in the state. “A2LA is excited to expand our cannabis accreditation program into yet another state, promoting the value of independent third-party accreditation to support quality products in the industry,” says Gouker. “Having the opportunity to work with a prominent name in the industry such as EVIO Labs and assess their exceptional Massachusetts laboratory has been an additional bonus.”

EVIO LogoAccording to the A2LA press release, by achieving ISO/IEC 17025 accreditation, EVIO Labs Massachusetts demonstrates that they “have management, quality and technical systems in place to ensure accurate and reliable analyses, as well as proper administrative processes to ensure that all aspects related to the sample, the analysis, and the reporting are standardized, measured, and monitored.” It also requires that personnel are competent to perform each analysis.

EVIO Inc. operates in the cannabis testing market with lab services in a number of states, including Oregon, California and Florida among others. Their Florida location was the first accredited cannabis lab in the state and they recently earned the same accreditation for their Berkeley, California location.