Tag Archives: CA

Digipath Expands To California

By Aaron G. Biros
1 Comment

In July, we sat down with the folks at Digipath, Inc. when they received their testing license in Nevada for the adult use market. In that conversation, they mentioned they were looking to expand into California.

According to a press release published September 25th, DigiPath, Inc. has entered a joint venture to establish their first cannabis-testing lab in California. They will be working with Don Ashley, an experienced real estate developer and cannabis entrepreneur, to launch Humboldt Botanical, LLC, conducting business under the name “Digipath Botanical Testing”.

Ashley says they expect to be fully operational by Q1 of 2018. “We expect to break ground on this project in the next few weeks and hope to be operational in early Q1 2018 just after the state-wide adult-use market is expected to launch, as we have already obtained approval from the local planning authorities for the entire complex,” says Ashley.

Todd Denkin, founder and president of Digipath

Todd Denkin, president of Digipath, is optimistic for California’s market and the coming regulations. “The state of California is estimated to be the single largest cannabis market in the U.S. Adult-use cannabis legislation was approved by California residents last November, and we expect these new regulations to be implemented in 2018,” says Denkin. “The good news for the industry is that the requirements for cannabis testing will be significant, and we are excited to partner with Don and his team to pursue this opportunity in Humboldt County.”

Ashley is contributing roughly $2 million to build and equip the lab with instrumentation, while Digipath Labs will manage and supervise operations at the lab. According to the press release, Digipath will provide a non-exclusive license to use its intellectual property for the operation of the lab. Digipath Labs will retain rights over all the scientific data generated in the lab.

Cindy Orser, PhD., chief science officer at Digipath

According to Cindy Orser, PhD., chief science officer at Digipath, that data will be put to good use. “Digipath Labs has developed an algorithm for use in strain authentication based largely on terpene profiling from our testing lab in Nevada and we are eager to further test our hypothesis with an expanded dataset from cannabis grown in Northern California,” says Orser.

While testing labs are primarily seen as safeguards for public health and safety, using data to correctly identify strains is a relatively new concept. “Digipath Labs is all about public health and safety through testing for adulterants,” says Orser. “Another component to quality is having confidence in product authenticity at the dispensary level. Not only is the consumer buying quality assured products but truth in advertising when it comes to strain nomenclature.”

Denkin says they were proactive in working toward getting the license early on. “Our partners have been dealing with the local regulators while we have been providing the proper SOP’s for the local government in order to receive the proper licensure in the area,” says Denkin. Taking their experience from Nevada to California, Orser says they have been asked to present to the California Toxicology Association on their experience with cannabis testing in the highly regulated marketplace of Nevada.

The laboratory in Humboldt is going to be part of a “cannabis industrial park,” alongside an R&D facility, oils/concentrate manufacturing center, health and wellness center, distribution and processing facility, tissue culture nursery, hemp clothing outlet, and coffee bistro, according to the press release.

Looking forward to growing their business, Denkin says they hope to launch a lab in Southern California. “We do expect to have a larger footprint in California because of the size of the market and are looking for locations in Southern California as well,” says Denkin. When asked about any new plans to expand elsewhere, Denkin says they’ll let us know. “We are continuing with our business plan and actively seeking the right mergers and acquisitions. Stay tuned.”

California Releases Draft Lab Testing Regulations

By Aaron G. Biros
2 Comments

Last Friday, the Bureau of Marijuana Control, the regulatory body overseeing California’s cannabis industry, released a set of proposed regulations for the lab testing market. The regulations are somewhat comprehensive, covering sampling, licensing, pesticide testing, microbiological contaminants, residual solvents, water activity and much more.

Formerly named the Bureau of Medical Cannabis Regulation under the state’s Department of Consumer Affairs, the Bureau of Marijuana Control is tasked with overseeing the development, implementation and enforcement of the regulations for the state’s cannabis industry. In their statement of reasons for the lab testing regulations, the bureau says they are designed with public health and safety at top of mind. At first glance, much of these laboratory rules seem loosely modeled off of Colorado and Oregon’s already implemented testing regulations.

The regulations lay out requirements for testing cannabis products prior to bringing them to market. That includes testing for residual solvents and processing chemicals, microbiological contaminants, mycotoxins, foreign materials, heavy metals, pesticides, homogeneity as well as potency in quantifying cannabinoids.

The microbiological impurities section lays out some testing requirements designed to prevent food-borne illness. Labs are required to test for E. coli, Salmonella and multiple species of the pathogenic Aspergillus. If a lab detects any of those contaminants, that batch of cannabis or cannabis products would then fail the test and could not be sold to consumers. A lab must report all of that information on a certificate of analysis, according to the text of the regulations.

The proposed regulations stipulate requirements for sampling, including requiring labs to develop sampling plans with standard operating procedures (SOPs) and requiring a lab-approved sampler to follow chain-of-custody protocols. The rules also propose requiring SOPs for analytical methodology. That includes some method development parameters like the list of analytes and applicable matrices. It also says all testing methods need to be validated and labs need to incorporate guidelines from the FDA’s Bacterial Analytical Manual, the U.S. Pharmacopeia and AOAC’s Official Methods of Analysis for Contaminant Testing, or other scientifically valid testing methodology.

Labs will be required to be ISO 17025-accredited in order to perform routine cannabis testing. Laboratories also need to participate in proficiency testing (PT) program “provided by an ISO 17043 accredited proficiency-test provider.” If a laboratory fails to participate in the PT program or fails to pass to receive a passing grade, that lab may be subject to disciplinary action against the lab’s license. Labs need to have corrective action plans in place if they fail to get a passing grade for any portion of the PT program.

California Releases Draft Medical Cannabis Regulations

By Aaron G. Biros
No Comments

Last week, Governor Brown’s Administration released a set of proposed rules for the medical cannabis, attempting to provide some oversight to the once unregulated market. In 2015, the governor signed three bills into law that established a regulatory framework via the Medical Cannabis Regulation and Safety Act. That legislation set up the Bureau of Medical Cannabis Regulation inside the Department of Consumer Affairs as the overseeing regulatory agency.

According to the press release, the proposed regulations for manufacturing and cultivation have also been published. “The proposed licensing regulations for medical cannabis are the result of countless hours of research, stakeholder outreach, informational sessions and pre-regulatory meetings all across the state,” says Lori Ajax, chief of the Bureau of Medical Cannabis Regulation. “And while we have done quite a bit of work and heard from thousands of people, there is still so much more to do. In order to make our program successful we still need your feedback.”

According to their website, the legislation divides responsibility for licensing businesses between three regulatory bodies: The CA Department of Food and Agriculture the CA Department of Public Health and the Bureau of Medical Cannabis Regulation, which will be the leading body in charge of licensing. The proposed regulations are not set in stone, but give us an important glimpse into how the state hopes to regulate the market.

Among the proposed rules are a number of regulatory compliance nuances expected to raise prices, but provide extra measures to protect consumer safety. According to the SF Gate, regulators expect prices could climb $524 per pound. But with that price jump comes a lot of regulations that other states have so far successfully implemented. The laboratory testing and traceability stipulations are presumably designed to safeguard public health, preventing things like black market diversion and off-label pesticide use.

The proposed ‘cannabis product symbol’

In addition to the medical regulations, the proposed manufacturing regulations set some notable requirements. Those rules are set by the Office of Manufactured Cannabis Safety, established in the Center for Environmental Health of the California Department of Public Health (CDPH) after the 2015 legislation was signed into law. Good Manufacturing Practices, food product standards, operational and labeling requirements are included in the provisions, along with a list of licensing tiers, application requirements and fees. They have a handy summary of the proposed regulations for those looking for the key highlights.

Omar Figueroa, an attorney with a cannabis law practice in California, says his clients in the industry are preparing to suggest changes to the proposed regulations and possibly legal challenges. “They are looking at this as overregulation by people that are not in the cannabis industry,” says Figueroa. “These are outsiders with a limited knowledge base creating somewhat uninformed regulations.” He says a good example of this is the potency limit on infused products. “They make perfect sense for [the recreational market] but for the medical market it is simply unacceptable. Patients develop a tolerance to THC and would have to increase their caloric intake and buy more infused products if this proposed regulation becomes final.” He says there are a number of regulations that seem kind of arbitrary. “Like prohibiting cannabis-infused caffeine products; there doesn’t seem to be a necessity in the rulemaking for this,” says Figueroa. “A lot of these regulations are going to be susceptible to challenges because California requires regulations to be necessary and alternatives to be considered.”

Although the lab testing regulations won’t be published for another few days, Figueroa expects them to be a huge disruptor for the market. “Most labs in the state are not ISO 17025-accredited, which means many labs might not be able to issue certificates of analysis when the regulations get enforced,” says Figueroa. He says it is safe to say California regulators are looking at other jurisdictions, like Colorado and Oregon for example, in crafting these rules, but we can expect a sea change in these regulations before they get enforced.

Manufacturers will be required to use a cannabis product symbol with a ‘THC!’ marking on their labels. There is also a 100-milligrams-per-package limit for THC in infused products, which is similar to rules we saw Colorado and Oregon roll out during a preliminary period of legal recreational cannabis.

For those looking to get involved in the regulatory process, there is a 45-day comment period on the proposed rules.