Rachel Carson’s book Silent Spring in 1962, is often credited with helping launch the environmental movement. Ten years later, VP Edmund Muskie elevated the environment to a major issue in his 1972 Presidential campaign against Richard Nixon. 57 years after Ms. Carson’s book, we’re still having the same problems. Over 13,000 lawsuits have been filed against Monsanto and last month a jury in Alameda County ruled that a couple came down with non-Hodgkin’s lymphoma because of their use of Roundup. The jury awarded them one billion dollars each in punitive damages. Is there a safer alternative?
“Effectively replacing the need for pesticides, we use Integrated Pest Management (IPM) which is a proactive program designed to control the population of undesirable pests with the use of natural predators, a system commonly known as “good bugs (such as ladybugs) fighting bad bugs”, states the website of Mucci Farms, a greenhouse grower. While this applies to cannabis as well, there is one major problem with the crop that isn’t faced by other crops.
Rachel Carson’s Silent Spring- often credited with starting the environmental movement of the 20th century.
While states are moving rapidly to legalize it, the EPA is currently not regulating cannabis. That is in the hands of each state. According to a story in the Denver Post in 2016, “Although pesticides are widely used on crops, their use on cannabis remains problematic and controversial as no safety standards exist.” Keep in mind that it takes a lot more pesticides to keep unwarranted guests off your cannabis plant when it’s outdoors than when it’s in a controlled environment.
We’re accustomed to using endless products under the assumption that a range of governmental acronyms such as NIH, FDA, OSHA, EPA, USDA are protecting us. We don’t even think about looking for their labels because we naturally assume that a product we’re about to ingest has been thoroughly tested, approved and vetted by one of those agencies. But what if it’s not?
Again, cannabis regulation is at the state level and here’s why that’s critical. The budget of the EPA is $6.14 billion while Colorado’s EPA-equivalent agency has a budget of $616 million. According to the federal budget summary, “A major component of our FY 2019 budget request is funding for drinking water and clean water infrastructure as well as for Brownfields and Superfund projects.” In short, federal dollars aren’t going towards pesticide testing and they’re certainly got going towards a product that’s illegal at the federal level. That should make you wonder how effective oversight is at the state level.
What impact does this have on our health and what impact do pesticides have on the environment? A former Dean of Science and Medical School at a major university told me, “Many pesticides are neurotoxins that affect your nervous system and liver. These are drugs. The good news is that they kill insects faster than they kill people.” Quite a sobering thought.
“We have the ability to control what kinds of pesticides we put in our water and how much pesticides we put in our water.”Assuming that he’d be totally supportive of greenhouses, I pushed to see if he agreed. “There’s always a downside with nature. An enclosure helps you monitor access. If you’re growing only one variety, your greenhouse is actually more susceptible to pests because it’s only one variety.” The problem for most growers is that absent some kind of a computer vision system in your greenhouse, usually by the time you realize that you have a problem it’s already taken a toll on your crop.
Following up on the concept of monitoring, I reached out to Dr. Jacques White, the executive director of Long Live the Kings, an organization dedicated to restoring wild salmon in the Pacific Northwest. Obviously, you can’t monitor access to a river, but you certainly can see the effects of fertilizer runoff, chemicals and pesticides into the areas where fish live and eventually, return to spawn.
“Because salmon travel such extraordinary long distances through rivers, streams, estuaries and into oceans they are one of the best health indicators for people. If salmon aren’t doing well, then we should think about whether people should be drinking or using that same water. The salmon population in the area around Puget Sound is not doing well.”
We talked a bit more about pesticides in general and Dr. White summed up the essence of the entire indoor-outdoor farming and pesticides debate succinctly.
“We have the ability to control what kinds of pesticides we put in our water and how much pesticides we put in our water.”
If you extrapolate that thought, the same applies to agriculture. Greenhouse farming, while subject to some problems not endemic to outdoor farming, quite simply puts a lot fewer chemicals in the air we breathe, the water we drink and the food we eat.
Did you know that the use of personal vehicles for transporting cannabis products is one of the most frequent claims in the cannabis industry? It surpasses property, product liability and even theft. Businesses are either unaware of the risks involved in using personal vehicles for transporting cannabis, or they aren’t taking them seriously enough.
Considering the strict statutes many states have placed on transporting cannabis should be reason alone to be more diligent. For example, the California Bureau of Cannabis Control’s proposed regulations require cannabis business owners to ensure their drivers have designated permits to transport the product. The state’s current legislation mandates inspections at any licensed premises, and requires employers to provide detailed tracking and schedules on the transport of product. Further, the state prohibits using minors to transport cannabis, and considers it a felony to do so.
Regulatory concerns, combined with the potential liabilities that could come from driver behavior, are keeping insurers from offering auto coverage to the cannabis industry. In fact, just four insurers currently offer the industry auto coverage, with premiums running as high as $17,000 per auto on average. It is important to note that personal auto insurance falls short because it doesn’t cover cargo loss.
Alternatively, because the stakes are so high, many companies are using courier services to transport cannabis product. But cargo insurance is still an issue. Without it, the care, custody and control of someone else’s products, and insurance limits are lacking. Even when the courier has cargo coverage, because they are delivering for multiple companies, the claims payout would have to be split amongst all the customers – likely below the value of your loss.
Consider the following best practices when transporting cannabis:
Conduct background checks/review DMV records. Uncovering any potential driver issues prior to hiring is critical. Look for previous DUIs or drug related history. Employees who might use product before getting behind the wheel are a significant danger to other drivers and a major liability to the employer. Even after hiring, be on alert for signs that indicate poor driving performance. Use check-in/check-out processes for all drivers, and conduct regular vehicle walk-arounds to look for scratches, dents or other damage that otherwise might be unreported to the employer.First, and most importantly, assess your risk mitigation options. Then, put processes in place as soon as possible to eliminate risk.
Implement quarterly driver training. Educate employees on proper procedures. While minor fender benders and sideswipe accidents are most common, even these can be costly if not handled properly. Once law enforcement get involved in an accident the car’s transportation of cannabis could become a secondary issue. Teach drivers how to handle accidents while on the scene, including informing law enforcement about the cargo and the employer.
Use unmarked vehicles. Drivers carrying a significant amount of product and/or cash are tempting targets for thieves. Company cars used for transporting product should be newer, and have no fleet serial numbers or anything identifying the company.
Require increased personal liability limits. If an employee is using their own personal vehicle for business purposes, the business owner should require that person carry more than minimum limits of personal liability. Ideally, they should have $300,000 or more, at an absolute minimum $100,000.
Get started now
First, and most importantly, assess your risk mitigation options. Then, put processes in place as soon as possible to eliminate risk. Secure the right insurance coverage, and ask your broker/underwriter to provide any additional recommendations to best mitigate your transportation, delivery, and cargo exposures.
The British have finally decided that cannabis reform is overdue. In London at least, 63% of the population believe that recreational reform is a good idea. According to a poll by The Evening Standard, the rest of England too, is getting close to a majority when the idea of recreational reform is in the room.
It is, as usual, recreational reform that is the icing on a medical cake that has yet to be baked. But that spice brownie is well on its way to the oven too. According to the British Medical Journal as of the beginning of July, the idea of broader access to regulated medical supplies for patients is mandatory.
And in the ranks of the conservative party, Crispin Blunt founded the Conservative Drug Policy Reform Group last September to lead Parliament in a long overdue discussion about the use of both medicinal and recreational cannabis use in the UK that formally “launched” during the last week of June.
But how the industry will develop here is also a big question in the room right now, especially with a country poised on the edge of one of the biggest constitutional questions in the country’s history – to Brexit or not, and how.
Justice Minister Crispin Blunt (right) Photo courtesy of The UK Ministry of Justice, Flickr
The North American Influence Is Controversial
While Blunt, for example, sees no issue with injecting North American capital into the debate, there are others who are not so sanguine. And while the idea of Canadian reform is popular here, including the freedom of patients (and others) to grow small amounts themselves, the idea of Canadian companies influencing national policy is not. From The Daily Mail to The Guardian, there have been front page headlines about the coming financial influence of “The North Americans.”
That this discussion is also going on at a time when the UK is considering a completely new trade agreement with the world, including on pharmaceuticals, is not insignificant. Where the country’s drugs come from, far from cannabis, is absolutely on the table. Not to mention how much they cost.
Questions of basic access are likely, in other words, to be in the room for a long time here. The barriers to obtaining and filling a prescription start at its expense – which is ₤1,100 (about $1,400) per prescription. There are few people, let alone those who are chronically ill, who can afford the same. This is far from a “normalized” drug- even of last resort- at the NHS.So far, the number of actual cannabis patients in the UK (ones who go to a doctor for a prescription and fill it) is still under 100 people.
That said, it is a start. And for the first time, as of this summer, those with the money can in fact, obtain cannabis by prescription.
But what happens to those (the vast majority) who cannot?
Patients Are Feeling Side-lined
Just as in national legalizing conversations in the United States and Canada so far, patients are being pushed aside for “the business” to take the conversation forward. But where does this business fall on matters of price and access?
So far, the number of actual cannabis patients in the UK (ones who go to a doctor for a prescription and fill it) is still under 100 people.
While patient groups are organizing, and the earliest ones to gain national attention, usually families whose children have been directly in the line of fire, are getting commercial ambitions themselves, the fact remains that patient voices are not the loudest ones in the room. Although as Blunt announced last week, he does not see recreational reform happening in the UK for the next five years.
That also means that every Canadian company entering the market (in particular) will have to continue to sing the same medical song they have been humming across Europe- at least in public.
The UK is NOT Germany – But It’s Not Canada Or The US Either…
No matter how much more “liberal” supposedly, the English people are on the whole CBD question (there is already far more CBD for sale in the UK than just about anywhere else), the UK market is still far behind Germany. Why? Since March 2017, insurance companies auf Deutschland have been required to cover the drug – from sprays and pills to floss when prescribed by a doctor.
There are, by latest calculations about 50,000 German patients.
That said, it is clear that the British do not seem to give a fig about the entire “novel food” discussion and are literally, in some cases, daring the police to raid stores and shut down establishments. The idea of rebellion against EU rules seems very obvious on the CBD front.
Beyond this, however, it is also clear that “Canadian” much less “American” cannabis reform is not necessarily the only model in town.
As the British, in other words, do finally embrace the cannabis question, it is very likely that the face of the same will be of a unique Limey strain all of its own.
In the burgeoning cannabis market, grow facilities are facing more and more competition every day. New indoor cultivation enterprises are often being set up in formerly vacant industrial buildings and commercial spaces, while in other cases, companies are planning and constructing new grow facilities from the ground up. For all these establishments, continually lowering production costs while supplying the highest possible quality in ever-increasing yields is the way forward.
Whether in existing or new structures, concrete floors are ubiquitous throughout the majority of cannabis growing facilities. With the right treatment, these indoor concrete traffic surfaces can greatly contribute to a company achieving its operational objectives. Alternatively, insufficiently protected concrete floors can create annoying and costly barriers to accomplishing company goals.
Challenges in Cannabis Grow Facility Construction
As with any emergent industry, mainstream acceptance and market growth is bringing regulation to cannabis cultivation. Local governments are paying more attention to how cannabis growing facilities are constructed and operated. In addition to the standard business matters of building safety, employee working conditions and tax contributions, elected officials are increasingly under pressure from constituents to analyze the overall effect of grow facilities on their communities at large.
High consumption of energy for grow room lights and high water usage are just part of the equation. The temperature and humidity needs of a grow facility can be similar to that of an indoor swimming pool environment. While warmth and moisture are ideal for cannabis growth, they also provide the ideal conditions for the growth and proliferation of fungi and other undesirable microorganisms. Therefore, to help preserve plant health in the moist indoor climate, fumigation often comes into play.
Carbon dioxide (CO2) enrichment of grow room air, a common practice proven to increase crop yields, presents another set of safety and health considerations in dense urban environments.
Adding to these challenges, many cannabis grow facilities are producing plants destined for either pharmacological or nutritional use. This in itself demands scrutiny by regulators for the sake of the consuming public.
As a result, grow room managers and owners must stay informed about the evolution of the industry in terms of local and federal agency regulations concerning their facilities, their overall operation and their products.
Bare Concrete Floors in Grow Rooms
As a foundational construction material, concrete continues to lead the way in commercial and industrial construction. Despite the many advantages of concrete floors, when left unprotected they can present significant challenges specific to cannabis grow rooms.
Untreated, bare concrete is naturally porous, easily absorbing liquids and environmental moisture. Substances found in grow rooms, such as fertilizers, fungicides and other chemicals, can leach through the porous concrete floor slab into the soil and ground water. Whether organic or synthetic, concentrations of such substances can be highly detrimental to the surrounding environment.
Whether in an existing or newly constructed facility, it is not uncommon for the under-slab vapor barrier to be compromised during construction. When this occurs, moisture from the soil beneath the floor slab can enter the concrete and move osmotically upward, creating a phenomenon known as Moisture Vapor Transmission (MVT). The resulting moisture and moisture vapor tends to become ever more alkaline as it rises upward through the concrete slab. MVT can result in blistering, bubbles and other damage to floor coverings.
The warm temperatures, regular watering of plants and high relative humidity maintained within many grow rooms can contribute to a weakening of the structural integrity of unprotected grow room slabs.
Within the confined space of a grow room, the warm, moist air invites microbe proliferation. Food and pharmaceutical plants are high on the priority list when it comes to facility hygiene levels, as demanded by code.
Public health guidelines for cannabis cultivation facilities in various parts of the country are increasingly mirroring those of food processing. Typical requirements include having smooth, durable, non-absorbent floor surfaces that are easily cleaned and in good repair, possessing proper floor slope towards a sanitary floor drain, with no puddling, as well as an integral floor-to-wall cove base. These directives cannot be met with bare concrete alone.
Optimal Grow Room Flooring Performance
In some locations, cannabis growing facilities are already subject to strict building codes and regulations. This will no doubt be spreading to other regions in the near future. For example, the Public Health Agency of Los Angeles County publishes construction guidelines to ensure cannabis facility floors meet standards mirroring the food processing and pharmaceutical manufacturing industries, where sanitation, facility hygiene and safety are paramount. In these types of facilities, bare, unprotected concrete floor slabs are not allowed as a general rule, due to the material’s innate porosity and absorbency.
Flooring in grow rooms, like in their food and pharma industry counterparts, should optimally:
Provide a monolithic and virtually seamless surface to help eliminate crevices, grout lines and other dark, damp locations where soil and pathogens tend to hide
Be impervious and non-porous, providing a surface that can isolate toxic materials on the surface for proper clean-up where needed
Enable correction or improvement of the floor slope for proper drainage, with no low spots to help avoid puddling
Be installed with integral floor-to-wall cove options for easier wash-down and sanitizing
Have the strength and thermal shock resistance, plus the tenacious bond, to undergo steam-cleaning and/or hot power washing, where needed
Enable seamless, continuous surface installation over concrete curbs and containment areas
Offer antimicrobial options for highly sensitive locations
Demonstrate high compressive strength and impact resistance for durability under heavy loads
Display excellent abrasion resistance, allowing the system to perform under grueling daily wear-and-tear
Present customizable slip-resistance options that can be balanced with easy clean-ability
Facilitate the use of floor safety markings, such as color-coded traffic and work area designations
Be formulated with low odor, low-VOC chemistries that meet all EPA and similar regulations
Be able to contribute LEED Green Building Credits, where desired
Include options for refurbishing old or damaged concrete surfaces to allow reuse of existing facility resources, as opposed to having to be demolished, thus unnecessarily contributing to landfill waste
Withstand and perform in continually damp grow room conditions, without degrading
Be compliant with FDA, USDA, EPA, ADA, OSHA, as well as local regulations and/or guidelines
Include MVT mitigating solutions where Moisture Vapor Transmission site issues are present
Provide waterproofing underlayment options for multi-story facilities
Demonstrate excellent resistance to a broad range of chemicals, fertilizers and extreme pH substances
Finding an affordable floor system with all the above features may seem like a tall order. Luckily, innovative manufacturers now offer cannabis facility flooring that meets sanitation, regulatory compliancy, durability and budgetary needs of growers.
Resinous Flooring Value for Cannabis Facilities
Choosing the right floor solutions for a given cultivation facility may be one of the most important decisions an owner or manager makes. Since floors are present throughout the structure, poor selection and compromised protection of concrete slabs can end up wreaking havoc with profits and yields over time.
Few facilities can afford the inconvenience and expense of an otherwise unnecessary floor repair or replacement. Having to suddenly move cumbersome plant beds and heavy pots in order to give workers access to the floor area can be headache. In addition, the unscheduled downtime and overall juggling of resources that invariably must take place make a strong case for investing in optimal grow room flooring from the start.
An excellent long-term value, professional-grade resinous floor systems present cannabis growers with a unique set of solutions for cultivation rooms. Not only does this type of flooring offer all the desirable features listed above, but also furnish a host of added benefits to grow room operations, including:
Very High Gloss Finish
Highly reflective floor surfaces enable light entering the space from overhead to bounce back upward, exposing the underside of leaves to the light and potentially increasing yields
Exceptionally high gloss floor finishes in light colors help make the most of your existing lighting sources, significantly increasing room illumination
Achieving greater illumination without adding fixtures helps reduce energy consumption and associated costs
Virtually Seamless Surface
Fluid-applied resin-based flooring provides an impermeable, monolithic surface that is exceptionally easy to clean and maintain
The virtually seamless finish of resinous coated floors greatly reduces the number of locations for soil, pathogens and microbes to gather
Resinous floors, by incorporating integral cove bases to eliminate ninety degree angles, correcting floor slope to eliminate puddling, and allowing for a virtually seamless surface, provide an optimally sanitary flooring solution
Outstanding Moisture Tolerance
Designed specifically for use in wet industrial environments, cementitious urethane flooring is a top choice for humid grow rooms
Also called “urethane mortar”, this type of floor can help mitigate certain undesirable site conditions, such as Moisture Vapor Transmission (MVT)
Chemical, Acid and Alkali Resistance
Whether organic or synthetic, many soil enhancers and substances used to eradicate undesirable fungi and pests can damage concrete and shorten the usable life of foundational slabs
Protecting concrete slabs with monolithic, non-absorbent and appropriately chemical resistant coating systems allows concrete to perform as designed, for as long as intended
A proper barrier coating on the floor allows spilled or sprayed substances to be properly cleaned up and disposed of, rather than allowing the liquids to seep through the porous slab, and into the surrounding natural environment
Added Safety
Resinous coating systems’ slip-resistance is completely customizable at the time of installation, enabling growers to request more traction in pedestrian walkways and less slip-resistance under raised beds.
Epoxy, urethane and polyaspartic resinous flooring systems accommodate the installation of safety and line markings, as well as varying colors to delineate specific work areas
The antimicrobial flooring options available from some manufacturers offer further hygiene support in highly sensitive facilities
Today’s industrial resinous floor coatings from reputable suppliers are very low to zero V.O.C. and compliant with EPA and other environmental regulations
Resinous coating systems provide ideal value to informed growers who require durable, reliable and long-lasting high performance flooring for their facilities.
Support from the Ground Up
From incredible medical advances to high tensile fiber in construction materials, the expanding cannabis industry is bringing exciting opportunities to many areas of the economy. As more and more growers enter the market, so increases the pressure to compete.
By choosing light reflective, seamless and moisture tolerant resinous flooring that meets regulatory guidelines for grow rooms, managers can help reduce their overhead costs on multiple fronts — and get a jump on the competition.
With recent changes in federal and state law, and growing consumer awareness, the long-dormant hemp industry may finally be able to take heed of George Washington’s advice, “Make the most you can of [India Hemp] … The Hemp may be sown anywhere.”1
Hemp has a long and varied history in the United States. Throughout his lifetime, George Washington cultivated hemp at his Mount Vernon Estate, and, for a time, Washington even considered replacing tobacco with hemp as the Estate’s primary cash crop.2 Like Washington, Thomas Jefferson grew hemp at Monticello and his lesser-known Poplar Forest plantation.3 Both Founding Fathers primarily used the hemp cultivated on their property for making household items like clothing, rope, and fishing nets.
From the colonial era until 1970, hemp was routinely cultivated across the United States for industrial use. But, with the passage of the Controlled Substances Act (“CSA”) in 1970, U.S. hemp production ceased.4 The CSA banned cannabis of any kind, eliminating any distinction between hemp and other types of cannabis. As a result, hemp production became illegal in the United States.
A wide variety of hemp products can be found throughout the Untied States markets. Image courtesy of Direct Cannabis Network
More recently, the U.S. government finally began to ease restrictions on hemp cultivation and production. The 2014 Farm Bill introduced the USDA Hemp Production Program.5 Under the Program, universities and state departments of agriculture are allowed to cultivate hemp if:
The industrial hemp is grown or cultivated for purposes of research conducted under an agricultural pilot program or other agricultural or academic research; and
The growing or cultivating of industrial hemp is allowed under the laws of the state in which such institution of higher education or state department of agriculture is located and such research occurs.
The 2014 Farm Bill did not remove hemp from the auspices of the CSA, nor did it address the continuing application of federal drug control statutes to the growth, cultivation, manufacture, and distribution of hemp products.
The 2018 Farm Bill built upon the deregulation that began in 2014.6 Although both the 2014 and 2018 bills define hemp as the plant Cannabis sativa L. and any part of that plant that has a delta-9 THC concentration of 0.3% or less by dry weight,7 the 2018 Farm Bill took the additional step of removing hemp from the federal list of controlled substances and categorized it as an agricultural product. As a result, the production of hemp is now subject to USDA licensure and regulation. However, until the USDA completes its rulemaking process for implementing hemp regulation, hemp production remains illegal unless done in compliance with the terms of the earlier 2014 bill.8 For the time being, legal cultivation of hemp still must occur in a state that has authorized hemp research9 and the researcher must be either an institute of higher education or a state department of agriculture (or its designee).
With the increasingly favorable changes to federal and state law allowing for the expanded cultivation and production of hemp in the United States, the market is expected to grow significantly in the coming years. In 2014, the U.S. industrial hemp market was estimated at approximately $504 million.10 In only one year after the passage of the 2014 Farm Bill, the industrial hemp market was estimated to have increased by over $95 million to almost $600 million. By 2017, the worldwide market for industrial hemp was estimated to be $3.9 billion and growing at a compound annual growth rate (CAGR) of 14%.
In addition to favorable changes in U.S. law, the hemp market is benefiting from growing consumer awareness and demand for hemp-based food products.11 High in omega-3 and omega-6, amino acids and protein, hemp is growing in popularity as a cooking oil, dairy substitute, flour source and bakery ingredient. Among other things, hemp is considered by some to provide positive health effects for those seeking help with insulin balance, cardiac function, mood stability, and skin and joint health.
Although hemp cultivation is now allowed in the U.S.—at least for research purposes—and the market is forecasted to rise steadily under growing demand for hemp-based products, broad access to viable, legal seeds continues to present a challenge for researchers and commercial growers. In order to legally implement authorized cultivation programs and take economic advantage of a swiftly growing market, farmers must have access to seeds that can be guaranteed to consistently produce plants that fall under the legal definition of hemp. In an attempt to alleviate the problem, several states, including California, Indiana, Maine and Oregon, have implemented programs to license or certify compliant seed distributors and producers.
The importance of hemp seed availability and development has also been recognized on the federal level. On April 24, 2019, the USDA Agricultural Marketing Service published a Notice to Trade announcing that the USDA’s Plant Variety Protection Office (“PVPO”) is now accepting applications of seed-propagated hemp for protection under the Plant Variety Protection Act (“PVPA”). Among other things, the PVPA provides intellectual property protection to breeders who have developed new varieties of seed-propagated plants. Under the new guidance, breeders of new hemp varieties can now secure protection pursuant to the PVPA. Those holding a certificate of protection from the PVPO can exclude others from marketing or selling a registered hemp variety and manage how other breeders and growers use their protected variety.
The process for requesting protection under the PVPA is fairly straightforward. Breeders, or their attorneys, must complete all application forms, pay the required fees,12 submit a distinct plant variety name, and provide a deposit of at least 3,000 viable and untreated seeds of the variety (or 3,000 seeds of each parent variety for a hybrid). One required form for a completed PVPA application is the Objective Description of Variety form.13 This form provides a series of questions that identify the distinct aspects of the variety in question, including, among other things, plant and leaf characteristics, seed properties and anticipated uses. Upon receipt of the completed application and fees, the PVPO examines the application to determine whether the listed plant variety is new, distinct, uniform, and stable. If the PVPO determines that the requirements are satisfied, it will issue a certificate of protection granting the owner exclusive rights to the registered variety for a period of 20 years.Now is the time for farmers, researchers, and hobbyists alike to take advantage of the expanded opportunities available for protecting intellectual property for proprietary hemp varieties.
Although hemp has traditionally been used in the textile and fiber industries, the estimated 17.1% CAGR in the hemp seed segment is being driven by the increase in demand for hemp oil, seedcakes, and other food and nutraceutical products. These products are primarily derived from the hemp seed as opposed to its fibers. Presently, hemp seeds contain approximately 30-35% oil, of which approximately 80% is essential fatty acids, and 25% crude protein.14 Under the new PVPA guidelines, if a breeder is able to cultivate a sustainable plant that increases the plant’s production of the desirable compounds, he or she could achieve a significant position in the growing market.
The protection provided by the newly expanded PVPA builds upon other avenues of intellectual property protection now available to hemp breeders and growers. In addition to the PVPA, plants meeting certain criteria may also be protectable under a plant patent or a utility patent, both of which are administered by the U.S. Patent and Trademark office. Generally speaking, PVPA protection may be available for seeds and tubers, plant patent protection applies to asexually propagated plants, and utility patent protection may be available for genes, traits, methods, plant parts and varieties.15
With a market that is expected to grow substantially in the near future, and with the passing of increasingly friendly federal and state legislation, the hemp industry is on the cusp of significant expansion. Now is the time for farmers, researchers, and hobbyists alike to take advantage of the expanded opportunities available for protecting intellectual property for proprietary hemp varieties.
George Washington to William Pearce, 24 February 1794.
To date, at least 41 states have passed legislation authorizing hemp cultivation and production programs consistent with federal law. As of the date of this article, those states that have not enacted legislation allowing the cultivation of hemp for commercial, research, or pilot purposes include: Connecticut, Georgia, Idaho, Iowa, Louisiana, Mississippi, Ohio, South Dakota, Texas, and the District of Columbia.
Currently, the Food and Drug Administration prohibits hemp-based CBD in food and beverages. However, the FDA has set a public hearing to discussing the legalization of CBD in food and beverages for May 31, 2019.
The PVPA application fee is currently $4,382 with an additional fee of $768 due upon issuance of a certificate of registration.
Hemp Seed (Cannabis sativa L.) Proteins: Composition, Structure, Enzymatic Modification, and Functional or Bioactive Properties,Sustainable Protein Sources (Ch. 7), R.E. Aluko (2017).
Regulations are currently under consideration that could expand or otherwise modify the scope of protection available under each of the enumerated intellectual property protection schemes. Consult a licensed attorney for questions regarding the specific program that may apply to a particular set of circumstances.
Earlier this month, the House passed HB 1438 in a 66-47 vote, with bipartisan help. Roughly 24 hours before that, the same bill cleared the Senate in a sweeping 38-17 vote. Governor J.B. Pritzker signed the Cannabis Regulation and Taxation Act (CRTA) into law on Tuesday, making Illinois the 11th state in the nation to legalize adult use cannabis and the first to do so via the legislature.
Illinois Governor J.B. Pritzker campaigned and won the election on this issue and helped design HB 1438. Sponsors of the bill, Senator Heather Steans (Chicago-D) and Representative Kelly Cassidy (Chicago-D), along with Governor Pritzker, have been viewed as the architects of this piece of legislation.
Some supporters say the state legalizing cannabis in this particular fashion will have shockwave effects throughout the rest of the country. Not only did Illinois pass this legislation, but they did so with social equity and public health in mind. Back when the sponsors of the bill announced their intentions in January this year, Sen. Steans told a town hall meeting in Springfield, “We have a huge opportunity in Illinois to do this right and carefully… If we don’t address the social-justice issues of this, if we don’t address the collateral consequences of the ‘war on drugs,’ we will have failed.”
The Marijuana Policy Project (MPP) has a handy overview of the legislation that breaks down exactly what was legalized. An MPP press release says this legislation is, “the most far-reaching social equity provisions ever included in a legalization law. It includes reinvestment in communities disproportionately harmed by cannabis prohibition, broad expungement provisions, and measures to ensure the industry includes communities that have been targeted by cannabis enforcement.”
Fouser Environmental Services LTD, a laboratory based in Versailles, Kentucky, became the first cannabis testing laboratory accredited in the state last week, according to a press release. The American Association of Laboratory Accreditation (A2LA) announced the lab’s successful accreditation to ISO/IEC 17025:2017.
“We congratulate Fouser Environmental Services on becoming the first cannabis testing laboratory accredited in the state of Kentucky. Their completion of this milestone in such a timely manner through the A2LA accreditation process is a testament to their hard work and commitment to quality”, says Adam Gouker, A2LA General Manager. “A2LA realizes the vital role that accreditation plays in the cannabis industry to support compliance with regulatory requirements, and we are thrilled to see that our service has been adopted in a new state. We look forward to our continued relationship with Fouser Environmental Services in the provision of their accreditation needs.”
Fouser Environmental Services has been an environmental testing lab in Kentucky for more than 30 years. A statement by the lab in the press release says they want to support the hemp industry as it continues to grow in Kentucky. “It is our great honor to be the first A2LA ISO/IEC 17025:2017 accredited laboratory for cannabis testing in the Commonwealth as we continue to strive to perform accurate analysis and release reliable data to the growing hemp industry within Kentucky and throughout the country,” reads the press release.
Core values often get wrapped into buzzwords such as sustainability, locally sourced and organic. In the first part of a series of four articles exploring greenhouses and the environment, we’re going to take a look at indoor vs. outdoor farming in terms of resource management.
Full disclosure; I love the fact that I can eat fresh blueberries in February when my bushes outside are just sticks. Is there a better way to do it than trucking the berries from the farm to a distribution plant to the airport, where they’re flown from the airport to a distribution center, to the grocery store and finally to my kitchen table? That’s a lot of trucking and a lot of energy being wasted for my $3.99 pint of blueberries.The largest generation in the history of the country is demanding more locally grown, sustainable and organic food.
If those same blueberries were grown at a local greenhouse then trucked from the greenhouse directly to the grocery store, that would save diesel fuel and a lot of carbon emissions. People who can only afford to live near a highway, a port or an airport don’t need to ask a pulmonary specialist why their family has a higher rate of COPD than a family who lives on a cul-de-sac in the suburbs.
Fact: 55% of vegetables in the U.S. are grown under cover. The same energy saving principles apply to indoor cannabis and the reasons are consumer driven and producer driven. The largest generation in the history of the country is demanding more locally grown, sustainable and organic food. They want it for themselves and they want it for their kids.
The rapid proliferation of greenhouses over the past ten years is no coincidence. Millennials are forcing changes: organic fruit and vegetables now account for almost 15% of the produce market. A CNN poll last month revealed that 8 of 10 of registered Democrats listed climate change as a “very important” priority for presidential candidates. The issue is not party I.D.; the issue is that a large chunk of Americans are saying they’re worried about the direct and indirect impacts of climate change, such as increased flooding and wildfires.
So how does the consumer side tie into the cannabis industry? Consumers like doing business with companies who share their values. The hard part is balancing consumer values with investor values, which is why many indoor growers are turning to cultivation management platforms to help them satisfy both constituencies. They get the efficiency and they get to show their customers that they are good stewards of their environment. The goal is to catch things before it’s too late to save the plants. If you do that, you save the labor it costs to fix the problem, the labor and the expense of throwing away plants and you reduce pesticide and chemical usage. When that happens, your greenhouse makes more money and shows your customers you care about their values.
The indoor change is happening rapidly because people realize that technology is driving increased revenue while core consumer values are demanding less water waste, fewer pesticides, herbicides and fertilizers.Let’s add some more facts to the indoor-outdoor argument. According to an NCBI study of lettuce growing, “hydroponic lettuce production had an estimated water demand of 20 liters/kg, while conventional lettuce production had an estimated water demand of 250 liters/kg.” Even if the ratio is only 10:1, that’s a huge impact on a precious resource.
Looking at the pesticide issue, people often forget about the direct impact on people who farm. “Rates in the agricultural industry are the highest of any industrial sector and pesticide-related skin conditions represent between 15 and 25% of pesticide illness reports,” a 2016 article in The Journal of Cogent Medicine states. Given the recent reports about the chemicals in Roundup, do we even need to continue the conversation and talk about the effects of fertilizer?
I’ll finish up with a quote from a former grower. “The estimates I saw were in the range of between 25%-40% of produce being lost with outdoor farming while most greenhouse growers operate with a 10% loss ratio.”
The indoor change is happening rapidly because people realize that technology is driving increased revenue while core consumer values are demanding less water waste, fewer pesticides, herbicides and fertilizers. Lastly, most Americans simply have a moral aversion to seeing farms throw away food when so many other people are lined up at food banks.
Whether your cannabis business is a start-up in its infancy, or established with a loyal customer following, the product packaging you use is essential to building and maintaining your brand. The packaging is the first thing a potential customer sees, and it creates that critical first impression. While the primary function is to contain, protect, and market your products, your packaging is a reflection of your company to the customer. In many ways, the package is the product. Partnering with a quality plastic packaging manufacturer for your cannabis products will increase your success.
Bottles made of high-density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), and polyethylene terephthalate (PET) have become widely-accepted packaging options within the cannabis industry. There are many plastic bottle manufacturers, but how do you find the right one? In short, seek a manufacturer who makes quality products that are unlikely to present downstream problems for your company, provides services and options that align with things you feel are important, and wants to build a long-term relationship with you so both of your businesses grow faster through strategic partnership.
What to Look for in a Plastic Bottle Manufacturer
Excess Bottom Flash creates a poor printing surface.
As you search for a packaging partner for your cannabis business, here are a few key things to look for:
Bottles That Visually Support Your Brand
It’s essential to partner with a manufacturer who understands the importance of defect-free plastic bottles. Does everything about your packaging convey a sense of trust for your customers? Defects in plastic bottles typically occur during the manufacturing process.
Excessive Side Taper results in uneven, wrinkled labels.
For instance, excessive side taper on the bottles can result in uneven, wrinkled labels that are hard to read and make your product look unprofessional. If flashing on the bottle bottom is not removed, it creates a poor printing surface and results in a poor brand impression.
Partnering with a manufacturer who understands that plastic bottle defects diminish brand presence and who continually strives to remove defect-producing problems out of their manufacturing process is of utmost importance. This avoids many downstream quality problems and helps to keep the focus on growth and off of damage control.
Bottles That Minimize Risk and Waste
Product recalls or safety concerns can be a result of cloudy bottles or material trapped in the resin that makes the plastic packaging look dirty or contaminated. These situations can erode consumer confidence in your brand or expose the customer to risk.
Foreign material trapped in the resin results in reduced customer confidence.
Sub-par plastic bottles can lead to inefficiencies on your filling lines, lost production time, and product that cannot be sold. These situations lead to reduced profitability and negatively impact your bottom line. It’s never good when filled packaging or product has to be thrown away because problems are identified on the filling line.
Uneven Sealing Surface results in poor closure seal and increased risk of product spoilage or contamination.
Worse yet is when your product reaches the point of sale and the problems are identified at the dispensary or by a consumer. For example, over time, an improper seal between the plastic bottle and cap can cause flower to be excessively dry. In turn, when this flower is dispensed to the consumer it can lead to overfilling to make up for weight loss. And some consumers just don’t like their flower to be too dry, resulting in lost sales. Does the defective product get shipped back or trashed at the point of sale location? In either case, this results in the dilemma of wasted product that can’t be used and extra costs that eat into your profitability.
Closures That Work With The Bottle
The closures for the bottles are also an important part of your cannabis packaging. Can your packaging partner manufacture and supply plastic closures that assure complete functionality to protect your product? Closures produced by the same manufacturer as the bottles ensures that the closure and bottle function correctly together. A one-stop-shop approach will save you time and money.
The cannabis industry is growing quickly and faces many complex regulatory challenges, including regulations for child-resistant packaging. Many states have their own unique cannabis packaging requirements which must be strictly adhered to. Are their bottle and closure pairings compliant with current regulations and those that are under legislation for the future?
Customization for Your Brand
Can the cannabis packaging manufacturer customize their products to your exact design and specifications? Your product is unique, and your packaging should reflect that. Make sure your brand stands out with the exact image you want to project. There should be “depth” in your supplier: can they do more than just sell you packaging that already exists?
A Safe Resin Source
Another important aspect of safety is country of origin. Plastic bottles and closures manufactured overseas may have impurities in the resin or colorant that could leach or bleed into your products. They may not have documentation of origin or comply with FDA regulations. Your plastic packaging partner should be able to provide this documentation so you can rest assured that your bottles are manufactured under strict guidelines for the safety of your consumers and that your product won’t be affected.
Commitment to Sustainability
To many consumers, packaging made from recycled materials is important. Does your packaging supplier have a strong commitment to environmental sustainability? There is strong market support for carbon-friendly alternatives. Progressive plastic packaging manufacturers are actively working to provide alternatives to plastics made from fossil fuels and instead, using resins produced from renewable resources (i.e. sugarcane). By partnering with a supplier that provides alternative and recycled materials, you enhance your brand by appealing to a growing segment of environmentally concerned consumers.the best cannabis packaging suppliers understand that consistency in the manufacturing process is essential.
Scalable Growth
As your business grows, can your packaging partner grow with you? It’s important that they are able to keep up with the demand for your product and that their supply chain can match your manufacturing needs. As you add to your product line, are they capable of continuing to offer new and innovative packaging? A manufacturer that has a strong business model for growth will benefit you now and for the future.
A Real Cannabis Packaging Partner
Your cannabis business should develop a true partnership with your packaging supplier. They should invest in your success and care about your business. Businesses depend on one another for continued growth – look for a knowledgeable partner that is responsive, courteous and dependable now and for years to come. The best suppliers realize that there is more to a relationship than just the financial transaction of buying packaging.
Additionally, the best cannabis packaging suppliers understand that consistency in the manufacturing process is essential. Using virtually perfect bottles time after time not only reduces waste but helps build consumers’ trust in your brand. Consistency saves you three precious commodities – time, hassle and money.
Remember, a brand consists of more than just a logo and company name. It identifies who you are, what your company stands for and the integrity of your product. Quality cannabis packaging will reinforce your company standards and attract consumers to your product – consistently defining you as a quality provider with integrity in the marketplace. Improving your bottom line and meeting your company’s financial goals is at stake. Is your cannabis packaging partner going to help you grow?
There’s no denying that the cannabis industry is experiencing a boom. While it feels a bit like the wild west, many organizations are riding a wave of (mostly) positive publicity as opportunities increase for cannabis products and distribution.
From a public relations standpoint, relying on this initial excitement, however, is shortsighted at best. As regulations allow for increased competition in many markets such as cannabis dispensaries, manufacturers and distributors, we must find new ways to creatively garner positive attention while staying compliant with regulations.
But what do you do after the initial excitement fades? How do you individualize your company to make it stand out and sustain within the market? For many, the solution is held within a strategic community relations program.
No matter the size or reach of the organization, we encourage many of our clients, especially those in the cannabis industry, to engage with their immediate communities. Not only does this demonstrate that you’re invested in the well-being of your neighbors, but can provide long-term benefits, such as brand loyalty and improved public image.
Here are four reasons why businesses in the cannabis industry should be investing in community relations outreach:
1. Initial Publicity Only Lasts So Long
Like the gold rush, businesses are looking to help themselves to a slice of the cannabis pie. And understandably so. In 2018, the industry earned nearly $10 billion in the U.S. last year, creating 64,389 jobs, according to CNBC. With the newness of the industry comes a lot of excitement and media attention. While this attention is great for those first-to-market trailblazers, as competition increases, the newsworthiness will dwindle.So, what’s the best way to gain awareness without blatantly advertising? The answer is giving back.
For examples of this, look no further than the tech industry. Remember when apps (or websites if you want to go way back) used to be a big deal? In order to stand out in a crowded marketplace you must be different and have a story to tell. Making a meaningful connection through outreach will help you succeed long after the first wave of publicity fades away.
2. Regulations Rule
In many ways, your hands are tied when it comes to advertising or promoting a cannabis business versus a traditional retail product or location. In some states, it’s almost entirely off the table. So, what’s the best way to gain awareness without blatantly advertising? The answer is giving back. Community outreach programs through philanthropic efforts will help build your business, create brand awareness and bring people together. Community relations is a critical part of getting the word out even in the face of strict regulatory guidelines. And the best part – it can be inexpensive to do. As an added bonus, you make friends and create advocates in the process.
3. Combat the Stigma
In some states and communities, cannabis still faces a bad rap. Currently only 33 states have legalized medical cannabis, while 11 states have legalized cannabis recreationally. And even with growing legalization and acceptance, the industry must still combat outdated stigmas and misgivings. By making your business a reputable part of the community you will build trust and loyalty. Take this as an opportunity to educate the community about the facility and meet staff members.
4. Stay in Good Graces
Community relations is a great way to create ambassadors out of community leaders and influencers. Simply put, people are more interested in supporting an organization that supports them in return. Show that you’re invested in your neighbors and ingrained in the success of the local business community. As an added bonus, community involvement will also help boost public image and build the morale of employees. This is important for long-term success of your company as well as employee retention.
No matter what your reason for implementing a community relations initiative, you’ll find it to be a great addition to your public relations strategy.
The best part- community outreach doesn’t have to be extravagant, either. Coat drives, food drives or volunteering time with local events are all great ways to show your support for the community while raising your own profile.
As the cannabis industry continues to grow and competition increases, you’ll feel good about setting the bar high as a responsible and thoughtful invested member of your local business community.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
