Tag Archives: CCTT

Learning from the First Wave Part 1: How Law Shapes the California Cannabis Industry

By Todd Feldman
No Comments

As a cannabis lawyer, I spend a lot of time thinking about the ways that regulations affect a cannabis company’s bottom line. Since I’m in California, the ways are many.

In late 2017 I became the chief compliance officer for an Oakland startup that carried out delivery, distribution, cultivation and six manufacturing operations. A big part of my job was preparing my company, along with several equity cannabis companies, for California’s First Wave of cannabis licenses.

For the most part, First Wave licensees came from California’s essentially unregulated medical cannabis market, and/or from California’s by-definition unregulated “traditional” market. When California began issuing licenses in January 2018, many First Wavers were unprepared because their businesses practices had evolved in an unregulated market. A big part of my job was to help them adapt to the new requirements. As a result, I saw the regulations, and the effects of regulations, in sharp relief.

Regulation touches virtually every aspect of the legal cannabis industry in California. So anyone who wants to understand the industry should have at least a basic understanding of how the regs work. I’m writing this series to lay that out, in broad strokes.

Some key points:

  • The regulated market must be understood in relation to the previous unregulated (medical) market as well as the ongoing traditional market.
  • Regs define the supply chain.
  • Regs are designed to ensure product safety and maximize tax revenue.
  • Many regulations mandate good business practices.
  • Local enforcement of building, health and safety codes tends to be zealous and costly.

A Tale of Three Markets

California’s regulated cannabis market can only be understood in relation to the medical market that preceded it, and in relation to the traditional market (illegal market) that continues to compete with it.

The Before Times

California’s legal medical cannabis market goes back to 1996, when the Compassionate Use Act passed by ballot measure. One fact that shaped the medical market was that it was never just medical – while it served bona fide patients, it also served as a Trojan horse for adult-use (recreational) purchasers.

Another fact that shaped the medical market was a near complete lack of regulation. On the seller’s side, you had to be organized as a collective. On the buyer’s side, you had to have a medical card. That was it.

Meanwhile, the cannabis supply chain was entirely unregulated. This tended to minimize production costs. It also meant that a patient visiting a dispensary had no way of verifying where the products had been made, or how.

The Regulated Times

Licensing under the Medical and Adult-Use Cannabis Regulation and Safety Act (the “Act”) began on January 1, 2018. It was the beginning of legal adult-use cannabis in California. It was also the beginning of the Regulated Times, as the Act and accompanying 300-plus pages of regulations transformed the legal cannabis market.

 For example:

  • The Act defines the cannabis supply chain (as a series of licensees).
  • Across the supply chain, the internal procedures of cannabis companies are subject to review by state agencies;
  • Cultivators and manufacturers cannot sell directly to a dispensary – they must go through a distributor;
  • All cannabis must be tested for potency and a long list of contaminants by a licensed testing laboratory before it may be sold to consumers;
  • And beginning in 2019, all licensees were required to participate in the California Cannabis Track and Trace (CCTT) program, which is designed to track all cannabis from seed to sale.

Just as importantly, the Act establishes a dual licensing system – that is to say, in order to operate, a cannabis company needs a local permit (or other authorization) as well as a state license. In fact, local authorization is a prerequisite for a state license. And your local jurisdiction will have its own rules for cannabis that apply in addition to the state rules, up to and including a ban on cannabis activities.

Needless to say, operating in the Regulated Times is a lot more complicated and expensive than it was during the Before Times.

Especially when you consider the taxes. For example, in the City of Los Angeles, sale of adult-use cannabis is taxed at 10%, which means that any adult-use purchase in L.A. gets a 34.5% markup:

  • 15% state cannabis excise tax, plus
  • 10% Los Angeles Adult Use Cannabis Sales tax, plus
  • 5% sales tax.

Note that the distributors must collect the excise tax from the retailer, so the 15% markup is not necessarily visible to the consumer. Similarly, consumers are generally unaware that there is a cultivation tax of $9.65 per ounce (or about $1.21 per eighth) of dried flower that the distributor has to collect from the cultivator.

Theoretically, all of this might be unproblematic if licensed retailers were only competing with each other. Which brings us to:

The Traditional Market

The traditional market is the illegal market, which is to say, the untaxed and unregulated market.

Legalization of adult-use cannabis was supposed to destroy the traditional market, but it hasn’t. As of early 2020, the traditional market was estimated to be 80% of the total cannabis market in California. This is not surprising, since the traditional market has the advantages of being untaxed and unregulated.

The traditional market has a pervasive negative effect on the legal market. For example, the traditional market tends to depress prices in the legal market and tends to attract talent away from the legal market. Some of these effects will be discussed in the following articles.

This article is an opinion only and is not intended to be legal advice.

Why Comply: A Closer Look At Traceability For California’s Cannabis Businesses

By Scott Hinerfeld
3 Comments

Compliance should be top of mind for California’s cannabis operators. As the state works to implement regulations in the rapidly-growing cannabis industry, business owners need to be aware of what’s required to stay in good standing. As of January 1, 2019, that means reporting data to the state’s new track-and-trace system, Metrc.

What Is Track-and-Trace?

Track-and-Trace programs enable government oversight of commercial cannabis throughout its lifecycle—from “seed-to-sale.” Regulators can track a product’s journey from grower to processor to distributor to consumer, through data points captured at each step of the supply chain. Track-and-trace systems are practical for a number of reasons:

  • Taxation: ensure businesses pay their share of owed taxes
  • Quality assurance & safety: ensure cannabis products are safe to consume, coordinate product recalls
  • Account for cannabis grown vs. cannabis sold: curb inventory disappearing to the black market
  • Helps government get a macro view of the cannabis industry

The California Cannabis Track-and-Trace system (CCTT) gives state officials the ability to supervise and regulate the burgeoning cannabis industry in the golden state.

What Is Metrc?

Metrc is the platform California cannabis operators must use to record, track and maintain detailed information about their product for reporting. Metrc compiles this data and pushes it to the state.

Who Is Required To Use Metrc?

Starting January 1, 2019, all California state cannabis licensees are required to use Metrc. This includes licenses for cannabis: Proper tagging ensures that regulators can quickly trace inventory back to a particular plant or place of origin.

  • Cultivation
  • Manufacturing
  • Retail
  • Distribution
  • Testing labs
  • Microbusinesses

How Does Metrc Work?

Metrc uses a system of tagging and unique ID numbers to categorize and track cannabis from seed to sale. Tagged inventory in Metrc is sorted into 2 categories: plants and packages. Plants are further categorized as either immature or flowering. All plants are required to enter Metrc through immature plant lots of up to 100/plants per lot. Each lot is assigned a lot unique ID (UID), and each plant in the lot gets a unique Identifier plant tag. Immature plants are labeled with the lot UID, while flowering plants get a plant tag. Metrc generates these ID numbers and they cannot be reused. In addition to the UID, tags include a facility name, facility license number, application identifier (medical or recreational), and order dates for the tag. Proper tagging ensures that regulators can quickly trace inventory back to a particular plant or place of origin.

Packages are formed from immature plants, harvest batches, or other packages. Package tags are important for tracking inventory through processing, as the product changes form and changes hands. Each package receives a UID package tag, and as packages are refined and/or combined, they receive a new ID number, which holds all the other ID numbers in it and tells that package’s unique story.

Do I Have To Enter Data Into Metrc Manually?

You certainly can enter data into Metrc manually, but you probably won’t want to, and thankfully, you don’t have to. Metrc’s API allows for seamless communication between the system and many of your company’s existing tracking and reporting tools used for inventory, production, POS, invoices, orders, etc. These integrations automate the data entry process in many areas.As California operators work to get their ducks in a row, some ambiguity and confusion around Metrc’s roll out remains. 

Adopting and implementing cannabis ERP software is another way operators can automate compliance. These platforms combine software for point of sale, cultivation, distribution, processing and ecommerce into one unified system, which tracks everything and pushes it automatically to Metrc via the API. Since they’ve been developed specifically for the cannabis industry, they’re designed with cannabis supply chain and regulatory demands in mind.

As California operators work to get their ducks in a row, some ambiguity and confusion around Metrc’s roll out remains. Only businesses with full annual licenses are required to comply, leaving some temporary licensees unsure of how to proceed. Others are simply reluctant to transition from an off-the-grid, off-the-cuff model to digitally tracking and reporting everything down to the gram. But the stakes of non-compliance are high— the prospect of fines or loss of business is causing fear and concern for many. Integrated cannabis ERP software can simplify operations and offer continual, automated compliance, which should give operators peace of mind.