Tag Archives: compliance

September 20, 2018

Canadian Regulatory Authorities Struggling To Define Rules

By Marguerite Arnold

Now that Canada finally has a date for the recreational market start, the federal government, provinces and other regulatory authorities are beginning to issue guidelines and rules that are going to define the early days of the recreational industry.

These include regulations on retail trade, medical sales and use. However this is precisely where the confusion is growing.

The Government Will Continue To Run The Medical Cannabis System

In a move to protect patients, Health Canada has announced that it will continue to run the medical part of the market for at least the next five years. In good news for medical users, this announcement was made against calls from the Canadian Medical Association for the medical infrastructure developed on Canada’s path to recreational reform to be phased out. The reason, according to the CMA? Many doctors feel uncomfortable prescribing the drug because of a lack of research and a general lack of understanding about dosing.

Both patients and advocates have expressed support for continuing the medical system. This includes organizations like the Canadian Nurses Association who fear that if a focus is taken off of medical use, producers will ignore this part of the market to focus only on recreational sales.

In the future, after legalization, Health Canada will also continue to support more research and trials.

Provinces Are Setting Their Own Rules For Recreational Sales

Despite early statements, the recreational market is still in the throes of market creation and regulation. The laws are also changing in progress, a situation one regulator has described as building an airplane as it hurtles down the runway for take-off.

Athletes in Canada are still banned from using any kind of cannabis.For example, Ontario, the largest provincial market, is also delaying private sector sales in retail shops until next year. It is also moving away from a government-run dispensary model. Government sales will begin in October, but private dispensaries will have to wait until next April to open their doors (and existing operations will have to close their doors while they apply for licenses). This is also a reversal of the regional government’s position that it would only allow government-controlled shops to sell recreational cannabis.

But perhaps the largest unknown in both national and provincial policy outside of retail brick and mortars is in the area of online sales. A major fight is now brewing in many places where the established industry is now siding with the government about unregistered dispensaries (see Ontario) and established if not registered producers are competing directly with the government not only on main street but online as well.recreational users are beginning to sound alarms that they do not want the government to have so much personal information about them

Retailers with a web presence operating in a grey space will continue to pose a significant challenge to the online system now being implemented by the government for two reasons. Product availability (which will be far more limited on the government-run sites) and privacy.

Beyond the lack of diverse products and strains to be initially offered via the online government portals, recreational users are beginning to sound alarms that they do not want the government to have so much personal information about them – and point specifically to the differences in the regulated alcohol industry vs. the new regulations for the recreational cannabis market.

Beyond Market Rules, There Are Other Guidelines Coming

The Canadian military has now issued guidelines for active duty personnel and cannabis. It cannot ban it from soldiers entirely of course, and as it stands, the situation will be ripe for misunderstandings. For example, soldiers are prohibited from consuming cannabis 8 hours before any kind of duty, 24 hours before the operation of any kind of vehicle or weapon and 28 days before parachuting or serving on a military aircraft.

The only problem, of course, is being able to enforce the same. Cannabinoids, notably THC, can stay in the body for up to 30 days for casual users long after the high is over.

Athletes in Canada are still banned from using any kind of cannabis. The reason? They are subject to the Canadian Anti-Doping Program (CADP) under which the use of cannabis will still be prohibited.

That said, the Canadian Hockey League is reportedly now examining how to revise how it addresses the issue of medical use.

September 19, 2018

Packaging Design for Cannabis Products: How to Build Trust and Gain Customers

By Katie Lundin

No Comments

To sell more cannabis products, you must build trust with your customers. Design Shack Magazine explains: “Trust is a key component of user loyalty, and a reason why people come to your company or brand.”

If you don’t get your package design right, people might simply ignore your cannabis products.But building trust is a big challenge for new medical cannabis businesses. That’s where good design can help:“While a lot of trust comes from past performance and a brand’s track-record, it also comes from the design. How a website, poster or package looks can impact how users feel about it and whether they take the leap from casual looker to brand loyalist.”

For a cannabis health supplement business, the product packaging design is one of the most important ways to reassure consumers and build trust.

When a prospective customer first sees your product, they see the packaging before they can touch or see the product. Good product packaging can raise concerns or instill comfort and confidence in a potential buyer.

If you don’t get your package design right, people might simply ignore your cannabis products.

So, let’s take a look at what your business can do to create great product packaging designs that will win over the skeptics and gain customers.

Include the Right Content On Product Packaging

Designing packaging that inspires trust starts with including the right content.

Start by telling people exactly what’s inside your packaging. For example, specify what your product is (CBD Extract Oil vs. Full-Spectrum Hemp Oil Caplets), how much of it there is, a production lot number and a potency level.

Include any qualifiers that may reassure your customers – such as “Organic,” “Non-GMO” or “CO2-Extracted.”

Image courtesy of Kannabia Seed Company

Communicate this information in clean, concise language that shows you have nothing to hide. And, speaking of not hiding – include contact information for your business. Many businesses bury their contact info on their websites and packaging. Don’t do that.

People trust businesses that are transparent and easy to reach. Customers want to know that if they have a question or something goes awry with an order that they can get help.

Including your web address, support email and phone number is a powerful way to reassure clients that your business is legitimate and trustworthy.

And, no packaging is complete without branding elements to help customers identify who your business is and what you’re about. This should include your company’s logo, identifying brand colors and any other small visual elements your brand may use.

Finally, make sure to follow the FDA guidelines for dietary supplement labels.

Your content checklist for product packaging

Include the essential details
- What’s inside?
- How much?
- What’s the potency and dosage?
- When does it expire?
- What’s the lot number?
Include reassuring qualifiers that your audience will value
- Organic, CO2-Extracted, Full Spectrum, Contains Less Than 0.3% THC, etc.
Include your company’s contact info
- Web Address
- Customer Support Email
- Customer Support Phone number
Include your visual branding elements
- Logo
- Tagline
- Brand Colors
- Small branded graphic elements

Keep the Packaging Design Simple

Clean, simple design is reassuring and inspires trust.

Image courtesy of Receptra Naturals

That’s because simple design makes it easy for customers to find what they need or want to know.

It’s easy to miss information in a cluttered design – and people know this.

People naturally mistrust the dense chunks of text at the bottom of many advertisements and product packages. On the other hand, clean, easy-to-read fonts and plenty of white space ensure that your audience can read your product packaging and find the information they want quickly without too much trouble.

With fewer words and graphics competing for attention, the important stuff naturally stands out. And, a simple design also sends the message that there are no hidden loopholes or secrets that may work against your customers.

Keep the Design Of Your Product Packaging Professional

It doesn’t matter how great your product is if your business comes across as unprofessional. And, for medical cannabis businesses, the bar for establishing professionalism is even higher than for most companies.

Keep these tips in mind to communicate professionalism and reliability.

Image courtesy of Sagely Naturals

Make sure your packaging is error-free

Mistakes don’t look professional. How many times have you wondered how an error could have passed through so many hands unnoticed that it made it onto the final version?

Consumers notice errors in your packaging design. They see typos and often, discover incorrect or misleading information. Errors make customers think that your business is incompetent. Or worse – they might think that your business is deliberately misleading them. Make sure you proof-read everything before your packaging goes to production.

Showcase Your Cannabis Products Well Against Competitors

People buying your cannabis products will have other options. Don’t ignore your competition and be sure to understand how other dietary supplements and medicine is packaged.

Want to build trust by encouraging consumers to group your CBD products with other trusted medical brands? Follow these tips:

Provide a list of ingredients and instructions for safe dosing and usage. People expect this from reputable medicinal brands. Your product packaging should dothis too. And, remember to follow the FDA’s labeling requirements for dietary supplements.
Incorporate a safety seal into your packaging design. You’ll notice that most medicines, vitamins, and supplements have a safety seal to protect the contents. Whether you opt for a shrink-wrapped seal over the lid or a foil seal under the cap, adding a safety seal shows that your product has not been tampered with and implies that it’s safe to use.

Incorporating these elements will create a mental link between your product and other trusted medicinal products.

Be authentic to your cannabis brand

Last, but not least, your packaging design must align with your brand. When consumers sense a disconnect between the brand identity they’ve come to identify with your business and the packaging design for your products, it creates discomfort.

Image courtesy of Direct Cannabis Network

But packaging that is in line with (or expands upon) the brand identity consumers have come to know will create comfort and trust.

Kevin Keating at PKG Brand Design explains:

Your brand’s packaging design must reflect your company’s story, product, and values. If your packaging claims a “simple” snack product with dozens of ingredients, consumers are going to be left with a disingenuous feeling about your products and company. By ensuring that your messaging, design, and visual impact is in line with your company and your consumer’s preferences, you can build instant trust.

So, ensure that your packaging design is consistent with your existing visual identity. This includes the name of your business or cannabis product, your cannabis business logo, website, and marketing design.

A united and cohesive visual brand presence looks professional and helps to build familiarity – which is key to developing trust. Ultimately, many people judge products based solely on the product packaging. That’s why it’s essential to make sure your product packaging sends the right message.

September 18, 2018

A2LA Partners With ATACH

By Aaron G. Biros

No Comments

Last week, the American Association for Laboratory Accreditation (A2LA) and the American Trade Association for Cannabis and Hemp (ATACH) announced a new partnership agreement. This partnership is the first of its kind where a laboratory accreditation body and a cannabis trade organization work together under an MOU.

According to the press release, the two organizations hope to promote “foundational standards for quality control testing and regulatory guidelines that promote product safety.” Both organizations will advocate for the adoption of industry standards they deem appropriate for recreational and medical cannabis as well as hemp testing in the United States.

Michael Bronstein, executive director of ATACH, says there is an urgent need for open-source consensus standards and standard test methods for cannabis testing. “In an industry that lacks standard test methods and where testing is such a crucial part of the regulatory landscape, the need for open-source consensus standards is especially significant,” says Bronstein. “The development and adoption of standard test methods for cannabis testing is essential in ensuring consistency between laboratories, encouraging uniformity in state testing regulation, and providing a safe and consistent product to consumers.”

The press release also states that A2LA and ATACH seek to “develop regulation and adopt industry standards with goals of advancing and professionalizing the industry.”

September 14, 2018

A Province-By-Province Look At Recreational Cannabis In Canada

By Marguerite Arnold

No Comments

Federal recreational reform is coming to Canada next month, the second country after Uruguay to take the plunge. For the first time in almost a century, in other words, cannabis is now about to be legal again.

The federal government will license and regulate the industry. However each province and territory (analogous to American states) will set the rules on distribution and sales. As a result, there is quite a bit of difference across the country with implications both for licensed producers (LPs) and consumers.

A quick guide to the general Canadian regulations broken down by Province.

Who Can Buy, Sell and Grow?

With two exceptions, the legal age of consent is 19, home growing of up to 4 plants is allowed across many provinces (with only Quebec, Manitoba and Nunavut banning the practice), and rules vary by province on both public and private consumption.

However what the industry is really looking at right now is where private enterprise will be allowed to flourish at the retail end of the industry. Private retailers will be allowed to operate in 7 provinces and territories where they will compete with government run outlets. In New Brunswick, Nova Scotia, Ontario, Prince Edward Island, Quebec and the Yukon, consumers will be required to shop in only government-run establishments.

Nunavut, with no licensed producers, will allow online sales only, even in a recreational market. This gives Tilray an instant advantage with their established online presence not only from the company website, but Leafly.However, the two largest provinces are also where the competition will be most intense nationally.

Power Provinces

One of the most interesting statistics to look at is mapping this information to the number (and size) of licensed producers in each province. For example, Ontario currently clocks in at 59 producers, British Columbia at 23, Quebec at 8 and Alberta at 6, while the Yukon, the Northwest Territories and Nunavut have none. Of these, Ontario and Quebec will not allow producers to sell direct to private establishments but rather mandate sales via government-run dispensaries.

Ontario is slated to become the largest of all provincial markets in the country with Quebec coming in second.

However, the two largest provinces are also where the competition will be most intense nationally.

Where The Big Dogs Lie

Even these statistics do not tell the entire story. The biggest producers (especially those engaged in international rather than just domestic production and distribution) are scattered all over the map. For example, Tilray is in British Columbia. This gives the company the unprecedented ability, via its online portal and information website, Leafly, to engage in direct sales to both patients (via online sales) and recreational users from its home base.

How this will shape regional sales figures once the rec market actually starts is uncharted territory.Aurora is in a similar situation as it is situated in Alberta.

Canopy is headquartered in Ontario, but has grow sites across the country, giving it wide market access, and has just been picked as one of four companies to begin recreational sales in Manitoba.

Aphria and MedReleaf headquarters are also both located in Ontario. But it is not necessarily where such producers are located which will determine market access. Ontario has opened the door to suppliers of all sizes, across the country.

Quebec, in contrast, has signed deals with Canopy, Aphria, Aurora, Tilray, MedReleaf and Hydropothecary with both Aurora and Hydropothecary expected to have large home-court advantage when it comes to branding. MYM Nutraceuticals, with a huge greenhouse in Weedon, Quebec, has now also signed the largest deal in Quebec (as of June). The company represents one of Canada’s largest greenhouses.

Prince Edward Island and Brunswick have followed a bit of a hybrid model, signing deals with both small local players and the larger national companies.

The interesting twist to the Canadian medical market (that does not exist in Europe for example) is that all licensed producers are allowed to sell directly to patients online. How this will shape regional sales figures once the rec market actually starts is uncharted territory.

Ontario, with 40% of the country’s population and home to more than half of Canada’s registered producers, is slated to become the country’s largest recreational market.

British Columbia, in contrast, is developing as a place where mom and pops can still thrive.

September 11, 2018

LabVantage Launches Cannabis-Specific LIMS

By Aaron G. Biros

1 Comment

LabVantage Solutions, known in other testing industries as a leader in laboratory information management systems (LIMS), has launched their own cannabis-specific LIMS. Unveiled at the Cannabis Science Conference in Portland, OR, the purpose-built software is designed specifically for cannabis testing and certification.

Here are a few key highlights of their system, taken from the press release:

Available through perpetual licensing or SaaS
One platform for all tests, instruments, sample information, and results data, with option to embed ELN, LES, and other modules
Registers sample requests, including a portal for remote requests from growers and distributors
Fully audited sample lifecycle and audit trail
Certificates of Analysis customized for local regulatory requirements
Includes American Herbal Pharmacopoeia® tests for Cannabis Inforescense.

Bob Voelkner, vice president of sales and marketing

LabVantage says their system can support ISO/IEC 17025 compliance, ISO 9001:2015, 21 CFR Part 11 and Annex 11 and GLPs as well. According to Bob Voelkner, vice president of sales and marketing, it has a very open architecture as well as web services technology, which allows for integration with METRC and other traceability software platforms. “We know the testing methodologies these labs use, so the customer doesn’t have to create that from scratch,” says Voelkner. “This is meant to be out of the box and ready-to-use, so the customer can get up and running with minimal lag time.” LabVantage has actually been a provider of LIMS solutions for over 30 years and they serve a broad range of lab types.

A screenshot showing the details collected in a harvest lot

Voelkner says they’ve been working with clients at cannabis labs over the past few years to configure their LIMS for this space specifically. “The lab managers can modify workflows on their own without having to write code,” says Voelkner. “We have a well-established solution with a good track record, that’s been around for a while and is proven. Some other players that are brand new to the space may be new to LIMS and that may not be a good thing. We are a market leader in the global LIMS space with a proven product that is very well established and very powerful.” Voelkner adds that lab managers get to own their data, not LabVantage. “You own the data. It is your database and it is proprietary to you. It is yours to use as you see fit.”

Lab managers have the option to configure the system to adapt to new compliance issues themselves, or work with the LabVantage professional services team to build it out further. “This particular space is new and emerging, it is pretty dynamic — we see a lot of change happening,” says Voelkner. “We believe this space needs a highly flexible platform and this is a proven technology solution with a lot of configurability built into it.”

September 10, 2018

How to Vet Suppliers in Cannabis Product Manufacturing

By Amy Davison

1 Comment

The quality of your edible cannabis product can only be as reliable as the components that comprise it. The three types of components include active ingredients (such as CBD oil), packaging components (such as the bottles that hold finished product) and inactive ingredients (such as coconut oil). When evaluating a potential supplier for these three areas, a risk-based method follows a vendor selection process that highlights critical ingredients and also adequately assesses excipients. With this approach, the vetting process for a supplier is based on the impact the potential ingredient or component will have on the quality and purity of the finished product.

Choose only those suppliers who can provide certification that the packaging components are food-grade or food-safeThere are three basic categories to guide vendor assessment. Is the supplier providing 1) a packaging component with product contact, 2) an excipient, or inactive ingredient, or 3) the active ingredient? Regardless of the category, due to the factious nature of cannabis, it is important to first verify with a vendor that it will sell its products to a company in the cannabis industry. Once that is determined, the evaluation process may begin.

Packaging Components

Sourcing validation is a critical initial step in the production process. (image credit: Lucy Beaugard)

Packaging components, such as bottles and caps, are considered primary packaging because they have direct contact with the finished product. Suppliers of the primary packaging must be able to provide assurance that their goods do not contain additives that are harmful to consumers. Therefore, choose only those suppliers who can provide certification that the packaging components are food-grade or food-safe. Reputable vendors will also be able to provide a certificate of compliance, also known as a certificate of conformance, which states that the component meets specifications required for that part. Many cannabis regulations require finished products to be sold in child-resistant packaging, so the supplier will need to provide child-resistant certification for the packaging components, if applicable.

Excipients

Excipients are ingredients that are added to a product for the purposes of streamlining the manufacturing process and enhancing physical characteristics such as taste and color. Some examples could include coconut oil, starch and alcohol. Though they do not have the same critical nature as active ingredients, their potential risk to a finished product is generally greater than that of a packaging component. As such, there are additional factors to consider for an excipient vendor. Verify with the supplier that it can provide the following documentation. While governing regulations may not require some information, the data included in these documents are important to ensure the quality of your finished product.

Certificate of Analysis (or, certificate of conformance), for each lot of material. The information on a certificate, including the tests performed, specifications and test results must be sufficient to determine if the material is acceptable for use in the product.
Allergen Statement. This statement is important to accurately include or disclaim allergens on the finished product label.
Residual Solvent Statement. Solvents are commonly used to bolster the manufacturing process for a material. In order to maintain acceptable levels of residual solvents in a final product, it is necessary to also consider the toxicity and level of each solvent in the raw material.
Heavy Metals Certification. Since metals pose a risk to consumer safety, it is important to know what amounts, if any, are being contributed to your product by raw materials.

Because changes in an excipient can impact your finished product, make every attempt to obtain a commitment from a supplier to notify you if changes are made to the excipient’s specifications.

Active Ingredients

Cannabis oil is the ingredient that, when the edible cannabis product is consumed, is biologically “active.” Thus, it is considered to be the active ingredient in cannabis products. Since cannabis oil has a direct impact on the quality of a product, it is critical that the oil supplier be appropriately evaluated. One of the main considerations for a cannabis oil supplier is whether the supplier is willing to host initial and periodic audits of its manufacturing facility. Such audits are crucial in assessing the capability of the vendor to comply with regulatory requirements and established procedures – can the supplier consistently provide quality material? The answer to this question is too important to risk for you and your customers.As anyone working in the industry has experienced, anything related to cannabis is placed under an unprecedented critical lens.

Additionally, verify the oil supplier will provide key documentation, such as that listed above for excipients, to support the quality and purity of the oil. And last but not least, ensure the information reported by the supplier is adequate to meet the requirements of your finished product.

Evaluation guidelines and criteria such as these should be added to standard operating procedures to ensure consistency and quality across all products. As anyone working in the industry has experienced, anything related to cannabis is placed under an unprecedented critical lens. The importance of consumer safety and bolstering industry integrity is paramount. Sourcing validation is a critical initial step in the production process that can directly impact a company’s success and longevity in the cannabis industry.

September 6, 2018

Basic Training for Employers and Employees in the Cannabis Industry

By Lindsay Engle

4 Comments

The cannabis industry is evolving as more states begin to legalize; as the legalization of cannabis grows, the industry will need more well-informed dispensaries and dispensary employees.

Unfortunately, there are employees in dispensaries without proper training and some are put in positions to recommend specific strains to patients that may not be accurate. Getting proper training is important, no matter which cannabis job you want to pursue.

More Training Is Needed

Currently, there are no national standards for training dispensary employees, there is not even a licensing code. Therefore, it is important for owners to investigate state laws and understand legal minimums for worker education.

There are states, like Massachusetts, which requires a $500 fee for employee registration. There are other states that require cannabis employees receive a certain number of education hours on specific topics, like patient confidentiality.

Overall, more than fifty percent of cannabis dispensary staff has reported receiving some type of formal training and only twenty percent of staff members have received medical cannabis training.

Dispensary staff should receive training on how and when to make appropriate suggestions to patients. Any successful dispensary owner will acknowledge that employee education pays off in reduced loss, increased sales and avoided fines. There are more benefits to employee training than just these and there are steps owners can take to ensure they are getting the most out of their business and employees.

Setting up a System

When a dispensary has protocols in place that show how the business operates, the company will have consistency and organization. No matter the task, all team members must follow specific procedural protocols.

Mostly, mistakes are made when steps are missed or misunderstood by new employees, but with proper and thorough training, this can be avoided. Owners should be investing in a POS software system that is straightforward; this will reduce training time and make it easier for new staff to be familiar with the system.Having budtenders that can educate and connect with the customers on a personal level is invaluable

Teaching budtenders to adopt a soft sell technique will be the most effective when it comes to increasing sales. Many customers seeking relief using cannabis are not going to respond to a hard sell technique, as this comes off pushy or aggressive.

There are going to be customers who are unsure of what products they want; theses customers will need guidance, and training employees to make suggestions based on what the customer is looking for is the best sales practice.

Having budtenders that can educate and connect with the customers on a personal level is invaluable; dispensaries that do this will have repeat customers.

More States Legalizing, More Dispensaries and More Employees

As the United States heads towards cannabis legalization, slowly but surely, we need to be prepared to train workers. When you have a dispensary that you have already spent millions of dollars on the application process, you don’t have time to be messing around with employees that are not serious.

There are many different options anyone in the cannabis industry can seek out to educate themselves more in the business.Those distributing cannabis must take their duties as seriously as pharmaceutical technicians, because in a sense that is what they are doing. They are giving information on the prescription or drug to a customer that is using it for an intended a purpose.

Cannabis users come in many different ages and aliments. It is important for budtenders and dispensary owners to understand the backgrounds of each customer to increase their up-sale potential.

While compassion isn’t something you can learn online or in a classroom, it is always a good idea to remind others to be compassionate. The budtender that asks the right questions, takes time with each patient to care for them and goes over practical products for the client will be the budtender with the most sales revenue.

Higher Learning

There are many different options anyone in the cannabis industry can seek out to educate themselves more in the business.

Some platforms are available online and are filled with important content that can teach you about different aspects of the cannabis plant and industry. These classes can prepare employees or owners for success.The most important training will be the training of patients

There are courses that can educate you in how to cook and healing with cannabis. You can also learn about laws on a state-by-state basis when you are enrolled in a cannabis-training program. The cannabis industry is large and growing; entrepreneurs, lawyers and caregivers can learn about the growing movement and expand their knowledge on this topic.

Patient Training

The most important training will be the training of patients, who will be navigating between the world of western medication and the new option of medicinal cannabis.

There are obviously many positive things that will come from the legalization of cannabis, one of the biggest being more options for pain management patients. There is a misconception that people are using medicinal cannabis as an excuse to get high; however, many patients in most states are over the age of 50.

In 2016, it was estimated that 650,000 Americans were using cannabis in compliance with the laws of their state. As legalization grows to a national level, we are going to need to be educating patients.

It is important for citizens to talk to their doctors about methods they believe will work best for them. It is necessary to communicate strains that are ineffective or unsatisfying. Keeping a cannabis journal is a good way to know what dose and strain you benefit from the most.

There are many ways patients can be educated in the cannabis industry, and dispensaries that encourage patient education will grow customer loyalty. The person who knows the facts and is confident in their information will be more successful than the person who guesses.

Be sure you, your staff and your customers know the laws, strains and can accurately answer questions about cannabis.

September 5, 2018

Soapbox

Distillation Of Your Cannabis Extract: Ignorance Is Not Bliss

By Dr. Edward F. Askew

2 Comments

In a previous article I discussed the elephant in the room for clients of laboratory services- the possibility of errors, inaccurate testing and dishonesty.

Now, I will explain how the current “smoke and mirrors” of distillation claims are impacting the cannabis industry in the recreational and medical areas. We have all heard the saying, “ignorance is bliss.” But, the ignorance of how distillation really works is creating misinformation and misleading consumers.

That is, just because a cannabis extract has been distilled, doesn’t mean it is safer.There have been reports of people claiming that “Distilled cannabis productsthat are Category 2 distillate are pesticide free and phosphate free, while Category 1 has pesticides and phosphates, but within acceptable limits”

The problem is that these claims of Category 1 and Category 2 cannot be proven just by saying they are distilled. Ignorance of the physical chemistry rules of distillation will lead to increased concentrations of pesticides and other organic contaminants in the supposedly purified cannabis distillate. That is, just because a cannabis extract has been distilled, doesn’t mean it is safer.

So, let’s look at a basic physical chemistry explanation of the cannabis distillation process.

First off, you must have an extract to distill. This extract is produced by butane, carbon dioxide or ethanol extraction of cannabis botanical raw material. This extract is a tarry or waxy solid. It contains cannabinoids, terpenes and other botanical chemicals. It will also contain pesticides, organic chemicals and inorganic chemicals present in the raw material. The extraction process will concentrate all of these chemical compounds in the final extract.
Now you are ready to distill the extract. The extract is transferred to the vacuum distillation vessel. Vacuum distillation is typically used so as to prevent the decomposition of the cannabinoid products by thermal reactions or oxidation. Under a vacuum, the cannabinoids turn into a vapor at a lower temperature and oxygen is limited.
Part of the vacuum distillation apparatus is the distillation column. The dimensions of this column (length and width) along with the packing or design (theoretical plates) will determine the efficiency of distillation separation of each chemical compound. What this means is that the more theoretical plates in a column, the purer the chemical compound in the distillate. (e.g. Vigreux column = 2-5 theoretical plates, Oldershaw column = 10-15 plates, Sieve plate column = any number you can pay for).
The temperature and vacuum controls must be adjustable and accurate for all parts of the distillation apparatus. Failure to control the temperature and vacuum on any part to the apparatus will lead to:
- Thermal destruction of the distillate
- Oxidation of the distillate
- Impure distillate

Now, you can see that a proper distillation apparatus is not something you throw together from a high school chemistry lab. But just having the proper equipment will not produce a pure cannabis product. The physical chemistry that takes place in any distillation is the percentage a chemical compound that occurs in the vapor phase compared to the percentage in liquid phase.So, how can you produce a cannabis distillate that is clean and pure?

For example, let’s look at whiskey distillation. In a simple pot still, alcohol is distilled over with some water to produce a mixture that is 25%-30% ethanol. Transferring this distillate to an additional series of pot stills concentrates this alcohol solution to a higher concentration of 85%-90% ethanol. So, each pot still is like a single theoretical plate in a distillation column.

But, if there are any chemical compounds that are soluble in the vapor produced, they will also be carried over with the vapor during distillation. This means that pesticides or other contaminants that are present in the cannabis extract can be carried over during distillation!

So, how can you produce a cannabis distillate that is clean and pure?

Produce a cannabis extract that has lower concentrations of bad chemicals. Since a lot of the cannabis extracts available for distillation are coming from grey-black market cannabis, the chances of contamination are high. So, the first thing to do is to set up an extraction cleanup procedure.
- An example of this is to wash the raw extract to remove inorganic phosphates. Then recrystallize the washed extract to remove some of the pesticides.
Make sure that the distillation apparatus is set up to have proper temperature and vacuum controls. This will limit production of cannabis decomposition products in the final distillate.
Make sure your distillation apparatus has more than enough theoretical plates. This will make sure that your cannabis distillate has the purity needed.
Finally, make sure that the staff that operates the cannabis distillation processes are well trained and have the experience and knowledge to understand their work.

Inexperienced or under-trained individuals will produce inferior and contaminated product. Additional information of extract cleanup and effective vacuum distillation can be obtained by contacting the author.

Flag_of_the_People's_Republic_of_China.svg

September 5, 2018

The Awakening Green Giant: China and Cannabis

By Marguerite Arnold

2 Comments

There are many ironies along the path towards global cannabis legalization. Too many to count. But surely one of the oddest was always going to be the reacceptance and relegalization of cannabis in China.

The path so far has been, at a minimum, tortured.

Ritualistic, religious, and medical use of cannabis is mentioned in Chinese texts as early as 3,000 years B.C. and medical literature for the last 2,000 years. Fast forward through Imperial dynasties, the western Age of Empire and exploitation, a cultural and political revolution and two world wars, and it took China until 1985 to actually declare cannabis “illegal.”

During the 19^thCentury British occupation, the majority Muslim Xinjang region of the country was a major cannabis producer (and exporter) to British India.This was done legally and under tariff until 1934 when the communist government cut off legal trade.

Currently,punishment for possession yields10-15 days jail time and a 2,000-yuan (approximately $300) fine. Illegal sales, however, carry the death penalty. Last year, China executed 10 people convicted of drug trafficking in a public space to send a strong statement about the launch of a new anti-drug campaign. It certainly sent a message.

But to Westerners, in particular, a highly confusing one.

So where is the “market?” And how and where is cannabis being slowly reintroduced to the country in the age of global reform?In 2003, they issued regulations to normalize the industry.

Hemp Is Widely Farmed

Farmers in the northerly province of Heilongjiang province, near Russia, are producing hemp legally these days – bound for industrial, medical and edible commercial use. The crop is highly profitable for farmers – bringing in about USD $1,500 per acre.This is far more than other crops like corn. Chinese authorities had, until earlier this century, turned a blind eye to its production. In 2003, they issued regulations to normalize the industry.

This production region also accounts for half of all farmland currently under legal hemp production, globally.

That is not a typo.

More Than Half Of Global Cannabis Patents Are Chinese

During the 20^thCentury,as cannabis reform moved on, not to mention western medical knowledge expanded about the plant, no surprise, the Chinese government began to lend support to a burgeoning industry and medical research. That also began surprisingly early. During the Chinese involvement in the Vietnam War during the 1970’s, the government needed a source of cheap clothing material for soldiers. They also needed cheap, accessible medicines with strong anti-bacterial properties, particularly in the humid jungle.

Given the highly politicized nature of the plant itself, not to mention current geopolitical developments shaping the global industry, Chinese exports are likely to stir a global conversation.Approximately half of the world’s 600 cannabis patents are now held in China, rivalling the potential of Israel on both the cannabinoid medicine and medical device front.

These days, there is a greater appreciation than ever for “traditional” Chinese medicine,long stigmatized by Western approaches to the same, far from China. The discovery of the so-called “endocannabinoid system” of the body by Israeli scientists at the turn of the century also supports this sea change. Including not only the use of cannabisbut other natural herbs and procedures like acupuncture to stimulate it.

The Chinese domestic medical cannabis trade, in other words, is ready to take off in the world’s largest greying population. The horse has, obviously, left the barn in the West.

But what does all this mean for non-Chinese competitors not only in Chinabut outside of it, as the drug heads for export crop status?

Cannabis Trade Wars Are In The Offing

Given the highly politicized nature of the plant itself, not to mention current geopolitical developments shaping the global industry, Chinese exports are likely to stir a global conversation.

President Donald Trump’s administration, it should be remembered, allowed a British CBD import to enter the U.S. pharmaceutical market this summer (while still banning all U.S. producers from entering the same thanks to delays on rescheduling domestically). It is not an unreasonable prediction to make, certainly after Trump also struck a deal with Israeli President Benjamin Netanyahu to delay the date of Israeli medical cannabis to the rest of the world in exchange for political support in moving the nation’s capital from Tel Aviv to Jerusalem.

A U.S. “ban” on Chinese-sourced cannabis would be one of the most natural responses in the world for the current American administration, which has not only used the cannabis trade card before (Israel, UK) but has yet to move on rescheduling the drug at home.

What To Expect If Considering Importing

Tread carefully. While Europe (at least to North Americans) has its eccentric quirks when it comes to international business, the situation in China is far different.Tread carefully, and find local partners where possible.

Beyond appalling penalties for getting the paperwork (or etc.) wrong, there aremany differences in business, medical and even broader culture that are completely foreign to Westerners (in particular).

Tread carefully, and find local partners where possible. Where to meet Chinese partners?

Chinese investors are beginning to enter particularly European markets via conferences. In the past several years, while they are still a trickle, Chinese doctors, investorsandscientists have begun appearing in the West. Particularly in more medically oriented forums in Europe.

August 23, 2018

From The Lab

Quality Plans for Lab Services: Managing Risks as a Grower, Processor or Dispensary, Part 5

By Dr. Edward F. Askew

No Comments

Protection in the Court of Public Opinion

In the last four articles, I have outlined areas that impact your operations as they apply to laboratory quality programs. But this article will take a different path. It will focus on protecting your crop and brand along with any business that utilizes your crop, such as dispensaries or edible manufactures in the court of public opinion.

Now, the elephant in the room for cannabis companies is the difference between rules written by the state and their enforcement by the state. There are many anecdotal stories out there that can be used as case studies in identifying ways to protect your brand. Remember, consumers and the media caught them, not the regulators.

Cheating in the cannabis industry: growers, dispensaries, edibles manufactures, etc. This includes:

Finding laboratories that will produce results that the client wants (higher potency numbers)
Not testing for a particular contaminant that may be present in the cannabis product.
Selling failed crops on the gray or black market.
Claiming to regulators that the state rules are unclear and cannot be followed (e.g. So, give me another chance, officer)

So why should you be worried? Because, even if the state where you operate fails to enforce its own rules, the final end-user of your product will hold you accountable! If you produce any cannabis product and fail to consider these end-users, you will be found out in the court of public opinion by either the media or by the even more effective word of mouth (e.g. Social Media).

So, let’s take a look at some recent examples of these problems:

Each of these reports lists contamination by microbial stains or pesticides as being rampant within the California market whose products are used for medical or recreational use. Just imagine the monetary losses these cannabis businesses faced for their recalled cannabis product when they got caught. Remember, consumers and the media caught them, not the regulators.Institute a quality program in your business immediately.

How can you be caught? There are many different ways:

Consumer complaints to the media
Secret shopper campaigns (more to come on that in the next article)
Media investigations
Social media campaigns

What are the effects on your business? Product recalls such as these two to hit the California market recently.

So, what should you do to produce an acceptable product and provide reasonable protection to your cannabis business? Institute a quality program in your business immediately. This quality program will include areas of quality assurance and quality control for at least these areas.

Growing
Processing or formulating
Shipping
Dispensing
Security
Training of staff
Laboratory services

Setting up and supporting these programs requires that your upper management impose both a rigorous training program and make employee compliance mandatory. Otherwise, your business will have an unreasonable risk of failure in the future.

Further information on preparing and instituting these types of quality assurance and quality control programs within your business can be found at the author’s website.