Tag Archives: consumer

The Brand Marketing Byte

Cannabis Brands in Culture: Tyson Ranch

By Cannabis Industry Journal Staff
1 Comment

The Brand Marketing Byte showcases highlights from Pioneer Intelligence’s Cannabis Brand Marketing Snapshots, featuring data-led case studies covering marketing and business development activities of U.S. licensed cannabis companies.

Here is a data-led, shallow dive on the California brand, Tyson Ranch:

Tyson Ranch – Cannabis Brands in Culture

To just about every American, Mike Tyson is a household name, even after retiring from boxing for more than 15 years. For the uninitiated, Mike Tyson founded Tyson Ranch (TR), his cannabis licensing and branding company, about two years ago. The brand’s flower, extracts and infused products are distributed to dozens of dispensaries throughout California.

Last year, the brand developed plans for a boutique luxury resort outside of Palm Springs. About six months ago, the brand expanded its footprint to another state, with TR cannabis products showing up on dispensary shelves in Nevada.

Last week, Tyson Ranch gained some media attention, but this time not by anything Tyson himself had done. The Simpsons aired a cannabis-focused episode where they featured a character based on Tyson, Drederick Tatum, a former boxer who now resides in Springfield, the fictitious setting of the show. The episode’s storyline gives a major nod to the TR brand with a mention of an upscale luxury resort dedicated to cannabis.

That earned media attention helped Tyson Ranch soar in Pioneer’s weekly index of the hottest U.S. cannabis brands, earning TR the #2 spot. This also ends March with a bang for TR, climbing from the 40th position overall in February to the 28th presently.

Soapbox

Home Office HACCP During COVID-19

By Nathan Libbey
1 Comment

With much of the world shutting down and many of us forced to take refuge behind our own doors, we have some time to reflect on what actions led to this. There has been, in my opinion, a clear disconnect between our actions and health outcomes. We need to bridge this gap; We now have a moment to build that bridge. We can start by reassessing our endpoint measurement of health and disease and focusing on what leading measures will impact our lagging results. Think of it as HACCP-lite or home office HACCP. Small changes in the way we think and behave can lead to significant change.

Lagging measures – Lagging measures make great headlines and typically measure an outcome. These are easily quantifiable and therefore receive a good deal of the focus.

Leading measures – Leading measures are inputs that happen during the process and in advance of an outcome.  Leading measures are often difficult to quantify.

This week, Nathan started a “Germ Jar” activity with his kids to track washing.

We are currently focused on the lagging measures for a communicable disease, COVID-19. Illness and death numbers stemming from the pandemic continue to rise, as is expected with more available testing. It is easy for us to dwell on these numbers as they climb and dominate the news. A study in Australia last decade indicated that just over 1% of those experiencing flu like symptoms sought treatment and eventually got tested. I’m not going to use the tip of the iceberg cliché, but there it is. Focusing on the rapidly rising rates of COVID may be easy to do, but it won’t help our future selves.

What we should be doing during this time, however, is looking at our own leading behaviors and how changing them can help prevent this situation from reoccurring.

Here are some inputs we can rethink:

  • Hand washing – The average American uses the restroom 6-7 times per day. This week I started a “Germ Jar” activity with my kids (spring break week!) to track washing. If we wash our hands every time we use the restroom and every time we eat, that’s roughly 10X per day. Our leading indicator of household health, then, is 10 hand washes per day. This principle can, and should be applied to workplaces, including schools, airports and hospitals. What if we had mandatory handwashing prior to airport security and boarding? My estimation is that data would indicate a sharp decline in illness and transmission rates.
  • Disinfecting/Sanitizing – Similar to hand washing, cleaning surfaces serves as a vital indicator of future health. Examples, such as this District in Freeport, Il, indicate that increasing frequency of disinfecting can lead to a dramatic decrease in numbers sick. In my new office setting, we have set a goal via the Germ Jar of 3 times per day wiping down high touch surfaces. As we reenter close-proximity society, we need to have a better understanding of what high touch surfaces are, both for those who are tasked to clean them, as well as those that are doing the touching. Reduction of touches coupled with above washing behaviors post-touch can help prevent disease transmission.

    Nathan’s daughter adding to the Germ Jar
  • Monitoring – Lastly, we need to do a better job at monitoring ourselves and our environments. In my new office, we have enacted a temperature check every morning and night. If we practiced symptom reporting (coughing, sneezing, chills) and monitored temperature in other settings, such as offices and schools, could we start to see pockets of infection and trends? Taking it a step farther, while we invest a tremendous amount of time and money into protecting our food supply from foodborne illness, we rarely discuss preventive monitoring for other diseases, such as influenza and now COVID-19. Technologies are rapidly coming available that will allow us to perform quick diagnostics of both individuals and environments. If we were to monitor the air and surfaces of a school nurse’s office, would we find data that could prevent transmission of disease? Can we transfer HACCP-lite to additional (all) settings?

Over the next weeks and months, we are going to be inundated by the spike in COVID illnesses and deaths. During this time, it is on each of us to realize how our past behaviors led to the state we are in. When we return, viruses will not be absent from the world, our hospitals, schools, offices or our bodies. We can, starting now, begin to measure and change our leading behaviors and begin to shape a healthier future.

The Beginner’s Guide to Integrated Pest Management

By David Perkins
2 Comments

Formulating a Plan

In this article you will learn how to control pests and improve the health of your cannabis plants using integrated pest management, commonly referred to as IPM. This involves a multi-point strategy – there is no quick fix, nor is there one solution that will wipe out all your pest problems. Proper pest management requires patience, consistency and determination.

It is important to understand that not all pesticides are bad. While many are incredibly harmful not only to pests, but also humans, in this article I will educate you about some of the safer alternatives to traditional pesticides. It is possible to safely control unwanted pests in your cannabis garden without harming yourself, your employees or the natural habitat around you.

Every cultivation facility should have a well-thought-out plan for their pest management program. This program should account for the prevention, and if necessary, eradication of: spider mites, russet mites, fungus gnats, root aphids, thrips and caterpillars. These are just a few of the more common pests you’ll find in a cannabis garden. There could also be many other less commonly known bugs, so you have to be vigilant in looking closely at your plants, and the soil, at all times. Complete eradication of a targeted pest can be difficult. Once a pest has established itself, decimating or decreasing the population will require an aggressive regimen that includes spraying daily to control populations and prevent other pests from getting established.

Spraying or applying pesticides to the foliage of plants isn’t the only way to control or eradicate pest populations. There are many other ways that you can minimize the spread of pests without the use of pesticides. In greenhouse and outdoor grows, growing specific types of plants around the cultivation area will attract both beneficial and predator bugs that will naturally control pest populations. Some plants that attract these bugs are: mint, peppers, and marigold. Beneficial and predator bugs, such as ladybugs, predator wasps and predator mites, can control unwanted pest populations in the area before they even have a chance to become a problem in your garden. Plants and flowers that attract bees, birds and insects will also create helpful bio- diversity, making it more difficult for the unwanted pests to thrive.

For indoor cultivation, it is imperative that you have your cultivation facility set up for a proper workflow. If you already have pests, you need to make sure you are not contaminating the rest of your facility when going from one area to the next. Make sure that you only go to contaminated areas at the very end of your day, and when you’re done working in that area, you must immediately exit the building. Do not ever walk back through the uncontaminated parts of your facility or the pests will spread quickly.

An aphid on a plant in a greenhouse

When most people think of pests in their cannabis garden they think of the more common varieties: spider mites, russet mites, aphids and thrips. However, there are also soil-dwelling pests that can exist, without your knowledge. These will decrease the health and vigor of your plants, without you even knowing they’re there, if you’re not careful to check for them. Some of the soil dwelling pests that plague cannabis plants are: root aphids, fungus gnat larvae and grubs. It is just as important to control the pests below the soil, feeding on your roots, as it is to control the pests that feed above soil on your plants.

Maintaining healthy plants is essential to controlling pest populations, both on the foliage and below the soil. Healthy plants will have an easier time fighting off pests than unhealthy plants. Plants have immune systems just like humans, and the stronger the plant’s immune system, the more likely it will be able to ward off pests and diseases. Allowing a plant to reach its full potential, by minimizing pests, means your plants will also have a better quality, smell and flavor, not to mention a bigger yield.

Worker Safety, Regulation and REI times

The application of pesticides requires certification from the state agricultural department. In certain situations, depending on the type of pesticide and method of application, a license may even be required. The application of pesticides without proper certification is against the law. Applying pesticides in a manner that is not in accordance with the label and instructions is also a violation of law.

The proper personal protective equipment (PPE) is required for anybody handling, mixing or applying pesticides. Employees can be a liability to your company if they are applying pesticides improperly. Make sure you and your entire staff are well educated about pesticide use requirements and limitations, prior to usage, and that only a properly certified person is handling the mixing and application at your facility.

The author, David Perkins, In his greenhouse after using insect killing soap.

After a pesticide is applied, you must abide by the re-entry interval (REI). This is the required time period limiting all workers from re-entry into areas where pesticides have been applied. This time period will vary depending on the type of pesticide used and the method of application. In some instances, pesticides applied in the last 30 days may require employee training before work can be done in those areas.

The misuse of or improper handling of pesticides is not only unlawful and dangerous to human health, but can also cause environmental damage to waterways and wildlife. The direct effects of pesticides on wildlife include acute poisoning, immunotoxicity, endocrine disruption, reproductive failure, altered morphology and growth rates and changes in behavior. Pesticides can indirectly impact wildlife through reduction of food resources and refuses, starvation due to decreased prey availability, hypothermia and secondary poisoning. Section 1602 of the California Fish and Game Code governs requirements for permitting of any project where pesticides will be used, and strictly regulates the disposal of all waste and run-off. It is imperative to know the regulations and to abide by them, or heavy fines will ensue!

Using Pesticides in a Regulated Market

Knowing which pesticides you can’t use, to avoid failing mandatory state testing, is just as important as knowing which ones you can use safely to pass required testing. Most states with regulated markets have strict limitations on the pesticides that can be used in cannabis cultivation. Pesticide use in the cultivation of cannabis is the most strictly regulated in the agriculture industry; the pesticides allowed for use in cannabis cultivation are far more limited than any other crop.

Photo: Michelle Tribe, Flickr

Just because a product is certified organic does not mean that it can be used, or that it is safe to be consumed or ingested. Oftentimes when cannabis flower alone is tested it will not fail or show a detectable amount of pesticides or heavy metals. However, when that flower is turned into concentrates, banned substances are then detected in testing, leading to test failures.

Cannabis cultivation facilities that are located on land that was previously used for conventional agriculture, or located near vineyards or other agricultural crops that are heavily sprayed with harmful pesticides, run a very high-risk failing testing. This is because of either spray drift from nearby agriculture, or residual pesticides and heavy metals left in the soil from previous crops that were using pesticides banned for cannabis cultivation. Accordingly, if you’re going to be growing outdoors or in a greenhouse, it is imperative that you get a soil and water test prior to cultivation, so you can determine if there is any potential for test failures due to pesticides or heavy metals in the soil or water in that area. 

Proper Application – Using the Right Tools in the Right Way at the Right Time

One of the most important factors in pest management is proper identification of pests and proper application and coverage of pesticides. It does not require an entomology degree to identify insects, these days there is a lot of information online that can help you identify cannabis pests. Proper identification of insects can make the difference between success and failure. With a good eye and a microscope, if you do your research, you can control most insects in your garden.

In order to control pests in your garden you must get proper coverage of the foliage of the plant when you are applying pesticides. There are different types of equipment that are commonly used to apply pesticides in cannabis cultivation: backpack sprayers, foggers, and airless paint sprayers are the most common. An alternative method involves using an automated dosing system such as a dosatron, which injects fertilizer or pesticides at a specific ratio into your water lines, allowing you to use only the exact amount of pesticide you need. That way you avoid wasting money on unused pesticides. It is also safer for employees because it minimizes employee exposure, since there is no mixing required, and it allows for a large volume to be sprayed, without refilling a tank or a backpack sprayer.

No matter what you are using you must ensure you get the proper coverage on your plants in order to control pests. The temperature and humidity of your cultivation area, as well as the PH and temperature of the pesticide solution, all factor into the success of your IPM. For example, PFR 97 needs to be applied at a higher humidity range, around 70% to be most effective. In some areas this is not possible so repeated applications may be required to ensure the application is effective. A high PH or alkaline PH can cause alkaline hydrolysis which will make your pesticide solution less effective and will dictate how long your pesticides remain effective after they are mixed. It is therefore important to use your pesticide solution as soon as you make it; don’t let it sit around for long periods of time before use or it will be less effective.

In cannabis cultivation there are two different primary growth cycles: vegetative and flower. These cycles require different IPM strategies. In general, during the flowering cycle, pesticides should not be applied after the second week, with some limited exceptions i.e. for outdoor cultivation there is a longer window to spray since the flower set takes longer than a plant being grown inside, or in a light deprivation greenhouse, where there is a 12/12 flowering cycle.

Starting with an immaculate vegetation room is crucial to maintaining pest and mold free plants in the flowering cycle.

For the vegetative (non-flowering) cycle, a strict rotation of foliage spray applications targeting not only pests, but also molds and pathogens, will be necessary to avoid a quick onset of infestation. Starting with an immaculate vegetation room is crucial to maintaining pest and mold free plants in the flowering cycle. Preventative sprays that are safe for use include: safer soap (contact kill) for soft bodied chewing insects; Regalia (biological control) for powdery mildew; and PFR 97 (biological control) for soft bodied chewing insects. It is also helpful to spray kelp, which strengthens the cell walls of plants, making the plant healthier, and thus enabling the plant to better defend itself from pests and diseases. Also, Bacillus thuringiensis (Bt) is useful to prevent or kill caterpillars.

The best way to control a pest infestation in the flowering cycle is at the very beginning on day one. You must start aggressively, with a three-way control consisting of a contact kill and preventative during days 1-14; preventative and biological control during days 10-18; and then release predator bugs on day 25, for optimal results. Knocking back the population with an effective contact kill pesticide early on is essential to ultimately lowering populations throughout the grow cycle, so that you can spray a biological control to preclude them from returning, before you release the predatory bugs at the end of the cycle.

Biological controls can take anywhere from 3 to 10 days before they are effective. Biological pesticides are selected strains of bacteria or fungus. When the plant tissue is eaten by a targeted pest, the bacteria kills the pest from the inside providing control without having to spray pesticides repeatedly. Predator bugs are the last line of defense, used in late flowering. They can be used indoors, outdoors and in greenhouses. An example of a common predator bug is Amblyseius californicus used to control low populations of spider mites, but there are many different varieties and they are specific depending on the type of pest population you seek to control.

A common concern with the use of predatory bugs, is whether they will be present when the flowers are harvested. However, if there is no food for the bugs (i.e. pests) the predator bugs will leave in search of food elsewhere. Further, indoor predator bugs are usually very small in size and difficult to see to an untrained eye. It is very unlikely to see any signs of predator bugs near the end of the flowering cycle, or in the finished flower product. Even when using bigger predator bugs, the bugs will leave the plants when harvested and dried.

Having pests can be very stressful. It is not uncommon to have bugs, pests, rodents, animals and birds cause damage in cannabis gardens. Making an informed decision based on science and not on unproven assumptions can determine how successful you are at pest management. There are many factors that go into pest management and no one situation is the same. You must be dedicated and consistent; pest management never stops. You will always have something ready to invade your garden. Prepare, plan, prevent and repeat!

CARES Act – Stimulus Package Won’t Aid the Cannabis Industry

By Steve Levine, Megan Herr
3 Comments

On Wednesday, March 25, the United States Senate approved an estimated $2-trillion stimulus package in response to the economic impact of the COVID-19 outbreak. The legislation, formally known as the “Coronavirus Aid, Relief, and Economic Security Act” (or the CARES Act), was approved by the Senate 96-0 following days of negotiations. One of the most highly anticipated provisions of the CARES Act, the “recovery rebates” for individuals, will provide a one-time cash payment up to $1,200 per qualifying individual ($2,400 in the case of eligible individuals filing a joint return) plus an additional $500 for qualifying children (§6428.2020(a)). The CARES Act, which remains subject to House approval, also prescribes an additional $500 billon in corporate aid, $100 billion to health-care providers, $150 billion to state and local governments and $349 billion in small business loans in an effort to provide continued employment and stabilize the economy. The legislation further provides billions of dollars in debt relief on existing loans.

CARES Act – Paycheck Protection Program 

Under the CARES Act, small businesses who participate in the “Paycheck Protection Program” can receive loans to cover payroll expenses, group health care benefits, employee salaries, interest on mortgage obligations, rent, and utilities (§1102(F)(i)). To qualify for these small business loans, businesses must employ 500 employees or less, including all full-time and part-time employees (§1102(D)). Eligible recipients must also submit the following as part of their loan application: (i) documentation verifying the number of full-time equivalent employees on payroll and applicable pay rates; (ii) documentation verifying payments on covered mortgage obligations, payments on covered lease obligations, and covered utility payments; and (iii) a certification that the documentation presented is true and the amounts requested will be used to retain employees and make necessary payments (§1106(e)). The CARES Act delegates authority to depository institutions, insured credit unions, institutions of the Farm Credit System and other lenders to provide loans under this program (§1109(b)). The Treasury Department will be tasked with establishing all interest rates, loan maturity dates, and all other necessary terms and conditions. Prior to issuing these loans, lenders will consider whether the business (i) was in operation as of February 15, 2020, (ii) had employees for whom the business paid salaries and payroll, or (iii) aid independent contractors as reported on a Form 1099-MISC (§1102(F)(ii)(II)).

What Does This Mean for Cannabis Businesses?

Due to the continued Schedule I status of cannabis (excluding hemp) under the Controlled Substances Act (CSA), cannabis businesses are not eligible to participate in the Paycheck Protection Program intended to keep “small businesses” afloat during the current economic crisis. Because federal law still prohibits banks from supporting marijuana businesses, financial institutions remain hesitant to service the industry, as anti-money laundering concerns and Bank Secrecy Act requirements (31 U.S.C. 5311 et seq.) are ever-present. As a result, even if cannabis businesses technically qualify to receive federal assistance under the Paycheck Protection Program, they will face an uphill battle in actually obtaining such loans.

Cannabis Businesses Are Also Precluded from “Disaster” Assistance

Moreover, the conflict between state and federal law continues to prevent cannabis business from receiving assistance from the U.S. Small Business Administration (SBA) under the Coronavirus Preparedness and Response Supplemental Appropriations Act (H.R. 6201). In light of the COVID-19 outbreak, the SBA revised its “Disaster Loan” process to provide low-interest “Disaster Loans” to eligible small businesses. To qualify for these loans, a state must submit documented business losses for at least five businesses per county. The problem, however, is that the SBA still refuses to assist state-legal cannabis businesses in equal need of small business loans. Specifically, in a 2018 Policy Notice, the SBA reaffirmed that cannabis businesses – and even some non “plant-touching” firms who service the cannabis industry – cannot receive aid in the form of federally backed loans, as “financial transactions involving a marijuana-related business would generally involve funds derived from illegal activity.” The 2018 Policy Notice clarified that the following business are ineligible to receive SBA loans:

(a) “Direct Marijuana Business” — a business that grows, produces, processes, distributes, or sells marijuana or marijuana products, edibles, or derivatives, regardless of the amount of such activity. This applies to personal use and medical use even if the business is legal under local or state law where the applicant business is or will be located.

 (b) “Indirect Marijuana Business” — a business that derived any of its gross revenue for the previous year (or, if a start-up, projects to derive any of its gross revenue for the next year) from sales to Direct Marijuana Businesses of products or services that could reasonably be determined to support the use, growth, enhancement or other development of marijuana. Examples include businesses that provide testing services, or sell grow lights or hydroponic equipment, to one or more Direct Marijuana Businesses. In addition, businesses that sell smoking devices, pipes, bongs, inhalants, or other products that may be used in connection with marijuana are ineligible if the products are primarily intended or designed for such use or if the business markets the products for such use.

More recently, the SBA provided further clarification that cannabis businesses are not entitled to receive a cut of the federal dollars being appropriated for disaster relief because of the CSA’s continued prohibition of the sale and distribution of cannabis. Last week, the SBA reiterated that:

“With the exception of businesses that produce or sell hemp and hemp-derived products [federally legalized under the 2018 Farm Bill], marijuana related businesses are not eligible for SBA-funded services.” (@SBAPacificNW)

Consequently, because of the continued Schedule I status of cannabis under federal law, cannabis businesses will not be entitled to receive Disaster Loans from the SBA, regardless of whether they qualify as a struggling small business.

Resolving the Issue

While the federal government has been considering legislation, such as SAFE Banking and the STATES Act, to create a more rational federal cannabis policy, neither of these bills are likely to pass any time soon given the current COVID-19 pandemic.

At the end of the day, until Congress passes some form of federal cannabis legalization, these small businesses will remain plagued by the inability to receive financial assistance, as evinced by the Paycheck Protection Program.

Best Practices for Workforce Reduction

By Conor Dale
No Comments

Due to anticipated contractions in the industry and concerns over a potential nationwide recession, cannabis industry employers may be planning on implementing large scale reduction in force (RIF) layoffs or employee furloughs to reduce payroll. While RIFs can provide business-saving cost reductions, they can subject an employer to substantial potential legal liability, including but not limited to class action lawsuits and enforcement actions from state and federal agencies. Understanding and addressing potential legal pitfalls before implementing an RIF can help in materially limiting an employer’s potential legal exposure.

Employers should first consider potential cost saving alternatives to implementing mass employee layoffs. Such steps can include reducing the salaries and/or work hours for current employees, temporarily freezing company operations for limited periods, or placing non-critical positions in a limited paid leave of absence at reduced wages. While each of these steps bear their own risks, they may assist in avoiding mass employee layoffs.

Next, federal law and the laws of certain states require employers to provide written notice to employees and local governments at least 60 days before implementing mass layoffs. For example, under the federal Work Adjustment and Retraining Notification (WARN) Act, an employer must generally provide a written notice to employees regarding an impending reduction in force when it: (1) permanently or temporarily shuts down a worksite which results in an employment loss of 50 or more employees; (2) lays off between 50 to 499 workers at a single worksite when such layoffs constitute at least 33% of the employer’s workforce; (3) lays off at least 500 employees within a 30 day period; (4) implements a wide scale temporary layoff of more than 6 months; or (5) reduces the work hours of 50 or more employees by at least 50% during each month of any six month period. Please note that the WARN Act aggregates layoffs over 90 days; thus, an employer conducting a series of smaller layoffs may still need to provide employees with a WARN notice. An employer who fails to provide a required notice could owe each impacted employee up to 60 days’ back pay, which includes but is not limited to the cost of potential employment benefits.

An employer should also take steps to limit potential discrimination claims based on an RIF. It is illegal for an employer to select an employee for layoff because of their protected characteristics, including but not limited to race, religion, gender or age. The primary defense to such a discrimination lawsuit is to prove the legitimate, nondiscriminatory reason for the layoff decision. As a result, employers are strongly encouraged to create a formal RIF plan which documents the legitimate reasons for layoff decisions. The RIF plan should expressly articulate the cost-saving grounds for the RIF and the goals to be achieved by its implementation; these grounds and goals should be the sole reason for any subsequent layoff decision.

Employers are strongly encouraged to consult with legal counsel before implementing an RIFFor example, an employer should identify all necessary positions and employee skills needed for a company’s current and future business operations in order to identify non-essential positions that may be subject to position eliminations or layoffs. Similarly, employers should create standards to select employees for a RIF when multiple employees hold the same or similar jobs. These standards commonly include considering employees’ education, skills, unique knowledge, previous job performance and seniority. Most importantly, an employer should make actual layoff decisions that are consistent with its articulated RIF plans; under both state and federal law, a termination decision that is inconsistent with or contradictory to the articulated reasons for a layoff decision may provide an employee with considerable evidence that that his or her termination was at least partly motivated by their protected characteristics.

Even when making and implementing a reduction in force plan based solely on legitimate business reasons, employers must be aware of the adverse impact those decisions have on certain groups of employees. It is illegal for an employer to implement policies and practices that are facially neutral but have an unintentional discriminatory effect on protected groups of employees if those policies and practices are not job related or required by business necessity. Before implementing an RIF, employers are strongly encouraged to perform a statistical analysis of the protected characteristics of individuals selected for layoffs to determine whether they are being selected for layoffs at a significantly higher rate than other employees. If an employer does discover that certain groups are being selected for layoffs at a disproportionate rate, an employer should review its layoff decisions to confirm that these decisions are in fact required by business necessity.

Finally, employers will commonly provide severance packages to laid off employees to assist in their transition to other employment. A key factor in these packages is an employee providing an employer with a full release of potential legal claims in exchange for a severance payment. Employers are strongly encouraged to ensure that they obtain full and complete legal releases in any severance agreements they provide. For example, under California law, an employee can only provide a full and complete release of legal claims when a separation agreement specifically cites and waives a specific provision of California’s civil code. Additionally, an employer cannot obtain a legal release of federal age discrimination claims when it offers a separation package to multiple employees over 40 during an RIF program unless it provides specific information regarding the job positions and ages of employees who were and were not selected for layoffs.

While a reduction in force layoff program may help ensure a business’ survival, employers are strongly encouraged to consult with legal counsel before implementing an RIF to detect and avoid potential future legal claims.

Custom Designed Packaging: Is it Right for Your Cannabis Product?

By Danielle Antos
1 Comment

There are numerous plastic bottle and closure manufacturers in the cannabis industry today. And, there is a significant quantity of common bottle and closure styles as well. Many companies manufacture the same or similar products as their competition. But what if you’re searching for something different? Something unique that no one else has? A plastic bottle that will make your cannabis product stand out from your competition. Where can you find that package that is truly “something special?” Something that will elevate your brand?

It doesn’t matter if your cannabis business is a start-up in its infancy or a mature company with an established loyal customer following, creating attention-grabbing packaging is essential to your success. The packaging is the all-important and critical first impression. While the primary function of any packaging is to contain, protect and market your cannabis products, your packaging is a reflection of your company in the eyes of the consumer. In many ways, the package is the product. Using creative plastic packaging is a great way to differentiate your cannabis products from those of your competitors.

Finding the right manufacturing partner is the first step. Look for a company that has custom design capabilities and understands your vision for the perfect cannabis packaging.

When is Custom Bottle Design the Right Choice?

Sometimes, an off-the-shelf stock bottle and closure will work just fine. But if you are introducing a brand-new product that is unique to the industry, or if you are using a new product to introduce the fresh new look of your brand, it makes sense to develop plastic packaging that is distinct and eye-catching. You want your brand and products to look special and stand out on the shelf. There could also be filling equipment, regulatory, labelling, light sensitivity or other packaging requirements you must address as well.

Start every custom cannabis bottle project with a trusted manufacturer who thoroughly understands how you want the plastic packaging to look and the specifications it must meet. Ensuring that these qualitative and quantitative details are discussed will lead to on-time, on-budget and on-target custom cannabis packaging solution.

Achieving the Look You Want

Depending on your requirements, there could be several solutions to achieving the special look and specifications of your custom packaging. Discuss all of the design options that meet the needs of your product with your manufacturing partner; they should help you decide on the best direction for your packaging.

Selecting the right materials for your custom plastic bottle and closure is a big part of the process. Select materials that will provide the necessary aesthetics, chemical resistance, light transmission, bottle capacity and weight requirement that will protect your product.

Your manufacturer should also be able to guide you through the production process: should the bottle be blow molded or injection molded? Should it be made on IBM (Injection Blow Molding) equipment or EBM (Extruded Blow Molding) equipment? Answering these questions will ensure that the plastic bottle will be made efficiently and to the correct specifications.

Flawless Closure Integration for Your Cannabis Packaging

Designing the bottle is important, but you must also consider what type of closure will work best. Both items must be engineered to work seamlessly with each other. If the closure doesn’t work properly with the bottle, it can compromise the product it contains. Closures must always seal perfectly to ensure the integrity of the product inside. They must also be designed to function efficiently and meet the requirements of your filling operation.

A detailed CAD drawing should be provided, outlining every critical dimension of your HDPE or PET bottle and plastic closure. The CAD drawing provides the direction needed to create the manufacturing mold for your custom design. It also serves as a reference check to ensure that the product is produced according to your specs.

Ensure Quality through the Manufacturing Process

Ensure that your packaging partner has quality checks in place throughout the manufacturing process. Error detection systems, random sampling and testing will safeguard 100% conformity. It’s also important that manufacturers adhere to cGMP best practices and certifications under a globally recognized accredited program. This represents their commitment to continuously improving manufacturing processes and quality systems. It also helps minimize waste and manufacturing errors while increasing productivity. Risk of product contamination and other errors will be alleviated, and product efficacy and shelf life expectancy will be met.

Responsive Customer Service and Support

Many packaging manufacturers claim to provide exceptional customer service, but few actually rise up to that level. This is an important aspect of your project and you need to know that your questions will be answered and that your producer will keep you informed of any changes. Knowing that you can trust your supplier allows you to concentrate on other aspects of your business, like growth and profitability.

Reinforce Your Brand with Customized Packaging

In today’s competitive cannabis market, it’s more important than ever to have your product stand out from the competition. Your brand should help build awareness and develop consumer loyalty. When you deliver a consistently reinforced message, consumers will instantly recognize your brand. This consistency is a key factor in encouraging consumers to purchase your product over the competition — even when they want to try something new. Consistency makes your brand feel more dependable and people gravitate towards things they trust.

Your brand consists of more than just your logo and company name. Your brand identifies who you are, what your company stands for and the integrity of your product. Customized cannabis packaging will reinforce your brand and attract consumers to your products. Take time to find the right cannabis packaging partner who can help differentiate your brand and products from your competitors with special, eye-catching plastic packaging.

Soapbox

Clean Grow Still Failing? Check for Endophytic Mold

By Bernie Lorenz, PhD
3 Comments

The journal Frontiers in Plant Science recently shared an important article from researchers at Simon Fraser University in British Columbia, highlighting the “Pathogens and Molds Affecting Production and Quality of Cannabis Sativa.”

As a chemist focused on the science of preventing and mitigating mold in greenhouse and indoor cannabis grow facilities, this piece was fascinating to me. Like many others, it details and explains prevalent mold like Penicillium, Cladosporium and Aspergillus – things I see in grows every day.

But wait, there’s more fungi

The research and resulting article also brought up another type of fungi – endophytic mold. Endophytic mold usually lives symbiotically with plants, or is at least beneficial for both plant and fungi.

But not always.

In the past, the industry has believed that damaging mold spores were found on the outside of the flower. When moved, that flower would release the spores and send them flying – often creating massive cross-contamination issues for indoor grows.

Hope Jones, PhD, CEO of Adivina & ECS

“While cannabis is an incredibly powerful plant in terms of its medicinal properties, it is unfortunately highly susceptible to many pest and pathogens,” says Hope Jones, PhD, CEO, Adivina & ECS. “And it is this susceptibility that is so challenging to many inexperienced or undisciplined grow operations.”

Now, however, we know that there’s another culprit to add to the list: the inner parts of the plant can also be a source of endophytic cross contamination and mold.

Since it grows inside of the plant, this fungus creates high spore counts that can cross contaminate from outside, into the flower.

Treating mold in a facility

Here’s the good news:

This seemingly bad news – that there’s a new fungus to worry about, and it is inside the flower – may actually help cannabis grows struggling with mold, and those who are following the proper protocols already.

A petri dish of mold growth from tested cannabis Photo credit: Steep Hill

Effective mitigation protocols can include things like treating HVAC systems, controlling humidity, using products like chlorine dioxide to treat irrigation lines, enforcing protective clothing and shoe covers for employees, reducing the amount of in-and-out for employees around grow rooms.

These are important upstream and environmentally-focused integrated pest management (IPM) programs that will usually keep facilities clean and relatively mold-free.

But if these programs are in place, and there’s still an issue, Endophytic fungi may be to blame.

If you are having ongoing mold issues but have ruled out cross-contamination and a facility without proper protocol, look to the mother plant.

“Small mistakes in agricultural practices are amplified with cannabis,” Dr. Jones continues. “And today’s propagation practices of traditional cloning add to this vulnerability. Cannabis is an annual plant and by keeping mothers in a perpetual state of vegetative growth for years, and taking repetitive cuttings produces clones in a highly stressed state. This stressed state diminishes genetic potential and weakens a plant’s ability to fight disease and pests.”

Testing for and addressing endophytic fungi

If these concerns are ringing a bell, remember, there is also a way to test for Endophytic mold.

Checking cuttings from suspected mother plants over a period of time is the best way to see if the Endophytic mold is present.

A section of the mother plant cutting is placed into a solution (for example, as outlined by the article, a very concentrated hypochlorite followed by 70% Ethanol) that will kill all of the microorganisms that are present on the surface of the plant tissues.

A large tissue culture facility run in the Sacramento area that produces millions of nut and fruit trees clones a year.

From there, an unadulterated dissection of the internal tissues can be extracted and cultured for quantification and identification of endophytic fungi.

“Tissue culture offers a form of genetic rebooting returning the plant to its natural genetic potential and thereby strengthening its natural ability to defend against environment assault,” says Dr. Jones. “It also allows the breeder to conduct pathogenic disease testing which provides the entire industry with a higher level of scientific certainty and analysis.”

If you find this mold inside of the mother plant, your facility’s mold problem could be a systemic issue, not an environmental one.

If you do find that Endophytic mold is causing issues, of course, you may have to destroy the mother plant.

This should not mean the end of a strain. Tissue culture on a cutting is an option that can eliminate the unwanted fungi and save the genetics. Using those genetics to regrow a mother will start fresh and avoid the intrinsic mold that was plaguing the strain prior.

Growing knowledge

The practice of checking mother plants for Endophytic mold is not yet commonplace in cannabis, but the hemp business is leading the way.

They’re testing to create very clean plants, so you don’t have issues during cultivation.

Major growers in the U.S. could save millions in lost harvests with mold mitigation. If your current IPM program isn’t doing the trick, you may want to follow in hemp’s footsteps and look inside the plant.

The Brand Marketing Byte

Introducing The Brand Marketing Byte

By Cannabis Industry Journal Staff
No Comments

Cannabis Industry Journal is pleased to announce our partnership with Pioneer Intelligence on this new series of articles. This is the first installment of The Brand Marketing Byte.

Pioneer Intelligence uses data to benchmark marketing performance of consumer-facing cannabis brands across three areas: social media, earned media and web-related activities. At present, Pioneer takes in over 60,000 data points each week. The company’s team of marketers and data scientists share findings through weekly generated Performance Scorecard reports as well as Brand Marketing Snapshots. Pioneer Intelligence offers reports on more than 500 U.S. cannabis brands. Ben Walters, founder of Pioneer Intelligence, says their mission is “to help cannabis industry stakeholders better understand how marketing strategies & tactics resonate with audiences.”

The Brand Marketing Byte will showcase highlights from Pioneer Intelligence’s Cannabis Brand Marketing Snapshots, featuring data-led case studies covering marketing and business development activities of U.S. licensed cannabis companies. We hope this column can serve as a resource for readers interested in branding and marketing.

In terms of scoring methodology, Pioneer Intelligence’s reporting favors “heat” over “strength” as the company prioritizes “relative change” above “absolute position.” This means that, for example when talking about social media audience size, they don’t just score brands based on the number of followers, but they also score audience growth. In fact, Pioneer’s algorithms put more value in growth figures than actual number of followers. For more insight on their methodology, along with a weekly updated index of the hottest brands, visit their website here.

Without further ado, here is a data-led, shallow dive on the California brand, Legion of Bloom:

Legion of Bloom – Content Strategy

Legion of Bloom (LOB) was founded in Northern California in 2015 when five independent growers joined forces. As one of the more widely recognizable brands in the region, they produce craft, high-quality cannabis products and are well known for their vape cartridges. The company has superior genetics and sustainable practices, which they capitalize on in their marketing efforts.

LOB has invested heavily in generating content, which appears to be fruitful. Their website has an in-depth introduction to terpenes for consumers and they utilize their blog section well with a high volume of quality content throughout the second half of 2019. It’s worth mentioning their website features full laboratory test results for all of their products, highlighting their commitment to transparency, consumer trust and brand recognition. Through looking at a few key metrics like indexed keywords, site strength and visit duration, it is apparent that LOB has increased their audience engagement significantly.

All of those factors combined, LOB has used a variety of content tools to grow their website consistently and sustainably, earning them #38 spot on last week’s Pioneer Index, a ranking of the hottest U.S. cannabis brands.

UN Votes to Delay Rescheduling of Cannabis for Second Time in Two Years

By Marguerite Arnold
1 Comment

For the second time in two years, the United Nations Commission on Narcotic Drugs (CND) has delayed a critical vote on the reclassification of cannabis. The CND met in Vienna, Austria from March 2-6. The vote is now expected to happen in December 2020. The discussion about reclassification of the plant, however, has been going on for a little longer than that.

WHO Recommendations

There are several recommendations that are on the table (even if far from perfect). See the full text of the recommendation here.

  1. Delta 9 Tetrahydrocannabinol should be added to Schedule I of the 1961 Single Convention on Narcotic Drugs.
  2. Delta 9 Tetrahydrocannabinol should be removed from the 1971 Convention on Psychotropic Substances.
  3. The six isomers of tetrahydrocannabinol chemically similar to Delta 9 THC should be classified similarly to Delta 9.
  4. Extracts and tinctures made from cannabis should be removed from Schedule I of the 1961 Single Convention but that they should also be classified per the act. In other words, extracts with THC should be considered narcotics with medical purpose and all dealt with per a single rule.
  5. Cannabidiol products containing no more than 0.2% of Delta 9 THC should not be under international control.
  6. Preparations with THC that are made as pharmaceutical products should be reclassified as Schedule III drugs per the 1961 Convention. (Note – Dronabinol is already classified this way in the United States and has been since 2010).

What Does This Really Mean?

Given the impending lockdown of whole industries right now, but a wartime footing for certain pharmaceutical drugs and medical equipment makers, on one hand, this seems like the obvious and safest thing to do. The world needs a vaccine and direct treatments and to focus research, manpower and money in that direction.

Further, and this should hopefully galvanize the industry internationally, what this also does is keep the consumption of the plant itself basically illegal while putting the focus on professionally prepared pharmaceutical drugs.

This is short-sighted. Cannabis is unlike other medications. Further, the high cost of pharmaceutical drugs makes wider treatment policy options extremely expensive to implement.

Further, this approach continues to define cannabis – specifically Delta 9 and THC – as a narcotic.

While it is undeniably true that for recreational users, there are narcotic effects, most long term patients do not react to the drug this way – particularly if they suffer from chronic pain due to neurological issues (including movement disorders), inflammatory diseases like rheumatoid arthritis and those that destroy the body’s immune response, like HIV.

There is a need for regulation, normalization of supply chains globally and of course, medical trials.The definitions of this plant, in other words, need to change. And not just for the benefit of pharmaceutical companies, but for patients as well.

Further, in a world that is quickly headed for a global recession unseen since the Great Depression, highly priced medications are not the best Rx.

As the German government responded to President Donald Trump recently, as he tried to offer a German company a billion dollars to only develop a vaccine for use on Americans, there are clearly limits to capitalism.

The Good News

It is highly unlikely by December, nine months into a global public health crisis which is widely expected to last for at least the next two years, that the UN will delay the vote again come December. There is a need for regulation, normalization of supply chains globally and of course, medical trials.

Beyond that, recreational reform also looms at a federal level in many countries and regions.

However, given the discussions so far, it is also clear that beyond the redefinition of cannabis, there will be greater legal opportunities to expand an industry too long stigmatized by old fashioned understandings and definitions of what cannabinoids are.

Quality in Manufacturing CBD Products: Q&A with the CEO of Medterra

By Cannabis Industry Journal Staff
2 Comments

The Center for Food Safety is a non-profit public interest and environmental advocacy organization. They work to protect public health and the environment by helping curb the use of harmful food production and promoting organic production and other sustainable agriculture practices. Earlier this month, the Center for Food Safety launched a new campaign in the hemp and CBD space: their Hemp CBD Scorecard evaluates some of the widely-known hemp and CBD companies on their production and processing methods, testing protocols and transparency to consumers.

Medterra is a CBD products company founded in 2017. They are one of a handful of companies to receive an ‘A’ letter grade on the Center for Food Safety’s Hemp CBD Scorecard. Jay Hartenbach, CEO of Medterra, says 3rd party testing, validation and strict quality standards are the key to earning recognition from organizations like the Center for Food Safety. We sat down with Jay to hear more about how his company is leading the industry in the space of self-regulation, transparency and sustainability.

Jay Hartenbach, CEO of Medterra

Cannabis Industry Journal: Tell us a bit about the history of Medterra – how did it become the brand it is today?

Jay Hartenbach: I’ve always had a passion for entrepreneurship and science. At Duke, I focused on Engineering Management and earned my B.S. in Biomedical Engineering from Miami University in 2012.

In 2016, I received a call from my former college mate J.P. Larsen who pitched me the idea to start a CBD company. After recognizing the potential of CBD to help a variety of issues, we set up shop in my living room and started building out Medterra in 2017.

With this growing need for trusted products without THC at affordable pricing, our startup of two expanded to nearly 100 employees in less than three years. We currently operate out of our headquarters in Irvine, California as one of today’s leading global CBD brands.

From the beginning, we recognized the power of CBD to help all walks of life. With so many companies prioritizing profits over their consumers, we saw an opportunity to stand out with world class customer service, affordable pricing, and efficacious amounts of CBD.

These priorities have remained unchanged for us as a company and it makes decision making easy for us. If you focus on prioritizing your customers, there is not any ability to cut corners or be content with the status quo of the industry. Consumers know they can trust the Medterra brand and we are continually pushing ourselves to make more effective products.

CIJ: Tell us about your quality standards – what do you do to ensure safety, quality and transparency with consumers?

Jay: We are consistently recognized in the industry for adhering to only the strictest standards for quality. From cultivation to finished product, we test our products multiple times to ensure quality standards are met and there are no unwanted compounds. Medterra CBD has always committed itself to manufacturing CBD products consumers can feel confident in.

In addition, Medterra is proud to be one the first 13 CBD companies to be given the U.S. Hemp Authority’s Certification Seal. This is currently the most stringent 3rd party certification in Hemp. With audits on cultivation, manufacturing and final products, the US Hemp Authority Seal signifies that we as a company meet the highest standards in the industry.

Furthermore, our partnership with Baylor College of Medicine was the first of its kind. Focused on testing both current products as well as validating new products, our partnership with Baylor allows us to provide the most efficacious products to our consumers.

CIJ: Tell us about your farming, processing and testing practices.

Jay: Medterra provides customers with true seed-to-sale purchases. Our industrial hemp is grown and extracted in accordance with the strict guidelines of the Kentucky Department of Agriculture. Each and every product that leaves the facility must be third-party tested to ensure consistency, quality and safety.

CIJ: How do you think the Hemp CBD Scorecard helps move the industry forward?

Jay: Given the unclear federal regulatory landscape, this is an important step in the right direction for CBD companies, because it allows consumers to be confident in the products they use. The more 3rd party testing and verification of CBD companies the better. With these presented to the public, CBD companies are less likely to cut corners and are forced to act in their consumer’s best interest. The Hemp CBD Scorecard helps move the industry forward because it forces accountability.

CIJ: How do you think the hemp/CBD industry will evolve with respect to product safety and transparency without government regulation?

Jay: We at Medterra will continue to go the extra mile and take steps to ensure consumers are getting only quality ingredients. Through these efforts, we hope to remove the stigma associated with cannabis cultivation and educate consumers on the efficacy and sustainability of hemp-derived CBD.