Tag Archives: consumer

British Barristers Take On Cannabis “Novel Food” Regulation In Brussels

By Marguerite Arnold
No Comments

The first thing to understand about the significance of the British barristers now challenging the EU’s classification of hemp extracts as a novel food is that this is like jumping into the middle of an action adventure by coming in at the second act. In other words, you miss the introduction and the first couple of car chases.

That said, this action movie also features a cannabis-flavored plot. Those used to the maddening hair splitting now going on just about everywhere as the industry gains legitimacy, in other words, are familiar with the larger story line.

Here are the “CBD Cliff’s Notes.”

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

It is highly significant that a major British cannabis trade organization, the Cannabis Trades Association, hired a leading law firm in London to go sue the EU over its recent decision to lump all CBD extracts into the same “novel” distinction. Up until now, only CBD sourced from cannabis had fallen prey to this strange regulation. Thus, the lawsuit. No Brexit themes involved. Yet. Although that too will play a role in all of this.

What Is This Really About?

If those in the CBD business are honest with themselves, the real reason for this segmented part of the cannabis industry to even exist in the first place is the race, desire and need to actually be allowed to operate in relative regulatory peace. No matter what the battles are on the THC front. CBD has been seen as a result, pretty much since the beginning of the new age of legalization, as the “safer” political and market entry choice by those in regions such as U.S. southern states and the burgeoning, can’t-wait-to-be-off-to-the-races, market in Europe. See the new federal hemp legalization bill in the United States as Exhibit A.

However, in Europe this has run into more than a few problems since the Swiss put “low THC” or “Cannabis Lite” on the map more locally. Starting with the whole discussion about licensing in general. And then, even more confusingly, about what to actually classify the plant. Especially when it is used in food and cosmetics as opposed to “medicine.”

Specifically, where does the cannabis plant in general, let alone its individual components, really fall when it comes to regulated human consumption?

european union states
Member states of the European Union

For the time being- read last year when the industry in Spain was facing police busts over CBD cookies on the shelves at health stores- the conventional industry wisdom was that this whole furore was “just” over the use of concentrates, tinctures and other products made from cannabis-sourced CBD. However, given the noise that Austria managed to make over Christmas about the entire “licensing” issue (namely who has the right to produce, sell and package even CBD as a cannabinoid no matter where it is sourced), the EU also moved all CBD products and tinctures- even those made from good old hemp- into the novel food category.

This means in effect, that even CBD extracts produced from the hemp plant (which is actually the majority of such product in Europe) must now be regulated as a “novel food” too. Even though in poor old hemp’s case, it is certainly the case that health food nuts have been consuming the same in Europe long before (and certainly after) standing EU “novel food” regulations were put into place back in the late 90’s.

Thus, the lawsuit, launched from a country unsure of whether it will even be in the EU post-May (either the month or the current PM).

According to the EU at least for now, CBD itself is a “novel food” no matter from where it is sourced. And that, according to not only science but food history is an absolute fallacy.consumer safety, from factory to pharmacy or farm to table, is never far from the discussion

Likely Outcomes

Those who were hoping that CBD would remain unregulated in the EU should think again. It is highly likely that what will happen is that CBD production licensing is in the cards and just about everywhere. Think GMPs but with a consumer-food twist.

While indie producers might groan at the prospect of fees and licensing procedures, remember this is Europe. And consumer safety, from factory to pharmacy or farm to table, is never far from the discussion.

While this lawsuit, in other words, is likely to make the EU think more closely about regulating CBD in general, what is most likely to happen is that entire enchilada will be lumped under a regime to insure that high quality production, particularly of crops bound for consumption, is also extended to anything that ends up in either a food or cosmetic product.

CBD Producers Have To Keep Current On Regs

Given the current murkiness that exists, in other words at this point across Europe, in every country and for every CBD product, exports here from other places are still not a great idea.

There are labeling, licensing and of course, ultimately legislative issues that are all still in flux. And while the outcome of the lawsuit might eventually regulate and standardize things, the idea that a license-free CBD production industry is clearly now dead in the water.

Top 5 Cybersecurity Threats To The Cannabis Industry

By Lalé Bonner
No Comments

Is your cannabis business an attractive target for cyber criminals? With the influx of investment to this market and new businesses opening frequently throughout the United States, the legal cannabis industry is a prime target for cyber criminals.

Never share personal information (login and passwords, social security numbers, payment card information, etc.) over email.Cannabis industry hackers pick their targets by vulnerability, exploiting consumer or patient data to darknet black markets and forums. The impact can be devastating to both the business and their consumers. With new laws on protecting consumer and patient data on the horizon, businesses that do not adequately protect that data, could face stiff fines, in addition to losing the trust of their customers.

So, how do these attacks present themselves? Recent studies implicate employees as the “weakest link” in the cybersecurity chain due to a lack of cybersecurity best practices and training. Implementing safeguards and providing employee training is imperative to the cybersecurity health of your business.

Now, let’s identify the top 5 cybersecurity threats to the cannabis industry and some valuable tips for protecting against these criminal hacks:

Phishing: Phishing is a form of cyber-attack, typically disguised as an official email from a trustworthy entity, attempting to dupe the recipient into revealing confidential information or downloading malware. Don’t take the bait! 91 percent of cyber-attacks start as phishing scams, with most of these lures being cast through fraudulent emails.

  • Tips: Do not download attachments from unknown senders!
  • Never share personal information (login and passwords, social security numbers, payment card information, etc.) over email.

Password Management: Password complexity is key to protecting against cyber breaches. When it comes to data hacking, 81 percent of breaches are caused by stolen or weak passwords. With a password often being the only barrier between you and a data breach, creating a complex password will dramatically decrease those password-sniffers from obtaining your sensitive information.

  • Tips: Create passwords that are at least 12 characters in length – include letters, numbers and symbols (*$%^!), and never use a default password. This will fend off brute-force attacks.
  • Change passwords every six months to a year, keeping them complicated and protected. For IT Managers, make using a password manager mandatory for all employees. (Pro-tip: LastPass is free).Be cautious with network selection as hackers set up free Wi-Fi networks that appear to be associated with an institution.

Public Wi-Fi: Being able to connect in public spaces, while a modern marvel of convenience, leaves us wide open to cyber-attacks. Whether you are in an airport or café, always err on the side of caution.

  • Tips: Be cautious with network selection as hackers set up free Wi-Fi networks that appear to be associated with an institution.
  • Browse in a “private” or “incognito” window to avoid saving information. If you have a VPN, use it. If not, then do not handle any sensitive data.

BYOD: Beware of Bad Apps: Using personal devices for work has become the norm. In fact, approximately 74 percent of businesses have bring-your-own-device (BYOD) policies or plans to adopt in the future.

With these platforms providing greater access to mobile apps, comes greater responsibility on the part of the end user.

  • Tips: Password protect devices that will be used for work (and, any device in general).
  • Only download applications from a trusted, authorized app store. Do not use untrusted play apps.
  • Mobile device protection is recommended for any device being used on a business network.

Whether it is an app from an unauthorized website or a lost/stolen device that was not password protected, cyber criminals do not need much to compromise critical data.Avoid logging into a SaaS application on a public computer or public Wi-Fi network.

SaaS Selectively: Keep Sensitive Data Safe: SaaS (Software As A Service) are cloud-based software solutions and chances are you are using one of these SaaS solutions for work purposes. IT is typically responsible for implementing security controls for SaaS applications, but ultimate responsibility falls on IT and the end user jointly. Here is what you can do to help keep these solutions safe:

  • Tips: Avoid logging into a SaaS application on a public computer or public Wi-Fi network.
  • Never share your SaaS login credentials with unauthorized persons over digital format or in person. Lastly, if you need to step away, always lock your screen during an active session.

While these tips will help keep your consumer/patient data from falling into the wrong hands, always have a plan B- backup plan! Your plan B must incorporate saving important data to a backup drive daily. Most likely, there is already a backup protocol in place for your mission-critical work data; however, for sanity’s sake, back up your BYOD devices as well.

How a Cloud QMS Can Get Cannabis Startups ISO 9001-Certified

By Mike Hansen
1 Comment

When it comes to compliance for cannabis startups, the ISO 9000 family of standards reigns supreme. Providing the guidelines for the concepts that make up a quality management system (QMS), the ISO family is composed of five standards: ISO 9000, 9001, 9002, 9003 and 9004. Outside of ISO 9001, ISO 9000 is the most important because it creates the foundation that guides all of the other standards.

ISO 9000 is split into two sections: fundamentals and vocabulary. Fundamentals covers the basic principles of quality management and the vocabulary section is a dictionary of quality management terminology. ISO 9000 is crucial because it provides direction on proper QMS implementation that will lead to achieving an ISO 9001 certification.

While the entire ISO 9000 family is focused on quality management systems that aim to help organizations “ensure that their products and services consistently meet customer’s requirements and that quality is consistently improved,” ISO 9001 is the only standard that lists actual requirements and requires certification.Cloud-based quality management software provides the flexibility and scalability, that cannabis startups need to comply with ISO 9001

Quality Management Systems (QMS)

When conceptualizing “quality management,” it is best to think of it as an organization’s definition of how it will meet the quality requirements of customers and other stakeholders who are affected by its work. Implementing this requires an extensive alignment of company processes and procedural governance.

It’s easiest to think of a QMS as the facilitator of outlined processes that are required to fulfill ISO 9001 requirements. For example, if an organization has defined a change request process, it could use a cloud-based QMS to put that process in place. However, the benefits of a cloud-based QMS don’t have to end at ISO 9001. It can also help organizations comply with other regulations like GxP.

ISO 9001 Requirements

ISO 9001 requirements can sound very generic because they’re meant to be applied to any organization, big or small, in any industry. The key to ISO 9001 is the concept of continuous improvement, which is why specific requirements for what “quality” is are not defined. Rather, companies must create objectives and work toward improving processes to meet those objectives. That said, a certified QMS still must do the following:

  • Meet the requirements of other stakeholders, for example, customer requirements and regulatory standards
  • Ensure that employees receive training outlining the quality requirements
  • Determine and document the processes, their interactions and their results
  • Be able to produce records to prove that system requirements have been met
  • Constantly monitor quality management software performance
  • Address any risks that could result from changes
  • Perform internal audits and correct any issues
  • Continuously improve the QMS

From creation to disposal, document protocols must be clear and properly followed.With that in mind, ISO 9001’s purpose is to evaluate whether or not a QMS does a good job of managing processes while also being able to help organizations identify areas that need improvement. In simple terms, ISO 9001 helps companies who were making an excellent product most of the time, make an excellent product every time.

How can cloud quality management software help you get your ISO 9001 certification? Once you create processes that adhere to ISO 9001 quality management standards, you have to put them into practice. Enter: quality management software. But, how exactly does it help?

Optimal Time to Value

First, cloud-based software is the most cost-efficient to implement. Secondly, since a QMS needs to be accessible to every employee regardless of whether they work at HQ or on-site, cloud QMS are built to be mobile-friendly and easily accessed from any location.

Automated Document Lifecycles & Version Control

From creation to disposal, document protocols must be clear and properly followed. As up-to-date documents are an important factor in maintaining high levels of quality, the most recent versions of approved documents should be readily available while previous editions should be hidden away.

With cloud quality management software, workflows can automate the review and approval processes by automatically sharing documents with the right reviewers. Then, after the document has been approved, the changes will automatically be applied to the master document while the obsolete version is archived, helping to remove any chance of it being accidentally used after the update.

Easy Document Location & Metadata

According to ISO 9001, searching through an organization’s documents should be as easy as searching with Google. It’s an added bonus when the quality management software enables users to add custom metadata to documents. Metadata is just extra information that helps to define a document (like file size, type, date modified). With certain cloud-based QMS’, you can add custom metadata fields to make documents easier to find. For example, you can add an “expiration date” field that allows you to look up policies based on when they are set to expire.With the growing number of data breaches happening every year, it’s important to address the security components of a QMS.

Document Traceability

In order to pass any ISO 9001 audit, there needs to be a complete audit trail for every document, including active documents and the earlier archived versions. While this might seem like a big ask, cloud quality management software helps make this simple. Every single change to a document, regardless of whether it’s the current or past version, is tracked. When combined with automated workflows, you’re able to produce a precise log of every change made by every user.

Advanced User Permissions & Central File Ownership

With the growing number of data breaches happening every year, it’s important to address the security components of a QMS. Many of these issues can be resolved with user permissions, which is generally related to managing users’ editing and sharing access. The proper view, edit, and approval rights go a long way to reducing the risk of human error.

Another feature that may seem like common sense is central file ownership. When the organization owns all of its documents, there’s no need to worry that important files will be lost or deleted. With one owner, the damage that can be inflicted by malicious third-parties is also limited.

Cloud-based quality management software provides the flexibility and scalability, that cannabis startups need to comply with ISO 9001. With the cloud as a foundation, these systems will continue to be assets for the cannabis industry as it gains momentum and expands more.

UKflag

The Rise of The Cannabis Clinic Model In Europe

By Marguerite Arnold
No Comments
UKflag

The opening of the UK’s first cannabis clinic is certainly cause for cheer. The effort, backed by a growing UK powerhouse that includes European Cannabis Holdings, has just opened its first private cannabis clinic in the UK, with two more on the way, including one in London by the end of the year.

The clinic will see patients who can afford to pay, in other words those who are privately insured and not covered by the NHS. The clinics will also serve those with chronic illnesses including chronic pain and epilepsy.

This development will also undoubtedly begin to increase the number of actual legal British cannabis patients, which is significant in and of itself. That count now, close to five months after cannabis became technically available via Schedule II prescription last year, is a shocking four patients. This is not a typo.

Presumably, this means that patients who enter the market this way will also be able to access newly imported Dutch cannabis which has just started to enter the country in bulk. Not to mention be able to find pharmacies who stock the drug.

For the backers of ECH (which include SOL Global), these are strategic moves indeed, which also bode well for those who can afford access.

But does this herald a new shift in the way that cannabis will be prescribed for the mainstream in the UK if not across Europe? That is not so clear.

The History of Cannabis Clinics… In Israel and Beyond

From the medical side of the world, it has been cannabis specialty pain clinics that have moved the conversation forward and served patients in places like Israel. In the latter part of the last decade, Israel slowly began to liberalize access not via dispensaries, as in the American model, but rather via specialty pain clinics paid for by the government. It was only when patient attendance at such prescription and dispensation points became flooded by applicants that the government, just a few short years ago, began to allow regular doctors to prescribe the drug and regular pharmacies to carry it.

What does this say about a British market where reform has just come, and only four patients?There are currently various initiatives sprinkled around Europe- mostly in the form of collectives of doctors who try to help get their patients cannabinoid treatments. See, for example, Kalapa Clinic in Spain. Or the “self help” group of patients in Germany loosely associated with Dr. Grotenhermann (one of the country’s best-known cannabinoid doctors).

Yet in Germany, the first country in Europe to liberalize medical use, there are as yet no cannabis clinics of either the private or public kind (although there have also been several unsuccessful attempts to do just this since 2017 in cities like Berlin and Munich). Part of the reason for the failure of the model in Germany at least is due to the fact that while specialty doctors are needed to help guide patients through the complicated approvals process, the payment for the same from the insurance companies (even private insurers) is so low it is not yet economically feasible to set up a clinic based on this model.

That said, it is clearly an idea that has occurred to more than a few entities. In Germany, however, land of (at least) 40,000 patients, this model has yet to take off. What does this say about a British market where reform has just come, and only four patients? Even as early as spring 2017, when the German government changed the law mandating insurance coverage, there were 800 German patients in the system.

Why The UK Is Likely To Be Different

Image: Flickr

Cannabis patients may actually be some of the best situated patients to ride out the Brexit crisis that will hit all drugs. Why? From the start, the strange classification of the drug is requiring bespoke solutions for niche patients. While it may not be fair, this in turn will at least start to create a core group of medical users.

Creating at least that first critical mass is also unbelievably important for greater access and reform, if not speeding it on its way. And the backers of the new clinics are well aware that impetus on this front will not come from the much-beleaguered NHS but rather private initiatives like the ones now being launched in the UK.

Disclaimer: ECH is a sponsor of the MedPayRx go to market pilot trial.

steep-hill-labs-logo

Steep Hill Expands To New Jersey

By Aaron G. Biros
No Comments
steep-hill-labs-logo

steep-hill-labs-logoAccording to a press release published today, Steep Hill has signed a licensing agreement with Green Analytics East to open a new laboratory, Steep Hill New Jersey. “We are pleased to announce a licensee partnership with Green Analytics East to bring Steep Hill to New Jersey,” says Jeffrey Monat, chairman of the Steep Hill board of directors. “Since 2008, Steep Hill has developed and now employs cutting edge cannabis testing practices, providing analysis to ensure safe medicine and products. With Green Analytics East as our trusted partner, New Jersey patients and consumers can be confident that all Steep Hill-tested products will fully comply with public safety and regulatory standards.”

They haven’t obtained the local permits yet, but the press release states they expect to be open for business in the third quarter of 2019. Steep Hill began their cannabis laboratory testing business in California. Since their start in 2008, the company has grown rapidly, developing programs for regulatory compliance testing in medical and recreational cannabis markets. They have also ventured into research and development testing, licensing, genetics and remote testing.

The company has a history of expanding into new markets via licensing partnerships, including states such as Washington D.C., Pennsylvania, Maryland, Oregon, Hawaii, among others. As recently as May of last year, Steep Hill announced they will expand their international footprint as well, including opening locations in countries like Mexico, Germany, Spain, France, Italy, Switzerland and the United Kingdom, all through their Canadian branch.

New Jersey Governor Phil Murphy
New Jersey Governor Phil Murphy

The news of Steep Hill moving into the New Jersey market comes at a time when Governor Phil Murphy and lawmakers in the state are in the midst of planning adult use legalization. According to Shannon Hoffman, director of operations of Steep Hill New Jersey, they are hoping lawmakers reach a decision soon. “We are excited to bring our focus of service, accuracy, and scientific knowledge and expertise to the New Jersey market,” says Hoffman. “We look forward to serving the licensed producers, the patient community, and hopefully soon, the adult use consumer.”

Legalization & Regulation Recap: This Week’s News

By Aaron G. Biros
No Comments

Across the country, a handful of states are expected to move forward with a number of bills making their way each state’s legislature. Here is a quick recap on some of the more newsworthy bills from this week.

Arizona

When Arizona legalized medical cannabis use, there was no provision in the legislation that required laboratory testing to insure the safety of cannabis products. To this day, Arizona is one of the few states left that has legalized medical cannabis, but does not require lab testing. A bill, SB 1494, that just passed through the state’s Senate could very well change that. According to azmarijuana.com, the bill passed unanimously through the Arizona Senate and would require the Arizona Department of Health Services (ADHS) to implement regulations for laboratories to test for contaminates like pesticides.

They need at least 75% of the House to vote in favor in order for it to pass. If that happens, testing could be required as soon as June 1, 2020.

New Hampshire

In the Northeast, New Hampshire and Vermont have bills related to cannabis making their way through the state legislatures. A committee in the New Hampshire House of Representatives just backed a bill to legalize recreational cannabis.

The House Criminal Justice and Public Safety Committee voted 10-9 to recommend HB 481, which would legalize recreational cannabis, including growing up to 12 plants, imposing a tax of $30 per ounce on cannabis sold through retail. It would also set up a regulatory agency in charge of licensing and regulating the industry.

New Jersey Governor Phil Murphy
New Jersey Governor Phil Murphy

New Jersey

Governor Phil Murphy met with lawmakers earlier this week to discuss the legalization of recreational cannabis. According to CBS New York, the Governor reached a deal with Senate President Steve Sweeney, Assembly Speaker Craig Coughlin, Sen. Nicholas Scutari and Assemblywoman Annette Quijano to introduce a bill that he would sign into law.

The deal would legalize and regulate recreational cannabis, expunge previous cannabis-related convictions, levy a $42 tax per ounce of cannabis sold, along with setting up a commission to issue licenses and regulate the market. When Governor Murphy ran for office, his campaign included a pledge to legalize recreational cannabis, A previous attempt to get a bill through the legislature failed to get enough votes last year.

Vermont

Back in February, the Vermont Senate passed a bill to regulate and tax recreational cannabis with a veto-proof majority. SB 54 is now in committee review in the House, where it is expected to see more hurdles, according to Burlington Free Press.

Another bill was introduced in the Vermont Senate, SB 117,which would reportedly open up more access to the medical cannabis program, including increasing possession limits, allowing patients to grow more plants at a time and set up a lab testing program as well.

Wyoming

Last week, Governor Mark Gordon signed a bill into law that legalizes and regulates the cultivation and sales of hemp-derived CBD. The state is now working with the WY Department of Agriculture to submit plans to the federal government for regulating the industry.

Marguerite Arnold

Countries Take Lessons From Others On Legalizing Cannabis

By Marguerite Arnold
No Comments
Marguerite Arnold

As the German bid fiasco proves, and in spades, there is no easy transition out of prohibition. As of this April, it will be two years since the German Cannabis Agency issued its first cultivation bid. Since then, the first attempt went down in legal flames (in court) and the agency in charge, BfArM took an embarrassing hit for committing a “technical fault.” As of April, the second issuance gets its day in court. And then presumably, hopefully, cultivation can start to get going.

However, the German cultivation bid is far from the only time that government officials and regulators have created canna Frankensteins. In every legalizing market so far, in fact, from Colorado’s recreational start in 2014 to Canada, lawsuits, flubs and mistakes have been the order of the day.

There is a growing debate in Europe over how the cannabis industry should be allowed to flourish.States throughout the US continue to model their legalization frameworks off of states that have already done so. No wonder, then that as legalization rolls on, other countries are beginning to study the early movers- for tips on what to do and what to avoid.

New Zealand Takes A Look At Portugal

New Zealand is widely expected to become either the “next” country (or the one after that) to fully legalize recreational cannabis. Further it plans to do so during a national election (presumably ahead of the U.S. but that will be interesting to watch). New Zealand has jumped the gun already and put it on the electoral agenda.

That leaves the Kiwis with at least another 18 months to consider how they might pull it off. Don’t forget, it took the Canadians that long, with one failed initiation date last summer that was pushed to the fall. And that was with a medical market that was already three years old.

As of this month at least, New Zealanders are looking at several options, Portugal being one of them. Portugal gained distinction by decriminalizing all drugs at the turn of the century and has not looked back.

The country has seen a steady decline in all the bad stuff associated with the black market. Overdoses, drug crime, teen use and HIV infections have all dropped dramatically.

That said, for all Portugal’s forward motion, nobody else, yet, has quite followed suit.

Decriminalization, it should be pointed out, is also only one of the many issues facing a national change in policy. As Canada knows well.

Luxembourg Takes A Look At Canada

The Greens in Luxembourg certainly made news last year when they announced that recreational cannabis legalization was on their five-year legislative plan. In a tip to both U.S. and Canadian discussions about how legalization can increase tax revenues, Luxembourgers are also clearly looking at how to follow suit.

Auroraaurora logo cannabis so far has the only distribution agreement inked with the country to provide medical supplies, but it is unknown at this point whether Luxembourg will be content to merely import or grow its own.

One of the biggest problems Europeans will encounter immediately in looking at the Canadian transition to recreational use is that the government literally had to mandate an additional five-year period for medical use after the beginning of the recreational market. So far, at least, Luxembourgians appear to want to do this the other way around. They have already created a multi year test and study program for medical uses of the drug.

A Big Difference In Approaches

There is a growing debate in Europe over how the cannabis industry should be allowed to flourish. On one end of the discussion who see no issues with the North American model of public companies, in particular, having the greatest influence over the shape of the industry. But this is not the only discussion in the room at this point, particularly given the huge head start the Canadian public companies now have in the rest of the world.

In places like Spain and Thailand, for example, politicians are also starting to bring other models to the fore- including protectionist policies around domestic cannabis production.

Regardless, compare and contrast is a trend that is still in its infancy as the market leaders struggle with the implications of half-baked policies and those who follow seek to emulate the successes but avoid the mistakes.

2nd Annual Cannabis Labs Virtual Conference Announced

By Cannabis Industry Journal Staff
No Comments

The 2ndAnnual Cannabis Labs Virtual Conference is set to take place on Tuesday, April 2, 2019, starting at 12:00 Noon and concluding at 4:00 PM EDT. This complimentary series of webinars will take a deep dive into a variety of subjects related to cannabis testing and the laboratory industry.

The virtual event will help attendees better understand some of the more technical aspects of starting and operating a laboratory. Topics discussed will include pesticide testing, cannabinoid and terpene testing, the new ISO 17025:2017 accreditation and a lesson in starting a laboratory in a new market.

Attendees registering for this complimentary series of webinars will get access to four veterans of the cannabis lab testing industry, who are available for Q&A after each presentation. In addition to getting the opportunity to chat with these subject matter experts on April 2, a recording of the presentations will be made available to all who register.

Charles Deibel, President & CEO – Deibel Labs, Inc.

Here is a snapshot of the agenda:

Pesticide Testing: Methods, Strategies & Sampling
Charles Deibel, President & CEO – Deibel Labs, Inc.

Pesticides represent the number one area for batch failures in the US cannabis market. These are concerns not only for consumers, but are a very big concern for cultivators and manufacturers of cannabis products. remediation of the pesticides, once they are in the product are not always feasible From the lab level, they are also the hardest test to run in the laboratory, even one equipped with state-of-the-art equipment. The best instruments on the market are very expensive and there are no standardized methods, meaning lab to lab variability has happened.

  • What are the pesticides in cannabis and are there any that are the “main concerns” or ones that stand out as particularly damaging?
  • What is a basic breakdown of the testing and methods used for pesticide testing?
  • What are the best strategies for the sampling of cannabis products?

    Chris Martinez
    Chris Martinez, Co-Founder & President, EVIO Labs FL

Building a Lab in an Emerging Market
Chris Martinez, Co-Founder & President, EVIO Labs FL

  • Will present a discussion of the genesis of EVIO Labs Florida, how to start a lab in a new market
  • Challenges in how we navigated changing regulations in a state with newly legalized cannabis
  • Expanding a lab to a second location – logistics, hiring, training, consistency.

Cannabinoid & Terpene Testing: Methods, Strategies & Standardization

Dr. Cindy Orser, Chief Science Officer, Digipath Labs

  • Appreciation of “measurement uncertainty” in cannabis testing

    Dr. Cindy Orser, Chief Science Officer, Digipath Labs
  • Standardization of testing methods is a high priority
  • Terpenes are the distinguishing chemicals in cannabis sensory perception and chemotaxonomy

Benefits of Accreditation to the ISO 17025:2017 Standard
Jane Weitzel, Independent Consultant

  • The ISO/IEC 17025:2017 standard is now being used to accredit cannabis testing laboratories. From this presentation you will learn the key new aspects of the standard. This includes risk-based thinking. Many aspects of this risk approach require the use of measurement uncertainty. This means the measurement uncertainty must be adequately evaluated. You will be introduced to evaluating and using measurement uncertainty.
  • The 2017 standard emphasizes conflict of interest and impartiality. Procedures and practices to achieve impartiality will be shown. This reduces the risk of potentially damaging leaks of information or the risk of people not working to the best interests of the laboratory and its clients.

    Jane Weitzel, Independent Consultant
  • The 2017 standard is a valuable and useful business tool that can save the laboratory resources, effort and money. Are you doing too much testing? Are you doing too little testing? When you evaluate the measurement uncertainty you can use it to learn the steps in your test method that need enhancement to reduce the risk of making mistakes. You can also use the measurement uncertainty to focus on the significant steps and stop wasting time on steps and activities that are insignificant.
  • These benefits of laboratory accreditation will be demonstrated with examples from the cannabis industry.

To learn more about this complimentary series of webinars, click here to look at the agenda and register.

Food Safety Hazards for the Cannabis Industry: ERP Can Help

By Daniel Erickson
No Comments

To say that there has been explosive growth in the cannabis edibles market is an understatement. In the next 5 years, edibles are expected to become a $5.3 billion industry according to the Brightfield Group, a cannabis market research firm. Skyrocketing demand for cannabis infusion in food and beverage products, both recreational and medical, has prompted concern for the health and safety of consumers due to the lack of federal legality and regulatory guidelines for these products. Edibles consumers assume the same level of safety and quality present in other food and beverage products in the market. Progressive cannabis operations are opting to follow current food safety guidelines to mitigate hazards despite not being legally required to do so. Utilizing these guidelines, as well as incorporating an industry-specific ERP solution to automate processes, enables cannabis businesses to provide quality, consistent products and establish standards to support the eventuality of federal cannabis legalization.

FDAlogoEdibles consumption has grown not only in a recreational capacity but also for medicinal use to treat chronic pain, relieve epilepsy symptoms, decrease nausea, combat anxiety and other health issues. Cannabidiol (CBD) infused products take many forms including candies, baked goods, chocolate, oils, sprays, beer, soda, tea and coffee. Their popularity is partly due to their more socially acceptable use, creating an appeal to a wider audience. While the Food and Drug Administration (FDA) is responsible for overseeing food and beverage safety for products sold in the United States, their regulations are not enforced in the cannabis-infused marketplace. Without federal regulatory standards, there exist inherent food safety concerns that create risks to consumers. The average cannabis edibles customer is likely unaware of the “consume at your own risk” nature of the products.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

There are many consequences of not addressing food safety hazards, as the possibility of food-borne illnesses resulting from unsafe and unsanitary manufacturing facilities have become increasingly likely in an unregulated market. In addition to these concerns, problems particular to cannabis growing and harvesting practices are also possible. Aflatoxins (mold carcinogens) on the cannabis bud, pesticide residue on plants, pest contamination, improper employee handling and training and inaccurate levels of CBD all contribute to the risk of outbreaks, hefty fines, recalls or business closure. To mitigate the risk of exposure, it is recommended that edible manufacturers employ a proactive approach of observing proper food safety standards that encompass the growing, manufacturing, packaging, handling, storing and selling of products. With a focus on safety, cannabis edible manufacturers utilizing an ERP solution and vendor with experience in food safety management will reap the benefits that food and beverage businesses have experienced for decades.

Following established food safety protocols and guidelines of the food and beverage and dietary supplement industry, allows manufacturers of cannabis-infused edibles to implement a proactive approach by focusing on safety and reducing the risk to their operations. Food and beverage manufacturing best practices include: maintaining supplier list, quality control testing, sanitary handling of consumables, maintaining clean facilities and mitigating cross-contamination. Successful food and beverage manufacturers also incorporate a food safety team, preventative controls, and a food safety plan (FSP) including a detailed recall plan into their safety initiatives.HACCP

Establishing and maintaining a supplier list with approved quality ingredients is an essential building block for reducing food safety hazards and can be easily maintained within an ERP. Documentation of vendor information and recording of stringent testing results ensures that specific quality standards are met. Conducting extensive research regarding the source of the ingredients for use in cannabis edibles allows companies to confirm that raw ingredients were processed in a safe environment. The importance of supply chain visibility cannot be understated, as suppliers are in control of potential hazards. Quality processes and regularly performed testing is automated through the workflow of an ERP solution in the manufacturing facility – enabling noncompliant raw materials to be quarantined and removed from production. The ERP solution allows for management of critical control points to catch non-compliance issues and set-up of alternate suppliers in case of supplier-related issues. Maintaining approved supplier lists is an industry best practice that provides current and accurate information in the event of possible consumer adverse reactions.

GMPFollowing current Good Manufacturing Practices (cGMPs) should underlie efforts to address food safety concerns in the cannabis edibles industry. An ERP solution assists with documenting these quality initiatives to ensure the safe and sanitary manufacturing, storage and packaging of food for human consumption. This includes evaluating equipment status, establishing cleaning and sanitation procedures and eliminating allergen cross-contamination. Employee training is conducted and documentation maintained in the ERP solution to ensure hygienic procedures, allergen awareness, illness reporting and required food or cannabis handling certifications.

Cannabis businesses can benefit from establishing a food safety team tasked with developing a Hazard Analysis Critical Control Points (HACCP) plan to provide effective procedures and protect consumers from the hazards inherent in edible cannabis products – including biological, chemical and physical dangers. Automating processes within an ERP solution prevents and controls hazards before food safety is compromised. Since HACCP plans have historically been used by food and beverage manufacturers to ensure a safe product for the consumer, cannabis edibles manufacturers can apply the lessons from these food safety protocols and procedures in their initiatives.By utilizing food safety best practices partnered with an ERP solution, cannabis businesses can avoid the negative consequences resulting from failure to address food safety hazards in manufacturing, storage and packaging. 

A comprehensive FSP, as required by the FDA’s Food Safety Modernization Act (FSMA), identifies food safety hazards and guides the development of a company-specific, validated plan. This plan documents processes throughout the manufacturing, processing, packaging and storage stages of the operation. ERP software provides real-time, forward and backward lot traceability from seed-to-sale with the ability to track materials, document recipes and accurately label products. This detailed level of traceability provides an automated system that implements and documents food safety policies throughout the manufacturing process. With a trained Preventative Control Qualified Individual (PCQI) implementing the FSP, preventative controls, recall plans and employee training records are maintained in an integrated system.

The cannabis market’s tremendous growth has driven edibles manufacturers to follow the same guidelines as mainstream food and beverage companies to ensure safety is afforded equally to consumers of cannabis edibles. By utilizing food safety best practices partnered with an ERP solution, cannabis businesses can avoid the negative consequences resulting from failure to address food safety hazards in manufacturing, storage and packaging. At the end of the day, it’s up to cannabis manufacturers to be proactive in ensuring cannabis edibles are safe to consume until regulations are mandated.

8 Mistakes Businesses Make When Managing Product Labels: Part 2

By Rob Freeman
No Comments

Editor’s Note: This article contains the last four common labeling mistakes that businesses can make. The previous four mistakes were published last week here. 

Mistake #5: Planning Just-In-Time Inventory Too Close to Production; Effecting On-time Deliveries

Using JIT (Just-In-Time) management is common throughout North America. JIT involves manufacturers and suppliers trying to minimize, or even eliminate, their inventory. This approach relies on suppliers to deliver materials just before production is started. When this method is done properly, it is a very efficient way to minimize production costs, but when companies do not prepare for a “crisis” situation, they will have nothing in stock to fall back on.

Minimizing inventory costs is always a challenge. It’s a never-ending contradiction trying to maintain low inventory costs while factoring the percentage of potential new growth. Calculations can fluctuate from month to month, especially when industries rely on commodity ingredients or are impacted by sudden regulatory changes like we see with the cannabis, food packaging, and health supplement markets. Front runners in these markets practice minimizing their product label inventories, but their needs might quickly change from one day to the next. They do not want to place a one-time annual label order for each SKU. If an ingredient runs out of supply or a regulatory change affects their production profile, they would be sitting on unusable labels that will go to waste.

Best Method Approach: Think in terms of what the bottom line effect will be when factoring how you should manage your inventory. Try not to reduce your inventory too low. This could cause your company to experience shipping delays when complications arise with suppliers or quality control. You should have at least one-to-two production cycles worth of inventory available for those “crisis” moments.

Rob Freeman, author of this article, is the Director of Business Development and Marketing at Label Solutions Inc.

This backup inventory can also help reduce paying for excessive rush fees. Sometimes businesses can experience unexpected demand for a product, especially when companies consolidate production plants, acquire other companies, or have a new product launch. Supplier material shortages can greatly impact internal quality control and delay delivery times. Building a strong business relationship with your label provider is key to working around business demands and potential problems; which in turn, will help your label provider ship on-time deliveries so your production deadlines are met.

Mistake #6: Selecting the Lowest Price, But Approving the Wrong Materials for Your Product Needs

Sometimes clients buy the lowest priced labels without their procurement department knowing what the label specification requirements should be. It’s always a good business practice to shop for the best price, but it is equally as important to make sure you understand what you’re buying for that price.

Label providers vary on the quality of work they do, value-added services they offer, their production expertise, and the quality of material they use. Additionally, the hidden potential costs to lowest price shopping is that once the construction of those labels fail, it could cost you much more than a simple reorder.

Best Method Approach:Establish clear and concise procedures so your production team can forward the necessary criteria for your procurement department to have during the buying process.

brands want strong, eye-catching labels that stand out online, on the shelf, and/or on the retail floor. On a separate note, some businesses and manufacturers don’t care how long their brand and contact information remains on their product after the purchase. This gives them the flexibility to buy extremely low-quality material, but the outcome is a much lower brand awareness reminder at the end of the product’s use. But if your business model is such that you sell a “one-time use” product and all that you need is the label to survive through the POS, then the cheapest materials and lowest price might be your best solution.

In most cases, brands want strong, eye-catching labels that stand out online, on the shelf, and/or on the retail floor. Manufacturers want their labels to remain on their product, so their customers have a reminder of what they need to buy again or the ability to reread product use instructions and label warnings. Even if you don’t require the most expensive materials, using good quality, durable substrates and inks is always a solid approach.

Mistake #7: Not Preparing for Oil Based Products

One of the most popular products expected in retail for 2019 will be essential oils and/or CBD infused oil ingredients in foods, drinks, and wellness supplements. One of the most common mistakes relating to oil-based products is that entrepreneurs often forget that oils can soak into paper substrates and/or disperse certain inks, even when laminated.

Whether your product is on display in retail, or being sampled at a trade show, the last thing you want to be concerned about is your product name and contact information smearing or washing out. Even the smallest drop of oil can seep into a paper label and spread the ink to the point that you’ll have your own little tie-dye action on the label. That might look cool to some, but you lose your branding and the perception with most retail customers will be that your company is either cheap or is not professional.

Best Method Approach: There are affordable films such as polypropylene materials that will allow you to print the look you want while still protecting your branding and product. From cooking oils to industrial grade oils, the approach is the same but may require different types of films and ink solubility, so each bottle and container has oil resistant labels that maintain a professional look.Whenever one of our clients launch a new product or changes the intended surface conditions for label application, testing the label is always extremely important

If you’re feeling overwhelmed, remember that you don’t need to select all the label materials on your own. Your label provider should help you settle on the best solution.

Mistake #8: Not Properly Testing New Labels and New Product Surfaces

This is one of the most common and overlooked issues. Whenever one of our clients launch a new product or changes the intended surface conditions for label application, testing the label is always extremely important. This is especially critical when dealing with high quantity orders.

Best Method Approach: Testing parameters should be outlined by you and your label provider so both parties understand how long the label and the ink consistency should remain on the surface after purchase and use of product. There are wide variations of testing, so it will depend on the type of product and the intended industry.

For example, testing hand-applied, durable labels on powder coated metals for the boat and trailer industry require a completely different testing method compared to tests for typical food and beverage products that are machine applied. Usually, with uniform container products like food clamshell packaging, beverage cans, and supplement jars, all you will need to do is make sure to test labels on your production line, so your team is confident with the results.

Final Thoughts

In summary, preventing just one of these mistakes can yield huge cost savings no matter if your company is a start-up or a large corporation. Even if these eight common mistakes do not directly apply to your own issues, hopefully the “Best Methods” approach will give your company ideas about how you can prepare for future product releases, reduce product label issues, and improve your own quality control metrics.

If you have topics relating to product labeling that you would like me to discuss, please write to info@easylabeling.com. Be sure to save this article and forward it to your peers for future reference.