Tag Archives: edibles

February 25, 2019

Food Safety Hazards for the Cannabis Industry: ERP Can Help

By Daniel Erickson

To say that there has been explosive growth in the cannabis edibles market is an understatement. In the next 5 years, edibles are expected to become a $5.3 billion industry according to the Brightfield Group, a cannabis market research firm. Skyrocketing demand for cannabis infusion in food and beverage products, both recreational and medical, has prompted concern for the health and safety of consumers due to the lack of federal legality and regulatory guidelines for these products. Edibles consumers assume the same level of safety and quality present in other food and beverage products in the market. Progressive cannabis operations are opting to follow current food safety guidelines to mitigate hazards despite not being legally required to do so. Utilizing these guidelines, as well as incorporating an industry-specific ERP solution to automate processes, enables cannabis businesses to provide quality, consistent products and establish standards to support the eventuality of federal cannabis legalization.

Edibles consumption has grown not only in a recreational capacity but also for medicinal use to treat chronic pain, relieve epilepsy symptoms, decrease nausea, combat anxiety and other health issues. Cannabidiol (CBD) infused products take many forms including candies, baked goods, chocolate, oils, sprays, beer, soda, tea and coffee. Their popularity is partly due to their more socially acceptable use, creating an appeal to a wider audience. While the Food and Drug Administration (FDA) is responsible for overseeing food and beverage safety for products sold in the United States, their regulations are not enforced in the cannabis-infused marketplace. Without federal regulatory standards, there exist inherent food safety concerns that create risks to consumers. The average cannabis edibles customer is likely unaware of the “consume at your own risk” nature of the products.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

There are many consequences of not addressing food safety hazards, as the possibility of food-borne illnesses resulting from unsafe and unsanitary manufacturing facilities have become increasingly likely in an unregulated market. In addition to these concerns, problems particular to cannabis growing and harvesting practices are also possible. Aflatoxins (mold carcinogens) on the cannabis bud, pesticide residue on plants, pest contamination, improper employee handling and training and inaccurate levels of CBD all contribute to the risk of outbreaks, hefty fines, recalls or business closure. To mitigate the risk of exposure, it is recommended that edible manufacturers employ a proactive approach of observing proper food safety standards that encompass the growing, manufacturing, packaging, handling, storing and selling of products. With a focus on safety, cannabis edible manufacturers utilizing an ERP solution and vendor with experience in food safety management will reap the benefits that food and beverage businesses have experienced for decades.

Following established food safety protocols and guidelines of the food and beverage and dietary supplement industry, allows manufacturers of cannabis-infused edibles to implement a proactive approach by focusing on safety and reducing the risk to their operations. Food and beverage manufacturing best practices include: maintaining supplier list, quality control testing, sanitary handling of consumables, maintaining clean facilities and mitigating cross-contamination. Successful food and beverage manufacturers also incorporate a food safety team, preventative controls, and a food safety plan (FSP) including a detailed recall plan into their safety initiatives.

Establishing and maintaining a supplier list with approved quality ingredients is an essential building block for reducing food safety hazards and can be easily maintained within an ERP. Documentation of vendor information and recording of stringent testing results ensures that specific quality standards are met. Conducting extensive research regarding the source of the ingredients for use in cannabis edibles allows companies to confirm that raw ingredients were processed in a safe environment. The importance of supply chain visibility cannot be understated, as suppliers are in control of potential hazards. Quality processes and regularly performed testing is automated through the workflow of an ERP solution in the manufacturing facility – enabling noncompliant raw materials to be quarantined and removed from production. The ERP solution allows for management of critical control points to catch non-compliance issues and set-up of alternate suppliers in case of supplier-related issues. Maintaining approved supplier lists is an industry best practice that provides current and accurate information in the event of possible consumer adverse reactions.

Following current Good Manufacturing Practices (cGMPs) should underlie efforts to address food safety concerns in the cannabis edibles industry. An ERP solution assists with documenting these quality initiatives to ensure the safe and sanitary manufacturing, storage and packaging of food for human consumption. This includes evaluating equipment status, establishing cleaning and sanitation procedures and eliminating allergen cross-contamination. Employee training is conducted and documentation maintained in the ERP solution to ensure hygienic procedures, allergen awareness, illness reporting and required food or cannabis handling certifications.

Cannabis businesses can benefit from establishing a food safety team tasked with developing a Hazard Analysis Critical Control Points (HACCP) plan to provide effective procedures and protect consumers from the hazards inherent in edible cannabis products – including biological, chemical and physical dangers. Automating processes within an ERP solution prevents and controls hazards before food safety is compromised. Since HACCP plans have historically been used by food and beverage manufacturers to ensure a safe product for the consumer, cannabis edibles manufacturers can apply the lessons from these food safety protocols and procedures in their initiatives.By utilizing food safety best practices partnered with an ERP solution, cannabis businesses can avoid the negative consequences resulting from failure to address food safety hazards in manufacturing, storage and packaging.

A comprehensive FSP, as required by the FDA’s Food Safety Modernization Act (FSMA), identifies food safety hazards and guides the development of a company-specific, validated plan. This plan documents processes throughout the manufacturing, processing, packaging and storage stages of the operation. ERP software provides real-time, forward and backward lot traceability from seed-to-sale with the ability to track materials, document recipes and accurately label products. This detailed level of traceability provides an automated system that implements and documents food safety policies throughout the manufacturing process. With a trained Preventative Control Qualified Individual (PCQI) implementing the FSP, preventative controls, recall plans and employee training records are maintained in an integrated system.

The cannabis market’s tremendous growth has driven edibles manufacturers to follow the same guidelines as mainstream food and beverage companies to ensure safety is afforded equally to consumers of cannabis edibles. By utilizing food safety best practices partnered with an ERP solution, cannabis businesses can avoid the negative consequences resulting from failure to address food safety hazards in manufacturing, storage and packaging. At the end of the day, it’s up to cannabis manufacturers to be proactive in ensuring cannabis edibles are safe to consume until regulations are mandated.

September 19, 2018

Packaging Design for Cannabis Products: How to Build Trust and Gain Customers

By Katie Lundin

No Comments

To sell more cannabis products, you must build trust with your customers. Design Shack Magazine explains: “Trust is a key component of user loyalty, and a reason why people come to your company or brand.”

If you don’t get your package design right, people might simply ignore your cannabis products.But building trust is a big challenge for new medical cannabis businesses. That’s where good design can help:“While a lot of trust comes from past performance and a brand’s track-record, it also comes from the design. How a website, poster or package looks can impact how users feel about it and whether they take the leap from casual looker to brand loyalist.”

For a cannabis health supplement business, the product packaging design is one of the most important ways to reassure consumers and build trust.

When a prospective customer first sees your product, they see the packaging before they can touch or see the product. Good product packaging can raise concerns or instill comfort and confidence in a potential buyer.

If you don’t get your package design right, people might simply ignore your cannabis products.

So, let’s take a look at what your business can do to create great product packaging designs that will win over the skeptics and gain customers.

Include the Right Content On Product Packaging

Designing packaging that inspires trust starts with including the right content.

Start by telling people exactly what’s inside your packaging. For example, specify what your product is (CBD Extract Oil vs. Full-Spectrum Hemp Oil Caplets), how much of it there is, a production lot number and a potency level.

Include any qualifiers that may reassure your customers – such as “Organic,” “Non-GMO” or “CO2-Extracted.”

Image courtesy of Kannabia Seed Company

Communicate this information in clean, concise language that shows you have nothing to hide. And, speaking of not hiding – include contact information for your business. Many businesses bury their contact info on their websites and packaging. Don’t do that.

People trust businesses that are transparent and easy to reach. Customers want to know that if they have a question or something goes awry with an order that they can get help.

Including your web address, support email and phone number is a powerful way to reassure clients that your business is legitimate and trustworthy.

And, no packaging is complete without branding elements to help customers identify who your business is and what you’re about. This should include your company’s logo, identifying brand colors and any other small visual elements your brand may use.

Finally, make sure to follow the FDA guidelines for dietary supplement labels.

Your content checklist for product packaging

Include the essential details
- What’s inside?
- How much?
- What’s the potency and dosage?
- When does it expire?
- What’s the lot number?
Include reassuring qualifiers that your audience will value
- Organic, CO2-Extracted, Full Spectrum, Contains Less Than 0.3% THC, etc.
Include your company’s contact info
- Web Address
- Customer Support Email
- Customer Support Phone number
Include your visual branding elements
- Logo
- Tagline
- Brand Colors
- Small branded graphic elements

Keep the Packaging Design Simple

Clean, simple design is reassuring and inspires trust.

Image courtesy of Receptra Naturals

That’s because simple design makes it easy for customers to find what they need or want to know.

It’s easy to miss information in a cluttered design – and people know this.

People naturally mistrust the dense chunks of text at the bottom of many advertisements and product packages. On the other hand, clean, easy-to-read fonts and plenty of white space ensure that your audience can read your product packaging and find the information they want quickly without too much trouble.

With fewer words and graphics competing for attention, the important stuff naturally stands out. And, a simple design also sends the message that there are no hidden loopholes or secrets that may work against your customers.

Keep the Design Of Your Product Packaging Professional

It doesn’t matter how great your product is if your business comes across as unprofessional. And, for medical cannabis businesses, the bar for establishing professionalism is even higher than for most companies.

Keep these tips in mind to communicate professionalism and reliability.

Image courtesy of Sagely Naturals

Make sure your packaging is error-free

Mistakes don’t look professional. How many times have you wondered how an error could have passed through so many hands unnoticed that it made it onto the final version?

Consumers notice errors in your packaging design. They see typos and often, discover incorrect or misleading information. Errors make customers think that your business is incompetent. Or worse – they might think that your business is deliberately misleading them. Make sure you proof-read everything before your packaging goes to production.

Showcase Your Cannabis Products Well Against Competitors

People buying your cannabis products will have other options. Don’t ignore your competition and be sure to understand how other dietary supplements and medicine is packaged.

Want to build trust by encouraging consumers to group your CBD products with other trusted medical brands? Follow these tips:

Provide a list of ingredients and instructions for safe dosing and usage. People expect this from reputable medicinal brands. Your product packaging should dothis too. And, remember to follow the FDA’s labeling requirements for dietary supplements.
Incorporate a safety seal into your packaging design. You’ll notice that most medicines, vitamins, and supplements have a safety seal to protect the contents. Whether you opt for a shrink-wrapped seal over the lid or a foil seal under the cap, adding a safety seal shows that your product has not been tampered with and implies that it’s safe to use.

Incorporating these elements will create a mental link between your product and other trusted medicinal products.

Be authentic to your cannabis brand

Last, but not least, your packaging design must align with your brand. When consumers sense a disconnect between the brand identity they’ve come to identify with your business and the packaging design for your products, it creates discomfort.

Image courtesy of Direct Cannabis Network

But packaging that is in line with (or expands upon) the brand identity consumers have come to know will create comfort and trust.

Kevin Keating at PKG Brand Design explains:

Your brand’s packaging design must reflect your company’s story, product, and values. If your packaging claims a “simple” snack product with dozens of ingredients, consumers are going to be left with a disingenuous feeling about your products and company. By ensuring that your messaging, design, and visual impact is in line with your company and your consumer’s preferences, you can build instant trust.

So, ensure that your packaging design is consistent with your existing visual identity. This includes the name of your business or cannabis product, your cannabis business logo, website, and marketing design.

A united and cohesive visual brand presence looks professional and helps to build familiarity – which is key to developing trust. Ultimately, many people judge products based solely on the product packaging. That’s why it’s essential to make sure your product packaging sends the right message.

August 22, 2018

Food Safety Consortium To Address Cannabis Safety, Edibles Manufacturing

By Aaron G. Biros

1 Comment

The 6^thAnnual Food Safety Consortium Conference & Expo will feature an entire track dedicated to cannabis. As announced in May of this year, the Cannabis Quality series will feature presentations by subject matter experts in the areas of regulations, edibles manufacturing, cannabis safety & quality as well as laboratory testing.

The Food Safety Consortium is hosted by our sister publication, Food Safety Tech, and the Cannabis Quality series will be co-hosted by Cannabis Industry Journal. A number of cannabis-focused organizations will participate in the series of talks, which are designed to help attendees better understand the cannabis edibles market, regulations surrounding the industry and standards for manufacturers. Some highlights include the following:

Ben Gelt, board chairman at the Cannabis Certification Council (CCC), will moderate a panel where leaders in the edibles market discuss supply chain, production and other difficulties in manufacturing infused products. Panelists include Leslie Siu, Founder/CEO Mother & Clone, Jenna Rice, Director of Operations at Gron and Kristen Hill, MIP Director, Native Roots Dispensary, among others. “The Cannabis Certification Council believes consumer education campaigns like #Whatsinmyweed are critical to drive standards and transparency like we see in food,” says Gelt. “What better place to discuss the food safety challenges the cannabis industry faces than the Food Safety Consortium”
Radojka Barycki, CEO of Nova Compliance, will discuss the role of food safety in the cannabis industry and identify some biological and chemical hazards in cannabis product testing in her talk, “Cannabis: A Compliance Revolution.”
Larry Mishkin, counsel to Hoban Law Group and partner at the law firm, Silver & Mishkin, which serves cannabis businesses in Illinois, will provide insights during the conference.
Cameron Prince, vice president of regulatory affairs at The Acheson Group, will help attendees better understand key market indicators and current trends in edibles manufacturing during his talk on November 15. “With the current trend of legalizing cannabis edibles, medicinal and recreational suppliers alike are looking to quickly enter the edibles market,” says Prince. “Understanding the nuances of moving to food production relative to food safety, along with navigating the food industry’s regulatory environment will be critical to the success of these companies.”
Tim Lombardo and Marielle Weintraub, both from Covance Food Solutions, will identify common pathogens and areas where cross contamination can occur for edibles manufacturers.

The Food Safety Consortium will be held November 13–15 in Schaumburg, Illinois (just outside of Chicago). To see the full list of presenters and register for the conference, go the Food Safety Consortium’s website.

August 7, 2018

From The Lab

Quality Plans for Lab Services: Managing Risks as a Grower, Processor or Dispensary, Part 4

By Dr. Edward F. Askew

No Comments

In the last three articles, I discussed the laboratory’s responses or defenses used to reply to your questions about laboratory results that place stress on the success of your business. The Quality Control (QC) results can cause this stress if they are not run correctly to answer the following questions:

Are the laboratory results really true?
Can the laboratory accurately analyze sample products like my sample?
Can the laboratory reproduce the sample results for my type of sample?

Now let’s discuss the most important QC test that will protect your crop and business. That QC sample is the Matrix Sample. In the last article in this series, you were introduced to many QC samples. The Matrix Sample and Duplicate were some of them. Take a look back at Part 3 to familiarize yourself with the definitions.

The key factors of these QC sample types are:

Your sample is used to determine if the analysis used by the laboratory can extract the analyte that is being reported back to you. This is performed by the following steps:
1. Your sample is analyzed by the laboratory as received.
2. Then a sub-sample of your sample is spiked with a known concentration of the analyte you are looking for (e.g. pesticides, bacteria, organic chemicals, etc.).
3. The difference between the sample with and without a spike indicates whether the laboratory can even find the analyte of concern and whether the percent recovery is acceptable.
4. Examples of failures are from my experiences:
  1. Laboratory 1 spiked a known amount of a pesticide into a wastewater matrix. (e.g. Silver into final treatment process water). The laboratory failed to recover any of the spiked silver. Therefore the laboratory results for these types of sample were not reporting any silver, but silver may be present. This is where laboratory results would be false negatives and the laboratory method may not work on the matrix (your sample) correctly. .
  2. Laboratory 2 ran an analysis for a toxic compound (e.g. Cyanide in final waste treatment discharge). A known amount of cyanide was spiked into a matrix sample and 4 times the actual concentration of that cyanide spike was recovered. This is where laboratory results would be called false positives and the laboratory method may not work on the matrix (your sample) correctly.
Can the laboratory reproduce the results they reported to you?
1. The laboratory needs to repeat the matrix spike analysis to provide duplicate results. Then a comparison of the results from the first matrix spike with its duplicate results will show if the laboratory can duplicate their test on your sample.
  1. If the original matrix spike result and the duplicate show good agreement (e.g. 20% relative percent difference or lower). Then you can be relatively sure that the result you obtained from the laboratory is true.
  2. But, if the original matrix spike result and the duplicate do not show good agreement (e.g. greater than 20% relative percent difference). Then you can be sure that the result you obtained from the laboratory is not true and you should question the laboratory’s competence.

Now, the question is why a laboratory would not perform these matrix spike and duplicate QC samples? Well, the following may apply:

These matrix samples take too much time.
These matrix samples add a cost that the laboratory cannot recover.
These matrix samples are too difficult for the laboratory staff to perform.
Most importantly: Matrix samples show the laboratory cannot perform the analyses correctly on the matrix.

So, what types of cannabis matrices are out there? Some examples include bud, leaf, oils, extracts and edibles. Those are some of the matrices and each one has their own testing requirements. So, what should you require from your laboratory?

The laboratory must use your sample for both a matrix spike and a duplicate QC sample.
The percent recovery of both the matrix spike and the duplicate will be between 80% and 120%. If either of the QC samples fail, then you should be notified immediately and the samples reanalyzed.
If the relative percent difference between the matrix spike and the duplicate will be 20% or less. If the QC samples fail, then you should be notified immediately and the samples should be reanalyzed.

The impact of questionable laboratory results on your business with failing or absent matrix spike and the duplicate QC samples can be prevented. It is paramount that you hold the laboratory responsible to produce results that are representative of your sample matrix and that are true.

The next article will focus on how your business will develop a quality plan for your laboratory service provider with a specific focus on the California Code Of Regulations, Title 16, Division 42. Bureau Of Cannabis Control requirements.

May 31, 2018

Hazard Analysis and Critical Control Points (HACCP) for the Cannabis Industry: Part 4

By Kathy Knutson, Ph.D.

No Comments

In Part 3 of this series on HACCP, Critical Control Points (CCPs), validation of CCPs and monitoring of CCPs were defined. When a HACCP plan identifies the correct CCP, validates the CCP as controlling the hazard and monitors the CCP, a potential hazard is controlled in the manufacturing and packaging of cannabis-infused edibles. The food industry is big on documentation. If it’s not documented, it did not happen. The written hazard analysis, validation study and monitoring of CCPs create necessary records. It is these records that will prove to a customer, auditor or inspector that the edible is safe. Here in Part 4, more recordkeeping is added on for deviation from a CCP, verification and a recall plan.

Take Corrective Action When There Is a Deviation from a Critical Control Point

Your food safety team conducts a hazard analysis, identifies CCPs and decides on monitoring devices, frequency and who is responsible for monitoring. You create an electronic or paper record of the monitoring for every batch of edible to document critical limits were met. Despite all your good efforts, something goes wrong. Maybe you lose power. Maybe the equipment jams. Nothing is perfect when dealing with ingredients, equipment and personnel. Poop happens. Because you are prepared before the deviation, your employees know what to do. With proper training, the line worker knows what to do with the equipment, the in-process product and who to inform. In most cases the product is put on hold for evaluation, and the equipment is fixed to keep running. The choices for the product include release, rework or destroy. Every action taken needs to be recorded on a corrective action form and documents attached to demonstrate the fate of the product on hold. All the product from the batch must be accounted for through documentation. If the batch size is 100 lb, then the fate of 100 lb must be documented.

Verify Critical Control Points Are Monitored and Effective

First, verification and validation are frequently confused by the best of food safety managers. Validation was discussed as part of determining CCPs in Part 3. Validation proves that following a CCP is the right method for safety. I call validation, “one and done.” Validation is done once for a CCP; while verification is ongoing at a CCP. For example, the time and temperature for effective milk pasteurization is very well known and dairies refer to the FDA Pasteurized Milk Ordinance. Dairies do not have to prove over and over that a combination of time and temperature is effective (validation), because that has been proven.

I encourage you to do as much as you can to prepare for a recall.A CCP is monitored to prove the safety parameters are met. Pasteurization is an example of the most commonly monitored parameters of time and temperature. At a kill step like pasteurization, the employee at that station is responsible for accurate monitoring of time and temperature. The company managers and owners should feel confident that CCPs have been identified and data are being recorded to prove safety. Verification is not done by the employee at the station but by a supervisor or manager. The employee at the station is probably not a member of the food safety team that wrote the HACCP plan, but the supervisor or manager that performs verification may be. Verification is proving that what was decided by the food safety team is actually implemented and consistently done.

Verification is abundant and can be very simple. First, every record associated with a CCP is reviewed by a supervisor or manager, i.e. someone who did not create the record. This can be a simple initial and date at the bottom of the record. Every corrective action form with its associated evaluation is verified in the same way. When HACCP plans are reviewed, that is verification. Verification activities include 1) testing the concentration of a sanitizer, 2) reviewing Certificates of Analysis from suppliers, 3) a review of the packaging label and 4) all chemical and microbiological testing of ingredients and product. The HACCP plan identifies CCPs. Verification confirms that implementation is running according to the plan.

Verification is like a parent who tells their child to clean their room. The child walks to their room and later emerges to state that the room is clean. The parent can believe the word of the child, if the child has been properly trained and has a history of successfully cleaning their room. At some frequency determined by the parent, the room will get a parental visual check. This is verification. In the food industry, CCP monitoring records and corrective action must be reviewed within seven days after the record is created and preferably before the food leaves the facility. Other verification activities are done in a timely manner as determined by the company.

Food processing and sanitation — Product recalls due to manufacturing errors in sanitation cause mistrust among consumers.

Write a Recall Plan

In the food industry, auditors and FDA inspectors require a written recall plan. Mock recalls are recommended and always provide learning and improvement to systems. Imagine your edible product contains sugar, and your sugar supplier notifies you that the sugar is recalled due to glass pieces. Since you are starting with the supplier, that is one step back. Your documentation of ingredients includes lot numbers, dates and quantity of sugar.You keep good records and they show you exactly how much of the recalled lot was received. Next you gather your batch records. Batches with the recalled sugar are identified, and the total amount of recalled sugar is reconciled. You label every batch of your edible with a lot code, and you identify the amount of each affected lot and the customer. You have a press release template in which you add the specific information about the recall and affected lots. You notify every customer where the affected edible was shipped with a plan to return or destroy the edible. When you notify your customers, you go one step forward.

How would your company do in this situation? I have witnessed the difficulties a company faces in a recall when I was brought in to investigate the source of a pathogen. Food safety people in my workshops who have worked through a recall tell me that it was the worst time of their life. I encourage you to do as much as you can to prepare for a recall. Here are two good resources:

Chapter 15 in the Participant Manual of the Preventive Controls for Human Food rule Warning! The manual is over 500 pages, so be careful what you print. It can be purchased for only $30 by following the link to the bookstore.

The Food Recall Manual of the University of Florida Extension Another warning! The manual is 134 pages.

Please comment on this blog post below. I love feedback!

May 16, 2018

Cannabis Track Added to 2018 Food Safety Consortium

By Cannabis Industry Journal Staff

No Comments

The 6^thAnnual Food Safety Consortium Conference & Expo has announced a series of talks focused on cannabis. In addition to the categories such as Operations, Detection, Compliance and Supply Chain, the Call for Abstracts now includes a fifth category in this year’s program: Cannabis Quality.

The Cannabis Quality series will feature presentations by subject matter experts in the areas of regulations, edibles manufacturing, cannabis safety & quality as well as laboratory testing. The Food Safety Consortium itself is hosted by our sister publication, Food Safety Tech, but the Cannabis Quality series will be co-hosted by Cannabis Industry Journal as well.

Rick Biros, President/Publisher, Innovative Publishing Co. LLC — Rick Biros, conference director of the Food Safety Consortium

Citing the need to address safety in a burgeoning market, Rick Biros, conference director, believes education is key to helping the cannabis industry mature. “As the cannabis industry evolves, so does the need to protect the consumer,” says Biros. “Just as we protect the safety of our food supply chain, it is important to educate the cannabis industry about protecting their supply chain from seed to sale. Through these educational talks, we want to help bridge that gap, hosting a forum for those in the cannabis industry to interact with food safety professionals.”

The 2018 Food Safety Consortium Conference & Expo will be held November 14–16 in Schaumburg, Illinois. The event is a top food safety conference that features Food Safety and Quality Assurance (FSQA) industry experts and government officials.

The conference focuses on food safety education and networking, providing attendees information on best practices and new technology solutions to today’s food safety challenges. Previous keynote speakers have included food safety leaders such as Stephen Ostroff, M.D., deputy commissioner for Foods and Veterinary Medicine, U.S. Food and Drug Administration and Frank Yiannis, vice president of Food Safety at Walmart and author of Food Safety Culture: Creating a Behavior-Based Food Safety Management System.

Before submitting an abstract, following are a few points to keep in mind:

The abstract should be about 300 words
Presentations will be judged on educational value
Don’t submit a sales pitch!
Presentation time is about 45 minutes—this includes a 10-15 Q&A session

To see the Call for Abstracts and submit a presentation for consideration, click here. The deadline for submissions is May 31^,2018. The conference will notify everyone who submits an abstract on the status of acceptance by June 15.

May 2, 2018

Soapbox

Automation – Planning is Everything

By Vince Sebald

No Comments

Automation of processes can provide great benefits including improved quality, improved throughput, more consistency, more available production data, notifications of significant events and reduced costs. However, automation can also be expensive, overwhelm your workforce, cause future integration problems and magnify issues that you are currently experiencing. After all, if a machine can do work 100 times faster than a human, it can also produce problems 100 times faster than a human. Whether it is a benefit or a scourge depends largely on the implementation process.

There are thousands of possible technology solutions for just about any production problem. The trick to getting results that will work for your company is to use good engineering practices starting from the beginning. Good engineering practices are documented in various publications including ISPE Baseline Guides, but there are common threads among all such guides. What will the system be used for and what problem is it intended to solve?

The key is implementing a system that is fit for your intended use. As obvious as it sounds, this is often the most overlooked challenge of the process. In the grand scheme of things, it is a MUCH better proposition to spend more time planning and have a smooth operation than implement a system quickly and fight it because it isn’t a good fit for the intended use. The industry is littered with systems that were prematurely implemented and complicate rather than simplify operations. Planning is cheap, but fixing is expensive.

The most important step to getting an automated system that will work for you is also the first:

Defining “what” you need the system to do: User Requirements

Automation Runaway — Once automation is in place, it can be a boon to production, but don’t let your systems get ahead of your planning! It can be difficult to catch up.

With decades of experience in the automation industry, I have seen systems in many industries and applications and it is universally true that the definition of requirements is key to the success of the automation adventure. To clarify, the user requirements are intended to define “what” the system is required to do, rather than “how” it will do it. This means that persons that may not be familiar with the automation technologies can still be (and usually are) among the most important contributors to the user requirements document. Often, the people most familiar with the task that you wish to automate can contribute the most to the User Requirements document.

Some of the components of a User Requirements document typically include:

Purpose: What will the system be used for and what problem is it intended to solve?
Users: Who will be the users of the system and what is their relevant experience?
Integration: Is the system required to integrate into any existing or anticipated systems?
Regulatory Requirements: Is the system required to meet any regulatory requirements?
Functions: What is the system required to do? This may include operating ranges, operator interface information, records generation and storage, security, etc.
Performance: How many units per hour are required to process? What percent non-conforming product is acceptable?
Environment: What environment is the system required to operate in? Indoor, outdoor, flammable, etc.
Documentation: What documentation is required with the system to support ongoing maintenance, calibration, etc.?
Warranties/Support: Will you perform work in-house, or will the manufacturer support the system?

The level of detail in the User Requirements should be scaled to the intended use. More critical operations may require more detailed and formal User Requirements. At a minimum, the User Requirements could be a punch list of items, but a detailed User Requirements may fill binders. The important thing is that you have one, and that the stakeholders in the operation have been involved in its production and approval.Once completed, the User Requirements can be a very good document to have for prospective providers of solutions to focus their attention on what is important to you, the customer.

Equally important to the process is the idea of not over-constraining the potential solutions by including “how” the system will meet the requirements within the User Requirements. If it is required to use specific technologies for integration with other existing systems, it is appropriate to include that information in the User Requirements. However, if use of a particular technology (e.g. “wireless”) is not required, the inclusion may unnecessarily eliminate viable design options for systems that may address the requirements.

Once completed, the User Requirements can be a very good document to have for prospective providers of solutions to focus their attention on what is important to you, the customer. This helps to ensure that they focus their efforts in the areas that match your needs and they don’t waste resources (which translate to your costs) in areas that don’t have tangible benefits to you, the customer. It also gives you a great tool to “value engineer”, meaning that you can consider cutting design options that do not support the User Requirements, which can reduce project costs and timelines, keeping things lean and on track.

Further steps in the project are built around the User Requirements including system specifications provided by vendors, testing documentation and the overall turnover package. An appropriately scaled User Requirements document is a low cost, easy way to ensure that your automated system will serve you well for years to come. Alternatively, the lack of a User Requirements document is an all-too-common indicator that there may be challenges ahead including scope creep, missed deadlines and unacceptable long term performance.

Feel free to reach Vince at vjs@sebaldconsulting.com with any questions you might have.

April 24, 2018

Curaleaf Florida Earns SQF Certification

By Aaron G. Biros

1 Comment

Last week, Curaleaf, a medical cannabis producer and processor in Miami, Florida, announced they have earned the Safe Quality Food (SQF) Level II certification. In the press release, they claim they are the first and only medical cannabis company in the state to achieve that certification.

That SQF certification is a program recognized by the Global Food Safety Initiative (GFSI), which is a global collaborative effort to get food companies practicing food safety management on the same high quality standards around the world. GFSI is a major international food quality and safety program where some of the largest food manufacturers and processors in the world participate.

Curaleaf’s products include a line of low-THC and full strength medical cannabis products. They have dispensaries in Miami, Lake Worth, Fort Myers and St. Petersburg, as well as delivery of products from Jacksonville south to Key West.

According to Lindsay Jones, president of Curaleaf Florida, patients ask frequently about the level of safety of cannabis products. “Every day patients express interest and assurance of wanting to know that the foods and medicines they consume are safe and of the best quality available,” says Jones. “This SQF Level II certification that Curaleaf has earned is particularly important for patients and demonstrates that our medical marijuana processing expertise delivers superior quality products for patients in need across Florida.”

Florida’s regulations on medical cannabis producers and processors actually require a form of certification demonstrating proper food safety protocols. “Within 12 months after licensure, a medical marijuana treatment center must demonstrate to the department that all of its processing facilities have passed a Food Safety Good Manufacturing Practices, such as Global Food Safety Initiative or equivalent, inspection by a nationally accredited certifying body,” reads Rule 9 in the 2017 Florida Statute. Edibles producers in Florida “must hold a permit to operate as a food establishment pursuant to chapter 500, the Florida Food Safety Act, and must comply with all the requirements for food establishments pursuant to chapter 500 and any rules adopted thereunder.” The rules also lay out requirements for packaging, dosage and sanitation rules for storage, display and dispensing of edible products.

Looking at SQF Level II certification and GFSI could be a step in the right direction for many cannabis infused product manufacturers, as they are some of the more recognized programs in the food industry.

April 12, 2018

Hazard Analysis and Critical Control Points (HACCP) for the Cannabis Industry: Part 2

By Kathy Knutson, Ph.D.

2 Comments

HACCP is a food safety program developed in the 1960s for the food manufacturing industry, mandated for meat, seafood and juice and adopted by foodservice for the safe serving of meals at restaurants. With state requirements for the safe production of cannabis-infused products, namely edibles, facilities may be inspected against HACCP principles. The cannabis industry and state inspectors recognize the need for safe edible manufacture. Lessons can be learned from the food industry, which has advanced beyond HACCP plans to food safety plans, starting with procurement and including the shipment of finished product to customers.

In my work with the food industry, I write HACCP and food safety plans and deliver training on food safety. In Part 1 of this series, I wrote about the identification of hazards, which is the first step in HACCP plan development. Before we continue with the next HACCP step, I will discuss Good Manufacturing Practices (GMPs). GMPs are the foundation on which HACCP is built. In other words, without GMPs in place, the facility will not have a successful HACCP program. GMPs are required in the food, dietary supplement and pharmaceutical industries, all under the enforcement of the federal Food and Drug Administration (FDA). Without federal regulation for cannabis edible manufacture, there may not be state-mandated requirements for GMPs. Let me warn you that any food safety program will not succeed without proper control of GMPs.

GMPs cover all of your programs and procedures to support food safety without having a direct, instant control. For example, when brownies are baked as edibles, food safety is controlled by the time and temperature of baking. A written recipe and baking procedure are followed for the edible. The time and temperature can be recorded to provide documentation of proper baking. In the food industry, this is called a process preventative control, which is critical to food safety and is part of a HACCP plan. Failure of proper time and temperature of baking not only leads to an unacceptable product in terms of quality, but results in an unsafe product that should not be sold.

Back to GMPs. Now think of everything that was done up to the steps of mixing and baking. Let’s start with personnel. Facilities for edibles have hiring practices. Once an employee is hired, the employee is trained, and training will include food safety procedures. When working at the job after training, the employee measuring ingredients will demonstrate proper grooming and hand washing. Clean aprons, hairnets, beard nets and gloves will be provided by the facility and worn by the employee. The same goes for the employee that bakes and the employee that packages the edible. One category of GMPs is Personnel.

Edibles facilities are not foodservice; they are manufacturing. A second GMP category is cleaning and sanitizing. Food safety is controlled through proper cleaning and sanitizing of food contact surfaces (FCS). The edible facility will have in place the frequency and methods for cleaning all parts of the facility- outside, offices, restrooms, break room and others. GMPs cover the general cleaning procedures and procedures for cleaning receiving, storage; what we would consider processing to include weighing, process steps and packaging; finished product storage and shipping. Management of the facility decides the methods and frequency of cleaning and sanitizing with greater care given to processing. Without proper cleaning and sanitizing, a facility cannot achieve food safety.

I could go on and on about GMPs. Other GMPs include water safety, integrity of the buildings, pest control program, procurement, sewage disposal and waste disposal. Let’s transition back to HACCP. In Part 1 of this series, I explained identification of hazards. Hazards are one of three types: biological, chemical and physical.

At this point, I am not surprised if you are overwhelmed. After reading Part 1 of this series, did you form a food safety team? At each edibles facility, there should be at least one employee who is trained externally in food safety to the standard that foodservice meets. Classes are offered locally and frequently. When the facility is ready, the next step of training is a HACCP workshop for the food industry, not foodservice. Edibles facilities are not foodservice; they are manufacturing. Many colleges and associations provide HACCP training. Finally, at the least, one employee should attend a workshop for Preventive Controls Qualified Individual.

To institute proper GMPs, go to ConnectFood.com for a GMP checklist. Did you draw up a flow diagram after reading Part 1? With a flow diagram that starts at Receiving and ends at Shipping, the software at ConnectFood.com takes you through the writing steps of a HACCP or food safety plan. There are many resources out there for GMPs, so it can get overwhelming. ConnectFood.com is my favorite resource.

The next step in HACCP development after identification of hazards is to identify the exact step where the hazard will be controlled. Strictly speaking, HACCP only covers process preventive controls, which typically start with a weigh step and end with a packaging step. A facility may also have a step where temperature must be controlled for food safety, e.g. cooling. In HACCP, there are commonly two process preventive controls:

Biological hazard of Salmonella and Escherichia coli: the heat step
Physical hazard of metal: metal detector

Strictly speaking, HACCP does not include cleaning, sanitizing and supplier approval for procurement of ingredients and packaging. I hope you see that HACCP is not enough. There have been hundreds of recalls and outbreaks due to problems in non-processing steps. The FDA requires food manufactures to go beyond HACCP and follow a written food safety plan, which includes hazards controlled at these steps:

Biological hazard of Listeria monocytogenes: cleaning and sanitizing of the processing environment and equipment
Physical hazards coming in with ingredients: supplier approval
Physical hazard of glass and hard plastic: Here I am thinking of glass breaking or plastic pieces flying off buckets. This is an internal hazard and is controlled by following written procedures. The written document is a Standard Operating Procedure (SOP).
Chemical hazard of pesticides: supplier approval
Chemical hazard of mycotoxins: supplier approval
Chemical hazard of allergens: supplier approval, label check at Receiving and product labeling step

Does a cannabis edible facility honestly not care or not control for pesticides in ingredients because this is not part of HACCP? No. There are two ways for procurement of ingredients in which pesticides are controlled. Either the cannabis cultivation is controlled as part of the samebusiness or the facility works with a supplier to confirm the ingredient meets pesticide tolerances. Strictly speaking, this control is not part of HACCP. For this and many other reasons, HACCP is a good place to start the control of food safety when built on a solid foundation of GMPs. In the same way the food industry is required to go beyond HACCP with a food safety plan, the cannabis industry must go beyond HACCP.

My thoughts will be shared in a webinar on May 2^ndhosted by CIJ and NEHA. I encourage you to listen in to continue this discussion.Please comment on this blog post below. I love feedback!

March 28, 2018

Environmental Controls: The Basics

By Vince Sebald

No Comments

The outside environment can vary widely depending on where your facility is located. However, the internal environment around any activity can have an effect on that activity and any personnel performing the activity, whether that’s storage, manufacturing, testing, office work, etc. These effects can, in turn, affect the product of such activities. Environmental control strategies aim to ensure that the environment supports efforts to keep product quality high in a manner that is economical and sensible, regardless of the outside weather conditions.

For this article, let us define the “environment” as characteristics related to the room air in which an activity is performed, setting aside construction and procedural conditions that may also affect the activity. Also, let us leave the issue of managing toxins or potent compounds for another time (as well as lighting, noise, vibration, air flow, differential pressures, etc). The intent here is to focus on the basics: temperature, humidity and a little bit on particulate counts.

Temperature and humidity are key because a non-suitable environment can result in the following problems:

Operator discomfort
Increased operator error
Difficulty in managing products (e.g. powders, capsules, etc)
Particulate generation
Degradation of raw materials
Product contamination
Product degradation
Microbial and mold growth
Excessive static

USP <659> “Packaging and Storage Requirements” identifies room temperature as 20-25°C (68-77 °F) and is often used as a guideline for operations. If gowning is required, the temperature may be reduced to improve operator comfort. This is a good guide for human working areas. For areas that require other specific temperatures (e.g. refrigerated storage for raw materials), the temperature of the area should be set to those requirements.

Humidity can affect activities at the high end by allowing mold growth and at the low end by increasing static. Some products (or packaging materials) are hydroscopic, and will take on water from a humid environment. Working with particular products (e.g. powders) can also drive the requirement for better humidity control, since some powders become difficult to manage in either high or low humidity environments. For human operations without other constraints, a typical range for desirable humidity is in the range of 20 to 70% RH in manufacturing areas, allowing for occasional excursions above. As in the case of temperature, other requirements may dictate a different range.

In a typical work environment, it is often sufficient to control the temperature, while allowing the relative humidity to vary. If the humidity does not exceed the limits for the activity, then this approach is preferred, because controlling humidity adds a level of complexity (and cost) to the air handling. If humidity control is required, it can be managed by adding moisture via various humidification systems, or cooling/reheating air to remove moisture. When very low humidity is required, special equipment such as a desiccant system may be required. It should be noted that although you can save money by not implementing humidity control at the beginning, retrofitting your system for humidity control at a later time can be expensive and require a shutdown of the facility.

Good engineering practice can help prevent issues that may be caused by activities performed in inappropriately controlled environments. The following steps can help manage the process:

Plan your operations throughout your facility, taking into account the requirements for the temperature and humidity in each area and know what activities are most sensitive to the environment. Plans can change, so plan for contingencies whenever possible.
Write down your requirements in a User Requirement Specification (URS) to a level of detail that is sufficient for you to test against once the system is built. This should include specific temperature and RH ranges. You may have additional requirements. Don’t forget to include requirements for instrumentation that will allow you to monitor the temperature and RH of critical areas. This instrumentation should be calibrated.
Solicit and select proposals for work based on the URS that you have generated. The contractor will understand the weather in the area and can ensure that the system can meet your requirements. A good contractor can also further assist with other topics that are not within the scope of this article (particulates, differential pressures, managing heating or humidity generating equipment effects, etc).
Once work is completed, verify correct operation using the calibrated instrumentation provided, and make sure you add periodic calibration of critical equipment, as well as maintenance of your mechanical system(s), to your calibration and maintenance schedules, to keep everything running smoothly.

The main point is if you plan your facility and know your requirements, then you can avoid significant problems down the road as your company grows and activity in various areas increases. Chances are that a typical facility may not meet your particular requirements, and finding that out after you are operational can take away from your vacation time and peace of mind. Consider the environment, its good business!