Tag Archives: IEC

ANAB Accredits ABKO Labs

By Cannabis Industry Journal Staff
No Comments

The ANSI National Accreditation Board (ANAB) accredited ABKO Labs, LLC, to ISO/IEC 17025. ABKO Labs is a cannabis and hemp testing laboratory based in Warren, Michigan.

According to the press release, ABKO Labs achieved ISO/IEC 17025 accreditation in Michigan with the help of ANAB. The lab earned the accreditation in general requirements for the competence of testing labs, demonstrating competence in chemistry in microbiology.

“We are very proud of our accomplishments in the cannabis lab space in Michigan and we look forward to continuing to offer accurate and prompt results,” says Amy Brown, CEO of ABKO Labs, LLC.

Cannabis Testing Laboratories (CTL) Becomes First ISO-Accredited Hemp Lab in Nebraska

By Cannabis Industry Journal Staff
No Comments

In a press release published last week, Cannabis Testing Laboratories (CTL) announced they have achieved ISO 17025 accreditation as part of the Nebraska Department of Agriculture requirements for cannabis labs operating in the state. CTL is a wholly-owned subsidiary of Doane University, a liberal arts college in Crete, Nebraska.

Dr. Arin Sutlief (in back) and Dr. Andrea Holmes preparing samples for cannabinoid analysis by HPLC.

According to the press release, CTL will be renting space on Doane University’s campus for its primary laboratory. Doane University is working on an effort to foster innovation where they create spaces on campus for entrepreneurial startups. Dr. Andrea Holmes, Director of Cannabis Studies and Professor of Chemistry at Doane University, is the founder of CTL.  Dr. Arin Sutlief is the director of the laboratory as well, which means CTL is led by an all-female management team.

Dr. Holmes says hemp testing should be a priority for the state’s new industry. “Being the first ISO-accredited and state approved cannabis testing laboratory in Nebraska will allow farmers, processors, vendors, and even consumers of CBD and hemp products to have local access to high-quality and reliable testing,” says Dr. Holmes. “For farmers, continuous testing is of utmost importance so they don’t grow hemp over 0.3% total THC levels, at which point hemp is categorized as marijuana, which is currently illegal in Nebraska. Consumers of CBD products will also benefit from private testing as oftentimes CBD-infused products don’t actually contain what the label says.”

Hemp weighed for sample preparation for cannabinoid analysis by HPLC.

CTL will operate independently of the university, but the lab will be a resource for faculty and students. There will be internship and experiential learning opportunities available at the lab for students. In addition to that, the lab will also help faculty that teach cannabis-related courses.

Last year, Doane University announced the launch of their Professional Cannabis Certificate Program. In June of this year, the university expanded their course offerings in cannabis, with seven courses available this fall. The addition of CTL to the Crete, Nebraska campus will benefit those new courses and provide more resources to those in the certificate program.

“I am proud to be one of the creators of a fully accredited cannabis testing lab that provides our farmers and processors reliable and quick local testing of hemp,” says Dr. Sutlief. “CTL is among the first ISO-certified cannabis testing labs in the U.S. that is a subsidiary of a university. Innovation, research, entrepreneurship and education will be the central pillars of CTL as we set ourselves apart to become leaders in cannabis testing not only in Nebraska and the Midwest but also nationally.”

Deibel Bioscience Rebrands, Achieves ISO 17025 Accreditation

By Cannabis Industry Journal Staff
No Comments

On June 19, Charles Deibel, president and CEO of Deibel Bioscience, announced two important changes to his cannabis testing laboratory: First, they changed their name from Deibel Laboratories to Deibel Bioscience. Secondly, they achieved ISO/IEC 17025:2017 accreditation.

Deibel Labs is an internationally recognized corporation of 15 testing labs in North America that’s been around for about 50 years, serving the food, beverage and personal care industries. Starting in 2018, Deibel has ventured into the cannabis and hemp markets, and recently rebranded these labs as “Deibel Bioscience.” Currently, Deibel Bioscience operates in California and Illinois, with plans underway to open labs in Florida and Pennsylvania.

Charles Deibel, President & CEO of Deibel Bioscience

Deibel’s brand is very well known in the food testing industry and has recently become a prominent voice and industry advocate in the cannabis testing community. Charles Deibel’s father, Dr. Robert Deibel, was a pioneer of the Hazard Analysis and Critical Control Point (HACCP) system. Charles Deibel has a long career in the laboratory testing space and even worked with the Department of Justice to help shape the legal case against Peanut Corporation of America and testified as an expert witness during the trial.

With respect to their accreditation, Deibel Bioscience of California (Santa Cruz) achieved it through the American Association for Laboratory Accreditation (A2LA). The lab’s scope currently holds seven chemical and microbiological test methods as well as their sampling method, with plans to expand their scope to include four more chemical testing methods in the next month.

“At our level of testing services, any lab should be able to offer accurate testing, at a fair price and a reasonable turn-around time,” says Deibel. “These three qualities are no longer defining features; rather it is our high level of service and exceptional Technical Services acumen that set us apart.”

According to Deibel, their company is drawing on decades of experience in other testing industries to provide a high caliber of technical expertise. “We are a family owned and operated corporation and are not constrained by quarterly investor demands. Our size offers economics of scale that is reflected in our service and pricing.”

ACS Laboratory Get Certified for Cannabis Testing in Florida

By Cannabis Industry Journal Staff
No Comments

According to a press release published earlier this week, ACS Laboratory announced the Florida Department of Health Office of Medical Marijuana Use (OMMU) has certified ACS to test products for medical dispensaries in the state.

This certification comes after the Florida Department of Health adopted an emergency rule, requiring dispensaries to only use a certified lab for product testing. Dispensaries (or medical marijuana treatment centers as the state calls them) in Florida have until December 24, 2020 to sell products tested before June 24, 2020.

ACS Laboratory was founded in 2008. They are DEA- and AHCA-licensed, ISO 17025-accredited and CLIA-accredited with the largest testing facility in the eastern United States, according to their press release. They are USDA-compliant and certified by Florida to test hemp in the state and are now also certified to test medical cannabis products.

As a certified cannabis testing lab in Florida, ACS has to meet a list of requirements, similar to rules one might find in other legal states. The Florida rules mandate that labs are ISO-accredited and qualified to accurately test for contaminants, moisture content and cannabinoid potency.

Earlier this year, ACS acquired Botanica Testing, Inc., which added about 500 new hemp and CBD clients to their portfolio. ACS Laboratory now has customers in 44 states.

Moving Towards Greater Competency in Cannabis Testing

By Ravi Kanipayor
No Comments

While legalization of recreational cannabis remains in a fluid state in the United States, the medical application of cannabis is gaining popularity. As such, the  diversification of  pharmaceutical and edible cannabis products will inevitably lead to increased third party testing, in accordance with Food and Drug Administration (FDA) mandates. Laboratories entering into cannabis testing, in addition to knowing the respective state mandates for testing procedures, should be aligned with Federal regulations in the food and pharmaceutical industries.

In 2010, the American Herbal Products Association (AHPA)1 established a cannabis committee with the primary objective of addressing issues related to the practices and safe use of legally-marketed cannabis and cannabis-related products. The committee issued a set of recommendations, outlining best practices for the cultivation, processing, testing and distribution of cannabis and cannabis products. The recommendations for laboratory operations sets some basic principles for those performing analysis of cannabis products. These principles, complementary to existing good laboratory practices and international standards, focus on the personnel, security, sample handling/disposal, data management and test reporting unique to laboratories analyzing cannabis samples.

As local and federal regulations continue to dictate medical and recreational cannabis use, many will venture into the business of laboratory testing to meet the demands of this industry. Thus, it is not surprising that cannabis producers, distributors and dispensaries will need competent testing facilities to provide reliable and accurate results. In addition, our understanding of cannabis from an analytical science perspective will derive from test reports received from these laboratories. Incorrect or falsified results can be costly to their business and can even lead to lawsuits when dealing with consumer products. Examples of fines and/or suspensions related to incorrect/false reporting of results have already gained coverage in news media. This sets up the need for the cannabis industry to establish standardized protocols for laboratory competency.

The international standard, ISO 17025 – ‘General requirements for the competence of testing and calibration laboratories’ – plays an important role in providing standard protocols to distinguish labs with proven quality, reliability and competency. The industry needs to rely not only on the initial accreditation received, but also on the ongoing assessment of the labs to ensure continuous competency.

Receiving accreditation involves an assessment by an International Laboratory Accreditation Cooperation (ILAC) recognized accrediting body, which ensures that laboratories have the competency, resources, personnel and have successfully implemented a sound quality management system that complies with the international standard ISO/IEC 17025:2017. This ISO standard is voluntary, but recognized and adopted globally by many industries for lab services. Cannabis companies can ensure that the test services they receive from accredited laboratories will meet the requirements of the industry, as well as the state and federal regulatory agencies. The International Organization for Standardization (ISO) is an independent, non-governmental organization with over 160 memberships of national standards bodies, and all with a unified focus on developing world-class standards for services, systems, products, testing to ensure quality, safety, efficiency and economic benefits.

ILAC is a non-profit organization made up of accreditation bodies (ABs) from various global economies. The member bodies that are signatories to the ILAC Mutual Recognition Arrangement (ILAC MRA) have been peer evaluated to demonstrate their competence. The ILAC MRA signatories, in turn, assess testing labs against the international standard, ISO/IEC 17025 and award accreditation. Accreditation is the independent evaluation of conformity assessment in accordance with the standard and related government regulations to ensure the lab carry out specific activities (called the ‘Scope’) impartially and competently. Through this process, cannabis industry stakeholders and end users can have confidence in the test results they receive from the labs.

Understanding the principles of accreditation and conformity to ISO standards is the beginning of the ISO 17025 accreditation process. Similar to other areas of testing, accreditation gives cannabis testing labs global recognition such that their practices meet the highest standards in providing continuous consistency, reliability and accuracy.

Many government agencies (state and federal) in the US and around the world are mandating cannabis testing laboratories to seek accreditation to ISO/IEC 17025:2017, in an effort to standardize their practice and provide the industry with needed assurance. Conformance with the standard enables labs to demonstrate their competency in generating reliable results, thereby providing assurance to those who hire their services.

Testing of cannabis can be very demanding and challenging given that state and federal regulations require that the performance and quality of the testing activities must provide consistent, reliable and accurate results. Hence, labs deciding to set up cannabis testing will have to take extra care in setting up a laboratory facility, acquiring all necessary and appropriate testing equipment, hiring qualified and experience staff and developing and implementing test methods to ensure the process, sample throughput, data integrity and generated output are continuously reliable, accurate and meet the need of the clients and requirements of the regulatory bodies. This demands the lab to establish and implement very sound quality assurance program, good laboratory practices and a quality management system (QMS).

Some expected challenges are:

  1. Standardization of test methods and protocols
    1. Since there is no federal guidance in standardization of test methods and protocols for cannabis testing in US, it is challenging for laboratories to research and validate other similar, established methods and gain approval from the local and state authorities.
  2. Facility
    1. Cannabis testing activities must be physically isolated from other testing activities for those labs conducting business in other areas of testing such as environment, food, mining, etc.
    2. Microbiological testing requires additional physical isolation within the testing facility, maintaining sterility of the environment, test area and test equipment.
  3. Equipment
    1. The test equipment such as Chromatographs (GC/LC), Spectrometers (ICP-MS, ICP-OES, UV-Vis), and other essential analytical instruments must meet the specifications required to detect and quantify and statistically justify the test parameters at the stipulated concentration levels. That means the limit of detection and limit of quantitation of each parameter must be well below the regulatory limits and the results are statistically sound.
    2. Calibration, maintenance and operation of analytical equipment must be appropriate to produce results traceable to international standards such as International System of Units and National Institute of Standards and Technology (SI and NIST).
  4. Staff
    1. The qualification and experience of the staff should ensure standard test methods are implemented and verified to meet the specifications.
    2. They should have a sound understanding of the QA/QC protocols and effective implementation of a quality management system which conforms to ISO/IEC 17025:2017 standard.
    3. Staff should be properly trained in all standard operating procedures (SOPs) and receiving schedule re-training as needed. Training should be accurately documented.
  5. QMS
    1. The QMS should not only meet the requirements of ISO 17025, but also be appropriate to the scope of the laboratory activities. Such a system must be planned, implemented, verified and continuously improved to ensure effectiveness.

Finally, stakeholders should seek expert advice in establishing a cannabis testing lab prior to initiating the accreditation. This can be achieved through a cyclic PLAN-DO-CHECK-ACT process. Labs that are properly established can attain the accreditation process in as little as 3-5 months. An initial ‘Gap Analysis’ can be extremely helpful in this matter.

IAS, an ILAC MRA signatory and international accrediting body based in California is one such organization that provides training programs for those interested in attaining accreditation to ISO/IEC 17025:2017. It is a nonprofit, public-benefit corporation that has been providing accreditation services since 1975. IAS accredits a wide range of companies and organizations including governmental entities, commercial businesses, and professional associations worldwide. IAS accreditation programs are based on recognized national and international standards that ensure domestic and/or global acceptance of its accreditations.2


References

  1. American Herbal Products Association , 8630 Fenton Street, Suite 918 , Silver Spring, MD 20910 , ahpa.org.
  2. International Accreditation Services, iasonline.org.

Green Leaf Laboratory Gets First ISO 17025:2017 Accreditation in Oregon

By Cannabis Industry Journal Staff
No Comments

The American Association for Laboratory Accreditation (A2LA) published a press release yesterday announcing the accreditation of Green Leaf Laboratory, a cannabis testing lab based in Portland, Oregon. According to that press release, they are the first cannabis testing lab in the state of Oregon to achieve the ISO 17025:2017 accreditation.

Rowshan Reordan, founder of Green Leaf Laboratory, says they have been a leader in the cannabis market since for more than nine years, since their launch in 2011. “Receiving our ISO/IEC 17025 accreditation, in addition to required state accreditation, affirms our commitment to quality science and leadership in this industry,” says Reordan. “Working with A2LA and being recognized as the first A2LA accredited laboratory in Oregon has been a great experience. We appreciated the thoroughness in their accreditation process and their commitment to excellence. We look forward to a successful future with A2LA and continuing our commitment to leadership and excellence in the industry.”

“We congratulate Green Leaf Laboratories on becoming the first cannabis testing laboratory accredited to ISO/IEC 17025:2017 in the state of Oregon”, says Anna Williams, Accreditation Supervisor at A2LA. “A2LA is excited to see testing laboratories think outside of the box and elect to use our services in states not mandating them.”

PharmLabs Accredited to ISO 17025

By Cannabis Industry Journal Staff
1 Comment

According to a press release emailed today, Perry Johnson Laboratory Accreditation Inc. (PJLA) announced the accreditation of PharmLabs LLC to ISO/IEC 17025. Based in San Diego, California, PharmLabs has four locations, with three in the Southern California region and one in Maui.

PharmLabs offers a very wide variety of services including: California Compliance testing, a specialized Hemp Testing Program, Hemp Biomass Verification testing, and THC-free testing for the state of California. In addition, they offer the testing of cannabinoids, pesticides, residual solvents, microbiological contaminants, mycotoxins, heavy metals, terpenes, water activity, moisture content, and filth/foreign material testing.

“Our experience with [Perry Johnson Laboratory Accreditation] has been incredible over the years. Since we have multiple locations, we have had many visits with PJLA and their knowledge and quick response time has helped us get where we need to be,” says Greg Magdoff, founder of PharmLabs.

According to the press release, PharmLabs has plans to expand throughout the state of California and the rest of the United States in both hemp and cannabis testing in legal states.

North Carolina Gets First Accredited Cannabis Lab

By Cannabis Industry Journal Staff
No Comments

In a press release published on Monday, the American Association for Laboratory Accreditation (A2LA), announced the renewal of accreditation for Global Laboratory Services, Inc. for ISO 17025:2017 in cannabis testing. The laboratory, based in Wilson, North Carolina, becomes first cannabis testing laboratory accredited in that state by adding the industrial hemp testing to their chemical scope of accreditation.

According to Kim Hesse, business development manager at Global Laboratory Services, they plan to expand their services in the hemp market with additional types of hemp testing. “At Global Laboratory Services, we always strive to keep pace with industry needs,” says Hesse. “We saw the need for an accredited laboratory in the hemp industry and therefore added CBD and THC testing to our scope. Our next step is to expand our service offerings to include agrochemical analysis of industrial hemp.”

Adam Gouker, general manager at A2LA, says accreditation plays a vital role in the cannabis industry and its regulatory requirements. “We congratulate Global Laboratory Services on becoming the first cannabis testing laboratory accredited in the state of North Carolina, specifically for industrial hemp,” says Gouker. “A2LA realizes the vital role that accreditation plays in the cannabis industry to support compliance with regulatory requirements, and we are thrilled to see that our service has been adopted in a new state. We look forward to our continued relationship with Global Laboratory Services in the provision of their accreditation needs.”

North Coast Analytical & North Coast Testing Accredited to ISO 17025:2017

By Cannabis Industry Journal Staff
No Comments

According to a press release published earlier this month, the American Association for Laboratory Accreditation (A2LA) announced the accreditation of both North Coast Analytical Laboratories and North Coast Testing Laboratories to ISO 17025:2017 for cannabis testing.

Both labs are located in Streetsboro, Ohio, becoming A2LA’s first accredited labs in the state. North Coast Testing does cannabis testing for Ohio’s medical cannabis industry, whereas North Coast Analytical does testing for the hemp industry.

Carolyn Friedrich, Ph.D., scientific director at North Coast Testing, says they are excited to help ensure the safety of patients for Ohio’s medical cannabis program. “We are extremely proud of the work of our entire team in rapidly developing and implementing a comprehensive quality management program that can give all participants in the Ohio Medical Marijuana Control Program confidence in the quality and safety of products tested in our laboratory,” says Friedrich.

Nick Szabo, laboratory director at North Coast Analytical, says A2LA went “above and beyond at every step, we greatly appreciate their efforts. Our accreditation by A2LA is a testament to our ability to meet the most rigorous quality management standards in analytical testing of hemp products, and a vote of confidence in our team’s ability to perform at the highest levels.”

A2LA Accredits First Labs in Tennessee and Oklahoma

By Cannabis Industry Journal Staff
No Comments

According to a press release published earlier this week, A2LA announced the accreditation of two separate cannabis laboratories in two separate states; both are the first cannabis testing labs accredited in their states. Demeter Laboratory, based in Oklahoma City, Oklahoma, and Galbraith Laboratories, based in Knoxville, Tennessee, achieved the ISO 17025:2017 accreditation.

According to Cassy VanTassel, M.S., quality manager at Demeter Laboratory, Oklahoma is still developing and defining their regulatory framework for cannabis testing requirements. “Even though the State of Oklahoma is still establishing regulations and legislation, Demeter will always strive to meet the highest quality standards, so our customers know they are getting the best quality testing,” says VanTassel. “Demeter chose A2LA as its Accreditation Body due to their reputation in the industry, their diverse clientele, and the quality of their assessors.”

In Tennessee, Galbraith Labs is looking to aid the hemp industry in product safety testing. Christy Myers, customer service manager at Galbraith Laboratories, says they want to help farmers produce safe hemp products. “We are proud of our commitment to stay current within our industry and achieve the high standards set by A2LA,” says Myers. “Adding cannabis testing to our line of services was a great opportunity for Galbraith Laboratories to serve the community by helping farmers produce safe and legal hemp.”

Galbraith Labs was founded in 1950 as a contract lab in Knoxville serving many industries. With their newly established accreditation, they hope to aid the cannabis industry in Tennessee with hemp testing. Demeter Laboratory is the first medical cannabis lab in Oklahoma. Their goals include “advancing quality controls in medical cannabis, supporting safe consumption of cannabis and ensuring the transparency of the cannabis community.”