Tag Archives: lab

Soapbox

Hemp in the United States: An Opinion

By Dr. Anthony Macherone
No Comments

The Agriculture Improvement Act, also known as the Farm Bill, was signed into law in December 2018. A major provision in the law legalizes hemp as an industrial crop. In August of 2016, USDA, DEA, and FDA published a Statement of Principles in the Federal Register (FR 53365) that defined industrial hemp as any part or derivative (including seeds) of the plant Cannabis sativa L. with a dry weight concentration of tetrahydrocannabinols not greater than 0.3% (wt/wt).

USDA LogoGlobally, the hemp market was estimated at $3.9 billion in 2017 and the hemp seed segment is predicted to grow “at a CAGR of 17.1%” through 2025. Some of the markets affected by hemp production include nutraceuticals, food, textiles, construction materials, and personal care products. It is also anticipated that cannabidiol (a non-psychoactive cannabinoid extracted from hemp) production will grow to support the burgeoning recreational and medicinal cannabis markets in the U.S., Canada and other countries around the world.

In U.S. states and Canada where recreational or medicinal marijuana programs have been legalized, regulations have been defined to assure the safety and quality of the products sold to consumers. These regulations include analytical chemistry and biological assays to identify and quantify pesticides, mycotoxins, heavy metals, residual manufacturing solvents, terpenes, and microbial contaminates. With regards to hemp, the USDA recently released guidelines for testing of hemp. To date, the only required test from the Federal perspective is total ∆9-tetrahydrocannabinol (THC) content < 0.3% by weight. Total THC is essentially the sum of tetrahydrocannabinolic acid (THCA) and THC (Total THC = 0.877(THCA) + THC) but this may be eventually expanded to include all salts and isomers of cannabinols as noted above. Another complication: what constitutes “dry”? The CFR does not answer this.

Agilent Technologies has invested in the development and implementation of the analytical protocol, the services needed to support these assays, the required consumables, reagents, and supplies, and the training of sales and support personnel to comprehensively ensure compliance of hemp with USDA regulations.

Harvest Connect Aims to Advance Georgia Hemp Market

By Aaron G. Biros
No Comments

Georgia doesn’t have a hemp market yet, but that is about to change. In 2019, the Georgia state legislature passed two bills: HB 213, the Georgia Hemp Farming Act and HB 324, the Hope Act, which legalized low-THC oil. While the regulatory framework for the program is still being decided, the market in the state is now beginning to materialize.

Kevin Quirk, CEO of Harvest Connect LLC, wants to be a pioneer for the hemp industry in the Southeast. With a strong focus on local economic growth, Quirk is moving quickly to corner the market and establish a thriving enterprise. His background is in consumer packaged goods (CPG). He’s worked for Anheuser-Busch, Coca Cola and Minute Maid before becoming an entrepreneur in the CPG space. He started White Hat Brands, a children’s health and wellness company, where they worked with the Juvenile Diabetes Research Foundation to co-develop wellness brands for children.

Kevin Quirk, CEO of Harvest Connect LLC

During that time, he saw two major trends unfolding in the CPG arena: organic health and wellness products and hemp-derived CBD products. “Every year we’d see more and more CBD products on the market,” says Quirk. “Almost a year ago, we decided to get into the hemp space coinciding with Georgia’s push around the hemp and medical cannabis market.” That’s when Georgia’s state legislature introduced those two bills.

In October of 2018, Hurricane Michael wiped out an entire season of crops for Georgia farmers, an almost $3 billion hit to the local agricultural economy. Farmers in Georgia were devastated, taking massive losses. “That put momentum behind the hemp program and gave Governor Kemp the impetus to move forward right after the 2018 Farm Bill passed,” says Quirk. With the launch of his newest venture, Harvest Connect LLC, a Georgia-based hemp-derived CBD extraction and retail company, he saw a way to help some farmers get back on their feet.

Quirk says he expects the state will have applications ready for submittal in the next 60-90 days. The state is going to issue permits to processors and farmers. For farmers, the barriers to entry are pretty low- just $50 per acre for a hemp farming permit with a $5 thousand dollar cap. For a processing permit, the barriers are higher and include an application fee, a surety bond and a minimum of at least five Georgia farmers committed to process in a permitted facility. According to Quirk, it is also critical to understand how to manufacture quality products in a highly regulated environment. Quirk has experience in building and running food-grade USDA and FDA manufacturing facilities and already has a number of farmers signed up to process with them once the program gets off the ground. Many of them are tobacco and cotton farmers hit hard in the aftermath of Hurricane Michael.

Harvest Connect, through its subsidiary Graceleaf, is planning to launch a series of retail CBD stores throughout the state. “This will help us  meet the demand in Georgia, which will help patients in Georgia and which will then help farmers in Georgia,” says Quirk. Georgia hasn’t launched a new agricultural product in decades at least, so for Quirk and Harvest Connect, this is about putting Georgia farmers first. “We plan to work very closely with our growers as partners to make sure everyone succeeds,” he added.

Quirk predicts the Southeast will be a leading producer of hemp for years to come. “I think it’s going to be huge,” says Quirk. “With just the pure amount of agricultural land mass that we have, plus the ideal climate, we’ll be able to turn 2-3 crops a year in the southern parts of Georgia. We actually think Georgia could be one of the most significant producers of hemp in the country.”

While the state is working on promulgating the rules, establishing the licensing process and rolling out the hemp program, Quirk is working to iron out the details of his business so they are ready as soon as the time comes. “We expect to be up and running with our processing facility by Q2 of 2020.”

Nevada Lab License Suspended Amid Potency Results Investigation

By Aaron G. Biros
1 Comment

Back in September, Nevada officials announced a state-wide investigation into how products with high levels of yeast and mold were sold in dispensaries and alleged that labs could possibly be manipulating potency numbers on certificates of analysis. Then in late November, regulators suspended the license for Certified Ag Labs, a cannabis testing laboratory based in Sparks, Nevada.

Nevada regulators issued a press release alleging that products tested at Certified Ag Labs “may be labeled incorrectly and could contain a different level of THC than what is listed on product packaging.” Randy Gardner, a managing member at Certified Ag Labs told the Las Vegas Review-Journal that investigators showed up to his lab in October twice to collect samples for follow up tests.

On November 18, a state notice posted on the door of the lab read, “Registration and License Suspended,” according to the Las Vegas Review-Journal.

After that, Gardner fired back. In a statement sent out shortly after, Gardner said they were accused of lying about THC test results to the Department of Taxation (the agency that regulates cannabis in Nevada).

“The state’s decision to suspend and potentially revoke our license came without warning,” says Gardner’s statement. “This accusation is as baseless as it is appalling, as we have been completely transparent with the state at all times. We take this matter very seriously, and based on my over 30 years of laboratory experience we believe these allegations unconscionable at best.”

“The state came in for their audit then came back and suspended our license without us having a chance to further clarify or refute their findings,” the statement reads. “We hope the state appreciates that a business and its employees’ livelihoods and reputations are at stake. We are pursuing our options and all legal and equitable redress will be on the table.”

The Department of Taxation, which isn’t releasing any more information currently, says they found “inaccurate and misleading” potency test results, once they tested the samples collected from Certified Ag Labs.

This isn’t the first time Nevada regulators have suspended lab testing licenses. When Nevada legalized adult use sales and the market became operational back in 2017, the state suspended a lab’s license in September of that year. Then in late 2017, Certified Ag Labs and another lab had their licenses suspended for “not following proper lab procedures and good laboratory practices,” according to Stephanie Klapstein, spokeswoman for the Department of Taxation. Those licenses were reinstated in January of 2018.

Mark Your Calendars: The Cannabis Labs Virtual Conference Returns

By Cannabis Industry Journal Staff
1 Comment

On January 15th, 2020, Cannabis Industry Journal is hosting the 3rd Annual Cannabis Labs Virtual Conference. From 11–4 pm ET, you’ll get access to five veterans of the cannabis industry discussing a wide range of cannabis testing issues. Hear from subject matter experts who will share their perspectives on regulations for cannabis and hemp testing, THC and CBD testing, laboratory management, moisture content and water activity and microbiological testing.

Speakers include:

  • Charles Deibel, President & CEO of Deibel Labs, Inc.
  • Dr. Brady Carter, Sr. Applications Scientist with Neutec
  • Aaron Hilyard, Microbiologist at DigiPath Labs
  • Heather Wade, President of Heather Wade Group, LLC
  • Heather Ebling, Senior Applications & Support Manager at Medicinal Genomics

Attendees will have the opportunity to ask speakers questions during the live Q&A session that follows each presentation. Five experts, five presentations, all on the same day and free to attend. Register now for this complimentary series of webinars. 

Steven Burton

Standardization: A Guide Through the Minefield

By Steven Burton
No Comments
Steven Burton

Now that cannabis edibles have been legalized nationally in Canada, many existing and aspiring license holders have been surprised to discover that they must comply with food safety regulations. This became crystal clear when Health Canada published their Good Production Practices Guide For Cannabis in August 2019.

With this development, it should be obvious to everyone that Good Manufacturing Practices (GMP) certifications are simply not enough.

Hazard Analysis and Critical Control Point (HACCP) based preventative control programs are now the absolute minimum and higher levels of certification (GFSI) should be on everyone’s wish list.

HACCP is a methodology that is all about identifying biological, chemical and physical hazards and determining how they will be controlled to mitigate the risk of injury to humans. Recently, bio-terrorism and food fraud hazards have been added to the list and it is a good idea to address quality hazards as well.

The process of developing a HACCP program involves identifying these hazards with respect to ingredients, materials, packaging, processes and cross-contamination points (explicitly required in Canada only). However, it is a specific ingredient hazard that I’d like to talk about here.

HACCPAs this market has emerged, I’ve met with many cannabis companies as the onerous levels of knowledge and effort required to build and maintain an effective HACCP program manually has dawned upon the industry. Many are looking for technological solutions to quickly solve this problem. During these discussions, a curious fact has emerged that set off the food safety alarm klaxons around here.

Most people alive today are too young to remember this but, with few exceptions, the standardization of ingredients is a relatively modern phenomenon. It used to be that the fat content of your milk varied from season to season and cow to cow. Over time, the food industry standardized so that, amazingly, you can now choose between milks with either 1% or 2% fat, a level of precision that would border on miraculous to someone born in the early 20th century.

The standardization of ingredients is important in terms of both quality and safety. Take alcohol for example. We know that a shot of spirits generally contains 40% alcohol. Different products may vary from this standard but, if I pour a shot of my favourite Bowmore No.1 single malt in Canada or Tasmania, this year or 10 years from now, I can expect a consistent effect from the 40% alcohol content of the quantity I’ve imbibed.

Imagine a world in which this was not the case, where one shot would be 40% but the next might be 80%. Things could get out of control quite easily at the 80% level so, to avoid this, distillers monitor and blend their product to ensure they achieve the 40% target, which is called the “standardization marker”.

With respect to cannabis, the obvious standardization marker is THC. During the manufacturing process, edibles manufacturers do not normally add cannabis flower directly into their products but instead add a THC concentrate produced during previous production steps. However, we’ve found that the wisdom of standardizing these concentrates has not yet dawned upon many in the industry, which is alarming at best and dangerous at worst.

The reason for this is that, since cannabis is inherently a heterogeneous plant, one cannot precisely achieve a particular marker value so the outcome of the concentration process is variable. The food industry long ago overcame this problem by blending or diluting to achieve a consistent marker concentration, but the cannabis industry has not yet adopted this advance.

The cannabis edibles industry is still immature and it will take time to bring all the necessary risk mitigation processes into place but one excellent place to start is to seriously consider standardizing concentrates to a THC marker.Instead, manufacturers simply keep track of the strength of each batch of concentrate and then adjust the quantity added to their recipes to achieve the desired THC content. This seems logical on the surface but presents a serious risk from the HACCP perspective, namely a chemical hazard, “Excessive psychoactive compound concentrations due to human error at levels that may be injurious to human health”.

The reality is that workers make mistakes, which is why it is imperative to mitigate the risk of human error insomuch as possible. One of the best ways to do this is to standardize to avoid the scenario where a worker, faced with a row of identical containers that are differentiated only by a tiny bit of text, accidentally grabs the wrong bottle. The error isn’t caught until the product has been shipped, consumed, and reports of hospital visits start coming in after the authorities trace the problem back to you. You must bear the costs of the recall, your reputation has been decimated and your company is floundering on the financial rocks.

US-based Drip More, LP recently found this out the hard way after consumers complained that their product tasted bad, bitter and/or harsh. An investigation determined that excessive nicotine content was the source of the problem and a voluntary recall was initiated. Affected product that had already been sold in 26 states. The costs of this recall have not been tallied but they will be staggering.

The cannabis edibles industry is still immature and it will take time to bring all the necessary risk mitigation processes into place but one excellent place to start is to seriously consider standardizing concentrates to a THC marker. This strategy is cheap, easy and you’ll never be sorry.

Beyond THC: Encouraging Cannabinoid and Terpene Production with LEDs

By Andrew Myers
No Comments

For years, tetrahydrocannabinol (THC) got all the attention. While THC certainly delivers its own benefits (such as relaxation and pain relief), there’s a whole host of other – and often overlooked – compounds found in cannabis with important benefits as well. THC is truly only the tip of the iceberg when it comes to cannabis’s potential.

As the cannabis industry evolves with changing consumer tastes and developing medical research, growers may employ techniques to boost cannabinoid and terpene profiles in their harvests – beyond merely focusing on THC. Advanced LEDs allow growers to elicit specific biological responses in cannabis crops, including increased concentrations of these naturally occurring chemical compounds.

The Foundation of Cannabis’s Effects
Whether used medicinally or otherwise, cannabis has changed our society and many of our lives – and there’s a collection of naturally occurring chemical compounds, known as cannabinoids and terpenes, to thank.

  • The cannabinoids THC and CBD are the most common and well-researched, however they are accompanied by more than 200 additional compounds, including cannabinol (CBN), cannabigerol (CBG) and tetrahydrocannabivarin (THCV), among others.
  • The cannabis plant also contains terpenes. These structures are responsible for giving flowers (including cannabis), fruits and spices their distinctive flavors and aromas. Common terpenes include limonene, linalool, pinene and myrcene.

Both cannabinoids and terpenes are found in the cannabis plant’s glandular structures known as trichomes. Look closely, and you’ll notice trichomes coating the cannabis flowers and leaves, giving the plant an almost frosty appearance.

macropistil/trichome
A macro view of the trichomes and pistils on the plant

Trichomes – which are found across several plant species – are a key aspect of a cannabis plant’s survival. The specific combination of metabolites produced by trichomes may attract certain pollinators and repel plant-eating animals. Moreover, trichomes (and specifically THC) may act as the plant’s form of sunscreen and shield the plant from harmful ultraviolet rays.

While they play an essential part in the cannabis plant’s lifecycle, trichomes are volatile and easily influenced by a range of environmental factors, including light, heat, physical agitation and time. Therefore, environment is a defining variable in the development of these important structures.

How LEDs Support Cannabinoid and Terpene Development in Crops
Spectrally tunable LEDs give indoor cannabis growers unparalleled control over their crops. As research has expanded about plants’ responses to the light spectrum, growers have discovered they are able to elicit certain physiological responses in the plant. This phenomenon is called photomorphogenesis. At its root, photomorphogenesis is a survival tactic – it’s how the plant responds to miniscule changes in its environment to increase the chances of reaching full maturity and, eventually, reproducing. While cultivated cannabis plants won’t reproduce at an indoor setting, growers can still use the light spectrum to encourage strong root and stem development, hasten the flowering process and the development of bigger, brightly colored flowers.

It makes sense that using the proper light spectrums may also have an impact on the production of specific cannabinoids and terpenes – an important factor when responding to highly specific consumer needs and desires, both within medical and adult-use markets.

Here are a few more reasons why utilizing full-spectrum LEDs can lead to higher quality cannabis:

  • Lower Heat, but the Same Intensity.
    When compared to HPS, fluorescent and other conventional lighting technologies, LEDs have a much lower heat output, but provide the same level of intensity (and often improved uniformity). This represents an enormous advantage for cannabis cultivators, as the lights can be hung much closer to the plant canopy without burning trichomes than they would be able to with other lighting technologies.
  • UV Light. Cannabinoids and terpenes are part of the cannabis plant’s natural defense mechanism, so it makes sense that lightly stressing plants can boost cannabinoid and terpene numbers. Some studies illustrate an increase in UV-B and UV-A light can lead to richer cannabinoid and terpene profiles.1 It’s a fine line to walk, though – too much UV can result in burned plants, which leads to a noticeable drop in cannabinoids.
  • Full-Spectrum Capabilities. The cannabis plant evolved over millions of years under the steady and reliable light of the sun. Full-spectrum is the closest thing to natural sunlight that growers will be able to find for indoor growing – and they’ve been shown to perform better in terms of cannabinoid development. A 2018 study titled “The Effect of Light Spectrum on the Morphology and Cannabinoid Content for Cannabis Sativa L.,” explored how an optimized light spectrum resulted in increased expression of cannabinoids CBG and THCV.2

This is the most important tip for indoor growers: your plants’ environment is everything. It can make or break a successful harvest. That means cultivators are responsible for ensuring the plants are kept in ideal conditions. Lights are certainly important at an indoor facility, but there are several other factors to consider that can affect your lights’ performance and the potency of your final product. This includes your temperature regulation, humidity, the density of plants within the space, CO2 concentration and many other variables. For the best results, your lights should be fully aligned with other environmental controls in your space. Nothing sabotages a once-promising crop like recurrent issues in the indoor environment.

solsticegrowop_feb
Indoor cultivation facilities often use high powered lights that can give off heat

Cannabinoids and terpenes take time to develop – so cultivators will want to avoid harvesting their plants too early. On the other hand, these compounds begin to degrade over time, so growers can’t wait too long either.

Cultivators seeking potent cannabinoid and terpene profiles must find a happy medium for the best results – and the best place to look is where cannabinoids and terpenes develop: the trichomes. With a microscope, cultivators can get up close and personal with these sparkly structures. Younger plants begin with clear trichomes, which eventually become opaque and change to amber. Once your plants show amber-hued trichomes, they’re ready for harvest.

The truth here is that there’s no perfect formula to elicit show-stopping cannabinoids and dizzying terpenes with every harvest. A lot of cannabis cultivation is based around trial-and-error, finding what works for your space, your business and your team. But understanding the basics around indoor environmental controls like lighting and temperature – and how they can affect the development of cannabinoids and terpenes – is an excellent place to start. Using high quality equipment, such as full-spectrum LED lighting can boost both cannabinoid and terpene production, resulting in richer, more potent and higher quality strains.


References:

  1. Lyndon, John, Teramura, Alan H., Coffman, Benjamin C. “UV-B Radiation Effects on Photosynthesis, Growth and Cannabinoid Production of Two Cannabis Sativa Chemotypes.” August 1987. Photochemistry and photobiology. Web. https://onlinelibrary.wiley.com/doi/abs/10.1111/j.1751-1097.1987.tb04757.x?&sid=nlm%3Apubmed
  2. Magagnini G., Grassi G., Kotiranta, S. “The Effect of Light Spectrum on the Morphology and Cannabinoid Content of Cannabis sativa L.” 2018. Medical Cannabis and Cannabinoids. Web: https://www.karger.com/Article/FullText/489030

North Carolina Gets First Accredited Cannabis Lab

By Cannabis Industry Journal Staff
No Comments

In a press release published on Monday, the American Association for Laboratory Accreditation (A2LA), announced the renewal of accreditation for Global Laboratory Services, Inc. for ISO 17025:2017 in cannabis testing. The laboratory, based in Wilson, North Carolina, becomes first cannabis testing laboratory accredited in that state by adding the industrial hemp testing to their chemical scope of accreditation.

According to Kim Hesse, business development manager at Global Laboratory Services, they plan to expand their services in the hemp market with additional types of hemp testing. “At Global Laboratory Services, we always strive to keep pace with industry needs,” says Hesse. “We saw the need for an accredited laboratory in the hemp industry and therefore added CBD and THC testing to our scope. Our next step is to expand our service offerings to include agrochemical analysis of industrial hemp.”

Adam Gouker, general manager at A2LA, says accreditation plays a vital role in the cannabis industry and its regulatory requirements. “We congratulate Global Laboratory Services on becoming the first cannabis testing laboratory accredited in the state of North Carolina, specifically for industrial hemp,” says Gouker. “A2LA realizes the vital role that accreditation plays in the cannabis industry to support compliance with regulatory requirements, and we are thrilled to see that our service has been adopted in a new state. We look forward to our continued relationship with Global Laboratory Services in the provision of their accreditation needs.”

Multi-Element Analysis Using ICP-MS: A Look at Heavy Metals Testing

By Cannabis Industry Journal Staff
No Comments

Across the country and across the world, governments that legalize cannabis implement increasingly rigorous requirements for laboratory testing. Helping to protect patients and consumers from contaminants, these requirements involve a slew of lab tests, including quantifying the levels of microbial contaminants, pathogens, mold and heavy metals.

Cannabis and hemp have a unique ability to accumulate elements found in soil, which is why these plants can be used as effective tools for bioremediation. Because cannabis plants have the ability to absorb potentially toxic and dangerous elements found in the soil they grow in, lab testing regulations often include the requirement for heavy metals testing, such as Cadmium, Lead, Mercury, Arsenic and others.

In addition to legal cannabis markets across the country, the USDA announced the establishment of the U.S. Domestic Hemp Production Program, following the enactment of the 2018 Farm Bill, essentially legalizing hemp. This announcement comes with information for hemp testing labs, including testing and sampling guidelines. While the information available on the USDA’s website only touches on testing for THC, required to be no greater than 0.3% dry weight concentration, more testing guidelines in the future are sure to include a discussion of heavy metals testing.

Table 1. ICP-MS operating conditions (shaded parameters were automatically optimized during start up for the HMI conditions).

In an application note produced by Agilent Technologies, Inc., the Agilent 7800 ICP-MS was used to analyze 25 elements in a variety of cannabis and hemp-derived products. The study was conducted using that Agilent 7800 ICP-MS, which includes Agilent’s proprietary High Matrix Introduction (HMI) system. The analysis was automated  by using the Agilent SPS 4 autosampler.

Instrumentation

The instrument operating conditions can be found in Table 1. In this study, the HMI dilution factor was 4x and the analytes were all acquired in the Helium collision mode. Using this methodology, the Helium collision mode consistently reduces or completely eliminates all common polyatomic interferences using kinetic energy discrimination (KED).

Table 2. Parameters for microwave digestion.

As a comparison, Arsenic and Selenium were also acquired via the MassHunter Software using half-mass correction, which corrects for overlaps due to doubly charged rare earth elements. This software also collects semiquantitative or screening data across the entire mass region, called Quick Scan, showing data for elements that may not be present in the original calibration standards.

SRMs and Samples

Standard reference materials (SRMs) analyzed from the National Institute of Standards and Technology (NIST) were used to verify the sample prep digestion process. Those included NIST 1547 Peach Leaves, NIST 1573a Tomato Leaves and NIST 1575 Pine Needles. NIST 1640a Natural Water was also used to verify the calibration.

Figure 1. Calibration curves for As, Cd, Pb, and Hg.

Samples used in the study include cannabis flower, cannabis tablets, a cannabidiol (CBD) tincture, chewable candies and hemp-derived cream.

Sample Preparation

Calibration standards were prepared using a mix of 1% HNO3 and 0.5% HCl. Sodium, Magnesium, Potassium, Calcium and Iron were calibrated from 0.5 to 10 ppm. Mercury was calibrated from 0.05 to 2 ppb. All the other elements were calibrated from 0.5 to 100 ppb.

Table 3. Calibration summary data acquired in He mode. Data for As and Se in shaded cells was obtained using half mass correction tuning.

After weighing the samples (roughly 0.15 g of cannabis plant and between 0.3 to 0.5 g of cannabis product) into quartz vessels, 4 mL HNO3 and 1 mL HCl were added and the samples were microwave digested using the program found in Table 2.

HCI was included to ensure the stability of Mercury and Silver in solution. They diluted the digested samples in the same acid mix as the standards. SRMs were prepared using the same method to verify sample digestion and to confirm the recovery of analytes.

Four samples were prepared in triplicate and fortified with the Agilent Environmental Mix Spike solution prior to the analysis. All samples, spikes and SRMs were diluted 5x before testing to reduce the acid concentration.

Calibration

Table 4. ICV and CCV recovery tests. Data for As and Se in shaded cells was obtained using half mass correction tuning.

The calibration curves for Arsenic, Cadmium, Lead and Mercury can be found in Figure 1 and a summary of the calibration data is in Table 3. For quality control, the SRM NIST 1645a Natural Water was used for the initial calibration verification standard.  Recoveries found in Table 4 are for all the certified elements present in SRM NIST 1640a. The mean recoveries and concentration range can also be found in Table 4. All the continuing calibration solution recoveries were within 10% of the expected value.

Internal Standard Stability

Figure 2 highlights the ISTD signal stability for the sequence of 58 samples analyzed over roughly four hours. The recoveries for all samples were well within 20 % of the value in the initial calibration standard.

Figure 2. Internal standard signal stability for the sequence of 58 samples analyzed over ~four hours.

Results

In Table 5, you’ll find that three SRMs were tested to verify the digestion process. The mean results for most elements agreed with the certified concentrations, however the results for Arsenic in NIST 1547 and Selenium in both NIST 1547 and 1573a did not show good agreement due to interreferences formed from the presence of doubly-charged ions

Table 5. Mean concentrations (ppm) of three repeat measurements of three SRMs, including certified element concentrations, where appropriate, and % recovery.

Some plant materials can contain high levels of rare earth elements, which have low second ionization potentials, so they tend to form doubly-charged ions. As the quadrupole Mass Spec separates ions based on their mass-to-charge ratio, the doubly-charged ions appear at half of their true mass. Because of that, a handful of those doubly-charged ions caused overlaps leading to bias in the results for Arsenic and Selenium in samples that have high levels of rare earth elements. Using half mass correction, the ICP-MS corrects for these interferences, which can be automatically set up in the MassHunter software. The shaded cells in Table 5 highlight the half mass corrected results for Arsenic and Selenium, demonstrating recoveries in agreement with the certified concentrations.

In Table 6, you’ll find the quantitative results for cannabis tablets and the CBD tincture. Although the concentrations of Arsenic, Cadmium, Lead and Cobalt are well below current regulations’ maximum levels, they do show up relatively high in the cannabis tablets sample. Both Lead and Cadmium also had notably higher levels in the CBD tincture as well.

Table 6. Quantitative data for two cannabis-related products and two cannabis samples plus mean spike recovery results. All units ppb apart from major elements, which are reported as ppm.

A spike recovery test was utilized to check the accuracy of the method for sample analysis. The spike results are in Table 6.

Using the 7800 ICP-MS instrument and the High Matrix Introduction system, labs can routinely analyze samples that contain high and very variable matrix levels. Using the automated HMI system, labs can reduce the need to manually handle samples, which can reduce the potential for contamination during sample prep. The MassHunter Quick Scan function shows a complete analysis of the heavy metals in the sample, including data reported for elements not included in the calibration standards.

The half mass correction for Arsenic and Selenium allows a lab to accurately determine the correct concentrations. The study showed the validity of the microwave sample prep method with good recovery results for the SRMs. Using the Agilent 7800 ICP-MS in a cannabis or hemp testing lab can be an effective and efficient way to test cannabis products for heavy metals. This test can be used in various stages of the supply chain as a tool for quality controls in the cannabis and hemp markets.


Disclaimer: Agilent products and solutions are intended to be used for cannabis quality control and safety testing in laboratories where such use is permitted under state/country law.

USDA Logo

USDA Announces Hemp Regulations

By Aaron G. Biros
3 Comments
USDA Logo

This morning, U.S. Secretary of Agriculture Sonny Perdue announced the establishment of the U.S. Domestic Hemp Production Program. The program, as stipulated by Congress in the 2018 Farm Bill, will establish a regulatory framework for hemp production in the country.

Secretary Perdue made the announcement in a YouTube video titled “USDA’s Hemp Policy.” Later in the week, an interim final rule formalizing the program will be published in the Federal Register, according to the USDA’s website. “The rule includes provisions for the U.S. Department of Agriculture (USDA) to approve hemp production plans developed by states and Indian tribes including: requirements for maintaining information on the land where hemp is produced; testing the levels of delta-9 tetrahydrocannabinol; disposing of plants not meeting necessary requirements; and licensing requirements,” reads the press release. “It also establishes a federal plan for hemp producers in states or territories of Indian tribes that do not have their own approved hemp production plan.” The interim final rule will go into effect as soon as it is published in the Federal Register, which should be by the end of this week.

You can find a preview of the rule here. The agency has also developed guidelines for sampling and testing procedures, which you can find here. Those documents are meant to provide more information for hemp testing laboratories.

You can watch the YouTube video and read the announcement he made below:

Hello everyone, as I travel across this great country of ours, I hear a lot about a strong interest in a new economic opportunity for America’s farmers: the production of hemp. Which is why today I am pleased to announce the USDA has published the rule establishing the US domestic hemp production program. We said we’d get it done in time for producers to make planning decisions for 2020 and we followed through. We have had teams operating with all hands-on-deck to develop a regulatory framework that meets Congressional intent while seeking to provide a fair, consistent and science-based process for states, tribes, and individual producers who want to participate in this program. As mandated by Congress, our program requires all hemp growers to be licensed and includes testing protocols to ensure that hemp grown under this program is hemp and nothing else. The USDA has also worked to provide licensed growers access to loans and risk management products available for other crops. As the interim final rule, the rule becomes effective immediately upon publication in the federal register. But we still want to hear from you. Help us make sure the regulations meet your needs. That’s why the publication of the interim final rule also includes a public comment period continuing a full and transparent rulemaking process that started with a hemp listening session all the way back in March 2019. At USDA, we are always excited when there are new economic opportunities for our farmers and we hope the ability to grow hemp will pave the way for new products and markets. And I encourage all producers to take the time to fully educate themselves on the processes, requirements and risk that come with any market or product before entering this new frontier. The Agricultural Marketing Service will be providing additional information, resources and educational opportunities on the new program. And I encourage you to visit the USDA hemp website for more information. As always, we thank you for your patience and input during this process.

North Coast Analytical & North Coast Testing Accredited to ISO 17025:2017

By Cannabis Industry Journal Staff
No Comments

According to a press release published earlier this month, the American Association for Laboratory Accreditation (A2LA) announced the accreditation of both North Coast Analytical Laboratories and North Coast Testing Laboratories to ISO 17025:2017 for cannabis testing.

Both labs are located in Streetsboro, Ohio, becoming A2LA’s first accredited labs in the state. North Coast Testing does cannabis testing for Ohio’s medical cannabis industry, whereas North Coast Analytical does testing for the hemp industry.

Carolyn Friedrich, Ph.D., scientific director at North Coast Testing, says they are excited to help ensure the safety of patients for Ohio’s medical cannabis program. “We are extremely proud of the work of our entire team in rapidly developing and implementing a comprehensive quality management program that can give all participants in the Ohio Medical Marijuana Control Program confidence in the quality and safety of products tested in our laboratory,” says Friedrich.

Nick Szabo, laboratory director at North Coast Analytical, says A2LA went “above and beyond at every step, we greatly appreciate their efforts. Our accreditation by A2LA is a testament to our ability to meet the most rigorous quality management standards in analytical testing of hemp products, and a vote of confidence in our team’s ability to perform at the highest levels.”