Tag Archives: lighting

March 21, 2023

The Science of Cultivating Cannabis: Tips for a Thriving Grow Operation

By Nathan Johnson, Ph.D.

Creating a healthy cannabis growing environment based on the science behind growing top-notch, medical-grade cannabis is essential for producing consistent results, assuming you start with quality genetics. Before speaking about the environment, it is necessary to highlight that quality and consistency has to first start with quality plant material. In this article, we will explore six key factors that make for a healthy cannabis growing environment and how regular testing allows growers to achieve consistency and quality. Keep in mind, optimizing these factors to the cannabis strains and environment they are grown in is a must.

Lighting

Lighting is the most important factor in creating a good cannabis growing environment. Cannabis plants require specific types, wavelength and exposure times to grow and produce high-quality flower. The two main types of light that are essential for cannabis growth are blue and red spectrum light where blue is primarily dedicated to vegetative growing and red for flowering. The exposure time is necessary for non-autoflower cannabis to maintain a vegetative or a flowering plant.

To ensure that the plants are receiving the right type and amount of light, growers can use specialized grow lights that provide both blue and red spectrum light. They can also monitor the intensity and duration of light using light meters and timers. Regular testing of the light spectrum and intensity can help growers fine-tune their lighting setup for optimal plant growth and flower development.

Temperature

Temperature always needs to be considered when creating a strong, healthy cannabis growing environment. Cannabis plants prefer a warm, humid environment, but temperatures that are too high or too low can negatively affect plant growth and flower development. The ideal temperature range for cannabis growth is between 70-85°F (21-29°C) during the day and between 58-70°F (14-21°C) at night.

To maintain a consistent temperature in the growing environment, growers can use temperature-controlled grow rooms or HVAC systems. They can also monitor the temperature using digital thermometers and adjust the temperature as needed. Regular testing of the temperature can help growers identify and address any temperature fluctuations that may affect plant growth and flower development.

Humidity

Like other factors that require precision, humidity needs to be carefully dialed in when creating an optimal cannabis growing environment. Cannabis plants prefer a humid environment, but too much humidity can promote the growth of mold and mildew. On the other hand, low humidity can cause the plants to dry out and become stressed.

To maintain a consistent humidity level, growers can use humidifiers and dehumidifiers in the growing environment. They can also monitor the humidity level using a hygrometer and adjust the humidity as needed. Regular testing of the humidity level can help growers identify and address any issues that may affect plant growth and flower development.

Airflow and Ventilation

Proper ventilation helps regulate temperature and humidity and prevents the buildup of carbon dioxide, which can be harmful to the plants. It also helps prevent the growth of mold and mildew. To ensure proper airflow and ventilation, growers can use fans and air ducts in the growing environment. They can also use carbon filters to remove odors and other contaminants from the air. Regular testing of the air quality can help growers identify and address any issues that may affect plant growth and flower development.

Nutrients

Nutrients are a non-negotiable for cannabis growth and flower development. Cannabis plants require a balanced supply of macronutrients such as nitrogen, phosphorus and potassium, as well as micronutrients such as calcium, magnesium and iron.

To ensure that the plants receive the right amount of nutrients, growers can use nutrient-rich soils or hydroponic systems. They can also supplement with fertilizers and other nutrients. Regular testing of the nutrient levels in the soil or growing medium can help growers adjust their nutrient regimen for optimal plant growth and flower development.

Pest and Disease Management

Cannabis plants are susceptible to over 90+ pests and diseases, including insects, mold, mildew, viruses and viroids commonly infected through the environment by touch, air, water and nutrients. The most common are spider mites, aphids, powdery mildew, botrytis, fusarium and hop latent viroid. It is estimated by the United Nations that 20% to 40% of total global crop loss is due to improper pest and disease management. The cannabis growing environment is no different.

Damage from whiteflies, thrips and powdery mildew could be prevented with an appropriate IPM

While lighting, humidity, air flow and nutrients are key aspects for a cannabis growth environment, the most common overlooked aspect of growing is proper pest and disease management. Cannabis plants are susceptible to a variety of pests and diseases, which can have a significant impact on plant health and crop yields. To take optimizing a cannabis growing environment one step further, here are five essentials for developing an effective pest and disease management setup.

Prevention

Prevention is the first and most important step in pest and disease management. Growers should always take steps to prevent pests and diseases from entering or infesting the growing environment in the first place. This can be done by quarantining new plants or clones, using clean equipment, sterilizing the growing area, and monitoring plants for signs of pests and diseases through both visual inspection as well as testing.

Some diseases such as those caused by viruses and viroids, require molecular based testing to identify. Growers should quarantine and test any new plants or clones before introducing them to the growing area. This can help prevent the spread of pests and diseases from infected plants to healthy ones. Growers can also use biological controls, such as beneficial insects, to help prevent pests from infesting the plants. These insects can help control pest populations by preying on them or interfering with their reproduction.

Early Detection

Early detection is key to preventing an entire crop from being infected and scrapped. Growers need to regularly inspect their plants for signs of pests and diseases, including yellowing leaves, discoloration, spots and unusual growth patterns. Early detection can help prevent the spread of pests and diseases and limit the damage they cause, not to mention saving a business’s bottom line!

Integrated Pest Management

Integrated Pest Management (IPM) is an approach to pest and disease management that involves a combination of preventative measures, biological controls and chemical treatments. IPM aims to reduce the use of chemical pesticides, which can be harmful to the environment and human health.

IPM involves regular monitoring of plants for signs of pests and diseases, using biological controls to prevent and control infestations, and only using chemical treatments as a last resort. Chemical treatments should be used sparingly and only when necessary, and growers should follow all safety precautions when using them.

Sanitation

Taking the necessary precautions to ensure all equipment used throughout a cultivation is properly sterilized will save growers from countless headaches. Growers should keep the growing area clean and free of debris, which can provide a breeding ground for pests and diseases. They should also regularly sterilize equipment and growing containers to prevent the spread of pathogens.

Record Keeping

Record keeping is essential for effective pest and disease management in the growing environment. Keep detailed records of all pest and disease issues, including the type of pest or disease, the severity of the infestation, and the treatments used. Cultivators, you will thank yourselves later! This will help identify recurring issues and develop effective pest and disease management strategies.

While there are key aspects of creating a healthy cannabis growing environment, the most common overlooked aspect of growing is on proper pest and disease management, which involves prevention, early detection, integrated pest management, sanitation, quarantine, and record keeping. By taking these steps, growers can help ensure the health and vitality of their plants, produce high-quality cannabis that consumers want and preserve their business’s bottom lines.

July 18, 2022

From Factory to Flower – 4 GMP Insights for the Grow House

By Tom Blaine

No Comments

At first glance, the layout of a grow room and a factory production line might seem to have little in common. But whether a facility is producing plants or parts, adopting good manufacturing practices (GMP) can benefit plant quality, harvest consistency and production economics.

What is GMP?

Simply defined, GMP refers to a production system made up of processes, standards and safeguards designed to consistently meet a defined quality standard. In the grow house, establishing, documenting and implementing GMPs can help guard against problems ranging from plant contamination to inconsistent harvests. GMPs can be organized into five key categories, each which contribute to cultivation:

People: The people working in the grow house understand their responsibilities
Processes: Production processes are clearly documented and consistent across harvests
Procedures: Guidelines are documented and communicated to all employees
Premises: Grow rooms and equipment are clean and maintained
Products: Materials used in cultivation (fertilizers, lighting, growing media, etc.) are assessed

Optimizing each of these five P’s in production can help cultivators protect their business and their margins even as flower prices in both legacy and emerging states continue to trend downward. Below, we look at four GMP insights that can help cultivators coordinate the five Ps to achieve quality, consistency and economic objectives harvest after harvest, without massive investments in capital, even during turbulent market conditions.

#1 Know your numbers and their value

Avoid the temptation to lump production costs into very broad categories, i.e., “cost of goods.” Understanding the exact cost of all inputs that go into a grow is a precedent to cost-effective production. The price of the plant material, energy consumed, labor, nutrients, fertigation and other inputs involved in the grow should be calculated to determine the actual cost of a grow room. If rooms are set up consistently, you can multiply to get an aggregate production cost across the facility.

Look beyond the price tag when calculating costs and consider the value each input brings to the grow. Nutrition is a good example. Understanding the concentration of specific nutrients in a product can be a better way of evaluating its value than simply looking at the cost of the goods. And consider whether added nutrients are actually adding value to the product produced. More isn’t always more. In most cases, simple salts will supply the plant with what it needs to grow.

Growing media is another opportunity to evaluate the cost/benefit of cultivation inputs. How much yield can be achieved with a particular medium compared to a different choice? For example, a bag of coco may initially appear to be the low-cost choice for cultivation. Upon a deeper evaluation, though, the cost per plant of coco is generally higher when you factor in the amount of media used for each plant (and that doesn’t even factor in the labor to fill the pots).

# 2 Reduce time waste

Among the various inputs in each growing cycle, labor represents a significant cost. Are labor hours being put to the best use and not wasted? American industrialist and innovator in mass production Henry Ford stated, “Time waste differs from material waste in that there can be no salvage. The easiest of all wastes and the hardest to correct is the waste of time, because wasted time does not litter the floor like wasted material.”

One way to see the cost of wasted labor dollars is to set up a camera and record a day of activity in the grow room during each step of a grow cycle. Or simply observe the responsibilities that are requiring workers’ time on a typical day. Watching employees’ work in the grow room may reveal how a room’s set-up is contributing to or hindering production. Are employees spending their time on tactics that add value or are they being slowed down by manual processes, such as filling containers, watering and relocating plants in the facility? Are there steps and process that could be automated, such as fertigation? Seeing how employees’ time is being used can identify opportunities to direct efforts toward functions that add value or cut costs. What would be the economic benefit of reducing a half-day of set-up time in the grow house or automating some processes?

Beyond better allocation of human capital, understanding how time is used in the growing operation can suggest changes to materials used in the grow. For example, selecting a growing media that comes in plugs and blocks with pre-drilled holes for efficiently dropping in new plants can reduce time spent filling pots or configuring containers. Automating functions like fertigation and watering can not only reduce labor time but increase the precision of delivery when it comes to water and nutrients.

#3 Introduce incremental improvements

Many manufacturers rely on pilot plants to mitigate risk before process scale-up takes place across an enterprise. The same approach can benefit the grow house. Resist the temptation to overhaul the system and instead focus on introducing one change at a time. This disciplined approach will allow you to evaluate if a change is actually delivering value and should be applied more broadly. The wisdom of a cautious approach to improvements is reflected in a quote by innovation magnate Steve Jobs, co-founder of Apple. Observing that not every innovation will be a win, Jobs stated, “Sometimes when you innovate you make mistakes. It is best to admit them quickly and get on with improving your other innovations.”

When introducing a new element into the grow, pilot it in one “sample” area before adding it to the entire operation. Then give the innovation time to be evaluated before deploying it more widely. This measured approach can help reduce the risk that accompanies making a change to processes and will allow you to evaluate the relative benefit of any change or innovation. And as changes are introduced one at a time, it is easier to determine which changes are contributing value.

#4 Satisfy the market, not just the spec

Regulatory bodies set the compliance criteria for purity or quality standards in manufacturing, but the ultimate mark of approval is awarded by customers in the marketplace. A harvest may meet all of the quality specs, but if customers don’t want to buy it, achieving GMP metrics is a moot effort. The marketplace will always have the final say on a product’s commercial viability.

Understand what the market wants and be able to replicate it consistently harvest after harvest. Manufacturing a product that meets the market’s desired performance attributes is essential to sustaining and growing operations. Production quality is only as good as the last harvest and any degradation in product quality will diminish buyers’ trust. History shows that the challenge of achieving consistent production quality and reliability isn’t just a problem for cultivators. Among several factors that doomed the short-lived Edsel sedan introduced in 1957 were problems arising from assembly workers having to use different tools and techniques. A lack of consistency in producing cars or cultivars can turn off customers and profitability.

A tension exists between achieving production consistency and the opportunity to introduce changes that improve the grow. By integrating improvements into the production system one measured change at a time, cultivators can assess which improvements to continue and what needs to be tweaked. But as manufacturing has long demonstrated, continuous improvement is an ongoing journey.

As cultivators consider the 5 Ps of people, processes, procedures, premises and products, applying these four GMP insights can help growers in emerging and legacy markets navigate changing market conditions and drive continuous improvement.

February 22, 2022

Going Vertical: How Vertical Farming Is Revolutionizing the Cannabis Industry

By Jeffrey L Garber

1 Comment

In the cannabis industry, it’s crucial to be able to predict the future, to adapt and survive in a competitive industry that is arguably regulated more closely than any other.

From licensing to buildout, there are a growing number of barriers to entering the cannabis industry as a cultivator. Those who are lucky to successfully establish a grow operation are well aware that one of the crucial hurdles is managing space to maximize facility efficiency and capacity.

To stay profitable, the more plants you can grow and harvest at a time in a continuous cycle, the better. From an economic and environmental perspective, managing cost, space and time comes down to automation and efficiencies. One of the most efficient ways we optimize is through the practice of vertical farming.

Vertical farming maximizes canopy square footage while minimizing Cost of Goods Sold (COGs) to produce high-quality cannabis at scale year-round, and the industry is slowly finding that this method is an incredibly efficient and profitable way to maximize cannabis output.

Yellow Dream Farm is our family-owned cannabis cultivation, manufacturing and distribution company based in San Bernardino County, California, often known as the Silicon Valley of cannabis. Our craft, boutique-style cannabis is grown from floor to ceiling in the 30,000-square-foot facility. We’re using cutting-edge technology that’s only come to market in the last five years and using a variety of sustainable practices. With environmental and feeding efficiencies, we’re able to harvest 300 pounds per week when compared to 150 pounds per week from a facility of the same size.

Vertical Farming for Space Optimization

Like any medical field, cannabis has seen large numbers of outside investments into the space, bringing ideologies and efficiencies from other time-tested industries. One such efficiency is vertical farming – a practice already seen in large-scale agriculture.

The Yellow Dream Farm vertical cultivation facility

We choose vertical farming to maximize our canopy square footage and minimize COGs to produce high-quality cannabis at scale. The barrier to entry into the cannabis industry is expensive, and you must utilize every square inch to stay profitable. We believe vertical farming is the most efficient and most profitable way to maximize output and our numbers can back that up; for example, we can produce double the amount of flower than the average single-tier room with the same square footage, without doubling the cost.

Our rooms contain double stacks to double room capacity by using ceiling heights instead of square footage. Even though vertical farming has larger start-up costs, we can maximize square footage and output, allowing us to get a better and faster ROI. Vertical farming can be done in many different ways but the way we built our facility was always with a sustainable outlook. We also look to improve and remove human error; with full irrigation control and crop steering technologies, we can recalibrate sensors, irrigation media and environmental sensors when needed based on successes, challenges or environmental constraints. Additionally, we have a few other sustainable practices that make a difference.

Water Conservation, Lighting and Automation

Being a California-based grower, water conservation is a key part of our operations. With San Bernardino County being located in the heart of the high desert, conserving water is not only a requirement but a competitive advantage. Our practices provide cost savings which we then pass along to our customers. Each cannabis plant on average requires between a half gallon and one gallon of water per day, which we then recirculate through condensate water from our A/C and dehumidifiers. All runoff nutrient water is re-filtered and reused to get the most out of our nutrients before discarding waste. Our freezer panel walls hold temperatures at consistent rates, and we have a fully automated system to dial in specific needs at any given time.

LED lights above a crop at Yellow Dream Farm

Lighting is another major environmental and capital cost. Our primary lighting system is LED technology, and we use LED spectrums to find which spectrum benefits the plant most. With LEDs, our energy consumption is 30 percent less.

Vertical Farming Is the Future of Cannabis and Agriculture

Vertical farming has been hailed as the future of many agricultural industries and cannabis is no different. We already see large vertical farms in most legal states, but surprisingly it’s still not a common style of growing. As the price per pound steadily declines in California, being able to keep COGs down will allow vertical farmers to sustain and thrive in this volatile industry.

In order to adapt, grow and leave a positive mark on the industry, we must pave the way for new styles of growing and utilizing new technology and science that was not available to growers in the past. We can use these advanced new technologies to make real-time changes to each sector of our facility and optimize both people power, and energy efficiency. And most importantly, we’ll be able to produce top-quality cannabis for adults to enjoy at affordable prices.

For more information, visit Yellow Dream Farm.

February 15, 2022

Cannabis Dispensary Displays: What’s Trending in 2022

By Ray Ko

1 Comment

As additional states around the country legalize cannabis – New Jersey, Arizona, South Dakota and Montana, to name a few– more and more medical and adult use dispensaries are popping up. Business owners are looking for ways to stand out from their competition. Enter dispensary displays, cost-effective hot commodities and a trending topic in 2022. Cannabis displays have become the vehicle to not only house merchandise but can also be a customized branding tool unique to the company’s aesthetic and marketing messaging.

Before we delve into the dispensary display trends disrupting the cannabis industry, let’s start at the very beginning: the basics. The basics include retail space, dispensary layout, cannabis inventory, complementary accessories and of course, budget. Decorating a unique space with a signature aesthetic can be as easy as mixing-and-matching the displays and ideas discussed in this article.

A Well-Lighted, Clean and Simple Space is In

Whether your dispensary is for medical or adult use, a clean design aesthetic is always a good choice. This never-fail approach to decorating conveys a crisp, modern, hygienic feel and a neutral palette like clear, white and black cannabis display cases support this look.

Store lighting plays heavily in dispensary décor, too. According to the lighting experts at Stanpro Lighting Systems, there are three basic types of lighting: ambient, task, and accent and all play a unique role. In short, ambient lighting lights up an entire room or space – outdoor too – to safely facilitate traffic. Task lighting, as the name suggests, is used for a given task such as reading and the like. Directional recessed fixtures, pendant and desk lamps all fall into this category. Light is directed to a focal point and shouldn’t be too bright or harsh. Accent lighting directs attention to a point of interest. Think track lighting, undercabinet or recessed lighting – perfect for dispensaries. When mapping your lighting layout, consider pod holder placement. Place a multi-shelf locking cannabis cabinet under bright lights so customers can see and smell, if appropriate, the merchandise. Alternatively, if lighting is an issue, use a lighted display riser to showcase your pod assortment. A pop of color via custom color pod picks like these from shopPOPdisplays, placed inside a clear cannabis display pod holder on the lighted display riser grabs attention and can be easily switched out depending on the product promotion. It’s versatile, cost-efficient and eye catching.

Make It Marketable

Cannabis displays come in all shapes, sizes, styles and colors. Organize your cannabis, CBD, vape and other merchandise like nitro tins to keep clutter at bay, but make it work for your brand as well. Double-duty dispensary displays like tube holders provide the functionality of neatly presenting products with the bonus of brand recognition through a customization option. If decorating your dispensary business and building your brand on a budget – and who isn’t – customizing key pieces like locking displays and cabinets, may be the solution. Placing products in and on customized cannabis dispensary displays with your logo, brand and/or company color scheme brings instant recognition as well as consumer confidence that your dispensary is not a fly-by-night company. Strategic customization might be the savvy investment option in the long run.

Protecting Your Employees: Health and Otherwise

Security means different things to different people. Physical, financial – you name it – people want to feel safe and protection of others, oneself and properties is at the forefront. Like all business owners, dispensary entrepreneurs invest time, money and sweat equity to get their business up and running. According to cannabis software specialist TRYM, by the year 2025, the cannabis industry is estimated to reach $30 billion dollars. Ensuring the safety and security of staff and inventory investment is a top priority. Cameras, security personnel and alarm systems are all factors, plus practically shatter-resistant plexiglass counters and displays are the new must-have trend. Acrylic sheets don’t end at the counter either. The health of staff members, especially during these times mean plexiglass sheets, clear acrylic barriers and sneezeguards are being implemented in dispensaries across the country. In compact or limited retail space these protective panels ensure social distancing and help ease customer anxiety.

The cost of dispensary inventory is significant, protecting it doesn’t have to be. Many states require cannabis, CBD and vape merchandise be stored in locking display cases and locking cabinets, behind counters, and more depending on the state. Sidestep specific regulations and instead opt for securing all cannabis and high-ticket items in both countertop and locking wall mount displays as well as wall pedestals, lighted pedestals (with acrylic cover or without) with the lock option. These display cases promote waist- and eye-level optimization without taking up valuable retail space.

Color Me Green This Year and Next

As mentioned, in 2022 clean is in, but so is green. In The Psychology of Design: The Color Green, Christi Wharton says, “Green evokes a feeling of abundance and is associated with refreshment and peace, rest and security.” Therefore, it only makes sense to include green when decorating your dispensary. Add planters with greenery to odd corners, break up a white space with a verdant splash of color to bring attention to products. Consider custom green acrylic display risers with company name, brand or logo to literally elevate merchandise or use a LED cannabis display and a showcase is born!

With these current and classic display trends; a well-designed dispensary doesn’t need tricks and a large budget to succeed. Quality merchandise, great customer service as well as classic in-stock and custom dispensary displays never go out of style.

September 21, 2021

Cannabis Manufacturing Considerations: From Raw Materials to Finished Goods

By David Vaillencourt, Kathleen May

2 Comments

Facility layout and design are important components of overall operations, both in terms of maximizing the effectiveness and efficiency of the process(es) executed in a facility, and in meeting the needs of personnel. Prior to the purchase of an existing building or investing in new construction, the activities and processes that will be conducted in a facility must be mapped out and evaluated to determine the appropriate infrastructure and flow of processes and materials. In cannabis markets where vertical integration is the required business model, multiple product and process flows must be incorporated into the design and construction. Materials of construction and critical utilities are essential considerations if there is the desire to meet Good Manufacturing Practice (GMP) compliance or to process in an ISO certified cleanroom. Regardless of what type of facility is needed or desired, applicable local, federal and international regulations and standards must be reviewed to ensure proper design, construction and operation, as well as to guarantee safety of employees.

Materials of Construction

The materials of construction for interior work surfaces, walls, floors and ceilings should be fabricated of non-porous, smooth and corrosive resistant surfaces that are easily cleanable to prevent harboring of microorganisms and damage from chemical residues. Flooring should also provide wear resistance, stain and chemical resistance for high traffic applications. ISO 22196:2011, Measurement Of Antibacterial Activity On Plastics And Other Non-Porous Surfaces²² provides a method for evaluating the antibacterial activity of antibacterial-treated plastics, and other non-porous, surfaces of products (including intermediate products). Interior and exterior (including the roof) materials of construction should meet the requirements of ASTM E108 -11, Standard Test Methods for Fire Tests of Roof Covering⁷, UL 790, Standard for Standard Test Methods for Fire Tests of Roof Coverings ⁸, the International Building Code (IBC) ⁹, the National Fire Protection Association (NFPA) ¹¹, Occupational Safety and Health Administration (OSHA) and other applicable building and safety standards, particularly when the use, storage, filling, and handling of hazardous materials occurs in the facility.

Utilities

Critical and non-critical utilities need to be considered in the initial planning phase of a facility build out. Critical utilities are the utilities that when used have the potential to impact product quality. These utilities include water systems, heating, ventilation and air conditioning (HVAC), compressed air and pure steam. Non-critical utilities may not present a direct risk to product quality, but are necessary to support the successful, compliant and safe operations of a facility. These utilities include electrical infrastructure, lighting, fire detection and suppression systems, gas detection and sewage.

Water

Microbial monitoring methods can include frequent/consistent testing

Water quality, both chemical and microbial, is a fundamental and often overlooked critical parameter in the design phase of cannabis operations. Water is used to irrigate plants, for personnel handwashing, potentially as a component in compounding/formulation of finished goods and for cleaning activities. The United States Pharmacopeia (USP) Chapter 1231, Water for Pharmaceutical Purposes ², provides extensive guidance on the design, operation, and monitoring of water systems. Water quality should be tested and monitored to ensure compliance to microbiological and chemical specifications based on the chosen water type, the intended use of the water, and the environment in which the water is used. Microbial monitoring methods are described in USP Chapter 61, Testing: Microbial Enumeration Tests ³and Chapter 62, Testing: Tests for Specified Microorganisms ⁴, and chemical monitoring methods are described in USP Chapter 643, Total Organic Carbon ⁵, and Chapter 645, Water Conductivity ⁶.Overall water usage must be considered during the facility design phase. In addition to utilizing water for irrigation, cleaning, product processing, and personal hygiene, water is used for heating and cooling of the HVAC system, fogging in pest control procedures and in wastewater treatment procedures A facility’s water system must be capable of managing the amount of water required for the entire operation. Water usage and drainage must meet environmental protection standards. State and local municipalities may have water usage limits, capture and reuse requirements and regulations regarding runoff and erosion control that must also be considered as part of the water system design.

Lighting

Lighting considerations for a cultivation facility are a balance between energy efficiency and what is optimal for plant growth. The preferred lighting choice has typically been High Intensity Discharge (HID) lighting, which includes metal halide (MH) and high-pressure sodium (HPS) bulbs. However, as of late, light-emitting diodes (LED) systems are gaining popularity due to increased energy saving possibilities and innovative technologies. Adequate lighting is critical for ensuring employees can effectively and safely perform their job functions. Many tasks performed on the production floor or in the laboratory require great attention to detail. Therefore, proper lighting is a significant consideration when designing a facility.

HVAC

urban-gro — Proper lighting is a significant consideration when designing a facility.

Environmental factors, such as temperature, relative humidity (RH), airflow and air quality play a significant role in maintaining and controlling cannabis operations. A facility’s HVAC system has a direct impact on cultivation and manufacturing environments, and HVAC performance may make or break the success of an operation. Sensible heat ratios (SHRs) may be impacted by lighting usage and RH levels may be impacted by the water usage/irrigation schedule in a cultivation facility. Dehumidification considerations as described in the National Cannabis Industry Association (NCIA) Committee Blog: An Introduction to HVACD for Indoor Plant Environments – Why We Should Include a “D” for Dehumidification ²⁶ are critical to support plant growth and vitality, minimize microbial proliferation in the work environment and to sustain product shelf-life/stability. All of these factors must be evaluated when commissioning an HVAC system. HVAC systems with monitoring sensors (temperature, RH and pressure) should be considered. Proper placement of sensors allows for real-time monitoring and a proactive approach to addressing excursions that could negatively impact the work environment.

Compressed Air

Compressed air is another, often overlooked, critical component in cannabis operations. Compressed air may be used for a number of applications, including blowing off and drying work surfaces and bottles/containers prior to filling operations, and providing air for pneumatically controlled valves and cylinders. Common contaminants in compressed air are nonviable particles, water, oil, and viable microorganisms. Contaminants should be controlled with the use appropriate in-line filtration. Compressed air application that could impact final product quality and safety requires routine monitoring and testing. ISO 8573:2010, Compressed Air Specifications ²¹, separates air quality levels into classes to help differentiate air requirements based on facility type.

Electrical Infrastructure

Facilities should be designed to meet the electrical demands of equipment operation, lighting, and accurate functionality of HVAC systems. Processes and procedures should be designed according to the requirements outlined in the National Electrical Code (NEC) ¹², Institute of Electrical and Electronics Engineers (IEEE) ¹³, National Electrical Safety Code (NESC) ¹⁴, International Building Code (IBC) ⁹, International Energy Conservation Code (IECC) ¹⁵ and any other relevant standards dictated by the Authority Having Jurisdiction (AHJ).

Fire Detection and Suppression

“Facilities should be designed so that they can be easily expanded or adjusted to meet changing production and market needs.”Proper fire detection and suppression systems should be installed and maintained per the guidelines of the National Fire Protection Association (NFPA) ¹¹, International Building Code (IBC) ⁹, International Fire Code (IFC) ¹⁰, and any other relevant standards dictated by the Authority Having Jurisdiction (AHJ). Facilities should provide standard symbols to communicate fire safety, emergency and associated hazards information as defined in NFPA 170, Standard for Fire Safety and Emergency Symbols ²⁷.

Gas detection

Processes that utilize flammable gasses and solvents should have a continuous gas detection system as required per the IBC, Chapter 39, Section 3905 ⁹. The gas detection should not be greater than 25 percent of the lower explosive limit/lower flammability limit (LEL/LFL) of the materials. Gas detection systems should be listed and labeled in accordance with UL 864, Standard for Control Units and Accessories for Fire Alarm Systems ¹⁶ and/or UL 2017, Standard for General-Purpose Signaling Devices and Systems ¹⁷ and UL 2075, Standard for Gas and Vapor Detectors and Sensors ¹⁸.

Product and Process Flow

Product and process flow considerations include flow of materials as well as personnel. The classic product and process flow of a facility is unidirectional where raw materials enter on one end and finished goods exit at the other. This design minimizes the risk of commingling unapproved and approved raw materials, components and finished goods. Facility space utilization is optimized by providing a more streamlined, efficient and effective process from batch production to final product release with minimal risk of errors. Additionally, efficient flow reduces safety risks to employees and an overall financial risk to the organization as a result of costly injuries. A continuous flow of raw materials and components ensures that supplies are available when needed and they are assessable with no obstructions that could present a potential safety hazard to employees. Proper training and education of personnel on general safety principles, defined work practices, equipment and controls can help reduce workplace accidents involving the moving, handling, and storing of materials.

Facilities Management

Facilities management includes the processes and procedures required for the overall maintenance and security of a cannabis operation. Facilities management considerations during the design phase include pest control, preventative maintenance of critical utilities, and security.

Damage from whiteflies, thrips and powdery mildew could be prevented with an appropriate PCP

A Pest Control Program (PCP) ensures that pest and vermin control is carried out to eliminate health risks from pests and vermin, and to maintain the standards of hygiene necessary for the operation. Shipping and receiving areas are common entryways for pests. The type of dock and dock lever used could be a welcome mat or a blockade for rodents, birds, insects, and other vermin. Standard Operating Procedures (SOPs) should define the procedure and responsibility for PCP planning, implementation and monitoring.

Routine preventative maintenance (PM) on critical utilities should be conducted to maintain optimal performance and prevent microbial and/or particulate ingress into the work environment. Scheduled PMs may include filter replacement, leak and velocity testing, cleaning and sanitization, adjustment of airflow, the inspection of the air intake, fans, bearings and belts and the calibration of monitoring sensors.

In most medical cannabis markets, an established Security Program is a requirement as part of the licensing process. ASTM International standards: D8205 Guide for Video Surveillance System ²³, D8217 Guide for Access Control System[24], and D8218 Guide for Intrusion Detection System (IDS) ²⁵ provide guidance on how to set up a suitable facility security system and program. Facilities should be equipped with security cameras. The number and location of the security cameras should be based on the size, design and layout of the facility. Additional cameras may be required for larger facilities to ensure all “blind spots” are addressed. The facility security system should be monitored by an alarm system with 24/7 tracking. Retention of surveillance data should be defined in an SOP per the AHJ. Motion detectors, if utilized, should be linked to the alarm system, automatic lighting, and automatic notification reporting. The roof area should be monitored by motion sensors to prevent cut-and-drop intrusion. Daily and annual checks should be conducted on the alarm system to ensure proper operation. Physical barriers such as fencing, locked gates, secure doors, window protection, automatic access systems should be used to prevent unauthorized access to the facility. Security barriers must comply with local security, fire safety and zoning regulations. High security locks should be installed on all doors and gates. Facility access should be controlled via Radio Frequency Identification (RFID) access cards, biometric entry systems, keys, locks or codes. All areas where cannabis raw material or cannabis-derived products are processed or stored should be controlled, locked and access restricted to authorized personnel. These areas should be properly designated “Restricted Area – Authorized Personnel Only”.

Future Expansion

The thought of expansion in the beginning stages of facility design is probably the last thing on the mind of the business owner(s) as they are trying to get the operation up and running, but it is likely the first thing on the mind of investors, if they happen to be involved in the business venture. Facilities should be designed so that they can be easily expanded or adjusted to meet changing production and market needs. Thought must be given to how critical systems and product and process flows may be impacted if future expansion is anticipated. The goal should be to minimize down time while maximizing space and production output. Therefore, proper up-front planning regarding future growth is imperative for the operation to be successful and maintain productivity while navigating through those changes.

References:

United States Environmental Protection Agency (EPA) Safe Drinking Water Act (SDWA).
United States Pharmacopeia (USP) Chapter <1231>, Water for Pharmaceutical Purposes.
United States Pharmacopeia (USP) Chapter <61>, Testing: Microbial Enumeration Tests.
United States Pharmacopeia (USP) Chapter <62>, Testing: Tests for Specified Microorganisms.
United States Pharmacopeia (USP) Chapter <643>, Total Organic Carbon.
United States Pharmacopeia (USP) Chapter <645>, Water Conductivity.
ASTM E108 -11, Standard Test Methods for Fire Tests of Roof Coverings.
UL 790, Standard for Standard Test Methods for Fire Tests of Roof Coverings.
International Building Code (IBC).
International Fire Code (IFC).
National Fire Protection Association (NFPA).
National Electrical Code (NEC).
Institute of Electrical and Electronics Engineers (IEEE).
National Electrical Safety Code (NESC).
International Energy Conservation Code (IECC).
UL 864, Standard for Control Units and Accessories for Fire Alarm Systems.
UL 2017, Standard for General-Purpose Signaling Devices and Systems.
UL 2075, Standard for Gas and Vapor Detectors and Sensors.
International Society for Pharmaceutical Engineers (ISPE) Good Practice Guide.
International Society for Pharmaceutical Engineers (ISPE) Guide Water and Steam Systems.
ISO 8573:2010, Compressed Air Specifications.
ISO 22196:2011, Measurement Of Antibacterial Activity On Plastics And Other Non-Porous Surfaces.
D8205 Guide for Video Surveillance System.
D8217 Guide for Access Control Syst
D8218 Guide for Intrusion Detection System (IDS).
National Cannabis Industry Association (NCIA): Committee Blog: An Introduction to HVACD for Indoor Plant Environments – Why We Should Include a “D” for Dehumidification.
NFPA 170, Standard for Fire Safety and Emergency Symbols.

June 23, 2021

Essential Elements to Set Up a Green, Zero-Waste Grow Facility

By Anthony Franciosi

1 Comment

Clean, ecologically sound production methods are the ideal for any cultivation or farming activity. Taking from the earth only what is needed to grow the crop and leaving behind little in the way of chemicals and land/water loss is the goal; with cannabis grow facilities, it can also be a reality.

This type of production does require some capital investment into state-of-the-art equipment and facilities, with standards that are equal to or even surpass current EPA and USDA regulations. While cannabis growing does not yet have access to the organic certification, that doesn’t mean growers can’t abide by and even go beyond the rules, to grow clean, healthy and environmentally sound cannabis.

There are a few essential elements required to make this kind of operation a reality.

Ecologically advanced use of power

For any indoor facility, one of the key elements is lighting. Using as energy efficient a system as possible is key. The best option at the moment is LEC lighting, which provides a spectrum of light that is very close to natural. This makes checking on plant progress more realistic and, with the inclusion of UV-B in the spectrum, can improve yields as well. In addition, the LEC bulbs have a long life—up to 2 years—which means lower maintenance costs as well.
The demand for high-quality, organically grown cannabis continues to increase

Another aspect of growing that tends to use a lot of power is the cooling system. A standard HVAC system will be power intensive, so alternative ones like water chilled climate control systems are just as effective and 30% more power efficient. These systems are also able to reuse wasted power by feeding it back into the system, creating an additional 10% energy reduction. In addition, when the outdoor air temperature dips below 45 degrees, a water chilled system can switch to using the outside air, creating 60—70% in energy savings.

Efficient management of water resources

Cultivators depend heavily on water to ensure that the plants are hydrated and able to absorb the nutrients they need to grow and thrive. The result for many however is an excessive waste of water. This is a problem when a grow facility is leveraging municipal water resources. A water meter helps to manage and track usage but to ensure that it is used as efficiently as possible, a “top feeding” method of usage ensures minimal water waste (5% or less).

Effective waste management

Wastewater is a byproduct of any water intensive cultivation method but there again, managing the systems to ensure that what water isn’t reused and becomes “gray water” is still as clean as possible is the ideal. A high-quality filtration system keeps sediment, chlorine and other harmful elements out of the water supply — and out of the municipal sewage system. Further, by using organic matter throughout the growing process, the wastewater that is produced will meet every federal standard for organic food production.
All plant waste in a grow facility—for example: stems and fan leaves—is disposed of according to state and local laws. With cannabis plants, that requires a certain level of security, including locked dumpsters that are only unlocked and placed outside when the removal trucks arrive on site.

Organic farming practices

Using OMRI (Organic Materials Review Institute) listed soil is an essential part of clean, environmentally friendly growing. To ensure the proper nutrients are available for each harvest, once a crop is gathered, the soil is transferred to a local landscape company to compost and reuse.
Pesticides need to obviously be avoided and all fertilizers need to be USDA approved as organic and all nutrients need to be certified by OMRI to ensure they don’t contain any synthetic materials.

Considering all of these aspects is essential to creating an ecologically friendly grow facility with tremendous yields that are clean and safe for the end consumer, as well as minimizing the impact to the earth.

October 13, 2020

UT-Arlington and UT-El Paso to Evaluate Phytochrome Manipulation in Hemp

By Cannabis Industry Journal Staff

No Comments

The Collaborative Laboratories for Environmental Analysis and Remediation (CLEAR) at the University of Texas at Arlington (UT-Arlington) and the University of Texas at El Paso (UT-El Paso) has begun collaborating with Curtis Mathes Grow Lights (CMGL), a subsidiary of the Curtis Mathes Corporation, and the hemp genetics company ZED Therapeutics. The research will involve characterizing the phytochemical effects of phytochrome manipulation using various LED horticultural lights of differing light spectrum, and novel high-yielding varietals of hemp. All of the hemp plants will be grown by renowned geneticists Adam Jacques, Christian West, and Oriah Love of ZED Therapeutics under the CMGL Harvester LED lights at their Oregon facility. Drs. Kevin Schug and Zacariah Hildenbrand will oversee the analysis of the corresponding samples for the expression of terpenes, flavonoids, and other classes of therapeutic compounds. The expression of 15 primary cannabinoid species will be performed concurrently by Matthew Spurlock of ZED Therapeutics.

“Since its inception, CLEAR has focused almost exclusively on improving environmental stewardship in the energy sector. It is nice to now diversify into the horticultural industry to better understand how chemically-diverse plants like hemp respond to different environmental-friendly LED lights,” says Professor Kevin Schug, Shimadzu Distinguished Professor of Analytical Chemistry and co-founder and the Director of CLEAR.

Hemp has recently garnered significant attention in the mainstream media as a result of the medicinal benefits of its primary natural constituent, CBD. The collaboration amongst UT-Arlington, UT-El Paso, CMGL and ZED Therapeutics is designed to better understand how the variable of light can influence the expression of other medicinal elements.

“We are incredibly excited about our growing collaborations with UT-Arlington, UT-El Paso, and ZED Therapeutics,” says CMGL’s COO, Robert Manes, “This particular research exploring phytochrome manipulation in hemp may unlock new lighting protocols whereby the modulation of different wavelengths is associated with the expression of different phytochemical profiles.”

This research also has the potential to discover novel molecules that may be present in the ZED Therapeutic hemp varietals using high-resolution exploratory instruments that are unique to the laboratories of CLEAR, such as Liquid Chromatography Quadrupole Time-of-Flight Mass Spectrometry (LC-QTOF-MS).

“We are always searching for new ways to expand our genetic catalogue and it will be interesting to see what sort of effects light modulation have on cannabinoid, terpene, and flavonoid expression,” says Adam Jacques of ZED Therapeutics, “Phytochrome manipulation, and any resulting epigenetic effects, is a poorly understood principle of horticulture and we see a significant opportunity with this research to unearth new knowledge.”

“Hemp is a unique plant both in its light spectrum adaptation and the wide range of phytochemicals it can potentially produce,” says Christian West of ZED Therapeutics, “I’ve been waiting my whole career to be a part of this research and having the lighting knowledge of CMGL combined with the analytical power of UT-Arlington and UT-El Paso is priceless in expanding our understanding of the plant.”

February 19, 2020

Top 3 Ways Cultivation Methods Must Change with Regulations

By David Perkins

No Comments

There are obvious upsides and downsides to cannabis regulation. Gone are the days when it was a free for all, for outlaws growing in California’s hills, under the limited protections California’s medical cannabis laws provided. While there is no longer the threat of arrest and incarceration, for the most part, there are also a lot of hoops to jump through, and new rules and standards to contend with. This article highlights three areas in which your cultivation plan must necessarily change due to the new regulations.

1. Integrated Pest Management (IPM) is limited

In the new regulated market, products that were once widely used are now no longer allowed. Prior to regulation, in the days of Prop 215, you could spray your plants with just about anything, since there was no testing mandated for the products that were being sold. However, people unfortunately got sick and experienced negative reactions, with products like Eagle 20, which contains mycobutinol, and Avid, which contains bifenthrin. Accordingly, under new regulations there are thankfully much more stringent standards dictating what pesticides can be used. It’s ironic that for most of the “medical marijuana” era in California there were no mandatory testing requirements for the THC content of your cannabis, let alone testing for toxins, including pesticides, molds or heavy metals.

You need to have a very thorough pest management plan to make sure your bug populations are always in check. Given that there are a small number of allowable products for pest control in the regulated market, this can be tricky. You need to be extremely familiar with what is and isn’t allowed in today’s regulations. You must also make sure that someone who is certified to apply pesticides is applying them.

As a word of caution, there have been instances where approved pesticides were found to have old unused chemicals (that are not approved for use) from the manufacturing process in them. They may have only occurred in very small amounts, but they are harmful to humans and there is no lawful way to dispose of them.

Further, the presence of these harmful chemicals can cause your finished product to fail when undergoing mandated testing.

Rather than using risky chemicals, the best solution for (early detected) control of pests is the use of beneficial insects. Although they may not be the best solution for an infestation, predator bugs like Neoseiulus Californicus can efficiently control small populations of spider mites while ladybugs are good to limit aphids. Strategic planning of your IPM is one of the best ways to keep pest levels in check.

2. Plant size and plant count matter more than ever

Despite widespread legalization in the past few years for both the medical and recreational markets in the United States, the black market is still rampant and most cannabis is still being produced illegally in the US and internationally.

Generally speaking, in the black market, the less plants you have the better, as high plant counts lead to longer sentences of incarceration. With the passage of prop 215 in 1996, many growers, especially outdoor, started growing their plants as big as they possibly could because most limitations were based on plant counts. Some outdoor growers were able to cultivate plants that yielded over 10 pounds per plant. These days regulations are based on canopy measurements, meaning you can grow as many plants as you want within a defined, limited square footage area. This is where “light deprivation,” a method used to force plants into flowering, becomes favorable as it allows 2-4 harvests per year instead of just one. It is a much more intensive way of growing when you have tens of thousands of plants. While it is easier to plant, cultivate and harvest a larger number of smaller plants, it also requires a much more detailed level of planning and organization.

In order to achieve 4 harvests per year, you must have a well thought out cultivation plan and an all-star staff, but if you are able to accomplish this, you can increase your revenue significantly. Maximizing plant canopy space is essential to a profitable business in today’s market, and to do that will require more detailed planning, better organization and proper crop management.

3. How you grow and what equipment you use

With regulation comes liability for defects or injury. It is essential that all equipment used is approved for its intended use. Traditionally, cannabis was cultivated in secrecy in the black market. This led to many unsafe grow rooms being built by people who did not have the proper skills to be undertaking projects such as converting a garage into a grow room or handling the electrical and plumbing running into them. Accordingly, there were many instances of damages to property or injuries to people because of this. Now that counties and states permit cannabis cultivation facilities, the infrastructure and labor that is done must meet regulated building codes and general safety requirements. It is therefore imperative to know the codes and regulations and hire a professional that does, to ensure you meet the standards in order to avoid potential liability.

Larger scale cultivation requires bigger and more expensive equipment. Cultivation facilities are more likely to have sophisticated equipment, such as chiller systems, that are designed to control the grow room environment. While very efficient, some are not intended to be used specifically for cannabis cultivation, and can therefore be difficult to control and maintain. They perform very specific functions, and when not properly tuned to your conditions, can malfunction by prioritizing dehumidification over cooling. This can be a real challenge in warmer climates when temperatures rise, requiring cooling, but also necessitate removal of moisture from the cultivation space.

On the other hand, there is new technology that can make a huge difference in the success of your cultivation. I recently worked with two different companies that specialize in root zone heating systems. One manufactured equipment for root zone heating and cooling of 10k sq ft raised beds that had never been used in California previously. The other company specialized in root zone heating using radiant floor heat. They both worked as intended to maintain a constant root zone temperature, which increased plant health, and ultimately increased yield.

Many counties require data collection from your cultivation, requiring you to track the amount of water and nutrients used. Therefore, another useful tool you can use to increase efficiency, is data collection software that will allow you to collect different information about the amount of water and nutrients used, as well as specific information about the conditions in your grow medium. You can also record and display temperature and humidity readings in your grow room, in real time remotely through Wi-Fi, that you can then access from your phone or computer from anywhere in the world. This can be a useful tool when documenting information that your county, state or investors may require from you. Further, the ability to collect and analyze data will allow you to identify areas of inefficiency in order to correct and optimize your grow room’s potential. While you can achieve these same goals with simple in-line water meters, keeping track of nutrients and pesticides is not as easy. Data collection in the most basic form, using a pen and paper, can be an inaccurate and an inefficient use of time, and can easily be misplaced or ruined. Therefore, simple data software collection programs are the best solution to make the process simple and hassle free.

While it is nice to have state of the art equipment, if it does not work properly, or cannot be easily maintained, it will not be worth it in the long run and you will never see a return on your investment. Innovation comes with a price; using equipment that is cutting edge can be risky, but on the flip side, when done properly it can give you a big advantage over your competitors.

In switching from the black market to the regulated market, these three areas have proven to be the biggest areas of change and have presented the biggest challenges. It is important you consider these necessary changes, and make a solid plan before you begin your cultivation. This is where a cultivation consultant can help.

January 9, 2020

The Power of Prevention: Pathogen Monitoring in Cannabis Cultivation and Processing Facilities

By Nathan Libbey

2 Comments

As the cannabis market matures and the value chain becomes modernized, it’s important to address product safety in a comprehensive way. In other areas of manufacturing, Hazard Analysis & Critical Control Points (HACCP) has been the standard for reducing hazards both for employees and for the products themselves. A Critical Control Point (CCP) is any spot from conception to consumption where a loss of control can potentially result in risk (Unnevehr, 1996). In the food realm, HACCP has been used to drive quality enhancements since the 1980s (Cichy, 1982).

In a nutshell, HACCP seeks to help identify where a problem may enter a product or environment and how that problem may be addressed before it escalates. In cannabis, these hazards include many of the same problems that food products have: specifically molds, yeasts, and pathogenic bacteria (Listeria, E. coli, etc.). While the current industry standard is to test products at the end stage for these contaminants, this late-stage pass/fail regimen leads to huge lots of destroyed product and a risk for consumer distrust (Yamashiro, 2019). HACCP, therefore, should be applied at every stage of the production process.

Pathogen Environmental Monitoring (PEM) is a tool that can be used to identify CCPs in a cannabis cultivation or processing facility. The main goal of a PEM program is to find a contaminant before it reaches a surface that touches the product or the product itself. PEM is conducted using a pre-moistened swab or a sponge to collect a sample from the cannabis environment. The swab can then be sent to a lab for microbial testing. Keys to an effective PEM are:

1. Start with a broad stroke – When the FDA comes to a facility suspected of producing pathogen-laced food products, they conduct what is known as a Swab-a-thon. A Swab-a-thon is a top to bottom collection of samples, usually totaling 100 or more. Similarly, preemptively swabbing should be the first step in any PEM—swab everything to see what exists as a baseline.

2. Map your scene – identify on a map of your facility the following:

Cannabis contact surfaces (CCS) (belts, clippers, tables, etc)
Non-cannabis contact surfaces (Non-CCS) (floors, lighting, drains, etc)
Flow of air and people (where do air and people enter and where do they go?

Identifying the above zones will help deepen your understanding of where contaminants may come into contact with cannabis and how they may migrate from a Non-CCS to a CCS.

3. Plan and execute:

Based on the results of mapping, and Swab-a-thon, identify where and when you will be collecting samples on a consistent and repeatable basis. Emphasis should be placed on areas that are deemed a risk based on 1) and 2). Samples should be collected at random in all zones to ensure comprehensive screening.

4. Remediate and modify:

If you get a positive result during PEM, don’t panic—pathogens are ubiquitous.
Remediate any trouble spots with deep cleaning, remediation devices or other protocols.
Re-test areas that were positive for pathogens to ensure remediation is successful.
Revisit and modify the plan at least once a year and each time a new piece of equipment is added or production flow is otherwise changed.

The steps above are a good starting point for a grower or processor to begin a PEM. Remember that this is not a one-size-fits-all approach to safety; each facility has its own unique set of hazards and control points.

Comprehensive guides for PEM can be found at the links below, many of the concepts can be applied to cannabis production.

https://affifoodsafety.org/lcp/advanced-search/

http://www.centerforproducesafety.org/amass/documents/document/263/Listeria%20Guidance%20UFPA%202013.pdf

Cichy, R. (1982). HACCP as a quality assurance tool in a commissary food-service system. International Journal of Hospitality Management, 1(2), 103-106.

Unnevehr, L., & Jensen, H. (1996). HACCP as a Regulatory Innovation to Improve Food Safety in the Meat Industry. American Journal of Agricultural Economics, 78(3), 764-769.

Yamashiro, C, & Baca, Y. (2019). Prevent high-value cannabis crop loss with innovative environmental monitoring tool.

December 2, 2019

Soapbox

Taking the Guesswork out of Horticultural Lighting

By Leora Radetsky

1 Comment

With 33 states and the District of Columbia having passed laws legalizing marijuana in some form, cannabis cultivation is quickly becoming a booming new business across much of the US. From an energy standpoint, unfortunately, it’s not easy being “green”.

New Frontier Data’s 2018 Cannabis Energy Report found that legal cannabis cultivation in the US consumes approximately 1.1 million megawatt hours of electricity annually – enough to power 92,500 homes or a community the size of Newark, NJ, and accounts for carbon emissions equivalent to that of 92,600 cars. And that consumption is forecasted to increase 162 percent from 2017 to 2022. The report recommended that the industry “evaluate energy-efficient and renewable energy technologies” to nip this challenge in the bud.

Growers seeking to reduce their electricity usage through more efficient lighting face a confusing landscape of options, however. It can be difficult to know what will save electricity and work well for their operations. Technology is advancing quickly and questions abound, from how long a fixture will last and whether a manufacturer’s claims about efficacy are accurate to the effectiveness of various wavelengths for growing a particular plant.

Here’s the good news: there are reliable, third-party lighting and safety standards to help indoor growers make the leap from old-school lighting to state-of-the-art light-emitting diodes (LEDs) that use a fraction of the electricity and are increasingly effective for growing crops from cannabis to tomatoes. Here’s a closer look:

Most lighting fixtures in the North American market go through rigorous inspection by certified third-party testing labs. The first part of the check is for safety – an official UL safety standard tailored for the unique challenges of the greenhouse environment was recently released (UL 8800, the Standard for Horticultural Lighting Equipment and Systems). This standard and similar safety certifications at other major labs address wiring, environmental conditions, ingress protection and worker safety related to prolonged photobiological exposure to the eyes and skin. Growers should always ask a fixture manufacturer about safety certification specifically targeted for horticultural environments.

Next on the standards checklist for horticultural fixtures is performance testing. This often happens at the same labs that do safety testing, but is designed to verify efficacy, output, spectrum and other important performance variables. Commercial labs are certified for specific standards, so that a test on a fixture is repeatable at any other lab certified to the same standard. This performance testing results in a report summarizing items like photosynthetic photon flux (PPF), input power (watts), photosynthetic flux efficacy (PPE, measured in μmol/J or micromoles of photosynthetic photons per joule of electrical input power), and spectral content (flux per nanometer (nm) between 400 and 700 nm).

Then, there are flux maintenance standards (such as IES LM-80 and IES TM-21) that help make sure the photosynthetic light output of LED products degrades at an acceptable rate to make a grower’s investment worthwhile. The testing and calculation methods that go into these standards were painstakingly developed through a consensus of knowledgeable lighting stakeholders. A key difference between general lighting and plant lighting, however, is how flux maintenance is measured and benchmarked – the bar is significantly higher for plants compared to people since their metabolism and growth are dependent on the light spectrum and amount.

A plant in flowering under an LED fixture

What’s described above just scratches the surface of the detailed testing used to determine and communicate performance features for commercial horticultural lighting fixtures. There’s a lot of important information to know, but it takes an informed reader to analyze this information and use it to select appropriate horticultural lighting. Our organization, the DesignLights Consortium (DLC), strives to make the vetting process easier for everyone, freeing up growers to focus on their core business.

In the early days of LED lighting, electric utilities had to compare these different lighting factors and reports to inform their energy efficiency rebate/incentive programs. The DLC was founded to fill this need, serving as a central clearinghouse for setting energy efficiency and other product performance minimum standards, and to evaluate products against those standards. Then and now, lighting products that pass review qualify for an online qualified products list (QPL) that utilities use to quickly and accurately incentivize high-performing products.

With its new minimum performance standards for horticultural light fixtures, the DLC seeks to accelerate the adoption of new energy-saving LED fixtures in controlled agriculture environments. To be on the new DLC Horticultural QPL, an LED fixture must be at least 10 percent more efficacious than the best non-LED alternative – a 1,000-watt double-ended high-pressure sodium (HPS) fixture. It also must have a Q90 of 36,000 hours (the number of hours before the photon flux output depreciates to 90 percent), and its driver and fan (if included) must have a rated life of at least 50,000 hours.

Most importantly, every product is listed online in a searchable, filterable database to help growers and facility designers quickly narrow their options. For example, in a retrofit, a grower might know what PPF is needed from each fixture but might also need to stay within a power budget to avoid rewiring circuits. The DLC’s Horticultural QPL can be filtered to quickly find and compare conforming products.

When a new technology is introduced, there is always uncertainty about how to optimally apply it. The horticultural world is no different. We look forward to research supporting additional predictive metrics that allow us to take advantage of the full benefits of high-performance LED and controls technologies. In the meantime, the established standards described here allow for energy efficient and safe cultivation facilities where growers can confidently produce more with less.