Tag Archives: marijuana

March 15, 2022

2022 Cannabis Cultivation Virtual Conference

By Cannabis Industry Journal Staff

1 Comment

2022 Cannabis Cultivation Virtual Conference

Sponsored by Hardy Diagnostics

View On-Demand Now

Click here to see all available CIJ events and webinars

Agenda

Moving Forward in Craft Cannabis

Ted Harris, Founder & Executive Managing Director, Sweet Leaf Capital

This presentation delves into the craft cannabis market, genetics, going beyond potency, looking into cannabinoids and terpenes, quality vs. yield and much more.

Beyond Terpenes: What Else Is There and Why Should You Care?

Dr. Aldwin Anterola, Chief Science Officer, Veda Scientific
Leo Welder, CEO of Veda Scientific

Using GCxGC MS technology, we found that on average 40% of terpene content was not accounted for by the 40 standard terpenes used in cannabis testing labs. We have also detected other volatile compounds including alcohols, aldehydes, alkanes, aromatic and other hydrocarbons, esters, fatty acids, ketones and thiols. We will discuss the implications of this more comprehensive “volatilome” data including its significance in characterizing cannabis, distinguishing strains from each other, breeding for desired traits, improving quality and consistency of cannabis products, and even selecting better and safer processes and packaging

Hardy Diagnostics Sponsored TechTalk

Jessa Youngblood, Food and Beverage Market Coordinator, Hardy Diagnostics

Applying Integrated Pest Management to Cannabis Cultivation

Dan Banks, CCA, Co-Founder, Precision Crop Consulting, LLC

Attendees can expect to learn about: an introduction to IPM and how this approach to pest management applies to cannabis production, the components of an effective IPM program (Pest monitoring and identification, Structural & Environmental controls, Cultural practices, Resistant varieties, Biological controls, Compliant pesticide use) and actionable tips and suggestions relating to each component of a Cannabis IPM program.

Characterizing Nuisance Biofilms with NGS to Adopt Better Water Treatment Program

Taylor Robinson, Director of Analytical Services/R&D, Silver Bullet Corp.

Attendees can expect to learn about what biofilms are, how and why do they form, what is NGS and how can it be used in the context of biofilm analysis, and how can we use modern analytical techniques to implement more efficient treatment strategies.

View On-Demand Now

March 10, 2022

Meet Looming Federal Cannabis Regulatory Compliance Management with Automation & Confidence

By Steven Burton

1 Comment

Federal regulation of the cannabis and hemp sectors is coming sooner rather than later — and this is mostly good news for cannabis businesses and consumers. But cannabis producers already struggling to meet complex and ever-changing local regulations (where they exist) will be facing a new set of challenges with another level of regulatory oversight and compliance.

Navigating multi-jurisdictional regulatory compliance management requirements is near-impossible with legacy manual systems. That’s why it’s time to leverage the right enterprise resource planning (ERP) system, so that you and your team can meet these compliance management complexities with confidence and ease. Whether you manufacture flower, edibles, beverages, supplements or other dispensary products, here’s what you need to know to stay agile and profitable as more changes loom.

Federal Legalization is Coming

To date, there are 18 states with adult use cannabis markets, 37 with medical cannabis programs, and an additional 13 that have some level of decriminalization. At the federal level, there have already been several attempts at cannabis law reform, with even more on the table in the coming year.

One of the most promising is the Republican-led States Reform Act, filed in November 2021. The central tenant of this proposed legislation is to remove cannabis and cannabinoids from listing as a Schedule 1 Drug under the Controlled Substances Act.

Importantly, if this law passes, it would allow individual states to pursue their own cannabis policies and remove the current risks companies face when going against current federal anti-cannabis scheduling.

The States Reform Act also proposes a three percent federal tax on all cannabis sales and that all cannabis sales fall under the Alcohol and Tobacco Tax and Trade Bureau’s (TTB’s) control. The States Reform Act would — finally — guide the regulation of hemp-derived products through the Food and Drug Administration (FDA).

US Senate Majority Leader Chuck Schumer has also been working on another reform bill, specifically the Cannabis Administration and Opportunity Act (CAOA), which he plans to introduce in April 2022 to further emphasize the criminal justice aspects of legal reform in the context of the War on Drugs.

While the government’s track record on cannabis regulatory reform hasn’t been as progressive as many would like, at this point there is widespread public support and proposed bills from both sides of the aisle. As a result, the US may finally see some movement on cannabis law reform in the very near future.

How to Prepare for Federal Regulatory Compliance Management

With federal regulation looming, it’s time for licensed producers to elevate their internal systems. Whether you work with tetrahydrocannabinol (THC) or cannabidiol (CBD), the regulatory protocols in an already complex marketplace are going to change.

This is especially paramount for those producing cannabis or hemp beverages, edibles and supplements. You will need comprehensive and efficient systems to facilitate this transition. An ERP should reduce compliance headaches and ensure your business is ready to scale when a national marketplace launches.

Automate Data Gathering

It is no longer cost effective to manage seed-to-sale traceability with manual data capture. With the thousands, if not tens of thousands, of data points required at most commercial facilities on a routine basis, data logging is by far the best way to start compliance automation.

Automated ERP systems, which capture essential information across your entire operation, ensure access to real-time data for forecasting, accounting, regulatory compliance reporting and traceability. That means using software that captures and logs intel from across your organization about quality control, inventory and traceability, all without arduous manual input.

The best and most successful ERP systems should be used by all employees to collect data, from sorters/pickers to fork lift drivers to supervisors to senior management. For this to happen easily, the solution must be accessible and user friendly for all employees. ERP systems that can be easily integrated with tablets and smartphones (as well as IoT devices) reduce the need for expensive terminals on the production floor and make data collection a straightforward part of daily operations.

Build Systems to Facilitate Growth from the Start

A rigid ERP system that can’t grow with you is not a smart long-term investment. An adaptable multi-platform system evolves with your company and constantly changing regulatory compliance requirements. A solution that provides access to the entire facility, instead of being limited to individual users, ensures that growing teams can easily contribute to data quality from the plant floor all the way up to the executive office for actionable insights.

Markets are opening up across the country and quite soon, many companies will be looking to expand their operations nationally. As a result, you’ll need systems that can scale, cover additional facilities, keep up with increased production, and even work across different jurisdictions.

Having instant access to detailed operational information delivers greater business oversight at the micro and macro levels – insight that is crucial for expansion, profitability, and cost-cutting measures. Companies with the right systems in place will effectively manage the resulting federal complexities to deliver on regulatory expectations and capture a competitive market share.

Leverage Regulatory Frameworks and Technology from the Food Industry

The Canadian example demonstrates clearly that the regulatory frameworks from the food and beverage industry are the most applicable to the cannabis sector – more so than for pharmaceuticals, nutraceuticals or alcohol. This is most obvious in lucrative value-added markets like edibles and extracts, which are actually also food products.

Issues like dosage standardization, controlling common hazards, managing traceability chains and inventory, and introducing quality standards (including third party certifications like organic and SQF) are all crossovers from the food industry.

Just as the compliance automation wave has hit the food industry in recent years, manufacturers of infused products and extracts can then use the same technology to reduce safety and quality control costs as well as documentation and administrative costs. The lesson? Cannabis industry leaders don’t need to totally reinvent the wheel.

Cannabis Producers Need an ERP System Tailored to Their Needs

In Canada, cannabis manufacturers have learned all too well what a few little mistakes can do to reputation and profitability. MJBiz Daily reported in 2021 that the Canadian government had issued more than CDN $1.3 million (USD $1 million) in fines since legalization. That’s a lot of regulatory compliance issues. Considering there are nearly 500 compliance fields to fill out for monthly reporting, mistakes are difficult to avoid, especially if you rely on a manual system.

The story is similar in the United States. State regulatory compliance management requirements are complex and arduous for individual companies and employees. When federal regulation does come, US-based producers will very likely face even more strenuous reporting requirements to multiple jurisdictions.

Cannabis companies will need a data-driven system in place to align with the FDA’s Cannabis-Derived Products Data Acceleration Plan. Finding food safety and traceability software that makes reporting easier, automatic, and less prone to human error is paramount to success. As you prepare for the looming federal legislation, look for an ERP system that covers all the bases, including one that:

Improves Market Agility: Expedites opening new facilities in new markets as they come online
Evolves with Regulatory Changes: Facilitates the transition from unregulated markets into federally regulated ones
Automates Reporting: Protects you from regulatory compliance management bumbles stemming from manual input and human error
Reduces Workload: Optimizes workflow and reduces labor costs associated with manual input
Is Comprehensive: Covers all bases, including food safety, quality control, traceability, production management, and even occupational health and safety

If you aren’t automating the capture of essential information across the entire operation, you won’t be prepared for the regulatory burdens likely to come with federal cannabis legislation. To stay compliant and on top of what will likely be an incredibly competitive marketplace, you are going to need real-time data — data that will provide precise seed-to-sale traceability, product recall capability, and reporting.

Digitizing safety, traceability and complex production management through one state-of-the-art ERP system allows cannabis companies to reap the rewards of data-driven, automation technology almost immediately without the significant capital expenditure on large-scale equipment or robotics. From there, navigating regulatory complexity becomes not only streamlined and operationalized, but an actual market advantage for future growth.

Petri dish containing the fungus Aspergillus flavus

March 9, 2022

Salmonella & Aspergillus: Controlling Risk in Your Supply Chain

By Cameron Prince

No Comments

Risk management is the process of identifying potential hazards, assessing the associated risk, then implementing controls to mitigate those risks. With Salmonella and Aspergillus being two of the leading causes of cannabis contamination that can occur throughout the supply chain, applying upstream risk management strategies can keep supplier contamination issues from impacting your products.

In recent months cannabis products have been recalled for Salmonella and/or Aspergillus contamination in several states, including California, Arizona, Michigan, Florida, as well as Canada. While the recalls impacted retail products, in most cases, the contamination occurred farther back in the supply chain, as evidenced by recalls that impacted several dispensaries or other sales locations.

For example, the November 2021 Arizona recall caused multiple establishments and dispensaries to recall product due to possible contamination with Salmonella or Aspergillus; the Michigan recall of an estimated $229 million in cannabis products due to “inaccurate and/or unreliable results of products tested.” While a lab lawsuit against the recall released some of the product to market, the companies faced significant impact – in both removing and returning the product.

While microbial contamination can occur throughout the supply chain, Aspergillus is ubiquitous in soil and the flower, leaves, roots of the cannabis plant are all susceptible to such contamination. The mold also can colonize the bud both during growing and harvesting. Salmonella can be introduced during growing through, untreated manures, direct contact with animal feces, or contamination of surface water used for irrigation. However, the plant matter also can be compromised during drying, storage and processing from environmental contamination.

Supply chain risk management. To prevent a supplier’s contamination issues from becoming your problem to deal with, each facility at each step of the chain should develop a supply chain risk management program to assess and approve each of its upstream providers. Following are 5 key steps to assessing and managing risk in your supply chain:

Conduct a hazard analysis. A complete supply chain assessment should begin with a hazard assessment of all the ingredients, products or primary packaging you receive. There are two essential steps involved in conducting a hazard analysis: that is the identification of potential hazards – considering those related to the item itself, as well as the supplier environment and process as well as item – and an evaluation to determine if each hazard requires control based on its severity and likely occurrence.
Evaluate the risks. Based on the hazard analysis, the next step is to determine the associated risk. As defined by the European Food Information Council (EUFIC), “a hazard is something that has the potential to cause harm while risk is the likelihood of harm taking place, based on exposure to that hazard.” For example, the higher the exposure, the higher the risk.
Ensure risk control. Once risk is determined, it is critical to ensure that it is being controlled, who is controlling it and how it is being done. Depending on the risk, that control may need to be conducted by the supplier, by you or even by a downstream customer.
Require documentation. No matter which step in the chain is controlling the risk, it is essential that all be documented with records easily accessible – including the controls, any out-of-compliance events and corrective actions. The adage, “If it’s not documented, it didn’t happen,” is very applicable here, particularly should a problem arise and an inspector appear at your door.
Use only approved suppliers. Implementation of the above steps enable the development of a supplier approval program focused on quality, safety and regulatory compliance. Use of only suppliers who have been assessed and found to meet all your standards will help to protect your product and your brand.

Salmonella and Aspergillus contamination can occur throughout the supply chain, but implementing a supply chain risk assessment and management program will enable you to determine where the greatest risks lie among your ingredients and suppliers, allowing you to allocate resources based on that risk.

March 9, 2022

USDA’s Hemp Testing Rules: Fast Track Your Lab’s Preparedness with Digitization

By Martha Hernández

No Comments

The United States Department of Agriculture (USDA) issued a Final Rule (FR) on hemp testing that went into effect on 22^nd March 2021. Consequently, all hemp testing laboratories must familiarize themselves with what is stipulated in the FR and do all that is required to comply.

The 2014 Farm Bill put to an end to years of hemp prohibition, at least to some extent. It also paved the way for the 2018 Farm Bill that brought hemp at par with other agricultural crops. States, through their departments of agriculture and institutions of higher learning, were allowed to cultivate industrial hemp for research purposes, under what was called the hemp pilot programs. Some states also allowed individuals to cultivate hemp to investigate the economic and agronomic viability of the crop. This increased the acreage of industrial hemp from zero to about 90,000 by 2018 when the Agricultural Act that legalized hemp was passed. Some of the states that participated in this program included Colorado, Kentucky, Montana, and Oregon.

As expected of a new project, some challenges cropped up, including:

Inconsistency in the quality of hemp produced for research
Varying hemp laws between states
Maintaining regular supplies of inputs such as seeds and pest control
Lack of appropriate knowledge and technology

The 2018 Farm Bill addressed some of these challenges through the Hemp Farming Act that proposed to remove hemp from Schedule 1 of the Controlled Substances Act. Hemp, in this case, refers to cannabis sativa that contains less than 0.3% THC by “dry weight.” Proposals in the hemp act were incorporated into the 2018 U.S. Farm Bill and it became law in December 2018, thus making hemp legal at the federal level.

Unlike other agricultural commodities, hemp is a highly regulated crop because of its close association with cannabis which is still under Schedule 1 controlled substances. Once hemp exceeds the 0.3% THC threshold, it becomes classified as cannabis and is, therefore, governed under a different set of regulations.

The next step after the legalization of hemp was to roll out a nationwide hemp cultivation and distribution program. Consequently, the U.S. Food and Drug Administration (FDA) was instructed to develop a national framework to regulate the production of hemp in the U.S. An Interim Final Rule (IFR) was published in October 2019 to set the ball rolling. A final rule was published as an improvement of the IFR in January 2021. The Final Rule was created based on public comments received during the period as well as direct lessons learned in the 2020 growing season. The Final Rule took effect on 22^nd March, 2021.

A schematic representation of the key federal rules for hemp testing laboratories (Figure courtesy of CloudLIMS)

The USDA requires that all hemp be tested by a third-party laboratory to ensure that quality is maintained and that the THC threshold is not exceeded. The Final Rule made significant changes to the USDA’s hemp testing rules that will affect how laboratories carry out their operations. While the guidelines were issued on January 15, 2021, they went into effect on March 22 of the same year. If you are a hemp-testing laboratory, here are the most important changes that you should brace for.

Nine Changes Hemp Testing Labs Must Comply With

Changes in sampling

Previously, samples to be tested were restricted to the top third portion of the hemp plant. With the Final Rule, samples can be taken anywhere from 5-8 inches from the main stem (including the leaves and flowers). This provision offers greater flexibility and reduces the chances of “hot” hemp.

Laboratories shall use specific testing methods

According to the Final Rule, hemp-testing laboratories must use reliable methods to test for THC concentration. This includes methods such as post-decarboxylation; they take into consideration the conversion of THCA to THC after decarboxylation. Currently, methods that meet these requirements include gas chromatography and liquid chromatography.

The USDA also expects that laboratories demonstrate consistent testing reliability and validity. The test methods used must have high specificity for THC and other tested compounds.

Negligence limit raised to 1% THC

Negligence limit refers to the extra wiggle room that is advanced to hemp farmers in regards to THC testing. In the IFR, hemp that tested above 0.3% THC but lower than 0.5% was considered negligence and not a violation of federal laws. This limit for negligence has now been pushed from 0.5% to 1%. As much as the Final Rule has maintained the THC limit for hemp at 0.3%, growers now have a wider margin of error to work with.

For hemp-testing laboratories, all samples that test above 0.3% THC are still considered hot hemp and must be destroyed or remediated. However, samples testing below 1% THC are considered a negligent violation and not a criminal offense.

All hemp testing laboratories need to be DEA registered

The Final Rule made it mandatory for all hemp-testing laboratories to be registered with the Drug Enforcement Agency (DEA). Getting this registration is time intensive and the number of registered laboratories is few. With this in mind, the USDA had extended the registration deadline to the last day of 2022. After the expiry of this period, laboratories that are not registered with the DEA will be barred from conducting hemp testing.

Laboratories to calculate Measure of Uncertainty (MU)

With the Final Rule, laboratories are expected to calculate and include the MU when reporting test results. The Guide to the Expression of Uncertainty in Measurement (GUM) defines MU as “a parameter, associated with the result of a measurement, which characterizes the dispersion of the values that could reasonably be attributed to the measurand.”

While there is no upper or lower limit for the MU, it is controlled using performance standards such as AOAC Standard Method Performance Requirements. Organizations such as ISO and Eurachem also provide guidelines for calculating MU. Hemp testing laboratories can refer to those guidelines as well.

Adherence to the ISO 17025 standards

While this is not an enforceable rule, the USDA strongly recommends all hemp testing laboratories be ISO 17025 compliant.

Laboratory SOPs

Testing laboratories must have an internal SOP for testing and retesting hemp. This SOP should be available upon request by state sampling agents or other responsible agents. Laboratory managers should ensure that all staff members follow the SOPs.

Reporting of THC

Once a laboratory has completed the test, whether failed or passed, they should share the results with all stakeholders:

The licensed producer
The appropriate State Department of Agriculture or Tribe
The USDA using AMS Form 22.
The THC should be reported on a “dry weight” basis.

Remediating and retestingof hot hemp

Once a laboratory finds a sample that has tested above 0.3% THC, it has to flag it as “hot” hemp. Previously, all hot hemp had to be destroyed but with the FR, parts of the hemp (excluding the flowers) can be salvaged.

A Laboratory Information Management System (LIMS) to manage multi-analyte test results and flag hot hemp (Figure courtesy of CloudLIMS)

The licensed producers (LP) are required to shred the hemp into biomass and send a sample back to the laboratory for retesting. The laboratory shall use the same procedure to retest the biomass and report the results back to the LP and the USDA.

The hemp final rule took full effect on the last day of 2021. The only extended deadline is the one requiring that all hemp-testing laboratories be registered with the DEA that still has a few more months to go.

Fast Track Your Laboratory’s Preparedness with a LIMS

Becoming compliant with USDA’s hemp testing rules can be quite challenging for a laboratory simply because there’s too much to keep up with. A laboratory must monitor samples, analyze and report test results, and at the same time maintain internal quality protocols.

Fortunately, digitization can help streamline processes and accelerate the preparedness of laboratories for the new federal rules. A cloud-based Laboratory Management Information System (LIMS) takes the hard work out of compliance by keeping track of compliance processes seamlessly and in real-time.

A LIMS enables laboratories to:

Track samples through their lifecycle
Automatically share results with stakeholders
Flag hot hemp samples
Generate certificates of analysis (COAs) in prescribed formats
Meet regulatory compliances
Manage SOPs, staff training, and QA/QC protocols

Hemp that tests above the 0.3% THC mark is considered cannabis and is therefore illegal under federal law. Consequently, hemp testing is a highly sensitive process that is strictly regulated. Hemp-testing laboratories must optimize their processes to ensure efficiency at all times and assure the validity of their test results. This can be made possible with a LIMS.

March 4, 2022

There’s More to Sustainable Packaging than Meets the Eye

By Balaji Jayaseelan

No Comments

People today are more eco-conscious than ever. The last several years have seen a growing awareness of the impact of human behavior on the environment, and COVID-19 brought real-life context to the catastrophic effects of a global crisis. Lifestyle changes during the pandemic empowered people to make choices with a positive impact for the collective good. In a June 2021 PricewaterhouseCoopers survey , half of global consumers said they’ve become more eco-friendly since the COVID-19 pandemic. Consumers are changing their behaviors, educating themselves about the businesses they support, and evaluating the products they buy through a “green” lens. Terms like circular economy, zero-waste, ESG and carbon footprint are now part of the common vernacular, and sustainability is no longer a nice-to-have but a business imperative.

Cannabis consumers, in particular, value sustainability. They are conscientious of what they’re putting into their bodies and the planet. There is increased interest in brands and businesses that use responsible growing practices, eco-efficient manufacturing, and sustainable packaging. In a nationwide survey conducted by Canivate Growing Systems, 79% of U.S. cannabis consumers said they support establishing environmental standards. And in 2021, the Sustainable Cannabis Coalition (SCC) was formed to promote sustainability best practices.

Sustainable packaging is an important way that brands can show a commitment to the environment. Packaging is a highly visible and tangible representation of your brand and one that matters to consumers. A July 2021 Adweek/Morning Consult poll found that 77% of consumers believe it is the brand owners’ responsibility to make sure their packaging is recyclable. According to Nielsen, of the top five sustainability attributes consumers are willing to pay more for, three are packaging-focused: Recycled packaging, reduced packaging and reusable packaging. While cannabis packaging has unique regulatory requirements and safety guidelines, it can still be eco-friendly. Sustainable cannabis packaging has the necessary properties to protect against moisture and maintain freshness and smell. It can also be child-resistant and include other unique cannabis functionalities.

When it comes to sustainable cannabis packaging, that which you may believe to be the “greenest” option may not be sustainable at all. Many factors go into this determination, including packaging material, weight, distance traveled from supplier to manufacturer, water and energy usage and more. At Berlin Packaging , we take a comprehensive and integrated approach to sustainability to ensure our solutions meet customer objectives and consumer expectations. We use life-cycle analysis to quantify a product’s environmental impact throughout its entire life cycle, including sourcing/raw materials extraction, manufacturing, distribution and end-of-life. This analysis ensures that the solutions we provide are effective, impactful, and don’t contribute to greenwashing.

One key pillar of sustainable cannabis packaging is material circulation – using recycled and recyclable plastics and alternative materials. It’s important to understand that not all plastics are created equal. HDPE and PET are fully recyclable and have a ~30% recyclability rate. Polypropylene, on the other hand, while recyclable, only has roughly a 3% recyclability rate. Color can also play a role. PET is valued for its transparency, so colored and opaque plastics are not considered recyclable.

Continuous innovation and technological improvements have contributed to several eco-friendlier plastic packaging solutions. One popular choice for many of today’s brands is post-consumer recycled (PCR) materials. Using recycled plastic reduces single-use plastic waste that fills our landfills and threatens our waterways. Bio-plastics, made using renewable plant-based materials, are another sustainable option. Berlin Packaging has partnered with numerous premium packaging manufacturers to provide sustainable solutions for our customers. Many of our offerings – suitable for flower, pre-rolls, edibles, concentrates and more – can be produced using PCR or bio-plastics.

Material circulation means using recycled and recyclable plastics and alternative materials.

We’re also seeing brands embrace new compostable, biodegradable and paper packaging options. Berlin Packaging offers pre-roll tubes that are 100% compostable in industrial or municipal facilities and are better for the environment while also protecting the product inside. With zero migration, zero odor, and zero visibility, these air-tight tubes maintain freshness and meet regulatory requirements. We also offer a variety of paper tubes for pre-rolls, vape carts, and flower that are reusable, recyclable, and biodegradable.

Other sustainable packaging strategies include refill & reuse systems, which have gained popularity over the past several years, especially among personal care categories. Other tactics to consider when evaluating your package’s sustainability scorecard are eliminating unneeded packaging components like outer wraps and neck seals, ensuring labels are recyclable, and lightweighting (reducing the weight of your package). Berlin Packaging evaluates all of these avenues when developing sustainable packaging solutions.

Beyond the packaging itself, we encourage our customers to consider aligning their branding design and on-pack messaging to tell their sustainability story. We’re seeing many brands elevate their packaging sustainability benefits on their packaging’s primary display panel. The How2Recycle labeling program is another tool that helps educate consumers about how to dispose of packaging to ensure it gets recycled properly. Berlin Packaging’s sustainability specialists assist companies with comprehensive messaging strategies. Given the rise of greenwashing and consumer confusion and skepticism, effective and impactful messaging is a critical part of a sustainable packaging strategy.

Working with packaging suppliers and design partners who understand the cannabis market and have sustainability expertise is key to a brand’s success. A holistic approach that considers consumer insights, design functionality, aesthetics, manufacturability, regulatory requirements and sustainability results in packaging solutions that grow sales and build brand loyalty.

March 3, 2022

Busting the THC Myth: When it Comes to the Best User Experience, Terpenes Reign Supreme

By Mark Lange, PhD

No Comments

The scent of pine from your Christmas tree. The fragrance of a ripe summer peach at the farmer’s market. The whiff of eucalyptus and lavender that greets you when you enter a spa.

Aroma is a keystone in how we experience the world. In any given environment, aroma can help shape your mood, solidify memories and instantly transport you to another place or time.

I have focused my career on studying the fascinating compounds that are often behind these powerful aromas: terpenes. They form the largest class of natural products (compounds produced by living organisms), found in nearly all living beings. There are around 50,000 currently known terpenes in nature — with potentially thousands yet to be discovered.

Terpene-rich plants you might be most familiar with are lavender, mint, oranges (in the peel), and yes, cannabis. In recent years, terpenes have rightfully become a central discussion in the recreational cannabis world. This is because terpenes — not THC level, not “Indica-Sativa” classification — are a key determinant of cannabis’s effect, both psychoactive and non-psychoactive. But the current lack of prioritization and understanding of the crucial role terpenes play may put the collective quality of U.S. cannabis at risk.

At this crucial inflection point for legal cannabis, on its path to becoming a $70 billion dollar global industry by 2028, we need to ensure that everyone across the cannabis space, from breeders to testers, growers and consumers, understands which traits to prioritize for a cannabis world brimming with diversity and predictable effects.

What the cannabis industry has to lose

What do we lose if the cannabis industry continues to scale without a clear understanding of the compounds that define the uniqueness of each variety?

There is a ripple effect across the ecosystem. For cannabis testing labs, focusing on only twenty of the most dominant terpenes means we are missing out on tapping into potentially over a hundred of less common terpenes in cannabis. For the cannabis consumer, lack of understanding on the breeding and testing side may make it difficult to find cannabis that delivers on its promised effect time and time again. And, most detrimentally for breeders, not understanding the direct correlation between genetics and the formation of terpenes means we will have increasingly fewer terpene profiles and combinations to work with, especially when the industry-dominant focus has been on cannabinoid potency.

Let’s explore some misconceptions related to potency. In recent years, many breeders have prioritized high THC levels over genetic diversity. Consumers often associate high THC levels and that telltale strong “skunky” aroma with a strain’s quality and effect, when in reality, these are poor indicators of potency. (In fact, recent research indicates that this specific cannabis aroma is caused by a family of sulfur compounds.) Terpene profiling is a much more accurate way to determine a variety’s given effect. In focusing too much on increasing THC, breeders miss out on the true potency powerhouse: tapping into the terpene diversity that’s out there.

Terpenes are responsible for giving flowers (including cannabis), fruits and spices their distinctive flavors and aromas. Common terpenes include limonene, linalool, pinene and myrcene.

To illustrate the impact of breeding practices that prioritize crop yield over product quality, I first have a question for you: When was the last time you enjoyed a really good tomato?

If you’re lucky enough to have a great farmer’s market nearby, maybe you purchased an heirloom tomato at peak freshness last August. It was likely fragrant, flavorful and didn’t need much preparation to be enjoyable.

Or maybe you can’t remember the last time you’ve eaten a good tomato, as the last standard grocery store tomato you purchased was watery, tasteless and essentially scentless.

Tomatoes are a prime example of what is unfortunately true for a whole host of traditional crop plants in the U.S. When yield is the goal, flavor and aroma profiles often suffer. The culprit: lack of genetic diversity in the breeding process. The tragedy of the tomato serves as a harbinger for the cannabis industry — and we can draw parallels to what we’ve seen happen to cannabis.

What the cannabis industry should do: Tap into the diversity that’s out there

An important aspect of preventing cannabis from going the way of the tomato is to better understand the genes that generate these different terpene profiles. Different cultivars with varying aromas will hold different collections of genes. We as an industry must learn more about which terpenes correlate with desirable aromas, and then access already existing genetic diversity.

We have just begun to scratch the surface of the potential of terpenes in cannabis. With the right alignment across the industry and a stronger focus on genetics in breeding, we will see the rise of completely unique cannabis varieties. They will smell like lavender, lilac, orange peel or even brand-new aromas that have yet to be discovered. To ensure this future, we need to prioritize the right traits and the right genetics.

March 1, 2022

Medicinal Genomics Salmonella and STEC E. coli Multiplex Assay Certified by AOAC

By Cannabis Industry Journal Staff

No Comments

Medicinal Genomics announced today that they have received AOAC International certification for their PathoSEEK® Salmonella and STEC E. coli multiplex assay. In combination with their SenSATIVAx® extraction kits, labs can simultaneously detect Salmonella spp. and STEC E. coli with a single qPCR reaction for flower, concentrates and infused chocolates using the Agilent AriaMx and the BioRad CFx-96 instruments.

The certification came after the multiplex assay was validated according to the AOAC Performance Tested Method Program. According to the press release, the PathoSEEK platform now has more cannabis matrices accredited for Aspergillus, Salmonella, and STEC E. coli than any other product out on the market, according to their press release.

The PathoSEEK microbiological testing platform uses a qPCR assay and internal plant DNA controls for reactions. The two-step protocol verifies performance while detecting microbes, which allegedly helps minimize false negative results from human error or failing conditions.

“AOAC’s validation of our Salmonella/STEC E. coli assay across the various cannabis matrices is further proof of our platform’s robustness and versatility,” says Dr. Sherman Hom, director of regulatory affairs at Medicinal Genomics. “We are excited that our PathoSEEK^® platform is moving in concert with the FDA’s new blueprint to improve food safety by modernizing the regulatory framework, while leveraging the use of proven molecular tools to accelerate predictive capabilities, enhance prevention, and enhance our ability to swiftly adapt to pathogen outbreaks that could impact consumer safety.”

March 1, 2022

Emerald Cup Launches New Classification System

By Cannabis Industry Journal Staff

1 Comment

The 2022 Emerald Cup Awards will look a little different this year. The competition is adopting a new classification system for different strains of flower, going well beyond the conventional and outdated sativa and indica categories.

Developed by Napro Research in 2013 and supplemented with more than 250,000 terpene tests by SC Laboratories, the PhytoFacts® classification system uses the chemometrics of cultivars to categorize different strains of cannabis, largely based on terpenes, flavor and effects.

The classification system puts different cultivars into six different umbrella categories: Jacks and Hazes; Tropical and Floral; OGs and Gas; Sweets and Dreams; Dessert; and Exotics. “Terpenes, however, with their unfamiliar names and mysterious effects, have mostly added another layer of consumer confusion already complicated by overly broad Indica/Sativa/Hybrid terminology, whimsical strain names, irrelevant THC/CBD percentages, and other ambiguous factors that make the process of selecting the best or correct strain, a less-than-satisfying ordeal for even the most experienced cannabis connoisseurs,” reads the press release.

The names for the six different categories were decided on using current industry-standard terminology, expanded upon with tasting notes, effects common strains, and of course, the primary terpenes. The Emerald Cup believes this will help the industry move forward with a more accurate classification system, revolutionizing how we think about cannabis.

“Together we hope to empower a better way for consumers to understand the range of flavors, aromas and effects within Cannabis, and bridge the gap between what legacy has always known with regards to terpene content defining quality,” says Alec Dixon, co-founder of SC Laboratories. “We need to move away from this fixation that dispensary buyers and consumers have on delta-9 THC, which is currently blurring the lines between craft and corporate cannabis, and is homogenizing cannabis genetics and leading to the loss of biological diversity within Cannabis.”

February 23, 2022

Cannabis Quality Conference Dates, Location Announced

By Cannabis Industry Journal Staff

No Comments

EDGARTOWN, MA, Feb. 21, 2022 – Innovative Publishing Company, Inc., the publisher of Cannabis Industry Journal, has announced the return to in-person events with the Cannabis Quality Conference & Expo (CQC), taking place October 17-19, 2022 at the Hilton in Parsippany, New Jersey. Presented by Cannabis Industry Journal, the CQC is a business-to-business conference and expo where cannabis industry leaders and stakeholders meet to build the future of the cannabis marketplace.

“Cannabis markets in New Jersey, New York, Connecticut, Pennsylvania and Massachusetts are all beginning to get off the ground,” says Aaron Biros, editor of Cannabis Industry Journal and director of the Cannabis Quality Conference. “Taking place in a pivotal year for the cannabis industry and in a location surrounded by new market opportunities, the CQC will deliver hands-on education, networking and business discussions. The venue setting, just a short train ride from New York City and Newark International Airport, coupled with highly focused content, creates a unique business meeting environment.”

The 2022 program will have three separate tracks of educational presentations and panel discussions, focused on Regulations & Policy, Safety & Quality and Business & Operations.

Due to safety protocols and venue restrictions, limited space is available for sponsors and attendees. The CQC is a hybrid event, meaning attendees will have the option to either attend in-person in New Jersey, or attend remotely via the virtual platform. Registration is now open. Click here to stay up to date on lodging, early bird pricing, keynote announcements and more.

The CQC is co-located with the Food Safety Consortium, which will take place immediately following the CQC, October 19-21, 2022. For sponsorship and exhibit inquiries, contact RJ Palermo, Director of Sales, and Chelsea Patterson, Account Executive.

About Cannabis Industry Journal

Cannabis Industry Journal is a digital media community for cannabis industry professionals. We inform, educate and connect cannabis growers, extractors, processors, infused products manufacturers, dispensaries, laboratories, suppliers, vendors and regulators with original, in-depth features and reports, curated industry news and user-contributed content, and live and virtual events that offer knowledge, perspectives, strategies and resources to facilitate an informed, legalized and safe cannabis marketplace.

About the Cannabis Quality Conference & Expo

The Cannabis Quality Conference & Expo is an educational and networking event for the cannabis industry that has cannabis safety, quality and regulatory compliance as the foundation of the educational content of the program. With a unique focus on science, technology, safety and compliance, the “CQC” enables attendees to engage in conversations that are critical for advancing careers and organizations alike. Delegates visit with exhibitors to learn about cutting-edge solutions, explore three high-level educational tracks for learning valuable industry trends, and network with industry executives to find solutions to improve quality, efficiency and cost effectiveness in the evolving cannabis industry.

February 23, 2022

SC Laboratories Partners with Agricor & Botanacor

By Cannabis Industry Journal Staff

No Comments

This week, three companies in the cannabis testing space announced a partnership: Agricor Laboratories, its sister company Botanacor Laboratories and SC Laboratories will join forces to work together on comprehensive cannabis and hemp testing throughout the United States. The press release says that this partnership creates the foundation for a national testing network, offering comprehensive cannabis and hemp lab testing.

Agricor and Botanacor laboratories, founded in 2014, are sister companies headquartered in Denver, Colorado. SC Labs, founded in 2010, is based out of Santa Cruz, California. They say the partnership will bring value to cannabis and hemp industry stakeholders by offering a broader range of testing resources, better data collection and delivery, instrument redundancy, increased testing capacity and improved turnaround times.

“Agricor, Botanacor, and SC Laboratories have well-earned reputations for delivering high-efficacy results, through a ‘science-first’ approach to product quality, safety, and compliance,” says Dr. Carl Craig, CEO of Agricor and Botanacor. “With operations in Colorado, California, and Oregon, the newly combined operation is uniquely positioned to support multi-state cannabis operators, as well as hemp producers within the U.S. and throughout the world.”

Each lab is ISO 17025 accredited and have become known as leaders in the hemp testing market, offering a wide range of tests to meet state regulations in every corner of the United States. Last year, SC Labs debuted their comprehensive hemp testing panel, claiming they could meet testing standards in every state in the country.

“This combination creates the largest specialized resource in North America that is committed to delivering exceptional testing results that empower smarter growing, manufacturing, and consumer decision making,” says Jeff Gray, CEO of SC Labs. “By combining these reputable science organizations, we’ve taken major steps toward creating a laboratory network that is dedicated to improving the safety of cannabis products for all consumers, globally.”

According to Gray and the press release, the team is setting their sights on the global market, beyond just the United States. “The organization is focused on continued expansion via acquisition and organic entry to new markets – all with the focus on best serving customers’ needs across North America and supporting a growth market where testing can help deliver confidence to consumers,” reads the press release.