Tag Archives: monitor

November 23, 2022

The 3-Legged Stool of Successful Grow Operations: Climate, Cultivation & Genetics – Part 3

By Phil Gibson

This is Part 3 in The 3-Legged Stool of Successful Grow Operations series. Click here to see Part 1 and here to see Part 2. Stay tuned for Part 4, coming next week.

The Right Build Out

Aeroponic & hydroponic systems grow plants at a highly accelerated rate. A “clean room” type of construction approach is the best way to manage this type of grow operation. Starting with a facility that is completely void of any kind of wood or materials that are porous is a good start. Cellulose materials collect moisture and encourage mold and mildew formation no matter how good the sealant.

We have seen cultivation spaces built out of dry wall over wooden post construction and studs that look sealed and solid on the outside of walls but when repaired for plumbing or other expansion work, they are black inside and covered with nasty mold that no one wants near their grow space.

Panel construction over steel frames or steel studs with skins is a safer, more sterile approach than retrofitting a wooden structure. Panel construction offers the added benefit of rapid assembly and minimal labor costs. We have seen 300 light rooms assembled in a few days so it is both very cost effective and safely sealed for protected growth.

Room Sizes & Count

How do you best fill this space if you have a clean slate?

If you have unlimited space, temperature and humidity management should determine the room sizes in your facility. Room sizes that are square in dimensions tend to be easier to maintain from an environmental standpoint. Long narrow rooms are good for fan airflow but tend to be more expensive from a cooling and dehumidification point of view. The larger the room, the more likely that you will get “microclimates” within the room which can challenge yield optimization.

Now, of course, many grows are retrofits of existing structures so compromises can be necessary. We have found that cultivators that have both very large and mid-size rooms in the same facility (200 lights versus 70 lights) are consistently more successful in the 70 light rooms. These “smaller rooms (~1,500 ft2) out-yielded and out-performed the larger rooms using the same genetics and grow plans. Compartmentalization also minimizes the risk in the case that a calamity (i.e. pest infestation) strikes the room. In a large room scenario, the losses can damage your operation. For this reason, we recommend 70-100 light/tub rooms as a standard.

Rooms should also follow your nursery economics. Structuring your nursery to produce just enough clones/veg plants for your next flower room avoids wasted plant material and resources. Breaking a larger space down into individual rooms means that you need fewer veg plants to fill your flower room that week. The best way to optimize this is to have a number of rooms that are symmetrical with the number 8 (typical 8-week cycle genetics).

With 8 rooms running flower, you are able to plant one room per week for 8 weeks. In the 9^th week, you start over on room 1. This continuous harvest process is highly efficient from a labor standpoint and it minimizes the size of your mothers room (cost center). Additional space can be applied to your flower rooms. If you do not have infinite space, even divisors work just as well; 2 or 4 rooms can be planted in sequence for the same optimization (for 2-room structures, harvest and replant 1 room every 4 weeks for example). The optimal structure (8, 16, 24, or more rooms) enables you to optimize your profitability. If any of this needs further explanation, please just ask.

Not photoshopped: An “ideal” 70-tub flower room in a CEA greenhouse (courtesy of FarmaGrowers, South Africa)

Within your room choice, movable rows or columns of tubs/lights also provides optimal yields. Tubs/plants can be moved together for light usage efficiency and one 3-foot aisle can be opened for plant maintenance. Racking systems or movable trays/tubs make this convenient nowadays.

Floors

Concrete floors offer pockets for bacteria to collect and smolder. As such, they have to be sealed. Proper application of your sealant choice is required so that it does not peal up or crack after sealing. There are many benefits to sealed floors that is discussed in the white paper. Floor drains are the equivalent of a portal to Hell for a sterile grow operation. Avoid them at all costs.

Phased Construction

Tuning or optimizing you grow rooms for ideal flowering operation depends on your location. Our advice is that you build and optimize your facility in phases with the expectation that nothing is perfect and you will learn improvements in every phase of expansion. The immediate benefit is production that you can promote to your sales channels and revenue that starts as soon as possible to improve your profitability. This is also an excellent learning curve to apply to subsequent rooms. Our happiest customers are those that learned construction improvements in early rooms that were able to be applied to following rooms without headache. The ability to focus on one or two rooms also allows you to get the recipe correct rather than just relying on “winging it”.

Don’t Be In A Rush To Go Green

A 70-tub flower room (courtesy of FarmaGrowers, South Africa)

Validate your water supplies and their stability. Verify that the water in your aeroponic or hydroponic feeds that get to your plants are clean and sterile. This is much easier in a step-by-step fashion than in a crisis debug mode once production is in progress. Be very cautious about incoming clone supplies. We will talk about this more in the next chapter on Integrated Pest Management but incoming clones are a top pest vector that can contaminate your entire facility.

Warehouse Versus Greenhouse Cultivation Spaces

As we started out, controlling your environment is your most important concern. We have seen success in both indoor rooms and greenhouses. The defining success factor is controlling humidity and temperature. Modern sealed controlled environment (CEA) greenhouses do this well and CEA is somewhat of a given for indoor grows. More details on this in the white paper.

Packaging these recommendations gets you to the perfect body for your Formula 1 race car. Now, you are ready to look at some of the mechanics of protecting your operation from pesky little critters and biologicals that can derail your operation and weaken your engine.

Before we sign off this week, I wanted to highlight the ultimate build-out that we have seen so far. Of course, there are many challengers that have done this well but at this point, FarmaGrowers in South Africa has the best thought out facility we have seen. They acquired Good Manufacturing Practice (GMP) & Good Agricultural & Collection Practice (GACP) certification early in their operations due to very well-thought-out designs. They are exporting to global markets without irradiation today. Certainly, many successful customers have beautifully thought-out operations and there are several upcoming facilities that offer amazing planning that will challenge for this crown, but for now. FarmaGrowers leads the pack in this aspect. See here for a walkthrough.

To download the complete guide and get to the beef quickly, please request the complete white paper Top Quality Cultivation Facilities here.

Stay tuned for Part 4 coming next week where we’ll discuss Integrated Pest Management.

October 31, 2022

The 3-Legged Stool of Successful Grow Operations: Climate, Cultivation & Genetics – Part 1

By Chris Wrenn, Phil Gibson

2 Comments

Ideal cannabis profits come from high demand/high selling prices and low production costs. The spread between those two, or margin, can determine the life or death of your business. We want to share this series of articles so that your next investment can be highly successful and high margin out-of-the-box.

Regardless of the grow method (soil, coco, rockwool, hydro or aero), every plant performs best in its own ideal environmental conditions. Experienced growers gained success through hard work, and just that, experience. Many have tried more advanced grow technologies, but shied away due to early trial failures or the complexity of maintaining chemistry across a grow facility. The wonderful thing now is that precision sensors and software controls eliminate the risk to robust healthy plants and harvest success. Growers are now able to both manage production while performing research in line with their operations.

We have learned a great deal working with our grow partners over the last 6 years. Every grow facility and location are different due to local weather, business environment and scale. This series of articles and guide, authored by our expert, Christopher Wrenn, will include recommendations of the most successful approaches we have seen here in North America and all over the world.

A 4-Layer fully aeroponic flower room using movable racking systems

Building top-quality cultivation facilities is no simple task. Cultivators are also looking for new help as they shift from older soil or media approaches to more efficient grow methods. One powerful method is aeroponics, which is very good at growing any type of plant in air in a sterile environment, with labor, nutrient and water savings.

Where possible, we will share key vendors that support healthy grow operations and (since it is World Series Time), customer examples that are knocking it out of the park. In today’s competitive business environment, it is critical to do what we can to increase profitability and survival in the face of steep headwinds. We want you to crush it and be “the last man standing.”

So, let’s get to it.

Climate: Environmental Control

We begin with a critical leg in your environment. The process of photosynthesis is more than just light, plant and moisture. We want to do more than just grow plants. We want to grow highly profitable plants. That means we have to accelerate photosynthesis so we are growing faster, bigger and more potent than our competitors.

The Vapor Pressure Deficit (VPD) is the amount of “drying power” available in the air surrounding your plants. This is a useful way to understand the amount of moisture your atmosphere can remove from your plants as they digest carbon dioxide and aspirate water and oxygen into the air around your plants. A higher vapor deficit is a good thing for growth; It is also a measurement of how much nutrient you can uptake into the plant roots and convert into size and potency in the canopy. We recommend that you have resources in your grow rooms to maintain your environment to within 5% of both your humidity and temperature targets for ideal results.

Onyx Agronomics is a Tier 3 indoor cultivator in the State of Washington. This is the canopy in one of their 8 flower rooms.

In our Top Quality Cultivation Facility white paper, we review environmental settings for temperature and humidity for mother, clone/veg and flower rooms for day and night light cycles from early cuttings through to end of harvest flush. Day temperatures can be up to 20% higher than night temperatures for example.

Cooling

Managing temperature may seem straight-forward but the heat generated by LED lights, HPS lights or the sun will vary across rooms, time exposure and with the distance of the light source from the plants. Measurement sensors should be distributed across rooms to monitor and trigger temperature resources.

Humidification/Dehumidification

This is a topic that can be underappreciated by cultivators. It is important to slowly transition humidity as you move plants from cuttings to clones, to veg and to flower. Beginning in a very humid stage to motivate root start, humidity will be stepped down from an opening near 90% down to an arid 50% in your end of flush flower rooms. We detail the transitions in 5% increments in the white paper.

The 4-Layer aeroponic flower room with movable racking systems from the side with a tall human for scale. One can do a lot with 30′ ceilings.

Relative Humidity (RH) and the related VPD are the key metrics to accelerating growth throughout the stages. Not sizing dehumidifiers correctly is one of the most common mistakes our grow partners learn about as they move to full production. In the first phase of turning cuttings from healthy mothers into rooted clones, hitting your target VPD to motivate root growth is the number one success factor. This will require the addition of humidity into your clone room. It is also typical to require raise the humidity of your flower rooms when you transition clone/veg plants from the high humidity clone/veg room into an initially dry flower room, otherwise the plants may go into shock as a result of the dramatic change.

As flowering begins, if humidity remains high, and the VPD is below target, the plants will not be moving nutrients and transpiring moisture. We have seen lowering the humidity from 70% in a flower room down to 50%, results in a yield increase from 50 grams to 90 grams of dry trim bud per plant, so a smooth transition can both accelerate growth and have a big impact on your margins and profitability.

Plants in aeroponics can truly have explosive growth. This means that they will also transpire moisture at an accelerated rate. Fast automated growth in aeroponics means increased humidity output. Sizing these critical systems for humidification/dehumidification are a critical part of the design process.

Airflow

Fans combined with your cooling/heating/humidity/dehu systems need to mix the air in a room to break the boundary layer at the leaf surface for transpiration. As we covered, VPD is critical to growth success. A dry surface motivates the plants to transpire moisture. We recommend flow rates across the canopy in a 0.5-1.5 meter/second rate to align to your genetics and where you are in the flowering process.

A raw facility before it gets outfitted.

Airflow and flowering means rich beautiful aromas are generated. Every facility has to consider odor control. If you are in a populated area, you will have ordinances and neighbors to satisfy. The best way to do this is to minimize the amount of air that exits a facility. This is also the cheapest approach.

Sterile HEPA filters and scrubbing systems clean air of pathogens and odor but they also need to circulate and “condition” air to the correct temperature and humidity levels before it can be recirculated into a room. Oftentimes, this is a good place to also recapture humidity and reinject it into your pure water cleaning systems.

Key vendors to talk to about sizing air treatment systems are SURNA, Quest, Desert Aire and AGS. Each of these vendors have specialties and tend to be superior partners in different regions of the world. We would be happy to introduce you to excellent support resources for air management systems.

To download the complete guide and get to the beef quickly, please request the complete white paper Top Quality Cultivation Facilities here.

Click here to see Part 2 where we discuss water quality and management.

November 3, 2021

Controlled Environment Agriculture: An Interview with Sam Andras

By Aaron Green

1 Comment

Food-focused controlled environment agriculture (CEA) is a multidisciplinary production technique whereby plants and products are grown inside greenhouses, vertical farms and growth chambers where every aspect of the environment can be monitored and controlled. Using CEA, cultivators can produce high-value and traditional food crops with the goal of maximizing plant productivity in an efficient and environmentally friendly way.

As the industry’s first integrated building and cultivation systems design firm, urban-gro is ushering in a new era in the design of efficient indoor agriculture facilities, providing productivity and efficiency benefits to CEA operators when designing and operating facilities.

We interviewed Sam Andras, executive vice president of Professional Services at urban-gro, and principal of MJ12 Design Studio. Sam joined urban-gro after his company MJ12 Design Studio was acquired in July 2020. Prior to that, he was principal in charge of 2WR+ Partners, a 20-year Georgia-based architecture and interior design firm.

Aaron Green: Sam, tell me, how did you get started in the cannabis industry?

A facility that Andras designed in Massachusetts

Sam Andras: I started my architecture firm in 2001 in Georgia and later moved to Colorado in 2012. In 2013, I had the opportunity to do three cannabis facilities and really saw it as an emerging market that I thought would be really cool to dig into and pursue. Due to the marijuana stigma at the time, our company, 2WR, decided to create a cannabis-specific entity and developed MJ12 Design Studio. We built a website and it took off. Since 2013, I’ve personally designed about 130 cultivation facilities and vertically integrated facilities, from Hawaii all the way to New Zealand.

Green: When you say vertically integrated, what does that include?

Andras: The full building design of cultivation, product manufacturing, extraction, infusion and dispensaries.

Green: Is that something urban-gro currently does as well?

Andras: Now? Yes, with MJ12 under the facility design umbrella. After urban-gro acquired us in July, they were able to start offering full turnkey services. Everything from architecture, mechanical and plumbing engineering, electrical engineering, integrated cultivation, design of fertigation, benching, lighting, water treatment, environmental controls and other plant focused services– all of that is under our umbrella.

Green: Can you explain what controlled environment agriculture (CEA) is?

Andras: Absolutely. To me, CEA is crop agnostic, it can be anything from leafy greens to cannabis. Though we’re mainly focused on the cannabis industry and controlling that environment, we do also serve some leafy green companies. Environmental control includes things like temperature and humidity levels in the various stages of growth which is key to the economic success of organizations.

I’m a firm believer in legalization on the federal level down the road, which means that everything’s going to be under FDA for human consumption. If you look at the European models, when you look at the medicinal product development, it’s focused on consistency of the crop, from one crop to the next. And the way you achieve consistency is with CEA.

Green: From a resource perspective, can you describe how CEA differs from indoor to outdoor and greenhouse?

Andras: When you look at the market and the sale value of cannabis flower grown indoors versus outdoors or even greenhouse, greenhouse growing has huge variations by region. I believe greenhouses function better in more of a dry, arid climate. Indoor grows give you the ability to design and control your entire environment including temperatures, humidity levels, plant sizes, watering rates and other considerations. Growing indoors, in a controlled environment, gives you more flexibility to explore different alternatives in your cultivation.

A California cultivation facility he designed

Green: Final question: what in cannabis or in your personal life are you most interested in learning about?

Andras: That’s a great question. I’m a hands-on kind of guy. I would love to spend a couple of weeks working in extraction, as that’s the piece of the puzzle, as an architect, I know the least about. We’ve designed pretty much every type of cultivation from drip irrigation aeroponics to aquaponics, ebb & flow. You name it, we’ve done it, but the whole extraction process and the different equipment, and why companies choose ethanol, butane, hydrocarbon, CO₂ and how to design for those extraction processes is something that as an architect, I’d love to learn more about.

Green: Okay, Great. That concludes the interview. Thanks Sam!

Andras: Thanks, Aaron.

May 25, 2021

Growing the Seed of Sale: Integrating Security with Business Opportunity

By Ryan Schonfeld

No Comments

Anyone in the cannabis industry is well aware that theft of crops can economically devastate a grower. Security is critical, and thankfully, growers and dispensaries have many tools available to protect their investment. There is simply no excuse for not having a solid security posture to keep your business in compliance, from public-private partnerships to advanced security tools – in fact, it’s required in most jurisdictions.

In 2020, nationwide cannabis sales increased 67%, and support for legal marijuana reached an all-time high of 68%. New Frontier Data found that U.S. legal cannabis market is projected to double to $41.5 billion by 2025.

The industry’s advancement impacts numerous areas such as job and tax revenue creation and providing a wide variety of valuable opportunities. For cannabis facilities to keep up with the market expansion and experience success, they must face two significant challenges: achieving adequate security and efficient business operations. Though both can be seen as separate concerns, growers and producers must merge processes and solutions to tackle the issue as a whole.

Dispensaries are prime targets for burglary. Defending your storefront requires a comprehensive security plan

Along with rapid growth, dispensaries face traditional security risks, such as workplace violence and retail theft, while cybersecurity risks have also become more prevalent. These potential issues make it clear that the stakes are high, and as the potential impact on a business rises, the need for real-time, predictive response increases. Insider threats are another issue plaguing the industry when you look at the rate of theft, diversion and burglary that is attributable to employees.

The cannabis market is complex: it’s expanding rapidly, has to meet essential regulatory requirements and faces high-security risks. Therefore, security needs to be looked at holistically since it can be challenging to determine where a potential threat may originate.

With security top of mind, it is critical to move away from responsive behaviors and seek ways to manage security in a manner that gets ahead of threats, prevent them before they happen and respond to them in real-time. But does a grower or retailer have the time and expertise to manage all this while keeping an eye on how security affects the business?

Remote Security Operations

The ability to comply with government regulations and protect a valuable cannabis crop at all stages of its journey from seed to sale makes security systems a mission-critical asset for cannabis growers. Security operations centers create a safer and more productive environment and provide state-of-the-art tools to protect employees, retail locations and grow facilities. But some businesses in the cannabis market may not have the resources or space to have their centralized security operations, leading them to piece-meal security together or do the best with what they can afford at the time. Running these facilities can also be prohibitively expensive.

Security operations centers create a safer and more productive environment and provide state-of-the-art tools to protect employees, retail locations and grow facilities.

But new options take the process of security off the table. The business can focus on the growth of its core functions. Remote security operations services allow companies to take advantage of advanced security services typically only possible in larger enterprise environments. These services are offered on a subscription basis, delivered through the cloud, and are entirely customizable to detect risks unique to your business operations while saving each company significant expense.

Centralized security operations centers leverage intelligent tools, standard operating procedures and proven analytic methods to provide cannabis facilities with the information and guidance necessary to mitigate issues like retail or grow theft before they can have a significant impact.

The integrated, holistic response center staffed by experienced operators and security experts delivers a comprehensive security and regulatory compliance method. This approach is designed to provide complete data about what is happening across a cannabis business, from seed to sale, and how individual events can impact the company as a whole. As a result, stakeholders get the security intelligence they need, without the high overhead, personnel investments and complex daily management.

For those businesses in the cannabis market looking to supplement their security operations with other workforce but may not have the budget or infrastructure to do so, remote security operations services are something you should consider. With the experts handling all the heavy lifting, leaders can focus on growth. And, right now, in the cannabis industry, the sky is the limit in terms of opportunity.

March 16, 2021

The Ten Biggest Mistakes When Building a Cultivation Facility

By Michael Burnstein

3 Comments

As cannabis legalization becomes more prolific across the United States, entrepreneurs are entering the cultivation business in droves. With so many new companies entering the market and growing cannabis, there are a lot of common errors made when getting started. Here are ten of the biggest mistakes you can make when building a cannabis grow facility:

Failure to consult with experts in the cannabis business – poor planning in floorplan and layout could create deficient workflow causing extra time and costing profits. Bad gardening procedures may result in crop failure and noncompliance could mean a loss of license. Way too often, people will draft a design and begin construction without taking the time to talk to an expert first. Some important questions to ask yourself and your consultant are: What materials should be used in the building of the grow? Is my bed-to-flower ratio correct? How long will it take before I can see my first harvest?
Contractor selection – DO NOT build your own facility; leave it to the experts. Sure, you have experience building things and you have a friend who has worked in construction. Do not make this mistake – Our experience can save you from the mistake’s others have made. To stay lucrative in this competitive industry and to maximize your products’ quality and yields, have the facility built right the first time. Paying an experienced, qualified cannabis professional to build you a facility will produce better yields and will save you time, stress and money in getting you from start of construction to your first crop.
Not maximizing your square footage potential – With today’s fast changing environment, multi-tiered stationary racks, rolling benches and archive style rolling racks help maximize square footage. Without the proper garden layout, you will find yourself pounds short of your potential each harvest.
Inadequate power – Not planning or finding out if there is sufficient power available at the site for your current and future needs. This will stop you from building the overall square footage you want. When finding a building make sure you first know how much power you will need for the size grow you want. With proper engineering you will find out what load requirements will be so you can plan accordingly.
Material selection – The construction material that goes into a cultivation and extraction facility should consist of nonabsorbent anti-microbial finishes. The days of wood grow benches are long gone. Epoxy flooring, metal studs and other materials are mandatory for a quality-built, long-lasting facility.
Hand watering – Once your facility is up and running, many people feel they have spent enough money and they can save by hiring people to water by hand, rather than going with an automated system to handle the watering and nutrients. The problem with this is your employees are not on your plants timetable. What if an employee calls off and can’t come into water at the right time or they mix the wrong amount of nutrients from the formula you have selected? These are issues we see a lot. It is critical to perform precise, scheduled watering and nutrient delivery to increase your yields.
Failure to monitor and automate – Automating your grow is important for controlling the light and fertigation schedules as well as data collection and is crucial to maximizing yields. Being able to do this remotely gives you peace of mind in that you can monitor your grow room temperature and humidity at all times and be notified when something is not right.
Poor climate – This can cause stunted growth, smaller harvests and test failures. Our experience has taken us to facilities that have had mold and mildew issue due to poor climate. Proper air balancing, additional dehumidification along with a proper cleaning procedure can get a facility back in working order. Installing proper climate control systems could save millions of dollars.
Choosing the wrong site or building – Not knowing the history of the building you are choosing to rent or buy can create logistical and monetary nightmares. The wrong site can be a distribution and marketing disaster. In the wrong building, exponentially more money is spent to bring that building up to the standards needed for successful production and yields. For example, bringing in the ceiling and the cleaning of an existing facility can be a great expense. If you do not know what you are looking at when you purchase, you may be in for months of unaccounted expenses and inaccurate timelines. This can be detrimental for companies and individuals that are on restricted timelines and have to start producing successful and continuous yields from a space that has to be converted into a prime grow facility.
Failure to maintain your facility – A dirty site creates an invitation for pests, workplace injuries, unhealthy working environment and equipment failure. Keeping the facility and equipment properly maintained with routine service will ensure efficiency, longevity of equipment life span and reduce mold and bacteria risk. Clean facilities = clean plants and better flower.

December 22, 2020

Important Security Considerations When Designing Cannabis Facilities

By Heather Bender

No Comments

The cannabis industry is growing so quickly that even COVID-19 can’t slow it down. Before the pandemic, the industry amassed $13.6 billion in U.S. legal cannabis sales in 2019 – a figure that is expected to more than double to $30 billion in the next five years, according to New Frontier Data. In states where cannabis is legal for medical or recreational use, dispensaries have been deemed necessary, essential businesses – especially when it comes to calming stress and anxiety in our ever-changing times.

Cannabis legalization and newly budding dispensaries have expanded across the U.S., which may come with an unfortunate counterpart – a higher incidence of crime. Despite lower prices in states that have legalized cannabis, as compared to states where it is still illegal, theft has run rampant across grow operations, warehouses and, most often, dispensaries.

Heavy-duty security doors at the front of the dispensary block sight access and provide a visual deterrent.

Dispensaries can be targeted more frequently. Robbers may perceive them as an easy target, because they are businesses that have larger amounts of cash on hand. Many dispensaries only accept cash because payment processors and financial institutions aren’t willing to work with them. This is primarily because cannabis is still deemed an illegal substance under federal law, and the actions of financial institutions are governed by federal, not state, laws. Once the Secure And Fair Enforcement (SAFE) Banking Act is approved, cannabis businesses will be able to work more easily with banks, in turn reducing the amount of cash on site and erasing the dollar signs in opportunistic thieves’ eyes.

However, cash isn’t the only high thieves seek when they break into dispensaries. There’s also the product itself. Protecting it – and providing peace of mind to the facilities’ owners and occupants – is a concern for dispensaries, grow operations and warehouses. Robbers are motivated by the opportunity to make even more fast cash through reselling the product found onsite.

To eliminate such easy targets, security requirements for the cannabis industry are a necessity. They are also involved, complicated, and vary from state to state. A number of security specifications apply between state laws and local ordinances. Inventory must be properly surveilled and managed at all stages of transportation and storage. Any discrepancies in inventory can result in large fines and other penalties. To aid in understanding security compliances, the National Cannabis Industry Association (NCIA), a national trade association, recommends that start-ups obtain attorneys to guide businesses through their state’s laws and regulations.

This is why, especially for new business owners, it is critical to consider the best, most advanced security solutions – especially when it comes to doors and points of egress – that are easily integrated into buildings during the design phase. These solutions protect the products, properties, and people throughout the cannabis supply chain.

Understanding State Security Regulations
While there are no federally recognized security requirements for the cannabis industry, there are similar requirements across all states that have legalized cannabis, including:

Maintaining strict access control throughout the facility – this is especially important for grow operations and warehouses
Functional alarm systems
Documented standard operating procedures
Video surveillance systems – many states mandate very precise requirements, such as length of storage time and even video resolution specifications
Notifying appropriate regulatory agencies immediately or within a strict timeframe after a security incident or theft
Securing all records and record storage

While these are common, state-mandated security requirements, it is critically important to know and understand all rules, regulations, and laws concerning the industry within the business’s specific state. Making sure the business is compliant with all aspects of state laws for security and preventing violations, including the hefty financial penalties that can accompany them, is key.

States require cannabis facilities to implement sophisticated security features for several reasons. One of the most obvious is the fact that the industry supplies a high-value product and is a cash-intensive business. Integrating security features into the building can be a challenging task for architects and designers. To help tackle these challenges, manufacturers have introduced products to the cannabis industry, creating easier, more effective and aesthetically pleasing security solutions.

Integrated Designs For High Level Security
Security shouldn’t be a constraint when considering design aesthetics. Certain elements can be discretely tucked away, including cameras and security doors by way of specifying a concealed rolling door, conveniently disguised in the ceiling during operating hours. These doors can even close under alarm eliminating the need for manual intervention. Other security measures, such as bullet resistant glass, are hidden in plain sight.

Rolling doors like this one can be conveniently disguised in the ceiling during operating hours.

Untrustworthy employees, smash-and-grab thefts or meticulously planned heists mean secure building design is of the utmost importance. In order to have the most effective security, there needs to be design vision – a clear intent for incorporating advanced security into the facility, whether visible or not.

Suggested security measures include video surveillance around the outdoor perimeter of the property as well as inside the facility. Physical barriers, such as specialized entrance locking systems – including fingerprint-scanning biometric technology – and security doors that may also include intrusion detection and automatic closure systems are recommended. All systems may be paired with 24/7 visual monitoring by security personnel.

Many state regulations also require restricted access to specific areas within dispensaries, grow operations and warehouses, with employee names and activities logged for reference. These necessary measures aid in inventory monitoring and control, further reducing the likelihood of internal theft.

When specifying building security, it’s important for architects to consider what type of building they are designing. There are differences in providing security for dispensaries versus warehouses and grow operations. Dispensaries and storefronts are frequently out in the open and in locations that are well-known to consumers. Warehouses and grow operations are usually tucked out of the way, rarely publicized, and less noticeable.

Rolling Grilles And Doors Deter Dispensary Theft
With a high-value product and cash on hand, dispensaries in particular have unique security challenges. And because they are retail businesses, egress and fire codes must be strictly adhered to, in addition to special security regulations.

In light of this, security doors require special consideration. They are necessary to provide secure protection against theft but shouldn’t distract from the architectural vision of the building or interior design.

Rolling security grilles are the ideal solution to protect the counter inside the dispensary and may also be ideal for the front of the store. They fit in small headspaces where there is limited ceiling room and can be easily concealed when not in use.

Even heavy-duty rolling doors used to protect the glass storefront of the dispensary and prevent intruders from entering the building’s dock area can be hidden when not in use. If building code allows, architects may specify a rolling door that coils up into the door’s header, residing behind an exterior soffit. These robust security doors’ lift-resistant bottom bars also can be obscured from sight.

Heavy-duty security doors at the front of the dispensary block sight access and provide a visual deterrent. They give the building a secured look when in use, but heavy-duty rolling doors don’t need to be imposing to customers during the dispensary’s operating hours.

Robust Visible Protection For Grow Operations And Warehouses
Grow operations and warehouses usually opt for more visible security doors to deter criminal activity. They also have different design considerations because of building layout and production needs. For instance, larger grow operations house plants and supplies which require heavy equipment to move throughout the facilities.

Heavy duty rolling security doors can be made with up to 12-gauge steel with interlocking slats and tamper resistant fasteners – making them stronger than standard garage doors. They provide high-end security at loading docks and limit access to restricted areas inside.

Rolling doors can also be used to block employee access to off-limits areas common in grow operations and warehouses. Because they are heavily reliant on utilities and infrastructure, such as water mains and humidity and temperature controls, warehouses and grow operations are ideal applications for rolling doors. If unauthorized personnel with ill intentions access these utility areas, it could spell disaster with ruined crops and damaged or unsafe products – turning into substantial financial losses. From a design standpoint, these doors do not need to be concealed. In fact, their visibility signals restricted access areas and hints at the security measures taken to protect these facilities.

Enhanced Security Features
Whether designing a dispensary, a grow operation facility, or a warehouse, rolling doors may be paired with automatic protection features to enhance the building’s security and help workers feel safe. These automatic closing systems allow the security doors to be immediately activated by a building alarm or the push of a panic button in emergency situations. The doors also feature advanced locking systems – some of which are hidden in non-traditional locations – providing further tamper resistance.

Some rolling door manufacturers offer in-house architectural design groups to guide architects and designers in choosing the ideal security doors. These groups can address and solve any design dilemmas that arise during the project. Every rolling door is built to a specific opening, making each product unique to that area of the project. Because of this customization, manufacturers can meet virtually any specification.

Meeting Insurance Requirements
Selecting the correct rolling door along with other advanced security features aids in meeting insurance requirements. Each insurance company has individual minimum-security conditions in its policy. Many insurance companies will not provide theft insurance if cannabis businesses do not have adequate security or cannot demonstrate they have it.

Planning Leads To Integrated Protection
The technical and legal aspects of securing dispensaries, grow operations, and warehouses can be overwhelming and, at times, confusing. Legal counsel, state agencies, industry associations, and manufacturers encourage new cannabis businesses to use them as resources as they unravel the nuances of the industry’s security regulations.

By combining robust security features such as video surveillance, proper access controls, rolling doors or grilles and automatic closure systems, cannabis facilities can meet state and insurance requirements and deter theft. With thoughtful design consideration and planning, these security features also have the capabilities to seamlessly blend with interior and exterior design aesthetics.

August 11, 2020

3 Ways IP Security Cameras Can Help Cannabusinesses Comply with COVID-19 Health Requirements

By Jeremy White

No Comments

The cannabis industry, like many others, felt the effects of the stay-at-home orders issued in March in response to the COVID-19 healthcare crisis. While medical cannabis companies were considered “essential” in most states, many recreational dispensaries had to close their doors, or pivot to a curbside pickup operations model. According to the State of the Cannabis Industry 2020 report, following a two-week spike in mid-March, as consumers stockpiled product ahead of stay-at-home mandates, sales took a temporary downturn.

The industry rebounded in a big way, however. The report notes that, since April 20, cannabis sales have steadily increased, and are, in fact, up approximately 40% from 2019. But while medical and recreational dispensaries are now open to the public and thriving, it’s far from business as usual.

Like any other retail store, cannabusinesses must follow local- and state-issued health and safety mandates designed to prevent the spread of COVID-19. Complying with these new requirements can be difficult for business owners and management teams on a normal business day – never mind in today’s climate, where demand for cannabis products continues to soar.

Turning to Technology

With more health regulations to follow than ever before and stores experiencing a consistent increase in daily foot traffic, it’s no longer realistic to expect managers to manually monitor every employee and customer to make sure guidelines are met. For example, it’s difficult to manage social distancing within the store – but there are commonly lines outside of cannabusinesses, where social distancing and mask-wearing precautions also need to be followed. Wouldn’t you rather have managers spend their time on customer service and initiatives that will deliver business value, rather than spending time making sure people are following safety protocols?

Technology can help mitigate these new health compliance challenges – and you may even already have the solution deployed: Internet Protocol (IP) security cameras. Often implemented by businesses as a security tool, IP cameras are now also an effective way to ensure employees and customers are following health and safety protocols.

Most IP cameras are equipped with artificial intelligence (AI) that can analyze information in real-time and make split-second response decisions. In the context of health compliance, they can be trained over time to recognize when requirements are not being followed and immediately alert the appropriate managers. This means managers only need to address violations, rather than observing everyone all the time, and they can resolve compliance gaps as they’re happening. In other words, AI takes on the compliance burden for you. And, as an added bonus, many AI-enabled surveillance systems give managers the ability to pull up live video feeds from their smartphone, so they can conduct compliance checks remotely, at any time. This is especially helpful to managers covering multiple stores (suddenly, they can be in more than one place at a time!).

Here are three specific ways IP security cameras can help dispensaries and other cannabusinesses ensure compliance with COVID-19-prompted health guidelines:

Social distance monitoring

Six-feet social distancing rules are now the norm across the U.S., and IP security cameras are able to measure the space around employees and customers to detect when the six-foot rule is violated. For example, some systems place a ring around each person, and the ring’s color changes when people come within six feet of each other. This capability can be helpful when trying to do things such as supervise the line to get into your store, manage your checkout queue, or monitor the distance between customers browsing in store aisles.You can use IP security cameras to create a healthier and safer work environment

Occupancy management

In many states, organizations must follow orders that restrict occupancy to 50% capacity. Rather than having an employee at your front door tallying the number of people going into and out of your store, IP security cameras can do the counting for you. With this capability, you can control foot traffic and keep the number of shoppers within defined occupancy requirements – without having to allocate personnel to do the task manually.

Face mask detection

AI-enabled IP security cameras can also help businesses comply with mandatory face mask orders. The technology can be trained to detect employees and customers who aren’t wearing face masks or other required personal protective equipment, and then alert appropriate management personnel.

A Dual Purpose – Security and Compliance

IP security cameras now have a dual purpose. Beyond simply helping organizations protect their premises from crime, they now also empower them to ensure compliance with health and safety requirements. You can leverage the technology to remediate compliance issues in real-time and demonstrate to public officials that your business remains in compliance with all health mandates. Most importantly, you can use IP security cameras to create a healthier and safer work environment – and, in these uncertain times, this is a certainty you can count on.

April 29, 2020

HACCP for Cannabis: A Guide for Developing a Plan

By Radojka Barycki

1 Comment

Hazard Analysis and Critical Control Points (HACCP) is a systematic approach that evaluates hazards that may potentially be present in food products that can harm the consumer. The process used to manufacture the product is evaluated from raw material procurement, receiving and handling, to manufacturing, distribution and consumption of the finished product¹. The documented process is what is known as HACCP plan. Although HACCP was designed to evaluate hazards in foods, it can be used to assess or evaluate hazards that may potentially be present in cannabis consumable products (edibles and vaping) that can cause harm to the consumer.

HACCP plan development requires a systematic approach that covers 5 preliminary steps and 7 principles. A systematic approach means that each step must be followed as outlined. Skipping a step will result in a HACCP plan that most likely will be ineffective to control potential hazards in the product.

The 5 preliminary steps are:

Establish a HACCP team
Describe the product
Establish the intended use of the product
Develop a flow diagram
Verify the flow diagram

The 7 Principles are:

Conduct a hazard analysis
Identify the critical control points (CCPs)
Establish critical limits (CL)
Establish monitoring procedures
Establish corrective actions
Establish verification procedures
Establish records and record keeping procedures^1,2

It is important to mention that HACCP plans are supported by programs and procedures that establish the minimum operational and sanitary conditions to manufacture safe products. These programs and procedures are known as pre-requisite programs (PRP) or preventative controls^1,2.

A multidisciplinary team must be established in order to ensure that all inputs of the product manufacturing process are considered during the hazards analysis discussions. The description of the product and its intended use provides detail information on ingredients, primary packaging material, methods of distribution, chemical characteristics, labeling and if any consumer might be vulnerable to the consumption of the product. A verified flow diagram is an accurate representation of the different steps followed during the product manufacturing process and will be used to conduct a hazard analysis. An inaccurate flow diagram will set the stage for an inadequate HACCP plan. Therefore, it is important that the HACCP team members verify the flow diagram. Figure 1 is a flow diagram for a fictional infused apple juice manufacturing plan that I will be using as an example.

The hazard analysis is the backbone of the HACCP plan. There are two elements that must be considered when conducting the hazard analysis:

Identification of the hazard associated with the ingredient(s) and/or the product manufacturing steps. These hazards have been categorized as: Biological, chemical (including radiological) and physical. Biological, chemical and physical hazards should be considered for each ingredient, primary packaging and process step. Also, it is important that the team is specific as to what hazard they are referring to. I often find that biological hazards are identified as “pathogens” for example. The team has to be specific on which pathogen is of concern. For example, if you are processing apple juice, the pathogens of concern are pathogenic coli and Salmonella sp. However, if you are processing carrot juice, you need to add Clostridium botulinum as a biological hazard also. If the choice of method to eliminate the hazards is pasteurization for example, the processing temperature-time combinations will differ greatly when manufacturing the apple juice vs. the carrot juice as C. botulinum is an organism that can sporulate and, therefore, is harder to kill.
Characterization of the hazard. This implies determining the significance of the potential hazard based on the severity of the consequence if it is consumed and the likelihood of occurrence in the ingredient or process step. Only steps in the process that has significant hazards should be considered further.

In my professional experience, the hazard analysis is one of the most difficult steps to achieve because it requires the expertise of the multidisciplinary team and a lot of discussion to get to the conclusion of which hazard is significant. I find that a lot of teams get overwhelmed during this process because they consider that everything in the process may represent a hazard. So, when I am working with clients or providing training, I remind everyone that, in the bigger scheme of things, we can get stricken by a lighting in the middle of a thunderstorm. However, what will increase our chances would be whether we are close or not to a body of water for example. If I am swimming in the middle of a lake, I increase my chances to get stricken by the lighting. In comparison, if I am just sitting in my living room drinking a cup of coffee during the thunderstorm, the likelihood of being stricken by a lighting is a lot less. The same rationale should be applied when conducting the hazard analysis for manufactured products. You may have a hazard that will cause illness or death (high on the severity chart) but you also may have a program that mitigates the likelihood of introducing or having the hazard. The program will reduce the significance of the hazard to a level that may not need a critical control point to minimize or eliminate it.

Clear as mud, right? So, how would this look like on the infused apple juice example? Table 1 shows the hazard analysis for the ingredients. Tables 2 and 3 show the hazard analysis for the part of the process. In addition, I have identified the CCPs: Patulin testing and pasteurization. There is a tool called the CCP decision tree that is often used to determine the CCPs in the process.

Once we have the CCPs, we need to establish the critical limits to ensure that the hazard is controlled. These limits must be validated. In the case of Patulin, the FDA has done several studies and has established 50 ppm as the maximum limit. In the case of pasteurization, a validation study can be conducted in the juice by a 3^rd party laboratory. These studies typically are called thermal death studies (TDS) and provide the temperature and time combination to achieve the reduction of the pathogen(s) of concern to an acceptable level that they do not cause harm. In juice, the regulatory requirement is a 5-log reduction. So, let’s say that the TDS conducted in the infused apple juice determined that 165°F for 5 seconds is the critical limit for pasteurization. Note that the 5 seconds will be provided by the flow of the product through the holding tube of the pasteurizer. This is measured based on flow in gallons per minute.

Monitoring is essential to ensure that the critical limits are met. A monitoring plan that outlines what, how, when and who is responsible for the monitoring is required.

Ideally, the system should not fail. However, in a manufacturing environment, failures can happen. Therefore, it is important to pre-establish steps that will be taken to ensure that the product is not out of the control of the facility in the event of a deviation from the HACCP plan. These steps are called corrective actions and must be verified once they are completed. Corrective actions procedures must address the control of the product, investigation of the event, corrective actions taken so the deviation doesn’t reoccur and product disposition.

Table 4. HACCP Plan Summary

Verification activities ensure that the HACCP plan is being followed as written. Typically, verification is done by reviewing the records associated with the plan. These records include but are not limited to monitoring records, calibration records, corrective action records, and preventive maintenance records for equipment associated with the CCPs. Record review must be done within 7 working days of the record being produced.

Finally, establishing records and record keeping procedures is the last step on developing HACCP plans. Records must be kept in a dry and secure location.

Table 4 show the summary of the HACCP plan for the infused apple juice example.

For more information on how to develop a HACCP plan for your facility, read the resources below:

HACCP Principles and Application Guidelines – The National Advisory Committee on Microbiological Criteria for Foods (NACMCF)
ASTM D8250-19: Standard Practice for Applying a Hazard Analysis Critical Control Points (HACCP) Systems for Cannabis Consumable Products

April 8, 2020

Following Up: Questions From The Infused Products Virtual Conference Answered

By Ellice Ogle

No Comments

If you missed the Cannabis Industry Journal’s 3rd Annual Infused Products Virtual Conference last week, one of the speakers, Ellice Ogle, founder and CEO of Tandem Food presented on Food Safety Culture in the Cannabis Industry. An overview of the information in the presentation can be found here, Concentrate On a Food Safety Culture In Your Workplace. Below are answers to some of the post-presentation questions we received, but were unable to answer during the Q&A session. To get your additional questions answered or for a complimentary consultation for your company, specially provided to readers of Cannabis Industry Journal, contact Ellice Ogle at Ellice@tndmfood.com.

Question: What are some recommended digital programs for internal auditing?

Ellice Ogle: Before looking at the tools for conducting an internal audit, understand the goal of the internal audit. One key aspect of internal auditing is knowing which standard(s) to audit against. For example, regulatory audits for cGMP certification are different than optional third-party certifications such as any GFSI scheme (SQF, BRC, PrimusGFS, etc). While the standards ultimately have the same goal of food safety with varying focuses, it is important to have an experienced food safety specialist conduct the audit as realistically as possible. The experienced specialist will then be able to recommend an appropriate tool for internal auditing moving forward, whether it is software such as FoodLogiQ, SafetyChain, Safefood 360°, among many others, or simply providing a template of the audit checklist. Overall, the risk of foodborne illnesses can be minimal, but it takes persistence and commitment to achieve a successful food safety culture. Metrics can assist in assessing the commitment to food safety and, as a result of these efforts, you will minimize the risk of compromising the health and safety of your guests, employees, foods and business. If you want a specific example, I’d like to direct you to a case study in partnership with Heylo LLC in Washington state, posted on the Tandem Food website.

Q: What are examples of ways to share environmental monitoring results to enhance a good edible safety culture?

Ellice: In the Control of Listeria monocytogenes in Ready-To-Eat Foods: Guidance for Industry Draft Guidance (2017), the FDA states that “a well-designed environmental monitoring program promotes knowledge and awareness of the environmental conditions that could result in product contamination and is a more effective program than product testing alone.” In other words, environmental monitoring programs and results can identify environmental conditions within a facility that could cause potential contamination. Publishing these findings, for example in the form of a case study or sharing the details of the practice, can enhance the food safety culture in the specific niche industry. For example, to borrow from the meat industry, Tyson Foods, Inc developed and shared environmental monitoring programs that are used by their peers, promoting a unified food safety culture, rather than competitive, guarded secrecy.

Q: Are the food safety requirements the same for retail and manufacturing?

Ellice: The food safety requirements are not exactly the same for retailers and manufacturers. The difference is inherent that retailers are working with finished product while manufacturers are working with raw ingredients and the manufacturing process to develop the finished product. Let’s take a closer look at cannabis regulation in Washington state. Chapter 314-55-104(12) states “Processors creating marijuana extracts must develop standard operating procedures (SOPs), good manufacturing practices (GMPs), and a training plan prior to producing extracts for the marketplace.” Compare this to the requirements for retailers, 314-55-105(11) which states “A marijuana producer, processor or retailer licensed by the WSLCB must conduct the production, processing, storage, and sale of marijuana-infused products using sanitary practices.” While SOPs and GMPs are not explicitly mentioned for retailers as they are for manufacturers, sanitary practices could be documented as Sanitation Standard Operating Procedures (SSOPs). Proper storage practices can also be an overlapping food safety concern with respect to temperature control or pest management systems. Overall, food safety should remain a top priority in maintaining the integrity of the products throughout the supply chain.

Q: To your knowledge, has there been a food safety outbreak associated with a cannabis-based product?

Ellice: One possible cannabis-related death investigated in 2017 uncovered deadly pathogens in medical cannabis. However, to my knowledge, I have not seen a food safety outbreak associated with a cannabis-based product. There might be any number of reasons that this is so, for example, possibly because a food safety outbreak associated with a cannabis-based product might not have had a large impact to make headlines. Although, with the cannabis industry already misunderstood and a stigma so prevalent to even promote fake news, it is better to prevent an outbreak from ever occurring. One thing to note is that ultimately cannabis is just another ingredient in existing products, of course with special properties. So, the common food safety offenders are present: listeria, Salmonella, E. Coli, among others. On the plant, cannabis food product manufacturers must minimize the risk of mycotoxins produced by molds, pest contamination, and pesticide contamination. For products that contain cannabis infusions or extractions as an ingredient, there is the possibility of the growth of Botulism toxin. Many of these pathogens can be minimized by appropriate heat treatment or maintenance of refrigeration, testing, and by practicing preventive measures. Arguably, the largest potential for pathogenic contamination is due to improper employee handling. To refer to what we discussed earlier, employee training is key, as well as proper enforcement. Having a strong food safety culture ensures that people have the knowledge of food safety risks and the knowledge of preventing outbreaks.

Q: Do any of the panelists know of any efforts to develop a food safety-oriented standard for the cannabis industry?

Ellice: One example of a specific effort to develop a food safety-oriented standard for the cannabis industry includes TraceTrust A True Dose™ & hGMP™ certification. However, there are efforts for other standards that have food safety included. Take organic certification, there are several companies creating and auditing against their own standard such as Clean Green Certified, Oregon Sungrown Farm Certification, or Washington Sungrowers Industry Association. The California Department of Food and Agriculture (CDFA) is also preparing a cannabis program comparable to the USA National Organic Program.

Q: Can you assist with cGMP certification?

Ellice: Yes, Tandem Food LLC is positioned to consult on cGMP certification for manufacturing facilities in the cannabis industry. First, a gap assessment can be conducted to obtain useful actionable data for you, rather than be an intimidating experience. Working from the identified baseline, Tandem Food will work with you to create and implement all related documentation and programs, providing training as necessary. Overall, with the right commitment, cGMP certification can take 6-12 months.

March 31, 2020

Soapbox

Home Office HACCP During COVID-19

By Nathan Libbey

1 Comment

With much of the world shutting down and many of us forced to take refuge behind our own doors, we have some time to reflect on what actions led to this. There has been, in my opinion, a clear disconnect between our actions and health outcomes. We need to bridge this gap; We now have a moment to build that bridge. We can start by reassessing our endpoint measurement of health and disease and focusing on what leading measures will impact our lagging results. Think of it as HACCP-lite or home office HACCP. Small changes in the way we think and behave can lead to significant change.

Lagging measures – Lagging measures make great headlines and typically measure an outcome. These are easily quantifiable and therefore receive a good deal of the focus.

Leading measures – Leading measures are inputs that happen during the process and in advance of an outcome. Leading measures are often difficult to quantify.

This week, Nathan started a “Germ Jar” activity with his kids to track washing.

We are currently focused on the lagging measures for a communicable disease, COVID-19. Illness and death numbers stemming from the pandemic continue to rise, as is expected with more available testing. It is easy for us to dwell on these numbers as they climb and dominate the news. A study in Australia last decade indicated that just over 1% of those experiencing flu like symptoms sought treatment and eventually got tested. I’m not going to use the tip of the iceberg cliché, but there it is. Focusing on the rapidly rising rates of COVID may be easy to do, but it won’t help our future selves.

What we should be doing during this time, however, is looking at our own leading behaviors and how changing them can help prevent this situation from reoccurring.

Here are some inputs we can rethink:

Hand washing – The average American uses the restroom 6-7 times per day. This week I started a “Germ Jar” activity with my kids (spring break week!) to track washing. If we wash our hands every time we use the restroom and every time we eat, that’s roughly 10X per day. Our leading indicator of household health, then, is 10 hand washes per day. This principle can, and should be applied to workplaces, including schools, airports and hospitals. What if we had mandatory handwashing prior to airport security and boarding? My estimation is that data would indicate a sharp decline in illness and transmission rates.
Disinfecting/Sanitizing – Similar to hand washing, cleaning surfaces serves as a vital indicator of future health. Examples, such as this District in Freeport, Il, indicate that increasing frequency of disinfecting can lead to a dramatic decrease in numbers sick. In my new office setting, we have set a goal via the Germ Jar of 3 times per day wiping down high touch surfaces. As we reenter close-proximity society, we need to have a better understanding of what high touch surfaces are, both for those who are tasked to clean them, as well as those that are doing the touching. Reduction of touches coupled with above washing behaviors post-touch can help prevent disease transmission.
Nathan’s daughter adding to the Germ Jar
Monitoring – Lastly, we need to do a better job at monitoring ourselves and our environments. In my new office, we have enacted a temperature check every morning and night. If we practiced symptom reporting (coughing, sneezing, chills) and monitored temperature in other settings, such as offices and schools, could we start to see pockets of infection and trends? Taking it a step farther, while we invest a tremendous amount of time and money into protecting our food supply from foodborne illness, we rarely discuss preventive monitoring for other diseases, such as influenza and now COVID-19. Technologies are rapidly coming available that will allow us to perform quick diagnostics of both individuals and environments. If we were to monitor the air and surfaces of a school nurse’s office, would we find data that could prevent transmission of disease? Can we transfer HACCP-lite to additional (all) settings?

Over the next weeks and months, we are going to be inundated by the spike in COVID illnesses and deaths. During this time, it is on each of us to realize how our past behaviors led to the state we are in. When we return, viruses will not be absent from the world, our hospitals, schools, offices or our bodies. We can, starting now, begin to measure and change our leading behaviors and begin to shape a healthier future.