Tag Archives: packaging

February 13, 2018

Hazard Analysis and Critical Control Points (HACCP) for the Cannabis Industry: Part 1

By Kathy Knutson, Ph.D.

Hazard Analysis and Critical Control Points (HACCP) Defined

Farm-to-fork is a concept to describe the control of food safety starting in the fields of a farm and ending with deliciousness in my mouth. The more that is optimized at every step, the more food safety and quality are realized. Farm-to-fork is not a concept reserved for foodies or “eat local” food campaigns and applies to all scales of food manufacture. HACCP is like putting the last piece of a huge puzzle in the middle and seeing the whole picture develop. HACCP is a program to control food safety at the step of food processing. In states where cannabis is legal, the state department of public health or state department of agriculture may require food manufacturers to have a HACCP plan. The HACCP plan is a written document identifying food safety hazards and how those hazards are controlled by the manufacturer. While there are many resources available for writing a HACCP plan, like solving that puzzle, it is a do-it-yourself project. You can’t use someone else’s “puzzle,” and you can’t put the box on a shelf and say you have a “puzzle.”

HACCP is pronounced “ha” as in “hat” plus “sip.”

(Say it aloud.)

3-2-1 We have liftoff.

The history of HACCP starts not with Adam eating in the garden of Eden but with the development of manned missions to the moon, the race to space in the 1950s. Sorry to be gross, but imagine an astronaut with vomiting and diarrhea as a result of foodborne illness. In the 1950s, the food industry relied on finished product testing to determine safety. Testing is destructive of product, and there is no amount of finished product testing that will determine food is safe enough for astronauts. Instead, the food industry built safety into the process. Temperature was monitored and recorded. Acidity measured by pH is an easy test. Rather than waiting to test the finished product in its sealed package, the food industry writes specifications for ingredients, ensures equipment is clean and sanitized, and monitors processing and packaging. HACCP was born first for astronauts and now for everyone.

HACCP is not the only food safety program.

If you are just learning about HACCP, it is a great place to start! There is a big world of food safety programs. HACCP is required by the United States Department of Agriculture for meat processors. The Food and Drug Administration (FDA) requires HACCP for seafood processing and 100% juice manufacture. For all foods beyond meat, seafood and juice, FDA has the Food Safety Modernization Act (FSMA) to enforce food safety. FSMA was signed in 2011 and became enforceable for companies with more than 500 employees in September of 2016; all food companies are under enforcement in September 2018. FSMA requires all food companies with an annual revenue greater than $1 million to follow a written food safety plan. Both FDA inspectors and industry professionals are working to meet the requirements of FSMA. There are also national and international guidelines for food safety with elements of HACCP which do not carry the letter of law.

The first step in HACCP is a hazard analysis.

Traditionally HACCP has focused on processing and packaging. Your organization may call that manufacturing or operations. In a large facility there is metering of ingredients by weight or volume and mixing. A recipe or batch sheet is followed. Most, but not all, products have a kill step where high heat is applied through roasting, baking, frying or canning. The food is sealed in packaging, labeled, boxed and heads out for distribution. For your hazard analysis, you identify the potential hazards that could cause injury or illness, if not controlled during processing. Think about all the potential hazards:

Biological: What pathogens are you killing in the kill step? What pathogens could get in to the product before packaging is sealed?

Chemical: Pesticides, industrial chemicals, mycotoxins and allergens are concerns.

Physical: Evaluate the potential for choking hazards and glass, wood, hard plastic and metal.

The hazards analysis drives everything you do for food safety.

I cannot emphasize too much the importance of the hazard analysis. Every food safety decision is grounded in the hazard analysis. Procedures will be developed and capital will be purchased based on the hazard analysis and control of food safety in your product. There is no one form for the completion of a hazard analysis.

HACCP risk matrix — A risk severity matrix. Many HACCP training programs have these.

So where do you start? Create a flow diagram naming all the steps in processing and packaging. If your flow diagram starts with Receiving of ingredients, then the next step is Storage of ingredients; include packaging with Receiving and Storage. From Storage, ingredients and packaging are gathered for a batch. Draw out the processing steps in order and through to Packaging. After Packaging, there is finished product Storage and Distribution. Remember HACCP focuses on the processing and packaging steps. It is not necessary to detail each step on the flow diagram, just name the step, e.g. Mixing, Filling, Baking, etc. Other supporting documents have the details of each step.

For every step on the flow diagram, identify hazards.

Transfer the name of the step to the hazard analysis form of your choice. Focus on one step at a time. Identify biological, chemical and physical hazards, if any, at that step. The next part is tricky. For each hazard identified, determine the probability of the hazard occurring and severity of illness or injury. Some hazards are easy like allergens. If you have an ingredient that contains an allergen, the probability is high. Because people can die from ingestion of allergens when allergic, the severity is high. Allergens are a hazard you must control. What about pesticides? What is the probability and severity? I can hear you say that you are going to control pesticides through your purchasing agreements. Great! Pesticides are still a hazard to identify in your hazard analysis. What you do about the hazard is up to you.

January 29, 2018

NACB Releases Packaging and Labeling Standards for Public Review

By Aaron G. Biros

No Comments

Last week, the National Association of Cannabis Businesses (NACB) announced the publication of their Packaging and Labeling National Standard, initiating a comment period for public review. The NACB, which launched in June of 2017, is the first-ever self-regulatory organization (SRO) for cannabis businesses in the United States.

According to the press release, the Packaging and Labeling National Standard, the first standard for them to publish, is designed to help protect consumers and show regulators and financial institutions that members of NACB operate ethically and responsibly.

According to Andrew Kline, president of NACB, the standard is based on regulators’ priorities, among other stakeholder inputs. “The NACB believes that self-regulation is the most effective course of action for our members to control their own destiny in the face of regulators’ growing need to intervene,” says Kline. “The creation and adoption of national, voluntary standards that are aligned with regulators’ priorities takes input from government, NACB members, and subject matter experts into careful consideration. Through this process, the SRO identified product packaging and labeling as our first priority because it impacts so many issues related to health and safety.”

Here are some of the major areas the standard addresses, from the press release:

Child-resistant packaging guidelines for all cannabis products
Consistent labeling that identifies the cannabis product’s origin, cultivator and processor
Inclusion of warning statements regarding health risks associated with cannabis consumption, such as advising consumers to not drive or operate heavy machinery while using the product, and that the intoxicating effects of the product may be delayed after consumption
Avoiding packaging and labeling that appeal to minors
Requirements and methods for listing all ingredients present in the product
Inclusion of major food allergen warnings and information on cannabis edibles based upon U.S. Food & Drug Administration guidelines
Guidelines on how to address health and medical claims for cannabis products

The public review and comment period lasts until February 21^st. During that time, every comment submitted will be reviewed and could impact the final language of the standard. Prior to adopting the new standard, they write a final draft after the comment period and bring it to members for a final vote.

Once the final standard is in place, the NACB enforces the standard with their members. If a member doesn’t comply, they can be removed from the organization or penalized.

Towards the end of the press release, they hint at news coming in 2018 for their members. “To help aid members in complying with the requirements of state governments and the NACB’s National Standards, the NACB expects to launch a technology solution exclusively for members in 2018,” reads the press release. “The technology platform is also expected to help members meet the rigorous due diligence required by financial institutions and business partners, by creating an auditable ledger of compliance and financial records.”

January 10, 2018

Microbiology 101 Part Two

By Kathy Knutson, Ph.D.

No Comments

Microbiology 101 Part One introduced the reader to the science of microbiology and sources of microbes. In Part Two, we discuss the control of microorganisms in your products.

Part 2

The cannabis industry is probably more informed about patients and consumers of their products than the general food industry. In addition to routine illness and stress in the population, cannabis consumers are fighting cancer, HIV/AIDS and other immune disorders. Consumers who are already ill are immunocompromised. Transplant recipients purposely have their immune system suppressed in the process of a successful transplant. These consumers have pre-existing conditions where the immune system is weakened. If the immunocompromised consumer is exposed to viral or bacterial pathogens through cannabis products, the consumer is more likely to suffer from a viral infection or foodborne illness as a secondary illness to the primary illness. In the case of consumers with weakened immune systems, it could literally kill them.Bacteria, yeast, and mold are present in all environments.

The cannabis industry shoulders great responsibility in both the medical and adult use markets. In addition to avoiding chemical hazards and determining the potency of the product, the cannabis industry must manufacture products safe for consumption. There are three ways to control pathogens and ensure a safe product: prevent them from entering, kill them and control their growth.

Prevent microorganisms from getting in

Think about everything that is outdoors that will physically come in a door to your facility. Control the quality of ingredients, packaging, equipment lubricants, cleaning agents and sanitizers. Monitor employee hygiene. Next, you control everything within your walls: employees, materials, supplies, equipment and the environment. You control receiving, employee entrance, storage, manufacturing, packaging and distribution. At every step in the process, your job is to prevent the transfer of pathogens into the product from these sources.

Kill microorganisms

Colorized low-temperature electron micrograph of a cluster of E. coli bacteria.
Image courtesy of USDA ARS & Eric Erbe

The combination of raw materials to manufacture your product is likely to include naturally occurring pathogens. Traditional heat methods like roasting and baking will kill most pathogens. Remember, sterility is not the goal. The concern is that a manufacturer uses heat to achieve organoleptic qualities like color and texture, but the combination of time and temperature may not achieve safety. It is only with a validated process that safety is confirmed. If we model safety after what is required of food manufacturers by the Food and Drug Administration, validation of processes that control pathogens is required. In addition to traditional heat methods, non-thermal methods for control of pathogens includes irradiation and high pressure processing and are appropriate for highly priced goods, e.g. juice. Killing is achieved in the manufacturing environment and on processing equipment surfaces after cleaning and by sanitizing.

If you have done everything reasonable to stop microorganisms from getting in the product and you have a validated step to kill pathogens, you may still have spoilage microorganisms in the product. It is important that all pathogens have been eliminated. Examples of pathogens include Salmonella, pathogenic Escherichia coli, also called Shiga toxin-producing E. coli (STEC) and Listeria monocytogenes. These three common pathogens are easily destroyed by proper heat methods. Despite steps taken to kill pathogens, it is theoretically possible a pathogen is reintroduced after the kill step and before packaging is sealed at very low numbers in the product. Doctors do not know how many cells are required for a consumer to get ill, and the immunocompromised consumer is more susceptible to illness. Lab methods for the three pathogens mentioned are designed to detect very low cell numbers. Packaging and control of growth factors will stop pathogens from growing in the product, if present.

Control the growth of microorganisms

These growth factors will control the growth of pathogens, and you can use the factors to control spoilage microbes as well. To grow, microbes need the same things we do: a comfortable temperature, water, nutrients (food), oxygen, and a comfortable level of acid. In the lab, we want to find the pathogen, so we optimize these factors for growth. When you control growth in your product, one hurdle may be enough to stop growth; sometimes multiple hurdles are needed in combination. Bacteria, yeast, and mold are present in all environments. They are at the bottom of the ocean under pressure. They are in hot springs at the temperature of boiling water. The diversity is immense. Luckily, we can focus on the growth factors for human pathogens, like Salmonella, pathogenic E. coli, and Listeria monocytogenes.

The petri dishes show sterilization effects of negative air ionization on a chamber aerosolized with Salmonella enteritidis. The left sample is untreated; the right, treated. Photo courtesy of USDA ARS & Ken Hammond

Temperature. Human pathogens prefer to grow at the temperature of the human body. In manufacture, keep the time a product is in the range of 40^oF to 140^oF as short as possible. You control pathogens when your product is at very hot or very cold temperatures. Once the product cools after a kill step in manufacturing, it is critical to not reintroduce a pathogen from the environment or personnel. Clean equipment and packaging play key roles in preventing re-contamination of the product.

Water. At high temperatures as in baking or roasting, there is killing, but there is also the removal of water. In the drying process that is not at high temperature, water is removed to stop the growth of mold. This one hurdle is all that is needed. Even before mold is controlled, bacterial and yeast growth will stop. Many cannabis candies are safe, because water is not available for pathogen growth. Packaging is key to keep moisture out of the product.

Nutrients. In general, nutrients are going to be available for pathogen growth and cannot be controlled. In most products nutrients cannot be removed, however, recipes can be adjusted. Recipes for processed food add preservatives to control growth. In cannabis as in many plants, there may be natural compounds which act as preservatives.

Oxygen. With the great diversity of bacteria, there are bacteria that require the same oxygen we breathe, and mold only grows in oxygen. There are bacteria that only grow in the absence of oxygen, e.g. the bacteria responsible for botulism. And then there are the bacteria and yeast in between, growing with or without oxygen. Unfortunately, most human pathogens will grow with or without oxygen, but slowly without oxygen. The latter describes the growth of Salmonella, E. coli, and Listeria. While a package seals out air, the growth is very slow. Once a package is opened and the product is exposed to air, growth accelerates.

Acid. Fermented or acidified products have a higher level of acid than non-acid products; the acid acts as a natural preservative. The more acid, the more growth is inhibited. Generally, acid is a hurdle to growth, however and because of diversity, some bacteria prefer acid, like probiotics which are non-pathogenic. Some pathogens, like E. coli, have been found to grow in low acid foods, e.g. juice, even though the preference is for non-acidic environments.

Each facility is unique to its materials, people, equipment and product. A safe product is made by following Good Agricultural Practices for the cannabis, by following Good Manufacturing Practices and by suppressing pathogens by preventing them coming in, killing them and controlling their growth factors. Future articles will cover Hazard Analysis and Critical Control Points (HACCP) and food safety in more detail.

December 13, 2017

Cannabis-Infused Wine Comes to California in 2018

By Aaron G. Biros

No Comments

Rebel Coast Winery announced this week the launch of the world’s first cannabis-infused, alcohol-removed wine. The company’s THC-infused Sauvignon Blanc, available only in California, will hit dispensary shelves in 2018.

According to the press release, they plan to be fully compliant with California’s new regulations for the cannabis industry, hence the lack of alcohol in the product, which is a requirement under the state’s new manufacturing rules. “Rebel Coast’s grapes are grown in Sonoma County – California’s wine capital – and fermented through a traditional winemaking process,” reads the press release. “Rebel Coast removes the wine’s alcohol and infuses each bottle of its premium Sauvignon Blanc with 16 milligrams of organic tetrahydrocannabinol (THC)…” In addition to the THC infusion, they also add terpenes to the final product, giving it the cannabis fragrance.

According to Alex Howe, co-founder of Rebel Coast, the winery is in Sonoma, but they’re waiting to see where they’ll be licensed to extract, infuse and package the final product. “The winery is in Sonoma, we make the wine, and remove the alcohol there,” says Howe. “We’re currently waiting for licensing transfer approval in two locations, one in San Bernardino, the other West Sacramento, and exploring an option to infuse in San Benito County with a currently licensed location.” They plan to co-package under a third party license and seek a Type N license for extraction with non-volatile solvents.

Rebel Coast has partnered with a fully licensed outdoor grower, and is looking for an extractor that will be able to handle their volume needs. With regard to their infusion and extraction process, Howe says they combine clear distillate with a surfactant to make the THC liquid soluble and fast acting.

He expects the full infusion and packaging operations to be up and running by early 2018. “The San Bernardino and West Sacramento locations were previously licensed for infusion, packaging, and manufacturing, but with purchase of the building, the change in ownership has caused us to wait for the license to change ownerships too.”

“We’ve continued our disruptive approach to craft the world’s first cannabis-infused, alcohol-free wine,” says Chip Forsythe, co-founder and chief executive officer of Rebel Coast. “We wanted to excite the rebellious spirit in Americans through innovation, so we took two world-class California products – marijuana and wine – and created a proprietary process that resulted in a delicious, crisp and elegantly crafted Sauvignon Blanc that’s teed up to be a game changer for the wine and cannabis industries.”

They plan to start shipping product in early 2018, as well as distribute to over 500 dispensaries throughout the state, via Green Reef Distributing, a licensed cannabis distributor that represents wine and spirit accounts for other CBD products. Later in 2018, Rebel Coast plans on rolling out cannabis-infused Rosé and champagne, as well as CBD-infused wines. In the press release the company teases their products will be available in other legal states in the coming months.

December 6, 2017

California Manufacturing Regulations: What You Need To Know

By Aaron G. Biros

No Comments

In late November, California released their proposed emergency regulations for the cannabis industry, ahead of the full 2018 medical and adult use legalization for the state. We highlighted some of the key takeaways from the California Bureau of Cannabis Control’s regulations for the entire industry earlier. Now, we are going to take a look at the California Department of Public Health (CDPH) cannabis manufacturing regulations.

According to the summary published by the CDPH, business can have an A-type license (for products sold on the adult use market) and an M-type license (products sold on the medical market). The four license types in extraction are as follows:

Type 7: Extraction using volatile solvents (butane, hexane, pentane)
Type 6: Extraction using a non-volatile solvent or mechanical method
(food-grade butter, oil, water, ethanol, or carbon dioxide)
Type N: Infusions (using pre-extracted oils to create edibles, beverages,
capsules, vape cartridges, tinctures or topicals)
Type P: Packaging and labeling only

As we discussed in out initial breakdown of the overall rules, California’s dual licensing system means applicants must get local approval before getting a state license to operate.

The rules dictate a close-loop system certified by a California-licensed engineer when using carbon dioxide or a volatile solvent in extraction. They require 99% purity for hydrocarbon solvents. Local fire code officials must certify all extraction facilities.

In the realm of edibles, much like the rule that Colorado recently implemented, infused products cannot be shaped like a human, animal, insect, or fruit. No more than 10mg of THC per serving and 100mg of THC per package is allowed in infused products, with the exception of tinctures, capsules or topicals that are limited to 1,000 mg of THC for the adult use market and 2,000 mg in the medical market. This is a rule very similar to what we have seen Washington, Oregon and Colorado implement.

On a somewhat interesting note, no cannabis infused products can contain nicotine, caffeine or alcohol. California already has brewers and winemakers using cannabis in beer and wine, so it will be interesting to see how this rule might change, if at all.

The rules for packaging and labeling are indicative of a major push for product safety, disclosure and differentiating cannabis products from other foods. Packaging must be opaque, cannot resemble other foods packaged, not attractive to children, tamper-evident, re-sealable if it has multiple servings and child-resistant. The label has to include nutrition facts, a full ingredient list and the universal symbol, demonstrating that it contains cannabis in it. “Statute requires that labels not be attractive to individuals under age 21 and include mandated warning statements and the amount of THC content,” reads the summary. Also, manufacturers cannot call their product a candy.

Foods that require refrigeration and any potentially hazardous food, like meat and seafood, cannot be used in cannabis product manufacturing. They do allow juice and dried meat and perishable ingredients like milk and eggs as long as the final product is up to standards. This will seemingly allow for baked goods to be sold, as long as they are packaged prior to distribution.

Perhaps the most interesting of the proposed rules are requiring written standard operating procedures (SOPs) and following good manufacturing practices (GMPs). Per the new rules, the state will require manufacturers to have written SOPs for waste disposal, inventory and quality control, transportation and security.

Donavan Bennett, co-founder and CEO of the Cannabis Quality Group

According to Donavan Bennett, co-founder and chief executive officer of the Cannabis Quality Group, California is taking a page from the manufacturing and life science industry by requiring SOPs. “The purpose of an SOP is straightforward: to ensure that essential job tasks are performed correctly, consistently, and in conformance with internally approved procedures,” says Bennett. “Without having robust SOPs, how can department managers ensure their employees are trained effectively? Or, how will these department managers know their harvest is consistently being grown? No matter the employee or location.” California requiring written SOPs can potentially help a large number of cannabis businesses improve their operations. “SOPs set the tempo and standard for your organization,” says Bennett. “Without effective training and continuous improvement of SOPs, operators are losing efficiency and their likelihood of having a recall is greater.”

Bennett also says GMPs, now required by the state, can help companies keep track of their sanitation and cleanliness overall. “GMPs address a wide range of production activities, including raw material, sanitation and cleanliness of the premises, and facility design,” says Bennett. “Auditing internal and supplier GMPs should be conducted to ensure any deficiencies are identified and addressed. The company is responsible for the whole process and products, even for the used and unused products which are produced by others.” Bennett recommends auditing your suppliers at least twice annually, checking their GMPs and quality of raw materials, such as cannabis flower or trim prior to extraction.

“These regulations are only the beginning,” says Bennett. “As the consumer becomes more educated on quality cannabis and as more states come online who derives a significant amount of their revenue from the manufacturing and/or life science industries (e.g. New Jersey), regulations like these will become the norm.” Bennett’s Cannabis Quality Group is a provider of cloud quality management software for the cannabis industry.

“Think about it this way: Anything you eat today or any medicine you should take today, is following set and stringent SOPs and GMPs to ensure you are safe and consuming the highest quality product. Why should the cannabis industry be any different?”

September 21, 2017

New Colorado Edibles Regulations Effective October 1st

By Aaron G. Biros

1 Comment

Back in April of 2016, the Colorado Legislature passed HB 1436 in an effort to make infused products less appealing to children. On October 1^st, 2017, the new law goes into effect, which will prohibit the sale of edibles in the shape of a human, animal or fruit.

Colorado has a history of regulating the market like this, with laws designed to limit the dosing, consistency and appeal of edibles to children. In 2015, regulators placed a 100-milligram cap on THC in infused products, separated into 10-milligram servings. In 2016, regulators began requiring the THC stamp on edibles, a symbol with a clear representation of what the product contains.

Some in the industry are welcoming of these new laws, while others think it might be overregulation. Regardless, manufacturers that have previously produced things like fruit candies or gummy bears now need to update their processes to use non-descript shapes for their products in order to stay compliant.

Bob Eschino, founder and president of Incredibles, an infused product manufacturer in Colorado, says these rules are not very effective at preventing kids from obtaining edibles, but it could help. “I believe consumer protection comes from CRP [child-resistant packaging], proper labeling, education and safe storage,” says Eschino. “CDPHE said themselves that stamping or shaping the products is the least effective way to prevent accidental ingestion. It’s a step that will add to consumer protection in a small way, but every little bit helps for now.” There are a number of more effective measures that regulators in Colorado take to prevent edibles from getting in the hands of children, such as child-resistant packaging, prohibiting advertising of cartoon characters, requiring opaque packaging and warning messages on labels.

Products like infused gummy bears will no longer be permitted for retail; Photo: Tamara S., Flickr

According to Peggy Moore, partner of Love’s Oven, an infused product manufacturer, and board president of the Cannabis Business Alliance, the major change companies need to make to stay compliant is ordering new molds. “Depending on the quantity ordered, molds can cost $10,000 or more to fabricate and produce.,” says Moore. “If a company was not using molds previously there is also training that may be required to orient production staff on technique for making molded confections.” She says there are still plenty of options for manufacturers to use like botanical shapes (a cannabis leaf, for example), circles, squares, rectangles and other shapes.

Her company, Love’s Oven, makes caramels, baked goods, crackers and other non-descript shapes already. “At this point I am not aware of any manufacturers who are not already compliant with this rule in advance,” says Moore. “The most common solution is to move to a square, circle or other shape utilizing molds. “ Moore believes it is a producer’s duty to make products that are not enticing to children. “Regardless of the industry (alcohol, cannabis, pharma) I think we should exercise great caution to not produce products that are targeting children,” says Moore. “While I would love to see manufacturers self-regulate in this regard, clearly some guardrail regulations are needed at this point.”

In addition to the rule on using non-descript shapes, HB 1436 prohibits the use of additives in retail cannabis products that are designed to make it addictive, more appealing to children or misleading consumers. The rule does, however, exclude common baking and cooking ingredients. There is also a stipulation that permits local fire departments to perform annual fire inspections at cannabis cultivation facilities.

November 16, 2016

Soapbox

Labeling Cannabis Products is a Booming Market

By Marsha Frydrychowski

1 Comment

Legal marijuana sales are expected to hit $6.7 billion in 2016, with the market expected to climb to $21.8 billion in sales by 2020. As legal cannabis sales rise, cannabis labels are quickly becoming one of the fastest growing markets for label manufacturers.

An Industry Gaining Legitimacy

Since California first legalized medical cannabis in 1996, the cannabis industry has grown considerably. Voters in four states legalized recreational cannabis last week on Election Day, including California, which is currently the world’s 6^th largest economy. Voters in another four states legalized medical cannabis as well, bringing the total to 28 states with some form of legalization measure.

The market is moving ahead and will not be limited to small businesses and dispensaries either. Already, more than 50 publicly traded companies have blitzed the market, including pharmaceuticals, medical growers and even major tech companies.

An example of a cannabis flower label in Oregon with all of the required information.

What’s more, public support for full cannabis legalization is at an all-time high 61 percent, according to a recent survey from the AP-NORC Center for Public Affairs Research. The market is here to stay.

Cannabis flower labels

Legal cannabis has primarily consisted of dispensaries selling cannabis flower or leaves (ready-to-smoke marijuana) in pouches or childproof containers. Regulations have essentially required two cannabis labels for the pouches: a branded label on the front and a regulatory label on the back. Many dispensaries also use pre-printed pouches.

Similar to the way alcohol labels must contain information for alcohol content, the informational labels that sit on the backs of pouches are legally required to provide certain accurate information, including:

The universal symbol required on all cannabis products in Colorado

THC %
CBD %
Net weight in grams
Lab name and test number confirmation
Batch number
Date tested
Strain name
Warning Label

And cannabis flower labels are just the beginning. Many smoke-free product categories are emerging with similar labeling requirements. These often allow for increased branding opportunities that will afford better profit margins for label suppliers. Some of the many products in this young category include:

Edibles — such as dark chocolates, baked goods, snack crackers and teas infused with cannabis.
Topicals — such as pain-relieving lotions and creams.
Tinctures — cannabis-infused oils that are applied in drops to the tongue.

Bottom line: For label and packaging suppliers, cannabis represents one of the fastest growing market opportunities today and the opportunities extend way beyond labeling for the flower itself.

Managing Compliance

As more and more states move toward legalization and regulation, uneven laws in different states are increasingly governing the market. Businesses must respond to ever-changing requirements, including labeling standards. While many dispensaries have gotten away with minimalist labels, states are increasingly demanding dispensaries meet more stringent legal requirements. For example, Oregon passed new labeling requirements this year and products that failed to meet them by October 1, 2016 were not allowed on store shelves.

Label suppliers entering the market must keep abreast of the changing regulations and be able to help brands navigate them. They need to work to understand the intricacies of this new market, rather than simply looking to redirect the capabilities they already possess. See the original post here.

October 5, 2016

Cannabusiness Sustainability

Packaging: Four Sustainability Principles

By Brett Giddings, Olivia L. Dubreuil, Esq.

No Comments

As with any product, packaging has a vast range of sustainability considerations that should be accounted for in its design, development and use. Often the most visible component of any product, and certainly so for most forms of cannabis products, packaging is a key sustainability issue for the entire cannabis supply chain.

What is sustainable cannabis packaging and what does it look like? This can be a loaded question, but one we can revisit after considering the basic functions of packaging.

Cannabis packaging, and packaging generally, is designed to perform three basic functions: protection, preservation and promotion. If it does not adequately address these three areas then the chance of product failure, loss of consumer trust and increased waste is likely.

Let’s take a high level look at each of these:

Protection: Whilst cannabis is not currently travelling huge distances, like some of the food we consume, protection is key at each point of the supply chain. Inputs into the growing process often come packaged, flowers and such are packaged for shipping and storage, bulk-packaged cannabis is sent to dispensaries, extractors, etc, and ultimately re-packed into what will become the consumer-facing packaging. Importantly for cannabis, it may require an additional level of protection to ensure children are not able to access the contents.

Preservation: Like any consumable item, cannabis has a shelf life, and packaging plays a key role in preserving the usability of the product. Whether it is a chocolate, a cannabis-infused drink, or flowers, it is critical that each product maintains a certain level of quality and consistency.

Promotion: Packaging allows one part of the supply chain to communicate specific elements of a product to those further along the supply chain. The most obvious, and for cannabis probably the most important, is the communication of contents within a packaged item (labeling), such as the percentage of CBD in a gummy or origin of a particular bud. Packaging is also the reflection of a brand, an image.

Taking these basic elements into account, we can apply a framework for designing and choosing more sustainable packaging. This framework for cannabis packaging accounts for and balances four principles: Fit for purpose, efficient, low impact and re-usable.

Fit-for-purpose. Essentially, this involves making sure that the packaging adequately performs the ‘3-Ps’ above. Packaging commonly accounts for less than 10% of the energy inputs that have gone into a complete product (for example, a candy packaged in a foil-lined plastic wrap). If the packaging fails to protect and preserve the candy, then the energy (or the water, the material, the investment) embedded in the product it contains is wasted.

The second principle relates to material efficiency. Once the packaging works, it is then important to minimize material and resource inputs. Effectively designed packaging uses lighter-weight materials and reduced numbers of materials and components. It also reduces air space and maximizes transport yields.

The third principle involves using low-impact materials. Material inputs should come from non-controversial sources, such as verified/certified supply chains and suppliers that have been assessed to ensure appropriate sustainability-related issues are addressed. Wherever possible, consider renewable and recycled-content inputs, and those made using renewable energy.

Finally, cannabis packaging should be re-usable, recoverable and/or recyclable at end of life. Consider materials and design formats that can be reused multiple times, and packaging that can be recycled and composted by consumers in the systems readily available. Linking back to the third ‘P’, Promotion can be used to make sure that your packaging clearly communicates what someone should do with your packaging. If it is recyclable, returnable, reusable or plantable, tell them it is and how to proceed.

Bear in mind that the most sustainable packaging options are often the result of thinking outside the box. The design process of your packaging should include brainstorming and researching outside of your own industry. What are new and innovative solutions, new materials, new ways to think about product conception that could negate the need for unnecessary packaging elements. New and innovative packaging solutions can raise your business’ profile, catch consumers’ attention and attract investors. It showcases your business as a forward-thinking one.

Packaging sustainability can look different for each and every cannabusiness. It is important to make sure that the four principles are part of your packaging selection/design process. As with any other sustainability issue, it is best to start thinking about packaging early on, and considering packaging as a part of the actual product system.

If you are not thinking about packaging sustainability, be assured that regulators, consumers and your industry peers are. Make sure you are driving the discussion about packaging, rather than being driven by those who may not fully understand your packaging needs.

October 27, 2015

Marijuana Matters

Food Processing & Cannabis Policy

By Stephen Goldner J.D.

No Comments

We have not seen food processing opportunities in the 45 years I’ve been in the industry like we are seeing in the cannabis food segment. There are still many legal, regulatory and policy misconceptions and this column is devoted to giving you some clarity. I hope this helps you make sensible business plans based on sound marketing opportunities.

It’s hard for many people to make the leap from thinking marijuana is illegal to knowing that food infused with marijuana is legal in 50% of the US, and quickly moving toward national legality. Any food processor that does not consider this opportunity to meet changing market dynamics risks losing a huge opportunity.

23 states, the District of Columbia and Guam now have comprehensive cannabis programs in place and many more are expected through Q4 of 2016. The voter approval, tax aspects and improved law enforcement profiles are highly favorable towards legalization and regulation. While marijuana itself can’t be shipped across state lines legally at this time, food-processing equipment is being sold, shipped, and installed every day of the week with no legal ramifications. The remaining problematic business aspects are rapidly moving through the solution phase, specifically labeling, tamper-evident and child resistant packaging, and payment methods.

Unlike other technology introductions, a mass market already exists and is clamoring for these food products. Therefore the ‘early movers’ are developing business relationships state by state to prepare food production lines that incorporate cannabis food production into cannabis processing companies.

Essentially, any state that allows cannabis dispensaries to exist will require food-processing equipment. In addition, states like Michigan where I reside, there are over 200,000 medical marijuana licenses issued to individuals, and over 250 unlicensed dispensaries. Michigan is getting ready for dispensary licensing and food production. We should anticipate inquiries from companies applying for food production licenses from any and all states as they are carefully attuned to their local state rules.

You can always contact me at this publication by clicking here and I’ll do my best to answer you that day or visit my website, Regulatory Affairs Associates.

Jurisdictions with active cannabis food production in USA: Arizona, California, Colorado, Connecticut, Delaware, Washington, D.C, Guam, Illinois, Maine, Maryland, Massachusetts, Michigan [coming soon], Minnesota, New Hampshire, New Jersey, New Mexico, New York, Rhode Island, Vermont, Washington

The next few articles in this series will focus on making certain your food production equipment will meet cannabis food production regulatory standards, the unusual payment procedures in this new industry, and relationship building since many of the new companies and their advisors will be new to you. Plus you really want to know their expectations of you.