Earlier this week Capitol Analysis Group, a cannabis-testing laboratory based in Lacey, Washington, announced they are conducting a “data-driven Lab Transparency Project, an effort to improve accuracy of cannabis testing results in the state through transparency and a new third-party auditing process,” according to a press release. They plan to look through the state’s traceability data to find patterns of deviations and possible foul play.
The project launch comes after Straightline Analytics, a Washington cannabis industry data company, released a report indicating they found rampant laboratory shopping to be present in the state. Lab shopping is a less-than-ethical business practice where cannabis producers look for the lab that will give them the most favorable results, particularly with respect to higher potency figures and lower contamination fail rates.“Lab shopping shouldn’t exist, because it is a symptom of lab variability,”
According to the press release, their report “shows that businesses that pay for the highest number of lab tests achieve, on average, reported potency levels 2.71% higher than do those that pay for the lowest number of lab tests.” They also found labs that provide higher potency figures tend to have the largest market share.
The Lab Transparency Project logo
The goal of The Lab Transparency Project is to provide summaries of lab data across the state, shining a light in particular on which labs provide the highest potency results. “Lab shopping shouldn’t exist, because it is a symptom of lab variability,” says Jeff Doughty, president of Capitol Analysis. “We already have standards that should prevent variations in lab results and proficiency testing that shows that the labs are capable of doing the testing.” The other piece to this project is independent third party auditing, where they hope other labs will collaborate in the name of transparency and honesty. “Problems arise when the auditors aren’t looking,” says Doughty. “Therefore, we’re creating the Lab Transparency Project to contribute to honesty and transparency in the testing industry.”
Dr. Jim McRae, founder of Straightline Analytics, and the author of that inflammatory report, has been a vocal critic of the Washington cannabis testing industry for years now. “I applaud Capitol Analysis for committing to this effort,” says McRae. “With the state’s new traceability system up and running following a 4-month breakdown, the time for openness and transparency is now.” Dr. McRae will be contributing to the summaries of lab data as part of the project.
According to Doughty, the project is designed to be a largely collaborative effort with other labs, dedicated to improving lab standards and transparency in the industry.
When processing cannabis, in any form, it is critical to remember that it is a product intended for human consumption. As such, strict attention must also be paid to food safety as well. With more and more states legalizing either medical or recreational cannabis, the potential for improper processing of the cannabis triggering an illness or death to the consumer is increasing.
The FDA Food Safety Modernization Act (FSMA) is the new food safety law that has resulted in seven new regulations, many which directly or indirectly impact the production and processing of cannabis. Under FSMA regulations, food processors must identify either known or reasonably foreseeable biological, chemical or physical hazards, assess the risks of each hazard, and implement controls to minimize or prevent them. The FSMA Preventive Controls for Human Foods (PCHF) regulation contains updated food “Good Manufacturing Practices (cGMPs) that are in many cases made a requirement in a state’s medical or recreational cannabis laws. These cGMPs can be found in 21 CFR 117 Subpart B.
It is imperative that cannabis manufacturers have a number of controls in place including management of suppliers providing the raw material.Food safety risks in cannabis processing could originate from bacteria, cleaning or agricultural chemicals, food allergens or small pieces of wood, glass or metal. The hazards that must be addressed could be natural, unintentionally introduced, or even intentionally introduced for economic benefit, and all must be controlled.
It is unlikely that high heat, used in other food products to remove bad bacteria would be used in the processing of cannabis as many of its desirable compounds are volatile and would dissipate under heating conditions. Therefore, any heat treatment needs to be carefully evaluated for effectiveness in killing bacterial pathogens while not damaging the valuable constituents of cannabis. Even when products are heated above temperatures that eliminate pathogens, if the raw materials are stored in a manner that permits mold growth, mycotoxins produced by molds that have been linked to cancer could be present, even after cooking the product. Storage of raw materials might require humidity controls to minimize the risk of mold. Also, pesticides and herbicides applied during the growth and harvesting of cannabis would be very difficult to remove during processing.
It is imperative that cannabis manufacturers have a number of controls in place including management of suppliers providing the raw material. Other controls that must be implemented include proper cannabis storage, handling and processing as well as food allergen control, and equipment/facility cleaning and sanitation practices. Processing facilities must adhere to Good Manufacturing Practices (GMP’s) for food processing, including controls such as employee hand washing and clothing (captive wear, hair nets, beard nets, removal of jewelry, and foot wear) that might contribute to contamination. A Pest Control plan must be implemented to prevent fecal and pathogen contamination from vermin such as rodents, insects, or birds.
Processing facilities must be designed for proper floor drainage to prevent standing water. Processing air should be properly filtered with airflow into the cannabis processing facility resulting in a slightly higher pressure than the surrounding air pressure, from the clean process area outwards. Toilet facilities with hand washing are essential, physically separated from the process areas. Food consumption areas must also be physically separate from processing and bathroom areas and have an available, dedicated hand sink nearby. Employee training and company procedures must be effective in keeping food out of the processing area. Labels and packaging must be stored in an orderly manner and controlled to prevent possible mix-up.Cleaning of the processing equipment is critical to minimize the risk of cross contamination and microbial growth.
Written food safety operational procedures including prerequisite programs, standard operating procedures (SOP’s), etc. must be implemented and monitored to ensure that the preventive controls are performed consistently. This could be manual written logs, electronic computerized data capture, etc., to ensure processes meet or exceed FSMA requirements.
A written corrective action program must be in place to ensure timely response to food safety problems related to cannabis processing problems when they occur and must include a preventive plan to reduce the chance of recurrence. The corrective actions must be documented by written records.
Supply chain controls must be in place. In addition, a full product recall plan is required, in the event that a hazard is identified in the marketplace to provide for timely recall of the contaminated product.
Cleaning of the processing equipment is critical to minimize the risk of cross contamination and microbial growth. The processing equipment must be designed for ease of cleaning with the minimum of disassembly and should conform to food industry standards, such as the 3-A Sanitary Standards, American Meat Institute’s Equipment Standards, the USDA Equipment Requirements, or the Baking Industry Sanitation Standards Committee (BISSC) Sanitation Standards ANSI/ASB/Z50.2-2008.
Serious food borne contaminations have occurred in the food industry, and cannabis processing is just as susceptible to foodborne contamination. These contaminations are not only a risk to consumer health, but they also burden the food processors with significant costs and potential financial liability.
Anyone processing cannabis in any form must be aware of the state regulatory requirements associated with their products and implement food safety programs to ensure a safe, desirable product for their customers.
With the state led legalization of both adult recreational and medical cannabis, there is a need for comprehensive and reliable analytical testing to ensure consumer safety and drug potency. Cannabis-testing laboratories receive high volumes of test requests from cannabis cultivators for testing quantitative and qualitative aspects of the plant. The testing market is growing as more states bring in stricter enforcement policies on testing. As the number of testing labs grow, it is anticipated that the laboratories that are now servicing other markets, including high throughput contract labs, will cross into cannabis testing as regulations free up. As the volume of tests each lab performs increases, the need for laboratories to make effective use of time and resource management, such as ensuring accurate and quick results, reports, regulatory compliance, quality assurance and many other aspects of data management becomes vital in staying competitive.
Cannabis Testing Workflows
To be commercially competitive, testing labs offer a comprehensive range of testing services. These services are available for both the medical and recreational cannabis markets, including:
Detection and quantification of both acid and neutral forms of cannabinoids
Screening for pesticide levels
Monitoring water activity to indicate the possibility of microbiological contamination
Moisture content measurements
Terpene profiling
Residual solvents and heavy metal testing
Fungi, molds, mycotoxin testing and many more
Although the testing workflows differ for each test, here is a basic overview of the operations carried out in a cannabis-testing lab:
Cannabis samples are received.
The samples are processed using techniques such as grinding and homogenization. This may be followed by extraction, filtration and evaporation.
A few samples will be isolated and concentrated by dissolving in solvents, while others may be derivatized using HPLC or GC reagents
The processed samples are then subjected to chromatographic separation using techniques such as HPLC, UHPLC, GC and GC-MS.
The separated components are then analyzed and identified for qualitative and quantitative analysis based on specialized standards and certified reference materials.
The quantified analytical data will be exported from the instruments and compiled with the corresponding sample data.
The test results are organized and reviewed by the lab personnel.
The finalized test results are reported in a compliant format and released to the client.
In order to ensure that cannabis testing laboratories function reliably, they are obliged to follow and execute certain organizational and regulatory protocols throughout the testing process. These involve critical factors that determine the accuracy of testing services of a laboratory.
Factors Critical to a Cannabis Testing Laboratory
Accreditations & Regulatory Compliance: Cannabis testing laboratories are subject to regulatory compliance requirements, accreditation standards, laboratory practices and policies at the state level. A standard that most cannabis testing labs comply to is ISO 17025, which sets the requirements of quality standards in testing laboratories. Accreditation to this standard represents the determination of competence by an independent third party referred to as the “Accreditation Body”. Accreditation ensures that laboratories are adhering to their methods. These testing facilities have mandatory participation in proficiency tests regularly in order to maintain accreditation.
Quality Assurance, Standards & Proficiency Testing: Quality assurance is in part achieved by implementing standard test methods that have been thoroughly validated. When standard methods are not available, the laboratory must validate their own methods. In addition to using valid and appropriate methods, accredited laboratories are also required to participate in appropriate and commercially available Proficiency Test Program or Inter-Laboratory Comparison Study. Both PT and ILC Programs provide laboratories with some measure of their analytic performance and compare that performance with other participating laboratories.
CloudLIMS Cannabis Testing LIMS: Multi-analyte Configuration for Cannabis Testing Services
Real-time Collaboration: Testing facilities generate metadata such as data derived from cannabis samples and infused products. The testing status and test results are best served for compliance and accessibility when integrated and stored on a centralized platform. This helps in timely data sharing and facilitates informed decision making, effective cooperation and relationships between cannabis testing facilities and growers. This platform is imperative for laboratories that have grown to high volume throughput where opportunities for errors exist. By matching test results to samples, this platform ensures consistent sample tracking and traceability. Finally, the platform is designed to provide immediate, real-time reporting to individual state or other regulatory bodies.
Personnel Management: Skilled scientific staff in cannabis-testing laboratories are required to oversee testing activities. Staff should have experience in analytical chromatography instruments such as HPLC and GC-MS. Since samples are often used for multi-analytes such as terpenes, cannabinoids, pesticides etc., the process often involves transferring samples and tests from one person to another within the testing facility. A chain of custody (CoC) is required to ensure traceability and ‘ownership’ for each person involved in the workflow.
LIMS for Laboratory Automation
Gathering, organizing and controlling laboratory-testing data can be time-consuming, labor-intensive and challenging for cannabis testing laboratories. Using spreadsheets and paper methods for this purpose is error-prone, makes data retrieval difficult and does not allow laboratories to easily adhere to regulatory guidelines. Manual systems are cumbersome, costly and lack efficiency. One way to meet this challenge is to switch to automated solutions that eliminate many of the mundane tasks that utilize valuable human resources.. Laboratory automation transforms the data management processes and as a result, improves the quality of services and provides faster turnaround time with significant cost savings. Automating the data management protocol will improve the quality of accountability, improve technical efficiency, and improve fiscal resources.
Real Time Test Status in CloudLIMS
A Laboratory Information Management System (LIMS) is a software tool for testing labs that aids efficient data management. A LIMS organizes, manages and communicates all laboratory test data and related information, such as sample and associated metadata, tests, Standard Operating Procedures (SOPs), test reports, and invoices. It also enables fully automated data exchange between instruments such as HPLCs, GC-FIDs, etc. to one consolidated location, thereby reducing transcription errors.
How LIMS Helps Cannabis Testing Labs
LIMS are much more capable than spreadsheets and paper-based tools for streamlining the analytical and operational lab activities and enhances the productivity and quality by eliminating manual data entry. Cloud-enabled LIMS systems such as CloudLIMS are often low in the total cost of acquisition, do not require IT staff and are scalable to help meet the ever changing business and regulatory compliance needs. Some of the key benefits of LIMS for automating a cannabis-testing laboratory are illustrated below [Table 1]:
Key Functionality
Benefit
Barcode label designing and printing
Enables proper labelling of samples and inventory
Follows GLP guidelines
Instant data capture by scanning barcodes
Facilitates quick client registration and sample access
3600 data traceability
Saves time and resources for locating samples and other records
Inventory and order management
Supports proactive planning/budgeting and real time accuracy
Custodian management
Promotes overall laboratory organization by assigning custodians for samples and tests
Maintains the Chain-of-custody (CoC)
Test management
Accommodates pre-loaded test protocols to quickly assign tests for incoming samples
Accounting for sample and inventory quantity
Automatically deducts sample and inventory quantities when consumed in tests
Package & shipment management
Manages incoming samples and samples that have been subcontracted to other laboratories
Electronic data import
Electronically imports test results and metadata from integrated instruments
Eliminates manual typographical errors
Report management
Generates accurate, customizable, meaningful and test reports for clients
Allows user to include signatures and additional sections for professional use
21 CFR Part 11 compliant
Authenticates laboratory activities with electronic signatures
ISO 17025 accreditation
Provides traceable documentary evidence required to achieve ISO 17025 accreditation
Audit trail capabilities
Adheres to regulatory standards by recording comprehensive audit logs for laboratory activities along with the date and time stamp
Centralized data management
Stores all the data in a single, secure database facilitating quick data retrieval
Workflow management
Promotes better data management and resource allocation
High-configurability
Enables modification of screens using graphical configuration tools to mirror testing workflows
State compliance systems
Integrates with state-required compliance reporting systems and communicates using API
Adheres to regulatory compliance
Creates Certificates of Analysis (CoA) to prove regulatory compliance for each batch as well as batch-by-batch variance analysis and other reports as needed.
Data security & confidentiality
Masks sensitive data from unauthorized user access
Cloud-based LIMS encrypts data at rest and in-transit while transmission between the client and the server
Global accessibility
Cloud-based LIMS provides real-time access to laboratory data from anytime anywhere
Real-time collaboration
Cloud-based LIMS enhances real-time communication within a laboratory, between a laboratory and its clients, and across a global organization with multiple sites
Table 1. Key functionality and benefits of LIMS for cannabis testing laboratories
Upon mapping the present day challenges faced by cannabis testing laboratories, adopting laboratory automation solutions becomes imperative. Cloud-based LIMS becomes a valuable tool for laboratory data management in cannabis testing laboratories. In addition to reducing manual workloads, and efficient resource management, it helps labs focus on productive lab operations while achieving compliance and regulatory goals with ease.
For about a month now, California’s adult use market has been open for business and the market is booming. About thirty days into the world’s largest adult use market launch, we are beginning to see side effects of the growing pains that come with adjusting the massive industry.
Consumers are also feeling sticker shock as the new taxes add up to a 40% increase in price.While the regulatory and licensing roll out has been relatively smooth, some municipalities are slower than others in welcoming the adult use cannabis industry. It took Los Angeles weeks longer than other counties to begin licensing dispensaries. Meanwhile, retailers in San Diego say the first month brought a huge influx of customers, challenging their abilities to meet higher-than-expected demand.
Businesses are struggling to deal with large amounts of cash, but California State Treasurer John Chiang may have a solution in store. Yesterday, his department announced they are planning to create a taxpayer-backed bank for cannabis businesses.
California’s plan for phasing in testing requirements.
In the regulatory realm, some are concerned that a loophole in the rules allows bigger cultivation operations to squeeze out the competition from smaller businesses. The California Growers Association filed a lawsuit against the California Department of Food and Agriculture to try and close this loophole, hoping to give smaller cultivators a leg up before bigger companies can dominate the market.
The Bureau of Cannabis Control (known as just “The Bureau”) began holding meetings and workshops to help cannabis businesses get acquainted with the new rules. Public licensing workshops in Irvine and San Diego held last week were designed to focus on information required for licensing and resources for planning. The Bureau also held their first cannabis advisory committee meeting, as well as announcing new subcommittees and an input survey to help the Bureau better meet business needs.
On the lab-testing front, the state has phased in cannabinoids, moisture content, residual solvent, pesticide, microbial impurities and homogeneity testing. On July 1, the state will phase in additional residual solvent and pesticide testing in addition to foreign material testing. At the end of 2018, they plan on requiring terpenoids, mycotoxins, heavy metals and water activity testing as well.
Last week, the Colorado Department of Revenue (DOR), the Colorado Department of Agriculture (CDA) and the Colorado Department of Public Health and Environment (CDPHE) announced a health and safety advisory for a large number of cannabis products grown and produced by Tree of Wellness Inc., doing business as Tree of Wellness. The health and safety advisory, synonymous with a product recall, was issued due to the detection of off-label pesticides in cannabis grown by Tree of Wellness.
Tests found Myclobutanil present in batches going all the way back to May, 2017, with some contaminated batches as recent as late October.
According to the press release, the CDA confirmed the presence of Myclobutanil, a near-ubiquitous fungicide used in a wide range of agricultural practices. The chemical has been a thorn in the side of the cannabis industry for being used off-label, or inappropriately, on cultivating cannabis.
Here are the batch numbers included in the recall
Myclobutanil is the active ingredient in Eagle 20, a pesticide used frequently in other agricultural fields like grapes, apples and spinach. According to UC Davis professor and Steep Hill scientist Dr. Don Land, Myclobutanil becomes significantly more dangerous when heated, or smoked. That chemical reaction produces hydrogen cyanide, an extraordinarily toxic chemical. Because of this, and the lack of research on what happens when these chemicals are burned or heated, there is a growing public concern that cannabis laced with a chemical like Myclobutanil can cause adverse health reactions.
The public health and safety advisory says they detected Myclobutanil in cannabis flower, trim, concentrates, and infused-products from Tree of Wellness. The CDPHE and DOR recommend consumers that have the affected products return them to where they were purchased for proper disposal.
Consumers in Colorado should check their labels to see if their products fall under the recall. Look for the Medical Optional Premises Cultivation License 403-00664 and/or Medical Marijuana Center License 402-00443. The recall includes batches of 23 different strains grown by Tree of Wellness.
According to a press release issued on Friday, September 22nd, the Colorado Department of Public Health and Environment (CDPHE), along with the Colorado Department of Revenue (DOR) and the Colorado Department of Agriculture (CDA), issued a public health and safety advisory for cannabis products tainted with pesticide residue.
The advisory was issued after the detection of pesticide residues on retail cannabis plant material and products with cannabis grown by RK Enterprises LTD, doing business as Rocky Mountain Remedies. The CDA confirmed that they detected the pesticide, Avermectin, an insecticide with a relatively high acute toxicity.
When pesticides like this are not on the list approved for use in cannabis cultivation, it is considered an off-label use. According to the press release, some of the products affected include flower, trim, concentrates and infused-products.
Consumers are advised to look at the label of their products and check to see if it matches the license number 403R-00180 and harvest batch numbers r206goldenkush9.11.17 and m206larryog9.11.17. Consumers are told to either dispose of the product properly or bring it back to the retail store where they purchased it.
Josh Drayton, deputy director of the California Cannabis Industry Association, has an extensive career in local and state-level politics, with his origins in Humboldt County as a political organizer. As a coffee shop owner about ten years ago in Humboldt, he let city council candidates use his space for community engagement, which eventually steered him towards a career in politics. As a heavily involved resident of Northern California and an advocate in local and state matters, he came to understand cannabis as a strong economic driver for the region and beyond.
Drayton saw firsthand how local economies benefit from cannabis as a source of income, economic activity, and providing occupational opportunities for many families in Humboldt County. After running a handful of local campaigns in the Humboldt region, Drayton served as deputy director for a state senate campaign in Riverside.
Josh Drayton, deputy director of the CCIA
Towards the end of his tenure with the Democratic Party in California, the state legislature began working on medical cannabis regulations. “As we saw those regulations moving through, cities and counties began to ban cannabis throughout the state, which was a very unintended consequence,” says Drayton. “The goal was to put regulations forward that would create a framework for the industry to survive and function under, but they were not very fond of cannabis at the time. It was clear that we had a lot of work to do.” Politicians shying away from cannabis issues and a lack of real representation in the legislature for those stakeholders drove him to leave the state’s senate for the California Cannabis Industry Association (CCIA).
In January of 2016, he jumped on board with the CCIA as their deputy director. Ahead of the California Cannabis Business Conference, September 21-22 in Anaheim, we sit down with Drayton to hear his take on the future of California’s cannabis regulations.
CannabisIndustryJournal: Give us a quick update on the regulatory framework in California and the changes we should expect.
Josh Drayton: One of the biggest challenges that California has faced has been the reconciliation of medical regulations with adult use regulations. Although California had medical cannabis legalized in 1996, we did not get those regulations put forward until 2015. That was called the Medical Cannabis Regulation and Safety Act. That was approved by the state legislature and signed by the governor into law. It was created in the legislature. When Prop 64 passed, the Adult Use of Marijuana Act, in November of 2016, it was passed through by a voter initiative. Any time that a piece of legislation goes to the voters, it trumps any legislation or regulations written by the state legislature. The real work has been to reconcile these two pieces of legislation into one regulatory structure. With that being said, we saw the initial trailer bill, attempting to reconcile these regulatory structures. That trailer bill is meant to address the new framework. Currently, we are waiting for the second viewing of the updated trailer bill SB 94 with all current amendments. Then we are anticipating those in the next couple weeks and we will see the regulations that will affect all these changes by November.
CIJ: How strong will local and municipal control be in the future?
Josh: It is incredibly strong and it is meant to be. I will say that California is like its own country. In Northern California, what they are willing to accept is very different in comparison to Southern California. Every city and county still has the ability to fully ban adult use and they can create and draft their own ordinances and regulations as long as it doesn’t go above state requirements. They can craft an ordinance to fit the needs of their city or county. Lets say you are in a rural area, delivery services might be important for patient access. Some areas might not allow brick and mortar dispensaries, and all that control lies in the cities and counties.
CIJ: Will there be a dosing limit for patients buying infused products? What about for adult use?
Josh: For adult use, there is going to be a limitation. Every edible has a maximum potency of 10mg of THC. For example, a chocolate bar can have a maximum of 100mg [of THC] but must be perforated in to 10mg pieces.
We have been advocating for, and what has been a priority for CCIA, is a lift of any sort of limits on medical infused products. Many patients have a higher threshold or tolerance and they may need 100mg and we don’t want them eating an entire chocolate bar to get that. We are anxiously awaiting the new trailer bill to see if we have been able to lift that concentration limit.
CIJ: Some have said the first draft of lab testing rules is extreme and overreaching. Can you speculate how those have been modified?
Josh: The lab testing is a huge educational issue for the industry and regulators. No state right now has been able to fully analyze the effects of different pesticide levels for a product that is smoked. We are basing all of our standards currently on food consumption. A lot of testing labs are concerned they are unable to test at the state’s threshold for some of these contaminants and pesticides; the detection limits seem very low. The testing portion will take years to work out, I am sure we will remove and add different pesticides and contaminants to the list. But again, the data and research isn’t fully there. There is a big push across the board that we will be able to do more research and testing so that the future of regulations can reflect reality, and ensure that consumer safety is priority.
CIJ: What do you think of the lack of residency requirement? When Oregon lifted it, outside investors flocked to the market. How might that impact local, California ownership and smaller businesses?
Josh: Well I do think that is a concern across the board. That is something that cities and counties have been adding to their requirements for the matrix of items needed to get a license. I think there is a very gray area when looking at investors opposed to operators. At what threshold does an investor become an owner? And if that person is from outside the state, how will that reflect on the evolution of the industry? It is a concern. Keeping limitations on the size of outdoor cultivation might help limit folks from outside the state coming into that arena. After living in Humboldt County for years, and living next to Mom and Pop growers for a long time, I don’t want to see them displaced by businesses coming from another area. We have been doing this a long time and I believe we have the best operators in the world.
CIJ: How is the CCIA helping businesses gear up for changing regulations?
Josh: Well one of our biggest areas of focus is education. Educating our own industry is one of the biggest parts in making sure the industry will be successful in this regulated market. Our legislative committee will take a position of support or opposition, which goes to our board, and those recommendations go to the state. The manufacturing committee has worked very closely with Lori Ajax [director of the Bureau of Cannabis Regulation] and her office, to educate on a variety of areas, guiding the way for state departments on how to properly regulate the industry. We have a Diversity and Inclusion Committee, Retail/Delivery, Testing, Distribution and Agricultural committees; across the board our committees create white papers that we submit to the regulatory departments of the state. We take regulatory officials on tours of facilities to get a hands-on view of what they are regulating. They have been speaking with scientists and growers, who often have a better understanding of current industry standards. We see these tours as very helpful. We have brought groups of regulators from LA County, Long Beach, Napa, Alameda and many others on tours of Bay Area commercial manufacturing facilities, dispensaries and nurseries. They have a lot of questions and we want to make sure we are a resource for them. Putting folks in touch with the right people and, in moving forward with this process, in an educated manner. Cannabis is a foreign language to many people and I get that.
CIJ: If you have one recommendation for regulators, what would that be?
Josh: My recommendation to regulators: do not over-tax this industry. Do not make taxation the priority for regulation. Over-taxation will strengthen the illicit market and that is not the goal. We need to make sure the taxes are reasonable to encourage businesses to operate in this market, not in the illegal one. If cities decide to ban, they need to know they can be hubs for illicit activity. Cities with bans might draw the illicit market because illegal operators won’t have to pay taxes or license fees. It is a long play, but responsible taxation is the best path to draw people out of this illicit market. We want to help protect public safety and health, safe medicine, safe products and keep cannabis out of the hands of children.
Broken Coast Cannabis Ltd., a cannabis business located on Vancouver Island, issued a voluntary recall of three cannabis lots due to the detection of pesticides. According to the safety alert published on Health Canada’s website, the voluntary Type III recall follows an inspection of the facility back in March of this year.
A Type III recall means those products are not likely to cause negative health effects. Sampling of those three cannabis lots found a cannabis oil product in July to contain low levels of Myclobutanil and Spinosad.
Upon further testing, a cannabis leaf sample was found to contain 0.017 parts-per-million of Myclobutanil. A third party laboratory confirmed the presence of that fungicide, leading them to recall three lots of dried cannabis sold between July and December of 2016, according to that safety alert.
Spinosad, an insecticide, and Myclobutanil, a fungicide, are not authorized for use with cannabis plants per the Pest Control Products Act, however they are approved for use in food production. The health risks of ingesting either of those two chemicals are well documented. “Health Canada has not received adverse reaction reports related to Broken Coast Cannabis Ltd.’s products sold affected by the recall,” reads the safety alert. “Health Canada recommends that any individual affected by the recall immediately stop using the recalled product and to contact Broken Coast Cannabis Ltd., at the following number 1-888-486-7579.”
On Monday, August 28th, attendees of the Cannabis Science Conference descended on Portland, Oregon for a week of educational talks, networking and studying the science of cannabis. On Monday, Chalice Farms, an extracts and infused products company, hosted the full-day JCanna Boot Camp focused on a deep dive behind the scenes of a cannabis production facility. The Cannabis Science Conference, hosted by Josh Crossney, founder of JCanna, takes place August 28th to 30th.
Attendees touring an extraction setup
Attendees were split into five groups where they listened to a variety of educational sessions and toured the facility. A track focused on cultivation, led by Autumn Karcey, president of Cultivo, Inc., detailed all things facility design for cannabis cultivation, including an in-depth look at sanitation and safety. For example, Karcey discussed HVAC cleanliness, floor-to-ceiling sanitation and the hazards associated with negative pressure. These principles, while applicable to most cultivating facilities, applies particularly to commercial-scale grows in a pharmaceutical setting.
Sandy Mangan and Tristan DeBona demonstrating the grinding technique for sample prep
During one session, Sandy Mangan, accounts manager at SPEX Sample Prep and Tristan DeBona, sales specialist at SPEX Sample Prep, demonstrated the basics of sample preparation for detecting pesticides in infused products, such as gummies. That required using their GenoGrinder and FreezerMill, which uses liquid nitrogen to make gummies brittle, then pulverizing them to a powder-like substance that is more conducive for a QuEChERS preparation.
Joe Konschnik and Susan Steinike demonstrate the QuEChERS method
Joe Konschnik, business development manager at Restek, Susan Steinike, product-marketing manager at Restek and Justin Steimling, an analytical chemist at Restek, gave a demonstration of a full QuEChERS extraction of a cannabis sample for pesticide analysis, with attendees participating to learn the basics of sample preparation for these types of tests.
Following those were some other notable talks, including a tour of the extraction instruments and equipment at Chalice Farms, a look inside their commercial kitchen and a discussion of edibles and product formulation. Dr. Uma Dhanabalan, founder of Uplifting Health and Wellness, a physician with over 30 years of experience in research and patient care, led a discussion of physician participation, patient education and drug delivery mechanisms.
Amanda Rigdon, Emerald Scientific, showing some complex matrices in cannabis products
Amanda Rigdon, chief technical officer of Emerald Scientific, offered a demonstration of easy and adaptable sample preparation techniques for potency testing of infused product matrices. Rigdon showed attendees of the boot camp how wildly diverse cannabis products are and how challenging it can be for labs to test them.
The JCanna Canna Boot Camp is a good example of an educational event catered to the cannabis industry that offers real, hands-on experience and actionable advice. Before the two-day conference this week, the boot camp provided a bird’s eye view for attendees of the science of cannabis.
Spectra Analytical LLC, doing business as Steep Hill Hawaii, was the first cannabis-testing laboratory to be licensed by the State of Hawaii and opened for business on August 1st. Today the lab announced they received ISO 17025:2005 certifications in biological and chemical testing from Perry Johnson Laboratory Accreditation, Inc., according to a press release.
Dana Ciccone, chief executive officer of Steep Hill Hawaii, has been a patient advocate and leader in cannabis education in Hawaii, as well as a member of the Hawaii Medical Marijuana Dispensary Task Force, an organization formed by the University of Hawaii College of Social Sciences Public Policy Center to develop regulations for the state. “We are proud not only to be the first cannabis lab to be licensed in the State of Hawaii, but also now the first lab to achieve ISO certification as well,” says Ciccone. “Industry businesses, medical professionals, state regulators, and patients can be confident that our lab and its testing standards will operate to the highest international standards.”
According to the press release, the laboratory will offer services for testing cannabinoid profiles (potency), terpenes, pesticides, heavy metals, biological screening, and residual solvents, testing for 17 Cannabinoids and 43 terpenes. The release states they are locally owned and operated, providing testing services for not just industry businesses, but in-state card-holding patients as well.
“This is a turning point for the industry – we have moved very quickly to raise the industry standards in Hawaii to internationally recognized certification,” says Ciccone. “I am very proud our scientific team for the professionalism and hard work they put in to achieve this certification.”
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
