Tag Archives: plan

April 12, 2021

Five Things Every Cannabis Business Needs Before They Open

By Tim Allen

When it comes to small business opportunities these days, few phrases give people the old dollar-sign-eyes more than “legal cannabis”.

From states like Michigan where it’s been approved for both medicinal and adult use, to places like South Carolina where legalization has been a popular topic for ballots and voters, cannabis is slowly turning into one of America’s biggest businesses.

You don’t need us to tell you that – Investopedia reports that (as of Nov. 2020) over 340,000 American jobs were devoted to the handling of plants at various stages along the retail cycle, and the industry was estimated at over $13 billion as of 2019.

Not bad for a plant that’s still technically illegal under federal law, huh?

If you’ve read this far, it probably means you’re hoping to be among the lucky ones who can strike it rich with their own cannabis business. A noble undertaking, but are you really prepared to make your mark? In a field as competitive – and occasionally complicated – as cannabis can be, you really need to lead with your best foot forward, and make sure you’re as well prepared for the various challenges of a fairly new industry as possible.

With that in mind, below is a list of the five things you’ll need to double-check and make sure you actually have access to before embarking on your new business venture.

The right shelving & equipment

You see this a lot with smaller businesses as well as, er, ‘independent growers’. A lot of people assume that they can just buy some greenhouse shelves, line the walls of their business with it, and call it a day, right?

Offering rare or unique cannabis strains is a great way to differentiate

This approach leads to problems more often than not. Even above and beyond the inherent concerns of helping your plants grow safely (and productively!), the sort of equipment you use should reflect the sort of business you’re trying to run. A cannabis retail outlet, for example, is going to need different sorts of shelves and tables than a dispensary or growing facility, as the work being done is completely different.

It will take a little research, but it helps that a lot of businesses these days are starting to offer shelving specifically designed for various cannabis operations. Check to see if any of the big warehouse suppliers near you have gotten into the cannabis game yet – Shelving Inc, Metro, and Rack & Shelf are a few of the bigger shelving names with cannabis offerings as of this writing.

Strong branding

Long gone are the days when all you needed to be successful in cannabis was a booth at the shady flea market, a pun name and a big sign that said “Head Shop” to throw off the authorities.

Far too many cannabis businesses launch themselves headlong into a business plan without stopping to think of a good name, or just settling for the first one they think of. With as crowded as the playing field is quickly becoming, it might honestly be worth it to pay someone to help you come up with a decent logo and branding – it’ll go a long way towards helping you stand out against everyone else using a green font. Places online like HIGHOPES specifically offer these services for cannabis businesses, so you know they’ll be able to figure out what you’re about more quickly.

An understanding of your consumer base

The exact sort of work your cannabis business performs is going to affect what your potential customer base can be – and vice versa.

Brands are embracing contemporary design more and more

Early on in the planning stages, make sure to figure out exactly who you’re going to sell your products to, as this will inform nearly every other decision your business makes. Do you want to sell directly to the customer, or to work as a distributor for CBD/cannabis retail outlets? Are you prepared to manage and run your own storefront, or are you just going to rent warehousing space to sell your plants to other retailers? If so, do you know who the businesses are in your area that you could work with? Or, if you are planning on entering the retail space, do you know how many other cannabis businesses could be operating in your desired geographical area? Finding an audience may be the hardest part of opening any business, but it’s important work.

Banking that understands your industry

Maybe the biggest drawback to being involved in an industry as comparatively new as cannabis, is that a lot of the old methods of doing business aren’t quite available to you. Many financial institutions of various sizes are limited in the ways they can help finance cannabis businesses, from not understanding the regulations and needs of your industry, all the way to being unable to assist cannabis businesses with banking in the first place.

Finding the right banking services can be challenging

It might be advantageous to look into banks, credit unions or financing companies in your area that specifically offer banking services (like business accounts and the like). A few examples include Aery Group from New Mexico, or Seed to Sale in Michigan. (It’s important to note that many of these companies, such as Aery Group, can only service the state they’re located in due to different state-by-state regulations – check ahead to make sure you find a place that can help you!)

Knowledge of the needed licensing and regulatory requirements

Getting a license to open any business is a tricky prospect on a good day, but for an industry as wide-ranging and varied as cannabis, getting licensed can require a lot of homework.

Even if you’re lucky enough to be setting up shop in a state that allows for the sale of cannabis, the licensing process can vary widely from state-to-state. In New Mexico, for example, it can take months to acquire a license simply due to the amount of paperwork, research and submissions required to cement your business. Before going too far down the rabbit hole of opening your business, make sure to take the time you need to completely research and understand the various local and state regulations you’ll need to adhere to for your business to get off the ground.

Obviously, there’s going to be a lot of other hurdles and requirements that come with starting a business – but by remembering these five things, you’ll be off to a much better start than many others.

March 30, 2021

Implement These Tips to Quickly Fortify Cannabis Dispensaries

By Heather Bender

No Comments

Based on the recent string of cannabis thefts in Portland, Oregon, the spotlight is shining even brighter on the need for enhanced security measures at cannabis dispensaries throughout the country. According to the Oregon Liquor Control Commission, the Portland metro area alone has experienced more than 120 cannabis shop burglaries since March 2020, resulting in a reported total loss of more than $500,000 in cash and products.

Robbing a cannabis dispensary is as lucrative as robbing a bank. Cash is king in the shops until the Secure and Fair Enforcement (SAFE) Banking Act is passed to prohibit federal banking regulators from penalizing depository institutions that provide banking services to legitimate cannabis businesses. Until the Act is passed, it is widely known that all transactions must be done in cash—which makes cannabis dispensaries a prime target for thieves.

Dispensaries are prime targets for burglary. Defending your storefront requires a comprehensive security plan.

While many security protocols—such as product traceability systems and security cameras—are mandated by each individual state, dispensary owners should take measures to actively secure their product, protect their employees and preserve their businesses as theft increases.

One of the quickest and most cost-effective ways to fortify shop security is by implementing rolling security doors. After determining what level of security is needed, consider these four tips to help deter criminal activity and ensure the safety of both employees and products.

Tip 1 – Defend The Storefront
Designed to prevent against looting events and burglaries, heavy-duty rolling steel doors offer cannabis business owners robust security. They can be retrofitted into existing buildings, are exterior mounted and are ideal for storefront defense—including protecting glass windows, which can be expensive to replace. Unlike more common rolling grilles, thieves can’t see merchandise when the rolling door is lowered. In addition to the door giving the building a secure look, blocking sight access is key to deterring criminals.

Heavy-duty steel doors must also be lift- and pry-resistant. Manufacturers put the doors through rigorous testing, and some security doors even meet Department of Defense forced entry standards, which can provide up to an hour of protection against violent attacks against the door to gain entry. Look for rolling security doors that can withstand heavy impact and resist pry attempts with common tools, as well as doors that are lift resistant. Some manufacturers offer doors with robust slide locks and rigid heavy-duty bottom bars, enabling the doors to withstand up to 4,500 lbs of lifting effort.

Tip 2 – Protect While Allowing Visibility and Airflow
If product visibility is desired, but more robust security is needed at the storefront—beyond a security measure such as impact glass—a heavy-duty security grille is an excellent choice. Security grilles are easy to custom order and don’t require structural modifications to fit individual spaces. They are easily installed behind storefront glass, are compact enough to remain out of sight when not in use and require little maintenance.

Strong rolling service doors can protect delivery entrances well

It’s important to work with a manufacturer to select a rolling grille that provides dependable, increased security. Choose grille curtains with rods that are spaced closer together and have heavier links. Security grilles with these features are harder to lift and pry than standard rolling grilles.

Rolling security grilles are also an ideal solution to protect counters inside the dispensary. They can be easily concealed in small headspaces where there is limited ceiling room.

Tip 3 – Fortify A Store Within A Store
For cannabis dispensaries located within high-end retail shops, it is important to consider additional security measures to separate the dispensary from the rest of the store.

A store within a store may be subject to different hours of operation as states often dictate specific operating hours for cannabis dispensaries. Altered operating hours necessitate an easy way to secure only a small section of a larger store.

If aesthetics are of concern inside retail shops, a woven metal mesh grille will provide both beauty and security without imposing looks while securing cannabis products as customers browse throughout the store. Manufacturers offer a variety of patterns and even logo designs as a way to bring more creativity to a grille’s aesthetics—making them rolling pieces of art.

Tip 4 – Secure Deliverables
Dispensary owners sometimes overlook the fact that thieves target deliveries. Deliveries that are made at the back of the store or in receiving areas may be the most at risk. It is of utmost importance to be aware of how deliveries are timed, who is present during them, and how the product is handed off.

Robust rolling service doors provide the best security for delivery entrances and are more secure than traditional rolling sectional doors. Made from slats of formed galvanized steel, aluminum or stainless steel, these rolling doors are completely customizable to meet existing building designs and are ideal for areas with limited overhead room.

Robust Protection
By closely evaluating the levels of security needed, the layout of the building and where deliveries take place, security updates and enhancements are easily implemented with the right rolling doors. Every door is made for a specific opening, so each one is custom-made for its application. Choose a knowledgeable manufacturer that will help determine which rolling closure suits the dispensary’s needs.

August 5, 2020

Cannabis Property Coverage: Understanding Risk Management & Communication

By Bradley Rutt

No Comments

For cannabis companies, property coverage can cost as much as seven to 10 times what traditional manufacturing and retail outlets pay. That is, of course, because of the inherent hazards involved in manufacturing and selling cannabis, in a difficult insurance market.

For landlords and building owners, taking in a cannabis tenant can be tricky as well. Because of the higher theft and manufacturing risks, many underwriters are unwilling to offer coverage. And, failure by a landlord to disclose a cannabis tenant is likely to result in a denied claim. Keeping property coverage in check by implementing risk management best practices and working to expand coverage and reduce premium costs can propel a cannabis business even further.

Moreover, some landlords and building owners will require businesses to maintain occurrence-based liability coverage, which is harder to secure when running a cannabis operation. An occurrence-based liability policy is one that covers the renter for an accident occurring during the policy period, regardless of when a claim is made.

Instead, some insurance companies will only cover cannabis business’ high risks with a claims-made policy, or one in which claims must be made during the policy period only. Landlords will often stipulate their requirement for an occurrence-based policy in their lease. That means that cannabis businesses with a claims-made policy could unknowingly be in violation of their lease.

These issues and others have allowed landlords to command premium rent from cannabis business owners who find obtaining the right property coverage difficult.

To calm the rising tide of rent and property coverage costs, cannabis business owners and operators can engage in the following risk management considerations.

Risk Management Considerations for Facilities with a Cannabis Operation

Carriers are more likely to provide a policy to cannabis businesses that are doing what they can to minimize their risk. Here are six ways cannabis businesses can reduce their costs, minimize exclusions and obtain broader property coverage.

If you are a retailer, have a plan to prevent or respond in the event of a robbery.
Install and know how to use vaults and safes properly.
Install central station alarms, cameras and other safeguards. Have them tied to your phone for easy access.
Depending on the nature of the operations, install and regularly test fire sprinklers on site to make sure they are in working order.
Consider hiring a third party, properly-insured, armed guard to safeguard your storefront on a regular basis.
Institute industry-known best practices for high-risk manufacturing processes, like oil extraction.

Insurance Considerations for Facilities with a Cannabis Operation

Risk management is critical to controlling risk, and insurance considerations can help your cannabis business obtain broader coverage and reduce premium costs.

Communicate with your insurance broker.If you’re a landlord and you want to rent to a cannabis tenant, have a conversation with your insurance carrier at least 30 days before the lease begins. Even if you do, there’s a good chance that your carrier will issue a notice of cancellation (NOC) because they don’t want to engage with cannabis risk. On the other hand, if you don’t disclose the new tenant risk, should a claim be filed, it will could be denied, and the non-disclosure could cost you your policy.
Engage a broker/carrier that specializes in cannabis.In such a volatile market, it is important to work with a broker and carrier that specialize in cannabis. This will enable hidden exclusions to be removed and help you procure the best policy and pricing possible for your organization.
Tell your insurance “story.”Let the carrier understand your business and its risks by telling them your “story.” Tell them what your business does well, including current risk management practices and how you’ve been able to reduce claims. This will go a long way toward potentially minimizing premium costs and exclusions and obtaining broader coverage.
Get another set of eyes. Most carriers will require a lengthy application from cannabis businesses in which the carrier may require the business to comply with certain requirements like having an approved safe or vault room. Your business will be held to the requirements stipulated in the application should you sign and submit it. Ask your broker or a reliable attorney to review the contract for anything you may have missed. Some carriers will incorporate the submitted application into the policy. Any changes between policy inception and a claim could cause coverage issues.

The fast-growing nature of the cannabis industry has ushered in a new set of challenges for business owners and operators. Keeping property coverage in check by implementing risk management best practices and working to expand coverage and reduce premium costs can propel a cannabis business even further.

June 17, 2020

Why Europe May Serve as an Important Bellwether for Hempcrete Use in the United States

By Stephanie McGraw

No Comments

Hemp-based construction materials are an attractive option for achieving environmentally friendly goals in construction, including reduced emissions and conservation of natural resources. Hemp construction materials dating back to the 6^th Century have been discovered in France and it has long been eyed with interest by hemp growers and manufacturers, as well as environmentalists in the United States and abroad. As the European Union moves forward with its 2019 European Green Deal, United States hemp, construction and limestone industries, as well as regulatory agencies, will be provided with an important preview of the benefits, risks and issues arising out of the use of hemp in construction.

The European Green Deal and Circular Economy Action Plan

Hemp applications in construction are gaining increased interest as the EU seeks to neutralize its greenhouse gas emissions by 2050. Much of the specifics for this transition to zero emissions are outlined in the EU’s “A New Circular Economy Action Plan,” announced on March 11, 2020. According to the EU, “This Circular Economy Action Plan provides a future-oriented agenda for achieving a cleaner and more competitive Europe in co-creation with economic actors, consumers, citizens and civil society organisations.” The plan aims at accelerating the transformational change required by the European Green Deal and tackles emissions and sustainability issues across a number of industries and products, including construction.

Construction in the EU accounts for approximately 50% of all extracted natural resources and more than 35% of the EU’s total waste generation. According to the plan, greenhouse gas emissions from material extraction, manufacturing of construction products and construction and renovation of buildings are estimated at 5-12% of total national greenhouse gas emissions. It is estimated that greater material efficiency could save 80% of those emissions. To achieve those savings, the plan announces various efforts to address sustainability, improve durability and increase energy efficiency of construction materials.

How Hemp Could Help Europe Achieve Neutral Emissions

Hemp, and specifically hempcrete, is being eyed with heightened interest as the EU enacts its plan. Indeed, recent mergers and acquisitions in the European hemp industry signal just how attractive this hemp-based product may be as international, national and local green initiatives gain momentum. But how would hemp be utilized in construction and what types of legal issues will this industry face as it expands?

The primary hemp-based construction material is “hempcrete.” Hempcrete is typically composed of hemp hurds (the center of the hemp plant’s stalk), water and lime (powdered limestone). These materials are mixed into a slurry. The slurry petrifies the hemp and the mixture turns into stone once it cures. Some applications mix other, traditional construction materials with the hempcrete. The material can be applied like stucco or turned into bricks. According to the National Hemp Association, hempcrete is non-toxic, does not release gaseous materials into the atmosphere, is mold-resistant, is fire– and pest-resistant, is energy-efficient and sustainable. To that last point, hemp, which is ready for harvest after approximately four months, provides clear advantages over modern construction materials, which are either mined or harvested from old forests. Furthermore, the use of lime instead of cement reduces the CO2 emissions of construction by about 80%.

Watching Europe with an Eye on Regulation and Liability Risks

Hempcrete indeed sounds like a wünder-product for the construction industry (and the hemp industry). Unfortunately, while it may alleviate some of the negative environmental impacts of the construction sector, it will not alleviate the threat of litigation in this industry, particularly in the litigious United States. The European Union’s experience with it will provide important insights for U.S. industries.

Hempcrete blocks being used in construction

Because hemp was only recently legalized in the United States with the passage of the 2018 Farm Bill, it is not included in mainstream building codes in the United States, the International Residential Code, nor the International Building Code. Fortunately, there are pathways for the consideration and use of non-traditional materials, like hempcrete, in building codes. However, construction applications of any form of hemp, including hempcrete, at this point would likely require extensive discussions with local building authorities and an application showing that the performance criteria for the building are satisfied by the material. Such criteria would include standards and testing relating to structural performance, thermal performance, and fire resistance. Importantly, the ASTM does have a subcommittee working on various performance standards for hemp in construction applications. European progress on this front would pave an important regulatory pathway for the United States, as well as provide base-line standards for evaluating hempcrete materials.

Insights into regulation and performance standards are not the only reason to watch the EU construction industry in the coming decades. Introduction of hempcrete and hemp-based building materials in the United States will likely stoke litigation surrounding these materials. Although there is no novel way to avoid the most common causes of construction litigation, including breach of contract, quality of construction, delays, non-payment and personal injury, the lessons learned in Europe could provide risk management and best-practice guidance for the U.S. industry. Of particular concern for the hemp industry should be the potential for product liability, warranty, and consumer protection litigation in the United States. The European experience with hempcrete’s structural performance, energy efficiency, mold-, pest- and fire-resistant properties will be informative, not just for the industry, but also for plaintiff attorneys. Ensuring that hempcrete has been tested appropriately and meets industry gold-standards will be paramount for the defense of such litigation and EU practices will be instructive.

The United States construction industry, and particularly hempcrete product manufacturers, should pay close attention as the EU expands green construction practices, including the use of hempcrete. The trials and errors of European industry counterparts will inform U.S. regulations, litigation and risk management best practices.

May 27, 2020

Priorities During the Pandemic: How to Run a Lab Under COVID-19

By Dr. Peter Krause, Udo Lampe

No Comments

During the COVID-19 pandemic, most testing laboratories have been classified as relevant for the system or as carrying out essential activities for national governments. Therefore, it is crucial to maintain activities and optimally assess the changes that are occurring, framed within the spread of the SARS-CoV-2 virus. Analytica Alimentaria GmbH, a testing laboratory with its headquarters in Berlin, Germany and a branch office in Almeria, Spain, decided to focus its management on the analysis of events and the options available, at the legal and employment level, to ensure continuity of activities and reducing, as much as possible, the damage for the parties involved: employees and company. Accredited by the International Accreditation Service (IAS) to ISO/IEC 17025:2017, Analytica Alimentaria GmbH is required to implement risk-based thinking to identify, assess and treat risks and opportunities for the laboratory. Since March 12, 2020 a crisis committee was established, formed by the six members of the company’s management, covering general management, human resources, direction of production, finance and IT. The committee meets every day and it intends to:

Minimize the risks of contagion
Be able to continue providing the service required by our clients
ensure that the company as a whole will survive the economic impact of the crisis
Take measures that are within the legality of both countries where the laboratory operates (Spain and Germany),
Manage internal and external communication related to the crisis

To achieve correct decision making, daily meetings of the committee were established, to review the situations that were presented day after day and the actions that should be carried out. Each decision was analysed in a prioritized, objective, collaborative and global way.

The basis of the lab’s action plan was a well-developed risk assessment. In addition to the risk of getting a droplet or smear/contact infection with the coronavirus SARS-CoV-2 (risk I) by contact with other people, psychological stress caused by changing working conditions (home office), contact options and information channels were also identified (risk II).

As a result of the risk assessment, the conclusion was that a mix of various measures is the best form of prevention:

Keep distance
Avoid “super spreader” events
Personal hygiene
Regular communication between managers and personnel about the current situation and possible scenarios

The risk assessment took both areas into account. The following assessment was developed together with an external specialist and focused on risk I:

Risk I	Assessment	Protective measures / hygiene plan
Organisation
Working hours and break arrangements	High	Limit the gathering of people and ensure a minimum distance: Relocated work, break and mealtimes Create fixed groups of shift-working staff Time gap of 20 min. between the shifts Enable home office wherever it is possible
Third party access	Moderate	Few but “well-known” visitors: Reduce the number of visits and keep internal contacts to a minimum Ensure the contact chain Inform visitors about the internal rules and obtain written consent
Dealing with suspected cases	High	Isolation and immediate leave of the company: Contactless fever measurement (in case of typical symptoms) Leave the company or stay at home If the infection is confirmed, find contact persons (including customers or visitors) and inform them about a possible risk of infection
Contact with other persons
Traffic route from home to work	Moderate	Avoid public transportation: Take a car, bicycle or go by foot Enable mobile work and teleworking
At work	High	Always keep a sufficient distance of 2.0 m from people: If minimum distances cannot be maintained, wear protective masks or install physical barriers (acrylic glass) Organize traffic routes so that minimum distances can be maintained (one-way routes, floor markings indicating a distance of 2 m) Use digital meetings instead of physical ones
Sanitary facilities	Moderate	Remove virus-loaded droplet as often as possible: Provide skin-friendly liquid soaps and towel dispensers Shorten or intensify cleaning intervals Hang out instructions for washing hands at the sink Include instructions for proper hand-disinfection
Canteens, tea kitchens and break rooms	High	One person per 10 m² = minimum: Reduce the number of chairs per table Informative signs in every room, indicating the maximum number of permitted persons
Ventilation	High	Diluting or removing bioaerosols (1 µm virus-droplets): Leave as many doors open as possible Regular and documented shock ventilation every 30 minutes or more frequently, depending on the size of window Operate ventilation and air-conditioning systems, since the transmission risk is classified as low here
Use of work equipment	Moderate	Use tools and work equipment for personal use: Regular cleaning with changing use (PC, hand tools, coffee machine, …) If possible, use gloves when using equipment for a larger number of users
Protective masks	Moderate	Use of protective masks as an additional measure, indicating that this does not replace keeping distance Recommend wearing masks in commonly used areas and explain that they do not protect yourself, but help to protect others Give clear instructions (written and oral) on how to use a mask correctly and explain the use and purpose of different mask-types Distribute masks freely

A number of guidelines and concrete measures addressing the risks related to health issues are already in place. Those health issues in risk group II are more closely related to the psychological effects of the crisis, however, are also more complex to mitigate. The key strategy is communication and, in particular, actively listening to all employees of the company.

Analytica’s robust company culture, based on values established in coordination with the whole staff, has been of significant help during the crisis. The some 150 staff members are organized by over 22 team coordinators. During the crisis, active communication has been intensified significantly. The crisis management team set up regular alignment meetings with all the coordinators and with individual persons with particular situations. This way, not only was it possible to explain the development of the crisis and the subsequent measures, the conversations with coordinators were also the most important source of information enabling the appropriate decisions. The coordinators, closely aligned and in sync with management, were then able to communicate with their team members with a high degree of confidence. One outcome of the communication was a measure that proved very effective in fortifying trust within the company: all measures and evaluations, as well as a chronological review, are published in a dynamic internal report and are made available, with full transparency, to all staff members. Besides the many individual and group alignment meetings (usually held by video conference), this has been a key measure to establish confidence and security within the company.

On the other hand, the company made a great effort to balance the effect of the general closure of kindergartens and schools in Spain and Germany. Each case where staff members were required to care for children at home was studied individually and agreements were established, adapting shifts and making use of time accounts, to allow childcare at home without significant loss of income.

The success of the measures is shown by the continuous work of both laboratories during the crisis. Besides the personal tragedy of a possible infection, the identified risk to the company has the consequence of a (partial) quarantine due to an infected person in contact with the staff and the consequent loss of work-power which might lead, in extreme cases, to a closure of the laboratory. According to the governmental regulation in Germany, if an infection occurs (confirmed by the health department), contact persons cat. 1 (more than 15 min. contact face to face) are identified and sent to quarantine. Other contact persons, e.g. contact persons cat. 2 (same room without face to face) must be identified quickly with the collaboration of the infected person and notified and, if necessary, sent in quarantine. In this case, there is a confirmed emergency plan that maintains the laboratory’s ability to work, defining replacements and alternative work-flow strategies.

It has been part of our strategy to validate all our measures with the relevant guidance documents made available by the official competent institutions. The German Federal Office for Public Safety and Civil Protection (Bundesamt für Bevölkerungsschutz und Katastrophenhilfe) has published a guide, “Crisis Management in Companies, 9-point Checklist” especially for critical infrastructure companies in the CoVid-19 crisis.

Having been classified as a core business enterprise (Spain) and “relevant to the system” (Germany), we consider it important to use them as a reference to confirm our level of alignment with your proposal for crisis management.

An important effect, relevant to any leader in times of crisis, is that the confirmation of all points of such a checklist provides certain peace of mind regarding the question: Have we done everything we could?

April 29, 2020

HACCP for Cannabis: A Guide for Developing a Plan

By Radojka Barycki

1 Comment

Hazard Analysis and Critical Control Points (HACCP) is a systematic approach that evaluates hazards that may potentially be present in food products that can harm the consumer. The process used to manufacture the product is evaluated from raw material procurement, receiving and handling, to manufacturing, distribution and consumption of the finished product¹. The documented process is what is known as HACCP plan. Although HACCP was designed to evaluate hazards in foods, it can be used to assess or evaluate hazards that may potentially be present in cannabis consumable products (edibles and vaping) that can cause harm to the consumer.

HACCP plan development requires a systematic approach that covers 5 preliminary steps and 7 principles. A systematic approach means that each step must be followed as outlined. Skipping a step will result in a HACCP plan that most likely will be ineffective to control potential hazards in the product.

The 5 preliminary steps are:

Establish a HACCP team
Describe the product
Establish the intended use of the product
Develop a flow diagram
Verify the flow diagram

The 7 Principles are:

Conduct a hazard analysis
Identify the critical control points (CCPs)
Establish critical limits (CL)
Establish monitoring procedures
Establish corrective actions
Establish verification procedures
Establish records and record keeping procedures^1,2

It is important to mention that HACCP plans are supported by programs and procedures that establish the minimum operational and sanitary conditions to manufacture safe products. These programs and procedures are known as pre-requisite programs (PRP) or preventative controls^1,2.

A multidisciplinary team must be established in order to ensure that all inputs of the product manufacturing process are considered during the hazards analysis discussions. The description of the product and its intended use provides detail information on ingredients, primary packaging material, methods of distribution, chemical characteristics, labeling and if any consumer might be vulnerable to the consumption of the product. A verified flow diagram is an accurate representation of the different steps followed during the product manufacturing process and will be used to conduct a hazard analysis. An inaccurate flow diagram will set the stage for an inadequate HACCP plan. Therefore, it is important that the HACCP team members verify the flow diagram. Figure 1 is a flow diagram for a fictional infused apple juice manufacturing plan that I will be using as an example.

The hazard analysis is the backbone of the HACCP plan. There are two elements that must be considered when conducting the hazard analysis:

Identification of the hazard associated with the ingredient(s) and/or the product manufacturing steps. These hazards have been categorized as: Biological, chemical (including radiological) and physical. Biological, chemical and physical hazards should be considered for each ingredient, primary packaging and process step. Also, it is important that the team is specific as to what hazard they are referring to. I often find that biological hazards are identified as “pathogens” for example. The team has to be specific on which pathogen is of concern. For example, if you are processing apple juice, the pathogens of concern are pathogenic coli and Salmonella sp. However, if you are processing carrot juice, you need to add Clostridium botulinum as a biological hazard also. If the choice of method to eliminate the hazards is pasteurization for example, the processing temperature-time combinations will differ greatly when manufacturing the apple juice vs. the carrot juice as C. botulinum is an organism that can sporulate and, therefore, is harder to kill.
Characterization of the hazard. This implies determining the significance of the potential hazard based on the severity of the consequence if it is consumed and the likelihood of occurrence in the ingredient or process step. Only steps in the process that has significant hazards should be considered further.

In my professional experience, the hazard analysis is one of the most difficult steps to achieve because it requires the expertise of the multidisciplinary team and a lot of discussion to get to the conclusion of which hazard is significant. I find that a lot of teams get overwhelmed during this process because they consider that everything in the process may represent a hazard. So, when I am working with clients or providing training, I remind everyone that, in the bigger scheme of things, we can get stricken by a lighting in the middle of a thunderstorm. However, what will increase our chances would be whether we are close or not to a body of water for example. If I am swimming in the middle of a lake, I increase my chances to get stricken by the lighting. In comparison, if I am just sitting in my living room drinking a cup of coffee during the thunderstorm, the likelihood of being stricken by a lighting is a lot less. The same rationale should be applied when conducting the hazard analysis for manufactured products. You may have a hazard that will cause illness or death (high on the severity chart) but you also may have a program that mitigates the likelihood of introducing or having the hazard. The program will reduce the significance of the hazard to a level that may not need a critical control point to minimize or eliminate it.

Clear as mud, right? So, how would this look like on the infused apple juice example? Table 1 shows the hazard analysis for the ingredients. Tables 2 and 3 show the hazard analysis for the part of the process. In addition, I have identified the CCPs: Patulin testing and pasteurization. There is a tool called the CCP decision tree that is often used to determine the CCPs in the process.

Once we have the CCPs, we need to establish the critical limits to ensure that the hazard is controlled. These limits must be validated. In the case of Patulin, the FDA has done several studies and has established 50 ppm as the maximum limit. In the case of pasteurization, a validation study can be conducted in the juice by a 3^rd party laboratory. These studies typically are called thermal death studies (TDS) and provide the temperature and time combination to achieve the reduction of the pathogen(s) of concern to an acceptable level that they do not cause harm. In juice, the regulatory requirement is a 5-log reduction. So, let’s say that the TDS conducted in the infused apple juice determined that 165°F for 5 seconds is the critical limit for pasteurization. Note that the 5 seconds will be provided by the flow of the product through the holding tube of the pasteurizer. This is measured based on flow in gallons per minute.

Monitoring is essential to ensure that the critical limits are met. A monitoring plan that outlines what, how, when and who is responsible for the monitoring is required.

Ideally, the system should not fail. However, in a manufacturing environment, failures can happen. Therefore, it is important to pre-establish steps that will be taken to ensure that the product is not out of the control of the facility in the event of a deviation from the HACCP plan. These steps are called corrective actions and must be verified once they are completed. Corrective actions procedures must address the control of the product, investigation of the event, corrective actions taken so the deviation doesn’t reoccur and product disposition.

Table 4. HACCP Plan Summary

Verification activities ensure that the HACCP plan is being followed as written. Typically, verification is done by reviewing the records associated with the plan. These records include but are not limited to monitoring records, calibration records, corrective action records, and preventive maintenance records for equipment associated with the CCPs. Record review must be done within 7 working days of the record being produced.

Finally, establishing records and record keeping procedures is the last step on developing HACCP plans. Records must be kept in a dry and secure location.

Table 4 show the summary of the HACCP plan for the infused apple juice example.

For more information on how to develop a HACCP plan for your facility, read the resources below:

HACCP Principles and Application Guidelines – The National Advisory Committee on Microbiological Criteria for Foods (NACMCF)
ASTM D8250-19: Standard Practice for Applying a Hazard Analysis Critical Control Points (HACCP) Systems for Cannabis Consumable Products

April 8, 2020

Following Up: Questions From The Infused Products Virtual Conference Answered

By Ellice Ogle

No Comments

If you missed the Cannabis Industry Journal’s 3rd Annual Infused Products Virtual Conference last week, one of the speakers, Ellice Ogle, founder and CEO of Tandem Food presented on Food Safety Culture in the Cannabis Industry. An overview of the information in the presentation can be found here, Concentrate On a Food Safety Culture In Your Workplace. Below are answers to some of the post-presentation questions we received, but were unable to answer during the Q&A session. To get your additional questions answered or for a complimentary consultation for your company, specially provided to readers of Cannabis Industry Journal, contact Ellice Ogle at Ellice@tndmfood.com.

Question: What are some recommended digital programs for internal auditing?

Ellice Ogle: Before looking at the tools for conducting an internal audit, understand the goal of the internal audit. One key aspect of internal auditing is knowing which standard(s) to audit against. For example, regulatory audits for cGMP certification are different than optional third-party certifications such as any GFSI scheme (SQF, BRC, PrimusGFS, etc). While the standards ultimately have the same goal of food safety with varying focuses, it is important to have an experienced food safety specialist conduct the audit as realistically as possible. The experienced specialist will then be able to recommend an appropriate tool for internal auditing moving forward, whether it is software such as FoodLogiQ, SafetyChain, Safefood 360°, among many others, or simply providing a template of the audit checklist. Overall, the risk of foodborne illnesses can be minimal, but it takes persistence and commitment to achieve a successful food safety culture. Metrics can assist in assessing the commitment to food safety and, as a result of these efforts, you will minimize the risk of compromising the health and safety of your guests, employees, foods and business. If you want a specific example, I’d like to direct you to a case study in partnership with Heylo LLC in Washington state, posted on the Tandem Food website.

Q: What are examples of ways to share environmental monitoring results to enhance a good edible safety culture?

Ellice: In the Control of Listeria monocytogenes in Ready-To-Eat Foods: Guidance for Industry Draft Guidance (2017), the FDA states that “a well-designed environmental monitoring program promotes knowledge and awareness of the environmental conditions that could result in product contamination and is a more effective program than product testing alone.” In other words, environmental monitoring programs and results can identify environmental conditions within a facility that could cause potential contamination. Publishing these findings, for example in the form of a case study or sharing the details of the practice, can enhance the food safety culture in the specific niche industry. For example, to borrow from the meat industry, Tyson Foods, Inc developed and shared environmental monitoring programs that are used by their peers, promoting a unified food safety culture, rather than competitive, guarded secrecy.

Q: Are the food safety requirements the same for retail and manufacturing?

Ellice: The food safety requirements are not exactly the same for retailers and manufacturers. The difference is inherent that retailers are working with finished product while manufacturers are working with raw ingredients and the manufacturing process to develop the finished product. Let’s take a closer look at cannabis regulation in Washington state. Chapter 314-55-104(12) states “Processors creating marijuana extracts must develop standard operating procedures (SOPs), good manufacturing practices (GMPs), and a training plan prior to producing extracts for the marketplace.” Compare this to the requirements for retailers, 314-55-105(11) which states “A marijuana producer, processor or retailer licensed by the WSLCB must conduct the production, processing, storage, and sale of marijuana-infused products using sanitary practices.” While SOPs and GMPs are not explicitly mentioned for retailers as they are for manufacturers, sanitary practices could be documented as Sanitation Standard Operating Procedures (SSOPs). Proper storage practices can also be an overlapping food safety concern with respect to temperature control or pest management systems. Overall, food safety should remain a top priority in maintaining the integrity of the products throughout the supply chain.

Q: To your knowledge, has there been a food safety outbreak associated with a cannabis-based product?

Ellice: One possible cannabis-related death investigated in 2017 uncovered deadly pathogens in medical cannabis. However, to my knowledge, I have not seen a food safety outbreak associated with a cannabis-based product. There might be any number of reasons that this is so, for example, possibly because a food safety outbreak associated with a cannabis-based product might not have had a large impact to make headlines. Although, with the cannabis industry already misunderstood and a stigma so prevalent to even promote fake news, it is better to prevent an outbreak from ever occurring. One thing to note is that ultimately cannabis is just another ingredient in existing products, of course with special properties. So, the common food safety offenders are present: listeria, Salmonella, E. Coli, among others. On the plant, cannabis food product manufacturers must minimize the risk of mycotoxins produced by molds, pest contamination, and pesticide contamination. For products that contain cannabis infusions or extractions as an ingredient, there is the possibility of the growth of Botulism toxin. Many of these pathogens can be minimized by appropriate heat treatment or maintenance of refrigeration, testing, and by practicing preventive measures. Arguably, the largest potential for pathogenic contamination is due to improper employee handling. To refer to what we discussed earlier, employee training is key, as well as proper enforcement. Having a strong food safety culture ensures that people have the knowledge of food safety risks and the knowledge of preventing outbreaks.

Q: Do any of the panelists know of any efforts to develop a food safety-oriented standard for the cannabis industry?

Ellice: One example of a specific effort to develop a food safety-oriented standard for the cannabis industry includes TraceTrust A True Dose™ & hGMP™ certification. However, there are efforts for other standards that have food safety included. Take organic certification, there are several companies creating and auditing against their own standard such as Clean Green Certified, Oregon Sungrown Farm Certification, or Washington Sungrowers Industry Association. The California Department of Food and Agriculture (CDFA) is also preparing a cannabis program comparable to the USA National Organic Program.

Q: Can you assist with cGMP certification?

Ellice: Yes, Tandem Food LLC is positioned to consult on cGMP certification for manufacturing facilities in the cannabis industry. First, a gap assessment can be conducted to obtain useful actionable data for you, rather than be an intimidating experience. Working from the identified baseline, Tandem Food will work with you to create and implement all related documentation and programs, providing training as necessary. Overall, with the right commitment, cGMP certification can take 6-12 months.

March 12, 2020

5 Factors to Keep in Mind When Entering the Regulated Market

By David Perkins

No Comments

It’s a different world growing cannabis in California- in fact, it’s a completely different experience than it was even four years ago. It can be overwhelming to begin the process, which is where an experienced cultivation consultant can help. This article will highlight 5 factors to keep in mind before you begin growing in California’s regulated recreational market.

Start Up – Costs, needs & endless variables

So you’ve decided to begin a recreational grow, here are the factors to consider before you get started.

Permitting, the necessary pre-cursor to cultivation, can be time- consuming, extremely expensive, and overwhelming. General experience dictates that any grow will take longer than planned and cost way more money than you ever expected or anticipated. Always account for more money and time than you think you need. Working with an experienced consultant can help you plan and account for all the costs and variables you may not have considered, prior to beginning cultivation, in order to ensure your success.

Understand that growing boutique style cannabis is very difficult on a large scale, consistently.

Equipment. When choosing what equipment to use, stick to reputable equipment manufacturers. Don’t just go with the latest high-tech gear because you see it on Instagram being advertised by a big, fancy grow operation. Stick to what you know best. Do your homework and research the equipment as much as possible, prior to purchase. Use equipment that has been tested and well documented with success. Some questions to ask yourself: is this necessary? Is it cost effective? Will it help me reach my goals?

Grow your business slowly and naturally. Getting too big too quick will most likely expose inefficiencies in your operating plan, which will be further compounded when production increases. Don’t sink before you can swim and start out on a massive scale before you have perfected your process.

Cultivation – It pays to design it right the first time

Success begins in the grow room. Never forget that. A properly engineered cultivation plan can be the difference between 3 and 6 harvests per year. Again, it is imperative here to do your homework. A well-thought-out plan can make or break you, and that is where an experienced cultivation consultant can help.

Set realistic expectations. Understand that growing boutique style cannabis is very difficult on a large scale, consistently. Don’t expect to grow perfect cannabis every time – it is unrealistic and can ultimately lead to failure if your financial model depends on it. Growing a plant, while mostly in your control, involves too many variables to rely on a perfect outcome round after round. You can do everything in your power, yet something unexpected can still happen and be detrimental to your yield, and therefore your profit. You must expect and plan for this.

Automating as much of your grow as possible is always a good idea. This will greatly reduce labor costs and more importantly, minimize human error. In some instances, it will even allow you to review data and information remotely, in real time, allowing you to ensure your cultivation site is always running as efficiently as possible, even when you aren’t there.

Processing – Don’t skimp on the process

If you are going to be harvesting cannabis for flower, it is imperative to have a properly built facility for drying, curing and storing your product. You must consider that this building will need to be large enough to house and properly store all of your harvest at once. This can make or break your crop at harvest time. If you don’t have the capacity to handle your harvest properly, it can lead to disastrous issues such as mold or too quick of a cure – conditions which make your cannabis unsellable in the regulated market.

dry cannabis plants — Rows of cannabis plants drying and curing following harvest

Although costly, if done correctly, you can also design this area to serve as your propagation, trimming, and breeding areas, which will ultimately save on costs in the long run.

Also keep in mind, hand trimmed cannabis will always look more appealing to the consumer than machine trimmed cannabis. However, hand trimming can be time-consuming, labor-intensive, and therefore far more costly than machine trimming. These are factors you will need to consider and budget for when deciding how to proceed. If you use a machine, you may save money up front, but will you be able to sell your cannabis at full price?

Distribution – Have a plan

It is a good idea to have a plan for distribution, prior to start up. If you have an agreement with a retail outlet (or contract with a distributor) in writing, you will protect yourself from financial failure. Cannabis will never grow more valuable over time, therefore, you want to have a plan in place for distribution, as soon as the cannabis is harvested and processed. Just as was the case in the black-market days, you never want to hold on to your cannabis for long periods of time.

Do not distribute without agreements in writing! While some oral agreements may be enforceable, it will be extremely costly to litigate. Therefore, you should plan to hire a lawyer beforehand to create fail-proof agreements that will hold up in court, should a distributor not pay you for your product.

Sales – Build your brand, but be realistic

Building your brand is important. And if you don’t produce your own high-quality flower you cannot expect to have a product up to your standards. Your brand will not be successful if you cannot consistently provide consumers with high quality cannabis. Relying on other growers to produce your cannabis for you is risky to your brand. Even if you are a manufacturer, you may not be able to rely on other suppliers to maintain the quality volume you need in order to manufacture your products consistently.

The regulated market in California is new. Therefore you must necessarily account for a great degree of price fluctuations in the market. When creating your budget at the outset, you must account for fluctuations in profit. Knowing when prices are going to be at their lowest can help you avoid having an oversupply of inventory. It can also help you avoid such situations by planning your cultivation/harvest accordingly.

There are both consumer and government influenced market trends that can affect your bottom line. These must be accounted for at the outset.

On the consumer level, you must know what people are buying and how they are consuming. And these factors can change quickly with the introduction of new technology, methods or new devices intended for cannabis consumption. You must stay on top of these trends.

The government regulations can also affect these trends. Products used for cultivation can become banned, i.e. products you once relied on in your cultivation can be found to have contaminants known to cause test failures, even in “approved products.”

Ultimately, all of these factors can make or break your success, and therefore, must be considered, researched and accounted for prior to beginning your cultivation in the regulated market. Working with a consultant with over 20 years of grow experience, and more importantly, extensive experience in large scale cultivation in the regulated market, can help you achieve the success you desire. Cultivation in the regulated market is costly, but working with a consultant can help you cut costs at the outset, and save you from unexpected expenses in the long run.

March 2, 2020

Product Safety Hazards: Looking Beyond Food Safety in Cannabis

By Radojka Barycki

No Comments

I think that we need to start changing the terminology around the hazards associated with cannabis from food safety hazards to product safety hazards. These hazards have not only been associated with harmful effects for those that ingest cannabis infused products, but also for those that consume the cannabis products in other ways such as inhalation (vaping or smoking). So, when we refer to these hazards as food safety hazards, the immediate thought is edibles, which misleads cultivators, manufacturers and consumers to have a false sense of security around the safety of products that are consumed in other ways.

Food processing and sanitation — By standardizing and documenting safety procedures, manufacturers mitigate the risk of cannabis-specific concerns

There are several product safety hazards that have been associated with cannabis. These hazards can become a public health problem if not controlled as they could harm the consumer, regardless of the method of consumption.

Let’s take a look at the different types of hazards associated cannabis:

Biological Hazards refer to those microorganisms that can cause illness to the consumer of a product that contain them. They are not visible to the naked eye and are very dangerous when their metabolic by-products (toxins) are ingested or their spores are inhaled. The symptoms for illnesses caused by these microorganisms will vary. Consumers may experience gastrointestinal discomfort (vomiting, diarrhea), headaches, fever and other symptoms. The ingestion of these pathogens, allergens or their by-products may lead to death, if the illness is not treated on time or if the consumer of the product is immunocompromised. In addition, the inhalation of mold spores when smoking cannabis products, can lead to lung disease and death. Some of the biological hazards associated with cannabis are: Salmonella sp., E. coli, Clostridium botulinum, Aspergillus sp. and Penicillium sp.

Chemical Hazards refer to those chemicals that can be present in the plant or finished product due to human applications (pesticides), operational processes (extraction solvents and cleaning chemicals), soil properties (heavy metals), environmental contamination (radiological chemicals) or as a result of occurring naturally (mycotoxins and allergens). Consuming high concentrations of cleaning chemicals in a product can lead to a wide range of symptoms from mild rash, burning sensation in the oral-respiratory system, gastrointestinal discomfort or death. In addition, long term exposure to chemicals such as pesticides, heavy metals, radiological contaminants and mycotoxins may lead to the development of cancers.

Physical Hazards refer to those foreign materials that may be present in the plant or finished product. Foreign materials such as rocks, plastics or metals can cause harm to the consumer by chipping teeth or laceration of the mouth membranes (lips, inner cheeks, tong, esophagus, etc.) In the worst-case scenario, physical hazards may lead to choking, which can cause death due to asphyxiation.

These hazards can be prevented, eliminated or reduced to an acceptable level when foundational programs (Good Agricultural/Cultivation Practices, Good Manufacturing Practices, Allergen Management Program, Pest Control, etc.) are combined with a Food [Product] Safety Plan. These lead to a Food [Product] Safety Management System that is designed to keep consumers safe, regardless of the method of consumption.

February 28, 2020

Comparable to Organic: How This California Company Aims to Certify Cannabis

By Aaron G. Biros

No Comments

Cannabis that contains more than 0.3% THC is not eligible for USDA organic certification, due to the crop’s Schedule I status. While some hemp farmers are currently on the path to obtain a USDA organic certification, the rest of the cannabis industry is left without that ability.

Growers, producers, manufacturers and dispensaries that utilize the same practices as the national organic program should be able to use that to their advantage in their marketing. Ian Rice, CEO of Envirocann, wants to help cannabis companies tap into that potential with what he likes to call, “comparable to organic.”

Ian Rice, CEO of Envirocann & co-founder of SC Labs

Rice co-founded SC Laboratories in 2010, one of the first cannabis testing labs in the world, and helped develop the cannabis industry’s first testing standards. In 2016, Rice and his partners at SC Labs launched Envirocann, a third-party certification organization, focused on the quality assurance and quality control of cannabis products. Through on-site inspections and lab testing, Envirocann verifies and subsequently certifies that best practices are used to grow and process cannabis, while confirming environmental sustainability and regulatory compliance.

“Our backyard in Santa Cruz and the central coast is the birthplace of the organic movement,” says Rice. California Certified Organic Farms (CCOF), founded in Santa Cruz more than 40 years ago, was one of the first organizations in the early 1990s that helped write the national organic program.

“What we came to realize in the lab testing space and as the cannabis market grew, was that a lot of cannabis companies were making the organic claims on their products,” says Rice. “At the time, only one or two organizations in the cannabis space were making an attempt to qualify best practices or create an organic-type feel of confidence among consumers.” What Rice saw in their lab was not cannabis that could be considered organic: “We saw products being labeled as organic, or with certain claims of best practices, that were regularly failing tests and testing positive for banned chemicals. That really didn’t sit well with us.”

Coastal Sun Farms, Enviroganic-certified

At the time, there was no real pathway to certify cannabis products and qualify best practices. “We met with a few people at the CCOF that were very encouraging for us to adopt the national organic program’s standards for cannabis. We followed their lead in how to adopt the standards and apply a certification, building a vehicle intended to certify cannabis producers.”

Because of their background in lab testing they added the requirement for every crop that gets certified to undergo a site inspection, sampling, as well as a pesticide residue test to confirm no pesticides were used at all during the production cycle. One of their clients is Coastal Sun Farms, a greenhouse and outdoor cannabis producer. “They grow incredible products at a high-level, commercial scale at the Enviroganic standard,” says Rice. “They have been able to prove that organic cannabis is economically viable.”

The Envirocann certification goes a bit beyond the USDA’s organic program in helping their clients with downstream supply chain risk management tools (SCRM). “Because of the rigorous testing of products to get certified and go to market, we are getting way ahead of supply chain or production issues,” says Rice. “That includes greater oversight and transparency, not just for marketing the final product.”

A good example of using SCRM to a client’s advantage is in the extraction business. A common scenario recently in the cannabis market involves flower or trim passing the pesticide tests at the lab. But when that flower makes it down the supply chain to a manufacturer, the extraction process concentrates chemical levels along with cannabinoid levels that might have previously been acceptable for flower. “I’ve witnessed millions and millions of dollars evaporate because flower passed, but the concentrated final product did not,” says Rice. “We’ve introduced a tool to get ahead of that decision-making process, looking beyond just a pass/fail. With our partner labs, we look at the chromatograms in greater detail beyond regulatory requirements, which gives us information on trace levels of chemicals we may be looking for. It’s a really rigorous audit on these sites and it’s all for the benefit of our clients.”

Envirocann has also recently added a processing certification for the manufacturing sector and a retail certification for dispensaries. That retail certification is intended to provide consumers with transparency, truth in labeling and legitimate education. The retail certification includes an assessment and audit of their management plan, which goes into details like procurement and budtender education, as well as basic considerations like energy usage and waste management.

While Envirocann has essentially adopted the USDA’s organic program’s set of standards for what qualifies organic producers, which they call “Enviroganic,” they also certify more conventional producers with their “Envirocann” certification. “While these producers might not be considered organic farmers, they use conventional methods of production that are responsible and deserve recognition,” says Rice. “A great example for that tier would be Fog City Farms: They are growing indoor with LED lighting and have multiple levels in their indoor environment to optimize efficiency and minimize their impact with waste and energy usage, including overall considerations for sustainability in their business.”

Looking to the future, Ian Rice is using the term “comparable to organic” very intentionally, preparing for California’s roll out of their own organic cannabis program. The California Department of Food and Agriculture (CDFA) is launching the “OCal Comparable-to-Organic Cannabis Program.” Envirocann is obviously using the same language as the CDFA. That’s because Envirocann aims to be one of the verifying agents under the CDFA’s new program. That program will begin on January 1, 2021.