Tag Archives: quality control

Implementing Real Science in Cultivation and Extraction

By Aaron G. Biros
No Comments

Formed in 2015, Outco is a vertically integrated, licensed producer of medical cannabis in Southern California. Outco manages Outliers Collective, the first licensed dispensary continually operating in San Diego County. They operate the first licensed cultivation on Native American land in Southern California, the first cultivation building permit in Southern California and the first licensed extraction facility in San Diego County. Outco is on track to be the largest licensed producer of medical cannabis in Southern California.

Lincoln Fish, co-founder and chief executive officer of Outco
Lincoln Fish, co-founder and chief executive officer of Outco

The company prides themselves on attention to detail; the well versed team implements real science in their cultivation and extraction processes. Lincoln Fish, co-founder and chief executive officer of Outco, has more than 30 years of experience as an entrepreneur. Before entering the cannabis industry, Linc started and sold companies in the healthcare technology and nutraceutical spaces.

With construction underway at new facilities, Outco is anticipating an expanding market and higher demand.
With construction underway at new facilities, Outco is anticipating an expanding market and higher demand.

Fish’s experience with FDA regulations in nutraceuticals prepared him for running a business in such a tumultuous, highly regulated environment like cannabis. “One thing I took from the nutraceutical industry is how to present products to consumers and letting them know it is safe, effective and consistent,” says Fish. He says he noticed a serious lack of consistency in products. They tested 25 different vape cartridges, with their own oil, to find a consistent product they can use and know that consumers will safely and consistently get the same results. “There is a lot of room for more professionals and a lot of room for more science,” says Fish. “We try to position ourselves in a way that is consistent with where we think policy will go so we are very careful with recommendations from a scientific standpoint, patient information and product safety.”

Starting at a seed or cutting, plants are grown with the protection of biological control agents
Starting at a seed or cutting, plants are grown with the protection of biological control agents

According to Fish, they currently distribute cannabis products to about 75 licensed dispensaries in Orange County, San Diego and Los Angeles. With construction underway at their cultivation facility on Native American land, Fish says they plan to generate roughly 2600 pounds of cannabis each month. Gearing up for that in addition to the expanding recreational market requires some planning in advance, says Fish. Part of that plan is making sure quality controls are in place to keep consistency in the product quality and dosage. They are also actively seeking to open their distribution channels further.

One of the cultivation facilities at Outco
One of the cultivation facilities at Outco

“We are building out a full lab of our own in addition to third party testing to perform internal quality controls,” says Fish. Equipped with their own laboratory instrumentation like HPLC and GC, they hope to establish proper in-house quality controls as well as provide that resource to younger startup companies. As one of the founding partners of Canopy San Diego, an ancillary startup accelerator, Fish sees great potential in working with younger companies to get them off the ground. Fish met Outco’s vice president of extraction, Dr. Markus Roggen, at a Canopy San Diego event. It was there that they had the idea to build a startup accelerator for companies that actually touch the plant- extractors, cultivators and infused-product manufacturers, as opposed to a startup accelerator that would only help ancillary businesses.

Dr. Markus Roggen, vice president of extraction
Dr. Markus Roggen, vice president of extraction

Dr. Roggen, who is an organic chemist by training, heads up Outco’s supercritical CO2 extraction operation. “I came to the ‘art’ of cannabis extraction with an open, yet scientifically focused mind,” says Dr. Roggen. “My approach was to look past the myths and stories about extraction methods and focus on finding data, as there really wasn’t much available. I therefore, from the beginning, started to study the capabilities of our extraction equipment by chemometric methods.” Chemometrics is the science of relating measurements made on a chemical system or process to the state of the system via applications of mathematical methods. “Already the first sets of experiments showed that long-held beliefs in the cannabis community were inaccurate,” says Dr. Roggen. “For example the particle size of extracted material matters. Or that it is possible to preserve and even isolate terpenes by CO2 extraction methods.” With plans to have a full plant and analytical chemistry laboratory on site, they hope to perform more research that focuses on optimizing extraction processes.

Plant irrigation and fertigation procedures are determined via experimentation
Plant irrigation and fertigation procedures are determined via experimentation

Dr. Allison Justice leads their cultivation team with a background in greenhouse management and commercial horticulture. Dr. Justice says plants are grown, starting at a young age (seed or vegetative cutting), with the protection of biological control agents. “Biological control is a management strategy that entails the release of beneficial insects or fungi, such as parasitoids and predators, in order to suppress or regulate insect populations in greenhouses and grow rooms,” says Dr. Justice.

Dr. Allison Justice, vice president of cultivation
Dr. Allison Justice, vice president of cultivation

When implemented properly, this eliminates the need to use synthetic pesticides. “Biological control agents are not put in place to eradicate pest populations yet are applied as preventives to minimize plant damage and maintain their own populations.” They are constantly evaluating light types, spectrum and intensity to determine optimal ranges, according to Dr. Justice. They don’t use any pre-mixed “cannabis” nutrient supplements for their plants, instead they design an experiment to determine the desired levels and ratios of essential plant nutrients. “We have found it crucial to determine what ratios of nutrients the plant actually needs and by knowing this, we know how to manipulate the recipe determined by the plant’s given nutritional symptoms,” says Dr. Justice. Every type of adjustment in cultivation and extraction is based on results from experimentation rooted in legitimate science. Instead of guessing when it might be time to harvest, they use a water activity meter, logging and recording all the data to determine the appropriate time to trim and cure plants. Performing analytical testing at every step is key, says Fish.

Looking toward the recreational market, Fish sees an obvious opportunity to expand their wholesale operations substantially, with several larger new cultivation projects planned. “The key though is to produce flower and concentrate offerings with the same standards we employ for medical cannabis,” says Fish.

Q&A with Dan Anglin: Cannabis Safety is an American Duty

By Aaron G. Biros
No Comments

Dan Anglin, a Marine Corps veteran and chairman of the Colorado Cannabis Chamber of Commerce, is the founder and chief executive officer of Americanna, an infused products business in Colorado with a heavy focus on regulatory compliance, consistent dosing and product safety. The company was the very first to implement the THC stamp, a requirement for all infused products in Colorado this coming October 1st.

dananglin
Dan Anglin, founder & CEO of Americanna

As a veteran of Operation Desert Storm, Anglin began his career as a legislative analyst in Arizona, and then moved to Colorado where he worked for the Colorado Legislative Council. Soon after, he became a lobbyist for the Colorado Association of Commerce and Industry. With a focus on health policy, he became the primary lobbyist for anything related to healthcare at the state level.

After running his own lobbying firm, he was hired by EdiPure, which was at the time the largest infused product manufacturer, to lobby against an amendment in the state legislature that would have all but shut down the infused products industry. Within six months, he was made a partner and co-owner of EdiPure for almost three years where he focused on regulatory compliance and legislative matters. In April of 2015, Anglin left EdiPure to buy Boulder Pharma with Frank Falconer, rebranding the company as Americanna making primarily edible products.AMERICANNA_LOGO_Vintage_FINAL

According to him, over the past few years, public opinion has grown in favor of differentiating cannabis products from other food products beyond just the packaging. Anglin said he saw this coming and embraced it as a core concept of his business model. Americanna produces gummies in the shape of a cannabis leaf with the THC stamp on each individual gummy. “This is a matter of public safety that you can clearly tell it is a cannabis product by its shape and symbol,” says Anglin. “We should be proud of cannabis products as an expression of American liberty, it is our duty not to hide it in an unrecognizable food product, but celebrate it with a clear shape and stamp, providing for consumer safety.” In this Q&A, we sit down with Dan Anglin to learn about his quality and safety controls, manufacturing processes and why his business embodies American freedom.

CannabisIndustryJournal: How do you see what you are doing as exercising your American liberties?

Dan Anglin: I served my country and protected the rights of Americans overseas. Because the people of Colorado have chosen this [adult use cannabis legalization] to be a right expressed in the state constitution, I feel that every day our 38 employees come to work and make cannabis products, we are exercising our rights as citizens of Colorado and of the United States.

AmericannaTeam
The Americanna Team

The adult use side of the cannabis industry is a true expression of liberty in choice. This is what freedom is all about! In the past five years, the United States has given more and more groups of people more freedoms and liberties; this is another group of people that believe they deserve rights, in this case the liberty to consume cannabis freely.

This is an issue of states’ rights too. The people of Colorado voted to make the adult use of cannabis a right in their state constitution. We are abiding by the Cole Memo by doing everything we can to protect public safety. There is still a long way to go, but the fact that my employees and I are paying taxes and selling this in a regulated environment is absolutely an expression of our American liberty.

CIJ: Walk us through some of your quality controls in manufacturing infused products.

Dan: We have a contract manufacturer with a white label agreement, so our food products are of the same quality as any food product you would find in major retailers. Quality controls begin as soon as we unpack the food product, making sure it has been stored at the right temperature with all of the right conditions. We toss any products that do not meet our quality standards. Post-infusion, we go into packaging and separate them into flavors. As packagers are putting them into the child resistant packaging as required by law, they are doing QC checks on every single gummy.

americana dummiesThe most important part of our quality control system is the testing for potency, homogeneity and microbial contamination. Post-harvest, the cannabis is tested and after it is extracted, the product is tested again but this time also for residual solvents. Once we infuse the product, we test it again. This is so important because making any type of food product requires doing everything you can to prevent bacterial contamination.

CIJ: How do you view cannabis safety as your responsibility?

Dan: Frank and I developed the business based on compliance and consistency. We already comply with rules expected to be enforced six months from now. We want consumers to be able to count on the consistency of the dosing in our products. Our semi-automated process of infusion can precisely dose every single product to ten milligrams. It is an infusion that soaks through the product, not a spray, and is one of the most homogenous products available.

Because we are creating food products, we have the same responsibility as any other food producer. When you make something that people ingest, it is your responsibility to follow health codes that provide guidelines for food handling. Every one of my employees is ServSafe certified. We are treating cannabis as an ingredient in a food product. Food safety is paramount and should be at the top of every infused product manufacturer’s mind.

derekpeterson

Terra Tech Expands, Maintains Quality: A Q&A with CEO Derek Peterson

By Aaron G. Biros
No Comments
derekpeterson
derekpeterson
Derek Peterson, chief executive officer of Terra Tech

Terra Tech, with the recent acquisition of Blum, a dispensary in Oakland, and the line of concentrates, IVXX, is sweeping the cannabis industry by setting standards for safety and quality. Terra Tech, publicly traded in the Over-The-Counter market, is well known as an agricultural company, with the subsidiary brand, Edible Garden, selling produce to Whole Foods, Wal-Mart and Kroger’s. In December of last year, we covered Terra Tech’s entrance into the cannabis marketplace and their experience with large-scale, sustainable agriculture. We sit down with Derek Peterson, chief executive officer of Terra Tech, to get an update on their progress and quality controls.

CannabisIndustryJournal: In January, Terra Tech announced revenue guidance of $20-22 million for 2016. Can you share some of your strategy going forward to meet your goals?

rsz_img_2343
Terra Tech is taking organic and GFSI-certified agricultural practices to growing cannabis

Derek Peterson: We have always played both a long game as well as a short game, meaning while we are building our longer term business, like in Nevada, we are also focusing on short term accretive acquisitions, like we did with Blum in Oakland. We want to make sure we capture short-term revenue growth while we plan our future revenue production. We feel confident about achieving those results.

CIJ: How big of a role does the acquisition of Blum and IVXX brand expansion play in meeting those goals?

Blumoakland
The Oakland location of Blum dispensary

Derek: Blum is a significant factor even though we are only capturing three quarters of revenue considering we closed the deal on March 31st of this year. So for the full year of 2017 we will have growth from this level considering we will be able to report a full year of Blum revenue. IVXX presents us with the best opportunity for growth in the coming years. As the market in California and Nevada grows we can continue to expand our IVXX footprint throughout the state. Being able to wholesale to thousands of other retail facilities affords us a significant opportunity to grow our sales.

CIJ: How do you think the brand of Edible Garden positions you well for expansion in the cannabis industry? 

Poinsettias ready for distribution at Edible Garden facility in Belvidere, New Jersey
Produce ready for distribution at Edible Garden facility in Belvidere, New Jersey

Derek: One of the reasons we were so successful in the Nevada market was because regulators and legislators felt a high degree of confidence in our abilities considering we are USDA organic, Kosher and GFSI-certified. Our traditional agricultural experience has been very synergistic with our cannabis division from both an optics and operational perspective.

CIJ: Could you give us an update on progress in Medifarm LLC in Nevada? And on your distribution plan for IVXX in California?

IVXXconcentrates
IVXX concentrates

Derek: We are continuing to expand our IVXX line throughout the state and increasing our sales force. In addition we will continue to develop new products to distribute into our existing supply chain, like we just did with our new pre filled cartridge line.

We are opening our Decatur location in Las Vegas in early July and Reno and Desert Inn towards the end of August. Our cultivation and extraction facilities should be complete no later than January 2017. We will have our entire infrastructure in place if the recreational bill passes in Nevada this November.

Blum Las Vegas location will open in July
Blum Las Vegas location will open in July

CIJ: Tell us about the role of laboratory testing in your business.

Derek: Laboratories play a significant role, as they are becoming a mandated step in most new legislation around the company. Independent lab testing is extremely important to maintain safe access for consumers and patients. We work primarily with Steep Hill Labs and CW analytics.

CIJ: Can you expand on your integrated pest management and your growing practices?

stickerscannabis
Platinum Cookies ready for packaging and labelling

Derek: Well we cannot say organic, however we do cultivate all naturally. We also cultivate traditional produce that we sell to major retailers. We are USDA organic-certified and we implement similar processes in our cannabis cultivation. Pest control is extremely challenging for any farmer but we rely primarily on bio control, meaning the good bugs eat the bad bugs. This has been very effective for us in the cultivation of all our products.

CIJ: How is your business different from the slew of other dispensaries and growers in California?

Consistency in quality standards requires meticulous SOPs
Consistency in quality standards requires meticulous SOPs

Derek: Service and consistency; we have over 42,000 registered patients and our operations team has over 19 years of experience in California. One of the reasons we have become one of the largest dispensaries in the state is because of that experience. In addition, consistency is extremely important. Consumers expect the same product in every other business and ours is no different. If they come in for our Platinum Cookies one month and the next month it has different characteristics you are going to lose patient confidence. So in the front of the house, we are focused on pairing patients’ needs with the correct product and in the back of the house we are focused on providing a meticulously cultivated product, produced at the highest standards.

CIJ: Can you delve into some of the processing for concentrates? How do you meet such rigorous quality standards?

IVXX processing
Extraction equipment in one of the processing facilities for IVXX

Derek: Through research and development, we have engineered a proprietary process in which our solvent profiles used under our proprietary conditions ensures solvent residual levels which are not detected by instrumentation at 3rd party testing agencies such as Steep Hill Labs. In addition, any good scientific method requires repetition and corroboration of results. In order to accomplish this we also rely on random routine testing in which we send out extracts out to other 3rd party testing labs. Proprietary conditions include, but are not limited to, heat, vacuum, agitation, etc. By utilizing the correct amalgamation of solvent profiles, extraction conditions, purging conditions, as well as rigorous quality control standards, we are able to ensure a product that is void of any residual solvents, without sacrificing potency or identity of the cannabinoids and terpenes. Cannabinoids and terpenes are of chief interest when extracting cannabis for patients so that they have access to these essential oils without any of the actual leaf and bud.

All solvents used are the highest grade available to us, which ensures a truly medical product for the patient. In addition, all of our extraction equipment is routinely cleaned and sterilized using medical grade cleaning agents.

OGanalytical instruments.

New Cannabis Lab Rules In Oregon Aim to Curb Fraud

By Aaron G. Biros
No Comments
OGanalytical instruments.

The Oregon Health Authority (OHA) recently implemented a set of temporary rules effective through June 28th of this year with the goal to establish a set of regulations for cannabis testing by October 1st. An investigation by The Oregonian highlighted some of the previous problems with cannabis testing in the state.

The most impactful rule changes include The NELAC Institute (TNI) mandatory standards for laboratories that the Oregon Environmental Laboratory Accreditation Program (ORELAP) will use to accredit labs. Initial rules in the Oregon medical cannabis program, HB 3460 from 2013, did not specify accreditation rules for cannabis testing.

oganalyticalworkstation
The OG Analytical laboratory in Eugene, Oregon is working to comply with new regulations, including new sample collection rules

ORELAP currently performs accreditation for lab testing under the Clean Air Act, Clean Water Act, Resource Conservation and Recovery Act and the Safe Drinking Water Act. The new cannabis testing rules will give ORELAP the authority to accredit and regulate cannabis labs in the state of Oregon.

Rodger Voelker, Ph.D., laboratory director of OG Analytical in Eugene, OR, believes these rules are monumental in establishing legitimacy in cannabis testing. “These new rules have major repercussions mainly because they require not only getting accreditation, but maintaining it with very strict requirements,” says Voelker. “That also includes procedural guidelines that very carefully outline the quality of laboratory practices and establishes a set of criteria for method validation.”

Roger Voelker
Rodger Voelker, lab director at OG Analytical laboratory

Voelker notes that two of the biggest changes are in quality control and data management. “The documentation they require is very thorough and strict with the idea that any aspect of an analysis can be replicated,” adds Voelker. “This is a real win for us in my opinion because now we have an agency that can issue the appropriate credentials as well as have the authority to make punitive measures.”

The timeline for implementation with temporary rules allows state regulators to work with laboratories to perform accreditation and bring laboratories up to speed. According to Shannon Swantek, ORELAP compliance specialist, products that dispensaries sell in medical and recreational markets are required to be tested under the new rules and in the analyte lists by an ORELAP accredited laboratory, starting on October 1st.

Swantek’s job is to accredit cannabis labs to the TNI standards, which is essentially very similar to ISO 17025, just with more prescriptive measures and the ability to pair with state agencies to enforce rules after accreditation. “The timeline for accreditation is dependent on how ready the lab is and how compliant they are to the TNI standard already,” says Swantek. “The culture had gotten so fraudulent that the legislature felt Oregon needed some serious, more strict rules in place.”

OGanalytical instruments.
Labs need very expensive instruments to perform all of the testing required by OHA

One of the biggest changes coming to Oregon cannabis testing is the new sampling requirement. “An accredited laboratory employee must take the sample because sampling is where a lack of training or outright fraud is skewing results, which occurs when a grower brings in a sample not representative of the batch,” adds Swantek. Sample preparation methods will also be required to be more robust to meet the action limits of pesticide testing in particular, helping to identify lower levels like parts-per-billion, according to Swantek.

Reports were also lacking key information in the past. The new rules will require more information such as the procedure used, the analyst carrying it out, dilution factors and any other information you need to theoretically reproduce the result. This will result in more accurate labels on products.

Many are concerned that the new lab testing requirements will raise the price of testing too much. In reality, those current prices are not realistic for accurate data, which points to the rampant fraud that ORELAP is trying to eradicate. “The old rules were written in such an ambiguous way that the prices were set by laboratories without a proper quality program or even without proper instrumentation,” says Swantek.

oganalyticalsign
OG Analytical had to close its doors briefly to meet accreditation

The accreditation process will require particularly robust quality control systems in labs. “Accreditation to the TNI Standard means that lab quality systems will require a documentation system, training procedures, record keeping, personnel requirements, organization details, proof of no conflicts of interest and corrective actions if noncompliant,” adds Swantek. “We single out each method or procedure, look at their raw data and proficiency testing and determine if they are meeting the technical requirements.”

According to Voelker, other industries have learned to adjust their costs with stringent lab testing rules. “I get that no one wants to pay more for lab testing, but the reality is that joining the world of commodities comes with additional costs to ensure consumer safety,” says Voelker. These rule changes will undoubtedly bring more consistency to Oregon’s cannabis industry with accurate lab testing and help the OHA shed more light on issues surrounding consumer safety.

RFID tags on drying marijuana flowers

Marijuana Edibles: Update on a Rapidly Developing Market

By Aaron G. Biros
No Comments
RFID tags on drying marijuana flowers

A lot has changed since last year’s article, “Marijuana Edibles: A Regulatory Nightmare.” Marijuana has since catapulted into mainstream thinking via activism, state decriminalization, and medical reforms while investors and banks are beginning to trust the market more, further legitimizing the nascent industry. According to an article from the Washington Post, Colorado’s legal marijuana industry reached $700 million in 2014 and is expected to grow to $1 billion by 2016. 

Innovators are beginning to analyze trends on a national level, looking toward federal rescheduling of the drug as a catalyst for more state reforms and wider legalization measures. Federal legalization is in the back of many minds, as the introduction of pivotal state and federal legislative reforms promises more access to banking services, medical research, and more state independence. 

While a black market mentality remains prevalent, widespread state reforms, increased venture capital investment, and further legitimization of an industry with less barriers of entry have fostered a perceived reduction in risk. States like Oregon, Washington, and Colorado that have already legalized marijuana for recreational and medical sales are beginning to implement strict packaging rules, requirements for traceability, QA programs, testing and laboratory monitoring requirements, and other regulations that would suggest FDA oversight down the road. 

marijuana buds drying in racks biotrackthc
Dried marijuana buds curing with RFID tags as part of the traceability system of BiotrackTHC

State regulatory bodies such as the Colorado Marijuana Enforcement Division (MED) have matured and expanded their oversight to include certifications and requirements for lab testing and analysis. Marijuana testing facilities can now be certified by the MED to test for residual solvents, poisons or toxins, harmful chemicals, dangerous molds, mildew or filth, harmful microbials such as E. coli or Salmonella, pesticides, and THC levels and Cannabinoid potency. 

According to an article from theCannabist.com, edible marijuana took 45% of the market share in 2014 and continues to grow, proving that food manufacturers and processors will gain a bigger share of the market. 

BioTrackTHC develops a seed-to-sale traceability system that is the state-mandated reporting system used by any business that touches the plant in compliance with Washington’s i502 regulations (The company also won the contract bid for New Mexico’s and New York’s state-run traceability systems). “From day one, all retail products under i502, including infused edibles, must have laboratory-submitted passing test results and data in the traceability system before it can be unlocked for shipment to retailers,” says Patrick Vo, CEO of BioTrackTHC.  

RFID tags on drying marijuana flowers
RFID tags on drying marijuana flowers, from BioTrackTHC

Regulations, especially those addressing traceability, are crucial for advancing the industry and fighting the black market, performing recalls, and improving product quality and safety. Vo adds, “As more states adopt a centralized traceability system, food safety will improve as we see the industry grow.”

“Most of the marijuana edibles producers we advise are working comfortably within their state health department regulations versus a year ago when they were struggling to implement routine compliance,” says Stephen Goldner, CEO of Regulatory Affairs Associates.  “But there is a long way to go to make this new marketplace meet the standards routinely met by US food producers in other markets such as nutritional supplements and medical foods.”

Many edible producers are sadly mistaken to ignore FDA labeling and production regulations just because the producer only ships within their own state, according to Goldner. “Whenever FDA has found label or food safety violations of products, whether they are food, drugs or any other product, it has always acted quickly to seize the product, inspect the producer and insist that violative labeling or production practices be remedied,” he says, adding that it won’t be surprising to see FDA start to “seize marijuana-infused food products that make drug claims, especially from the leading current producers” as a way for the agency to insert itself into the inspection and compliance process. “These companies need to have FDA food GMP’s solidly in place and properly documented,” says Goldner.

 “Those who have experienced the most consistent and long term success in this industry are those who play above board, those who take the extra effort and make the investment in effort, time, and money to treat their business as if it was already federally legal and had to adhere to standards that other industries must follow,” says Vo. He agrees with the view held by many that long term planning is vital in this industry. “Those who have implemented best practices, QA programs, and traceability software will succeed in the long run, and the bad actors will eventually, by their own poor practices, be filtered out by regulatory and market forces.”

In the near future, the industry will look to other states in regulatory experiments on opposite sides of the spectrum. “New York, which legalized medical marijuana in 2014, is handing out 5 licenses to operate 4 dispensaries each, and allowing licensees to have a grow facility to supply their respective dispensaries. The Commissioner of the New York State Department of Health will have authority on licensing, testing, and medical requirements for patients seeking treatment with medical marijuana,” says R. David Marquez, who operates a Long Island law firm focusing on the cannabis industry.

New York is implementing very strict rules regarding cultivating and processing the plant. California, on the other side of the spectrum, already operates a somewhat loosely regulated medical marijuana market and has been doing so since 1996. The bill to legalize marijuana recreationally in the state is widely expected to pass vote and be implemented in 2016. This would open up an enormous market potential and contribute to the growth of the industry on a national level. 

Because marijuana edibles are theoretically both a food and a drug, it is only appropriate that the FDA should look to regulate the industry in the future. In the meantime “Those who have invested the time and money in staying compliant now will be far ahead of the game tomorrow,” says Patrick Vo, who is looking toward federal legalization.

It seems that manufacturers and processors at the forefront of quality and safety testing will succeed in the long run. 

Footnote: This is a regulatory update on the cannabis industry with an emphasis on edible marijuana. CannabisIndustryJournal.com, the newest publication, will be launched in September of this year. CannabisIndustryJournal.com will educate the marketplace covering news, technology, business trends, safety, quality, and the regulatory environment, aiding in the advancement of an informed and safe market for the global cannabis industry. Stay tuned for more!