Opiate abuse is a far-reaching international public health issue, impacting tens of thousands of people every year in the United States alone. As the epidemic continues to spread, the medical community is faced with the immense task of researching and developing safer, non-addictive treatment alternatives for patients of chronic pain and other ailments. The controversial and oft-debated notion of cannabis as an opiate alternative has become increasingly well-researched and gained considerable credibility in recent years. The new challenge lies in advancing the cannabis industry to the point of being a legitimate medicine that can be prescribed and administered by doctors.
Opioids are among the most commonly prescribed medical treatments for severe chronic pain, yet prescription opioid overdoses killed more than 165,000 Americans between 1999 and 2014 according to the Department of Health and Human Services. In fact, the health and social costs of opioids are estimated to be as much as $55 billion a year. As such, it has become more imperative than ever that mainstream medical practitioners take notice of the cannabis plant’s powerful healing properties and shift away from potentially harmful pharmaceutical medications.
Dr. Richard Kaufman, co-founder and chief science officer of Nanosphere Health Sciences.
The evidence of cannabis’ safety and efficacy is well established. For instance, in a literature review of 38 studies evaluating medical cannabis’ efficacy for treating pain, 71 percent concluded that cannabinoids had empirically demonstrable and statistically significant pain-relieving effects. In addition, a 2015 meta-analysis of 79 studies found a 30 percent or greater reduction of pain with the use of cannabinoids compared to placebos. Further, an analysis of a decade of randomized, double-blind placebo-controlled clinical trials on cannabis for treating pain concluded that cannabis should be a first line treatment for patients with painful neuropathy and other serious and debilitating symptoms, who often do not respond to other available medications.
Not only is cannabis demonstrably safe and effective, but numerous studies also present compelling evidence that the prescription of opiates has dropped sharply in U.S. states and countries that have legalized medical cannabis. For example, a study in the Clinical Journal of Pain followed 176 chronic pain patients in Israel over seven months. Researchers found that 44 percent of participants stopped taking prescription opioids within seven months after starting medical cannabis. Patients cited the following reasons for using cannabis instead of pharmaceutical drugs: 65 percent reported less adverse side effects, 57 percent cited better symptom management and 34 percent found that cannabis had less withdrawal potential than their other medications.The evidence of cannabis’ safety and efficacy is well established.
The tide is quickly turning as many respected doctors are beginning to advocate for the tremendous medical potential of cannabis as a replacement for prescription pills. That said, if the cannabis industry is to help solve the crisis inflicted by modern pharmaceutical painkillers, we must develop next-generation scientifically formulated products and advocate to improve their accessibility.
Inhalation and oral methods of cannabis consumption have no reliable dosage as medicine, rendering them unfit for administration by health professionals. These mainstream consumption methods also have extremely low bioavailability and bioactivity. Bioavailability for ingested cannabis products is only 6 percent and for inhalation methods can be as low as 2 percent. Oral absorption of THC is slow and unpredictable, with peak blood concentration occurring 1–5 hours post dose. Similarly, inhalation methods can take up to two hours to have any effect. The next phase of the medical cannabis industry must focus on fixing problems that prevent cannabis from being a universally recognized health tool. Fortunately, scientists are making major advancements in cannabis delivery technologies, offering novel and innovative administration methods that have proven both effective and reliable.
With products like Evolve’s NanoSerum™ representing a promising solution to help reduce the morbidity and mortality associated with prescription opioid use and abuse, meaningful progress is already underway. It’s been a long and challenging road to arrive at this point, but our efforts are only just beginning. Achieving long-term change on a national and international scale will require professionals from all levels of the cannabis, science and medical communities to push for advanced product offerings that provide consistent, standardized dosing in healthier, smokeless modes of delivery.
Last week, Curaleaf, a medical cannabis producer and processor in Miami, Florida, announced they have earned the Safe Quality Food (SQF) Level II certification. In the press release, they claim they are the first and only medical cannabis company in the state to achieve that certification.
That SQF certification is a program recognized by the Global Food Safety Initiative (GFSI), which is a global collaborative effort to get food companies practicing food safety management on the same high quality standards around the world. GFSI is a major international food quality and safety program where some of the largest food manufacturers and processors in the world participate.
The processing area at Curaleaf Florida headquarters
Curaleaf’s products include a line of low-THC and full strength medical cannabis products. They have dispensaries in Miami, Lake Worth, Fort Myers and St. Petersburg, as well as delivery of products from Jacksonville south to Key West.
According to Lindsay Jones, president of Curaleaf Florida, patients ask frequently about the level of safety of cannabis products. “Every day patients express interest and assurance of wanting to know that the foods and medicines they consume are safe and of the best quality available,” says Jones. “This SQF Level II certification that Curaleaf has earned is particularly important for patients and demonstrates that our medical marijuana processing expertise delivers superior quality products for patients in need across Florida.”
Florida’s regulations on medical cannabis producers and processors actually require a form of certification demonstrating proper food safety protocols. “Within 12 months after licensure, a medical marijuana treatment center must demonstrate to the department that all of its processing facilities have passed a Food Safety Good Manufacturing Practices, such as Global Food Safety Initiative or equivalent, inspection by a nationally accredited certifying body,” reads Rule 9 in the 2017 Florida Statute. Edibles producers in Florida “must hold a permit to operate as a food establishment pursuant to chapter 500, the Florida Food Safety Act, and must comply with all the requirements for food establishments pursuant to chapter 500 and any rules adopted thereunder.” The rules also lay out requirements for packaging, dosage and sanitation rules for storage, display and dispensing of edible products.
Looking at SQF Level II certification and GFSI could be a step in the right direction for many cannabis infused product manufacturers, as they are some of the more recognized programs in the food industry.
Last month, the Cannabis Control Commission, the regulatory body overseeing Massachusetts’ newest industry, finalized their regulations for the market. At the beginning of this month, the state began accepting applications for business licenses. Now with the full implementation of adult-use sales on the horizon, businesses, regulators, consumers and local governments are preparing themselves for the legalization of adult-use cannabis. Sales are expected to begin June 1st.
On March 29th, the Cannabis Control Commission announced their finalized rules were filed, published and took effect. Leading up to the filing, the Commission reports they held 10 listening sessions, received roughly 500 public comments and conducted 7 hearings for roughly 150 policy decisions. The license categories that businesses can apply for include cultivator, craft marijuana cooperative, microbusiness, product manufacturer, independent testing laboratory, storefront retailer, third-party transporter, existing licensee transporter, and research facility, according to the press release.
What separates Massachusetts’ rules from other states’ rules are a few of the license categories as well as environmental regulations, as Kris Kane highlights in this Forbes article. Experimental policies, like the microbusiness and craft marijuana co-op licenses, Kane says, are some tactics the Commission hopes may help those affected by the drug war and those who don’t have the capital and funding required for the larger license types.This is a groundbreaking reform previously unseen in states that have legalized cannabis.
The Commission will also establish a Social Equity Program, as outlined in the final rules (section 17 of 500.105). That program is designed to help those who have been arrested of a cannabis-related crime previously or lived in a neighborhood adversely affected by the drug war. “The committee makes specific recommendations as to the use of community reinvestment funds in the areas of programming, restorative justice, jail diversion, workforce development, industry-specific technical assistance, and mentoring services, in areas of disproportionate impact,” reads one excerpt from the rules (section 500.002) identifying the need for a Citizen Review Committee, which advises on the implementation of that Social Equity Program.
This is a groundbreaking reform previously unseen in states that have legalized cannabis. Massachusetts may very well be the first state to actively help victims of the prohibition of cannabis.Some municipalities are hesitant and skeptical, while others are fully embracing the new industry with open arms.
For environmental rules, Kane notes the Commission is taking unprecedented steps to address energy usage in the cultivation process, pushing the industry to think about environmental sustainability in their bottom line and as part of their routine regulatory compliance. He says the Commission mandates a 36 watts-per-square-foot maximum for indoor cannabis cultivators.
On Monday, April 2nd the state began accepting applications for businesses seeking licensure. Within a few days, nearly 200 businesses have applied. That number is expected to grow significantly over the next few weeks.
While businesses continue applying for licenses, local governments are preparing in their own way. Some municipalities are hesitant and skeptical, while others are fully embracing the new industry with open arms.
A couple weeks ago, the City Council of Springfield, Massachusetts passed a six-month moratorium on cannabis sales, citing the need for more time to draft local regulations for businesses first. “I believe the moratorium is in place to make sure that we get it right the first time,” Councilor Adam Gomez, chairman of the council’s Economic Development Committee told MassLive. “We don’t have a chance to get it right the second time. The residents of Springfield supported this.” There are also talks of a potential temporary ban in Truro, MA.
Meanwhile in the city of Attleboro, ABC6 News reports Mayor Paul Heroux is “working to make his city marijuana friendly as city councilors work to draft regulation ordinances.” In Peabody, two businesses just received approval to begin operating as medical dispensaries.
According to the Marijuana Policy Project (MPP), the Department of Health approved changes to the program at a hearing on Monday, which were recommended by the Advisory Board last week. While smoking remains theoretically prohibited, patients can now access the flower for vaporization.
The medical cannabis program in Pennsylvania has only been functional for a few months now; patients began getting access to the drug back in February of 2018. In a press release, MPP says only a small number of cultivators and dispensaries are currently operating. This fact, coupled with the need to purchase processed forms of cannabis, has created product shortages and costly medicine for patients.
It is expected that this move could help alleviate some of those problems in the state’s new program. “Allowing cannabis in its natural, flower form and expanding the list of qualifying conditions will have a huge positive impact on seriously ill Pennsylvanians,” says Becky Dansky, legislative counsel for the Marijuana Policy Project, who helped lead the legalization effort in Pennsylvania’s legislature. “By being able to provide medical marijuana in plant form, producers will be able to get medicine into the hands of patients much more quickly and for much lower cost to patients,” says Dansky. “This is vitally important for patient access right now while the program is still getting off the ground and production is not yet at full capacity. We hope these rules are promulgated as quickly as possible so even more patients will be able to find relief.”
The qualifying conditions added to the list for patients seeking medical cannabis is set to include cancer remission therapy as well as opioid-addiction therapy, which are two very notable additions. With more qualifying conditions and a potentially cheaper form of medicine, these changes could improve the program’s efficacy in treating patients.
California’s regulated adult use cannabis market has been up and running for around four months now and rumors of a potential supply bottleneck on the horizon are beginning to circulate. There are a number of factors that could have an impact on the cannabis supply in the market, most of which stem from changes in the distribution channels now that the state is implementing new regulations.
Those include a slow rollout in licensing cannabis businesses, new testing requirements, the supply carryover period prior to January 1stas well as new labeling and packaging regulations. In this piece, we are going to examine some of those rumors, see if there might be some truth to them and provide some guidance for what businesses can do to prepare for this.
A Slow Start to Licensing
This one is perhaps the most obvious factor to impact the supply chain in California. Much of the delays in licensing cannabis businesses came from the issue of local control, where businesses needed to get approval from their municipality before getting a state license. In the first month of the new market, it took Los Angeles weeks longer than other counties to begin licensing dispensaries. Whereas San Diego retailers saw a massive influx of customers right away, forcing them to buy up product to meet the high demand. Smaller producers also had trouble getting licenses as quickly as some of the larger ones.
Basically it all boils down to a slow start for the new market, according to Diane Czarkowski, co-founder of Canna Advisors. “The state is requiring businesses to get their local licenses before they can get their state license and that will create a delay in operators being able to bring products to market,” says Czarkowski. She says this is pretty typical of new markets, or when a market experiences dramatic changes quickly. “It could be a brand-new market, like in Hawaii, where the operators were ready with product, but there were no labs to test the products, which caused delays.” In addition to the licensing roll out being slow to start, the temporary licenses initially awarded to businesses are set to expire soon, by the end of April.
Stricter Rules to Come
The same logic goes for the testing regulations. New testing and labeling requirements, according to the Bureau of Cannabis Control regulating the market, will be phased in throughout 2018.
California’s plan for phasing in testing requirements.
The state has already phased in cannabinoids, moisture content, residual solvent, pesticide, microbial impurities and homogeneity testing to some extent. On July 1st, the state will add additional residual solvent and pesticide testing as well as foreign material testing. At the end of 2018, they plan on requiring terpenoids, mycotoxins, heavy metals and water activity testing. All of those tests cost money and all of those tests could impact suppliers’ ability to bring product to market. “Oftentimes regulations require different types of testing to be done to products without recognizing that adequately completing those tests requires different methods, equipment, and standards,” says Czarkowski. “Most labs do not have all of the necessary components, and they are very costly. Producers could wait weeks to get test results back before they know if they can sell their products.”
Back when we spoke with Josh Drayton, deputy director of the California Cannabis Industry Association, about the upcoming changes to the California market, he voiced his concerns with the coming testing rules. “A lot of testing labs are concerned they are unable to test at the state’s threshold for some of these contaminants and pesticides; the detection limits seem very low,” says Drayton. “The testing portion will take years to work out, I am sure we will remove and add different pesticides and contaminants to the list.” California’s testing industry is, however, capable of adapting to changing rules, as they’ve done in the past on more than one occasion. It should be noted that many labs in the state are on the cutting edge of testing cannabis, working with The Bureau to implement the new rules.
Roy Bingham, CEO of BDS Analytics
Cannabis products made prior to December 31st, 2017, did not need to comply with the stricter testing rules that are coming in the next few months. This carryover period allowed dispensaries to have products on the shelves when the new market launched in the beginning of 2018. Retailers knew this rule meant they needed to stockpile product in the event of a supply bottleneck, and it appears much of that product is now sold and running out, according to Roy Bingham, founder and chief executive officer of BDS Analytics. “The true impact of licenses is starting to be felt since the carryover from December buying prior to the licensed market has been sold,” says Bingham. “Some of the major brands have consciously not applied for licenses. Some of that has to do with the flexibility the government has given them to wait.”
A fourth reason for a potential bottleneck could also come from packaging and labeling rules. “There will have to be many modifications to products to ensure they follow the new potency regulations, and many formulations will have to be modified in order to meet new regulations,” says Czarkowski. Distributor licenses, according to The Bureau, have a number of compliance documentation requirements, such as arranging for all product testing, quality assurance and packaging and label accuracy. Everything has to be packaged before it gets to a dispensary, which is a new rule California businesses need to comply with.
Pricing is the Indicator
There are a handful of reasons why prices could increase; some of them are more defined than others, the biggest factor being the tax burden passed on to consumers, where reports showed up to a 40% increase from last year. A price increase in the future could also come from The Bureau implementing testing regulations throughout 2018, as mentioned previously.
If prices were to surge enormously and very quickly, that might be an indicator that a shortage is fast approaching. A dramatic increase in price over this year could squeeze margins for smaller producers, forcing retailers to pass that burden on to consumers as well.“So yes, the rumors are true.”
According to Roy Bingham, there has been a significant increase in pricing in all categories at the retail level. “In January and February, we are seeing about 10% increases per month in average retail prices,” says Bingham. “If we look at concentrates in California during 2017, they averaged about $34 by the end of the year, whereas it was about $31 at the start of 2017. So in January, prices have increased up to $38, which is a bit above trend, but in fact we were seeing a trend upwards before January 1st as well.” Comparing that with edibles pricing, Bingham says we see a clear jump at the start of 2018. “It was basically flat in 2017, averaging $14 roughly almost straight-line across, dipped in December, then in January it jumped to $17 and then to $18 in February, a big increase and significantly more than concentrates,” says Bingham. He also says flower was hovering around $9 per gram in December 2017, but surged above $10 in February 2018.
According to Cannabis Benchmarks, the California wholesale averages surged in the summer of 2017 up to $1,631 by September, then reached their lowest point in December, with their spot index at $1,368. The Cannabis Benchmarks report underlines some important reasons for the changes in pricing, but they also attribute it to the new licensing system.
“Increasing operating expenses for businesses preparing to enter California’s licensed system in 2018 were key to propping up supply side rates in the first six months of 2017. New compliance requirements were being instituted to varying degrees by local governments, while market participants warily eyed draft regulations from state officials for guidance as to how to prepare their sites and facilities to meet under-construction regulatory mandates.”
Their report highlights some very important aspects of the supply chain. “Again, it is likely that the increased costs faced by operators up and down the supply chain exert some upward pressure on wholesale rates, preventing them from steep year-over-year declines that were observed in some of the other major Western markets,” reads the Cannabis Benchmarks report.
So How Can Businesses Prepare?
Well to start, producers should make sure their operations and product are clean and safe. Making sure your product will pass a pesticide test should be top of mind. Dispensaries should also be wise in selecting their suppliers, performing supplier quality audits or some form of verification that they meet your standards is key in a consistent supply chain.
Dr. Jon Vaught, chief executive officer of Front Range Biosciences, believes tissue culture could be a viable solution for some California producers. Using tissue culture, as a form of propagation instead of mothers and clones can be cleaner, cheaper and more efficient, thus allowing growers to keep up with demand and prevent a shortage.
Dr. Jon Vaught, CEO of Front Range Biosciences
Dr. Vaught says growers could look to tissue culture as a means to “mitigate risk to their supply chain and mitigate the risk of potential loss and improve their ability to efficiently grow their plant.” Maintaining a disease-free, sterile environment is a huge advantage in the cannabis market. “The real use of tissue culture is to provide disease free, clean, certified material, that has gone through a QA program,” says Dr. Vaught. “In greenhouses, the ability to control your environment is also critical because your margin of error is high. Variations in sunlight, weather, humidity all of these things have an impact in your plants. Technology can help monitor this.”
We’ve covered the basics of tissue culture previously on CIJ, with Dr. Hope Jones chief science officer of C4 Laboratories. She echoes many of Dr. Vaught’s points, firmly believing that, having existed for decades, tissue culture is an effective propagation tool for advanced breeders or growers looking to scale up.It is a complex supply chain that requires systems thinking.
It is important to note they don’t think growers should try this at home. Work with professionals, get the necessary funding, the training and facilities required if this is a project that interest you. “There’s a pretty big barrier to entry there,” Dr. Vaught urges. “The ability to manage thousands or millions of plants in a greenhouse increases risk, whereas in the lab, you’ve got a safe, secure, sterile environment, reducing risk of disease, making things easier to manage. The producers most successful at large scale are controlling those variables to the T.”
Ultimately, one segment of the market can’t prevent a bottleneck. It is a complex supply chain that requires systems thinking. Regulators need to work with producers, manufacturers, retailers, distributors, patients, consumers and laboratories to keep an eye on the overall supply chain flow.
Diane Czarkowski says the California market should prepare for this now if they haven’t already. “We have seen supply issues in every market going through a change. Other potential bottlenecks will occur because former distribution channels will be required to change,” says Czarkowski. “So yes, the rumors are true.”
Earlier this week Capitol Analysis Group, a cannabis-testing laboratory based in Lacey, Washington, announced they are conducting a “data-driven Lab Transparency Project, an effort to improve accuracy of cannabis testing results in the state through transparency and a new third-party auditing process,” according to a press release. They plan to look through the state’s traceability data to find patterns of deviations and possible foul play.
The project launch comes after Straightline Analytics, a Washington cannabis industry data company, released a report indicating they found rampant laboratory shopping to be present in the state. Lab shopping is a less-than-ethical business practice where cannabis producers look for the lab that will give them the most favorable results, particularly with respect to higher potency figures and lower contamination fail rates.“Lab shopping shouldn’t exist, because it is a symptom of lab variability,”
According to the press release, their report “shows that businesses that pay for the highest number of lab tests achieve, on average, reported potency levels 2.71% higher than do those that pay for the lowest number of lab tests.” They also found labs that provide higher potency figures tend to have the largest market share.
The Lab Transparency Project logo
The goal of The Lab Transparency Project is to provide summaries of lab data across the state, shining a light in particular on which labs provide the highest potency results. “Lab shopping shouldn’t exist, because it is a symptom of lab variability,” says Jeff Doughty, president of Capitol Analysis. “We already have standards that should prevent variations in lab results and proficiency testing that shows that the labs are capable of doing the testing.” The other piece to this project is independent third party auditing, where they hope other labs will collaborate in the name of transparency and honesty. “Problems arise when the auditors aren’t looking,” says Doughty. “Therefore, we’re creating the Lab Transparency Project to contribute to honesty and transparency in the testing industry.”
Dr. Jim McRae, founder of Straightline Analytics, and the author of that inflammatory report, has been a vocal critic of the Washington cannabis testing industry for years now. “I applaud Capitol Analysis for committing to this effort,” says McRae. “With the state’s new traceability system up and running following a 4-month breakdown, the time for openness and transparency is now.” Dr. McRae will be contributing to the summaries of lab data as part of the project.
According to Doughty, the project is designed to be a largely collaborative effort with other labs, dedicated to improving lab standards and transparency in the industry.
The cannabis industry of the United States is unlike other horticulture markets in the country. It’s younger, less traditional and with roots in a black market, it’s no surprise that its forerunners aren’t afraid to experiment with new approaches and technology.
The rapid adoption of IoT (Internet of Things) technology is one way in particular that this new generation of producers is stepping up, and they’re beginning to reap the rewards. But to better demonstrate how significant the implementation of IoT tech can be, we’ll peek over the fence at other craft-oriented food industries—namely wine and chocolate—to discover how effective they can be long-term for serious players in the cannabis industry.
The results, as you can probably guess, are astounding.
Farm Productivity and Precision is on the Rise
IoT tech isn’t just a cool new thing for experimental growers – it’s as necessary as air in the 21st century. New and veteran farms alike are discovering ways to streamline production and enhance the quality of their crops. One of the most common implementations of IoT tech in agriculture is the installation of smart measurement tools. Remote sensors can monitor soil acidity, humidity, salt concentrations, temperature and a variety of other metrics, automating the collection of data and providing a clear picture of plant health. For many farms, like E. & J. Gallo Winery, this is a game-changer.By installing hundreds of sensors per block and upgrading to a more precise irrigation system, Gallo was able to connect moisture measurements to a central system
Before placing sensors in over 250 acres of their vineyard, Gallo could only make irrigation adjustments at the large block level. Even with careful monitoring of moisture levels, the grape yield was inconsistent in size and flavor. By installing hundreds of sensors per block and upgrading to a more precise irrigation system, Gallo was able to connect moisture measurements to a central system. The system collects the data, considers the weather forecast, and automatically irrigates small areas of the vineyard as needed to ensure all plants are optimally watered. This resulted in a more uniform crop, less water waste and more desirable grapes.
Cannabis farms are starting to pick up on this simple approach as well. Organigram, one of Canada’s leading Cannabis producers, is well aware of the benefits of this kind of automation and data collection. “All our grow rooms are helping us learn all the time,” says Matt Rogers, head of production at Organigram. “With 20 grow rooms going, we can gather as much information about these plants as you would get in a century of summers.”
Automation and precision have enabled by Gallo and Organigram to improve yield and increase precision, which has helped them achieve their well-respected status in the wine and cannabis industries.
The Supply Chain is Becoming More Transparent
As much as we would like the industry to be free of scams and crooks, there’s more than a few producers stretching the truth when it comes to labeling product. MyDx, a cannabis chemical analyzer, recently revealed that the label on the package often does not totally coincide with the product within.Protecting your brand’s reputation is a necessity and IoT tech is helping some pioneering industries do that.
For example, the most frequently tested cannabis strain, “Blue Dream”, averages a 64% difference in chemical makeup from sample to sample. Similarly, “Gorilla Glue” and “Green Crack” show as much as 83% variation from sample to sample—largely because there’s no regulation of these names.
While variation is inevitable from grower to grower, plant to plant, and even between different parts of the same plant, misleading labels and the addition of ‘fillers’ is a growing issue for edible cannabis producers, and the threat it poses to your brand isn’t minor. Protecting your brand’s reputation is a necessity and IoT tech is helping some pioneering industries do that.
Wine in China is a powerful example of how improved traceability can reduce large-scale mislabeling. Brand-name winemakers in the country face a massive problem: 70% of imported wines are counterfeits. To combat this, winemakers are attaching near-field communication (NFC) labels to imported and domestic bottles. It’s a dramatic solution, but one that’s protecting the brand of winemakers dedicated to quality and transparency.
As the legalization of cannabis spreads and coveted strains emerge, so will the availability of counterfeits—or, at the very least, less-than-truthful labeling. This has proven to be true in almost every specialty market, and adopting improved traceability tech will defend your brand and reputation from the consequences of selling a product that’s discovered to be more ‘filler’ than cannabis.
Compliance is Easily Achieved
The conversation of cannabis regulation generally revolves around age restrictions and driving while impaired, but government compliance is far more complicated – especially for facilities that create cannabis-infused food products. And here’s the frustrating part for those who must (and should) maintain a food safety plan: every time a regulation is adjusted (or every time a new variation is added in another state), facilities must be able to document changes in procedures, recipes and hazard controls. It gets complicated quickly, especially if all the documentation is kept manually.
There’s a lot to be gained by connecting your systems and products to the Internet of ThingsA central, connected system is the best way for food manufacturers to streamline and automate a variety of documentation and food safety tasks, which can mean thousands of dollars saved over months or years. Using software like Icicle, facilities can create a comprehensive data environment that’s dynamic and accessible from anywhere. Incoming measurements from connected equipment and employee records are collected and an admin dashboard allows you to see what food safety systems are thriving and which need revisiting. The records – transformed into a compliant food safety plan – can then be pulled up during audits and inspections on the spot, saving the months that companies usually spend preparing documentation.
According to Mitchell Pugh of Chewter’s Chocolates, their system “gives me a great peace of mind in the sense to know we have all our information prepared and anything that an inspector is going to ask for – whether they’re looking for one product, a general system, a certain hazard, or a bill of ingredients or materials or an allergen – is easy for us to search for it, pull it up, and find exactly what they’re looking for.”
Considering that most food manufacturers still record measurements and create food safety plans manually, this is an area where progressive companies can quickly outpace their non-automated rivals.
Whether you’re a grower, dispensary, food producer, or some other kind of cannabis professional, there’s a lot to be gained by connecting your systems and products to the Internet of Things. Which direction will you take?
According to a press release sent out this morning, the American Association for Laboratory Accreditation (A2LA) accredited their first Pennsylvania cannabis-testing laboratory. Located in Harrisburg, PA, Keystone State Testing finalized their accreditation for ISO/IEC 17025 on February 21, 2018.
A2LA also accredited the laboratory to two cannabis-testing-specific programs, ISO/IEC 17025 – General Requirements for the Competence of Testing and Calibration Laboratories and A2LA R243 – Specific Requirements – Cannabis Testing Laboratory Accreditation Program. The R243 program is a collaboration with Americans for Safe Access (ASA) that takes some recommendation for regulators from the American Herbal Products Association (AHPA).
Dr. Kelly Greenland, owner and operator of Keystone State Testing
Keystone State Testing is now able to perform all of the tests for cannabis products under the state of Pennsylvania’s regulations. According to Dr. Kelly Greenland, owner and operator of Keystone State Testing, getting accredited is about safeguarding patient safety. “Keystone State Testing is proud to be the first Pennsylvania laboratory to earn A2LA ISO/IEC 17025 accreditation as well as ASA’s Patient Focused Certification,” says Dr. Greenland. “We regard these accreditations and certifications as the first steps in ensuring patient safety and will continue to do everything within our power to ensure medical marijuana patient safety.”
A2LA General Manager Adam Gouker says he wants to see more accreditations include the ASA requirements in R243. “A2LA is pleased to see the growing adoption of the combined assessment to include the ASA requirements,” says Gouker. “Our staff has worked tirelessly in conjunction with ASA staff to create this combined program and offer something that no other accreditation body in the world offers. We congratulate Keystone State Testing Labs on leading the charge in the state of Pennsylvania and laying the groundwork for future laboratories to follow.”
Government regulations keep millions of Americans safe every year by controlling what companies can put in their products and the standards those products must meet to be sold to consumers.
Enter the strange case of legal cannabis: In order for cannabis to be legally distributed by licensed medical professionals and businesses, it must be tested. But unlike other consumable goods, cannabis is not regulated by the FDA. Without an overarching federal policy requiring cannabis testing laboratory accreditation, the testing and laboratory requirements differ greatly across state lines.For medical cannabis specifically, accredited testing facilities are especially important.
To be federally regulated, cannabis would first have to be federally legalized. It turns out that states and businesses alike are not willing to wait for a federal mandate. Many states have begun to adopt standards for cannabis testing and some, such as Ohio, have even announced mandatory ISO/IEC 17025 accreditation for all cannabis testing laboratories. As the industry evolves, increased compliance expectations are certain to evolve in tandem.
Some cannabis labs have even taken the initiative to seek ISO/IEC 17025 accreditation of their own volition. Seth Wong, President of TEQ Analytics Laboratories, shared in a press release:
“By achieving ISO/IEC 17025 accreditation, TEQ Analytical Labs believes that we can address the concerns throughout the cannabis industry regarding insufficient and unreliable scientific analysis by providing our clients with State required tests that are accredited by an international standard.”
Other laboratories, such as DB Labs in Las Vegas and EVIO Labs in Florida are also leading the accreditation charge in their respective states, ahead of any state mandates.
There are key reasons why accreditation in cannabis testing labs is important. First and foremost, cannabis is a consumable product. Like fruits and vegetables, cannabis is prone to pesticides, fungi and contaminants. The result of putting a potentially hazardous material on the market without proper and documented testing could lead to a public health crisis. An accredited testing lab, however, will ensure that the cannabis products they test are free from harmful contaminants.
By utilizing role-based trainings, labs can trust employees are receiving proper onboarding.
For medical cannabis specifically, accredited testing facilities are especially important. Because many consumers of medical cannabis are immuno-compromised (such as in the case of chemotherapy patients), ensuring that products are free from any and all contaminants is critical. Further, in order to accurately determine both short- and long-term effects of prescribed cannabis consumption, accredited and compliant laboratories are necessary.
Accreditation standards like ISO/IEC 17025 also provide confidence that testing is performed properly and to an internationally accepted standard. Rather than returning a “pass/fail” rating on products, the Cannabis Safety Institute reports that an ISO/IEC 17025 laboratory is required to produce numerical accuracy percentages in testing for “at a minimum, cannabinoids, pesticides, microbiology, residual solvents, and water activity.” Reliable data sets that can be reviewed by both accreditors and the public foster trust between producers and consumers.
Finally, ISO/IEC 17025 accreditation demonstrates that a laboratory is properly staffed and trained. The Cannabis Safety Institute’s “Standards for Cannabis Testing Laboratories” explains that conducting proper analytical chemistry on cannabinoids (the chemical compounds extracted from cannabis that alter the brain’s neurotransmitter release) requires personnel who have met specific academic and training credentials. A system to monitor, manage and demonstrate proficiency is necessary to achieve and maintain accreditation. With electronic systems in place, this management and documentation minimizes risk and also minimizes administrative time tracking and maintaining training records.
Following the proper steps of a standardized process is key to improving and growing the cannabis industry in coming yearsFor cannabis testing labs, utilizing a comprehensive software solution to achieve and maintain compliance to standards such as ISO/IEC 17025 is key. Absent of a software solution, the necessary compliance requirements can become a significant burden to the organization. Paper tracking systems and complex spreadsheets open up organizations to the likelihood of errors and ultimately risk.
Because ISO/IEC 17025 has clearly defined expectations for training, a software solution also streamlines the training process while simultaneously documenting proficiency. By utilizing role-based trainings, organizations can be confident employees are receiving proper onboarding and in-service training. Additionally, the effectiveness of training can be proven with reports, which results in smoother audits and assessments.
Following the proper steps of a standardized process is key to improving and growing the cannabis industry in coming years- which means utilizing technology tools such as electronic workflows to ensure proper process controls. Beyond adding critical visibility, workflows also create efficiencies that can eliminate the need to increase staffing as companies expand and grow.
For an industry that is changing at a rapid pace, ensuring traceability, efficient processes and visibility across organizations is paramount. Using a system that enables automation, process control, document management and documented training procedures is a step in the right direction. With the proper software tools in place, cannabis testing labs can achieve compliance goals, demonstrate reliable and relevant results and most importantly ensure consumer safety.
Ultimately, the goal of any good company is to take care of their customers by providing a quality product at a competitive price. You take the time to use good practices in sourcing raw materials, processing, testing and packaging to make sure you have a great final product. Yet in practice, sometimes the product can degrade over time, or you find yourself facing costly manufacturing stoppages and repairs due to downed equipment or instrumentation. This can harm your company’s reputation and result in real, negative effects on your bottom line.
One thing you can do to prevent this problem is to have a properly scaled calibration and maintenance program for your organization.
First, a short discussion of terms:
Figure 1– Periodic calibration of an electronic balance performed using traceable standard weights helps to ensure that the balance remains within acceptable operating ranges during use and helps identify problems.
Calibration, in the context of this article, refers to the comparison of the unit under test (your equipment) to a standard value that is known to be accurate. Equipment readings often drift over time due to various reasons and may also be affected by damage to the equipment. Periodic calibration allows the user to determine if the unit under test (UUT) is sufficiently accurate to continue using it. In some cases, the UUT may require adjustment or may not be adjustable and should no longer be used.
Maintenance, in the context of this article, refers to work performed to maximize the performance of equipment and support a long life span for the equipment. This may include lubrication, adjustments, replacement of worn parts, etc. This is intended to extend the usable life of the equipment and the consistency of the quality of the work performed by the equipment.
There are several elements to putting together such a program that can help you to direct your resources where they will have the greatest benefit. The following are some key ingredients for a solid program:
Keep it Simple: The key is to scale it to your operation. Focus on the most important items if resources are strained. A simple program that is followed and that you can defend is much better than a program where you can never catch up.
Written Program: Your calibration and maintenance programs should be written and they should be approved by quality assurance (QA). Any program should include the following:
Equipment Assessment and Identification: Assess each piece of equipment or instrument to determine if it is important enough to be calibrated and/or requires maintenance. You will probably find much of your instrumentation is not used for a critical purpose and can be designated as non-calibrated. Each item should have an ID assigned to allow tracking of the maintenance and/or calibration status.
Scheduling System: There needs to be some way to schedule when equipment is due for calibration or maintenance. This way it is easy to stay on top of it. A good scheduling system will pay for itself over time and be easy to use and maintain. A web-based system is a good choice for small to mid-sized companies.
Calibration Tolerance Assignment: If you decide to calibrate an instrument, consider what kind of accuracy you actually need from the equipment/instrument. This is a separate discussion on its own, but common rule of thumb is that the instrument should be at least 4 times more accurate than your specification. For very important instruments, it may require spending the money to get a better device.
Calibration and Maintenance Interval Assignments: Consider what interval you are going to perform maintenance for each equipment item. Manufacturer recommendations are based on certain conditions. If you use the equipment more or less often than “normal” use, consider adjusting the interval between calibrations or maintenance.
OOT Management: If you do get an Out of Tolerance (OOT) result during a calibration and you find that the instrument isn’t as accurate as you need. Congratulations! You just kept it from getting worse. Review the history and see if this may have had an effect since the last passing calibration, adjust or replace the instrument, take any other necessary corrective actions, and keep it up.
Figure 2- Maintenance engineers help keep your systems running smoothly and within specification for a long, trouble-free life.
Training: Make sure personnel that use the equipment are trained on its use and not to use equipment that is not calibrated for critical measurements. Also, anyone performing calibration and/or maintenance should be qualified to do so. It is best to put a program in place as soon as you start acquiring significant equipment so that you can keep things running smoothly, avoid costly repairs and quality control problems. Don’t fall into the trap of assuming equipment will keep running just because it has run flawlessly for months or years. There are many bad results that can come of mismanaged calibration and/or maintenance including the following:
Unscheduled Downtime/Damage/Repairs: A critical piece of equipment goes down. Production stops, and you are forced to schedule repairs as soon as possible. You pay premium prices for parts and labor, because it is an urgent need. Some parts may have long lead times, or not be available. You may suffer reputational costs with customers waiting for delivery. Some calibration issues could potentially affect operator safety as well.
Out of Specification Product: Quality control may indicate that product is not maintaining its historically high quality. If you have no calibration and maintenance program in place, tracking down the problem is even more difficult because you don’t have confidence in the readings that may be indicating that there is a problem.
Root Cause Analysis: Suppose you find product that is out of specification and you are trying to determine the cause. If there is no calibration and maintenance program in place, it is far more difficult to pinpoint changes that may have affected your production system. This can cause a very significant impact on your ability to correct the problem and regain your historical quality standards of production.
A solid calibration and maintenance program can go a long way to keeping your production lines and quality testing “boring”, without any surprises or suspense, and can allow you to put more sophisticated quality control systems in place. Alternatively, an inappropriate system can bog you down with paperwork, delays, unpredictable performance, and a host of other problems. Take care of your equipment and relax, knowing your customers will be happy with the consistent quality that they have become accustomed to.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
