For those looking for relief from bad news in general, whether it is about the pandemic, the economic meltdown or the impact of both on the cannabis industry, there is a glimmer of hope from the Kiwis this month.
On April 1, New Zealand’s Medical Cannabis Agency opened its application process for cultivation and manufacturing. Beyond sounding the starting gun for the race to local production and imports, the new rules also create a licensing framework that is aligned with international GMP (pharmaceutical grade) quality standards now becoming the norm globally for medicinally bound product.
It is good news for the industry, but it is good for a lot of other people too.
Doctors will be able to prescribe the drug more normally and for more conditions. And patents will have more access.
That said, this will also be a strictly “pharmacized” market for now with an emphasis on dose-controlled products like pills, oils and creams. Edibles are forbidden. And while dried flower will be allowed, smoking is strictly banned.
The license fees for cannabis start-ups are ridiculously low for those used to North American and even European pricing (all in for $7,409). But, even here, it is not a business for those without deep pockets and the right connections. The GMP certification required before such approvals are issued does not come cheap.
What Is Behind the Change?
This is not an overnight edict, obviously. And the wheels have been turning here since late 2018 when palliative patients were given limited access (basically a defence against criminal prosecution for possession). The medical cannabis scheme became law in December last year, allowing doctors to prescribe in limited situations.It remains to be seen if recreational will follow just six months later here.
In opening the licensing process, New Zealand’s health agency is keeping its word about rolling out the program on time. But unlike other jurisdictions, this first step in April is also part of a rolling agenda that will probably see more cannabis reform coming to Kiwis before the end of the year. This would be a lightning quick transition indeed for a country that as of November 2018, became the last country in the world to make hemp seed fully legal for human consumption.
Cannabis was completely outlawed in 1965. That said, it is estimated that about half a million New Zealanders still use the drug either medically or recreationally every year.
But reform is in the air. Lawmakers and policy makers have been looking at other recreational models for at least the last 12 months, including sending observers to Portugal last year to observe how this famously “open” European country has dealt with the issue.
Greater Reform A Possibility In September
This is not going to be all she wrote in New Zealand this year for cannabis reform. Legalizing the personal use of cannabis is being floated as a referendum on the same day as the 2020 General Election (September 19). The referendum may not pass, although support for the measure seems to be steadily rising. Currently about 59% of New Zealanders support medical use reform. A new poll seems to also show (as of March 31), that 54% of Kiwis might support personal recreational use.
No matter what happens, however, New Zealanders are just the next nation-state to admit that prohibition has roundly failed. 83% of New Zealanders believe that illicit cannabis is widely available anyway.
Regardless of the success of recreational reform, at least this fall, the medical market is likely to expand and the topic of greater reform is clearly in the air.
As always, no matter the geography, medical use comes first. It remains to be seen if recreational will follow just six months later here. Unless of course the general election itself is delayed because of the trailing end of the pandemic.
While it is still early to say what the impact of COVID-19 will be on dispensary sales into April, it is clear that the cannabis industry’s position as an ‘essential business’ is likely to help. States like Massachusetts are just allowing medical use businesses to remain open while states like California and Washington are allowing cultivators, producers and dispensaries to remain open. Meanwhile, according to Locate.AI’s analysis of retail traffic, the rest of the retail sector is down between 44% and 99% recently, depending on the category.
On March 24, the Washington State Liquor and Cannabis Board declared cannabis an essential industry including producers, processors and retailers. For dispensaries, they are now allowing curbside pick-ups for all adult customers. Colorado has gone further to restrict adult sales to curbside pick-ups only for recreational cannabis. Medical customers are still allowed to enter stores, but must practice social distancing. Across the states, dispensaries are offering curbside and in-store pick-up. In addition, at some dispensaries, delivery fees are being waived for larger purchases.
The International Chamber of Commerce recently published “Coronavirus Guidelines for Business,” summarizing actions businesses can take to reduce risks for operations and employees. Going further, The New England Complex Systems Institute (NECSI) recently published practical business safety guidelines detailing how these essential businesses can stay open and ensure safety. The guidelines, which are typically one to two pages and easily readable, are applicable to dispensaries. Certain suggestions, such as avoiding crowded spaces and maintaining 6ft distance will be familiar. Other suggestions go beyond common advice offering sensible recommendations to reduce risk of transmission as much as possible, such as the following:
“Consider setting up one or more ‘necessities only’ sections that enable a short shopping trip for most of the customers. Setting up such short shopping areas outside when weather permits, or at remote locations, can dramatically reduce the shopping density inside the store.” or
“Use floor markings or other visual system to indicate a one-way loop (with short cuts, but no back way) inside the store to promote a dominant walking direction and avoid customers crossing paths or crowding.”
While many cannabis businesses have already gone beyond recommendations from the local health authorities, there are some that would still benefit from adopting the NECSI Guidelines to further protect their customers and employees. The guidelines are written for laypeople and are easy to print and share.
NECSI’s coronavirus guidelines can be found on the group’s volunteer website endcoronavirus.org.
endCoronavirus.org is a volunteer organization with over 6,000 members built and maintained by the New England Complex Systems Institute (NECSI) and its collaborators. The group specializes in networks, agent-based modeling, multi-scale analysis and complex systems and provides expert information on how to stop COVID-19.
The New England Complex Systems Institute (NECSI) is an independent academic research and educational institution with students, postdoctoral fellows and faculty. In addition to the in-house research team, NECSI has co-faculty, students and affiliates from MIT, Harvard, Brandeis and other universities nationally and internationally.
If you missed the Cannabis Industry Journal’s 3rd Annual Infused Products Virtual Conference last week, one of the speakers, Ellice Ogle, founder and CEO of Tandem Food presented on Food Safety Culture in the Cannabis Industry. An overview of the information in the presentation can be found here, Concentrate On a Food Safety Culture In Your Workplace. Below are answers to some of the post-presentation questions we received, but were unable to answer during the Q&A session. To get your additional questions answered or for a complimentary consultation for your company, specially provided to readers of Cannabis Industry Journal, contact Ellice Ogle at Ellice@tndmfood.com.
Question: What are some recommended digital programs for internal auditing?
Ellice Ogle, founder and CEO of Tandem Food
Ellice Ogle: Before looking at the tools for conducting an internal audit, understand the goal of the internal audit. One key aspect of internal auditing is knowing which standard(s) to audit against. For example, regulatory audits for cGMP certification are different than optional third-party certifications such as any GFSI scheme (SQF, BRC, PrimusGFS, etc). While the standards ultimately have the same goal of food safety with varying focuses, it is important to have an experienced food safety specialist conduct the audit as realistically as possible. The experienced specialist will then be able to recommend an appropriate tool for internal auditing moving forward, whether it is software such as FoodLogiQ, SafetyChain, Safefood 360°, among many others, or simply providing a template of the audit checklist. Overall, the risk of foodborne illnesses can be minimal, but it takes persistence and commitment to achieve a successful food safety culture. Metrics can assist in assessing the commitment to food safety and, as a result of these efforts, you will minimize the risk of compromising the health and safety of your guests, employees, foods and business. If you want a specific example, I’d like to direct you to a case study in partnership with Heylo LLC in Washington state, posted on the Tandem Food website.
Q: What are examples of ways to share environmental monitoring results to enhance a good edible safety culture?
Ellice: In the Control of Listeria monocytogenes in Ready-To-Eat Foods: Guidance for Industry Draft Guidance (2017), the FDA states that “a well-designed environmental monitoring program promotes knowledge and awareness of the environmental conditions that could result in product contamination and is a more effective program than product testing alone.” In other words, environmental monitoring programs and results can identify environmental conditions within a facility that could cause potential contamination. Publishing these findings, for example in the form of a case study or sharing the details of the practice, can enhance the food safety culture in the specific niche industry. For example, to borrow from the meat industry, Tyson Foods, Inc developed and shared environmental monitoring programs that are used by their peers, promoting a unified food safety culture, rather than competitive, guarded secrecy.
Q: Are the food safety requirements the same for retail and manufacturing?
Ellice: The food safety requirements are not exactly the same for retailers and manufacturers. The difference is inherent that retailers are working with finished product while manufacturers are working with raw ingredients and the manufacturing process to develop the finished product. Let’s take a closer look at cannabis regulation in Washington state. Chapter 314-55-104(12) states “Processors creating marijuana extracts must develop standard operating procedures (SOPs), good manufacturing practices (GMPs), and a training plan prior to producing extracts for the marketplace.” Compare this to the requirements for retailers, 314-55-105(11) which states “A marijuana producer, processor or retailer licensed by the WSLCB must conduct the production, processing, storage, and sale of marijuana-infused products using sanitary practices.” While SOPs and GMPs are not explicitly mentioned for retailers as they are for manufacturers, sanitary practices could be documented as Sanitation Standard Operating Procedures (SSOPs). Proper storage practices can also be an overlapping food safety concern with respect to temperature control or pest management systems. Overall, food safety should remain a top priority in maintaining the integrity of the products throughout the supply chain.
Q: To your knowledge, has there been a food safety outbreak associated with a cannabis-based product?
Ellice: One possible cannabis-related death investigated in 2017 uncovered deadly pathogens in medical cannabis. However, to my knowledge, I have not seen a food safety outbreak associated with a cannabis-based product. There might be any number of reasons that this is so, for example, possibly because a food safety outbreak associated with a cannabis-based product might not have had a large impact to make headlines. Although, with the cannabis industry already misunderstood and a stigma so prevalent to even promote fake news, it is better to prevent an outbreak from ever occurring. One thing to note is that ultimately cannabis is just another ingredient in existing products, of course with special properties. So, the common food safety offenders are present: listeria, Salmonella, E. Coli, among others. On the plant, cannabis food product manufacturers must minimize the risk of mycotoxins produced by molds, pest contamination, and pesticide contamination. For products that contain cannabis infusions or extractions as an ingredient, there is the possibility of the growth of Botulism toxin. Many of these pathogens can be minimized by appropriate heat treatment or maintenance of refrigeration, testing, and by practicing preventive measures. Arguably, the largest potential for pathogenic contamination is due to improper employee handling. To refer to what we discussed earlier, employee training is key, as well as proper enforcement. Having a strong food safety culture ensures that people have the knowledge of food safety risks and the knowledge of preventing outbreaks.
Q: Do any of the panelists know of any efforts to develop a food safety-oriented standard for the cannabis industry?
Ellice: Yes, Tandem Food LLC is positioned to consult on cGMP certification for manufacturing facilities in the cannabis industry. First, a gap assessment can be conducted to obtain useful actionable data for you, rather than be an intimidating experience. Working from the identified baseline, Tandem Food will work with you to create and implement all related documentation and programs, providing training as necessary. Overall, with the right commitment, cGMP certification can take 6-12 months.
Former NFL player Kyle Turley made headlines this week for some eye-catching remarks. The retired offensive lineman entered the cannabis industry in 2017, when he launched Neuro Armour (now called Neuro XPF), a brand of CBD products.
Turley and his Neuro XPF brand made claims in recent weeks, both on their website and in various social media posts on Facebook and Twitter, saying that their CBD products can cure COVID-19. Two quotes below, one from their website and one from a Facebook post, show how the company touted CBD as an effective medicine for treating COVID-19.
“Crush Corona . . . While scientists around the world are working 24/7 to develop a COVID-19 vaccine, it will take many more months of testing before it’s approved and available. However, there’s something you can do right now to strengthen your immune system. Take CBD . . . CBD can help keep your immune system at the stop of its game. . . . We want everyone to take CBD and take advantage of its potential to help prepare your body to fight a coronavirus infection. So, we’re making all of our products more affordable.”
“Crush Corona! Your best defense against the COVID-19 blitz starts with a strong immune system. It’s what protects your body from the everyday attacks of bacteria, viruses, parasites and a host of other nasties. Learn more here: https://neuroxpf.com/crush-corona/”
The U.S. Food & Drug Administration (FDA) got wind of these marketing tactics and sent Turley and his brand a warning letter. “FDA is taking urgent measures to protect consumers from certain products that, without approval or authorization by FDA, claim to mitigate, prevent, treat, diagnose, or cure COVID-19 in people,” reads the warning letter. “As described below, you sell products that are intended to mitigate, prevent, treat, diagnose, or cure COVID-19 in people. We request that you take immediate action to cease the sale of such unapproved and unauthorized products for the mitigation, prevention, treatment, diagnosis, or cure of COVID-19.”
Before entering the cannabis space, Turley was diagnosed with chronic traumatic encephalopathy (CTE) and then early onset Alzheimer’s as a result of sustaining head injuries while playing in the NFL. Turley has a reputation for being an outspoken cannabis activist, crediting cannabis with improving his quality of life and eliminating the need for prescription opiates.
In a tongue-and-cheek response to the FDA, Turley posted the following on twitter: “OK OK, YOURE ALL RIGHT, ILL ADMIT IT! CHEAP CBD BRAND PRODUCTS WILL NOT PREVENT OR CURE COVID19!” Turley, making light of the situation, inserted the term “cheap” in there, almost challenging the FDA and disregarding their warning letter.
OK OK, YOURE ALL RIGHT, ILL ADMIT IT! CHEAP CBD BRAND PRODUCTS WILL NOT PREVENT OR CURE COVID19! @MarijuanaMoment
However, the FDA is not joking when they send these warning letters. According to the letter, Turley and his company have 48 hours to remediate the situation or face a federal court injunction.
Even though it’s valued at more than $15 billion, the burgeoning global cannabis industry has experienced recent layoffs. By the end of 2019, more than 600 cannabis employees got pink slips. Industry experts expect more of the same in 2020 as investigations, lawsuits and slumping valuations plague the industry.
Unfortunately for employers, layoffs are where the issues begin – not end. Especially for those without established policies and procedures. Without rules and regulations governing employment practices, business owners and operators are at considerable risk.
The 11 states where cannabis is legal for recreational use and the 33 where it’s medically legal tend to have more onerous employment practices liability (EPL) laws, where liability is often assumed by the employer for mistakes like poorly handled layoffs. This is further compounded by the fact that HR departments at fledgling cannabis companies tend to be small or non-existent and often ill prepared to deal with the legalities that come with termination.
Ensuring the right practices are in place prior to any layoffs is critical. Is your company facing employee terminations? Are you knowledgeable of how to handle it? Consider the following best practices:
Document problematic employees. Create a folder for each employee and document the details when problematic situations escalate to the point they need to be addressed. Should employees of a protected class engage in an EEOC, class action or personal lawsuit after they’re terminated, you’ll need this documentation to support your actions.
Create a formal termination procedure. Make sure the procedure includes well-thought-out details of your review process, including how employee performance is evaluated and what happens when those standards aren’t met. Spell out which behaviors are grounds for dismissal. When talking to the employee about a termination, have another employee or manager in the room to avoid claims of mishandling later on, typically their direct manager, someone from HR or your in-house attorney. Determine how the distribution of final compensation such as medical insurance or PTO will be handled so you’re prepared to answer those questions. These procedures should be spelled out in an employee handbook given to all at onboarding so there are no surprises.
Retain a qualified EPL attorney. Create a relationship with a qualified EPL attorney (not your cousin who does divorce law) to help you set policies and procedures initially and to consult with when a unique or particularly difficult situation arises.
Get the right EPL coverage. An EPL policy will defend a business from claims of breach of employment contraction, negligent evaluation, failure to employ or promote, wrongful termination, deprivation of career opportunity and mismanagement of employee benefits plans. Your EPL coverage will be determined by your location, clientele, employee profile and what you see as your biggest risks. When discussing the policy with your broker, weigh the following considerations to EPL coverage:
Reimbursement coverage versus pay on behalf. Should the policy pay your defense costs directly, or will you lay out the money and they’ll reimburse?
The definition of a claim and wrongful act will be different for each EPL policy.
EPL policy’s limit structure. Do you want defense limits to be outside or inside the coverage?
Having to lay off employees is never an easy choice for an employer. Make sure you and your business do everything right before and during the process so that the aftermath isn’t even more difficult, filled with lawsuits and liability claims.
“I really wanted an outlet for me, like someone like me, to be able to help out in this fight,” Wells said in a Harvard Crimson interview. “I knew I was, by far, not the only one who felt this way. And so what happened was, on the walk home from work that day from the lab, I thought, ‘Hey, I should try to organize something here in Boston so I could potentially be a part of a group that makes themselves available to health department officials or county officials.’”
Volunteers are made up of a mix of laboratory scientists, data scientists, software engineers, medical writers, CEOs and epidemiologists – from academic research institutes, national labs and private industry. Many state and local government agencies and organizations have already accessed the list for reference, including FEMA.
PCR testing is used in a wide variety of applications Image: Peggy Greb, USDA
Members of the cannabis industry can help to combat COVID-19. “The cannabis industry relies on specialized laboratories that routinely perform qPCR-based microbial tests,” says Wells. “As a result, these labs have basic skill sets and facilities required to participate in community COVID-19 testing.” Quantitative Polymerase chain reaction (qPCR), is a common technique for determining if there are microbial contaminants in flower, concentrates and infused products.
Some cannabis industry leaders have already taken to the call. “With the trend in legalization, the cannabis industry has built an excess testing capacity in anticipation of an increase in volumes,” says David Winternheimer, PhD, CEO of Pacific Star Labs, a Los Angeles-based cannabis research organization with an ISO-accredited testing laboratory. “As an essential industry, cannabis companies are open to helping the wider population in a crisis like this, and testing could easily be adopted in labs with excess microbial testing capacity.”
Michael Wells and his band of volunteers are asking to help get the word out to other scientists who would like to sign-up at https://covid19sci.org and for anyone to help share the database link with any relevant person in government or health services. “Right now, it is all hands on deck. We need every lab, facility, and pair of skilled hands to be deployed in this fight against the most dangerous pathogen our species has experienced at this scale in our lifetimes.”
endCoronavirus.org is a volunteer organization with over 6,000 members built and maintained by the New England Complex Systems Institute (NECSI) and its collaborators. The group specializes in networks, agent-based modeling, multi-scale analysis and complex systems and provides expert information on how to stop COVID-19.
The COVID-19 National Scientist Volunteer Database is a database of over 8,000 scientists from all 50 states, DC, Puerto Rico, and Guam who are eager to volunteer our time, expertise, equipment, and consumables to help you respond to the COVID-19 crisis. They have aggregated our contact information, locations, and skills sets into this easy to use centralized database. Their members include experts in scientific testing, bioinformatics, and data management, as well as key contacts willing to donate lab space and testing supplies.
The spectacular rise and crash of the Canadian cannabis stock market has been painful to watch, let alone to experience as an industry insider. The hype around the market has vanished and many investors are left disappointed. Large sustainable gains simply haven’t materialized as promised. The producers are clearly suffering. They have consistently been shedding value as they’ve been posting losses every quarter. Stock prices have plummeted along with consumer confidence. Attempts to reduce the cash bleeds through mergers, acquisitions, layoffs, restructures, fund raises, among others, have not resulted in any significant recovery. In short, the current model of a cannabis industry has failed.
Dr. Markus Roggen, Founder of Complex Biotech Discovery Ventures (CBDV)
How could it have been different? What should the industry have done differently? What makes the difference between failure and success? A recent article published in Nature (Volume 575) by Yin et al. titled “Quantifying the Dynamics of Failure Across Science, Startups and Security” analyzes the underlying principles of success. The article studies success rates of many groups after numerous attempts across three domains. One of the domains being analyzed are startup companies and their success in raising funds through many attempts at investment acquisition. The authors point out that the most important factor that determines success is not relentless trying but is actually learning after each attempt. Learning allows successful groups to accelerate their failures, making minute adjustments to their strategy with every attempt. Learning behavior is also seen early in the journey. This means that groups will show higher chances of success early on, if they learn from their mistakes.
If you want to succeed, you need to analyze the current state, test the future state, evaluate performance difference and implement the improved state.
This also needs to happen in the cannabis industry. Producers have been utilizing inefficient legacy systems for production. They have shackled themselves to these inefficient methods by becoming GMP-certified too early. Such certifications prevent them from experimenting with different designs that would enhance their process efficiency and product development. This inflexibility prevents them from improving. This means they are setting themselves up for ultimate failure. GMP is not generally wrong, as it ensures product safety and consistency. Although, at this early stage in the cannabis industry, we just don’t yet have the right processes to enshrine.
How can cannabis producers implement the above-mentioned research findings and learn from their current situation? In an ever-changing business environment, it is companies that are nimble, innovative and fast enough to continually refine themselves that end up succeeding. This agility allows them to match their products with the needs of their consumers and market dynamics. booking.com, a travel metasearch engine, is the prime example of this ethos because they carry out thousands of experiments per year. They have embraced failure through rapid experimentation of different offerings to gauge user feedback. Experimentation has allowed booking.com to learn faster than the competition and build a stronger business.
Soheil Nasseri, Business Associate at Complex Biotech Discovery Ventures (CBDV)
At CBDV, we put the need for iterative experimentation, failure and improvements to achieve breakthroughs at the core of our company. We pursue data to guide our decisions, not letting fear of momentary failure detract us from ultimate success. We continuously explore multiple facets of complex problems to come up with creative solutions.
A good example of how failure and rapid innovation guided us to success is our work on decarboxylation. We were confronted by the problem that the decarboxylation step of cannabis oil was inconsistent and unpredictable. Trying different reaction conditions did not yield a clear picture. We realized that the most important obstacle for improvements was the slow analysis by the HPLC. Therefore, we turned our attention to developing a fast analysis platform for decarboxylation. We found this in a desktop mid-IR instrument. With this instrument and our algorithm, we now could instantaneously track decarboxylation. We now hit another roadblock, a significant rate difference in decarboxylation between THCA and CBDA. We needed to understand the theoretical foundation of this effect to effectively optimize this reaction. So, we moved to tackle the problem from a different angle and employed computational chemistry to identify the origin of the rate difference. Understanding the steric effect on rate helped us focus on rapid, iterative experimentation. Now, with everything in place, we can control the decarboxylation at unrivaled speeds and to the highest precision.
If producers want to regain the trust of the market, they must embrace their failures and begin to learn. They should decrease their reliance on inefficient legacy production methods and experiment with new ones to find what is right for them. Experimentation brings new ways of production, innovative products and happier customers, which will result in higher profits. Producers should strive to implement experimentation into their corporate cultures. This can be done in collaboration with research companies like CBDV or through development of inhouse ‘centers of excellence.’
With much of the world shutting down and many of us forced to take refuge behind our own doors, we have some time to reflect on what actions led to this. There has been, in my opinion, a clear disconnect between our actions and health outcomes. We need to bridge this gap; We now have a moment to build that bridge. We can start by reassessing our endpoint measurement of health and disease and focusing on what leading measures will impact our lagging results. Think of it as HACCP-lite or home office HACCP. Small changes in the way we think and behave can lead to significant change.
Lagging measures – Lagging measures make great headlines and typically measure an outcome. These are easily quantifiable and therefore receive a good deal of the focus.
Leading measures – Leading measures are inputs that happen during the process and in advance of an outcome. Leading measures are often difficult to quantify.
This week, Nathan started a “Germ Jar” activity with his kids to track washing.
We are currently focused on the lagging measures for a communicable disease, COVID-19. Illness and death numbers stemming from the pandemic continue to rise, as is expected with more available testing. It is easy for us to dwell on these numbers as they climb and dominate the news. A study in Australia last decade indicated that just over 1% of those experiencing flu like symptoms sought treatment and eventually got tested. I’m not going to use the tip of the iceberg cliché, but there it is. Focusing on the rapidly rising rates of COVID may be easy to do, but it won’t help our future selves.
What we should be doing during this time, however, is looking at our own leading behaviors and how changing them can help prevent this situation from reoccurring.
Here are some inputs we can rethink:
Hand washing – The average American uses the restroom 6-7 times per day. This week I started a “Germ Jar” activity with my kids (spring break week!) to track washing. If we wash our hands every time we use the restroom and every time we eat, that’s roughly 10X per day. Our leading indicator of household health, then, is 10 hand washes per day. This principle can, and should be applied to workplaces, including schools, airports and hospitals. What if we had mandatory handwashing prior to airport security and boarding? My estimation is that data would indicate a sharp decline in illness and transmission rates.
Disinfecting/Sanitizing – Similar to hand washing, cleaning surfaces serves as a vital indicator of future health. Examples, such as this District in Freeport, Il, indicate that increasing frequency of disinfecting can lead to a dramatic decrease in numbers sick. In my new office setting, we have set a goal via the Germ Jar of 3 times per day wiping down high touch surfaces. As we reenter close-proximity society, we need to have a better understanding of what high touch surfaces are, both for those who are tasked to clean them, as well as those that are doing the touching. Reduction of touches coupled with above washing behaviors post-touch can help prevent disease transmission.
Nathan’s daughter adding to the Germ Jar
Monitoring – Lastly, we need to do a better job at monitoring ourselves and our environments. In my new office, we have enacted a temperature check every morning and night. If we practiced symptom reporting (coughing, sneezing, chills) and monitored temperature in other settings, such as offices and schools, could we start to see pockets of infection and trends? Taking it a step farther, while we invest a tremendous amount of time and money into protecting our food supply from foodborne illness, we rarely discuss preventive monitoring for other diseases, such as influenza and now COVID-19. Technologies are rapidly coming available that will allow us to perform quick diagnostics of both individuals and environments. If we were to monitor the air and surfaces of a school nurse’s office, would we find data that could prevent transmission of disease? Can we transfer HACCP-lite to additional (all) settings?
Over the next weeks and months, we are going to be inundated by the spike in COVID illnesses and deaths. During this time, it is on each of us to realize how our past behaviors led to the state we are in. When we return, viruses will not be absent from the world, our hospitals, schools, offices or our bodies. We can, starting now, begin to measure and change our leading behaviors and begin to shape a healthier future.
In this article you will learn how to control pests and improve the health of your cannabis plants using integrated pest management, commonly referred to as IPM. This involves a multi-point strategy – there is no quick fix, nor is there one solution that will wipe out all your pest problems. Proper pest management requires patience, consistency and determination.
It is important to understand that not all pesticides are bad. While many are incredibly harmful not only to pests, but also humans, in this article I will educate you about some of the safer alternatives to traditional pesticides. It is possible to safely control unwanted pests in your cannabis garden without harming yourself, your employees or the natural habitat around you.
Every cultivation facility should have a well-thought-out plan for their pest management program. This program should account for the prevention, and if necessary, eradication of: spider mites, russet mites, fungus gnats, root aphids, thrips and caterpillars. These are just a few of the more common pests you’ll find in a cannabis garden. There could also be many other less commonly known bugs, so you have to be vigilant in looking closely at your plants, and the soil, at all times. Complete eradication of a targeted pest can be difficult. Once a pest has established itself, decimating or decreasing the population will require an aggressive regimen that includes spraying daily to control populations and prevent other pests from getting established.
Spraying or applying pesticides to the foliage of plants isn’t the only way to control or eradicate pest populations. There are many other ways that you can minimize the spread of pests without the use of pesticides. In greenhouse and outdoor grows, growing specific types of plants around the cultivation area will attract both beneficial and predator bugs that will naturally control pest populations. Some plants that attract these bugs are: mint, peppers, and marigold. Beneficial and predator bugs, such as ladybugs, predator wasps and predator mites, can control unwanted pest populations in the area before they even have a chance to become a problem in your garden. Plants and flowers that attract bees, birds and insects will also create helpful bio- diversity, making it more difficult for the unwanted pests to thrive.
For indoor cultivation, it is imperative that you have your cultivation facility set up for a proper workflow. If you already have pests, you need to make sure you are not contaminating the rest of your facility when going from one area to the next. Make sure that you only go to contaminated areas at the very end of your day, and when you’re done working in that area, you must immediately exit the building. Do not ever walk back through the uncontaminated parts of your facility or the pests will spread quickly.
An aphid on a plant in a greenhouse
When most people think of pests in their cannabis garden they think of the more common varieties: spider mites, russet mites, aphids and thrips. However, there are also soil-dwelling pests that can exist, without your knowledge. These will decrease the health and vigor of your plants, without you even knowing they’re there, if you’re not careful to check for them. Some of the soil dwelling pests that plague cannabis plants are: root aphids, fungus gnat larvae and grubs. It is just as important to control the pests below the soil, feeding on your roots, as it is to control the pests that feed above soil on your plants.
Maintaining healthy plants is essential to controlling pest populations, both on the foliage and below the soil. Healthy plants will have an easier time fighting off pests than unhealthy plants. Plants have immune systems just like humans, and the stronger the plant’s immune system, the more likely it will be able to ward off pests and diseases. Allowing a plant to reach its full potential, by minimizing pests, means your plants will also have a better quality, smell and flavor, not to mention a bigger yield.
Worker Safety, Regulation and REI times
The application of pesticides requires certification from the state agricultural department. In certain situations, depending on the type of pesticide and method of application, a license may even be required. The application of pesticides without proper certification is against the law. Applying pesticides in a manner that is not in accordance with the label and instructions is also a violation of law.
The proper personal protective equipment (PPE) is required for anybody handling, mixing or applying pesticides. Employees can be a liability to your company if they are applying pesticides improperly. Make sure you and your entire staff are well educated about pesticide use requirements and limitations, prior to usage, and that only a properly certified person is handling the mixing and application at your facility.
The author, David Perkins, In his greenhouse after using insect killing soap.
After a pesticide is applied, you must abide by the re-entry interval (REI). This is the required time period limiting all workers from re-entry into areas where pesticides have been applied. This time period will vary depending on the type of pesticide used and the method of application. In some instances, pesticides applied in the last 30 days may require employee training before work can be done in those areas.
The misuse of or improper handling of pesticides is not only unlawful and dangerous to human health, but can also cause environmental damage to waterways and wildlife. The direct effects of pesticides on wildlife include acute poisoning, immunotoxicity, endocrine disruption, reproductive failure, altered morphology and growth rates and changes in behavior. Pesticides can indirectly impact wildlife through reduction of food resources and refuses, starvation due to decreased prey availability, hypothermia and secondary poisoning. Section 1602 of the California Fish and Game Code governs requirements for permitting of any project where pesticides will be used, and strictly regulates the disposal of all waste and run-off. It is imperative to know the regulations and to abide by them, or heavy fines will ensue!
Using Pesticides in a Regulated Market
Knowing which pesticides you can’t use, to avoid failing mandatory state testing, is just as important as knowing which ones you can use safely to pass required testing. Most states with regulated markets have strict limitations on the pesticides that can be used in cannabis cultivation. Pesticide use in the cultivation of cannabis is the most strictly regulated in the agriculture industry; the pesticides allowed for use in cannabis cultivation are far more limited than any other crop.
Photo: Michelle Tribe, Flickr
Just because a product is certified organic does not mean that it can be used, or that it is safe to be consumed or ingested. Oftentimes when cannabis flower alone is tested it will not fail or show a detectable amount of pesticides or heavy metals. However, when that flower is turned into concentrates, banned substances are then detected in testing, leading to test failures.
Cannabis cultivation facilities that are located on land that was previously used for conventional agriculture, or located near vineyards or other agricultural crops that are heavily sprayed with harmful pesticides, run a very high-risk failing testing. This is because of either spray drift from nearby agriculture, or residual pesticides and heavy metals left in the soil from previous crops that were using pesticides banned for cannabis cultivation. Accordingly, if you’re going to be growing outdoors or in a greenhouse, it is imperative that you get a soil and water test prior to cultivation, so you can determine if there is any potential for test failures due to pesticides or heavy metals in the soil or water in that area.
Proper Application – Using the Right Tools in the Right Way at the Right Time
One of the most important factors in pest management is proper identification of pests and proper application and coverage of pesticides. It does not require an entomology degree to identify insects, these days there is a lot of information online that can help you identify cannabis pests. Proper identification of insects can make the difference between success and failure. With a good eye and a microscope, if you do your research, you can control most insects in your garden.
In order to control pests in your garden you must get proper coverage of the foliage of the plant when you are applying pesticides. There are different types of equipment that are commonly used to apply pesticides in cannabis cultivation: backpack sprayers, foggers, and airless paint sprayers are the most common. An alternative method involves using an automated dosing system such as a dosatron, which injects fertilizer or pesticides at a specific ratio into your water lines, allowing you to use only the exact amount of pesticide you need. That way you avoid wasting money on unused pesticides. It is also safer for employees because it minimizes employee exposure, since there is no mixing required, and it allows for a large volume to be sprayed, without refilling a tank or a backpack sprayer.
No matter what you are using you must ensure you get the proper coverage on your plants in order to control pests. The temperature and humidity of your cultivation area, as well as the PH and temperature of the pesticide solution, all factor into the success of your IPM. For example, PFR 97 needs to be applied at a higher humidity range, around 70% to be most effective. In some areas this is not possible so repeated applications may be required to ensure the application is effective. A high PH or alkaline PH can cause alkaline hydrolysis which will make your pesticide solution less effective and will dictate how long your pesticides remain effective after they are mixed. It is therefore important to use your pesticide solution as soon as you make it; don’t let it sit around for long periods of time before use or it will be less effective.
In cannabis cultivation there are two different primary growth cycles: vegetative and flower. These cycles require different IPM strategies. In general, during the flowering cycle, pesticides should not be applied after the second week, with some limited exceptions i.e. for outdoor cultivation there is a longer window to spray since the flower set takes longer than a plant being grown inside, or in a light deprivation greenhouse, where there is a 12/12 flowering cycle.
Starting with an immaculate vegetation room is crucial to maintaining pest and mold free plants in the flowering cycle.
For the vegetative (non-flowering) cycle, a strict rotation of foliage spray applications targeting not only pests, but also molds and pathogens, will be necessary to avoid a quick onset of infestation. Starting with an immaculate vegetation room is crucial to maintaining pest and mold free plants in the flowering cycle. Preventative sprays that are safe for use include: safer soap (contact kill) for soft bodied chewing insects; Regalia (biological control) for powdery mildew; and PFR 97 (biological control) for soft bodied chewing insects. It is also helpful to spray kelp, which strengthens the cell walls of plants, making the plant healthier, and thus enabling the plant to better defend itself from pests and diseases. Also, Bacillus thuringiensis (Bt) is useful to prevent or kill caterpillars.
The best way to control a pest infestation in the flowering cycle is at the very beginning on day one. You must start aggressively, with a three-way control consisting of a contact kill and preventative during days 1-14; preventative and biological control during days 10-18; and then release predator bugs on day 25, for optimal results. Knocking back the population with an effective contact kill pesticide early on is essential to ultimately lowering populations throughout the grow cycle, so that you can spray a biological control to preclude them from returning, before you release the predatory bugs at the end of the cycle.
Biological controls can take anywhere from 3 to 10 days before they are effective. Biological pesticides are selected strains of bacteria or fungus. When the plant tissue is eaten by a targeted pest, the bacteria kills the pest from the inside providing control without having to spray pesticides repeatedly. Predator bugs are the last line of defense, used in late flowering. They can be used indoors, outdoors and in greenhouses. An example of a common predator bug is Amblyseius californicus used to control low populations of spider mites, but there are many different varieties and they are specific depending on the type of pest population you seek to control.
A common concern with the use of predatory bugs, is whether they will be present when the flowers are harvested. However, if there is no food for the bugs (i.e. pests) the predator bugs will leave in search of food elsewhere. Further, indoor predator bugs are usually very small in size and difficult to see to an untrained eye. It is very unlikely to see any signs of predator bugs near the end of the flowering cycle, or in the finished flower product. Even when using bigger predator bugs, the bugs will leave the plants when harvested and dried.
Having pests can be very stressful. It is not uncommon to have bugs, pests, rodents, animals and birds cause damage in cannabis gardens. Making an informed decision based on science and not on unproven assumptions can determine how successful you are at pest management. There are many factors that go into pest management and no one situation is the same. You must be dedicated and consistent; pest management never stops. You will always have something ready to invade your garden. Prepare, plan, prevent and repeat!
On Wednesday, March 25, the United States Senate approved an estimated $2-trillion stimulus package in response to the economic impact of the COVID-19 outbreak. The legislation, formally known as the “Coronavirus Aid, Relief, and Economic Security Act” (or the CARES Act), was approved by the Senate 96-0 following days of negotiations. One of the most highly anticipated provisions of the CARES Act, the “recovery rebates” for individuals, will provide a one-time cash payment up to $1,200 per qualifying individual ($2,400 in the case of eligible individuals filing a joint return) plus an additional $500 for qualifying children (§6428.2020(a)). The CARES Act, which remains subject to House approval, also prescribes an additional $500 billon in corporate aid, $100 billion to health-care providers, $150 billion to state and local governments and $349 billion in small business loans in an effort to provide continued employment and stabilize the economy. The legislation further provides billions of dollars in debt relief on existing loans.
CARES Act – Paycheck Protection Program
Under the CARES Act, small businesses who participate in the “Paycheck Protection Program” can receive loans to cover payroll expenses, group health care benefits, employee salaries, interest on mortgage obligations, rent, and utilities (§1102(F)(i)). To qualify for these small business loans, businesses must employ 500 employees or less, including all full-time and part-time employees (§1102(D)). Eligible recipients must also submit the following as part of their loan application: (i) documentation verifying the number of full-time equivalent employees on payroll and applicable pay rates; (ii) documentation verifying payments on covered mortgage obligations, payments on covered lease obligations, and covered utility payments; and (iii) a certification that the documentation presented is true and the amounts requested will be used to retain employees and make necessary payments (§1106(e)). The CARES Act delegates authority to depository institutions, insured credit unions, institutions of the Farm Credit System and other lenders to provide loans under this program (§1109(b)). The Treasury Department will be tasked with establishing all interest rates, loan maturity dates, and all other necessary terms and conditions. Prior to issuing these loans, lenders will consider whether the business (i) was in operation as of February 15, 2020, (ii) had employees for whom the business paid salaries and payroll, or (iii) aid independent contractors as reported on a Form 1099-MISC (§1102(F)(ii)(II)).
What Does This Mean for Cannabis Businesses?
Due to the continued Schedule I status of cannabis (excluding hemp) under the Controlled Substances Act (CSA), cannabis businesses are not eligible to participate in the Paycheck Protection Program intended to keep “small businesses” afloat during the current economic crisis. Because federal law still prohibits banks from supporting marijuana businesses, financial institutions remain hesitant to service the industry, as anti-money laundering concerns and Bank Secrecy Act requirements (31 U.S.C. 5311 et seq.) are ever-present. As a result, even if cannabis businesses technically qualify to receive federal assistance under the Paycheck Protection Program, they will face an uphill battle in actually obtaining such loans.
Cannabis Businesses Are Also Precluded from “Disaster” Assistance
Moreover, the conflict between state and federal law continues to prevent cannabis business from receiving assistance from the U.S. Small Business Administration (SBA) under the Coronavirus Preparedness and Response Supplemental Appropriations Act (H.R. 6201). In light of the COVID-19 outbreak, the SBA revised its “Disaster Loan” process to provide low-interest “Disaster Loans” to eligible small businesses. To qualify for these loans, a state must submit documented business losses for at least five businesses per county. The problem, however, is that the SBA still refuses to assist state-legal cannabis businesses in equal need of small business loans. Specifically, in a 2018 Policy Notice, the SBA reaffirmed that cannabis businesses – and even some non “plant-touching” firms who service the cannabis industry – cannot receive aid in the form of federally backed loans, as “financial transactions involving a marijuana-related business would generally involve funds derived from illegal activity.” The 2018 Policy Notice clarified that the following business are ineligible to receive SBA loans:
(a) “Direct Marijuana Business” — a business that grows, produces, processes, distributes, or sells marijuana or marijuana products, edibles, or derivatives, regardless of the amount of such activity. This applies to personal use and medical use even if the business is legal under local or state law where the applicant business is or will be located.
(b) “Indirect Marijuana Business” — a business that derived any of its gross revenue for the previous year (or, if a start-up, projects to derive any of its gross revenue for the next year) from sales to Direct Marijuana Businesses of products or services that could reasonably be determined to support the use, growth, enhancement or other development of marijuana. Examples include businesses that provide testing services, or sell grow lights or hydroponic equipment, to one or more Direct Marijuana Businesses. In addition, businesses that sell smoking devices, pipes, bongs, inhalants, or other products that may be used in connection with marijuana are ineligible if the products are primarily intended or designed for such use or if the business markets the products for such use.
More recently, the SBA provided further clarification that cannabis businesses are not entitled to receive a cut of the federal dollars being appropriated for disaster relief because of the CSA’s continued prohibition of the sale and distribution of cannabis. Last week, the SBA reiterated that:
“With the exception of businesses that produce or sell hemp and hemp-derived products [federally legalized under the 2018 Farm Bill], marijuana related businesses are not eligible for SBA-funded services.” (@SBAPacificNW)
Consequently, because of the continued Schedule I status of cannabis under federal law, cannabis businesses will not be entitled to receive Disaster Loans from the SBA, regardless of whether they qualify as a struggling small business.
Resolving the Issue
While the federal government has been considering legislation, such as SAFE Banking and the STATES Act, to create a more rational federal cannabis policy, neither of these bills are likely to pass any time soon given the current COVID-19 pandemic.
At the end of the day, until Congress passes some form of federal cannabis legalization, these small businesses will remain plagued by the inability to receive financial assistance, as evinced by the Paycheck Protection Program.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
Doctors will be able to prescribe the drug more normally and for more conditions. And patents will have more access.
