According to a press release published yesterday, Steep Hill Hawaii announced the opening of their second location on the Big Island. Their first location located on Oahu and operating for a little over a year, was the first cannabis-testing laboratory to be certified by the State of Hawaii Department of Health (HDOH). It’s also the first ISO/IEC 17025:2005 accredited cannabis testing lab in the state.
Owner and CEO of Steep Hill Hawaii, Dana Ciccone announced the second location yesterday. “”We are thrilled to open up our new location in Kailua Kona, Hawaii,” says Ciccone. “We have been working closely with the Department of Health and we look forward to working together with the large patient population and the two new dispensaries opening very soon.” Ciccone says with the new location they are focusing on quick turnaround times, good service and competitive prices.
According to Dr. Andrew Rosenstein, CEO of Steep Hill, they want to help provide safe medicine and quality testing to the Hawaii medical cannabis community. “In extending its services, Steep Hill Hawaii is committed to providing safe medicine and high quality testing to Hawaii’s patient community,” says Rosenstien. “Dana and the Steep Hill Hawaii team have worked hard to open up this new location and will continue to support cultivators and dispensaries in this emerging market.”
The Food Safety Consortium, taking place November 13-15 in Schaumburg, Illinois, will host a series of talks geared towards the cannabis industry this year. The newly launched Cannabis Quality Track features a number of panels and presentations designed to highlight the many intersections between food safety and cannabis.
Jenna Rice, Director of Operations at Gron Artisan Chocolates
The track will have presentations discussing food safety planning in cannabis manufacturing, HACCP, GMPs, regulatory compliance and supply chain issues among other areas.
Ben Gelt, board chair of the Cannabis Certification Council, is moderating a panel titled What’s In My Weed? that will delve into issues like supply chain, production and other difficulties in creating cannabis products and the challenges inherent in teaching consumers to be more discerning.
Ben Gelt, Board Chair of the Cannabis Certification Council
Kimberly Stuck, Founder of Allay Compliance Consulting
Ben Gelt and the Cannabis Certification Council orchestrated the development of this panel to help promote their #WhatsInMyWeed consumer awareness and education campaign. “The Cannabis Certification Council believes consumer education campaigns like #Whatsinmyweed are critical to drive standards and transparency like we see in food,” says Gelt. “What better place to discuss the food safety challenges the cannabis industry faces than the Food Safety Consortium”
Before Kim Stuck founded Allay Compliance Consulting, she was the first Marijuana Specialist for a public health authority in the nation, where she was working with regulators in Denver, Colorado. She is currently a cannabis food safety expert and a Certified Professional of Food Safety (CP-FS) through NEHA. She has helped Colorado and California develop cannabis food safety requirements. “I will discuss pitfalls we have experienced in the regulation of cannabis in Denver and what mistakes not to make,” says Stuck. “I’d also like to talk about how to be prepared for when those regulators start to come in to facilities.”
Kristen Hill, MIP Director at Native Roots Dispensary
Kristen Hill is the MIP Director at Native Roots, arguably one of the largest dispensary chains in the world. She oversees 30 employees in Native Roots’ MIP facility where product testing and quality assurance of products are all led under her guidance. Her background includes managing quality assurance and regulatory compliance with FDA regulations, among other areas. She said she’s particularly excited to talk about implementing manufacturing best practices in the cannabis space. “Cannabis is maturing and is beginning to shape operations around long standing best practices in other industries,” says Hill.
Leslie Siu, Founder and CEO of Mother & Clone
Leslie Siu brings to the panel 17 years of liquor, tobacco and pharma marketing and operational oversight plus global digital and experiential campaigns. Her company, Mother & Clone, produces infused, sublingual cannabis sprays. Based in Colorado, Mother & Clone’s team of biochemists are Merck alumni, currently working towards GMP standards in preparation for Canada, slated to be on shelf in the spring of 2019. Her main consideration for cannabis product development comes from what she has learned from the FDA in traditional industries- what they will and will not tolerate.
There are going to be some states that are less progressive in the pro-cannabis movement, the same way there were states that were slow to move past alcohol prohibition. This is normal for any country moving towards change, better economic standing and safer healthcare.
There are only four states that completely ban recreational and medical cannabis altogether, and those states are Idaho, Kansas, Nebraska, and South Dakota. Although, there is no doubt that more and more states are moving towards a pro-recreational and medical cannabis stance. There are some states in the Northeast that are making strides to legalize cannabis.
Most of the states in the Northeast already have some form of medical cannabis law in the books already, but some are moving towards recreational legalization surprisingly quickly. Massachusetts already has legalized recreational cannabis and is setting up their regulatory framework currently while Vermont, New Jersey and New York, all of which already have medical laws, appear to be just steps away from legalizing it recreationally.
Northeast States Moving Towards Legalization
With Canada’s recent recreational legalization, a number of states just south of the border appear to be eyeing the issue for themselves. While some of these states have somewhat strict regulations in place, they look like promising emerging market opportunities.
New Jersey
New Jersey is closer than ever to legalizing recreational cannabis. Governor Phil Murphy built his campaign on the pledge to end cannabis prohibition. Murphy says having recreational cannabis legalized this year is his goal.
Murphy says that he wants legal recreational cannabis to be available because he believes it is a way to improve social justice in New Jersey and to bring the state new tax revenue. The biggest issue is what the legislation will look like and how it can be tied to expanding the states medicinal cannabis program.
New Jersey Governor Phil Murphy
Their current medical program, while still small in market size, appears to be gaining steam and growing in terms of patients getting access. Six months ago, The New Jersey Department of Health added a number of qualifying conditions patients can get a cannabis prescription for. The program still has its limits, like a 10% THC potency cap, small selection of types of products and other various restrictions.
New York
It was just last year when Governor Andrew Cuomo said cannabis was a “gateway drug” and he was opposed to legalization. After conducting a study on cannabis legalization, the result was a July Health Department report that determined the positive effects of legalization outweighs the potential negative impacts.
The debate between Andrew Cuomo and Cynthia Nixon in the gubernatorial race has highlighted their views of cannabis as well as other important issues; it’s important that New Yorkers vote in the primary election to have the best opportunity for the future.
Companies with large amounts of capital are planting their flags in New York, like MedMen’s dispensary in Manhattan, even if the medical market might still be in its infancy.
MassachusettsOver the next six months, this market will be one to watch closely
Recreational cannabis became legalin the last couple months for Massachusetts, while the state legalized medical cannabis some time ago. Their medical program is relatively advanced compared to New York or New Jersey. Online registration, a large number of qualifying conditions, and a less restrictive business environment seemed to encourage a much larger number of patients and businesses supporting them.
Regulators in Massachusetts are currently consideringthe option of allowing delivery operations for the recreational market. The roll out for the recreational industry might seem somewhat slow, but regulators are tackling a wide range of issues and making considerable progress towards the highly anticipated recreational market opening. Just last week, regulators issued licenses to two cannabis-testing laboratories, and, according to the Boston Globe, the debut could be just weeks away.
While the industry and regulators get ready for the recreational debut, a recent crackdown on pesticide usehighlighted some of the growing pains that come with it. Over the next six months, this market will be one to watch closely as dispensaries begin selling recreational cannabis and the industry develops.
Vermont
The recent Canadian legalization of recreational cannabis will no doubt put pressure on states sharing a border with them to consider adjusting their laws.
Legalizing recreational cannabis will likely increase tourism to Vermont, the way other states saw an influx in tourism when they legalized. Unfortunately, Vermont has only decriminalized recreational cannabis. You can possess, grow and consume cannabis, but you can’t buy or sell it, which obviously restricts the ability of any business to enter the market.
Vermont Statehouse, Montpellier, VT Image: Tony Fischer, Flickr
However, their legal medical program is relatively laissez-faire compared to other states in the region. They allow for cultivation at home or through a caregiver and there are a number of small businesses working under the legal medical program.
Maryland
Recreational cannabis isn’t legal in Maryland yet, but medical cannabis has been legal since 2014. It’s illegal for patients and caregivers to grow their own. Attempts have been made to make recreational cannabis in 2016, but the bill didn’t move forward.
Maryland’s industry was off to a rocky start, when the application process for businesses wanting to enter the market slowed to a crawl. This month, the state just approved four new medical dispensaries and one new processor for the market. The latest round of approvals brings the total to 69 dispensaries serving patients, while back in 2016, the state pre-approved 102 dispensaries originally.
Delaware Expect to see another attempt at legalizing via the legislature in early 2019.
The Delaware Department of Health will continue to accept applications for medical cannabis cards, which is required for patients seeking to obtain their medicine from a compassion center. Patients are not allowed to grow their own cannabis. The state’s program has been operational for quite a while, and a small number of companies have established footprints in the state, like the Israeli brand Tikun Olam.
Pennsylvania
In 2016, Pennsylvania legalized medical cannabis. In contrast to some of the other states discussed earlier, PA is off to a more streamlined start. The second phase of their medical program allowed for more businesses to enter the market, a wider range of qualifying conditions and a larger number of patients registering. The industry is maturing here fast and could make for an exciting opportunity with recreational legalization potentially on the horizon.
The bill would call for the immediate release of people jailed for cannabis-related crimes. This would also allow anyone with a criminal history related to cannabis to have that expunged.
If the bill passes, the tax imposed is estimated to generate $500 million a year.
Cannabis businesses must not only protect their investments in their technical creations, but also must protect their brand identities. A cannabis producer can invest heavily in making a desirable, high-quality product, and can advertise and sell this product so as to generate customer interest and goodwill, but if the customer cannot distinguish the producer’s product from that of its competitor, this investment is for not. Trademarks become unenforceable when they are no longer distinctive.
A trademark provides its owner with the right to have the Court stop another entity from using the trademark, or using a similar trademark in a way that confuses the public. When the trademark is infringed, the Court can also make a monetary award in favor of the trademark owner.
Trademarks are identifiers of a particular source of manufacture and they can take virtually any form. Trademarks can be words, phrases, symbols, names, designs, letters, numbers, colors, three-dimensional shapes, holograms, moving images, modes of packaging, sounds, scents, tastes, textures, or any other distinguishing element. What a trademark cannot be is a mere descriptor of the goods or services themselves because such a trademark would prevent other entities from describing their products in their ordinary terms.
Trademarks can be registered, but they do not have to be. In choosing a trademark, the cannabis producer must balance competing impulses: the desire to choose a trademark that is suggestive of the product itself so as to have an immediate meaning to customers without need of an expensive marketing campaign; and the desire to coin a unique and striking trademark which is instantly eye-catching and memorable, but which must be advertised before customers can understand the product to which it refers.
For example, a depiction of cannabis leaf or a word that plays on the ordinary terms used to refer to cannabis will not make a strong mark that can be enforced against those who adopt something similar. On the other hand, a coined word, such as “Kodak”, may have no independent association with cannabis but, after a time, use of this mark in association with a cannabis product can create a very strong mark with a wider ambit of exclusivity.
All that said, even a very suggestive mark can serve as a trademark where the use of the mark is so longstanding and ubiquitous that the suggestive mark acquires a secondary meaning as an indicator of its source of manufacture. Cannabis producers can and should also consider adopting specific colors, scents or tastes of their products as trademarks, where appropriate.
Trademarks become unenforceable when they are no longer distinctive. For this reason, trademark owners must keep abreast of any use of trademarks similar to their own by third parties, and must act quickly to either license such uses or to restrain them.Cannabis businesses have been very busy applicants for trademarks. More than 1700 such applications are now on file, though a comparative few have yet been registered.
Trademarks can be registered, but they do not have to be. When a company’s product or service becomes known to its customers or potential customers with reference to a mark through ordinary business use, a trademark has been created.
Registration does however provide certain advantages. Under the amendments to the Trademarks Act coming in 2019, a registered trademark can be obtained for without any proof of use or goodwill. By contrast, and as noted above, an unregistered mark must be used and possess goodwill before it can be said to exist at all. A registered trademark provides protection for its owner across Canada. An unregistered trademark can only be enforced in the geographical area in which its owner has established its reputation. A registered trademark is protected from those who use it in a manner that is likely to depreciate the goodwill of the trademark. An unregistered trademark only protects against consumer confusion.
Registration under the Trademarks Act also makes it an offence to sell goods or services on a commercial scale in association with another’s registered trademark, or to traffic in infringing labels. Further, a trademark owner can request that the import or export of such goods in Canada be arrested. No similar rights accrue for unregistered trademarks.
Finally, a registered trademark is published at the CIPO web site, providing notice of its existence to new market entrants before these entrants commit to using a similar trademark. Unregistered marks are not always easily discovered and a new market entrant may commit to a mark before having any opportunity to discover that it is the unregistered trademark of another.
Registering a trademark is straightforward. The applicant prepares an application that identifies the applicant, the trademark and the goods and/or services with which the trademark is being used or is intended to be used. Once satisfied that the application complies with the Trademarks Act, CIPO publishes the application to allow potential opponents of the registration to come forward. If there is no opposition, or if an opposition proceeding is brought and dismissed, the trademark is issued.
There is an interaction between the Trademarks Act and the Plant Breeder’s Rights Act. As discussed above, when a denomination has been adopted for a plant variety under the Plant Breeder’s Rights Act, nothing similar can be adopted or registered as a trademark. This is so other traders may use the denomination in their sale of the variety after expiry of the plant breeder’s right.
Cannabis businesses have been very busy applicants for trademarks. More than 1700 such applications are now on file, though a comparative few have yet been registered. Trademark applications in this area are likely to increase further with the coming changes to the Trademarks Act and the removal of the requirement that applicants show use of the trademark prior to registration. Companies will be encouraged to apply for trademarks they may only be considering using, and for any trademarks that they think their competitors may be planning to use. There is some concern that the changes to the Trademarks Act will lead to the rise of trademark trolls.
Before adopting a particular trademark, the producer must do what it can to minimize the likelihood that a third party will assert that the trademark infringes the third party’s prior rights. Searches of Canadian and international trademarks, particularly United States trademarks, are advised. National intellectual property offices, such as CIPO and the United States Patent and Trademark Office, maintain easily searchable databases of registered and applied-for trademarks that should be reviewed. Search professionals can also assist in identifying trademarks that have never been the subject of a trademark application. With the result of the searches in hand, the cannabis producer can determine whether or not to proceed to adopt the contemplated mark and invest in its promotion.
In Part 5, Naiberg will explain how to use a copyright to protect works of creative expression. Stay tuned for more!
No matter the size of your cannabis greenhouse operation, keeping your plants alive and healthy requires the best possible growing environment. This means greenhouse managers and personnel must frequently monitor the status of environmental conditions and equipment. The sooner someone discovers extreme temperature fluctuations, rising humidity or equipment failure, the more inventory you can save.
Cloud-based remote monitoring system in protective enclosure
That’s why integrating a remote monitoring system into your greenhouse operation can save you time, money and anxiety. Monitoring systems that use cloud-based technology let you see real-time status of all monitored conditions and receive alerts right on your mobile device.
Installing a monitoring system and sensors can be easier than you might think. Here are answers to ten questions to ask before installing a cloud-based monitoring system:
What is required to use a remote monitoring system?
Most remote monitoring systems require an internet or WiFi connection and access to an electrical outlet. Programming is done through a website, so it’s easiest to use a computer for the initial setup. If you don’t have an internet connection at your location, you’ll want to choose a cellular system. Make sure that there’s sufficient signal strength at your site, and check the signal quality in the area before purchasing a cellular device.
2. How do we determine what kind of monitoring system and sensors we need?
A reputable manufacturer will have a well-trained support team that can assess your needs even without a site visit to determine which products are best for your application. If you feel you need them to check out your greenhouse operation,many companies can set up a video conference or FaceTime chat to substitute for being on site.
You will want to provide details about the scope and purpose of your cannabis growing operation. Important factors to discuss include:
Skeletal structure of the greenhouse (metal, plastic, wood, etc.) and the covering material (glass or plastic).
Floor space square footage and height of each of your greenhouses.
Number of greenhouse structures in your operation.
Outdoor climate to determine if you rely more on heating or air conditioning and the level of humidity control needed.
Space dedicated to phases of growth (cloning and propagation, vegetative, flowering) and the microclimates needed for each.
Types of lighting, ventilation and irrigation systems.
Level of technological automation versus manual operation in place.
The monitoring system representative will then determine the type of system that would best serve your operation, the number of base units you will need and the types of sensors required.
Temperature display provides quick view of sensor data
The representative should also be able to provide tips on the placement of the sensors you’re purchasing. For example, to ensure thorough air temperature coverage, place sensors throughout the greenhouse, next to the thermostat controlling the room temperature and in the center of the greenhouse out of direct sunlight.
Note that there shouldn’t be a cost for a demo, consultation or assistance throughout the sales process. Be sure to ask if there are any fees or licenses to keep using the monitoring equipment after you purchase it.
3. Are sensors included with the monitoring system?
In most cases, sensors are sold separately. The sensors you select depend upon the conditions you want to monitor and how many you can connect to your base unit. Certainly, temperature is critical, but there are many other factors to deal with as well, such as humidity, CO2, soil moisture, water pH, power and equipment failure, ventilation and physical security.
For example, humidity has a direct impact on the photosynthesis and transpiration of plants. High humidity can also cause disease and promote the growth of harmful mold, algae and mildew. Sensors can detect changes in humidity levels.
Water pH sensor
Like any other plant, cannabis needs CO2 to thrive, so it’s a good idea to include a CO2 sensor that will signal to the monitoring device when readings go out of the preset range. There are even sensors that you can place in the soil to measure moisture content to help prevent over- or underwatering, budget water usage costs, promote growth and increase crop yield and quality.
Of course, all the critical systems in your growing facility—from water pumps to irrigation lines to louvers—rely on electrical power. A power outage monitoring sensor detects power failure. It can also monitor equipment for conditions that predict if a problem is looming, such as power fluctuations that occur at specific times.
Ventilation systems not only help control temperature, they also provide fresh air that is critical to plant health. Automated systems include features like vented roofs, side vents and forced fans. Sensors placed on all these systems will send personnel an alert if they stop running or operate outside of preset parameters.
To monitor the physical security of your greenhouses, you can add sensors to entrance doors, windows, supply rooms and equipment sheds. During off hours, when no staff is on duty, you can remain vigilant and be alerted to any unauthorized entry into your facility.
4. Do monitoring systems only work with the manufacturer’s sensors?
Not necessarily. For example, certain monitoring units can connect with most 4-20mA sensors and transmitters regardless of the brand. When selecting sensors, you might have a choice between ones that are designed by the manufacturer to work specifically with the monitoring system or universal components made by a third party. If the components aren’t made by the system manufacturer, you’ll want to find out if they have been tested with the monitor you are choosing and if you need to work with another vendor to purchase the parts.
A humidity sensor mounted in a weatherproof enclosure
5. Is a monitoring system easy to set up, or do we need to hire an electrician?
Many monitoring systems are quick and easy to install, and users can often set them up without hiring an outside expert. Look for one that requires only a few simple physical installation steps. For example:
Mount the device to the wall or somewhere secure;
Plug it into an electrical outlet and an internet connection;
Connect the sensors.
You connect the sensors to the base unit’s terminal strip using wire, which is included with many sensors. The range of many wired sensors can be extended up to 2,000 feet away from the base unit by adding wire that can be easily purchased at any home store. It’s a good idea to hire an electrician if you need to run wires through walls or ceilings.
Usually, once you plug in the device and connect the sensors, you then create an account on the manufacturer’s designated website and begin using your device. There should be no fee to create an account and use the site.
If the manufacturer doesn’t offer installation services, ask if they can recommend a local representative in your area who can set up your system. If not, make sure they provide free technical support via phone or email to walk you through the installation and answer any questions you might have about programming and daily usage.
6. Is there a monthly fee to access all the functionality of a monitoring device?
Many web- or cloud-based systems provide free functionality with some limitations. You might have to purchase a premium subscription to unlock features such as text messaging, phone call alerts and unlimited data logging access.
7. Should we get a system that is wired or wireless? Will we need to have a phone line, cable, internet or something else?
Wireless can mean two different things as it relates to monitoring: how the system communicates its data to the outside world and how the sensors communicate with the system.
The most popular systems require an internet or WiFi connection, but if that’s not an option, cellular- and phone-based systems are available.
A hardwired monitoring system connects the sensors to the base device with wires. A wireless system uses built-in radio transmitters to communicate with the base unit. Some monitoring systems can accommodate a combination of hardwired and wireless sensors.
8. Can one system monitor several sensor inputs around the clock?
Once the monitoring system is installed and programmed, it will constantly read the information from the sensors 24/7. Cloud-based systems have data logging capabilities and store limitless amounts of information that you can view from any internet-connected device via a website or app.
If the system detects any sensor readings outside of the preset range, it will send an alarm to all designated personnel. The number of sensors a base unit can monitor varies. Make sure to evaluate your needs and to select one that can accommodate your present situation and future growth.
When a monitoring system identifies a change in status, it immediately sends alerts to people on your contact list. If you don’t want all your personnel to receive notifications at the same time, some devices can be programmed to send alerts in a tiered fashion or on a schedule. Multiple communications methods like phone, email and text provide extra assurance that you’ll get the alert. It’s a good idea to check the number of people the system can reach and if the system automatically cycles through the contact list until someone responds. Some systems allow for flexible scheduling, so that off-duty personnel don’t receive alerts.
9. Do monitoring systems have a back-up power system that will ensure the alarming function still works if the power goes out or if someone disconnects the power?
The safest choice is a cloud-based system that comes with a built-in battery backup that will last for hours in the event of a power failure. Cloud-based units constantly communicate a signal to the cloud to validate its online status. If the communication link is interrupted—for example by a power outage or an employee accidently switching off the unit—the system generates an alarm indicating that the internet connection is lost or that there is a cellular communications problem. Users are alerted about the disruption through phone, text or email. All data collected during this time will be stored in the device and will be uploaded to the cloud when the internet connection is restored.
If you opt for a cloud-based monitoring system, make sure the infrastructure used to create the cloud platform is monitored 24/7 by the manufacturer’s team. Ask if they have multiple backups across the country to ensure the system is never down.
10. What should we expect if we need technical support or repairs to the system?
Purchase your system from a reputable manufacturer that provides a warranty and offers full repair services in the event the product stops working as it should. Also, research to make sure their tech support team is knowledgeable and willing to walk you through any questions you have about your monitoring system. Often, support specialists can diagnose and correct unit setup and programming issues over the phone.
It helps to record your observations regarding the problem, so the tech team can look for trends and circumstances concerning the issue and better diagnose the problem. Ideally, the manufacturer can provide loaner units if your problem requires mailing the device to their facility for repair.
Just a couple weeks away, the California Cannabis Business Conference, taking place in Anaheim, CA October 22-23, will host a series of panel discussions where attendees can expect to learn from industry leaders on a variety of topics. As businesses in the state adjust to new regulations and the market matures, one particular topic seems to highlight a challenging new space: distribution.
Track 1 at the CA Cannabis Business Conference, Distribution, Retail and Delivery, will begin early afternoon on Monday at the show, where a panel discussion titled State of Cannabis Distribution: Scaling Cannabis Distribution and Expectations of a Distributor, will tackle a range of issues involving logistics and supply chain management in California’s cannabis industry.
Michael Wheeler, vice president of Policy Initiatives at Flow Kana, will host the panel, joined by Chris Coulombe, CEO of Pacific Expeditors, Jesse Parenti, programs director of Nine Point Strategies and Brian Roth, vice president of sales at KUDU Technologies. According to the agenda, the session will cover inventory management, shipping and transport, managing product data, order fulfillment, manifest creation and reporting on it all. Michael Wheeler says regulatory compliance is one issue they plan on discussing. “Currently the biggest pressure on compliance is the desire by some operators to live under the proposed regulations, instead of the current emergency regulations,” says Wheeler. “Add to this recently signed legislation and we have lots of opportunistic actions each with their own perception of compliance.”
Another important topic they plan on discussing is driver training and hiring practices. According to Chris Coulombe, drivers are one of the top two most important customer-facing teams in the organization. “Between the sales team and the fleet operation, drivers represent half of the face of your company,” says Coulombe. “Much like the sales team, they interface with your retail partners directly, and subsequently provide a sizable portion of the foundation that retailers will use to judge your company’s competency and efficiency.”
Chris Coulombe, CEO of Pacific Expeditors
When hiring new drivers, Coulombe recommends the standard background and driver record checks, but urges looking for experience in sales and driving as well. “Find those that have leadership experience and are comfortable operating in quasi-structured environments,” says Coulombe. “To that end, we seek solution oriented candidates that are personable, experienced in troubleshooting on their feet, and understand how to operate inside the structure of an organization.”
Coulombe also emphasizes the importance of driver training in any distribution company. “We built our driver training from scratch based on collective experiences from the military,” says Coulombe. “However, creating this from scratch is not necessary at this point, some insurance companies, such as our broker, Vantreo, provide in house driver training and certification solutions as a risk mitigation measure for companies that they represent. We recommend speaking with your insurance company to find what packages they have available.” Proper training for your drivers can help increase efficiency in operations, decrease maintenance and insurance costs and provide for better employee engagement. Coulombe also says many insurance companies have standard operating procedures for drivers to help supplement your company’s protocols.
The Food Safety Consortium, taking place November 13-15 in Schaumburg, Illinois, will host a series of talks geared towards the cannabis industry this year. The newly launched Cannabis Quality Track features a number of panels and presentations designed to highlight the many intersections between food safety and cannabis.
The track will have presentations discussing food safety planning in cannabis manufacturing, HACCP, GMPs, regulatory compliance and supply chain issues among other areas. One particular topic of interest in the quality and safety of cannabis products is laboratory testing. At the event this year, leading laboratory accreditation bodies in the country will sit together on a panel titled Accreditation, Regulation & Certification: Cannabis Labs and Production.
Laboratories that are new to the industry and looking to get accredited should be aware of the new ISO/IEC 17025:2017 standard, which was released last year. According to Tracy Szerszen, labs that have already been accredited to the 2005 version will be required to transition to the 2017 version by November 29, 2020. “This can be done in conjunction with routine assessments scheduled in 2019 and 2020,” says Szerszen. “However, laboratories are cautioned to transition within a reasonable timeframe to avoid their 17025: 2005 certificate from lapsing prior to the transition deadline. Some of the changes to the standard include but are not limited to: the re-alignment of clauses similar to ISO 9001:2015 and other ISO industry standards, modifications to reporting and decision rules, the addition of risked based thinking and a new approach to managing complaints.” Szerszen, along with the other panelists, will go much more in-depth on changes to the new ISO 17025 and other topics during the panel at the Food Safety Consortium.
Some of the other topics the panel will discuss include:
ISO/IEC 17025 –what’s expected, benefits of accreditation, common deficiencies, updates to the new 17025 standard
Standards available for production facilities-GMPs & GFSI standards
How standards can be used to safeguard the quality of production and safety requirements
An open discussion with panelists from leading accreditation bodies on the state of cannabis lab testing
Christopher Gunning, life sciences accreditation manager with A2LA
According to Chris Gunning, many states are requiring accreditation to ISO/IEC 17025, the standard used throughout the world in many other high-profile industries such as the testing of food and pharmaceuticals, environmental testing, and biosafety testing. “In an industry where there are few standard methods, where one hears that you can ‘pay to play,’ and where there are ‘novice’ laboratories popping up with little experience in operating a testing laboratory, it is extremely important to have an experienced, independent, 3rd party accrediting body evaluating the laboratory,” says Gunning. “This process confirms their adherence to appropriate quality management system standards, standard methods or their own internally developed methods, and can verify that those methods produce valid results. Ultimately, the process of accreditation gives the public confidence that a testing laboratory is meeting their state’s requirements and therefore consumers have access to a quality product.” He says most states with legal cannabis recognize the need for product testing by a credentialed laboratory.
Lauren Maloney, food safety program accreditation manager, Perry Johnson Registrars Food Safety, Inc. (PJRFSI)
Another important topic that the panel will address is the role of food safety standards in the cannabis industry. Lauren Maloney says cannabis product manufacturers should consider GMP and HACCP certifications for their businesses. “Food safety is important to the cannabis industry because although individual states have mandated several food safety requirements there still considerable risks involved in the production of cannabis products,” says Lauren Maloney. “Consumers want the assurance that the cannabis products are safe and therefore should be treated like a food product. Because FDA does not have oversight of these production facilities, third party certification is essential to ensure these facilities implement a robust food safety system.”
In A Culture of Food Safety: A Position Paper (2018), the Global Food Safety Initiative (GFSI) defines food safety culture as the “shared values, beliefs, and norms that affect mind-set and behavior toward food safety in, across, and throughout an organization.” In other words, food safety culture in your workplace is the “this is how we do things around here.”
A food safety culture needs to be relentlessly communicated – everyone needs to know it is his or her job, not just a dusty slogan on the wall or a whisper down the halls.Building a strong food safety culture is particularly relevant to the cannabis workplace because of the unique history of the workers and the unique needs of the consumers. The cannabis industry is special in that it was an industry before it became regulated. As such, there are many workers in the industry who have a deep passion for cannabis products, but with experience rooted in working within only a few official standards. Thus, the behavior and mind-set of workers in the cannabis industry must adjust to new regulations. However, even currently, standards are ever changing and vary from state to state; this causes further confusion and inconsistency for you and your workers. On top of that, now that cannabis is legalized in certain pockets, cannabis reaches a larger, wider audience. This population includes consumers most vulnerable to foodborne illness such as people with immunocompromised systems, the elderly, the pregnant or the young. These consumers in particular need and deserve access to safe cannabis products every experience. Therefore, it is that much more important to develop a strong food safety culture in the workplace to promote safe, quality cannabis large-scale production for the larger, wider audience.
To achieve a food safety culture, GFSI emphasizes the vision and mission of the business, the role of the leaders in the organization, and the continuity of communication and training. GFSI also emphasizes that these components are interrelated and all are needed to strengthen a food safety culture. Food safety culture components can be simplified into: 1) things you believe, 2) things you say, and 3) things you do.“this is how we do things around here.”
Things You Believe
Food safety culture starts from the top, with the executive team and senior managers. It is this group that dictates the vision and mission of the business and decides to include food safety and quality as a part of this guiding star. Moreover, it is this group that commits to the support for food safety by investing the time, money and resources. The message then has to spread from the executive team and senior managers to an interdepartmental team within the workplace. That way, the values of food safety can be further shared to front-line workers during onboarding and/or continuous training. To restart a food safety culture, a town hall can be a useful tool to discuss priorities in the workplace. Overall, it is important to have every worker believe in producing safe food and that every worker is a part of and has ownership of contributing to the food safety culture at your workplace (GFSI, 2018).
Things You Say
A food safety culture needs to be relentlessly communicated – everyone needs to know it is his or her job, not just a dusty slogan on the wall or a whisper down the halls. The Food and Drug Administration (FDA) has a saying that “if it’s not written down, it didn’t happen.” Thus, the guidelines for a food safety culture need to be embedded in the policies, programs and procedures; and these guidelines need to be a part of training from day one and supplemented with periodic reminders. For effectiveness, make the communication engaging, relevant and simple – use your workers to pose for posters, use digital tools such as memes. In his presentation at the 2015 Food Safety Consortium, Frank Yiannas, vice president of food safety at Walmart, says “How many of you created training videos that you show the desired behavior once? You should probably show the behavior more than once and by a few different employees so that when they see it, they see multiple people in the video doing it and that’s the social norm.” By sending a consistent message, a food safety culture can flourish in your workplace.A food safety culture does not happen once; a food safety culture is a long-term commitment with continuous improvement.
Things You Do
A food safety culture does not happen once; a food safety culture is a long-term commitment with continuous improvement. Periodic evaluation of food safety metrics and alignment with business goals contribute to maintaining a food safety culture – it is useful to learn from successes as well as mistakes. In the same presentation mentioned above, Yiannas discusses “Learning from the wrong way [mistakes] lessens the likelihood that we will become complacent” where he defines complacency as “a feeling of quiet security, often while unaware of some potential danger or defect that lurks ahead.” Without the constant commitment, businesses can falter in their food safety and cause costly mistakes – whether that be recalls or illnesses or worse. By not becoming complacent and emphasizing constant accountability, a food safety culture can thrive at your workplace and make your workplace thrive.
With the regulated cannabis industry still in its infancy, the time is now for every cannabis workplace to instill a food safety culture. Before being mandated, the cannabis industry can rally for food safety because it is the right thing to do. With participation from each workplace, the industry as a whole can be united in producing safe product and be better positioned to change stigmas.
77 laboratories from 18 states and two foreign countries participated in the bi-annual Emerald Test, an inter-laboratory comparison and proficiency testing (PT) program. The program is a tool for labs to demonstrate their competence to existing clients, potential customers, regulatory agencies and accreditation bodies.
Overall, the company shipped 314 PT samples, with the majority in a hemp or hemp oil matrix. According to the press release, the new PTs including potency in hemp oil, STEC, Aspergillus Mold and Mycotoxins attracted a good deal of labs. “Many laboratories have been regular participants which speaks volumes about their commitment to quality assurance, regulatory compliance, and consumer safety,” says Ken Groggel, director of Emerald Scientific’s proficiency testing program. “The collegial attitude of open communication and shared experience increases our knowledge and ensures continued success for all involved. Our goal is to establish an industry benchmark for cannabis testing while providing valuable feedback to each laboratory’s quality assurance system.”
This marks the first time the Emerald Test used two potency PTs- the original in solution and a new hemp oil matrix. “Of the 62 labs that participated in the Potency PT, 48 took the PT in solution with 47 receiving an Emerald Badge,” reads the press release. “Another 23 labs took the PT in hemp oil, with 22 awarded an Emerald Badge. Nine labs took both PTs.”
39 labs took PTs in APC, Total Coliform, E. coli, Enterobacteriaceae and Yeast/Mold and 38 of those received the badge. 45 reported results for Salmonella and 42 of them were able to correctly identify the contaminated sample. 12 labs took the Aspergillus Mold PT and 11 of them were awarded the badge. 24 participated in the pesticides PT and 19 of them met criteria for the badge, while four of them did not report results.
The press release noted that the pesticides and residual solvents in hemp oil PTs were some of the more challenging tests in the spring program. 43 labs reported results for the residual solvents in hemp oil PT and only 31 received badges. The terpenes in hemp oil PT was also a challenging test where 21 labs participated and only 11 received the badge, marking the lowest passing rate of all the PTs.
The advisory panel for The Emerald Test consists of chemists, accreditation providers, laboratory owners, and other industry experts to keep it representative of industry needs. “The Emerald Test is the most comprehensive testing program in the world for the cannabis industry, but as the market grows more testing will be needed,” says Groggel. “We intend to continue introducing new proficiency tests while expanding the menu of matrix choices in response to laboratory requests and regulatory requirements.”
According to the press release, their fall program is open for enrollment until today. Testing begins in mid-October.
With all the attention on the pending regs for the recreational industry in Canada plus the huge medical market under construction in the EU, it is easy to forget the other cannabis discussion in the room right now. Namely CBD in commercial food ingredients and supplements. Battles in the beauty space, while surfacing, are still much less avidly fought.
As a result, edible CBD is also rapidly becoming (another) big green elephant in the room. Globally. Starting with all the changing rules about mostly medical use of cannabinoids in general.
In Europe, however, this is already a different animal.
The regulatory hammer also appears to be coming down in strategic country markets, with strange hybrid fights and issues emerging as a result.
For example, as cannabis crops (designed for both markets) begin to flourish in Spain buoyed by both the clubs in Barcelona and the growth of legitimate medical and other kinds of cannabis cultivation across the country – and much of that for export, authorities are cracking down on a federal level about labelling of not cannabis bound for clubs, but the CBD used in edibles.
In the last month, CBD industry blogs are reporting that the Spanish government is sending both warning letters to distributors and the police are apparently taking products off of shelves directly.
For all the direct showdowns about the cannabis plant this year, not to mention CBD, including British children ending up in hospital, this has got to make the top five list.
A Brief Modern History Of CBD Controversies On The Continent
The current complications have their roots in both the regulation of medical cannabis, health supplements and what are called “novelty” food items.
The food issue has been cooking for several years and for botanicals and additives far from cannabidiol. This year, on January 1, however, the entire EU brought in a new directive about the use of certain plants in food which seems to be affecting the edible cannabis conversation all over the continent. That said, countries are interpreting the same at different speeds and with different enthusiasm.
The EU looks poised to hop on the legalization train
Switzerland (not a member of the EU) is actually the only country on the European continent where so far, things have gone relatively smoothly. Their lack of EU membership is actually why. This also does not mean they have overcome some of the larger problems inherent in this entire discussion, but, if things go to form, it will be relatively drama free.
That is not the case in other places.
For example, at the end of 2016, British authorities made a splash about medical labelling with the Medicine and Health Care products Regulatory Agency (MHRA) also leaving the entire edibles discussion in limbo. Technically, low strength CBD can be sold in the UK but it must be labelled as a food product if not specifically made for the medical market. That flap is likely to take off again with the direct competition now of not only Tilray but Namaste and the changing scheduling of cannabis in the UK to a Schedule II in October. See the recent furore over the “unauthorized claims” supposedly made by the nascent Cannabis Trades Association in meeting, lobbying if not “working” with local authorities. The organization has literally blossomed within the last 18 months to over 300 members and 1,200 sellers in part to figure out what exactly the rules are, as authorities grapple with changing times.
Now jump the channel to Spain. The international focus of late has not been just the medical cannabis now sprouting in greenhouses owned by established pharmaceutical companies, or that bound for semi medical use in Barcelona, but the entire CBD edibles discussion.
Why?
On some levels, it is clearly an attempt to continue to set less than grey rules for the Spanish cannabis industry, which even in the club scene is regulating. But beyond that, this fight is altogether more complicated, and far from just regional, or even just a Spanish conversation.
European Food Regulation Meets The Cannabis Industry
CBD in edible products will, according to European regulation, make it a novel food or “additive” – namely that products containing the cannabinoid have not been used “safely”. Translated into English that crosses cultural boundaries, this definition really means that the substance in question must have been part of a regulated federal procedure – for at least 25 years in any third country. As such, it will have to be tested and regulated accordingly.In other words, until the EU can move to classify CBD as a novel food, in Spain, CBD products on the market must be labelled “external use only.”
One does not have to be an industry analyst to know this clearly excludes all parts of the cannabis plant. Everywhere. This is why the situation now unfolding in Spain is all the more worrying for the industry across Europe.
In Spain at least, the crackdown appears to be on any food item containing cannabis, which, according to European-wide regulations, has yet to be classified as a “novel food.” Namely, a food product which has not been consumed in a significant degree in the EU before May 15, 1987. See the guide for new applicants here.
In other words, until the EU can move to classify CBD as a novel food, in Spain, CBD products on the market must be labelled “external use only.”
Where Does This Leave The CBD Industry Across Europe?
As any manufacturer or vendor in any EU country could technically be required to register their new food, this means that cannabis producers and distributors in Europe need to be on their toes for the next several years as the regulatory schemata is worked out. Bottom line? Expect as much hullabaloo over this sector of the market as other places (even if over other issues).Both producers and distributors could easily face labelling problems
Here is the critical take-away. Regulation is coming to the entire industry in Europe in a way unseen in both Canada and the U.S. and from a much more granular perspective.
What “reigns in Spain” in other words right now, is a wake-up call for CBD producers across the continent, even if not involved in the medical space. Not to mention both U.S. and Canadian producers (in particular) looking for profitable market entry strategies. Labelling and standards, in other words, are clearly on the way, and beyond the drawing board, for all cannabinoids, not just those of the “medical” kind.
In the meantime, edible CBD products in Europe and in every country are ripe for the institution of new guidelines that are, as yet, formalized. Both producers and distributors, therefore, could easily face labelling problems for all their CBD products and product lines for the next several years.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
Owner and CEO of Steep Hill Hawaii, Dana Ciccone announced the second location yesterday. “”We are thrilled to open up our new location in Kailua Kona, Hawaii,” says Ciccone. “We have been working closely with the Department of Health and we look forward to working together with the large patient population and the two new dispensaries opening very soon.” Ciccone says with the new location they are focusing on quick turnaround times, good service and competitive prices.
