Tag Archives: vape

Vaporizer Technology Innovation & Hanu Labs

By Aaron Green
No Comments

Conduction heating is a method used in most dab rigs and vape pens that relies on heating concentrate or flower on a metal surface to vaporize cannabis compounds for consumption. Care must be taken with conduction heating to avoid overheating the material, resulting in combustion or decomposition. Convection heating (think of heating food in an oven) can also be used to vaporize cannabis compounds and has the benefit of being able to control the heating temperature of the material more precisely.

Hanu Labs recently announced the launch of their Hanu Labs EVO Petra. The tabletop device leverages their convection heat-based Perpetual Heat Thermal Technology, which avoids combustion while efficiently extracting the desired compounds from cannabis flower or concentrates.

Prior to becoming the CEO of Hanu, Ricardo worked in sales at Jetty Extracts where he helped to build the Northern California territory. Ricardo is also a classically trained French chef who used to run a cannabis tourism company in California.

Aaron Green: How did you get involved in the cannabis industry?

Ricardo Willis, CEO of Hanu Labs

Ricardo Willis: I moved to California in 2016. I was a professional chef at the time and had just finished up my master’s degree after eight years of schooling. My business partner and I decided we wanted to get into the cannabis space. So, we started a cannabis tourism business. Cannabis tourism wasn’t in the Bay Area at the time. We were kind of first and we were about two years ahead of legalization. We ran a few tours and we started to get into the cannabis game. I found out I didn’t know as much as I thought I did about cannabis. So, I decided to go and work for Jetty Extracts and that eventually led to where I’m at today.

Green: What was your motivation for joining Jetty?

Willis: Education. I knew about flower, but I did not know as much about the manufacturing process. I was first exposed to concentrates in San Francisco and I was really fascinated by it. I wanted to learn more, because I knew that this was going to be the wave at the time. Coming from the east coast, I had never seen a vape pen. So, I come out to Cali, and I see all these different dabs and I’m like, “I need to know more about this.” Jetty was an opportunity for me to educate myself while also helping them build their Northern California division that had only been around for a few years, and they were trying to expand. It was a great opportunity working for those guys, I learned a lot.

Green: I got a chance to see the Petra in action last night. It’s a bit different from your standard dab rig. Can you talk about the standard dab conduction heating versus the Petra and convection heating?

The mica-encapsulated chamber and heating element

Willis: Think about your standard dab rig in the sense of taking a hot plate and dropping your dab onto that hot plate. It just sits there and begins to bubble and then evaporate from the heat. With the Petra, you take in all those same components, but you’re putting the concentrate into this mica-encapsulated chamber, where you have an all-glass air path that is one of the best surfaces for heating, and one of the safest. Those components with our perpetual heating system allow the dab rig, when we drop that nail in or we drop a basket for flower, that convection air circulates around the actual product. The oil begins to sublimate, or the vapor begins to make it through the flower, and it releases all those molecules that are found in the cannabis plant. And because of our glass air hydro tubes, when you pop those on, it basically filters it through water, and gives you one of the fastest and cleanest hits you’ve ever experienced.

Green: You mentioned flower as well as concentrates. Am I correct in hearing that you can also use flower with the Petra?

Willis: Yes. Dual functionality was one of the things found in our original model, the Vape Exhale that we first released nine years ago. I think that that’s very important for products. If a customer is going to spend anywhere between $300 to $500 retail, you need to give them more bang for their buck. Being able to vaporize flower and concentrates fits for the markets that we’re going into. People are consuming flower and concentrates at about the same percentage rate. So, we want to make sure that our devices can give the customer the ability to do both, either at home or on the go.

Green: So, you worked in the cannabis tourism industry. One of the trends we’ve got coming up in California is consumption lounges. How do you see the consumption lounges evolving over time? What are the challenges you see in California?

Willis: It’s a little different in Southern California versus Northern California. We’ve had consumption lounges in San Francisco, as well as Oakland for the past three years. We outfitted the entire lounge with VapeExhales at Barbary Coast, one of our early clients that we work with, which is downtown San Francisco. For us, we knew this is a space that would be thriving.

The Hanu Labs EVO Petra

I’m a big fan of the lounges, because I think people need a safe place where they can go to smoke. Those lounges offer that to people. It also gives them a chance to experiment with different technology and actually test it out before purchasing. Because of my hospitality and restaurant background, I’m always looking for the opportunity for people to become repeat customers. If you offer these things like consumption lounges, instead of people going to bars, they end up at your lounge after work. I think that is something that’s going to continue to grow.

I do think some of the challenges are going to be around single servings. A person doesn’t need to buy a full gram. Maybe they just need to buy a quarter of a dab or something like that. Companies will need to identify those potential pain points in that process, and then offer those smaller products that can be enjoyed while at the lounge.

Green: There’s a certain experience around the Petra. Where it’s really like a centerpiece of the table. How did you think about designing the user experience and designing around that conviviality?

Willis: That’s a great question. For the Petra, what we decided to design was slightly different from the VapeExhale. With the VapeExhale, the purpose of the device wasn’t super obvious, but the Petra has more of a centerpiece design. I’m a big fan of technology, so when I was designing the Petra, I was thinking about the KitchenAid mixer. That may seem strange, but the KitchenAid mixer is something that as a cook, either at home or in a restaurant, they own these things literally for 20 years. It has a very long product life. I wanted the Petra to be the same. I wanted it to look more like an appliance, I wanted it to be built with stability and durability so that when the customer purchases that product, it becomes a centerpiece that they can set up. If your grandkids come in, they see your vaporizer, it becomes more of an educational opportunity, and less about feeling embarrassed about your cannabis pieces. So, for me, design is all about ease of use, but also being appealing to the eye. The Petra is its own show, and it deserves to make a splash.

Green: What in your personal life or in cannabis are you most interested in learning about?

Willis: I am very interested in the customers. I started off in customer service when I was around 16 years old. The one thing that I learned is that the customer is the most important part of the sales cycle. I think that sometimes people focus on the B2B side and making our business partners happy, but my focus is, and always will be on the customers. I need to understand what customers want and how they want it. I’m intrigued by the science behind customer acquisition and want to learn more about how to make my customers happy. If they want cheaper pricing, I’m going to find a way to develop products to give them what they want at the price point they want. There is always going to be a customer who wants premium, or mid-tier or a customer who just wants something fully functional. Maybe they want something that provides the right experience for them, and they don’t have to break the bank to get it.

Green: Thanks Ricardo. That concludes the interview.

Willis: Thanks, Aaron.

Recent Developments in Cannabis Vaping Product Safety – A Q&A with Corey Mangold, CEO of PurTec Delivery Systems

By Aaron Green
No Comments

Vaping is a multi-billion dollar cannabis product category representing more than 20% category share in the US, according to a recent Headset.io report. The 2019 vaping crisis, whereby lung injury and several deaths were caused by the adulteration of vapor pen cartridges with vitamin E acetate, highlighted the importance of safety and emissions testing for vapor pen products. In addition to volatile organic compounds, metals and ceramics contained in the heating elements of cartridges are also a concern. While the FDA has a robust program for emissions testing in nicotine products, they do not currently regulate cannabis. Cannabis vaping is currently regulated at the state level in the United States.

Cannabis vaping is popular among minors owing to its discrete nature. In a recent study published in the Journal of the American Medical Association (JAMA), 14.7% of teens reported vaping cannabis in 2018. In a separate research study, University of Michigan researchers found that teens vaping cannabis were two times more likely to experience respiratory issues than teens who smoked e-cigarettes.

We spoke with Corey Mangold, CEO and founder of PurTec Delivery Systems, to learn more about cannabis vaping safety and their PurGuard technology. Prior to entering the cannabis space, Corey founded a software company in 1998. He also founded the advertising agency Gigasavvy in 2008, which he recently exited from in March 2021.

Aaron Green: How did you get started in the cannabis industry?

Corey Mangold: I got started in the cannabis industry in 2016. My daughter was away at college in San Luis Obispo and got pregnant and was going to have a baby, which obviously I was excited about. I decided to have her come down to Southern California and start a company together, as I’ve done multiple times in my career successfully. I wanted to show her the ropes, and teach her everything from finance to HR, to business development, marketing – everything it takes to be successful – and give her the tools that she would need to be successful for her life.

Green: What kind of things were you into before 2016?

Mangold: I founded my first company in 1998 in the software industry and had that company up until 2005. In 2008 I started another company called Gigasavvy, a nationally recognized advertising agency out of Irvine, California, which I successfully exited in March of 2021.

Corey Mangold, CEO and founder of PurTec Delivery Systems

When deciding to start a company with my daughter, we were interested in the cannabis industry – I think everybody was back in 2016. In 2016, I had started using cannabis again after probably about a 16- or 17-year hiatus. I was using a vape because I had children in the house. I went to literally anywhere I could and bought every type of cartridge on the market. What I found was that their user experience was not like what it was on the nicotine side of vaping. I reached out to associates of mine who had been manufacturing vapes since 2011, starting with the blue e-cigarette, and we engineered a unique device that was proprietary and completely unlike anything on the market. It was incredible, and still to this day, I think it’s probably the best 510 thread cart on the market. We launched that under the Orchid Essentials (CNSX: ORCD, OTC:ORVRF) brand in California and Oregon.

Green: Is that cart something that you sell to other brands as well, or is it purely for the Orchid brand?

Mangold: Yes, purely for the Orchid brand, but it’s what inspired me to start PurTec Delivery Systems. After a few years of struggling in this industry because we didn’t have the access to capital needed – Orchid is a US company traded on the Canadian Stock Exchange (CSE:ORCD, OTC:ORVRF) – and dealing in a substance that’s federally illegal, there was no access to any traditional financing, be it factoring or inventory financing. We were literally creating as much product as we could every month and then selling out almost instantly, and then waiting till the next month to get money in from all our accounts to make more. We had to slug it out. We did get into a little over 500 stores in California and Oregon, but it was just a battle, and I didn’t really want to be touching cannabis.

In 2020, I had a breakthrough in my strategy. I was watching the TV show Gold Rush and I watched one of the guys go and have to buy a new wash plant. He pulls up to this dealer’s yard that sells wash plants and tractors. I saw this dealer had a lot of inventory and clearly a lot of money, and I realized the place to make money was selling the shovels, not really digging for gold. I said to myself if I have the best shovel out there, why am I digging? I should just be innovating new shovels and selling shovels. Hence, I started PurTec Delivery Systems and now for the last year and a half have been 100% focused on developing advanced vaporizer technologies.

Green: Tell me more about PurTec.

Mangold: I founded PurTec with the sole intention of creating safe vaporizers for consumers. We conducted an 18-month safety study in Switzerland with our partners, on vaping devices in the market. I learned a lot of things that I already knew but wanted to see it proven by independent laboratories and by PhDs and MDs, and really see what was so concerning to me. For the last year and a half, we have sought to develop a safe line of vaporizers. I’m very cognizant about what’s going on in my body and want to know what’s going on internally with these products. I don’t think anyone would be using them if they knew what was really going into their lungs.

Green: What are some of the things that consumers should be thinking about when it comes to vape safety?

Mangold: Consumers should be thinking about all the different aspects from inhaling vaporized heavy metals to ceramics. Ceramic particle inhalation is one of my biggest concerns. I think it’s been ignored. I think all the manufacturers know about it and I think it’s been swept under the rug. I think it’s one of the threats that we have. There should be regulatory bodies that are out there protecting consumers like the FDA, hence why I believe federal legalization is so important, because if the FDA was involved not even one of these products would be on the market because the first thing the FDA would do would be very extensive emissions testing to find out what compounds and potential toxins are entering into your body.

Green: There’s clearly a need for safety and regulation in the space, but from where you’re sitting, is there a demand? When consumers go into a store, one of their main focuses is: what’s the THC content? How do you see consumer demand for safety and how do you think about building that awareness?

Mangold: I don’t think there is consumer demand yet. The consumer demand right now is for getting medicated and having fun or getting whatever relief or primary reason you use cannabis. I can point to a direct correlation with the opioid epidemic. No one knew they were as horrible as they are, and doctors were prescribing them left and right, and everyone thought it was okay. People think these cannabis products are okay because they’re on the shelf in every licensed dispensary, and the California Department of Health and the Department of Health in every other state and country has been involved to some degree. So, consumers think that they’re safe. The problem is they’re likely not just like we weren’t with opioids.

I don’t think the consumer demand will be there for quite some time until we start seeing a lot of long-term health impacts where we start seeing people getting lung disease, we start seeing people getting iron lung, different potential brain issues from inhaling adhesives and heavy metals. I think once the health impacts are seen clinically – just like we saw with the opioid crisis – once that was really in the forefront, everybody saw with their own eyes, and then they were aware that there was a problem. So, I think that it’s important to become aware of the potential health impacts, but I think it will take quite some time before that happens.

Green: It sounds to me like you want to get ahead of the industry on this because if it does go federally legal, there will be more stringent requirements. How do you think about that from a product design and development perspective to get ahead of a problem that exists but isn’t reflected in current regulations?

Mangold: The best thing we can do right now in the cannabis vape industry is to look at what the nicotine vape industry is doing. It is controlled by the FDA and there are standards for vaporizers in other parts of the world that are very stringent, like the AFNOR standards, which are in the European Union regulations for vaporizer safety.

What we do is we find the most stringent standards in the world, and we test our products to those standards. If the standards get stricter, we can develop our products and re-engineer them to meet those new requirements. Right now, all our products are emissions tested at AFNOR standards and over-engineered even for those standards. We also are constantly working on reduction of potentially hazardous materials: reductions of heavy metals; only using proven safe and effective materials and FDA approved materials like SAE 316L surgical stainless steel; and using improved ceramics that are not as brittle as the ceramics being used by almost every single manufacturer out there. There’s a lot of things that can be done. It takes supply chain management, understanding the technology and having strong solid teams of scientists and doctors that know this stuff much better than anyone else in the industry does, and leveraging their expertise.

Green: You recently launched a safety feature for minors. Can you tell me more about that?

Mangold: Yes. Two weeks ago, we launched a new software application called PurGuard. PurGuard is a massive innovation and is the first of its kind that we’re aware of. It’s a piece of software that pairs with any device, whether it’s a disposable pod system or a 510 cartridge. You then pair it to your phone and take a picture of your government ID. Then the camera looks at your face, runs quick facial recognition and runs an age check through the largest age-checking platform API in the world. Then based on location and legal age of the user’s location – some states are 18 and different countries have different rules – it validates your ability in your market to be consuming that product. This technology works in 180 different countries.

Once that occurs and the device is ready for you to use, we have another feature that we’ve developed. There is an auto-lock feature that we have where if you’re a parent, like me, and you have kids in the house, you can turn your device to auto-lock right from your phone. When you walk away from your phone and are 10 feet away, your Bluetooth connection will break, and it will automatically lock the device and so your child can’t walk into your bedroom and take your device.

This technology is important to us. Consuming cannabis is horrible for the health of minors. There are serious mental effects on brain growth that occur from using cannabis at a young age because the brain is still developing up until about the age of 23 to 25. So, it’s not safe for them to be using. Of course, I’m sure we all smoked when we were in high school, but the ease of use of vape and the discretion, I think allows minors to use significantly more cannabis than previous generations did 20, 30, 40 years ago. It’s a massive problem right now and I think it’s just a matter of time before the FDA requires such protections. This industry can only survive if we protect minors. So, we’re getting ahead of the curve and setting the standard.

Green: What kind of hardware does PurGuard work with?

Mangold: PurGuard works with every single type of device that we manufacture: 510 thread cartridges, disposables, and pods. If it’s a 510-thread cartridge, the battery has to be a PurTec battery, and the cartridge has to be a PurTec cartridge. They communicate to each other through certain technologies, and it can even recognize what oils are in the cartridge or the pod or the disposable. Moreover, we can tell what strain it is, when it was manufactured, what the potency levels are and more. It records all the usage statistics. We’ve also proven with our hardware, the actual milligram contents being consumed per hit, or draw based on volume, and draw duration. We can track and report to people and say, “Hey, you’re consuming 100 milligrams of THC a day, that’s too high, you need to slow down and maybe go down to 50 milligrams a day.” That will be what is required as it is being required in the nicotine industry under the FDA pre-market tobacco applications (PMTA). When the FDA comes into cannabis, they’re going to want to see the same thing. They’re going to want to know that cannabis products are not promoting people to use more, and they are trying to get people to use less. It doesn’t mean stop using it, but use it in moderation, like everything in life. You shouldn’t be drinking a bottle of whiskey a day. You probably shouldn’t be smoking a pound of weed a day either. Everything in life is moderation and this application not only protects minors but also teaches us about our consumption habits.

Green: A theme here is “skating where the puck is going to be.” What kind of trends are you looking at right now in the industry?

Mangold: The biggest trend I see right now in the industry is disposables. We’ve seen that the trends in cannabis consumption trail behind the nicotine industry by 2-4 years. We see a lot of our customers and potential customers shifting into disposables and are now seeing a very large spike in sales of disposables. I think that’s a big trend, but with that comes another major issue: we now have lithium-ion batteries being thrown away at astonishing rates and going into landfills. PurTec has an answer for that that we’ll be launching here in the next four to six months That will be I think the biggest innovation in regards to eco-friendliness within the vape industry. That’s where I see things going right now.

Green: What are you most interested in learning about?

Mangold: The thing that interests me most, and what I’m most interested in learning about is regulations. Not the regulations themselves, but how regulations are drafted. I’ve sat in several meetings with rules committees for different regulatory bodies throughout the United States and it is laughable. I was recently in a state I’m not going to mention. I asked them what scientists and what doctors they have consulted with and they said none. I just found that dumbfounding. The state regulatory bodies are making decisions without doing due diligence and without bringing in subject matter experts in some cases.

I’m very interested in learning about how we can change our regulatory bodies. Taxpayers pay these salaries and their job at the end of the day is to protect consumers. I think that these cannabis regulatory bodies need to be way more involved with their state’s Department of Health, as well as with the FDA, and National Institute of Health and looking at this as a holistic approach. How do we protect consumers? This is a drug. It’s like anything else out there. If you’re selling tomatoes that were sprayed with a certain pesticide, you must do the research and you have to know what’s in that product before you start putting it in people’s hands. Otherwise, you may have people dying left and right. So, I’m very interested in learning more about regulatory bodies and how they need to evolve and hopefully I can help push them into evolving sooner rather than later.

Green: Great, that concludes the interview, Corey.

Mangold: Thanks, Aaron.

The Craft of Extraction: Like Beer Making, It’s All About Control

By Jeremy Diehl
No Comments

Any brewmaster from the more than 7,000 U.S. craft breweries will tell you one of two things: That their art is a science, or that their science is an art. The answer might depend upon the brewer’s individual approach, but a combination of experience, process, precise measurement and intuition is exactly what’s required to create great beer. In a very similar way, the cannabis industry has its own version of the brewmaster: Extraction technicians.

A cannabis extraction technician deploys knowledge from multiple science disciplines to apply industrial solvents, heat and pressure to plant matter through a variety of methods with the aim to chemically extract pure compounds. Extraction techs use their passion for the cannabis and hemp plants, combined with chemistry, physics, phytobiology and chemical engineering to help create a result that’s not quite art, but not quite completely science. By manipulating plant materials, pressure, heat and other variables, the extraction technician crafts the building block for what will become an edible, tincture or extract.

Similarly, brewmasters use their knowledge of multiple science disciplines like chemistry and microbiology, as well as different brewing processes and a variety of ingredients to develop creative recipes that result in consistent, interesting beers. The brewmaster’s work is both science and art, as well. And they also manipulate plant materials, pressure, heat and other variables to achieve their desired results.

Author Jeremy Diehl collects cannabis extract from equipment for testing

“I would certainly consider brewing to be an art and a science, but it takes a very disciplined approach to create consistent, yet ever evolving beers for today’s craft market,” says Marshall Ligare, PhD. Research Scientist at John I. Haas, a leading supplier of hops, hop products and brewing innovations. “We work to ensure brewers can create something different with every new beer, as well as something that helps create an experience as well as a feeling.”

In both brewing and extraction, the art comes in the subjective experience of the craftsman and his or her ability to curate the infinite possibilities inherent in each process. However, both are a science in their requirement of establishing production methodologies that guarantee a consistent, reliable product experience every time to win customer loyalty (and regulatory compliance). In the same way hops determine recipes for beer flavors, the cannabis plant determines extraction recipes, especially considering the role that terpenoids play in the quality, flavor and effects of the end product.

The development of new and appealing cannabis products is beginning to mimic the vast variety of craft beers now found all over the world. In the same way beer connoisseurs seek out the perfect stout, lager or IPA, discriminating cannabis consumers now search for that gem of a single-origin, specialty-strain vaporizer oil or irresistible dab extract.

“I see an exciting new day for quality-focused, craft extraction that tells a story, not only of where the cannabis plant might have been grown and how, but also the care that was taken in the processing of that strain into smokable or edible oil,” says John Lynch, Founder of TradeCraft. “Imagine the impact in the marketplace when product-makers figure out how to do seasonal one-offs where engaged connoisseurs are willing to pay a premium for the art behind limited releases.”

In the same way hops determine recipes for beer flavors, the cannabis plant determines extraction recipes

In either process, you’re essentially creating art with science. Each process works with different strains. Each is concerned with chemical and flavor profiles. Each has its own challenges. In both worlds, quality depends upon consistency. You’re creating art, but you need to replicate that art over and over – which can only occur with strict control of the process. Brewmasters seek control of things like yeast quantity and health, oxygen input, wort nutritional status and temperature, among other things. In their pursuit, extraction technicians seek to control temperature, pressure and flow rate–as well as all the ways these variables interact with each other. What enables this control in both efforts is the equipment used to achieve results.

“A modern brewhouse is very much like a scientific laboratory,” Ligare says. “Brewers treat their setup with the same care and attention a scientist gives to their lab equipment, and are equally concerned with precision, cleanliness and the purity of the result. With each new beer, they want to develop a process that can be controlled and replicated.”

The key to creating a precise process is to use instrument-grade extraction machinery that performs to specifications – and allows you to repeat the process again and again. The value of using high-quality instrumentation to manage and monitor either the brewing or extraction process cannot be overstated. Although it seems counterintuitive, this is where the “craft” comes into play for both brewing and cannabis extraction. Precise instrumentation is what allows the brewer or extraction “artist” to manipulate and monitor the conditions required to meet recipe standards. Along with the quality of the ingredients (hops, cannabis, hemp, etc.), the quality of the equipment utilized to create the product is one critical element impacting the end result. “Imagine the impact in the marketplace when product-makers figure out how to do seasonal one-offs where engaged connoisseurs are willing to pay a premium for the art behind limited releases.”

In cannabis extraction, a second crucial decision is determining which solvent is the best solution for the recipe you’re using and the end result you’re hoping to achieve. This decision is a part of the “craft” of extraction, and determined according to a combination of criteria. There’s no question that each solvent has a business case it serves best, and there is ongoing debate about which approach is best. But overwhelmingly, the solvent that best serves the most business needs is CO2 due to its inherent versatility and ability to have its density tuned to target specific compounds.

“Control is what makes or breaks any craft product,” says Karen Devereux, Vice President of Northeast Kingdom Hemp. “We’re based in Vermont and love how Vermont is known for its quality craft beer, cheese and maple syrup. We wanted to bring that craft approach to hemp extraction, and everyone knows that any craft endeavor is focused on the details and getting them right again and again. You can’t do that without controlling every aspect of the process.”

Greater control of the process can also open up worlds of discovery. The inherent “tunability” of CO₂ enables the extraction technician to target specific compounds, enhancing the potential for experimentation and even whimsy. This can lead to entirely new products much in the way a brewer can control his process to create new, interesting beers.

American portrait photographer Richard Avedon famously declared that art is “about control,” describing the artistic process as “the encounter between control and the uncontrollable.” The same can be said for beer making and cannabis extraction. The more precisely you can control variables, the more options you’ll have for yourself and your customers. The more choices you’ll have with regard to different recipes and products. And the more loyalty you’ll ultimately generate among fans of your products.

Advancements in Extraction & the Growth of the Concentrate Category

By Dr. Dominick Monaco
No Comments

Due to quick progressions in legalization, today’s cannabis industry bears little resemblance to the industry of five years ago. As the cannabis space gains mainstream acceptance, it resembles more “traditional” industries closely. In turn, how we consume cannabis has changed dramatically within this novel legal framework.

A brief visit to a cannabis dispensary quickly illuminates just how much the industry has changed in the past few years.

Within the dynamic of modern cannabis, perhaps no vertical has seen the same advancements as cannabis extracts. It’s precisely the growth of the concentrate category that has given rise to the many branded products that define the legal market.

To give a clear picture of how advancements in extraction have stimulated the concentrate category’s growth, we put together this brief exploration.

Standards & Technology

extraction equipmentBefore legalization, the production of cannabis extracts was a shady affair done in clandestine and often dangerous ways. Especially concerning BHO (Butane Hash Oil), home-based laboratories have long since been notorious fire hazards. Even more, with a total lack of regulation, black-market extracts are infamous for containing harmful impurities.

In the few short years that cannabis has been legal in Nevada, Washington and other states, extract producers have adopted standards and technology from more professional arenas. By borrowing from the food and pharmaceutical industries, concentrate companies have achieved excellence undreamed of a decade ago.

Good Manufacturing Practices

One of the essential elements in the extracts vertical advancements is the adoption of good manufacturing practices. According to the World Health Organization website, “Good Manufacturing Practice (GMP) is that part of quality assurance which ensures that products are consistently produced and controlled to the quality standards appropriate to their intended use.”

When adult-use cannabis was legalized in markets such as Colorado, cannabis companies were able to come out of the shadows and discuss GMPs with legit businesses. In doing so, they implemented professional controls on extract manufacturing in accordance with “quality standards” of state regulatory agencies.

Supercritical CO2 Extraction

As cannabis businesses adopted GMP from other industries, extract producers also embraced more sophisticated technology. Of these, supercritical CO2 has pushed the cannabis concentrates vertical into the future.

IVXX processingAccording to the equipment manufacturer Apeks Supercritical, “CO2 is considered to be a safer method of extraction because the solvent is non-volatile. The extract is purer because no trace of the solvent is left behind. It is also versatile and helps protect sensitive terpenes, by allowing cold separation.” By deriving methods from food production, supercritical equipment manufacturers have given cannabis companies a viable option for the commercial production of extracts.

Supercritical technology has helped push the concentrates vertical forward by providing a clean and efficient way to produce cannabis extracts. Nonetheless, supercritical CO2 equipment is highly sophisticated and carries a hefty price tag. Producers can expect to pay well over $100,000 for commercial supercritical CO2 extraction setup.

Products

Just as standards and technology have evolved in the cannabis extracts vertical, we have also seen products rapidly mature. Notably, the legal environment has allowed manufacturers to exchange ideas and methods for the first time. In turn, this dialogue has led to the development of new products, like isolates and live resin.

Isolates

Just as the name implies, isolates are concentrates made from a singular, pure cannabinoid. In today’s market, CBD isolates have grown increasingly popular because people can consume pure CBD without ingesting other cannabinoids or plant materials, including the legal 0.3% THC found in hemp.

Isolates are made by further purifying cannabis extracts in the process of purification, filtration and crystallization. As seen with other concentrates, isolates are used as the base for many cannabis products, such as gummies.

There is also growing interest in CBG isolate, which is another non-psychoactive cannabinoid when consumed orally.

Live Resin

The cannabis concentrate live resin has taken the industry by storm over the past few years. Live resin is a form of extract that is originally sourced from freshly harvested and frozen cannabis plants. The primary selling point behind this extract is the fact that fresh flowers produce much more vibrant aromas and flavors than dried cannabis. Interestingly, this pungency is tied to the preservation of terpenes in live resin.

Just a few of the dozens of various products types on the market today.

To make live resin, producers “flash freeze” fresh cannabis plants immediately after harvest. Valuable cannabinoids and terpenes are then extracted from the fresh, frozen plant material using hydrocarbon solvents. This whole process is done at extremely cold temperatures, ensuring no thermal degradation to the precious and volatile terpenes.

In lieu of these intricate steps to preserve the flower and extracts, live resin has continuously gained popularity. Namely because vaping with live resin is the best way to sample fresh cannabis terpene profiles in its most authentic fashion

It is amazing to see how much cannabis extracts have grown and progressed with legalization. Due to such amazing advancements in standards, technology, and products, the concentrates category has exploded on the dispensary scene. In today’s market, flowers have been largely sidelined in favor of concentrate-based products like gummies. These products now adorn dispensary shelves in beautiful packaging replete with purity and testing specifications.

It’s an often-overlooked fact that the purity standards of the legal extracts have made reliable cannabis brands possible in the first place. You cannot develop a cannabis brand without consistent products that customers can rely on; all things considered, it can be said that advancements in extraction have not only stimulated the concentrate category but the entire industry as we know it today.

Heat-Not-Burn: A Q&A with Mike Simpson, CEO and Co-Founder of Omura

By Aaron Green
No Comments

Heat-not-burn is a non-combustion technology consisting of a heating source and either an oven that the user packs cannabis into or a stick pre-filled with cannabis. The cannabis is heated to a lower temperature than a combusted joint or bowl to create an aerosol that the user inhales. Heat-not-burn in this way is distinct from traditional vaping where a liquid or oil is heated to become a vapor and inhaled.

Omura is a design company that has developed a platform product for the heat-not-burn market.

We spoke with Mike Simpson, CEO and co-founder of Omura. Mike co-founded Omura in 2018 after an international design career where he spent much of his time in Japan working with consumer products.

Aaron Green: Mike, what trends are you following in the market?

Mike Simpson: I’m always tracking trends in the heat-not-burn space. Because of my background, I know that the tobacco industry inspires a lot of the technology in the cannabis space. If you look at all the vape pens, that technology was initially developed for big tobacco, which then later was adopted by cannabis. I’m always looking to stay educated on what’s happening in the tobacco industry, as I know it’s directly tied to my work in cannabis.

I’m also looking at what’s happening all over the world with legislation. I’ve been studying it for years, but this past year has been phenomenal. Seeing five new states go to some level of legalization, the federal law and new states legalizing cannabis in the 2020 Election. I believe the Biden/Harris victory will have a major impact on the industry, however we still have to see what happens with the Senate. These next couple of years are going to be very interesting to see how things shape out for cannabis.

Aaron: What are you personally interested in learning more about?

Mike Simpson, CEO and co-founder of Omura

Mike: I am interested in learning how the world is going to behave next year with this new life that’s been thrusted upon us. How effective is the new vaccine going to be? How are people going to retrospectively look at this year, and the lifestyle that they used to have before going into COVID? How much of it’s going to become permanent? How much of this Zoom life will we continue to enjoy? In the future, will office spaces become obsolete? How much will we still be using home deliveries? Do we actually want to go to restaurants again? That’s what I’m very interested in learning about is how human behavior and the world will change because of what’s happening right now.

Aaron Green: How did you get started at Omura?

Mike Simpson: Great question. I moved to Japan as a designer working for Lego and set up their design office for Lego toys. After Lego, I started working instead with Nike and Adidas designing performance sneakers and apparel for a couple of years until I found Big Tobacco — which is where my Omura story begins. I rapidly found myself in a position where I was creating new technologies, for the consumption of nicotine and tobacco. While working on an early project, I was asked if I knew any science fiction writers. Thanks to Lego, I just so happened to know Syd Mead, the designer for popular sci-fi films including BladeRunner, Tron and Aliens. So, I called him and we worked on a project which was aimed at setting the future of the smoking industry. Obviously, this was a brilliant project for someone like myself to get involved in. We came up with several scenarios that depicted the future of what tobacco consumption would look like, and each of them essentially included vaporization. This was before the vaporization days which made it kind of a difficult sell. I spent many years working on where we could use existing technologies in order to execute some of these scenarios. Ten years later, I moved to California, and I started studying the cannabis space for Big Tobacco which ultimately led me to Omura.

Aaron: Can you give me a reference point on the date when you were back in California?

Mike: I came here eight years ago, and I was in Japan pretty much 10 years prior to that.

Essentially what I realized when I got to California was that cannabis was perfect for heat-not-burn because of all the cannabinoids and the terpenes. You heat it up, and you get all of the good properties out of it without the need for combustion. There were already hundreds of products in the market, which validated that people love doing it.

However, there was a ritual: you needed to buy the flower, grind it, pack the device, select the temperature and then use the same mouthpiece repeatedly. And it doesn’t stop there. When the session is finished, you dig out the used flower with a metal spatula or brush. After every 10 or 15 times you have to clean it with rubbing alcohol to get rid of any existing residue from those sessions. This is just a big messy job with a massive amount of inconsistency and variability. For me, it was mind blowing that people would even go through this procedure. With Omura, I knew we needed to simplify that process. Our product comes with a pre-filled flower stick with an exact dose, that you place in the device very simply. You then use the stick as the mouthpiece and when you’re finished, throw the flower stick in the trash. It’s compostable and biodegradable. So we eliminated all of those pain points.

Aaron: Great! Where are you guys based out of?

Mike: Venice, California.

Aaron: So, what makes the Omura vaporizer different from other heat-not-burn products? You mentioned you have the disposable cartridge. Is there a design philosophy around it that you can talk more about?

Mike: Omura comes with 12 flower sticks in child-proof packaging. What makes us different is that we have our proprietary flower stick and device that work together. With our heat-not-burn technology, you get all the terpenes, but when you set fire to it, as you would with other products, you mask that with smoke. Our product is different from anything else in the market, because it has simplified the user experience through efficiency, user interaction and also through design as well.

The other founders come from deep design and technology backgrounds, designing technologies for Apple and Philips Electronics, so it was an important focus for us with Omura. Our newest device, the Series X was designed by Michael Young, a world-renowned industrial designer who has built an impressive portfolio of innovative products.

The Omura Series X

With Omura, we’re bringing sophistication of the design world into the cannabis world. It’s not just about simplifying the experience and making a great kind of efficient method of consumption, it’s also about creating something for everyday use that is beautifully designed and easy to use.  

Aaron: The Series X is Omura’s latest device. Can you tell me what changes you’ve implemented to make it better than the first version?

There are a few differences between the Series 1 and Series X: First, the new design fits in the palm of your hands so it’s discreet. It comes with a USB-C charging base that automatically connects with magnets. We’ve also improved the efficiency of the oven. The first device boiled 94% of the cannabinoids, this one now boils 99%. We’ve increased user-efficiency, by removing the button from the Series 1 making it so all you have to do is put the flower stick in and the device starts automatically. Additionally, we wanted to give users an option between a hotter or cooler experience so we added an extra heat curve, as we recognize that some of our CBD users prefer more of a terpene experience.  

Aaron: Can the user modify that with an app?

Mike: It is a very simple switch on the bottom of the device that allows you to toggle between the higher and lower temperature curves

Aaron: Okay, cool. Can we talk about your supply chain a little bit here? Do you manufacture everything in Los Angeles? Or do you have partners? 

Mike: Everything is designed in the US and manufactured in China. Which is fairly common throughout the industry. Shenzhen is well known for making products for the vaping industry. We create empty tubes filled in a batch production process. All the flower is grown here in the US. To clarify, we aren’t a plant-touching company. We don’t have a cannabis license. When it comes to THC, we have partnership deals. We work with select cannabis brands which is how we are able to sell in dispensaries. On the other hand, our CBD model is split. We have two brands of our own. Libertine, which is more of a male-focused Gen Z brand. Then we have Oriel, which is more of a wellness brand, catered to women.

Aaron: So how would an aspiring brand get on your platform?

Mike: Good question. Any brand or company who is interested in partnering with Omura can contact us through our website, www.omura.com, on Instagram @Omura or via email: hello@omura.com. We would then assess them to see if they’re a good fit. Currently we’re looking to span quite a large kind of demographic as far as appeal. So, if these prospective partners are in a territory, whether it be California or another state, have good market share and high-quality flower, then we would be very open to having a conversation.

Aaron: That’s the end of the interview — thanks Mike!

CannaSafe Accredited to ISO 17025

By Cannabis Industry Journal Staff
No Comments

According to a press release sent out last week, Perry Johnson Laboratory Accreditation, Inc. announced the accreditation of CannaSafe Labs to ISO/IEC 17025. CannaSafe is based in Van Nuys, California and provides a number of different testing services, including full regulatory compliance testing for the state’s requirements.

CannaSafe was allegedly the first to break the news about vaping health issues caused by EVALI, the lung condition responsible for the 2019 vape crisis. According to the press release, they provided testing data that proved black market vapes contained dangerous chemicals, likely including vitamin E acetate, the chemical that the CDC says is linked to EVALI.

CannaSafe say they have plans to expand into a number of states beyond California. They are also planning to build a facility dedicated to CBD testing to meet market needs in the near future.

Biros' Blog

Judge Dismisses Claims in Vaping Illness Lawsuit

By Aaron G. Biros
3 Comments

In September of 2019, Charles Wilcoxen fell seriously ill after vaping cannabis oil from a cartridge. Just days after he began experiencing symptoms he was hospitalized and later diagnosed with lipoid pneumonia, the mysterious lung illness now known as EVALI associated with the 2019 vape crisis.

Wilcoxen spent three days in the hospital and ever since he was diagnosed, he has been unable to exercise, return to work full time or even play with his daughter. Attorneys for Herrmann Law Group representing Wilcoxen filed a product liability lawsuit, Wilcoxen v. Canna Brand Solutions, LLC, et al., in Washington State Court, naming six cannabis companies as defendants: Canna Brand Solutions, Conscious Cannabis, Rainbow’s Aloft, Leafwerx, MFused and Janes Garden.

This image came from the complaint filed, alleging that Mr. Wilcoxen believes this was a CCELL product.

This case was allegedly the first lawsuit in the wake of the 2019 vape crisis. The Vanderbilt University Law School Blog has a very comprehensive post on this case that has the original complaint and a lot of information on the lawsuit.

Canna Brand Solutions, the primary defendant named in the complaint, is a packaging supplier and distributor for CCELL vaping products (heating elements, pens and batteries) in the state of Washington. The complaint alleges that Wilcoxen believes he used a CCELL vape. CCELL is a Chinese company, which makes it notoriously difficult to pursue legal action against them, hence why Canna Brand Solutions was listed as a defendant instead.

On August 31, 2020, Judge Michael Schwartz dismissed all claims against Canna Brand Solutions. “All claims asserted by Plaintiff against Canna Brand in the above-mentioned matter shall be voluntarily dismissed without prejudice and without costs or fees to any of the parties to this litigation,” Judge Schwartz says in the dismissal. Judge Schwartz dismissed the case without prejudice, meaning it could be brought to the court again should the plaintiff’s attorneys decide to do so.

With the allegations against Canna Brand Solutions focusing on CCELL products, it seems that the case was dismissed largely due to a lack of evidence connecting exactly which product resulted in the illness, as well as the lack of culpability for a distributor of products they did not manufacture.

These are the vape cartridges that Mr. Wilcoxen purchased

Daniel Allen, founder and president of Canna Brands Solutions, claims that the product mentioned in the complaint did not come from his company. “We stand by our high quality and customizable CCELL vaporization products,” says Allen. “We feel vindicated in this case by the judge’s decision, which shows the claims against our company and products were completely unfounded from the beginning.”

He also added that the quality and safety of the products they distribute is their highest priority. “The product in question involved in this case did not come from Canna Brand Solutions,” says Allen.

Wilcoxen’s illness and subsequent long-term lung injury is extremely unfortunate. Thousands of people have been hospitalized and 68 deaths have been confirmed by the CDC. The CDC is still calling the illness EVALI (e-cigarette, or vaping, product use-associated lung injury). According to the CDC, there is no real known cause of EVALI, but they have found that vitamin E acetate is “strongly linked” to the outbreak. Knowing that, it is entirely possible that Mr. Wilcoxen’s illness was a result of one of the cannabis products he consumed, just most likely not anything that came from Canna Brand Solutions. A closer look at the contents with an independent lab test of the THC oil he consumed could shed some more light on what exactly caused the illness.

I would venture to guess that one of the products he consumed did have vitamin E acetate. Because the case was dismissed without prejudice, it could be brought to the court again if, say, Mr. Wilcoxen’s attorneys were to obtain more evidence, such as an independent lab report showing vitamin E acetate in the contents of one of the products he consumed. If Mr. Wilcoxen’s attorneys can figure out which product actually contained vitamin E acetate, perhaps the lawsuit could get a second shot and Mr. Wilcoxen could have a greater chance at getting some long-overdue and much-deserved restitution.

Leaders in Extraction & Manufacturing: Part 5

By Aaron Green
No Comments

Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the fifth and final article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.

In this week’s article, we talk with Kristen Suchanec, VP of Production at Island. Kristen converted her experience in traditional consumer packaged goods to cannabis to help create a brand that is sought after by many. The interview with Kristen was conducted on August 21, 2020.

Aaron Green: Good afternoon Kristen, I am glad we were able to put this interview together. I know you have been very busy!

Kristen Suchanec: I’m so sorry this took so long to actually work! Thank you for bearing with me. I’m happy we are able to talk.

Aaron: Great! I like to start off the conversation with a question that helps our readers get to know you a little better. So, Kristen can you tell me how you got involved at Island?

Kristen Suchanec, VP of Production at Island

Kristen: My background is in manufacturing and planning for consumer packaged goods. I had a friend of a friend and we were just at a happy hour and I asked what he was up to. He was actually our VP of Finance at Island and he handed me a box of pre-rolled joints. They were our Island Minis and I thought it was a great customer experience. I loved the brand and packaging which made it a consumer product versus, you know, this was a few years back where cannabis wasn’t necessarily commoditized or branded. I got really excited about that because I feel like cannabis should be traditional CPG and it should appeal to different people and it should have different brands that appeal to those different groups. So I literally just started a conversation. His brother is our founder and CEO and they needed someone to run production so that was my background and it all kind of lined up and I ended up being employee number five at Island!

Aaron: Wow, employee number five – awesome! OK, great. That is some nice background about how you got involved at the company. The next questions get into product development and manufacturing. The first question is: what’s your decision process for starting a new product?

Kristen: Yea, we are right now owning the lane between cultivation and distribution. So, getting those raw materials for whether it be concentrates or flower and then converting them into that final packaging for everything. So that is what we focus on and spend all of our time with automation and trying to make that process as efficient as possible.

When we’re looking at a new product we’re not necessarily creating a new extraction, we are really looking at the market and the end consumer and what people want. At Island we’ve really focused on vape, pre-roll and packaged flower. Those are the three categories we are working on right now. We are expanding and looking to move more towards vape and live resins and specialty concentrated products that we haven’t really had in our portfolio before. What we would like to do is make sure we have the capability to manufacture that and then take a look at where we think the market is going. We are trying to go in the flower, pre-roll and vape because that is where we spent so much of our time getting pieces of automation so not everything we are bringing in house is manual.

Aaron: Now when you say the capability to manufacture that are you talking about from a packaging perspective or…?

Kristen: Yes, so we won’t do any extraction on site. It’s getting distillate, shatter and flower and then we take that and convert that either into pre-rolled joint, a package of flower or any other final product. So, we are looking at automating that packaging piece.

Aaron: Got it. OK, so the next question — and I think you kind of touched on this as well — are you involved in manufacturing to the extent that you are manufacturing the packaging?

Kristen: Yes absolutely. My whole team’s manufacturing is based out of Oakland. That’s where we do all the conversion of products. I oversee that entire team and have been really involved in a lot of the equipment that we have sourced and iterations that we’ve gone through to make sure that we’re able to automate as much as possible. We’ve really focused on the issue of weighing the material. For our flower line everything is weighed and put into a jar, capped, sealed and labeled for it to come off our lines. We don’t have anyone in packing or anything like that. Our pre-rolls manufacturing is an automated machine where it actually weighs the flower before going into the cone so we’re not having to weigh after the fact and take into account the weight of the cone because that’s so variable so we know that the customer is getting consistency. Then for the vapes, it’ssame thing – the volumetric doses everything.

I have to give my credit to everyone on the floor who is doing the day to day, they find so many new solutions since they are the ones that are hands on.  I am really involved in what new equipment we need, what problems we are looking to solve and what’s causing our bottlenecks so we can continue to improve our process week over week and year over year.

Aaron: We’ll dig into some of those problems in a bit. What is your process for not just starting new product but for developing a new product?

Kristen: Yeah, absolutely. So, I think it’s really interesting to see where the market is going. What’s selling really well and especially over the past year pre rolls have been a huge growth platform for us. And especially now, we’ve seen some changes because of COVID as well. We have single joints. But then we have our Minis, which I’ve mentioned before, which are half gram joints. We’re seeing sales on those actually increased because I think people are sharing joints as people want individual things because of this pandemic.

When we go through this process, we’re really – again – we’re so focused on what the consumer wants, and what we think is going to add to our portfolio. Then when marketing and our product team comes to me, we really focus on our machinery, what we can do with it currently, and if we would need something additional. So,we’re excited about expanding into 510s right now. We’re looking at how we can automate the process of capping – we can fill right now, but not cap. And then we also take a look at packaging.

I think it’s a little different than creating like a whole new product, extraction or anything like that, but we were looking at more sustainable options for packaging for child resistance because we’re trying to move away from barrier bags as much as possible. We’re looking at, okay, how many stickers do we need to put on there? What is the labor time going into each piece of product? And again, how are we eventually going to get some consistency across product lines, etc.

So, it’s really taking all three of those components, making sure we’re getting out the customer that feels like they want. I’m having it either fit into our process or again, then go through and look at what automations meanand automation equipment investment you want to make for long term future investments.

Aaron: Are you developing new products internally, or are you relying on outside manufacturers for that?

Kristen: Not everything we do is internal. We have a big network of, you know, cultivators and extractors we work with, but we’re in the midst of getting our own cultivation and manufacturing in house by working with other companies. So with that we’re doing everything.

Aaron: Do you ever bring in external product development consultants for helping out with your processes?

Kristen: No, we don’t bring in consultants. But we have brought in another brand into our fold via a brand called Neutron Genetics. That is part of our overall portfolio. We work very closely with the founder because he has a lot of trade secrets, a lot of his own processes to make sure you’re getting the best product for that specific brand.

Aaron: In your product development, what does getting stuck look like to you?

Kristen: That’s a good question. I think one of the biggest challenges is working with the plant itself, because it’s not consistent and it’s not homogenous. You could get the same strain from the same cultivator, but it’ll be a different batch. It might be a little stickier or a little larger, etc. When you’re looking at traditional manufacturing and automation, you want consistency, homogenized liquids, same viscosity every time, and we don’t have that because the plant itself is natural and is going to have all these different expressions depending on the batch and how it was grown and how it was trimmed even.“I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team.”

So, getting stuck means finding an off-the-shelf solution that might work for, you know, nuts and bolts or some kind of food production and then you’re going to have to convert it to actually work with the cannabis plant. So that’s what makes it so challenging, but also really exciting. In the bud, humidity and air can really throw off a manufacturing process which is really different than just doing beverages for example.

Getting stuck means really having to work with the plant concentrates specifically if you think about just the nature of those whether it be shatter, distillate or very sticky product. So again, working with machinery isn’t always what goes hand in hand. So, getting stuck is dealing with all those different formats and inconsistency using the same product day after day.

Aaron: It sounds like consistency is kind of a main topic here?

Kristen: Yeah, I think it depends on what product format we have. For example, about a year ago, we launched infused pre-rolls for Neutron where we’re putting flower, kief and shatter into a joint. So that’s going to perform differently on a piece of machinery than just straight flower.

I think it all depends on the product. Usually it happens when it’s in that machine, you’re trying to get a good flow and a good consistency. You want to have time studies, you know how long it takes to make each batch. But if a certain flower mix is performing differently, it’s getting the settings of the machine dialed, right? It’s also properly training personnel so people know how to react when things get going. Sometimes things get physically stuck in the machine as well, so to be able to react on that.

I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team. So for our pre-roll machine, we are now on our third version of it, just because we kept running into the same roadblocks and I’m hoping that continues to evolve and we just continue to get better equipment year after year.

Aaron: I see, do you ever hire outside consultants when you do get stuck?

Kristen: We’ve worked closely with vendors. I will say that we’re not a machine shop or engineering firm. So we’re not the ones creating a lot of what we use on the floor. We’ve partnered with various vendors, which has been helpful, but we haven’t used external consultants.“When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see.”

Aaron: Okay, now imagine that you have a magic wand and somebody can come in and help you. What does your magic helper look like?

Kristen: I could probably make a really long list if I’m focusing on just my manufacturing and everything! I think the next thing which we’re already thinking about that magic wand is how to get a perfectly rolled joint without having so much manual human touch to it. And like I said, we’ve really attached to that weighing problem. And we’ve seen solutions out there that you know, claim to twist and have that “perfect roll” and you don’t need to even touch it. But I think the biggest challenge there is it depends how well it’s packed. You know, you don’t want it too tight. You don’t want it too loose for that customer experience. So getting that quality, if I could wave a magic wand where I’m putting in, you know, paper on one side and out comes perfectly rolled joints, that would be my magic wand for sure. Okay, I think there’s a lot of solutions out there but to get that quality and that consumer experience that we want, I haven’t seen working practice yet.

Aaron: Okay, What’s the what’s the most frustrating thing you’re going through with the business right now?

Kristen: Again, that could be a long list! I think from a more macro-level, it’s definitely the competition with the illicit market and just how there’s not enough outlets for legal cannabis right now in the state of California. When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see. We’re going to get this growth and projection of the right number of dispensary licenses and things like that are definitely a huge frustration as well as with the tax structure right now because it’s obviously contributing to people going to the illicit market.

Aaron: So what are you following in the market? And what do you want to learn more about?

Kristen: Yeah, I think that’s a great question. I think the thing I’m most excited about for the larger population isjust more research to come out about the actual attributes of the plant, or how different cannabinoids react together and can have different effects. How terpenes can affect the high, how things can be used and distantly, recreationally, etc. And really, hopefully evolve and move away from strictly some sativa, hybrid,indica classifications, and really be able to educate the consumer more about the plant so people can have a more a personal relationship to understand how cannabinoids or specific terpenes are going to give them a different effect. And again, I think that’s so interesting because it could be used for therapeutic reasons that people do consume cannabis or it could just make it a better experience for people who want to take this as an escape or a way to relax and everything. So I’m really excited because more research is going to be able to get done and we can really learn more about how all of these things interact in the body and then people can take it to a whole new experience and be more educated all around.

Aaron: Alright that’s the end of the interview Kristen! Nice chatting and meeting you!

Kristen: Alright, thanks Aaron!

Leaders in Extraction & Manufacturing: Part 4

By Aaron Green
No Comments

Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the fourth article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.

In this week’s article we talk with Michael Schimelpfenig, head of R&D and BHO extraction manager at Bear Extraction House. Michael worked in the cannabis space for about five years prior to landing his role at Bear, having spent several years in the hills of Humboldt County. The interview with Michael was conducted on August 3, 2020.

In next week’s piece, we sit down with Kristen Suchanec, vice president of Production at Island. Stay tuned for more!

Aaron Green: Good morning Michael and thank you for taking the time to chat with me today!

Michael Schimelpfenig: Thanks, excited to be here!

Aaron: I like to start off the conversation with a question that helps our readers get to know you a little better. So, Michael can you tell me how you got involved at Bear Extraction House?

Michael Schimelpfenig, head of R&D and BHO extraction manager at Bear Extraction House.

Michael: You know, I actually landed my role at Bear through a job search on LinkedIn. I had been working in the traditional market for five years and was getting tired of the irregular paychecks and general uncertainty of working in that market. You know, too many helicopter buzzes and all that. I felt like the risk vs reward just wasn’t there. I like Northern California and knew I wanted to find something up in Humboldt County where I had been fortunate to get experience out in the hills. After I applied on LinkedIn, I was contacted in twenty-four hours. I had an interview twenty-four hours after that and the next day I had a job! It’s been a big change going to a legal company. The possibilities are lightyears beyond what you can do in the traditional market. Lots of resources and equipment available that just aren’t there in the traditional market.

Aaron: Fascinating! I spent a week up on Humboldt last year and it is beautiful up there. The next questions will be focused on product development and manufacturing. What is your decision process for starting a new product?

Michael: We get feedback from a lot of different places. Sometimes a new product idea is coming from our CEO, Per. He comes to me with new ideas and asks if we can do something. Often it will start with a general question. Is it possible with the given capabilities? Is it scalable? Some of our new product ideas are based on market input and then others are based on employee input. Sometimes we have pre-existing ideas and just need to sit down to formalize them. Here at Bear we have the capability of making a lot from a little input.

We’re always playing with ideas. We have lively R&D meetings each week where we throw ideas around. Take byproducts from a product development run for example. Maybe it’s not a byproduct, but maybe a separate new product altogether! Sometimes we’ll start off wanting to make something and, in the process, create something unexpected that we are then able to turn into a product. Creating new products is just as important as improving optimizations. Ideas come from all over the place.

We focus these ideas through the R&D committee. Common questions include: How do we develop the product? What are the costs? Is it marketable? We have to view things from an economic standpoint and we won’t proceed until we can figure out what the product can be and what we can make money from. Our R&D committee is made up of our COO, Jeff, our lead extractor, our oven room manager and our post-production manager who focuses on product separation. When we kick a new project off It all takes lots of scheduling and coordination.

Aaron: Are you developing new products internally?

Michael: We do 100% in-house product development and manufacturing. We are formalizing and creating a more focused approach to R&D and are bringing in some academics now. They are young minds with backgrounds in organic chemistry and thermodynamics. This is important because it’s the science behind the process that helps to generate the products. We believe the added talent should help to provide some grounding to the R&D. Before we made a lot of products by accident. The ultimate goal is uniform manufacturing and that requires an understanding of molecular processes.

Aaron: Answer the next question however you like. What does being stuck look like for you?“If a product isn’t behaving the way we expect, we will do testing to determine cannabinoid and terpene levels to gain better understanding.”

Michael: Well, there are a couple ways to get stuck. Sometimes you can get stuck with a limited product portfolio. A year and a half ago all we made was live resin. Now we have different levels of live resin and six different vape carts. If you are not changing and developing new products, you are stuck.

When the web of production stops going that is definitely what I consider getting stuck. You can get stuck if sourcing material is difficult to find or cost prohibitive. We will pivot and adjust manufacturing material if that happens. We are also exploring best avenues for sourcing high quality trim and working with farmers to specifically grow strains and exotic genetics. But overall, getting stuck happens. Being stuck, on the other hand, is a lack of creativity.

Aaron: If you get stuck is it usually the same place? Or is it different each time?

Michael: We have redundancies for equipment and components. If we are getting stuck in the same place it is usually due to a lack of source material. Sometimes we get material that degrades prior to extraction. It’s a matter of contacting supplier to coordinate with them on the best approach forward. If a product isn’t behaving the way we expect, we will do testing to determine cannabinoid and terpene levels to gain better understanding. In the end, sometimes we just have to pivot to other products with things we have.

Aaron: Thanks for that. Now, imagine you have a magic wand that can take care of your issues. What does your magic helper look like?

Michael: My magic helper would be someone to help with reporting. Someone that can take care of METRC indexing and preparing final R&D reports. Like a magic data processor. Someone to handle the minutiae.

Aaron: What’s most frustrating thing you are going through with the business?

Michael: There’s never enough time! We continue to manufacture at full capacity all the time. With that demanding of a schedule it can be difficult to manage time between day-to-day processes and being able to look at bigger picture.

Aaron: Now for our final question: What are you following in the market and what do you want to learn about?

Michael: I’m following the guys out there that are heavy into crystallization. There are some huge THCA diamonds coming from East Coast Gold. I would like to know what their solution is. What is their magic liquid and process? I am a big fan of diamond growth. You can grow extremely pure isolates that way. We grow our own diamonds and have had them tested greater than 99.99% THCA. I think high level purity THCA from diamonds is preferred versus distillate. There is a difference in the smoke between them too. Having a process for making large quantities of diamonds would open us up to sticking our foot in edibles and topicals too. There is control that comes with having a purity level like that. Dosage is difficult without it. I am also interested in improving extract purity and isolating terpenes. I like solvent-less products. It means it came from a high-quality source. I would be just as happy smoking good flower as concentrate derived from the same flower.

Aaron: Alright that concludes our interview! Thank you again for the time today, Michael!

Michael: Thank you.

Leaders in Extraction & Manufacturing: Part 3

By Aaron Green
No Comments

Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the third article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.

In this week’s article we talk with Joaquin Rodriguez, chief operations officer at GenX Biotech. Joaquin was introduced into the cannabis industry through a close personal relationship and has spent seven years researching and navigating the cannabis market before jumping into his career with GenX Biotech. The interview with Joaquin was conducted on August 4, 2020.

Next week, we’ll interview Michael Schimelpfenig, head of R&D and BHO extraction manager at Bear Extraction House. Stay tuned for more!

Aaron Green: Hi Joaquin! I appreciate you taking the time to chat today. I’m glad we were able to connect!

Joaquin Rodriguez: Absolutely! I’m looking forward to it.

Aaron: Me too! So, I like to start off the interview with a background question so people get a chance to know about you better. How did you get involved with GenX Biotech?

Joaquin Rodriguez, chief operations officer at GenX Biotech

Joaquin: I went to school at Cal Poly for mechanical engineering and spent some time in the oil industry. In 2011 I was introduced to who would be the future founder of GenX Biotech, Shea Alderete. I spent 7 years diving into cannabis industry to better understand the landscape and Prop 215 (California’s Compassionate Use Act of 1996) and then Prop 64. In late 2017, I joined GenX Biotech to spearhead the acquisition of licensing and scale up distillate manufacturing.

Aaron: Awesome. My next questions are focused on product development. What is your decision process for starting a new product at GenX Biotech?

Joaquin: Our founder, Shea Alderete, is an innovator in product development. He specializes in formulations and new formulas for vape products. We are big on gathering empirical data. In any new product we will run a small batch and test first with heavy cannabis users to gauge their reaction to the product. We will then test with light cannabis users and finally new cannabis users so we get the full spectrum of user experiences. Throughout the process, we are gathering empirical data on things like taste and perceived therapeutic effects.

Aaron: Are you personally involved in manufacturing? Tell me about your process.

Joaquin: I am, yes. We specialize in large scale distillate manufacturing to make THC oil and we formulate batches using cannabis-derived terpenes. This what we call Sauce, a full spectrum high-terpene extract obtained from a butane hash oil (BHO) process. This is a separate extraction method from our alcohol extraction process.

Aaron: Very insightful! What is your process for developing new products?

Joaquin: GenX Biotech’s core mission is to bridge the gap between cannabis culture and the science behind cannabis. We focus more on therapeutic effects as well as recreational. We keep a pulse on the industry as a whole to see what people are doing and saying as well as new extraction methods. When we capture that data we evolve and adapt and create new formulations based on that preference and test it out. It’s a constant game of “does this look good? taste good? make you feel good? how is the potency?” It’s really a big collaboration with our end users.

We will also collaborate with other brands and manufacturers to stay ahead of the curve, share information that can make us a better company, more power in numbers is what we say. As an example, Wonderbrett is known for their high-quality flower. They have a high-end product and high-end brand recognition. We would, for example, strategize and collaborate together to utilize a unique cannabinoid and terpene profile and test that with our vape products in the market. It’s more of a collaboration than a white label relationship. In this way, Wonderbrett can expand into the extracts space via their brand. We do this with other brands as well where we’ll use their raw material and joint market the brands on the final product.

Aaron: Fantastic. Are you developing new products internally?

Joaquin: We develop all our products 100% internally.

Aaron: Do you ever bring in external product development consultants?

Joaquin: Not for products, however there are certain situations, like hardware development, where we will work with outside groups that specialize in equipment manufacturing to create something specific and one off for us. We are currently working on bringing to the market an FDA-approved inhaler technology device that is a non-combustible metered delivery device that we are really excited about. In addition, we have an incubator program with our LA partners to introduce new brands to the market which is a great asset for consulting brands looking for a home and multistate resources.

Aaron: Very cool, that’s the first I have head of inhalers in the market. For my next question feel free to answer however you like. What does being stuck look like for you?

Joaquin: Getting stuck can happen in a few different areas. With respect to manufacturing, the main bottleneck issues are consistent quality of the raw biomass materials. Mother nature does not duplicate the same results exactly every time and fluctuations can affect the cost and quality of raw goods. Other things like wear and tear on manufacturing equipment are not normally an issue as everything is stainless steel and pretty stable. But things like valves, gaskets and grommets tend to wear down with consistent use. When those fail, a whole operation can be shut down. We keep a stockpile of those on hand to make sure we stay in production.

“I support the leaders that help increase the overall knowledge for consumer and patents to know the difference between a quality product and a boof product.”Aaron: If you get stuck is it usually the same place? Or is it different each time?

Joaquin: Like I said, if we get stuck its usually in the sourcing of raw materials. Cultivators can have a bad crop or weather might affect their crop. It almost always comes down to the relationship with your cultivators. They fuel the industry and are the back bone of the whole supply chain. If they have any issues it affects everyone down line.

Aaron: Do you ever hire outside consultants when you get stuck?

Joaquin: Not really. We rely on our experience and years of operating and going through our own failures to navigate any issues with manufacturing. Collectively we work together to pivot and adapt to the ever-changing legal cannabis landscape. We do on occasion outsource to a 3rd party to help acquire raw goods. On the other hand, we separately consult for other people and groups looking to build out labs!

Aaron: That’s an excellent position to be in! For the next question imagine there’s a magic wand. What does your magic helper look like?

Joaquin: Someone that can come in and help with taxation. Triple taxation is tough. There’s the cultivation tax, manufacturing tax, state tax and local taxes. Long Beach recently lowered their local tax from six to one percent, so that is encouraging, but there needs to be a fair taxation for this industry to really thrive.

Aaron: What’s the most frustrating thing you are going through with the business?“I’m really excited for the continued education and deregulation of cannabis and its medical applications.”

Joaquin: I think that would be sales downline. With Prop 215 and the transition to prop 64, legal outlets have been heavily truncated. There are now approximately 600 legal retail outlets down from a high of about 4500 prior to prop 64. The competition landscape is really high and it’s hard to get product on the shelves without proper capital to keep the brand going. It is advantageous to partner with an established distro in order to get involved with their downline and run lean and mean.

Aaron: Now for our final question. What are you following in the market and what do you want to learn about?

Joaquin: I’m really excited for the continued education and deregulation of cannabis and its medical applications. It never should have been illegal to begin with, but with government corruption and greed it was targeted and use for multiple agendas. I support the leaders that help increase the overall knowledge for consumer and patents to know the difference between a quality product and a boof product. You have seen the results of the vape scare and there’s a good reason for it. Most people don’t want to pay the high ticket for legally compliant product so they turn to the illegal side where no regulation or testing is conducted to ensure they are getting safe, quality products.

In addition, the demand is so strong that illegal producers are able to put whatever they want in their products and sell them as if they are legit, provided they have the knock-off packaging, and those operators further harm those people because the state they are selling in hasn’t adapted to the times and has prohibited the availability of legal cannabis. Their inaction and support of the continued “war on cannabis” makes them just as guilty in the results of those people who have fallen ill or been hospitalized.

There have been lots of new studies published that are slowly making their way into social media and reaching consumers so that is encouraging. Another important element is the education of bud tenders because they are the face of the brand when the customer or patient is at a legal dispensary so they need to be educated on what makes for a quality product and how it can help or achieve a desired result for a customer or patient.

Aaron: Well, that concludes the interview Joaquin. Thanks for taking the time today to talk. This is all awesome feedback for the industry. Thanks so much for these helpful insights into product development in the cannabis industry.

Joaquin: Thanks, glad to help!