In September of 2019, Charles Wilcoxen fell seriously ill after vaping cannabis oil from a cartridge. Just days after he began experiencing symptoms he was hospitalized and later diagnosed with lipoid pneumonia, the mysterious lung illness now known as EVALI associated with the 2019 vape crisis.
Wilcoxen spent three days in the hospital and ever since he was diagnosed, he has been unable to exercise, return to work full time or even play with his daughter. Attorneys for Herrmann Law Group representing Wilcoxen filed a product liability lawsuit, Wilcoxen v. Canna Brand Solutions, LLC, et al., in Washington State Court, naming six cannabis companies as defendants: Canna Brand Solutions, Conscious Cannabis, Rainbow’s Aloft, Leafwerx, MFused and Janes Garden.
This image came from the complaint filed, alleging that Mr. Wilcoxen believes this was a CCELL product.
Canna Brand Solutions, the primary defendant named in the complaint, is a packaging supplier and distributor for CCELL vaping products (heating elements, pens and batteries) in the state of Washington. The complaint alleges that Wilcoxen believes he used a CCELL vape. CCELL is a Chinese company, which makes it notoriously difficult to pursue legal action against them, hence why Canna Brand Solutions was listed as a defendant instead.
On August 31, 2020, Judge Michael Schwartz dismissed all claims against Canna Brand Solutions. “All claims asserted by Plaintiff against Canna Brand in the above-mentioned matter shall be voluntarily dismissed without prejudice and without costs or fees to any of the parties to this litigation,” Judge Schwartz says in the dismissal. Judge Schwartz dismissed the case without prejudice, meaning it could be brought to the court again should the plaintiff’s attorneys decide to do so.
With the allegations against Canna Brand Solutions focusing on CCELL products, it seems that the case was dismissed largely due to a lack of evidence connecting exactly which product resulted in the illness, as well as the lack of culpability for a distributor of products they did not manufacture.
These are the vape cartridges that Mr. Wilcoxen purchased
Daniel Allen, founder and president of Canna Brands Solutions, claims that the product mentioned in the complaint did not come from his company. “We stand by our high quality and customizable CCELL vaporization products,” says Allen. “We feel vindicated in this case by the judge’s decision, which shows the claims against our company and products were completely unfounded from the beginning.”
He also added that the quality and safety of the products they distribute is their highest priority. “The product in question involved in this case did not come from Canna Brand Solutions,” says Allen.
Wilcoxen’s illness and subsequent long-term lung injury is extremely unfortunate. Thousands of people have been hospitalized and 68 deaths have been confirmed by the CDC. The CDC is still calling the illness EVALI (e-cigarette, or vaping, product use-associated lung injury). According to the CDC, there is no real known cause of EVALI, but they have found that vitamin E acetate is “strongly linked” to the outbreak. Knowing that, it is entirely possible that Mr. Wilcoxen’s illness was a result of one of the cannabis products he consumed, just most likely not anything that came from Canna Brand Solutions. A closer look at the contents with an independent lab test of the THC oil he consumed could shed some more light on what exactly caused the illness.
I would venture to guess that one of the products he consumed did have vitamin E acetate. Because the case was dismissed without prejudice, it could be brought to the court again if, say, Mr. Wilcoxen’s attorneys were to obtain more evidence, such as an independent lab report showing vitamin E acetate in the contents of one of the products he consumed. If Mr. Wilcoxen’s attorneys can figure out which product actually contained vitamin E acetate, perhaps the lawsuit could get a second shot and Mr. Wilcoxen could have a greater chance at getting some long-overdue and much-deserved restitution.
Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the fifth and final article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.
In this week’s article, we talk with Kristen Suchanec, VP of Production at Island. Kristen converted her experience in traditional consumer packaged goods to cannabis to help create a brand that is sought after by many. The interview with Kristen was conducted on August 21, 2020.
Aaron Green: Good afternoon Kristen, I am glad we were able to put this interview together. I know you have been very busy!
Kristen Suchanec: I’m so sorry this took so long to actually work! Thank you for bearing with me. I’m happy we are able to talk.
Aaron: Great! I like to start off the conversation with a question that helps our readers get to know you a little better. So, Kristen can you tell me how you got involved at Island?
Kristen Suchanec, VP of Production at Island
Kristen: My background is in manufacturing and planning for consumer packaged goods. I had a friend of a friend and we were just at a happy hour and I asked what he was up to. He was actually our VP of Finance at Island and he handed me a box of pre-rolled joints. They were our Island Minis and I thought it was a great customer experience. I loved the brand and packaging which made it a consumer product versus, you know, this was a few years back where cannabis wasn’t necessarily commoditized or branded. I got really excited about that because I feel like cannabis should be traditional CPG and it should appeal to different people and it should have different brands that appeal to those different groups. So I literally just started a conversation. His brother is our founder and CEO and they needed someone to run production so that was my background and it all kind of lined up and I ended up being employee number five at Island!
Aaron: Wow, employee number five – awesome! OK, great. That is some nice background about how you got involved at the company. The next questions get into product development and manufacturing. The first question is: what’s your decision process for starting a new product?
Kristen: Yea, we are right now owning the lane between cultivation and distribution. So, getting those raw materials for whether it be concentrates or flower and then converting them into that final packaging for everything. So that is what we focus on and spend all of our time with automation and trying to make that process as efficient as possible.
When we’re looking at a new product we’re not necessarily creating a new extraction, we are really looking at the market and the end consumer and what people want. At Island we’ve really focused on vape, pre-roll and packaged flower. Those are the three categories we are working on right now. We are expanding and looking to move more towards vape and live resins and specialty concentrated products that we haven’t really had in our portfolio before. What we would like to do is make sure we have the capability to manufacture that and then take a look at where we think the market is going. We are trying to go in the flower, pre-roll and vape because that is where we spent so much of our time getting pieces of automation so not everything we are bringing in house is manual.
Aaron: Now when you say the capability to manufacture that are you talking about from a packaging perspective or…?
Kristen: Yes, so we won’t do any extraction on site. It’s getting distillate, shatter and flower and then we take that and convert that either into pre-rolled joint, a package of flower or any other final product. So, we are looking at automating that packaging piece.
Aaron: Got it. OK, so the next question — and I think you kind of touched on this as well — are you involved in manufacturing to the extent that you are manufacturing the packaging?
Kristen: Yes absolutely. My whole team’s manufacturing is based out of Oakland. That’s where we do all the conversion of products. I oversee that entire team and have been really involved in a lot of the equipment that we have sourced and iterations that we’ve gone through to make sure that we’re able to automate as much as possible. We’ve really focused on the issue of weighing the material. For our flower line everything is weighed and put into a jar, capped, sealed and labeled for it to come off our lines. We don’t have anyone in packing or anything like that. Our pre-rolls manufacturing is an automated machine where it actually weighs the flower before going into the cone so we’re not having to weigh after the fact and take into account the weight of the cone because that’s so variable so we know that the customer is getting consistency. Then for the vapes, it’ssame thing – the volumetric doses everything.
I have to give my credit to everyone on the floor who is doing the day to day, they find so many new solutions since they are the ones that are hands on. I am really involved in what new equipment we need, what problems we are looking to solve and what’s causing our bottlenecks so we can continue to improve our process week over week and year over year.
Aaron: We’ll dig into some of those problems in a bit. What is your process for not just starting new product but for developing a new product?
Kristen: Yeah, absolutely. So, I think it’s really interesting to see where the market is going. What’s selling really well and especially over the past year pre rolls have been a huge growth platform for us. And especially now, we’ve seen some changes because of COVID as well. We have single joints. But then we have our Minis, which I’ve mentioned before, which are half gram joints. We’re seeing sales on those actually increased because I think people are sharing joints as people want individual things because of this pandemic.
When we go through this process, we’re really – again – we’re so focused on what the consumer wants, and what we think is going to add to our portfolio. Then when marketing and our product team comes to me, we really focus on our machinery, what we can do with it currently, and if we would need something additional. So,we’re excited about expanding into 510s right now. We’re looking at how we can automate the process of capping – we can fill right now, but not cap. And then we also take a look at packaging.
I think it’s a little different than creating like a whole new product, extraction or anything like that, but we were looking at more sustainable options for packaging for child resistance because we’re trying to move away from barrier bags as much as possible. We’re looking at, okay, how many stickers do we need to put on there? What is the labor time going into each piece of product? And again, how are we eventually going to get some consistency across product lines, etc.
So, it’s really taking all three of those components, making sure we’re getting out the customer that feels like they want. I’m having it either fit into our process or again, then go through and look at what automations meanand automation equipment investment you want to make for long term future investments.
Aaron: Are you developing new products internally, or are you relying on outside manufacturers for that?
Kristen: Not everything we do is internal. We have a big network of, you know, cultivators and extractors we work with, but we’re in the midst of getting our own cultivation and manufacturing in house by working with other companies. So with that we’re doing everything.
Aaron: Do you ever bring in external product development consultants for helping out with your processes?
Kristen: No, we don’t bring in consultants. But we have brought in another brand into our fold via a brand called Neutron Genetics. That is part of our overall portfolio. We work very closely with the founder because he has a lot of trade secrets, a lot of his own processes to make sure you’re getting the best product for that specific brand.
Aaron: In your product development, what does getting stuck look like to you?
Kristen: That’s a good question. I think one of the biggest challenges is working with the plant itself, because it’s not consistent and it’s not homogenous. You could get the same strain from the same cultivator, but it’ll be a different batch. It might be a little stickier or a little larger, etc. When you’re looking at traditional manufacturing and automation, you want consistency, homogenized liquids, same viscosity every time, and we don’t have that because the plant itself is natural and is going to have all these different expressions depending on the batch and how it was grown and how it was trimmed even.“I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team.”
So, getting stuck means finding an off-the-shelf solution that might work for, you know, nuts and bolts or some kind of food production and then you’re going to have to convert it to actually work with the cannabis plant. So that’s what makes it so challenging, but also really exciting. In the bud, humidity and air can really throw off a manufacturing process which is really different than just doing beverages for example.
Getting stuck means really having to work with the plant concentrates specifically if you think about just the nature of those whether it be shatter, distillate or very sticky product. So again, working with machinery isn’t always what goes hand in hand. So, getting stuck is dealing with all those different formats and inconsistency using the same product day after day.
Aaron: It sounds like consistency is kind of a main topic here?
Kristen: Yeah, I think it depends on what product format we have. For example, about a year ago, we launched infused pre-rolls for Neutron where we’re putting flower, kief and shatter into a joint. So that’s going to perform differently on a piece of machinery than just straight flower.
I think it all depends on the product. Usually it happens when it’s in that machine, you’re trying to get a good flow and a good consistency. You want to have time studies, you know how long it takes to make each batch. But if a certain flower mix is performing differently, it’s getting the settings of the machine dialed, right? It’s also properly training personnel so people know how to react when things get going. Sometimes things get physically stuck in the machine as well, so to be able to react on that.
I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team. So for our pre-roll machine, we are now on our third version of it, just because we kept running into the same roadblocks and I’m hoping that continues to evolve and we just continue to get better equipment year after year.
Aaron: I see, do you ever hire outside consultants when you do get stuck?
Kristen: We’ve worked closely with vendors. I will say that we’re not a machine shop or engineering firm. So we’re not the ones creating a lot of what we use on the floor. We’ve partnered with various vendors, which has been helpful, but we haven’t used external consultants.“When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see.”
Aaron: Okay, now imagine that you have a magic wand and somebody can come in and help you. What does your magic helper look like?
Kristen: I could probably make a really long list if I’m focusing on just my manufacturing and everything! I think the next thing which we’re already thinking about that magic wand is how to get a perfectly rolled joint without having so much manual human touch to it. And like I said, we’ve really attached to that weighing problem. And we’ve seen solutions out there that you know, claim to twist and have that “perfect roll” and you don’t need to even touch it. But I think the biggest challenge there is it depends how well it’s packed. You know, you don’t want it too tight. You don’t want it too loose for that customer experience. So getting that quality, if I could wave a magic wand where I’m putting in, you know, paper on one side and out comes perfectly rolled joints, that would be my magic wand for sure. Okay, I think there’s a lot of solutions out there but to get that quality and that consumer experience that we want, I haven’t seen working practice yet.
Aaron: Okay, What’s the what’s the most frustrating thing you’re going through with the business right now?
Kristen: Again, that could be a long list! I think from a more macro-level, it’s definitely the competition with the illicit market and just how there’s not enough outlets for legal cannabis right now in the state of California. When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see. We’re going to get this growth and projection of the right number of dispensary licenses and things like that are definitely a huge frustration as well as with the tax structure right now because it’s obviously contributing to people going to the illicit market.
Aaron: So what are you following in the market? And what do you want to learn more about?
Kristen: Yeah, I think that’s a great question. I think the thing I’m most excited about for the larger population isjust more research to come out about the actual attributes of the plant, or how different cannabinoids react together and can have different effects. How terpenes can affect the high, how things can be used and distantly, recreationally, etc. And really, hopefully evolve and move away from strictly some sativa, hybrid,indica classifications, and really be able to educate the consumer more about the plant so people can have a more a personal relationship to understand how cannabinoids or specific terpenes are going to give them a different effect. And again, I think that’s so interesting because it could be used for therapeutic reasons that people do consume cannabis or it could just make it a better experience for people who want to take this as an escape or a way to relax and everything. So I’m really excited because more research is going to be able to get done and we can really learn more about how all of these things interact in the body and then people can take it to a whole new experience and be more educated all around.
Aaron: Alright that’s the end of the interview Kristen! Nice chatting and meeting you!
Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the third article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.
In this week’s article we talk with Joaquin Rodriguez, chief operations officer at GenX Biotech. Joaquin was introduced into the cannabis industry through a close personal relationship and has spent seven years researching and navigating the cannabis market before jumping into his career with GenX Biotech. The interview with Joaquin was conducted on August 4, 2020.
Next week, we’ll interview Michael Schimelpfenig, head of R&D and BHO extraction manager at Bear Extraction House. Stay tuned for more!
Aaron Green: Hi Joaquin! I appreciate you taking the time to chat today. I’m glad we were able to connect!
Joaquin Rodriguez: Absolutely! I’m looking forward to it.
Aaron: Me too! So, I like to start off the interview with a background question so people get a chance to know about you better. How did you get involved with GenX Biotech?
Joaquin Rodriguez, chief operations officer at GenX Biotech
Joaquin: I went to school at Cal Poly for mechanical engineering and spent some time in the oil industry. In 2011 I was introduced to who would be the future founder of GenX Biotech, Shea Alderete. I spent 7 years diving into cannabis industry to better understand the landscape and Prop 215 (California’s Compassionate Use Act of 1996) and then Prop 64. In late 2017, I joined GenX Biotech to spearhead the acquisition of licensing and scale up distillate manufacturing.
Aaron: Awesome. My next questions are focused on product development. What is your decision process for starting a new product at GenX Biotech?
Joaquin: Our founder, Shea Alderete, is an innovator in product development. He specializes in formulations and new formulas for vape products. We are big on gathering empirical data. In any new product we will run a small batch and test first with heavy cannabis users to gauge their reaction to the product. We will then test with light cannabis users and finally new cannabis users so we get the full spectrum of user experiences. Throughout the process, we are gathering empirical data on things like taste and perceived therapeutic effects.
Aaron: Are you personally involved in manufacturing? Tell me about your process.
Joaquin: I am, yes. We specialize in large scale distillate manufacturing to make THC oil and we formulate batches using cannabis-derived terpenes. This what we call Sauce, a full spectrum high-terpene extract obtained from a butane hash oil (BHO) process. This is a separate extraction method from our alcohol extraction process.
Aaron: Very insightful! What is your process for developing new products?
Joaquin:GenX Biotech’s core mission is to bridge the gap between cannabis culture and the science behind cannabis. We focus more on therapeutic effects as well as recreational. We keep a pulse on the industry as a whole to see what people are doing and saying as well as new extraction methods. When we capture that data we evolve and adapt and create new formulations based on that preference and test it out. It’s a constant game of “does this look good? taste good? make you feel good? how is the potency?” It’s really a big collaboration with our end users.
We will also collaborate with other brands and manufacturers to stay ahead of the curve, share information that can make us a better company, more power in numbers is what we say. As an example, Wonderbrett is known for their high-quality flower. They have a high-end product and high-end brand recognition. We would, for example, strategize and collaborate together to utilize a unique cannabinoid and terpene profile and test that with our vape products in the market. It’s more of a collaboration than a white label relationship. In this way, Wonderbrett can expand into the extracts space via their brand. We do this with other brands as well where we’ll use their raw material and joint market the brands on the final product.
Aaron: Fantastic. Are you developing new products internally?
Joaquin: We develop all our products 100% internally.
Aaron: Do you ever bring in external product development consultants?
Joaquin: Not for products, however there are certain situations, like hardware development, where we will work with outside groups that specialize in equipment manufacturing to create something specific and one off for us. We are currently working on bringing to the market an FDA-approved inhaler technology device that is a non-combustible metered delivery device that we are really excited about. In addition, we have an incubator program with our LA partners to introduce new brands to the market which is a great asset for consulting brands looking for a home and multistate resources.
Aaron: Very cool, that’s the first I have head of inhalers in the market. For my next question feel free to answer however you like. What does being stuck look like for you?
Joaquin: Getting stuck can happen in a few different areas. With respect to manufacturing, the main bottleneck issues are consistent quality of the raw biomass materials. Mother nature does not duplicate the same results exactly every time and fluctuations can affect the cost and quality of raw goods. Other things like wear and tear on manufacturing equipment are not normally an issue as everything is stainless steel and pretty stable. But things like valves, gaskets and grommets tend to wear down with consistent use. When those fail, a whole operation can be shut down. We keep a stockpile of those on hand to make sure we stay in production.
“I support the leaders that help increase the overall knowledge for consumer and patents to know the difference between a quality product and a boof product.”Aaron: If you get stuck is it usually the same place? Or is it different each time?
Joaquin: Like I said, if we get stuck its usually in the sourcing of raw materials. Cultivators can have a bad crop or weather might affect their crop. It almost always comes down to the relationship with your cultivators. They fuel the industry and are the back bone of the whole supply chain. If they have any issues it affects everyone down line.
Aaron: Do you ever hire outside consultants when you get stuck?
Joaquin: Not really. We rely on our experience and years of operating and going through our own failures to navigate any issues with manufacturing. Collectively we work together to pivot and adapt to the ever-changing legal cannabis landscape. We do on occasion outsource to a 3rd party to help acquire raw goods. On the other hand, we separately consult for other people and groups looking to build out labs!
Aaron: That’s an excellent position to be in! For the next question imagine there’s a magic wand. What does your magic helper look like?
Joaquin: Someone that can come in and help with taxation. Triple taxation is tough. There’s the cultivation tax, manufacturing tax, state tax and local taxes. Long Beach recently lowered their local tax from six to one percent, so that is encouraging, but there needs to be a fair taxation for this industry to really thrive.
Aaron: What’s the most frustrating thing you are going through with the business?“I’m really excited for the continued education and deregulation of cannabis and its medical applications.”
Joaquin: I think that would be sales downline. With Prop 215 and the transition to prop 64, legal outlets have been heavily truncated. There are now approximately 600 legal retail outlets down from a high of about 4500 prior to prop 64. The competition landscape is really high and it’s hard to get product on the shelves without proper capital to keep the brand going. It is advantageous to partner with an established distro in order to get involved with their downline and run lean and mean.
Aaron: Now for our final question. What are you following in the market and what do you want to learn about?
Joaquin: I’m really excited for the continued education and deregulation of cannabis and its medical applications. It never should have been illegal to begin with, but with government corruption and greed it was targeted and use for multiple agendas. I support the leaders that help increase the overall knowledge for consumer and patents to know the difference between a quality product and a boof product. You have seen the results of the vape scare and there’s a good reason for it. Most people don’t want to pay the high ticket for legally compliant product so they turn to the illegal side where no regulation or testing is conducted to ensure they are getting safe, quality products.
In addition, the demand is so strong that illegal producers are able to put whatever they want in their products and sell them as if they are legit, provided they have the knock-off packaging, and those operators further harm those people because the state they are selling in hasn’t adapted to the times and has prohibited the availability of legal cannabis. Their inaction and support of the continued “war on cannabis” makes them just as guilty in the results of those people who have fallen ill or been hospitalized.
There have been lots of new studies published that are slowly making their way into social media and reaching consumers so that is encouraging. Another important element is the education of bud tenders because they are the face of the brand when the customer or patient is at a legal dispensary so they need to be educated on what makes for a quality product and how it can help or achieve a desired result for a customer or patient.
Aaron: Well, that concludes the interview Joaquin. Thanks for taking the time today to talk. This is all awesome feedback for the industry. Thanks so much for these helpful insights into product development in the cannabis industry.
Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the first article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.
In this week’s article we talk with George Sadler, President and Co-founder of House of Platinum. George and his son Cody started their cannabis journey in 2010 when they sold their dirt bikes and set up a 10×10 garage. They have since built the business into a $70 million dollar cannabis empire across California, Michigan and now Oklahoma. The interview with George was conducted on July 31, 2020.
George Sadler, President and Co-founder of House of Platinum
Next week, we’ll interview Matthew Elmes, Director of Product Development at Cannacraft. Stay tuned for more!
Aaron Green: First off, George, congratulations on your recent announcement on the LOI from Red White & Bloom!
George Sadler: Thanks! The deal isn’t done yet but we’re looking at a sixty-five-million-dollar deal. Cody and I will be staying on as officers to oversee growth as we expand into new markets.
Aaron: That’s great news! I hope it all works out well for you and best of luck closing the deal. Now on to the interview questions we had planned. So first off, how did you get involved at House of Platinum?
George: My son Cody and I wanted to do extraction and have a vape company. Five or six years ago we climbed on a plane to China to speak with manufacturers. We started off with extraction equipment in a small room with a table top machine. After a time, we took year and a half off to get our licensing and do our buildout. We opened up again two years ago in June. At the time, China was the main resource for packaging, and everything really. We got hardware from another company and had our Chinese partners rework the hardware to address some of the issues we had. Cody and I spent a week in Shenzhen where we met with our Chinese partners. They first did cartridges, packaging and batteries.
Aaron: Thanks for that, George. The next questions will focus on product development and manufacturing. What is your decision process for starting a new product?
George: In the beginning, Cody and I would both be a part of new product development from beginning to end. Cody has taken lead now on the beginning phases so our new product development really starts with him. We collectively come up with the concept. Cody does the market research. The concept then goes to our design team for visuals and to do the artwork- this usually takes some time. After we are satisfied with the branding, we start the manufacturing process. We do everything start to finish and can go from design to package in less than two weeks. The only thing we still manufacture in China is hardware these days, so cartridges and batteries.
Aaron: Are you personally involved in manufacturing? Tell me about your process
George: Cody and I are both involved in manufacturing. In California, we have about a hundred employees at our facility. In Michigan we have another hundred, and Oklahoma has about thirty. In Michigan, we do carts only right now and are getting ready to launch chocolates and gummies. Oklahoma is also getting ready to do edibles and gummies.
Aaron: What is your process for developing new products? George: In manufacturing, when we start a new line of edibles, we’ll first do a full test batch of products before committing to full-scale manufacturing. We start small at first then scale into larger batches. If everything looks good, we’ll decide whether or not to invest in larger equipment.
Aaron: Are you developing new products internally?
George: Our California and Michigan production is done 100% in-house. In Oklahoma we have a licensing deal with a manufacturing partner.
Aaron: Do you ever bring in external product development consultants?
George: No. We do all of our product development internally.
Aaron: In product development or manufacturing, what does being stuck look like for you?
George: That depends on what phase of the process we’re talking about. One challenge is getting the recipe dialed and then figuring out how to move into large scale. Take chocolate for example: going from a one spout pour on chocolate to a three-spout pour. That process can take a while to figure out. Any time you are trying to move forward in your manufacturing process, if there isn’t existing equipment available you may need to purchase it. There isn’t a lot of information out there to gauge on the cannabis side what is relevant.
Aaron: How about source materials for your products?
George: We pride ourselves on doing a deep dive on all of our suppliers. That includes packaging, chocolate, sugar, and flower. The advantage of longevity in this industry, we have keen radar on those doing premium work.
Aaron: What’s the most frustrating thing you are going through with the business?
George: I think a majority of people would agree that there’s lack of understanding of what’s happening with licensing. Legacy market products and unlicensed stores are frustrating. Inconsistency on testing is also frustrating. The states aren’t really doing anything to correct inconsistent testing. But banking is the number one industry pain point. We have a handle on the rest. Banking we don’t have any help.
Aaron: Feel free to answer the next question however you like. Imagine you could have someone come in and wave a magic wand to solve your problems. What does your magic helper look like?
George: Hah! Not sure what a magic helper would look like. Distribution is our biggest headache. Distribution is a different animal that is outside cannabis product development. We do all of our distribution in-house and it can be a pain.
Aaron: Now for my final question: What are you following in the market and what do you want to learn about?
George: We’re semi-new in the CBD space. Anything up and coming is something we are looking at. We’re focused on going big and multi-state. Arizona is the next state we are looking at. Nevada is after that. The partnership with Red White and Bloom is going to grow the brand into other states with them. Growth continues in that direction. Recently we’ve been going back to cultivation and doing cultivation deals. We started as cultivators and a lot has changed in the past several years. We are trying to pick up new knowledge.
Aaron: Well, thanks for that George, this is all awesome feedback for the industry. That concludes the interview! Thanks so much for your time and congrats again on your recent announcement with Red White & Bloom.
The e-cigarette or vaping use-associated lung injury (EVALI) outbreak of 2019 caught the attention of many, and has brought with it the scrutiny of both regulators and plaintiffs’ attorneys eager to act as “civil prosecutors.” As Tolkien would say, the Eye of Sauron has now turned its gaze towards the cannabis vapor industry.
With the misinformation and negative publicity that the EVALI outbreak brought to the industry, vaporizer device manufacturers should expect more lawsuits to be filed against them through 2020 and beyond. The cannabis vapor industry should also expect the theories of defect alleged against their products to become more sophisticated as more plaintiffs’ attorneys enter the arena.
One theory of defect you should expect plaintiff’s attorneys to pursue in 2020 is what I generally refer to as “temperature control litigation.”
These pre-filled cartridges are compatible with just about any battery because of the universal 5/10 thread connectors.
Here is the problem:
Typical additives in cannabis oil, while once thought to be safe, can degrade at higher temperatures into toxic chemicals. For example, the Vape Crisis of 2019 was largely attributed to a cannabis oil additive known as vitamin E acetate. While typically regarded as safe for use in nutritional supplements or hand creams, when used in cannabis oil, investigators believe vitamin E acetate can degrade into a toxic chemical when vaped—and is responsible for causing mass pulmonary illness for thousands of consumers.
Researchers do not fully understand how this process occurs, but chemists from the Royal College of Surgeons in Ireland found in a recent study that the key is understanding how temperatures affect chemicals when vaping. Through a process known as pyrolysis, the study found that vitamin E acetate can possibly degrade into ketene when vaped at higher temperatures—depending on the type of coil resistance, voltage and temperature configuration used in a vaporizer device. (Ketene has a high pulmonary toxicity, and can be lethal at high concentrations, while low concentrations can cause central nervous system impairment.) Similar studies have also shown that additives like Propylene Glycol (PG), Vegetable Glycerin (VG), and Polyethylene Glycol (PEG) can degrade into toxic chemicals at high temperatures—which has led Colorado to ban the use of PEG for inhalable cannabis products altogether.
More shocking, is that such temperature control issues are not limited to additives. It is very common for experienced users to experiment with low to high temperatures when vaping cannabis; it is believed that vaping cannabis at low temperatures (325-350°F) results in a mild high, while vaping cannabis at higher temperatures (400-430°F) results in a more euphoric feeling and intense high. But when cannabis is vaped at even higher temperatures (450°F +), industry experts do not really know if or how cannabinoids and terpenes degrade, which combinations of cannabinoids and terpenes affect degradation and what the health risks could be. It’s anyone’s guess.
Cheap batteries with the universal 5/10 thread can heat the product at inconsistent temperatures, raising safety and quality concerns
These temperature control issues are further complicated due to the universal 5/10 thread. Most consumers purchase cannabis oil through pre-filled “carts” (cartridges)—that are compatible with 90% of vaporizer batteries on the market because of universal 5/10 thread connectors. But vaporizer batteries can operate anywhere from sub-300 degrees to 800 degrees and above. Coupled with varying battery voltages, ceramic coil quality and oil quality, vaporizer batteries can produce a wide range of operating temperatures. Consequently, it is possible users could connect a cart to a vaporizer battery (set at too high a temperature configuration) and risk pyrolysis, change the chemicals inside their cannabis cart, and cause unknown harm to themselves.
Unquestionably, all of the above will result in lawsuits. Companies that manufacture cannabis oil will be sued for failing to conduct emissions testing to properly evaluate safe temperature settings for use of their carts. Vaporizer device manufacturers will be sued for failing to publish warnings, instructions and adequate owner’s manuals regarding the same. And the rallying cry against the cannabis vapor industry will be damaging. Plaintiff’s attorneys will accuse the industry of choosing profits over safety: “The cannabis vapor industry knew cannabis oils could turn into toxic chemicals when heated at high temperatures, but instead of conducting long-term emissions testing to evaluate those concerns, the industry chose profits over safety. As long as the industry made money, no one cared what dangers arose from elevated temperatures—and consumers paid the price.”
With the above as background, it is critical for the cannabis vapor industry to get serious about product testing. The industry needs to know if and why certain cannabinoids, terpenes and additives can turn into toxic chemicals when they are vaporized at high temperatures—and how the industry can guard against such dangers. And to cover their bases, the industry needs to publish proper warnings and owner’s manuals for all products. The time to act is now.
Hazard Analysis and Critical Control Points (HACCP) is a systematic approach that evaluates hazards that may potentially be present in food products that can harm the consumer. The process used to manufacture the product is evaluated from raw material procurement, receiving and handling, to manufacturing, distribution and consumption of the finished product1. The documented process is what is known as HACCP plan. Although HACCP was designed to evaluate hazards in foods, it can be used to assess or evaluate hazards that may potentially be present in cannabis consumable products (edibles and vaping) that can cause harm to the consumer.
HACCP plan development requires a systematic approach that covers 5 preliminary steps and 7 principles. A systematic approach means that each step must be followed as outlined. Skipping a step will result in a HACCP plan that most likely will be ineffective to control potential hazards in the product.
The 5 preliminary steps are:
Establish a HACCP team
Describe the product
Establish the intended use of the product
Develop a flow diagram
Verify the flow diagram
The 7 Principles are:
Conduct a hazard analysis
Identify the critical control points (CCPs)
Establish critical limits (CL)
Establish monitoring procedures
Establish corrective actions
Establish verification procedures
Establish records and record keeping procedures1,2
It is important to mention that HACCP plans are supported by programs and procedures that establish the minimum operational and sanitary conditions to manufacture safe products. These programs and procedures are known as pre-requisite programs (PRP) or preventative controls1,2.
Figure 1. Flow Diagram
A multidisciplinary team must be established in order to ensure that all inputs of the product manufacturing process are considered during the hazards analysis discussions. The description of the product and its intended use provides detail information on ingredients, primary packaging material, methods of distribution, chemical characteristics, labeling and if any consumer might be vulnerable to the consumption of the product. A verified flow diagram is an accurate representation of the different steps followed during the product manufacturing process and will be used to conduct a hazard analysis. An inaccurate flow diagram will set the stage for an inadequate HACCP plan. Therefore, it is important that the HACCP team members verify the flow diagram. Figure 1 is a flow diagram for a fictional infused apple juice manufacturing plan that I will be using as an example.
The hazard analysis is the backbone of the HACCP plan. There are two elements that must be considered when conducting the hazard analysis:
Identification of the hazard associated with the ingredient(s) and/or the product manufacturing steps. These hazards have been categorized as: Biological, chemical (including radiological) and physical. Biological, chemical and physical hazards should be considered for each ingredient, primary packaging and process step. Also, it is important that the team is specific as to what hazard they are referring to. I often find that biological hazards are identified as “pathogens” for example. The team has to be specific on which pathogen is of concern. For example, if you are processing apple juice, the pathogens of concern are pathogenic coli and Salmonella sp. However, if you are processing carrot juice, you need to add Clostridium botulinum as a biological hazard also. If the choice of method to eliminate the hazards is pasteurization for example, the processing temperature-time combinations will differ greatly when manufacturing the apple juice vs. the carrot juice as C. botulinum is an organism that can sporulate and, therefore, is harder to kill.
Characterization of the hazard. This implies determining the significance of the potential hazard based on the severity of the consequence if it is consumed and the likelihood of occurrence in the ingredient or process step. Only steps in the process that has significant hazards should be considered further.
Table 1. Ingredient Hazard Analysis
In my professional experience, the hazard analysis is one of the most difficult steps to achieve because it requires the expertise of the multidisciplinary team and a lot of discussion to get to the conclusion of which hazard is significant. I find that a lot of teams get overwhelmed during this process because they consider that everything in the process may represent a hazard. So, when I am working with clients or providing training, I remind everyone that, in the bigger scheme of things, we can get stricken by a lighting in the middle of a thunderstorm. However, what will increase our chances would be whether we are close or not to a body of water for example. If I am swimming in the middle of a lake, I increase my chances to get stricken by the lighting. In comparison, if I am just sitting in my living room drinking a cup of coffee during the thunderstorm, the likelihood of being stricken by a lighting is a lot less. The same rationale should be applied when conducting the hazard analysis for manufactured products. You may have a hazard that will cause illness or death (high on the severity chart) but you also may have a program that mitigates the likelihood of introducing or having the hazard. The program will reduce the significance of the hazard to a level that may not need a critical control point to minimize or eliminate it.
Table 2. Process Hazard Analysis (1)
Clear as mud, right? So, how would this look like on the infused apple juice example? Table 1 shows the hazard analysis for the ingredients. Tables 2 and 3 show the hazard analysis for the part of the process. In addition, I have identified the CCPs: Patulin testing and pasteurization. There is a tool called the CCP decision tree that is often used to determine the CCPs in the process.
Once we have the CCPs, we need to establish the critical limits to ensure that the hazard is controlled. These limits must be validated. In the case of Patulin, the FDA has done several studies and has established 50 ppm as the maximum limit. In the case of pasteurization, a validation study can be conducted in the juice by a 3rd party laboratory. These studies typically are called thermal death studies (TDS) and provide the temperature and time combination to achieve the reduction of the pathogen(s) of concern to an acceptable level that they do not cause harm. In juice, the regulatory requirement is a 5-log reduction. So, let’s say that the TDS conducted in the infused apple juice determined that 165°F for 5 seconds is the critical limit for pasteurization. Note that the 5 seconds will be provided by the flow of the product through the holding tube of the pasteurizer. This is measured based on flow in gallons per minute.
Table 3. Process Hazard Analysis (2)
Monitoring is essential to ensure that the critical limits are met. A monitoring plan that outlines what, how, when and who is responsible for the monitoring is required.
Ideally, the system should not fail. However, in a manufacturing environment, failures can happen. Therefore, it is important to pre-establish steps that will be taken to ensure that the product is not out of the control of the facility in the event of a deviation from the HACCP plan. These steps are called corrective actions and must be verified once they are completed. Corrective actions procedures must address the control of the product, investigation of the event, corrective actions taken so the deviation doesn’t reoccur and product disposition.
Table 4. HACCP Plan Summary
Verification activities ensure that the HACCP plan is being followed as written. Typically, verification is done by reviewing the records associated with the plan. These records include but are not limited to monitoring records, calibration records, corrective action records, and preventive maintenance records for equipment associated with the CCPs. Record review must be done within 7 working days of the record being produced.
Finally, establishing records and record keeping procedures is the last step on developing HACCP plans. Records must be kept in a dry and secure location.
Table 4 show the summary of the HACCP plan for the infused apple juice example.
For more information on how to develop a HACCP plan for your facility, read the resources below:
The year 2020 may become a pivotal year for cannabis operators and service providers, including increased access to financial services, and increased exposure to product liability lawsuits. On a positive note, if enacted, the Secure and Fair Enforcement Banking Act of 2019 (SAFE Banking Act) promises to enable cannabis businesses to gain access to financial services previously unavailable to them, including banking and insurance services. The House of Representatives passed the SAFE Banking Act of 2019 on September 25th, 2019. Skopos Labs, an automated predictive intelligence service, predicts there is a 52% chance of the SAFE Banking Act of 2019 becoming law. A recent discovery that vitamin E acetate is likely the culprit in the vaping-related illness epidemic may increase the exposure to costly litigation that cannabis businesses face.
An uptick in litigation like that currently affecting the vaping industry may soon affect cannabis businesses. More litigation affecting the vaping industry is due in large part to the growing number of lung injuries and deaths linked to vaping. As of November 13th, 2019, the CDC reported 2,172 cases of lung injury, and 42 deaths linked to vaping. The cases of lung injury and death have predictably resulted in an increase in litigation facing the vaping industry. Most of the plaintiffs in these cases allege they became addicted to vaping but at least two lawsuits go further. In one, a Connecticut man alleges that he suffered a massive, debilitating stroke as a result of vaping, while in another the parents of a teenage girl allege in a proposed class action suit that their daughter has suffered seizures linked to vaping. On November 14th, 2019, the CDC identified vitamin E acetate as a chemical of concern among people with vaping use associated lung injury. Vitamin E acetate is an additive commonly used as a cutting agent in vape cartridges. About 86% of individuals who have either vaping-related lung injuries, or died due to vaping had used a product containing THC.
The increase in perceived exposure cannabis businesses face has increased their interest in obtaining insurance, but unfortunately insurers are not always interested in insuring them. There are at least two reasons that getting insurance can be difficult for cannabis businesses: (1) insurance industry appetite for cannabis risk is very low due to its status under federal law and (2) express coverage exclusions or limitations of cannabis exposures from standard-form coverage are becoming more common. However, even if cannabis businesses are able to obtain insurance, their insurance may cover them for far less than they believe.
The product liability coverage (which is increasingly crucial for both growers and manufacturers given the mounting litigation facing the vaping industry) may cover far less than it at first appears. The interplay of exclusions and limited coverages in many cannabis-specific policies may leave a cannabis business uninsured.
It is vital now more than ever to ensure you are properly protected against loss.Crucial for cannabis businesses to appreciate is the distinction between “occurrence” and “claims-made” coverage triggers as it relates to both the premises on which cannabis businesses operate their business, and the products they sell.
Many cannabis businesses have an occurrence-based general liability insurance that might actually exclude: (1) product-liability risks; (2) any tobacco-related risks; and (3) any risk associated with governmental investigation or enforcement. These exclusions oftentimes concern cannabis businesses because there is a high likelihood one of these risks could manifest itself as an uninsured loss. Still, the costs of eliminating these exclusions in an occurrence-based general liability insurance policy is often large, assuming an insurer is willing to eliminate the exclusions on an occurrence basis at all. Therefore, cannabis businesses often pair their general liability insurance policy with a “claims-made” coverage trigger for products liability. Navigating the waters of managing the differences between “occurrence” and “claims-made” forms are best left to a qualified and experienced insurance professional.
Consult a local insurance professional that understands how to help your business become properly protected in what would be considered a tumultuous market for this burgeoning industry.
It is vital now more than ever to ensure you are properly protected against loss. As a first step, you must determine what your current insurance policy does and does not cover. After a loss, it is too late to change policies. Rely upon someone that knows the market of insuring this industry and has deep experience in managing both occurrence and claims-made policies.
As the legalization of cannabis continues to spread across the U.S., both THC and CBD products are rapidly growing in popularity, and we can expect that popularity to increase in the coming years. The cannabis industry alone is expected to account for nearly $16.9 billion in revenue this year.
Subsequently, there is a rising need among infused product manufacturers for sufficient filling machinery for CBD and THC products. These products, including CBD oil cartridges, require filling equipment that can provide quick turnaround, detailed parts and simple changeover and cleanup, among other factors. Let’s go over the different types of filling machinery used for these products.
Vial Filling Machines
For small vial packages made of glass, metal or plastic, vial filling machines are available. Often used for a variety of pharmaceutical products, they’re now suitable for filling liquid THC and CBD oil. Vial fillers are also often suitable for filling liquid products of varying viscosity levels, with either the installation of peristaltic pumps or volumetric filling stations.
Rotary Fillers
Rotary fillers can also fill containers at high speeds and with quick turnaround, and are ideal for filling various types and sizes of containers made of materials such as plastic, metal or glass. A good rotary filler will be able to meet the demands of high-speed environments consistently and with accuracy.
Fixed or Variable Volume Cartridge Filling ToolsAs the industry develops more demand for high-quality filling and other types of equipment, more machines are likely to be manufactured or configured specifically with these types of products in mind.
Fixed and variable volume cartridge filling tools often feature a single-handed operation and are used to rapidly fill cartridges for THC and CBD oils used for vaping. With fixed volume fillers, you’ll be able to designate a specific and consistent volume, while variable volume models allow for different fill volumes for applications requiring versatility.
Automatic Fillers
Automatic filling machines will be able to fill a large number of products at varying speed settings, without the need for manual operation. These machines can fill many different types of products with consistency that helps maintain optimal productivity. As with other fillers, automatic fillers are often customizable in a wide variety of configurations.
Filling Syringes
For concentrates, filling syringes are ideal in many cases. Many patients are in need of a specific dosage of oil, and a syringe can allow for accuracy through the inclusion of measurement indicators. Many dispensaries sell syringe units, so this type of packaging method is likely to continue to rise in popularity.
Other Types of Equipment for Liquid Cannabis Packaging
In addition to reliable filling systems, manufacturers should make sure every other aspect of their packaging lines is covered with high-quality equipment. Facilities will require a variety of conveyors to transport products from one end of the line to the other, cleaners to ensure that bottles or other containers are clean prior to filling, and labelers to apply custom labels to packaging, among other machinery.
With one or more of these types of liquid fillers in a facility, companies can maintain accuracy and efficiency throughout their operations when filling CBD or THC products. As the industry develops more demand for high-quality filling and other types of equipment, more machines are likely to be manufactured or configured specifically with these types of products in mind.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
