Earlier this month, the House passed HB 1438 in a 66-47 vote, with bipartisan help. Roughly 24 hours before that, the same bill cleared the Senate in a sweeping 38-17 vote. Governor J.B. Pritzker signed the Cannabis Regulation and Taxation Act (CRTA) into law on Tuesday, making Illinois the 11th state in the nation to legalize adult use cannabis and the first to do so via the legislature.
Illinois Governor J.B. Pritzker campaigned and won the election on this issue and helped design HB 1438. Sponsors of the bill, Senator Heather Steans (Chicago-D) and Representative Kelly Cassidy (Chicago-D), along with Governor Pritzker, have been viewed as the architects of this piece of legislation.
Some supporters say the state legalizing cannabis in this particular fashion will have shockwave effects throughout the rest of the country. Not only did Illinois pass this legislation, but they did so with social equity and public health in mind. Back when the sponsors of the bill announced their intentions in January this year, Sen. Steans told a town hall meeting in Springfield, “We have a huge opportunity in Illinois to do this right and carefully… If we don’t address the social-justice issues of this, if we don’t address the collateral consequences of the ‘war on drugs,’ we will have failed.”
The Marijuana Policy Project (MPP) has a handy overview of the legislation that breaks down exactly what was legalized. An MPP press release says this legislation is, “the most far-reaching social equity provisions ever included in a legalization law. It includes reinvestment in communities disproportionately harmed by cannabis prohibition, broad expungement provisions, and measures to ensure the industry includes communities that have been targeted by cannabis enforcement.”
Fouser Environmental Services LTD, a laboratory based in Versailles, Kentucky, became the first cannabis testing laboratory accredited in the state last week, according to a press release. The American Association of Laboratory Accreditation (A2LA) announced the lab’s successful accreditation to ISO/IEC 17025:2017.
“We congratulate Fouser Environmental Services on becoming the first cannabis testing laboratory accredited in the state of Kentucky. Their completion of this milestone in such a timely manner through the A2LA accreditation process is a testament to their hard work and commitment to quality”, says Adam Gouker, A2LA General Manager. “A2LA realizes the vital role that accreditation plays in the cannabis industry to support compliance with regulatory requirements, and we are thrilled to see that our service has been adopted in a new state. We look forward to our continued relationship with Fouser Environmental Services in the provision of their accreditation needs.”
Fouser Environmental Services has been an environmental testing lab in Kentucky for more than 30 years. A statement by the lab in the press release says they want to support the hemp industry as it continues to grow in Kentucky. “It is our great honor to be the first A2LA ISO/IEC 17025:2017 accredited laboratory for cannabis testing in the Commonwealth as we continue to strive to perform accurate analysis and release reliable data to the growing hemp industry within Kentucky and throughout the country,” reads the press release.
Whether your cannabis business is a start-up in its infancy, or established with a loyal customer following, the product packaging you use is essential to building and maintaining your brand. The packaging is the first thing a potential customer sees, and it creates that critical first impression. While the primary function is to contain, protect, and market your products, your packaging is a reflection of your company to the customer. In many ways, the package is the product. Partnering with a quality plastic packaging manufacturer for your cannabis products will increase your success.
Bottles made of high-density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), and polyethylene terephthalate (PET) have become widely-accepted packaging options within the cannabis industry. There are many plastic bottle manufacturers, but how do you find the right one? In short, seek a manufacturer who makes quality products that are unlikely to present downstream problems for your company, provides services and options that align with things you feel are important, and wants to build a long-term relationship with you so both of your businesses grow faster through strategic partnership.
What to Look for in a Plastic Bottle Manufacturer
Excess Bottom Flash creates a poor printing surface.
As you search for a packaging partner for your cannabis business, here are a few key things to look for:
Bottles That Visually Support Your Brand
It’s essential to partner with a manufacturer who understands the importance of defect-free plastic bottles. Does everything about your packaging convey a sense of trust for your customers? Defects in plastic bottles typically occur during the manufacturing process.
Excessive Side Taper results in uneven, wrinkled labels.
For instance, excessive side taper on the bottles can result in uneven, wrinkled labels that are hard to read and make your product look unprofessional. If flashing on the bottle bottom is not removed, it creates a poor printing surface and results in a poor brand impression.
Partnering with a manufacturer who understands that plastic bottle defects diminish brand presence and who continually strives to remove defect-producing problems out of their manufacturing process is of utmost importance. This avoids many downstream quality problems and helps to keep the focus on growth and off of damage control.
Bottles That Minimize Risk and Waste
Product recalls or safety concerns can be a result of cloudy bottles or material trapped in the resin that makes the plastic packaging look dirty or contaminated. These situations can erode consumer confidence in your brand or expose the customer to risk.
Foreign material trapped in the resin results in reduced customer confidence.
Sub-par plastic bottles can lead to inefficiencies on your filling lines, lost production time, and product that cannot be sold. These situations lead to reduced profitability and negatively impact your bottom line. It’s never good when filled packaging or product has to be thrown away because problems are identified on the filling line.
Uneven Sealing Surface results in poor closure seal and increased risk of product spoilage or contamination.
Worse yet is when your product reaches the point of sale and the problems are identified at the dispensary or by a consumer. For example, over time, an improper seal between the plastic bottle and cap can cause flower to be excessively dry. In turn, when this flower is dispensed to the consumer it can lead to overfilling to make up for weight loss. And some consumers just don’t like their flower to be too dry, resulting in lost sales. Does the defective product get shipped back or trashed at the point of sale location? In either case, this results in the dilemma of wasted product that can’t be used and extra costs that eat into your profitability.
Closures That Work With The Bottle
The closures for the bottles are also an important part of your cannabis packaging. Can your packaging partner manufacture and supply plastic closures that assure complete functionality to protect your product? Closures produced by the same manufacturer as the bottles ensures that the closure and bottle function correctly together. A one-stop-shop approach will save you time and money.
The cannabis industry is growing quickly and faces many complex regulatory challenges, including regulations for child-resistant packaging. Many states have their own unique cannabis packaging requirements which must be strictly adhered to. Are their bottle and closure pairings compliant with current regulations and those that are under legislation for the future?
Customization for Your Brand
Can the cannabis packaging manufacturer customize their products to your exact design and specifications? Your product is unique, and your packaging should reflect that. Make sure your brand stands out with the exact image you want to project. There should be “depth” in your supplier: can they do more than just sell you packaging that already exists?
A Safe Resin Source
Another important aspect of safety is country of origin. Plastic bottles and closures manufactured overseas may have impurities in the resin or colorant that could leach or bleed into your products. They may not have documentation of origin or comply with FDA regulations. Your plastic packaging partner should be able to provide this documentation so you can rest assured that your bottles are manufactured under strict guidelines for the safety of your consumers and that your product won’t be affected.
Commitment to Sustainability
To many consumers, packaging made from recycled materials is important. Does your packaging supplier have a strong commitment to environmental sustainability? There is strong market support for carbon-friendly alternatives. Progressive plastic packaging manufacturers are actively working to provide alternatives to plastics made from fossil fuels and instead, using resins produced from renewable resources (i.e. sugarcane). By partnering with a supplier that provides alternative and recycled materials, you enhance your brand by appealing to a growing segment of environmentally concerned consumers.the best cannabis packaging suppliers understand that consistency in the manufacturing process is essential.
Scalable Growth
As your business grows, can your packaging partner grow with you? It’s important that they are able to keep up with the demand for your product and that their supply chain can match your manufacturing needs. As you add to your product line, are they capable of continuing to offer new and innovative packaging? A manufacturer that has a strong business model for growth will benefit you now and for the future.
A Real Cannabis Packaging Partner
Your cannabis business should develop a true partnership with your packaging supplier. They should invest in your success and care about your business. Businesses depend on one another for continued growth – look for a knowledgeable partner that is responsive, courteous and dependable now and for years to come. The best suppliers realize that there is more to a relationship than just the financial transaction of buying packaging.
Additionally, the best cannabis packaging suppliers understand that consistency in the manufacturing process is essential. Using virtually perfect bottles time after time not only reduces waste but helps build consumers’ trust in your brand. Consistency saves you three precious commodities – time, hassle and money.
Remember, a brand consists of more than just a logo and company name. It identifies who you are, what your company stands for and the integrity of your product. Quality cannabis packaging will reinforce your company standards and attract consumers to your product – consistently defining you as a quality provider with integrity in the marketplace. Improving your bottom line and meeting your company’s financial goals is at stake. Is your cannabis packaging partner going to help you grow?
This summer, as new distributors continue to get into the cannabis game (in Germany, the UK and beyond), and at least two countries (Greece and Macedonia get GMP-certified), the battle is now on not just for cultivation and distribution licenses, but the end point of sale, pharmacies.
Pharmacies were always going to play a large role in cannabis distribution in Europe, starting with the fact that there will not be a separate “dispensary” system (as there is in the United States and Canada). Further, in some jurisdictions, notably Germany, the idea of the “apotheker” is one that is not going to go away anytime soon. No matter how intriguing the concept of online pharmacies actually are to everyone else (see the British).
Further, the shift to what is widely being referred to as “tele” or “digital” health is only going to increase in prevalence as discussions continue. Cost and access (to all medications, not just cannabis) are an issue near and dear to the average European. So is the right and consumer safety issues of being able to consult with a local pharmacist, who might even know you personally, and can advise on the health effects of the medicines they pass over the counter.
Photo: Ian McWilliams, Flickr
Jens Spahn, the current Health Minister of Germany, is touting a move to personal management of health records and digital prescriptions by next year. However, nobody knows exactly what that means, much less the functionality of the same.
Further, the German pharmacy situation in particular is one that has implications across Europe no matter how aggressively “digital health” solutions are implemented here. By law, no more than three (in some rare cases four) brick and mortar pharmacies can be owned by the same owner. There is no such thing as “Boots” (a British chain) or “Walgreens” (an American one).
Doc Morris, the Dutch online pharmacy, has always been an option for Germans just across the border. The problem of course is that insurers so far have been refusing to pay for critical parts of this idea. The company is currently experimenting with working with insurers- but do not expect the average chronically ill person in any country to suddenly get expedited access. So far, the only innovations in this market have hit as the privileges of the privately insured.
Second class status (and significantly lagging behind those with private healthcare) is also very much in the room as a political issue- and cannabis access has only sped this up.
If the scenario in the EU two years ago could be described as the race for import licenses and cultivation rights, this year, the focus of the big guys is very much trying to mainstream their product and get it on as many “shelves” as possible.
In Europe, however, since nobody can ship straight to the patient (as in Canada), the next most obvious step is securing access to pharmacies.
The Cannabis Industry Cometh
Even before Aphria announced its purchase of CC Pharma (one of Germany’s largest distributors) in a deal that finally closed in January of this year, the larger companies have been looking for a more efficient supply chain situation. Owning a distributor is certainly one way to go about this.
As of May 2019, Aleafia Health and its wholly owned subsidiary, Emblem, entered a JV with Acnos Pharma GmbH – with access and reach to 20,000 German pharmacies. And Wayland announced its merger with ICC, with pharmacies across the world.
As early as October 2017, Tilray and Cronos together tried to storm the German market (by inking a deal to reach the 20k plus pharmacies in the German system). Two years later, and this still has not made a huge difference in access.
Regardless of these larger industry players, however, or perhaps so far because of their statements and the resulting continued lack of access for most patients, it is also fact, particularly in both Germany and the UK, that merely having relationships with pharmacies is not enough. This year, there is also a fairly major price drop in the cards for the cannabis industry. And while the larger players may blanket the market with relationships, actually providing access to GMP-certified medical cannabis at a decent if not competitive price, is going to continue to have an impact on every market, particularly in those situations where compliant online access can be connected to indie distribution.
It is also an environment where the advantage still does not necessarily go to the “big guys” – a strategy that Wayland, for one, has been playing strategically for the better part of the last two years better than any other Canadian in the market. Especially when supply chain issues, beyond price, are still in the room.
Right now, pharmacies are well aware of their growing influence in this space in Europe. How much of an influence they will continue to have however, also rests on how effectively they preserve their right to have such an influence on the end consumer (as in Germany) or not (see the many discussions about this issue in the UK right now).
Further, as many of these entities are also realizing, and this is true far beyond the cannabis discussion, pharmacies are increasingly caught in the middle between consumer, doctor and insurer (this is certainly the case both for cannabis and also for all expensive orphan drugs).
How the pharmacies, in other words, begin to solve other issues, beyond just having a contractual relationship with a cannabis distributor/producer, is very much a part of the conversation right now. Access to cannabis via distribution deals with a Canadian or even Israeli partner certainly helps sales but it does not guarantee them.
One thing is for certain. The impact of new privacy legislation is having an effect, so even in an environment where a distributor/producer buys a pharmacy, what they can then do with customer information they also might have been interested in purchasing, is not only highly limiting, but in the future it may be the best approach to handling liability, and from multiple directions that includes everything to access to affordable, certified product to cyber security issues.
To reinforce the ideas in the article, Sanitation Starting Points: More Than Sweeping the Floors and Wiping Down the Table, the main goal of sanitation is to produce safe food and to keep consumers healthy and safe from foodborne illness. With the cannabis industry growing rapidly, cannabis reaches a larger, wider audience. This population includes consumers most vulnerable to foodborne illness such as people with immunocompromised systems, the elderly, the pregnant, or the young. These consumers, and all consumers, need and deserve safe cannabis products every experience.
Sanitation is not an innate characteristic; rather, sanitation is a trained skill. To carry out proper sanitation, training on proper sanitation practices needs to be provided. Every cannabis food manufacturing facility should require and value a written sanitation program. However, a written program naturally needs to be carried out by people. Hiring experienced experts may be one solution and developing non-specialists into an effective team is an alternative solution. Note that it takes every member of the team, even those without “sanitation” in their title, to carry out an effective sanitation program.
Sanitation is a part of the Food and Drug Administration’s Code of Federal Regulations on current Good Manufacturing Practices (GMPs) in manufacturing, packing or holding human food (21 CFR 110). Sanitation starts at the beginning of a food manufacturing process; even before we are ready to work, there are microorganisms, or microbes, present on the work surfaces. What are microbes? At a very basic level, the effects of microbes can be categorized into the good, the bad, and the ugly. The beneficial effects are when microbes are used to produce cheese, beer or yogurt. On the other hand, microbes can have undesirable effects that spoil food, altering the quality aspects such as taste or visual appeal. The last category are microbes that have consequences such as illness, organ failure and even death.In a food manufacturing facility, minimizing microbes at the beginning of the process increases the chance of producing safe food.
Proper sanitation training allows cannabis food manufacturing facilities to maintain a clean environment to prevent foodborne illness from affecting human health. Sanitation training can be as basic or as complex as the company and its processes; as such, sanitation training must evolve alongside the company’s growth. Here are five key talking points to cover in a basic sanitation training program for any facility.
Provide the “why” of sanitation. While Simon Sinek’s TEDx talk “Start with why” is geared more towards leadership, the essential message that “Whether individuals or organizations, we follow those who lead not because we have to, but because we want to.” Merely paying someone to complete a task will not always yield the same results as inspiring someone to care about their work. Providing examples of the importance of sanitation in keeping people healthy and safe will impart a deeper motivation for all to practice proper sanitation. An entertaining illustration for the “why” is to share that scientists at the University of Arizona found that cellphones can carry ten times more bacteria than toilet seats!
Define cleaning and sanitizing. Cleaning does not equal sanitizing. Cleaning merely removes visible soil from a surface while sanitizing reduces the number of microorganisms on the clean surface to safe levels. For an effective sanitation system, first clean then sanitize all utensils and food-contact surfaces of equipment before use (FDA Food Code 2017 4-7).
Explain from the ground up. Instead of jumping into the training of cleaning a specific piece of equipment, start training with the foundational aspects of food safety. For example, a basic instruction on microbiology and microorganisms will lay down the foundation for all future training. Understanding that FATTOM (the acronym for food, acidity, temperature, time, oxygen and moisture) are the variables that any microorganism needs to grow supplies people with the tools to understand how to prevent microorganisms from growing. Furthermore, explaining the basics such as the common foodborne illnesses can reinforce the “why” of sanitation.
PPE for all employees at every stage of processing is essential
Inform about the principles of chemistry and chemicals. A basic introduction to chemicals and the pH scale can go a long way in having the knowledge to prevent mixing incompatible chemicals, prevent damaging surfaces, or prevent hurting people. Additionally, proper concentration (i.e. dilution) is key in the effectiveness of the cleaning chemicals.
Ensure the training is relevant and applicable to your company. Direct proper sanitation practices with a strong master sanitation schedule and ensure accountability with daily, weekly, monthly and annual logs. Develop sanitation standard operating procedures (SSOPs), maintain safety data sheets (SDS’s) and dispense proper protective equipment (PPE).
Overall, sanitation is everyone’s job. All employees at all levels will benefit from learning about proper sanitation practices. As such, it is beneficial to incorporate sanitation practices into cannabis food manufacturing processes from the beginning. Protect your brand from product rework or recalls and, most importantly, protect your consumers from foodborne illness, by practicing proper sanitation.
The steady destigmatization and legalization of medical and recreational cannabis at the state level continues to propel a large and fast-growing industry forward. In 2018, the legal cannabis industry grew to $10.4 billion in the U.S., employing more than 250,000 people according to New Frontier Data.
The mass production of anything that humans consume is invariably accompanied by an increased concern for safety and accountability—especially in the case of cannabis, which the federal government still deems a Schedule I substance. Each U.S. state has its own mix of laws based on the will of its voters, spanning the spectrum from fully legal to fully illegal.
While the mix of legality in states can be hard to keep up with, all states with any form of cannabis legalization have one thing in common: the need to regulate this new industry. Last year, the federal government issued a Marijuana Enforcement Memorandum that allows federal prosecutors to decide how to prioritize enforcement of federal marijuana laws, so states are at risk.
If you are a public official involved in state cannabis regulation, or anyone involved in the supply chain from cultivator to dispensary, chances are you are using some kind of seed-to-sale tracking technology to monitor things like plant inventory, sales volume, chain of custody—and to hedge against federal encroachment by having a legitimate form of accountability.
Mandatory Request For Proposals (RFPs) issued by states for compliance solutions have spawned an entire sub-industry of seed-to-sale tracking, and point-of-sale hardware and software vendors, with large multi-million dollar contracts being awarded. Metrc’s RFID (Radio Frequency Identification) plant and packaging tags are gaining wide usage, and 11 states plus DC have adopted the technology.
While states are taking the right steps to keep their legal cannabis industry legitimate and accountable, there is actually a major gap that existing systems don’t cover: cultivation management. Most of the existing RFPs and platforms focus on the post-harvest side of the business (processing, packaging, distribution) and may have some cultivation management capability, but are not geared for the cultivation operation, which is where a lot of the risk actually lies for both growers and state regulators.
As a state official or a cultivator, what could be more damaging to business than a massive product recall—especially after the product has been distributed and consumed? This is the fastest way to get shut down or audited by the state as a grower or invite federal investigation if you’re a state. And these recalls cost growers millions of dollars and possibly their license. There is massive risk involved by not addressing the cultivation side.
A plant tagged with a barcode and date for tracking
With current tracking systems, it’s possible to see where the product came from in the event of such a recall, but nearly impossible to pinpoint and see what actually happened and when the recall happened. This makes it almost impossible to stop the same problem in the future and puts consumers at unnecessary risk.
The reason most seed-to-sale systems are difficult for growers to use is because they were designed for regulators to address the most obvious regulatory questions (are growers abiding by the law? Who is selling and buying what and how much? Is the correct tax amount being levied?). They were not designed for growers and in many cases, cultivation teams are using two systems—their own ERP and/or spreadsheets and seed-to-sale tracking mandated by regulators.
This means there is a huge missing link in data that should be captured during the cultivation process. In many cases, growers are tracking crop inventory during the growth stage with pen and paper, or at best, in Excel. Cultivators need a tool designed for them that helps both run better operations and identify hazards to their crop health before it’s too late, and regulators need complete traceability along the supply chain to reduce risk to consumers.
To fill this critical data gap, there is a strong case for states in their RFPs and ongoing regulatory capacity, to adopt and encourage cultivators to use Cultivation Management Platforms (CMPs) alongside any existing seed-to-sale and ERP solutions for complete traceability.
As more states move to legalize medical and recreational cannabis, mitigating risk as part of a larger regulatory framework will only become more important. Adopting and using a CMP empowers growers to focus on not just tracking data, but making that data accessible and functional for growers to drive efficiency and profits all while ensuring security and regulatory compliance in this rapidly evolving industry.
When a thriving cultivator purchased additional cannabis from a wholesale grower to meet the 5,000 pounds he was short, he was left holding the bag. A customer complained of a strong sulfur taste, and soon it was discovered that the wholesaler had applied the wrong pesticide concentration, rendering the cannabis unusable. The cultivator had to pull contaminated cannabis product from the shelves, a move that cost the company $3.5 million.
This story is not unique. When running short on product, cannabis businesses will often turn to other suppliers and partners to help them fulfill their orders. Unfortunately, improper vetting and a lack of understanding and compliance with state regulations and other requirements may lead to a loss of product integrity and costly product liabilities. Product liability can include more than just the cannabis itself, such as the equipment – vape cartridges, batteries, and lighters. This can quickly inflate the risk and, of course, the cost of a product liability claim.It is possible to transfer some of these cannabis risks to product liability insurance.
Top Three Product Liability Exposures Facing Cannabis Cultivators and Distributors
Three key areas of product liability exposure face cannabis business owners. It’s important to understand how each will affect your business.
Product contamination.When cannabis is sold in an edible form, business owners could face claims of food poisoning or illness. If the product is smoked, there are exposures to contamination, product mislabeling or misrepresentation, and possible health hazard claims related to long-term exposure to potential contaminants.
First party claims. Claims made in the event of an accident, injury or loss, whether caused by the business owner or someone else, will create another set of exposures, including manufacturing defects, failure to warn users on potential product usage hazards, improper labeling, or any product-related defect such as mold or odor.
Third party claims. Cannabis business owners could be liable for claims stemming from the use of their cannabis product that result in a DUI, property damage, loss of wages, medical expenses and bodily injury.
It is possible to transfer some of these cannabis risks to product liability insurance. While there are multiple lines of product liability insurance, you’ll want to make sure you choose one designed specifically for the cannabis industry. These policies may provide coverage for the following exposures:
Product contamination
Bodily injury damages
Fines and penalties for non-compliance with state regulation
Bodily or property injury caused to others by product misuse, or by a third party
Manufacturing or product-related defects
While product liability insurance covers a number of cannabis risks, it doesn’t cover them all. Cannabis operations require a variety of coverage – property, crime, general liability, worker’s compensationand crop insurance. Insurance carriers will differ in definitions, policy exclusions and coverage language for each policy.
Because designated cannabis product liability and business operations coverage is fairly new and the marketplace features a wide range of options, make sure to work with a broker who understands the fine print of your policies, and your unique needs. The right broker can provide advice and loss control to help you reduce product liability exposures, make product and risk management recommendations that best mitigate your exposures to prevent loss, and ensure the proper coverage to address potential claims.
Hold your hats and book your seats! The Limeys, no matter what they are doing on Brexit, are getting organized on the cannabis front. A unique coalition of “home-grown” as well as cross-European, American and Canadian industry insiders are already making travel plans for London during the last week of June.
Unlike Trump’s recent visit to the British capital, however, they are likely to meet nothing but enthusiasm if not a growing understanding in the British populace at large that the Great Green Cannabiz Has FINALLY Landed.
On the CBD “recreational” discussion, the entire enchilada is still being formed and reformed. A high-end CBD “pop up” shop opened in a ritzy part of London in January while a more crunchy CBD restaurant in the seaside town of Brighton was shuttered right as it planned to open. Just another innocent victim in all the fuss about novel food still working its way through the entire British conversation (as it is elsewhere in Europe, including most recently Germany and Italy), certainly, but hopefully one of the last.
However, for that very reason, enthusiasm is already high as organizers continue to add events even three weeks out.
What Is On The Agenda?
Check the event website for details and scheduling. There is also a lot that is not on the official website, but has clearly been organized around it. That includes a patient advocacy and policy formation gathering on Thursday being organized by the United Patients Alliance and other events not on the “official” ECW list (or website) but clearly all with the goal of networking, interacting and gaining ground (such as the internationally organizing Cannabis Tech Society).
The first two days are reserved (at least during the day) for Cannabis Europa – the “other” major European cannabis business conference that got its start in 2018 in London. Earlier this year, the event was also held to a standing room only audience in France. Organized by two of the leading cannabis consultancies in the UK who are making a clear play towards both North America and Europe- Prohibition Partners, and Hanway Associates, the event is primed to bring together those in the international industry curious about changing times and opening opportunities not only in the UK but across Europe.
The rest of the week, events are spread out across the city (and are already selling out). Of note on Wednesday is an investors conference as well as an introduction to the growing ranks of British doctors (one hopes for the future of nascent doctor training programs everywhere across Europe, without borders), even if nascent at the moment, who are joining the medical cannabis crusade.
Thursday’s planned events also include a focus on connecting women in the industry to investors – particularly of the medical kind – and MedPayRx’s third pilot to market workshop (Unveiling The Digital Prescription). It will also include a ground-breaking seminar about cannabis certification for doctors at King’s College (long known for its critical studies about the supposed connection between cannabis and a host of nasty mental illnesses and conditions starting with schizophrenia).
There is also a round of private parties, events, industry soirees and more that are invite only. However, as with most cannabis industry events, showing up and tagging along is one of the best ways to network and meet people.
It will be a busy week, for sure.The entire cannabis debate is absolutely hitting in this space in the UK in a way that it has not in other places
Why Is This Significant?
The British are finally kicking off their version of “the industry.” That said, problems abound, including of the kind seen in places like Germany, with the added whiff of further disruptions thanks to a still-pending Brexit. On the healthcare discussion at least, it is hard to find a fan of the NHS in the ranks of average cannabis patients (who are still struggling to get their numbers over 100 for the entire country six months after Schedule II prescriptions were authorized). However, it is also equally hard to find anyone in the ranks of the chronically ill at least, who would welcome a more U.S. style approach to healthcare provision – even if they can avail themselves of private healthcare coverage. That is just 10% of the population.
The entire cannabis debate is absolutely hitting in this space in the UK in a way that it has not in other places (including Germany). This is, beyond Brexit discussions, in part a testament to the creakiness of the British system, although the German one at present also leaves a lot to be desired.
Nobody wants an “American” system. And the Canadians in the room are also dealing with the problem that so far, Canadian public health insurance does not cover medical cannabis either.
Like it or not, this is also a theme that colors cannabis politics in Europe as much as the industry does not know how to channel and harness it. The Green Vest movement is certainly alive and well in the UK. Nor should it be underestimated. And that resentment at the moment also is hitting some of the biggest industry players who are the only ones allowed market entry where it counts (the regulated ones including medical).
On the CBD front, despite assurances by activists as late as last year, and certainly overflowing enthusiasm about the potential of this market, novel food still applies.
Where the conversation will certainly get interesting is the ability to distribute through online pharmacies (unlike in Germany where this is still verboten– and for all drugs, not just cannabis). But even here, don’t look for the UK to become just another Amazon outlet. New rules, including GDPR, still affect the UK and will continue to do so no matter what happens in the fall. This has to do with what is called “trusted nation” status that affects regulatory issues including pharmaceuticals but also financials (which is why the idea of the UK sailing off entirely on its own or as an American subordinate state is also ludicrous).
Not to mention of course, that supply and demand has yet to be effectively linked anywhere in Europe.
Cannatech, beyond distribution platforms, will also become more of a focus in climate change conscious Europe.
And of course, with a focus in London, there will be a much greater opportunity for both the concentration of specialty equity and the industry itself (in English) that will impact issues across the continent.
In a nutshell, in other words, the week-long events in London (held in conjunction with an equally interesting gathering now coalescing in Berlin just the weekend before) is proof positive that not only is the European cannabis industry in the middle of another seismic year, but the British and German movements are connecting, coordinating, cooperating, and driving change both at home and elsewhere across the region.
Disclaimer: European Cannabis Holdings and Prohibition Partners are sponsors of MedPayRx and a business relationship exists between them.
There’s a better way to design HVAC for cannabis grow rooms, and it may seem a little odd at first.
Central chillers are a tried-and-true solution for projects requiring large refrigeration capacity. They’re found in college campuses, hospitals, office buildings and other big facilities.
While central chillers are a good default for most large-scale applications, they fall short in this industry. Grow rooms, with their need for tight, variable conditions and scalable, redundant infrastructure, have HVAC requirements that the central chiller model simply can’t deliver on.
Let’s unpack the shortcomings with the central chiller in this niche and explore some possible solutions.
What’s Wrong With Chillers?
Building a scalable HVAC system is essential for the cannabis industry as it continues to ramp up production in the U.S. and Canada.
Many growers are building their large facilities in phases. In Canada, this is common because growers must have two harvests before they can receive a production permit, so they build just one phase to satisfy this requirement and then build out the facility after the government’s approval.
This strategy of building out is less feasible with a central chiller.
Indoor cultivator facilities use high powered lights that give off heat, requiring an efficient air cooling system.
A chiller and its supporting infrastructure are impractical to expand, which means it and the rest of the facility needs to be built to full size for day one, even though the facility will be in partial occupancy for a long time. This results in high upfront capital costs.
If the facility needs to expand later down the road, to meet market demand for example, that will be difficult because, as mentioned, it’s expensive to add capacity to a central chiller.
Additionally, the chiller creates a central point of failure for the facility. When it goes down, crops in every room are at risk of potentially devastating loss. Grow rooms are unusual because of their requirement for strict conditions and even a slight change could have big impact on the crop. Losing control due to mechanical failure could spell disaster.
One Southern Ontario cannabis grower met with some of these issues after constructing their facility, which uses a central chiller for cooling and dehumidification. The chiller was built for full size, but the results were disappointing as early as phase one of cultivation. While sensible demands in the space are being easily met, humidity levels are out of control – flowering rooms are up to 75% RH.
Humidity is one of the most important control aspects to growers. Without a handle on it, growers risk losing their entire crop either because there’s not enough and the plants dry out, or there’s too much and the plants get mold disease. This facility has fortunately not yet reported serious crop issues but is mindful of the potential impact on harvest quality.
By going unitary, capital costs scale on a linear basis.If tight control over humidity is what you need, then a chilled water system needs very careful consideration. That’s because typical chiller system designs get the coils cold enough to lower the air temperature, but not cold enough to condense water out of the air as effectively as a properly designed dehumidifier coil.
A chilled water system capable of achieving the coil temperatures needed for adequate dehumidification in a typical flower room will also require full-time reheat to ensure that air delivered to the plants isn’t shockingly cold — either stunting their growth or killing them altogether. This reheat source adds complexity, cost and inefficiency which does not serve growers well, many of whom are under pressure from both utilities and their management to minimize their energy usage.
How Do Unitary Systems Solve These Problems?
Compared to central chillers, a unitary setup is more agile.
A facility can commence with the minimum capacity it needs for start-up and then add more units in the future as required. They’re usually cheaper to install than a central system and offer several reliability and efficiency benefits as well.
The real business advantage to this approach is to open up the grower’s cash flow by spreading out their costs over time, rather than a large, immediate cost to construct the entire facility and chiller for day one. By going unitary, capital costs scale on a linear basis.
One of the flowering rooms in an indoor set up (Image: Tall Trees LED Company)
Growers can have more control over their crop by installing multiple units to provide varying conditions, room-by-room, instead of a single system that can only provide one condition.
For example, flowering rooms that each have different strains of crop may require different conditions – so they can be served by their own unit to provide variability. Or, rooms that need uniform conditions could just be served by one common unit. The flexibility that growers can enjoy with this approach is nearly unlimited.
Some growers have opted for multiple units installed for the same room, which maximizes redundancy in case one unit fails.
A cannabis facility in the Montreal area went this direction when building their HVAC system. Rather than build everything in one shot, this facility selected a unitary design that had flowering rooms served independently by a series of units, while vegetation rooms shared one. The units were sized to provide more capacity than currently required in each room, which allows the grower to add more plants and lighting in the future if they choose.
This facility expects to build more grow rooms in a future phase, so it was important to have an intelligent system that could accommodate that by being easy to add capacity to. This is accomplished by simply adding more units.Multiple, small systems also have a better return-on-investment.
The grower, after making a significant investment in this facility, was also averse to the risk of losing crop due to mechanical failure, which is why they were happy to go with a system of independent grow room control.
Multiple, small systems also have a better return-on-investment. Not only are they easier to maintain (parts are easier to switch out and downtime for maintenance is minimal) but they can actually be more efficient than a large, central system.
Some units include heat recovery, which recycles the heat created by the dehumidification process to efficiently reheat the unit’s cold discharge air and keep the space temperature consistent, without needing expensive supplementary heaters. There’s also economizer cooling, which can be used to reduce or even eliminate compressor usage during winter by running the unit on dry outside air only.
Demand for cannabis continues to increase and many growers are looking to expand their businesses by adding new facilities or augmenting existing ones. Faced with the limitations of the traditional chiller system, like the lack of flexibility, scalability and redundancy, they’re looking for an intelligent alternative and the unitary approach is earning their trust. It’s expected this option will soon become the leading one across North America.
In a sign of how widely the German government is now casting its net for medical cannabis, even South America is not off the table. At the end of last month, two firms– one from Uruguay and another from Columbia- announced that they would begin importing medical cannabis of the THC and CBD kind.
Fotmer Life Sciences (from Uruguay) and Clever Leaves (Columbia) are entering a market where domestic cultivation has been on the drawing board for two years so far, but so far, brought down by lawsuits.
At present, Aphria, Aurora and Wayland are the big Canadians in front position on the German bid- but so far that is only importing. There are legal challenges against what appears to be the domestic cultivation licenses that appear so far to be unresolved. And against that backdrop, the big Canadians are also facing competition from indie German distributors now casting a wide net for product, globally.
Due to the timing of the announcement from South America and the firm involved in the import, CanSativa GmbH is clearly connected to the large gap in demand that is now developing in the German market and supply requirements. Further CanSativa is also a German firm engaged in what insiders on the ground admit is basically the only way to enter the market here right now, namely via an agreement with one of the new (and Frankfurt-based) distributors who are interested in this space.
Cannabis Central Is Not Berlin
To the great surprise of outsiders, who have long believed that Berlin is the center of all things cannabis in Germany, CanSativa is now one of quite a few firms who have not only called Frankfurt home, but have begun to put the city on the global cannabis map. That started of course with MedCann GmbH (later acquired by Canopy Growth), now with a huge new office in the center of the banking district.
However that also includes the now controversial Farmako, and several other new distributors who are setting up shop with a “Mainhatten” address.
Why Frankfurt? It has one of the best and busiest airports in the world just 20 minutes from the center of the city, and of course, it is home to the Deutsche Börse, the center of not only German, but European finance.
What Does This Announcement Mean?
For those interested now in setting sail for Europe, there is clearly a strategic path to get there, even if it means picking up stakes and setting down cultivation roots in places where there is an ex-im market. While the announcement about Latin American exports is not unexpected, it is also surprising that the very competitive young distributors now popping up in Germany, in particular, cannot find closer sources to bring cannabis into the country from.
However, it is early days yet. The Israelis are coming as of this summer. German inspectors are also on the ground in Macedonia through June, certifying the early movers in the market there to begin importing presumably just before Israel enters the global ex-im business, finally.
There will also be an uptick in firms exporting at least medical grade (GMP-certified) CBD and hemp in the direction of Europe from the United States, although at present that traffic is a trickle as firms begin to find out about the possibility.
Regardless of the source, however, the news is yet another sign that the medical market is taking root, no matter how ambiguous the numbers still are, and no matter how hard it is on the ground to obtain.
Cannabis is now, indeed, entering Europe via Germany from all over the world, and it’s only going to get hotter this year.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
