Tag Archives: business

March 21, 2018

Maintenance and Calibration: Your Customers Are Worth It!

By Vince Sebald

Ultimately, the goal of any good company is to take care of their customers by providing a quality product at a competitive price. You take the time to use good practices in sourcing raw materials, processing, testing and packaging to make sure you have a great final product. Yet in practice, sometimes the product can degrade over time, or you find yourself facing costly manufacturing stoppages and repairs due to downed equipment or instrumentation. This can harm your company’s reputation and result in real, negative effects on your bottom line.

One thing you can do to prevent this problem is to have a properly scaled calibration and maintenance program for your organization.

First, a short discussion of terms:

Balance Calibration — Figure 1– Periodic calibration of an electronic balance performed using traceable standard weights helps to ensure that the balance remains within acceptable operating ranges during use and helps identify problems.

Calibration, in the context of this article, refers to the comparison of the unit under test (your equipment) to a standard value that is known to be accurate. Equipment readings often drift over time due to various reasons and may also be affected by damage to the equipment. Periodic calibration allows the user to determine if the unit under test (UUT) is sufficiently accurate to continue using it. In some cases, the UUT may require adjustment or may not be adjustable and should no longer be used.

Maintenance, in the context of this article, refers to work performed to maximize the performance of equipment and support a long life span for the equipment. This may include lubrication, adjustments, replacement of worn parts, etc. This is intended to extend the usable life of the equipment and the consistency of the quality of the work performed by the equipment.

There are several elements to putting together such a program that can help you to direct your resources where they will have the greatest benefit. The following are some key ingredients for a solid program:

Keep it Simple: The key is to scale it to your operation. Focus on the most important items if resources are strained. A simple program that is followed and that you can defend is much better than a program where you can never catch up.

Written Program: Your calibration and maintenance programs should be written and they should be approved by quality assurance (QA). Any program should include the following:

Equipment Assessment and Identification: Assess each piece of equipment or instrument to determine if it is important enough to be calibrated and/or requires maintenance. You will probably find much of your instrumentation is not used for a critical purpose and can be designated as non-calibrated. Each item should have an ID assigned to allow tracking of the maintenance and/or calibration status.
Scheduling System: There needs to be some way to schedule when equipment is due for calibration or maintenance. This way it is easy to stay on top of it. A good scheduling system will pay for itself over time and be easy to use and maintain. A web-based system is a good choice for small to mid-sized companies.
Calibration Tolerance Assignment: If you decide to calibrate an instrument, consider what kind of accuracy you actually need from the equipment/instrument. This is a separate discussion on its own, but common rule of thumb is that the instrument should be at least 4 times more accurate than your specification. For very important instruments, it may require spending the money to get a better device.
Calibration and Maintenance Interval Assignments: Consider what interval you are going to perform maintenance for each equipment item. Manufacturer recommendations are based on certain conditions. If you use the equipment more or less often than “normal” use, consider adjusting the interval between calibrations or maintenance.
OOT Management: If you do get an Out of Tolerance (OOT) result during a calibration and you find that the instrument isn’t as accurate as you need. Congratulations! You just kept it from getting worse. Review the history and see if this may have had an effect since the last passing calibration, adjust or replace the instrument, take any other necessary corrective actions, and keep it up.
Figure 2- Maintenance engineers help keep your systems running smoothly and within specification for a long, trouble-free life.
Training: Make sure personnel that use the equipment are trained on its use and not to use equipment that is not calibrated for critical measurements. Also, anyone performing calibration and/or maintenance should be qualified to do so. It is best to put a program in place as soon as you start acquiring significant equipment so that you can keep things running smoothly, avoid costly repairs and quality control problems. Don’t fall into the trap of assuming equipment will keep running just because it has run flawlessly for months or years. There are many bad results that can come of mismanaged calibration and/or maintenance including the following:
Unscheduled Downtime/Damage/Repairs: A critical piece of equipment goes down. Production stops, and you are forced to schedule repairs as soon as possible. You pay premium prices for parts and labor, because it is an urgent need. Some parts may have long lead times, or not be available. You may suffer reputational costs with customers waiting for delivery. Some calibration issues could potentially affect operator safety as well.
Out of Specification Product: Quality control may indicate that product is not maintaining its historically high quality. If you have no calibration and maintenance program in place, tracking down the problem is even more difficult because you don’t have confidence in the readings that may be indicating that there is a problem.
Root Cause Analysis: Suppose you find product that is out of specification and you are trying to determine the cause. If there is no calibration and maintenance program in place, it is far more difficult to pinpoint changes that may have affected your production system. This can cause a very significant impact on your ability to correct the problem and regain your historical quality standards of production.

A solid calibration and maintenance program can go a long way to keeping your production lines and quality testing “boring”, without any surprises or suspense, and can allow you to put more sophisticated quality control systems in place. Alternatively, an inappropriate system can bog you down with paperwork, delays, unpredictable performance, and a host of other problems. Take care of your equipment and relax, knowing your customers will be happy with the consistent quality that they have become accustomed to.

March 21, 2018

The Necessity of Food Safety Programs in Cannabis Food Processing

By Gabe Miller

No Comments

When processing cannabis, in any form, it is critical to remember that it is a product intended for human consumption. As such, strict attention must also be paid to food safety as well. With more and more states legalizing either medical or recreational cannabis, the potential for improper processing of the cannabis triggering an illness or death to the consumer is increasing.

The FDA Food Safety Modernization Act (FSMA) is the new food safety law that has resulted in seven new regulations, many which directly or indirectly impact the production and processing of cannabis. Under FSMA regulations, food processors must identify either known or reasonably foreseeable biological, chemical or physical hazards, assess the risks of each hazard, and implement controls to minimize or prevent them. The FSMA Preventive Controls for Human Foods (PCHF) regulation contains updated food “Good Manufacturing Practices (cGMPs) that are in many cases made a requirement in a state’s medical or recreational cannabis laws. These cGMPs can be found in 21 CFR 117 Subpart B.

It is imperative that cannabis manufacturers have a number of controls in place including management of suppliers providing the raw material.Food safety risks in cannabis processing could originate from bacteria, cleaning or agricultural chemicals, food allergens or small pieces of wood, glass or metal. The hazards that must be addressed could be natural, unintentionally introduced, or even intentionally introduced for economic benefit, and all must be controlled.

It is unlikely that high heat, used in other food products to remove bad bacteria would be used in the processing of cannabis as many of its desirable compounds are volatile and would dissipate under heating conditions. Therefore, any heat treatment needs to be carefully evaluated for effectiveness in killing bacterial pathogens while not damaging the valuable constituents of cannabis. Even when products are heated above temperatures that eliminate pathogens, if the raw materials are stored in a manner that permits mold growth, mycotoxins produced by molds that have been linked to cancer could be present, even after cooking the product. Storage of raw materials might require humidity controls to minimize the risk of mold. Also, pesticides and herbicides applied during the growth and harvesting of cannabis would be very difficult to remove during processing.

It is imperative that cannabis manufacturers have a number of controls in place including management of suppliers providing the raw material. Other controls that must be implemented include proper cannabis storage, handling and processing as well as food allergen control, and equipment/facility cleaning and sanitation practices. Processing facilities must adhere to Good Manufacturing Practices (GMP’s) for food processing, including controls such as employee hand washing and clothing (captive wear, hair nets, beard nets, removal of jewelry, and foot wear) that might contribute to contamination. A Pest Control plan must be implemented to prevent fecal and pathogen contamination from vermin such as rodents, insects, or birds.

Processing facilities must be designed for proper floor drainage to prevent standing water. Processing air should be properly filtered with airflow into the cannabis processing facility resulting in a slightly higher pressure than the surrounding air pressure, from the clean process area outwards. Toilet facilities with hand washing are essential, physically separated from the process areas. Food consumption areas must also be physically separate from processing and bathroom areas and have an available, dedicated hand sink nearby. Employee training and company procedures must be effective in keeping food out of the processing area. Labels and packaging must be stored in an orderly manner and controlled to prevent possible mix-up.Cleaning of the processing equipment is critical to minimize the risk of cross contamination and microbial growth.

Written food safety operational procedures including prerequisite programs, standard operating procedures (SOP’s), etc. must be implemented and monitored to ensure that the preventive controls are performed consistently. This could be manual written logs, electronic computerized data capture, etc., to ensure processes meet or exceed FSMA requirements.

A written corrective action program must be in place to ensure timely response to food safety problems related to cannabis processing problems when they occur and must include a preventive plan to reduce the chance of recurrence. The corrective actions must be documented by written records.

Supply chain controls must be in place. In addition, a full product recall plan is required, in the event that a hazard is identified in the marketplace to provide for timely recall of the contaminated product.

Cleaning of the processing equipment is critical to minimize the risk of cross contamination and microbial growth. The processing equipment must be designed for ease of cleaning with the minimum of disassembly and should conform to food industry standards, such as the 3-A Sanitary Standards, American Meat Institute’s Equipment Standards, the USDA Equipment Requirements, or the Baking Industry Sanitation Standards Committee (BISSC) Sanitation Standards ANSI/ASB/Z50.2-2008.

Serious food borne contaminations have occurred in the food industry, and cannabis processing is just as susceptible to foodborne contamination. These contaminations are not only a risk to consumer health, but they also burden the food processors with significant costs and potential financial liability.

Anyone processing cannabis in any form must be aware of the state regulatory requirements associated with their products and implement food safety programs to ensure a safe, desirable product for their customers.

March 14, 2018

Soapbox

Paradox or Paragon? A Non-Techie Look at Blockchain, Cryptocurrency & Cannabis: Part II

By Marguerite Arnold

No Comments

Disclaimer: Marguerite Arnold has just raised the first funds for her blockchain-based company, MedPayRx in Germany (and via traditional investment funding, not an ICO). She will also be speaking about the impact of blockchain on the cannabis industry in Berlin in April at the International Cannabis Business Conference.

To read the first part of this series, click here. The Paragon class action lawsuit is likely to shake up two industries – the cannabis world, which has been following this situation at least in the industry press since the company began to raise money – and the ICO space in general. Why? Just the combination of the two topics is a guaranteed conversation starter. In addition, given the focus on whether tokens are securities or not (or whether so-called “utility tokens” are as well, depending on how they are used and sold) far beyond cannabis, this case may well begin to set precedent on the entire subject. Even more worrying for Paragon in particular right now, beyond the federal government, coordinated efforts are underway by both law firms and consumer groups to recruit aggrieved investors as suit plaintiffs. Beyond the United States and far from the Paragon case specifically, banks in Europe have begun to set guidelines on cryptocurrency and ICOs too. It is not routinely hostile everywhere (see Switzerland if not many Asian countries). But the map is now being defined.

The dilemma that Paragon is now facing is also something that has been coming for some time both for the company and others like them – and from both the cannabis investment and crypto coin directions. Digitally astute cannapreneurs take note: Do you really want your dream business used to define precedent as a defendant in a class action? Or targeted by the new SEC cyber unit whose job is to regulate ICOs (and probably “crowd sales” too?). That regulatory glare is coming everywhere. And soon. Globally.In the world of cannabis, in particular, it is also very important to be careful.

If issuing tokens, particularly if you sell them to raise money – no matter what that money will be used for – realize what you are doing. Even if you state to the world that these are not “investment” vehicles” but “utility” tokens. If you sell them, they are by definition, even if not federally litigated and defined yet in the United States, a contract for future worth, services or other benefit. An IOU in other words. As such they are also derivative securities, which is why the regulatory agencies, barely 10 years out of the last global financial meltdown, are now starting to see parallels. So much so, in fact, that SEC Chair Jay Clayton warned in January that any attorneys who are involved in ICOs might be in breach of professional obligations. Other jurisdictions are following suit.

In the world of cannabis, in particular, it is also very important to be careful. Selling (soon to be federally if not internationally regulated) tokens or securities in general for that matter for certain services or products that can be illegal in some jurisdictions is also a space that cannapreneurs are going to find challenging. See the banking problems of the entire U.S. cannabis industry. Same issue.

This is also going to get even more complicated very soon. Particularly in a world of shifting regs and when it comes to “brand creation.” Right now, for example, a crowdfund or ICO (the terms can be used interchangeably, token issue or not) for a “global cannabis lifestyle brand” promoted and sold online is highly problematic just about everywhere. Why? You cannot transport cannabis across state lines in the U.S. Americans and Israelis also still cannot export anywhere. You also cannot sell what is considered “medical” marijuana to a European regulator if it is not GMP certified. It is, according to local definition, most certainly not “medical”. You may also not distribute cannabis online in countries like Germany. And of course, cannabis itself is still federally illegal in many places, including the United States. Issuing a token or security with the intent of engaging in such practices is ill advised at this juncture. No matter what it is labelled.

Those are also situations where investors could legitimately also sue the ICO or crowd sale holder for breach of securities laws or outright fraud.

Beyond the world of banking law, users face other quagmires, depending on your situation and how you use and issue tokens. Or you certainly will in the emerging future. If you use tokens in situations where members “vote” you may also run into other problems. Like civil liberties issues. Poll taxes (where you force people to pay before access to voting or weigh the impact of their votes on financial contributions) is illegal in many jurisdictions and even more specifically certain use cases that may not always be initially obvious. How that plays out in blockchained ecosystems is a discussion of the future, but it is coming. Along with other labour and regulatory issues surrounding the use of “smart contracts.” Which are also known as “utility tokens.” See, it gets confusing. And fast.

In the cannabis space, liabilities sprout more quickly than even the fastest growing strain.As a result, the first major issue that any cannabis business considering a token generation event (or TGE) will face, no matter whether it is state or federally legit in said jurisdiction, has nothing to do with cannabis but rather rather cryptocurrencies and ICOs – and for right now federal if not international financial law – but look for that to also change as the space develops.

For the present, in most places, token issues where monetary value is assigned or implied are considered securities or even defined outright as currency. Or they will be soon. This means that if you are issuing a new coin for any purpose that you intend to sell for any purpose, including an ICO, especially one that will supposedly be used to pay for goods or services, or even to “assetize” the token to give it a market value (the value of the asset it is assigned), you are now in the federal end of the swimming pool. And federal if not international law is not for novices or sissies much less non-lawyers when it comes to crypto coin. There are great white sharks everywhere in this often-strange digital ocean. That is even before you get to cannabis.

In the cannabis space, liabilities sprout more quickly than even the fastest growing strain.

This is also easy to illustrate – even beyond the concept of an ICO. Say you are a cannabis producer in Colorado – where much of the legal cannabis industry we know today was born. You are in business, have a license and even own your grow space and the acres of real estate that it sits on. But you also want to access additional capital (including that of the international kind) and are, as an aside, overwhelmed by the demands of your cash business. You meet an energetic young blockchain geek who says she can sign you up to her service that will create your white paper, website and even hook you up to one of the several “insta-mint” crypto coin services now available for several thousand dollars (don’t forget lawyer’s fees), plus hiring a good PR firm to manage the ICO process.

Groovy.

You issue your own coins and literally mint them for the sole purpose of assigning each coin to every dried gram of your product that you produce to test the market before potentially holding an ICO. You then “sell” this bud (at wholesale prices) to a dispensary with a wallet that will accept your coin via a smart contract that only releases the funds when the right amount and quality of product is delivered to the dispensary. As a clever marketing technique, you also agree with the recreational dispensary you are working with (who happens to be in Aspen) that you both will also now offer jointly issued coins, at a higher retail price, to any tourist with a medical card or any age-appropriate recreational user who has the ID to prove it, to “pre-buy” their cannabis on the way to après ski and have it delivered, no questions asked, at the hot tub. You advertise the service with a cannabis-friendly ski package operator and travel agent, and voila – customer base is assured. If you have any celebrity friends who are willing to promote it, even better. And why not, while you are at it, do some LinkedIn outreach.

No cash needed either. ID verification happens with coin purchase.

Easy, right? So many headaches solved with one coin to rule them all. Banking issues evaporate along with a lot of work for accountants at both ends of the conversation. And the price of the coin you issue cannot be illegally pumped and dumped because the “price” is set by the state or federal market and/or supply and demand and/or another kind of asset (like a piece of real estate designed to be a startup incubator space for which people also pay entrance fees in your tokens, to enter and use). Then you can offer these “coins” for sale, at those market prices, set by the dried bud you are growing, to anyone, anywhere, to invest in too. Right?

No ICO, even. No problem. After all, you say they aren’t securities but “utility tokens.”

Wrong.

By definition, such activity is illegal in the United States if it has anything to do with the plant for the same reasons the U.S. industry remains a mostly cash-only business. There are several U.S. start-ups trying to construct “legal” payment gateways for the industry right now in the lower 48 plus 2 (see CanPay in Hawaii) and some creative efforts in Europe. However, all of those depend on the willingness of a banking institution on the other end to allow that to happen. See Uruguay if you still remain optimistic about any American efforts right now. Not to mention the newly awoken willingness of the federal DOJ to prosecute for money laundering in a post-Cole-memo world. And that includes you too, California.

But this is an issue that is not just limited to the United States.

In other places, like Canada, Australia, Israel and the Eurozone, legitimate cannabis businesses have bank accounts. And banks are absolutely involved in both the blockchain and crypto space – see Ripple. As a simplified payment gateway, the technology is imminently useful, if still forming. But banking authorities are so concerned about ICOs that they are moving, quietly, to implement policies against them even as they are still accepting cyber currency (in limited ways and via strictly controlled channels).

Given such concerns and divided loyalties, it is unlikely that authorities in Canada will sit this one out, even though (and perhaps because), to date, the most intriguing ideas about cryptocurrency and cannabis have tended to waft from this part of the world lately given what is about to happen this summer.

Most dangerous of all to the budding crypto cannapreneur is Germany – home of legal, public health insurance covering medical cannabis. Banking regulators in Frankfurt, in particular, have taken a dim view of even just regular old crowdfunding. Add a token into the mix and the Germans are even less amused. The persistent rumor in the Fintech community in Frankfurt this March is that German banking authorities are refusing to accept any funds raised during an ICO anywhere. Verboten for any purpose. Why? Even if they know who you are, and all of your investors meet their KYC requirements, they do not know the source of the cyber currency coming from those investors. No dice. And KYC in this instance does not refer to a new brand of cannabis-flavored lubricant. It is a term that means, in the most comprehensive understanding of how it must be used, not only “know your customer” but being able to verify all points of data on a chain. Including the coin issuer, purchase conditions, currency used to purchase the same and “chain of title” downstream. If you are confused by this already, you should not be engaged in an ICO right now.Not all of these models or even the ICOs that use them are scams.

Add cannabis to this recipe, and every bank in Germany, even the one at the moment who is still more or less openly participating in ICOs, if not the rest of the European financial community, will probably walk. Even if you reach your “hard cap” (the maximum amount you hope to raise) that might be in the tens if not hundreds of millions of euros. In that case, it will probably be even harder to find a bank to accept your business. Worse, you may never raise the amount you hope for. At that point, you cannot go back to traditional venture capitalists – or anyone else – for more money. You are done. You must start over from scratch. If there was an asset of any kind involved (including a license to do business) legally, everyone who holds a coin owns a piece of it. See securities law. This is precisely why you can never raise money again against that asset or with the corporate entity that owns it. Or at least not without a lot of legal fees or begging your peeved investors for more money. Legally, at that point, they could require you to sell all assets associated with the corporate entity holding the ICO. And they probably would. For investors that is the best-case scenario. ICOs for concepts with no assets or strategic partnerships in place at the time of the “token sale,” create many lose-all scenarios for investors.

There are many pitfalls to this world – and not just from the cannabis side.Issuing a “token” that someone has to pay for that acts like cash (even if to buy goods and services in the future from other members of the ecosystem and social community that crypto coins create) that also is vulnerable to market pricing, is another quagmire. In fact, it might be, beyond any techno or financial queasiness about blockchain, the biggest reason that this industry should look, and with considerable caution, at all tokenized and ICO models that also premise their worth on the idea that such coins will inevitably increase in worth over time. There is also anti-cartel, monopoly and market discrimination to consider.

Not all of these models or even the ICOs that use them are scams. There are and will be valuable alt currencies and tokens in the future (even without a cash value assigned). All of the top start-ups in the current ICO space, in fact, are finding unique ways to create a real alternative currency with values attached that are indisputable. And not all of them will succeed.

However, that is not true of the cannabis business at this juncture. The plant, much like cryptocurrency and beyond that, blockchain itself, has not reached mainstream status yet – starting with market economics and regulation that is already international. A pot-based coin, no matter where it is issued and by whom (including a federal government), would run into multiple issues with valuation just because the price of cannabis itself right now is so volatile, not to mention unevenly priced thanks to jurisdictional restrictions and barriers. For that reason, there is no way to issue a “cannabis coin” with global relevance, much less global value.

And that, of course, is beyond the issue of subsequently selling those coins on exchanges that have been repeatedly hacked, fail to give customers access to their accounts, or are, in the case of China, banned outright (which also deemed ICOs illegal last September).

There are many pitfalls to this world – and not just from the cannabis side. Part III of this series will look at some of the biggest opportunities when cannabis integrates with the DLT (distributed ledger technology).

March 14, 2018

The Global Price of Cannabis

By Marguerite Arnold

3 Comments

Cannabis pricing, globally, is a topic that is going to remain heated if not highly fluid for some time to come. Why? Government regulation (or lack thereof), compliance and even transport along with different models for commerce and consumption are creating an odd and absolutely uneven map of commodity pricing. We live in a world where accurate information is hard to come by. Even from ostensibly “official” sources that track operational markets. Black or legit.

It may sound complex today but it used to be a lot harder. As of just 2014, the UN’s Office of Drug Control listed the price of a gram of (black market) cannabis in Lichtenstein at $1,020 (as reported by a bemused Business Insider). While this could have been a simple matter of misunderstanding that Europeans frequently use commas rather than periods as decimal points in numbers, the fact that this was later corrected to $10.13 suggests human error in transcription rather than reporting. And the world has certainly changed since then.

Yet with no international legal marketplace or even platform yet in existence to track the global price of legal cannabis in different jurisdictions, this is the kind of issue that faces not only those in the industry but those trying to analyze it.

That said, there are beginning to be data points for those who are interested and those who must have this information for professional reasons. Here is a break-down of regional (legal) prices, per gram from a selection of sources generally considered fairly accurate. This is also made a bit more difficult by the difference in measurement systems and currency fluctuations. For ease of reference, these figures are in grams and U.S. dollars. An ounce is about 28 grams.

Medical grade cannabis also means different things in different markets. Outside the U.S., in Canada and the EU in particular, medical grade cannabis must meet a certification process that adds to the cost of production considerably. Certainly in comparison with outdoor grows. It is still, for the most part, imported, from either Canada or Holland, although look for that to start changing this year as domestic cultivation in multiple countries finally gets seriously underway.

The U.S.

Pricing really depends on where you are. It is also dropping fairly dramatically in established markets. The most recent example of this is Oregon – which has seen its higher-than-normal state retail market begin to normalize with California, Washington and Colorado. This is the price of establishing regulatory schemes on a non-federal level. That said, the competition is so extreme at the moment that Oregon, in particular, is a buyer’s market, with recently reported prices as low as $1 and change for a gram.

Retail pricing, in particular, will remain all over the place on a national level, especially given the amount of local competition between dispensaries underway. On average, however, medical grade-ish cannabis runs between $6-30 a gram, retail.

According to the website Cannabis Benchmarks, which tracks U.S. wholesale prices, the domestic spot index of wholesale cannabis was at $1,292 per pound at the end of January. Or about $5 per gram.The theory that the legit market has to price the black market out of existence is unpopular with those who want to collect more taxes from rec sales.

Nationally, at the moment, uncertainty over how the new post-Cole Memo world will play out, plus oversupply in certain markets, is creating strange pricing. Note to consumers, particularly in recreational markets: There are deals to be had.

Canada

This market is interesting for several reasons. The first is that several of the regional governments are considering establishing a Canadian $10 per gram price for the recreational market. Medical grade runs about $8 at the moment in local currency. That means, with a 20% differential in current f/x rates, a recreational gram will be set at USD $8 and a medical gram at about $6. That said, the theory that the legit market has to price the black market out of existence is unpopular with those who want to collect more taxes from rec sales.

Theories abound about the future of recreational pricing, but for the moment, a great deal of supply and new producers will keep prices low at least through 2019. After that? It is impossible to even guess. At that point, Canadian producers will still be supplying at least German medical patients with some of their imported bud. Regardless, the country will continue to play an important role in global pricing – even if it is to set a recreational and medical standard that plays out in markets already from the EU to Australia.

Israel

Like Canada’s market, although for different reasons, the Israeli official price on legal cannabis is absolutely constant. It is set by government policy. Those who have the drug legally, in other words with a doctor’s prescription, pay about $100 for a month’s supply. That amount on average is about 28 grams. That means that a medical gram in Israel will set you back about $3.50 per. U.S. not Canadian.

Europe

Price deltas here are the most impacted by changing national laws, standards and medical legalization. There are only two semi-legitimate recreational markets at the moment that include THC. Those are Holland and Spain. In Holland, via the coffee shops, the low-end of passable bud starts at between $12-15 per gram and goes up to about $30 for the really exotic breeds. This being Holland, they exist and are obtainable. In Spain, add the cost of joining a social club (about $50), but in general, the cost of a gram is about $10.Price deltas here are the most impacted by changing national laws, standards and medical legalization.

Medical markets in places like Germany are still skewed by integration of the drug into the country’s healthcare system and the fact that it is still all imported. The horror stories are real here. Patients must pay out-of-pocket right now for cannabis flower that is also being pre-ground by local apothekes for an additional price per gram that is eye-wincingly high. However, once the price and supply normalize, look for a medical standard here of about $10 for a month’s supply. That will be about 28 grams too.

Germany, in other words, will eventually be one of the cheapest markets for patients after reimbursement by insurance. That shapes up to be about $0.50 per gram at point of sale. It could be far less for those who are able to obtain authorization for higher amounts up to five ounces per month. The flat fee stays the same. Do the math. That works out to some pretty cheap (high grade) medical relief.

Black market cannabis and hash, which is also far more common in Europe than the U.S. at least, is fairly widely available for between $12 and $20 a gram.

The rise of cannabis production in Eastern Europe and the Baltics (which is also still largely pending and based on ongoing government talks and emerging distribution and cultivation agreements) will also dramatically drive down the cost of legal cannabis in the EU within the next several years. Production in this part of the world, along with Greece, may well also source rec markets all over the continent once that happens.

Africa & Central and South America

While the African cannabis trade has yet to break out – even in the media much of yet, there is definitely something green growing in several African countries including South Africa and Ethiopia. That trade unlike most of what is going on in South America with the possible exception of Uruguay is already looking for export opportunities globally. With African cannabis going for less than a buck a gram in most places (as in about a fifth of even that), look for certified African medical cannabis in select Western markets where price is going to be a major issue. Think medical standards. On the South American front, prices are equally low. However, remember that these are not regulated markets yet. And domestic government standards, starting with GMP and both indoor and outdoor grow requirements are basically non-existent. Growers who want to export to higher regulated markets are planning accordingly.

Assorted Outliers

It goes without saying that in places where cannabis is both illegal and carries the death penalty or other harsh penal retaliation, that the price is not only much higher, but the source is black market. In the UAE for example, a gram will set you back well over $100.

March 7, 2018

Supplier Quality Audits: A Critical Factor in Ensuring GMP Compliance

By Amy Scanlin

1 Comment

Editor’s Note: This is an article submission from the EAS Consulting Group, LLC team.

To Audit, or not to audit? Not even a question! Audits play a crucial role in verifying and validating business practices, ensuring suppliers are meeting their requirements for Good Manufacturing Practices (GMPs), and most importantly, protecting your interests by ensuring that you consistently receive a compliant and quality product. Audits can help ensure sound business procedures and quality systems, including well-established SOPs, verification and documentation of batch records, appropriate sanitation practices and safe storage and use of ingredients. Audits can also identify deficiencies, putting into motion a corrective action plan to mitigate any further challenges. While a detailed audit scheme is commonplace for established industries such as food, pharmaceuticals and dietary supplements, it is equally important for the cannabis industry to ensure the same quality and safety measures are applied to this budding industry.

If the question then is not whether to audit, perhaps the question is how and when to audit, particularly in the case of a company’s suppliers.This is an opportunity to strengthen the working relationship with each side demonstrating a commitment to the end product.

Supplier audits ensure first and foremost that the company with which you have chosen to work is operating in a manner that meets or exceeds your quality expectations – and you should have expectations because ultimately your product is your responsibility. Any issues that arise, even if they are technically the fault of a supplier, become your issue, meaning any enforcement action taken by your state regulators will directly impact your business. Yes, your supplier may provide you with a batch Certificate of Analysis but you should certify their results as well.

Audits are a snapshot of a moment in time and therefore should be conducted on a regular basis, perhaps biennially or even annually, if they are a critical supplier. In some cases, companies choose to bring in third-party auditors to provide an objective assessment of suppliers. This is especially helpful when the manufacturer or customer does not have the manufacturing, compliance and analytical background to accurately interpret data gathered as part of the audit. With the responsibility for ensuring ingredient identity and product integrity falling on the manufacturer, gaining an unbiased and accurate assessment is imperative to reducing the risk to your business.

Conducting a supplier audit should be well planned in advance to ensure both sides are ready. The audit team must be prepared and able to perform their duties via a combination of education, training and experience. A lead auditor will oversee the team and ultimately will also oversee the results, verifying all nonconformities have been properly identified. They will also work with the supplier to conduct a root cause analysis for those nonconformities and develop a corrective action plan to eliminate them from occurring in the future. The audit lead will also verify follow-up results.

Auditors should discuss with the supplier in advance what areas will be observed, what documentation will need to be ready for review and they should conduct their assessments with professionalism. After all, this is an opportunity to strengthen the working relationship with each side demonstrating a commitment to the end product.This is your chance to ensure your suppliers are performing and will meet your business, quality and product expectations.

Auditors must document that ingredient identity and finished product specifications are verified by test methods appropriate for the intended purpose (such as a whole compound versus a powder). State regulations vary so be certain to understand the number and types of required tests. Once the audit is complete and results are analyzed, you, the manufacturer, have an opportunity to determine if the results are acceptable. Remember, it is your product, so ultimately it is your responsibility to review the available data and release the product to market, you cannot put that responsibility on your supplier.

Quality Agreements as Part of a Business Agreement

There are opportunities to strengthen a partnership at every turn, and one way to set a relationship on the right path is to include a quality agreement as part of a business agreement. A quality agreement lays out your expectations for your suppliers, what you are responsible for and is a living document that, once signed, demonstrates their commitment to upholding the standards you expect. Just as with a business agreement, have any quality agreements reviewed by an outside expert to ensure the wording is sound and that your interests are protected. This is just another step in the development of a well-executed business plan and one that solidifies expectations and provides consequences when those expectations are not met.

Supplier audits must be taken seriously as they are opportunities to protect your brand, your business and your consumers. Enter into an audit as you would with any business endeavor – prepared. This is your chance to ensure your suppliers are performing and will meet your business, quality and product expectations.

March 7, 2018

Soapbox

Paradox or Paragon? A Non-Techie Look at Blockchain, Cryptocurrency & Cannabis: Part I

By Marguerite Arnold

2 Comments

You have probably heard of cryptocurrencies, tokens and smart contracts. You might have also heard, even if you did not understand the significance, that IBM recently suggested that the Canadian government use their form of blockchain, called Hyperledger, to track the recreational cannabusiness. Or that a large LP called Aurora is also looking at this space (as are other licensed producers large and small). Or maybe you have seen an item in the mainstream news about an ICO for a cannabis company that is now also going terribly wrong.

What on earth is going on?

These are all related issues, even if highly confusing and disjointed. Blockchain technology and cryptocurrency are hot right now and getting hotter – both in the mainstream world and in the cannabis industry globally. But for all its fans, the drumbeat for caution is also growing louder the more mainstream this technology (and the legitimate cannabis industry) becomes.

The many problems the entire cannabis vertical has with banking has make this current development almost inevitableOn the technology and finance side, that is why so many big names right now are urging caution. Nouriel Roubini, professor at NYU’s Stern School of Business, is just the latest to do so – and for reasons that everything to do with history. Including recent history ten years ago, when the world stood on the brink of a financial disaster thanks to unchained derivatives. The biggest worry in fact, right now, is about the financial implications of widespread adoption of the technology, beyond the tech itself and how it may (and may not) be legitimately used. Which itself is a huge question.

So why all the fuss?

This is revolutionary technology which is also being introduced into the market at a time when decentralized processing for automation is on the horizon. But also because blockchain can be used to create tokens or digital coins that act like financial instruments. And once created, such tokens can be issued much like money or even stock, to raise additional funds – for both start-ups and ongoing enterprises. The best thing though? This technology was invented to create a decentralized form of value exchange and trust-less, anonymized auditing and verification. No traditional financial institutions or even governments needed, wanted or should apply (at least in theory).

The many problems the entire cannabis vertical has with banking has make this current development almost inevitable. Not to mention accessing investment cash (although this is certainly changing outside the United States). Compliance issues in every direction are another wrinkle this tech will help solve. Starting with tracking product but also rapidly expanding to uses including protecting users’ privacy and facilitating access to high-quality, inspected product for qualified users and buyers. Not to mention other areas that are literally space-age but coming fast. Look for cool stuff coming soon involving both AI (artificial intelligence) and IoT (internet of things).

It is a fascinating, complex space. However, one aspect of this world, in particular, Initial Coin Offerings – or ICOs are getting attention right now. Why? They can be an incredibly efficient way to raise money for companies – both ones currently in business and start-ups with little more than a whitepaper or business plan and perhaps a working prototype. More and more of the successful ICOs are, however, for an existing company or are even attached to an asset, including a license, a prototype or a fund of money (or other combinations). They also rely on blockchain and alternative currency or tokens (sometimes also referred to as smart contracts) to work.

From a technology perspective, you can “mint” new coins relatively easily these days, sourced from a variety of different kinds of blockchain. Or even combinations thereof. You also can issue tokens or altcoins without an ICO.

In a world where there is vastly expanding cannabis opportunity, and many of these hopeful entrepreneurs are both digitally astute but without access to traditional capital, what could be better?

bitcoin — Bitcoin quickly became one of the more popular cryptocurrencies

From a financial and investor perspective, ICOs are a hybrid form of an IPO meets social media. “Coins,” “tokens” and “smart contracts” –or cyber currency collectively– are digital forms of cash, contracts, membership cards, discounts or even authorizations for identity. There are many ways tokens can be used, in other words. This by way of saying there are also important differences too. Not all tokens are the same. Not all are used as “money.” Some are but have assets assigned to them (like real estate). Others, particularly smart contract tokens, are strictly functional (pay funds when product is delivered and verified). The one caveat here is that the exchange of any token or altcoin will also cost money. Why? It is the electricity cost of computer processing the request for transfer. Plus access and service fees. There is no such thing as a “free” token. How tokens are priced, sold, bought, maintain value and for what purposes, is a debate if not process function that will not be solved anytime soon. Starting with the fact that some blockchains are more energy efficient (and sourced from green energy) than others.

To add to all of this confusion, not all ICOs function the same way. Some do give investors ownership in the company or specific portfolios that even include real-world assets. Others offer to use pooled funds to buy assets (like real estate or an expensive license). Many rely on the “coin” issued as a kind of discount scheme, reward mechanism and in many cases, direct discounted payment for future goods and services, of both the digital and real world kind. Many offer banking services directly, including in the very near future, the ability to exchange cyber cash for the fiat variety at even remote ATMs. Sound futuristic? It is coming and soon.

Most ICOs in the market now, however, rely on the following supposition: Issue a token with a unique name. Put up an ICO website. Encourage investors from anyplace on the planet with an internet connection, to use either crypto or fiat currency to buy tokens in the issuing startup as an investment that will give the new company funds to operate and build out services or the application (whatever that is). Also, plan to use the tokens for an exchange of some kind in the future (either for other coins or a good or service). Watch the value of the coin increase (for whatever reason) while informing investors (or contributors) that this is not really a security but a “utility” token that is expected but not guaranteed to become more valuable. Retire early with the prospect of having brokers of expensive real estate in places like London and Dubai come calling.The public tide of opinion, even if regulations are slow to move, is on the side of reform if not outright advocacy.

That will not be the case for the vast majority of ICOs, however, no matter what returns, goods or services they offer. Even if they also have vibrant communities already using their services (whatever those are). It will not be the case for most of the cryptocurrencies upon which such ICOs are based (most at the moment are based on Ethereum, NEO, Hyperledger or combinations of the three). There will be more of those too. And not every blockchain will make it (cryptocurrencies and tokens are based on an origin protocol or blockchain much like computer operating systems are either PC or Mac or mobile phones are Android or Apple). Some speak to one another well. Most do not “exchange” easily – even between themselves – let alone back into good old cash. And while nobody wants to be the Betamax of blockchain, there will, inevitably, be quite a few of them. When that happens, any economic value of the coins and even contractual relationships created with them disappear as well. Add in extreme price volatility in the current market pricing of these tokens, and you begin to get a sense of the risk profile involved in all of this.

The real hurdle, not to mention expense, comes when transferring back from the world of crypto to the one of fiat (regular money). Being a Bitcoin billionaire (there are about 1,000 individuals who own about 40% of the entire global Bitcoin issuance) is no fun if you have no place to spend it.

A Rapidly Changing Marketplace

In the past 18 months, cryptocurrency and ICOs have gotten increasing attention because of the increasing value of all kinds of cyber currency (far beyond Bitcoin). The total market cap for all forms of cryptocurrency itself zoomed past $700 billion at the turn of the year. That is impossible to ignore. You might have heard of some of these currencies too. There is ETH, Litecoin, Bitcoin Cash, Dash, even Dogecoin (created originally as a joke on an internet dog meme). Right now, in fact, at some of the most expansive exchanges, there are literally hundreds of these coins which are constantly bought and sold if not exchanged and used.

paragon advertisement — This has red flags written all over it.

And then there are the sums ICOs are bringing in some cases, flagrantly flaunting regulatory agencies and doing end runs on the global banking system that cannot keep up with them. The top ICO of 2017, a company called Block.one and registered in the Cayman Islands, so far holds the record at $700 million and counting. Filecoin, the second largest ICO last year, raised $262 million in one month from August to September. And then, of course, there is the cannabis industry-specific case of Paragon – now headed for class-action lawsuit litigation over their $70 million pre-and ICO sale intentions.

It would be logical to assume, given the eye-watering sums potentially involved not to mention the large role a smart digital media footprint has to do with an ICO’s success, beyond its service or technology offerings, that this would be a perfect place for cannapreneurs to turn for funding. The global market is opening for cannabis reform at the same time the crypto craze meets Fintech Upheaval is occurring – in fact, these two things are happening almost simultaneously.

Thanks to regulatory realities and an ongoing stigma, there is still no institutional investment in the industry in the United States (that is rapidly changing other places). These are two new industries and dreams are large.

In the legit cannabis space, so are the expenses.

The price of opening a dispensary in most U.S. states tops a million dollars right now. In Europe, the price of entry is even more expensive. A GMP compliant grow facility in Western Europe, plus the money for lawyer’s fees and negotiations for the license itself will set you back anywhere from $20 million and up, depending on the location. Even staying afloat in the industry once the doors are opened is a challenge. And loans, even for outstanding invoices, are still tough to come by in an industry where banking services of the simple business account kind are a challenge. Particularly in the United States.

The public tide of opinion, even if regulations are slow to move, is on the side of reform if not outright advocacy. Why shouldn’t a reform-group-rooted ICO aspire to own or provide ongoing business financing to a community-minded canna farm in California, Canada, Germany, Israel or Australia? Or even Greece?

However, right now, with some noted exceptions, the cannabis business remains at minimum, a dangerous place to consider issuing altcoins that act like financial instruments or raise money with them. Why and how?

Part II of this series will look at the significant liabilities of using cryptocurrency and ICOs in the cannabis industry.

March 1, 2018

Q1 European Cannabis Industry Update Report

By Marguerite Arnold

No Comments

While the American cannabis industry deals with both unparalleled opportunity and new risks, Europe is setting itself up for a spring that is going to be verdant.

The ongoing drumbeat for reform in countries across the continent is bringing both money and high-grade medical product into the market. Even if volume is still really at a trickle, it will rapidly widen to a steady stream. It is also very clear that the next two to three quarters are going to deliver news that the cannabiz has arrived, and with authority.

The following is an overview of what is happening, where, and with an eye to informing foreign investors, in particular, about new opportunities in an awakening market.

Germany

Without a doubt, the country is priming itself for a medical market that is going to be large and partially government supported, driving regulation of medical use across the continent. On top of that, the idea of selling 28 grams (1 oz) of product to end consumers who only pay about $12 for their medication has gotten the attention of global producers. Opportunities here for those who did not submit a bid for federal cultivation (see the big Canadian LPs) are still unfolding.

german flag — Photo: Ian McWilliams, Flickr

However here is what is now on the table: an import market that cannot get enough cheap, GMP certified product. Producers from Australia to Uruguay are now actively hunting for a way in, even if cutting a supply deal for the next 18 – 24 months as the German green machine starts to kick into production-ready status. What a bad time for Israel to be so publicly out of the ex-im biz! In fact, Israeli entrepreneurs are scouring the country for opportunities into the market another way (and there are a few efforts afoot in a sleeping giant of a market waking up from a long snooze to find they cannot get enough product). Right now, however, the legal market is absolutely dominated by Canopy, Aurora, Aphria and Tilray along with Dutch Bedrocan.

The German parliament is clearly also going to do something about another piece of reform which will also drive market expansion – starting with announcement of additional cultivation possibilities (potentially this time even open to German firms). On Friday, the day after the British parliament wrangled over the same thing, the German Bundestag debated decriminalization along with a few other hot button topics (like abortion). With only the AfD (right wing) still in the “lock ‘em up camp,” and even the head of the police calling for reform, it is clear that decriminalization is on the legislative agenda this year.

Spain, Italy, Switzerland, Portugal, Denmark & Holland

While it may seem presumptuous to lump all these very different countries under one label, the reality is that the level of reform is generally in a similar state (transition to medical), and that drives potential political and market risk as well as evaluation of investment decisions.

In Spain, federal reform has not come yet, but medical deals involving pharmaceutical companies (both exclusively cannabinoid focussed and otherwise) are afoot. Plus of course there is Barcelona (the Colorado of the country in many ways).

Italy, Portugal and Denmark are all the battlegrounds for the big Canadian (and German) companies now set on having a country-by-country footprint in opening markets across the EU (see Canopy, Aurora, Aphria and their German counterparts of Spektrum Cannabis, Pedianos and Nuuvera). Licensing is political, happening at a high level, and only for those with the bank to back deals that come with high capex attached. That said, there are lucrative opportunities for those with local contacts and liquidity.

Holland is another animal altogether, but for the most part everyone is so confused about the state of reform domestically that the only people really in position to take advantage of it are the Dutch, at least for now. That said, Dutch-based plays (in part financed by Canadian backing) for other Euro markets are absolutely underway. Who else has so much experience here, let’s be honest? Regardless, investments in these canna markets, particularly for the Euro-focussed but North American investor, for now, will tend to be through public stock acquisitions of Canadian parents or direct investments in Dutch companies (see Bedrocan, but they are not the only game in town).

Switzerland, for the most part, is setting its own pace, but reform here means the CBD market, including for medical grade imports, is a place for the savvy medical investor to look for cultivation and ex-im opportunities. Including in the home-grown, Swiss pharma space.

Greece

The recent pronouncement of government officials that Greece was opening its doors to investment and a medical cannabis business means that there will be a federally legal, EU country that is promoting both investment and tourism opportunities just for domestic consumption, let alone export. Scouts from all the major canna companies are combing both the Greek mainland and its islands.

Poland

If there was ever such a thing as a “virgin” cannabis market, Poland might well qualify. For those distributors with cheap product that has not (yet) found a home, the country is poised to start to announce (at least) distribution deals to pharmacies with producers now establishing themselves in other markets. Medical legislation has just changed, in other words, but nothing else is in place. And with Polish patients now having, literally, to scour the continent for product not to mention foot the bill for the travel costs to get it, the next obvious step is a national pharmacy chain distribution deal or two with producers from all over the world now looking for Euro market entry possibilities. Domestic production is some time off.

The BalticsThe ongoing drumbeat for reform in countries across the continent is bringing both money and high-grade medical product into the market

If there were such a thing as the “Berlin” of the cannabis market in Europe (namely sexy but poor), it is probably going to be here. Cheap production markets and opening opportunities for export across the EU for high quality, low cost cannabis are not going unnoticed. Look for interesting plays and opportunities across the region. Scouts from the big international canna companies already are.

The UK

Britain comes last because of the political uncertainty in general, surrounding the island. However, last week Parliament appeared on the verge of being embarrassed into acting on at least medical reform. There will be a market here and of course, there is already one globally known cannabis company with a 19-year track record and a monopoly license on canna-medical research and production (GW Pharmaceuticals) that calls the British Isles home. This will be a no-brainer, particularly for foreign English-speaking investors still leery of continental Europe. However it will also be highly politically connected. Expect to see a few quick arranged marriages between such landed gentry and foreign capital – potentially even this year.

March 1, 2018

Colorado vs. California: Two Different Approaches to Mold Testing in Cannabis

By Swetha Kaul, PhD

8 Comments

Across the country, there is a patchwork of regulatory requirements that vary from state to state. Regulations focus on limiting microbial impurities (such as mold) present in cannabis in order for consumers to receive a safe product. When cultivators in Colorado and Nevada submit their cannabis product to laboratories for testing, they are striving to meet total yeast and mold count (TYMC) requirements.In a nascent industry, it is prudent for state regulators to reference specific testing methodologies so that an industry standard can be established.

TYMC refers to the number of colony forming units present per gram (CFU/g) of cannabis material tested. CFU is a method of quantifying and reporting the amount of live yeast or mold present in the cannabis material being tested. This number is determined by plating the sample, which involves spreading the sample evenly in a container like a petri dish, followed by an incubation period, which provides the ideal conditions for yeast and mold to grow and multiply. If the yeast and mold cells are efficiently distributed on a plate, it is assumed that each live cell will give rise to a single colony. Each colony produces a visible spot on the plate and this represents a single CFU. Counting the numbers of CFU gives an accurate estimate on the number of viable cells in the sample.

The plate count methodology for TYMC is standardized and widely accepted in a variety of industries including the food, cosmetic and pharmaceutical industries. The FDA has published guidelines that specify limits on total yeast and mold counts ranging from 10 to 100,000 CFU/g. In cannabis testing, a TYMC count of 10,000 is commonly used. TYMC is also approved by the AOAC for testing a variety of products, such as food and cosmetics, for yeast and mold. It is a fairly easy technique to perform requiring minimal training, and the overall cost tends to be relatively low. It can be utilized to differentiate between dead and live cells, since only viable living cells produce colonies.

Petri dish containing the fungus Aspergillus flavus.
Photo courtesy of USDA ARS & Peggy Greb.

There is a 24 to 48-hour incubation period associated with TYMC and this impedes speed of testing. Depending on the microbial levels in a sample, additional dilution of a cannabis sample being tested may be required in order to count the cells accurately. TYMC is not species-specific, allowing this method to cover a broad range of yeast and molds, including those that are not considered harmful. Studies conducted on cannabis products have identified several harmful species of yeast and mold, including Cryptococcus, Mucor, Aspergillus, Penicillium and Botrytis Cinerea. Non-pathogenic molds have also been shown to be a source of allergic hypersensitivity reactions.The ability of TYMC to detect only viable living cells from such a broad range of yeast and mold species may be considered an advantage in the newly emerging cannabis industry.

After California voted to legalize recreational marijuana, state regulatory agencies began exploring different cannabis testing methods to implement in order to ensure clean cannabis for the large influx of consumers.

Unlike Colorado, California is considering a different route and the recently released emergency regulations require testing for specific species of Aspergillus mold (A. fumigatus, A. flavus, A. niger and A. terreus). While Aspergillus can also be cultured and plated, it is difficult to differentiate morphological characteristics of each species on a plate and the risk of misidentification is high. Therefore, positive identification would require the use of DNA-based methods such as polymerase chain reaction testing, also known as PCR. PCR is a molecular biology technique that can detect species-specific strains of mold that are considered harmful through the amplification and analysis of DNA sequences present in cannabis. The standard PCR testing method can be divided into four steps:

The double stranded DNA in the cannabis sample is denatured by heat. This refers to splitting the double strand into single strands.
Primers, which are short single-stranded DNA sequences, are added to align with the corresponding section of the DNA. These primers can be directly or indirectly labeled with fluorescence.
DNA polymerase is introduced to extend the sequence, which results in two copies of the original double stranded DNA. DNA polymerases are enzymes that create DNA molecules by assembling nucleotides, the building blocks of DNA.
Once the double stranded DNA is created, the intensity of the resulting fluorescence signal can uncover the presence of specific species of harmful Aspergillus mold, such as fumigatus.

These steps can be repeated several times to amplify a very small amount of DNA in a sample. The primers will only bind to the corresponding sequence of DNA that matches that primer and this allows PCR to be very specific.

PCR testing is used in a wide variety of applications
Photo courtesy of USDA ARS & Peggy Greb.

PCR is a very sensitive and selective method with many applications. However, the instrumentation utilized can be very expensive, which would increase the overall cost of a compliance test. The high sensitivity of the method for the target DNA means that there are possibilities for a false positive. This has implications in the cannabis industry where samples that test positive for yeast and mold may need to go through a remediation process to kill the microbial impurities. These remediated samples may still fail a PCR-based microbial test due to the presence of the DNA. Another issue with the high selectivity of this method is that other species of potentially harmful yeast and mold would not even be detected. PCR is a technique that requires skill and training to perform and this, in turn, adds to the high overall cost of the test.

Both TYMC and PCR have associated advantages and disadvantages and it is important to take into account the cost, speed, selectivity, and sensitivity of each method. The differences between the two methodologies would lead to a large disparity in testing standards amongst labs in different states. In a nascent industry, it is prudent for state regulators to reference specific testing methodologies so that an industry standard can be established.

February 28, 2018

Carry On Cannabis: UK Parliament Debates Reform (Again)

By Marguerite Arnold

2 Comments

The British Parliament considered a new right last Friday – the right of chronically ill patients to treat their conditions with cannabinoids. The bill to reform the law and allow medical use, the Legalisation of Cannabis (Medicinal Purposes) Bill 2017-19 was also re-read. It was first introduced last October.

While reformers at this point are loath to do any more than publicly hope, events in the UK continue to unfold in favour of reform.

This time, it is in the wake of a highly upsetting and embarrassing incident that further highlights the human toll of prohibition. When the British Home Office (a combination of the State Department, Homeland Security and a few other federal U.S. agencies) refuses cannabis oil to six year-old Britons with epilepsy named Alfie, don’t expect the famed stiff upper lip in response.

Not anymore.Why on earth would a home-grown company deny treatment to a British kid with epilepsy?

Especially not when the rest of the EU is moving forward, Canada and Australia (both countries are a part of the British Commonwealth) are now firmly in the medical camp with Canada moving ahead with recreational use this summer. Not to mention continuing reform on both fronts in many U.S. states. Even with setbacks that include the Trump White House and Justice Department (the recently dismissed federal case in New York being just the latest casualty), recreational reform in California is an international beacon of change that will not go quietly into the night. Not now.

One of the more interesting aspects of the Dingley case in the UK, in sharp contrast, is how fast Parliament responded to the plight of the six-year-old and his mother. Not only has Dingley’s medical import license been reconsidered in Parliament, but the matter appears to have finally galvanized significant numbers of the British elected class to do something about an appalling situation that affects hundreds of thousands, if not millions of Brits too.

Cannabis Medical Refugees

Medical refugee policy, especially around cannabinoids, is at least as controversial as the other kind. In Europe and the rest of the world, just like cannabis reform itself, these are national, not state issues as they have been in the U.S., (where the issue of cannabis patient state “refugees” has nonetheless been an issue for most of this decade).

Outside of the U.S., however, it is still the case that national governments can be embarrassed into reform with the right case (or groups of them).

epidiolex — GW Pharma said their product Epidiolex (for the treatment of childhood epilepsy) is being considered by the European Medicines Agency

That was certainly true in Israel in 2014, when the so-called “15 Families” threatened to emigrate from Israel to Colorado unless the government allowed them to treat their sick kids (federal government policy was changed within a month). Not to mention an internal, state to state migration of families in the United States to Colorado around the same time.

It may also be true in this latest British case. The Home Office has been embroiled in a few embarrassing take backs of late, mostly on the topic of immigration of people. The Alfie-Dingley cannabis case hits both medical cannabis reform and lingering buyer’s remorse over Brexit where the British people actually live (and on topics they actually care about).

Refusing at least medical cannabis rights in the UK might also well tip the scales in favour of a redo on Brexit. Or at least capture the support of people who still dream of that possibility. While the UK is still part of the continent, British citizens also have the right to travel freely, with medical rights intact, to other countries and get treatment. The British are no strangers to this idea (in fact, many British retirees end up in Spain and Greece for precisely this reason). Add cannabis to the mix, and current British policy looks even more out of step with reality and the wishes of the British people. Even the older, more conservative and “middle class” (read: American working if not blue-collar class) ones.

Local Production and Prohibition

And then of course, there is this irony. GW Pharmaceuticals, one of the oldest, cannabis companies in the world, is located in the UK. It even grows its own crops there, and has a special license from the British government to do so.

Worse, in this particular situation, it also is busy bringing several cannabinoid-based anti-epileptic drugs (for children and adults) to the market.

Why on earth would a home-grown company deny treatment to a British kid with epilepsy? And how could a government grant a license to a company to develop the plant for profit, but not a child who desperately needs the drug to live?

In a move that seems more than coincidence, GW Pharma also reported this week that their product Epidiolex (for the treatment of childhood epilepsy) is being considered by the European Medicines Agency, while a separate drug also bound for the epilepsy market called GWP42006 had just failed a Phase IIa trial for focal seizures.

The business press of course, has mostly reported that the only impact of this development so far of course, is that the company took a hit on share price.

It might do a bit more than that. Starting with legislative reform and ending with the sparking of significant home-grown (and legal) competition.

The combined impact of a failed trial in Eastern Europe by the only British company licensed and qualified to produce medicinal cannabinoids for any reason, and the plight of a British boy at home who needs precisely this kind of drug (and has so far been denied it), might in fact be the tinder match that lights political and market reform if not the development of a cannabis industry (finally) in Great Britain.

If this doesn’t, probably nothing will.

February 22, 2018

Emerald Conference Showcases Research, Innovation in Cannabis

By Aaron G. Biros

No Comments

Last week, the 4^th annual Emerald Conference brought attendees from around the world to San Diego for two days of education, networking and collaboration. Leading experts from across the industry shared some of the latest research in sessions and posters with over 600 attendees. The foremost companies in cannabis testing, research and extraction brought their teams to exhibit and share cutting edge technology solutions.

The diversity in research topics was immense. Speakers touched on all of the latest research trends, including tissue culture as a micropropagation technique, phenotype hunting, pharmaceutical product formulation, chromatography methods and manufacturing standards, to name a few.

On the first day of the event, Ken Snoke, president of Emerald Scientific, gave his opening remarks, highlighting the importance of data-driven decisions in our industry, and how those decisions provide the framework and foundation for sound progress. “But data also fuels discovery,” says Snoke, discussing his remarks from the event. “I told a story of my own experience in San Diego almost 30 years ago while working in biotech, and how data analysis in a relatively mundane and routine screening program led to discovery. And how we (the folks at Emerald) believe that when we get our attendees together, that the networking and science/data that comes from this conference will not only support data-driven decisions for the foundation of the industry, but it will also lead to discovery. And that’s why we do this,” Snoke added.

Snoke says the quality of the content at the poster session was phenomenal and engaging. “We had over 500 attendees so we continue to grow, but it’s not just about growth for us,” says Snoke. “It’s about the quality of the content, and providing a forum for networking around that content. I met a scientist that said this conference renewed his faith in our industry. So I firmly believe that the event has and will continue to have a profound and immensely positive impact on our industry.”

Introducing speakers as one of the chairs for first session focused on production, Dr. Markus Roggen says he found a number of speakers delivered fascinating talks. “This year’s lineup of presentations and posters really showcase how far the cannabis industry has come along,” says Dr. Roggen. “The presentations by Roger Little, PhD and Monica Vialpando, PhD, both showed how basic research and the transfer of knowledge from other industries can push cannabis science forward. Dr. Brian Rohrback’s presentation on the use of chemometrics in the production of pharmaceutical cannabis formulations was particular inspiring.”

Shortly after Snoke gave his opening remarks, Dr. Roggen introduced the first speaker, Roger Little, Ph.D., owner of CTA, LLC. He presented his research findings on phenotype hunting and breeding with the help of a cannabis-testing laboratory. He discussed his experience working with local breeders and growers in Northern California to identify high-potency plants early in their growth. “You can effectively screen juvenile plants to predict THC potency at harvest,” says Dr. Little. The other research he discussed included some interesting findings on the role of Methyl jasmonate as an immune-response trigger. “I was looking at terpenes in other plants and there is this chemical called methyl jasmonate,” says Dr. Little. “It is produced in large numbers of other plants and is an immune response stimulator. This is produced from anything trying to harm the plant such as a yeast infection or mites biting the stem.” Dr. Little says that the terpene has been used on strawberries to increase vitamin C content and on tobacco plants to increase nicotine content, among other uses. “It is a very potent and ubiquitous molecule,” says Dr. Little. “Cannabis plants’ immune-response is protecting the seeds with cannabinoid production. We can trick plants to think they are infected and thus produce more cannabinoids, stimulating them to produce their own jasmonate.”

Dr. Hope Jones, chief scientific officer of C4 Laboratories, spoke about tissue culture as an effective micropropagation technique, providing attendees with a basic understanding of the science behind it, and giving some estimates for how it could effectively replace cloning and the use of mother plants. You could overhear attendees discussing her talk throughout the remainder of the show.

Dr. Jones has worked with CIJ on a series of articles to help explain cannabis tissue culture, which you can find here. “In this example, we started with one vessel with 4 explants,” says Dr. Jones. “Which when subcultured 4-6 weeks later, we now have 4 vessels with 16 plants.” She says this is instrumental in understanding how tissue culture micropropagation can help growers scale without the need for a ton of space and maintenance. From a single explant, you can potentially generate 70,000 plants after 48 weeks, according to Dr. Jones.

Those topics were just the first two of many presentations at Emerald Conference. You can take a look at some of the other presentation abstracts in the agenda here. The 5th Annual Emerald Conference in 2019 will be held February 28th through March 1^st in San Diego next year.