Tag Archives: cannabidiol

extraction equipment

THC Remediation of Hemp Extracts

By Darwin Millard
1 Comment
extraction equipment

Remediation of delta-9 tetrahydrocannabinol (d9-THC) has become a hot button issue in the United States ever since the Drug Enforcement Agency (DEA) released their changes to the definitions of marijuana, marijuana extract, and tetrahydrocannabinols exempting extracts and tetrahydrocannabinols of a cannabis plant containing 0.3% or less d9-THC on a dry weight basis from the Controlled Substances Act. That is because, as a direct consequence, all extracts and tetrahydrocannabinols of a cannabis plant containing more than 0.3% d9-THC became explicitly under the purview of the DEA, including work-in-progress “hemp extracts” that because of the extraction process are above the 0.3% d9-THC limit immediately upon creation.

The legal ramifications of these changes to the definitions on the “hemp extracts” marketplace will not be addressed. Instead, this article focuses on the amount of d9-THC that is available in the plant material prior to extraction and tracks a “hemp extract” from the point it falls out of compliance to the point it becomes compliant again and stresses the importance of accurate track-n-trace protocols at the processing facility. The model developed to support this article was intended to be academic and was designed to follow the d9-THC portion of a “hemp extract” through the lifecycle of a typical CO2-based extract from initial extraction to THC remediation. A loss to the equipment of 2% was used for each step.

Initial Extraction

For this exercise, a common processing scenario of 1000 kg of plant material at 10% cannabidiol (CBD) and 0.3% d9-THC by weight was modeled. This amount, depending on scale of operations, can be a facility’s total capacity for the day or the capacity for a single run. 1000 kg of plant material at 0.3% d9-THC has 3 kg of d9-THC that could be extracted, purified, and diverted into the marketplace. CO2 has a nominal extraction efficiency of 95%, meaning some cannabinoids are left behind in the plant material. The same can be said about the recovery of the extract from the equipment. Traces of extract will remain in the equipment and this little bit of material, if unaccounted for, can potentially open an operator up to legal consequences. Data for the initial extraction is shown in Image 1.

Image 1: Summary Data Table for Typical CO2-based Extraction of Phytocannabinoids

As soon as the initial extract is produced it is out of compliance with the 0.3% d9-THC limit to be classified as a “hemp extract”, and of the 3 kg of d9-THC available, the extract contains approx. 2.8 kg, because some of the d9-THC remains in the plant material and some is lost to the equipment.

Dewaxing via Winterization and Solvent Removal

Dewaxing a typical CO2 extract via winterization is a common process step. For this exercise, a wax content of 30% by weight was used. A process efficiency of 98% was attributed to the wax removal process and it was assumed that 100% of the loss can be accounted for in the residue recovered from the equipment rather than in the removed waxes. Data for the winterization and solvent recovery are shown in Image 2 and 3.

Image 2: Summary Data Table for Typical Winterization of a CO2 Extract
Image 3: Summary Data Table for Solvent Removal from a CO2 Extract

Two things occur during winterization and solvent removal, non-target constituents are removed from the extract and there is compounded loss from multiple pieces of process equipment. These steps increase the concentration of the d9-THC portion of the extract and produce two streams of noncompliant waste.

Decarboxylation & Devolatilization

Most cannabinoids in the plant material are in their acid form. For this exercise, 90% of the cannabinoids were considered to be acid forms. Decarboxylation is known to produce a mass difference of 87.7%, i.e. the neutral forms are 12.3% lighter than the acid forms. Heat was modeled as the primary driver and a process efficiency of 95% was used for the conversion rate during decarboxylation. To simplify the model, the remaining 5% acidic cannabinoids are presumed destroyed rather than degraded into other compounds because the portion of the cannabinoids which get destroyed versus degrade into other compounds varies from process to process.

Devolatilization is the process of removing low-molecular weight constituents from an extract to stabilize it prior to distillation. Since the molecular constituents of cannabis resin extracts vary from variety to variety and process to process, the extracts were assumed to consist of 10% volatile compounds. The model combines the decarboxylation and devolatilization steps to account for complete decarboxylation of the available acidic cannabinoids and ignores their weight contribution to the volatiles collected during devolatilization. Destroyed cannabinoids result in an amount of loss that can only be accounted for through a complete mass balance analysis. Data for decarboxylation and devolatilization are shown in Image 4.

Image 4: Summary Data Table for Decarboxylation and Devolatilization of a CO2 Extract

As the extract moves along the process train, the d9-THC concentration continues to increase. Decarboxylation further complicates traceability because there is both a known mass difference associated with the process and an unknown mass difference that must be calculated and justified.

Distillation

A two-pass distillation was modeled. On each pass a portion of the extract was removed to increase the cannabinoid concentration in the recovered material. Average data for distilled “hemp extracts” was used to ensure the model did not over- or underestimate the concentration of the cannabinoids in the distillate. The variables used to meet these data constraints were derived experimentally to match the model to the scenario described and are not indicative of an actual distillation. Data for distillation is shown in Image 5.

Image 5: Summary Data Table for Distillation of a Decarboxylated and Devolatilized Extract

After distillation, the d9-THC concentration is shown to have increased by 874% from the original concentration in the plant material. Roughly 2.2 kg of the available 3 kg of d9-THC remains in the extract, but 0.8 kg of d9-THC has either ended up in a waste stream or walking out the door.

Chromatography – THC Remediation Step 1

Chromatography was modeled to remove the d9-THC from the extract. Because there are several systems with variable efficiency rates at being able to selectively isolate the d9-THC peak from the eluent stream, the model used a 5% cut-off on the front-end and tail-end of the peak, i.e. 5% of the material before the d9-THC peak and 5% of the material after the d9-THC peak is assumed to be collected along with the d9-THC. Data for chromatography is shown in Image 6.

Image 6: Summary Data Table for d9-THC Removal using Chromatography

After chromatography, a minimum of three products are produced, compliant “hemp extract”, d9-THC extract, and noncompliant residue remaining in the equipment. The d9-THC extract modeled contains 2.1 kg of the available 3 kg in the plant material, and is 35% d9-THC by weight, an increase of 1335% from the distillation step and 11664% from the plant material.

CBN Creation – THC Remediation Step 2

For this exercise, the d9-THC extract was converted into cannabinol (CBN) using heat rather than cyclized into d8-THC, but a similar model could be used to account for this scenario. The conversion rate of the cannabinoids into CBN through heat degradation alone is low. Therefore, the model assumes half of the available cannabinoids in the d9-THC extract are converted to CBN. The entirety of the remaining portion of the cannabinoids are assumed to convert to some form of degradant rather than a portion getting destroyed. Data for THC destruction is shown in Image 7.

Image 7: Summary Data Table for THC Destruction through Degradation into CBN

Only after the CBN cyclization step has completed does the product that was the d9-THC extract become compliant and classifiable as a “hemp extract.”

Image 8: Summary Data Table for Reconciliation of the d9-THC Portion of the Hemp Extract

Throughout the process, from initial extraction to the final d9-THC remediation step, loss occurs. Of the 3 kg of d9-THC available in the plant material only 2.1 kg was recovered and converted to CBN. 0.9 kg was either lost to the equipment, destroyed in the process, attributable to the mass difference associated with decarboxylation, or was never extracted from the plant material in the first place. All of these potential areas of product loss should be identified, and their diversion risk fully assessed. Not every waste stream poses a risk of diversion, but some do; having a plan in place to handle waste the DEA considers a controlled substance is essential. Without a track-n-trace program following the d9-THC and identifying the potential risk of diversion would be impossible. The point of this is not to instill fear, instead the intention is to shed light on a very real issue “hemp extract” producers and state regulators need to understand to protect themselves and their marketplace from the DEA.

GW logo-2

Jazz Pharmaceuticals to Acquire GW Pharma

By Cannabis Industry Journal Staff
No Comments
GW logo-2

Last week, GW Pharmaceuticals (Nasdaq: GWPH) announced they have entered into an agreement with Jazz Pharmaceuticals (Nasdaq: JAZZ) for Jazz to acquire GW Pharma. Both boards of directors for the two companies have approved the deal and they expect the acquisition to close in the second quarter of 2021.

GW Pharma is well-known in the cannabis industry as producing the first and only FDA-approved drug containing CBD, Epidiolex. Epidiolex is approved for the treatment of seizures in rare diseases like severe forms of epilepsy. GW is also currently in phase 3 trials seeking FDA approval for a similar drug, Nabiximols, that treats spasms from conditions like multiple sclerosis and spinal cord injuries.

Jazz Pharmaceuticals is a biopharmaceutical company based in Ireland that is known for its drug Xyrem, which is approved by the FDA to treat narcolepsy.

Bruce Cozadd, chairman and CEO of Jazz, says the acquisition will bring together two companies that have a track record of developing “differentiated therapies,” adding to their portfolio of sleep medicine and their growing oncology business. “We are excited to add GW’s industry-leading cannabinoid platform, innovative pipeline and products, which will strengthen and broaden our neuroscience portfolio, further diversify our revenue and drive sustainable, long-term value creation opportunities,” says Cozadd.

Justin Gover, CEO of GW Pharma, says the two companies share a vision for developing and commercializing innovative medicines, with a focus on neuroscience. “Over the last two decades, GW has built an unparalleled global leadership position in cannabinoid science, including the successful launch of Epidiolex, a breakthrough product within the field of epilepsy, and a diverse and robust neuroscience pipeline,” says Gover. “We believe that Jazz is an ideal growth partner that is committed to supporting our commercial efforts, as well as ongoing clinical and research programs.”

Molson Coors Joint Venture Selects Quicksilver Scientific as Technology Partner

By Cannabis Industry Journal Staff
No Comments

According to a press release published this week, Quicksilver Scientific, a nanoemulsion delivery technology company, announced a partnership with Truss CBD USA, which is the joint venture between Molson Coors and HEXO Cannabis.

Quicksilver is a manufacturer of nutritional supplements that uses a patent-pending nanoemulsion delivery technology. Their technology is what enables companies to produce cannabinoid-infused beverages.

Because cannabinoids like CBD are hydrophobic, meaning they are not water-soluble, companies have to use nanoemulsion technology to infuse beverages. Without this technology, beverages with cannabinoids would have inconsistent levels of compounds and they wouldn’t work well to actually deliver the cannabinoids to the body. Nanoemulsion essentially cannabinoids water soluble, thus allowing the delivery of cannabinoids to the bloodstream, increasing bioavailability.

Dr. Christopher Shade, Ph.D., founder & CEO of Quicksilver Scientific says they have perfected their nanoemulsion technology over the past decade. “CBD is not water-soluble, which creates challenges for manufacturers when attempting to mix it into beverages,” says Dr. Shade. “Our innovative nanoemulsion technology overcomes these challenges by encapsulating nano-sized CBD particles in water-soluble spheres that can be directly added to beverages. The result is a clear, great-tasting product with greater bioavailability, a measure of a compound’s concentration that is absorbed into the body’s bloodstream.”

The Veryvell beverage product line

Quicksilver is providing their technology to be used with Veryvell, the joint venture’s new line of non-alcoholic, hemp-derived CBD beverages. The beverage line is already available in the Colorado market. According to the press release, the three product offerings include: “Focus” (grapefruit and tarragon with ginseng and guarana), “Mind & Body” (strawberry and hibiscus with ashwagandha and elderberry) and “Unwind” (blueberry and lavender flavors with ashwagandha and L-Theanine).

Leaders in Cannabis Formulations: Part 1

By Aaron Green
No Comments

Natural cannabinoid distillates and isolates are hydrophobic oils and solids, meaning that they do not mix well with water. By formulating these ingredients using various technologies, companies like Caliper and Ripple have learned how to change the solubility properties of the cannabinoids. In addition, formulations can improve bioavailability and onset time of the cannabinoids.

Stillwater Brands is a cannabis formulation company based out of Denver, Colorado, leveraging proprietary technologies for solubilizing cannabinoids in water. Stillwater has a partnership with the Canadian company Green Organic Dutchman and will soon expand their THC line of products, Ripple, into Michigan. Their CBD product line, Caliper, is already sold nationally.

We spoke with Drew Hathaway, senior food scientist at Stillwater, about the Stillwater technology and aspirations for growth. Hathaway joined Stillwater in 2018 after engaging with them as a technical sales representative in his previous role at a food ingredients supplier.

Aaron Green: What trends are you following in the industry?

Drew Hathaway: I can mainly speak to the science side of the business since that’s where I operate, but I do have some insight into the marketing approach and some of the things we look at. We’re looking at traditional food and beverage trends, whether it’s beverage formats, with its unique ingredients that are going to be general flavor trends, which can definitely be very region-specific. One of the things we definitely look at, especially on the THC side, is dosage differences. What are people putting their dosages at? Are they doing a combination of cannabinoids or terpenes? Are they really using individual ingredients? I think that’s something that’s been fairly well established in the THC market, especially since you have the regulatory mandate of 10 milligrams THC being your max single dose.

Drew Hathaway, senior food scientist at Stillwater

When Stillwater first launched in 2016, our company started with lower dose products to provide microdose options. We focus all of our products on functional foods for consumers. It’s why we have three different options for every single one of our products. We have what we call the Pure 10 which is 10 milligrams of THC per serving. We have what we call the Balanced 5. That’s 5 milligrams THC, 5 milligrams of CBD. Then as well as our Ripple Relief, which is a 40 to one ratio of CBD to THC at 20 milligrams CBD and 0.5 milligrams THC. We provide a variety of options for people looking for different dosage levels. We have to look at all of those trends. Packaging trends are also high on our radar.

Aaron: How about flavors?

Drew: We recently launched additional SKUs for our Ripple gummies here in Colorado. We have four different options. We have a sour variety pack that contains sour watermelon, sour apple and sour peach. We also just launched peach cherry, kiwi apple and sour watermelon by itself — and all of those are at the five milligram THC per gummy dose. That aligns with the Pure 10 line as well. We also have been working on some new flavors for the 10 milligram THC quicksticks, which we’re looking to launch early next year. Then, like I mentioned earlier, we’re expanding into Michigan with the THC business, which has been a big goal for us and something that’s gotten a lot of effort behind the scenes.

Aaron: So Drew, how did you get involved at Stillwater?

Drew: I like to describe myself as a traditionally educated food scientist. I went to college and got my bachelor’s and master’s in food science and technology at Ohio State. And then I ended up at a really cool company that was a very large food ingredient supplier. I was technical support to sales for their team. Through that position, I covered the Colorado territory as well as California and I got to cover Stillwater as one of my customers providing technical advice on different products and ingredients that they were looking at. I got involved with Stillwater through that position, back in the early days when they were still trying to develop and figure things out. That would have probably been about four years ago. I was able to see from the sidelines and I was dealing with some other cannabis companies in the space here in Colorado at the time too.

I recognized very early on what they were trying to do by making cannabinoids water soluble and water compatible. It was not only extremely challenging, but also had a ton of potential if they were able to pull it off. At that point, they were still trying to figure out how this is going to work. How do we produce it? How do we sell it? How do we make sure that things are stable? Things of that nature. I got an inside look at Stillwater from the very start, back when there were really only a few people at the company. I would check in with them regularly as they needed help.

I always joked that they were my least important, most interesting customer and I mean that only because they were buying extremely small amounts of ingredients from us. From a sales perspective, naturally, my manager didn’t necessarily want me spending a ton of time working with them. From a personal interest perspective, I was like, “these guys are doing something really intriguing and if they can pull this off this has a ton of potential, so I want to help them however I can.”

I dealt with them in that sales capacity for about two years before they talked about expanding into the CBD space with the Farm Bill passing at the end of 2018. I recognized at that point that I think they had two scientists including Keith, our head of R&D, and I said “alright, that’s really ambitious. You probably need some help! I think it’s time for me to take the leap and see if you guys are interested in having me come on board.” Fortunately, they were and so I’ve been with the company a little over two years now.

Aaron: Can you explain at a high level what the Stillwater products do?

Drew: The base technology behind all of our products for Ripple and Caliper is essentially converting your fat-soluble cannabinoids, whether it’s CBD or THC, into a water compatible product in a process referred to as emulsification. What you’re essentially doing is taking CBD and THC containing oils, whether it’s a distillate or isolate, and you’re essentially breaking those fat droplets into extremely small droplets and then stabilizing them at that size. We make our own emulsion — the fat droplets are extremely small — then when you draw that down into a powder format and redissolve it into water, you are dispersing billions upon millions of fat droplets into your glass. Those droplets are evenly dispersed through the beverage so that you get the same amount of THC or CBD in your first sip that you get in the last sip. That’s really the core technology behind everything that we do.

Taking cannabinoids and making them water soluble is the base technology necessary in order to make something like a shelf-stable infused beverage. There’s no way that you’re going to take traditional distillates or cannabinoids and be able to make a beverage that is shelf-stable otherwise. It’s been really cool since joining Stillwater to learn and understand how that process changes the way that those cannabinoids are absorbed by your body. Emulsification changes things like the onset time, as well as the total amount of cannabinoids your body’s absorbing and using. That’s been something that’s super interesting to see through the clinical research that we’ve done with human participants through Colorado State University.

Aaron: Let’s say if you just take THC oil and put it into an infused product. What’s the difference between that and Ripple?

Drew: Some products formats, such as beverages, just aren’t possible with THC oil without an emulsification technology. As the old saying goes in science, water and oil just don’t mix. So, if you were to take a traditional THC distillate and try to add it to a beverage, that would just float on top as a big oil slick. When you took your first sip, you would essentially get all of the cannabinoids in your first gulp which not only makes precise or partial dosing impossible, but also would taste absolutely terrible. Emulsification makes those infused beverage products possible and stable over a normal one-year shelf life or potentially longer.

Emulsification also changes the way that your body absorbs those cannabinoids, which is something that we’ve definitely put a heavy emphasis on and have really been able to validate with clinical research. I think that’s one of our biggest differentiators versus our competitors. We’re definitely not the only ones in the water-soluble cannabinoid space, but from my understanding, I think we’re one of the few companies that have actually executed human-based clinical trials (vs rodents) through a third-party university and been able to prove that these cannabinoids are detected in your bloodstream as fast as 10 minutes after consumption. We measured those results directly against an oil-based control, where you’re not going to get a peak absorption until maybe 60 to 90 minutes after consumption. What this research found was that not only was our product absorbed much faster, but it also enabled a significantly higher amount of the cannabinoids to actually make it into the participants’ blood stream where it can be used by their bodies. We also found the type of food emulsifier makes a significant difference in absorption – not just emulsion size, counter to common belief.

We use the analogy, “It’s getting a better bang for your buck.” The main purchasing consideration for a lot of edibles consumers when you go to a dispensary is “what is my cost per 10 milligram dose of THC?” That’s one of their key purchasing parameters, especially for your lower budget customer. What’s great with Ripple is one milligram of THC consumed through our Ripple technology is not really equivalent to one milligram of an oil-based product and that your body is actually going to absorb a higher percentage of it. And therefore, you’re going to get more of an effect, whether you’re looking for a medical effect or whether you’re looking for more of a recreational therapeutic effect. It also improves the consistency of that experience. So, with oil-based products, you could have the same products multiple different times and based on what you recently ate, you might get a higher or lower absorption rate or a faster or slower absorption rate. It’s also in the consistency of the experience and I know that from our market research of our consumers of Ripple products here in Colorado since that’s been in the market for a few years now. That’s the number one reason why people really trust our brand is because they can count on getting a consistent experience every time for the same dose.

As we all know, with the THC market and edibles market being newer in general, that’s most people’s biggest fear, especially if you’re a new consumer of THC — you obviously don’t want to consume more than what you can handle as far as getting higher than you want to be or anything like that — So consistency is a really, really key aspect for us and something that I’m definitely proud that we can provide that for our consumers.

Aaron: What does your product look like when you dissolve it into a liquid – let’s say something clear? Is the resulting mixture clear or cloudy?

Drew: We do have liquid concentrates, especially in the Caliper side of things, but with our powders, it kind of billows in as a cloud when you add it to a clear liquid. You can almost think of it like when we pour creamer into coffee: you see the cloud expand and then slowly fill out the cup and then be fully mixed in. Whereas with our products if you pour it into clear water, and you’ll see this white cloud form and then disperse. The final solution is generally a little bit cloudy depending on how much water you add it to.“I’ve been fortunate to be the lead developer for those products for Caliper and for Ripple, and flavor work is definitely something that never gets old.”

Aaron: How are customers using your products?

Drew: For a long time, we’ve had a variety of products in the market, some of which are still in the market, and some of which we’ve pulled since then. The key product for us has always been the Ripple dissolvable powder. It’s an unflavored, unsweetened powder that comes in a little sachet packet that you can tear open just like you would any other product and add to really anything. With its water compatibility, there’s really not a single product that you can’t add it to. It’s been really cool to see through social media, and in general, consumer engagement is electric and is kind of viewed as a novelty. The initial reaction is “Oh, I can take this little powder, put it in my eggs and now I have infused eggs!” It’s been great to see the creativity that our consumers have. We’ve seen it put in such a wide variety of products that literally you can make anything into an edible. I think that’s one of the coolest aspects of that product and why it’s been so successful.

One of the things we did realize pretty fast is that for a lot of people, the convenience and the consistency of the experience was a main driver for why they were purchasing our products. A lot of our real consumers just take that packet apart, ripping it open and pouring it straight in their mouth. It’s the fastest and most convenient way to consume the products, pretty much anywhere. We dug into that with our more recent launch of Ripple Quicksticks. And then we added some flavor, we added a little bit of sugar and sweeteners to make it a consumer-friendly experience where you get a really enjoyable flavor. It’s still just as convenient to consume by just ripping the packet straight open and pouring it in your mouth.

Aaron: It sounds like there must have been some interesting internal product development testing!

Drew: Yeah, definitely. That’s a fun one. I’ve been fortunate to be the lead developer for those products for Caliper and for Ripple, and flavor work is definitely something that never gets old. It can be frustrating at times, it’s definitely not the easiest thing to do. We’ve looked at traditional berry flavors, citrus flavors, as well as weird, kind of out-there flavors, to see what we like and what we think will work with our consumers.

Aaron: What states do you operate in?

Drew: Currently, our Stillwater THC business only operates in Colorado. That’s essentially the genesis of all the companies (Ripple, Caliper) is Stillwater being here in Colorado. We’re excited to announce that we’re expanding to Michigan next year. That’s something that we’ve all been working pretty heavily on developing and getting ready to go. That will be our first expansion of the THC brand to a different state.

We do have a licensing and distribution agreement with The Green Organic Dutchman (TGOD) in Canada. They produce our products using the same technology up there and license also under the Ripple brand name. So, it’s great to see the presence that we’ve been able to expand up there.

Then with Caliper on the CBD side of things with Caliper Ingredients and Caliper Consumer. We operate nationwide for that based on the more recent rules with the 2018 Farm Bill. For me, especially working across all of those business units, it’s really interesting to see the different business approach between your target CBD consumers and your target THC consumers because they’re really different markets. There’s definitely some overlap, but you’re targeting a different demographic to a certain degree. We keep those decisions in mind when we’re choosing how to market and what flavors to use and what products to make. So that’s been really interesting for me to see the behind-the-scenes discussions.

Aaron: I saw on your website, you’ve got consumer options via the dispensaries. Do you work with any infused product manufacturers on a licensing basis or partnership basis?“I’m super excited to continue to see how the medical research will continue to evolve.”

Drew: I’d say the majority of them are definitely on the CBD side for Caliper, partly because the regulatory environment of CBD just is a little bit easier to kind of engage other customers and to sell products across state lines and things of that nature. We do have some partnerships with some of the companies here in Colorado. I’d say the main one that we’ve promoted externally is with Oh Hi infused Seltzers based out of Durango, Colorado. It’s been a great agreement where we provide our base technology via liquid Ripple formulation that they can then infuse into their seltzers. They’ve done a great job with those products and it’s definitely a partnership that’s been mutually beneficial.

Aaron: What are you personally interested in learning more about?

Drew: For me, the whole appeal of joining the industry was research. With prohibition and decades of those restrictions preventing true research there are so many unknown questions that still need to be investigated. I’m super excited to continue to see how the medical research will continue to evolve. I think we’ll get better clarity on the efficacy of individual cannabinoids versus different combinations and ratios of cannabinoids. The entourage effect is something that’s pretty heavily talked about in the industry. I do think there’s some research to support that. I also think there’s still way more unknowns than things that we actually know. So, I’m super interested in seeing how our understanding of everything will continue to improve over time.

I’d love to see the medical research eventually expand into what synergistic benefits exist between cannabinoids and other bioactive ingredients such as turmeric, catechins, antioxidants and other plant-based ingredients that have gotten a lot more interest through the medical research in the last decade.

Then one of the things I’m always excited about being on the science side of things is we’re still investigating the general compatibility of cannabinoids with various types of food and beverage products. That goes not only for ingredient interactions, but also factors like pH, water activity and moisture content. Even packaging definitely plays a role in cannabinoid stability for a variety of products. There’s also a variety of production processing technologies that still need additional investigation, whether you’re talking pasteurization, for beverages, or retort for canned products or newer technologies like high pressure processing (HPP). So, I think the most exciting thing for me, and the reason I was really willing and interested in joining the industry, is there’s so much to learn. I don’t think we’ll ever run out of things to explore. I think as an industry the better we conduct this research, the better off we’ll all be.

Aaron: That’s the end of the interview! Thanks Drew.

Kennebec Analytical Acquires Cannabis Testing Laboratories

By Cannabis Industry Journal Staff
No Comments

According to a press release sent out last week, Kennebec Analytical Services (KAS) announced that they have acquired Cannabis Testing Laboratories (CTL), which was previously owned by Doane University. KAS is based in Lincoln, Nebraska and provides testing services for hemp and CBD producers in Nebraska.

CTL was a wholly-owned subsidiary of Doane University, renting space at the liberal arts college based in Crete, Nebraska. CTL gained ISO 17025 accreditation back in July of this year.

CTL operates independently of the university, but the lab is a resource for faculty and students. There are internship and experiential learning opportunities available at the lab for students. In addition to that, the lab also helps faculty that teach cannabis-related courses.

Last year, Doane University announced the launch of their Professional Cannabis Certificate Program. In June of this year, the university expanded their course offerings in cannabis, with seven courses available this fall semester.

Concetta DiRusso, Ph.D. is the CEO of KAS and says CTL has done provided testing for over 50% of Nebraska’s hemp market and provides hemp farmers with educational resources as the market gets off the ground. “Drs. Andrea Holmes, CTL founder, and Arin Sutlief, Laboratory Director, have done an outstanding job for Nebraska hemp farmers,” says Dr. DiRusso. “KAS is committed to continuing these valuable relationships and services for the hemp and CBD industries.”

How GW Pharma Won CBD

By Cathleen Rocco
No Comments

As of this writing, the United States Food and Drug Administration (FDA) has approved GW Pharma’s CBD drug Epidiolex for treating profound refractory pediatric epilepsy syndromes (Dravet syndrome and Lennox Gastaut syndrome) as well as for treating seizures associated with tuberous sclerosis complex (TSC) in patients one year of age or older. The product is a very simple, orally-administered formulation comprised of 100mg/ml cannabidiol (CBD), dehydrated alcohol, sesame seed oil, strawberry flavor and sucralose – basically, an alcohol-based solution with sesame seed oil to help solubilize the CBD oil, flavoring and sweetener.

GW logo-2On April 6th, 2020 GW Pharma performed a regulatory miracle when they succeeded in convincing the Drug Enforcement Administration (DEA) to deschedule Epidiolex (i.e., remove it from the Schedule 1 and Schedule 5 lists of substances that the agency regulates due to concerns regarding safety, potential for abuse or both) for all indications – including indications for which it has not yet been approved by the FDA.1 The benefit to GW of having their product descheduled is incalculable. This status change removed potential barriers to insurance reimbursement and made the need to set up and administer an expensive REMS2 drug safety program less likely. In part because of this regulatory coup d’état, the drug recently posted yearly earnings of nearly $300 million.

It is important to note that the DEA descheduled the Epidiolex formulation and not cannabis-derived CBD itself. Thus, GW Pharma is now in the enviable position of being the only company that can legally sell cannabis-derived CBD. More importantly, because the DEA descheduled the formulation and not the active ingredient, other companies who wish to market cannabis-derived CBD pharmaceutical formulations will have to repeat whatever it is that GW did to get Epidiolex descheduled.3 The DEA effectively gave the company a huge head start with respect to competitors who are developing other cannabis-derived CBD formulations that would compete with Epidiolex. That advantage will remain in place unless and until cannabis-derived CBD itself is descheduled or cannabis is legalized at the federal level.

GW Pharma’s CBD drug Epidiolex, which is FDA-approved to treat profound refractory pediatric epilepsy syndromes

GW Pharma’s attorneys demonstrated considerable virtuosity in devising this approach. However, there is another aspect of the GW Pharma story – one that could have profound implications for the exploding CBD consumer packaged goods (CPG) industry. The Federal Food, Drug, and Cosmetics Act4 (FFDCA) prohibits the introduction into interstate commerce of any food to which has been added an approved drug or a drug for which substantial clinical investigations have been instituted and made public.5 Because CBD was and is still the subject of clinical trials run by GW Pharma and others, even hemp-derived CBD is currently illegal to use as a food additive or dietary supplement under the FDCA

The FDA has recently re-started the public commentary stage of a long process that will hopefully result in the creation of a regulatory pathway for CBD to be used as a food additive – something that would seemingly be a straightforward matter given the copious amounts of safety data being generated from all of GW Pharma’s clinical trials. However, as long as the FDA continues to drag its feet in providing a regulatory pathway for CBD CPG products, CBD, regardless of its source, will remain illegal to use as a food additive or supplement under either the CSA or the FFDCA despite the existence of safety data obtained through the Epidiolex clinical trials. If, as many people in the industry anticipate, the agency decides to begin enforcement action, this could have a hugely negative impact on the industry.

In addition to the potentially disastrous effect that federal law could have on an important new industry, the federal regulatory scheme introduces unnecessary regulatory complexity and cost by imposing two different regulatory schemes depending on the source of the CBD. CBD derived from hemp is chemically identical to CBD derived from cannabis. Despite that identity, the 2018 Farm Bill nonsensically exempts only hemp-derived CBD from the Controlled Substances Act. If a regulatory pathway is created for hemp-derived CBD, but the DEA insists on maintaining cannabis-derived CBD as a schedule 1 substance, then the same molecule will be subject to two different regulatory schemes. This scenario would require tracking and certifying CBD sources and thereby impose regulatory and economic burdens that are entirely unnecessary from a public health point of view.

FDAlogoAn alternative, economically disastrous scenario: given the pharmaceutical industry’s formidable lobbying power, it is entirely possible that the FDA could decide to limit the use of CBD exclusively in prescription drug formulations. This could kill the entire US hemp CBD CPG industry, currently estimated to reach $22 billion by 2022.6

Overall, the current state of affairs is unfair, expensive, uncertain and entirely unworkable over the long term. The CSA must be amended, ideally to deschedule both hemp and cannabis entirely, but at least in the short term, to deschedule CBD and preferably all non-THC cannabinoids regardless of their source. Further, the FDA must provide a regulatory pathway to allow the use of low doses of cannabinoids shown to be safe, either by existing clinical trial data or future testing pursuant to the NDIN submission process.

A 2019 Gallup poll found that 14% of Americans – 1 in 7 – use CBD products.7 The demand is there, the industry is thriving, and adequate safety data exists to justify a regulatory system that allows low-dose over the counter CBD products provided those products are produced using Current Good Manufacturing Practices (CGMPs) for food and dietary supplement manufacturing prescribed by the FDA and that such products undergo regular testing that demonstrates they are safe, unadulterated and accurately labeled. It is time for the industry to collectively fund a New Dietary Ingredient Notification (NDIN) submission that would provide safety data sufficiently compelling to force the FDA to either recognize CBD and other non-THC cannabinoids as being GRAS substances regardless of their source, or in the alternative create a regulatory path for CPG products containing low-doses of CBD and other non-THC cannabinoids.

Editor’s Note: The opinions expressed in this publication are those of its author. They do not purport to reflect the opinions or views of the Cannabis Industry Journal, its editorial staff or its employees.


References

  1. Clincialtrials.gov lists 256 different clinical trials in which Epidiolex has been, is being or will be tested for a wide variety of other indications, including but not limited to opioid use disorder, several types of prostate cancer, alcohol use disorder, musculoskeletal pain, and a host of others.
  2. REMS – risk evaluation and mitigation strategy – are drug safety programs that the FDA requires in cases where mediations pose serious safety concerns with respect to potential abuse and other adverse effects.
  3. Exactly what they did isn’t clear, and won’t be for a long while given the snail’s pace at which FOIA requests are filled.
  4. Title 21 United States Code Chapter 9
  5. Title 21 United States Cod Chapter 9, Sections 331(ll), 342(a)(1) and Section 342(d)(f)(1)
  6. “Exclusive: New Report Predicts CBD Market Will Hit $22 Billion by 2022” Rolling Stone Magazine, September 11, 2018, citing cannabis industry analysis from the Brightfield Group.
  7. Gallup poll on American CBD product usage

Overcoming Challenges in the Private Label CBD Industry

By Josh Epstein
1 Comment

Private labelling, or white labelling, is a popular option for brands looking to enter the CBD space. This practice is where a product is manufactured by one company but branded, marketed and sold by another.

There are several companies that specialize in manufacturing end-to-end finished CBD products. They commonly provide third-party test results, certificates and data to verify the purity and potency of products created. Technically, all new brands need to do is place their label on the package and start selling! However with any new venture, establishing a successful private label CBD brand will inevitably mean various challenges need to be overcome.

Securing Quality Sources of CBD

Finding the right partners to work with is a must. The best way to source credible and trustworthy suppliers and manufacturers is to look for certifications and audits from third-party agencies. These include the Global Food Safety Initiative (GFSI), the Safe Quality Food (SQF), the United States Department of Agriculture’s (USDA) organic certification program and others.

The USDA organic certification program is a rigorous multi-step audit process to increase supply chain sustainability. Organic certification is a form of elective, self-regulation for manufacturers which consumers have eagerly welcomed into the marketplace. Look for the USDA organic seal to help identify which manufacturers are trustworthy and can produce a range of organic products.

From a consumer perspective, certifying your products as organic is an additional way to provide both supply chain transparency and increase confidence when trying new CBD products. It also provides a form of quality assurance to skeptical consumers, especially those who avidly read product labels prior to making a purchasing decision. Members of this “label reader” demographic will consistently choose organic products for the quality and transparency they provide with pure and natural ingredients.

Creating a Unique Product

Innovation and creativity will continue to be important differentiators due to the highly competitive nature of the CBD marketplace. New ingredient innovations such as water dispersible materials are big game-changers. From chewing gum to energy drinks, the opportunities for new and unique CBD products under your own private label are limitless.

Just some of the many hemp-derived CBD products on the market today.

There are only a handful of CBD brands who are willing, or even able, to be certified organic today. USDA certification is an opportunity for brands looking to adapt to changing consumer preferences, diversify their product offerings and invest in supply chain transparency.

In the past, product differentiators involved third-party lab testing or providing COAs — today that’s just industry standard. The USDA organic seal is becoming one of the hemp industry’s most coveted certifications because it is a product differentiator.

Building Credibility

Trustworthiness, transparency and traceability are important factors for consumers to consider when shopping for products. These factors should also be considered when producing products and while vetting vendors, partners, stakeholders and supply chain suppliers.

Credible certifications allow consumers to make informed decisions while feeling confident that they are purchasing products from reputable sources. Research has shown that today’s CBD market lacks credibility while consumers are desperately seeking comfort and are eager to purchase from trustworthy brands.

A Survey of State CBD & Hemp Regulation Since The 2018 Farm Bill

By Brett Schuman, Jennifer Fisher, Brendan Radke, Gina Faldetta
1 Comment

Since the December 20, 2018 enactment of the Agricultural Improvement Act of 2018, better known as the Farm Bill, we have seen a number of new state laws addressing both the legality of hemp and products derived therefrom, most noticeably cannabidiol, better known as CBD. This piece provides a brief overview of some of the more interesting state laws concerning hemp and CBD, as well as recent developments.

Legality of Hemp

Since the passage of the Farm Bill, the vast majority of states have legalized the cultivation and sale of hemp and hemp products. However, certain states maintain laws barring some or even most forms of hemp.

The most stringent of those states is Idaho, where hemp remains illegal. In March 2020, Senate Bill 1345 – legislation that would have allowed for the production and processing of industrial hemp – died in the House State Affairs Committee, due to concerns that legalizing hemp would be the first step toward legalizing “marijuana”; that the bill contained too much regulation and that it was otherwise unworkable. As a result, Idaho is currently the only state without a legal hemp industry. Hemp with any THC, even at or below the 0.3 percent threshold under the Farm Bill, is considered equivalent to “marijuana” in Idaho and is illegal (see below for a discussion of CBD in Idaho).

Indiana, Iowa, Louisiana, and Texas have enacted bans on smokable hemp. Indiana law prohibits hemp products “in a form that allows THC to be introduced into the human body by inhalation of smoke.” Iowa has amended its Hemp Act to ban products introduced to the body “by any method of inhalation.” Louisiana prohibits “any part of hemp for inhalation” except hemp rolling papers, and Texas law prohibits “consumable hemp products for smoking.”

Some of these bans have been challenged in court. In Indiana, a group of hemp sellers requested an injunction against the smokable hemp ban in federal court, on the grounds that the federal Farm Bill likely preempted the Indiana law. In September of 2019, the district court issued the requested injunction, but the U.S. Court of Appeals for the Seventh Circuit overturned that decision in July 2020, stating that the order “swept too broadly.” The Seventh Circuit noted that the 2018 Farm Bill “expressly provides that the states retain the authority to regulate the production of hemp” and remanded the case for further proceedings.

Similarly, in Texas, hemp producers have sued in state court over the smokable hemp ban, questioning its constitutionality and arguing that it would result in a loss of jobs and tax revenue for the state. According to those producers, smokable hemp comprises up to 50 percent of revenue from hemp products. On September 17, 2020, Travis County Judge Lora Livingston issued a temporary injunction blocking enforcement of the law until trial, which currently is set to commence on February 1, 2021. Judge Livingston had previously issued a temporary restraining order to that same effect.

State Laws Regulating CBD

State laws and regulation on hemp-derived CBD are varied, and the legality of a CBD product often comes down to its form and marketing.

FDAlogoAs an initial matter, it must be noted that notwithstanding the Farm Bill the FDA currently prohibits hemp-derived CBD from being be sold as dietary supplements, and food (including animal food or feed) to which CBD has been added cannot be introduced into interstate commerce. As discussed below, a substantial minority of states, including California, follow the FDA’s current position on the permissibility of putting hemp-derived CBD in food or dietary supplements.

Certain states include strict limitations on CBD, none more so than (once again) Idaho. Lacking any legal hemp industry, Idaho restricts CBD products to those having no THC whatsoever, rejecting the generally accepted threshold of not more than 0.3 percent THC. Idaho law also requires that hemp CBD be derived only from “(a) mature stalks of the plant, (b) fiber produced from the stalks, (c) oil or cake made from the seeds or the achene of such plant, (d) any other compound, manufacture, salt, derivative, mixture, or preparation of the mature stalks, or (e) the sterilized seed of such plant which is incapable of germination.”

Kansas similarly prohibits CBD with any amount of THC, though the law is murkier than Idaho’s. While Senate Bill 282 allowed possession and retail sale of CBD effective May 24, 2018 by removing CBD oil from the definition of “marijuana,” this was broadly interpreted to apply to THC-free CBD only. Later legislation, Senate Substitute for HC 2167, effective July 2019, allowed the farming of hemp with THC levels aligned with the Farm Bill definition (i.e., 0.3 percent THC or lower), but expressly prohibited the use of industrial hemp in: cigars, cigarettes, chew, dip, or other smokeless forms of consumption; teas; liquids for use in vaporizing devices; or “[a] ny other hemp product intended for human or animal consumption containing any ingredient derived from industrial hemp that is prohibited pursuant to the Kansas Food, Drug and Cosmetic Act or the Kansas Commercial Feeding Stuffs Act,” though this final section provides that “[t] his does not otherwise prohibit the use of any such ingredient, including cannabidiol oil, in hemp products,” the law’s only reference to CBD. The Kansas Bureau of Investigation has reportedly made statements indicating that CBD with any level of THC remains illegal.

Just some of the many hemp-derived CBD products on the market today.

Mississippi only recently legalized the cultivation of hemp via Senate Bill 2725, the Mississippi Help Cultivation Act, which was signed into law on June 29, 2020. House Bill 1547, passed on April 16, 2019, imposed content requirements upon CBD products within Mississippi: to be legal in Mississippi, a CBD product must contain “a minimum ratio of twenty-to-one cannabidiol to tetrahydrocannabinol (20:1 cannabidiol:tetrahydrocannabinol), and diluted so as to contain at least fifty (50) milligrams of cannabidiol per milliliter, with not more than two and one-half (2.5) milligrams of tetrahydrocannabinol per milliliter.” Moreover, CBD products produced in Mississippi must be tested at the University of Mississippi’s lab. However, subject to these restrictions, Mississippi allows the sale of CBD products, including edibles, contrary to the restrictions of many of states considered friendlier to hemp.

Perhaps more surprising is Hawaii, which restricts the sale and distribution of CBD, aligning with the FDA’s guidance. In Hawaii it is illegal to add CBD to food, beverages, as well as to sell it as a dietary supplement or market it by asserting health claims. It is also illegal to add CBD to cosmetics, an uncommon restriction across the many states with CBD-specific laws and regulations. Unlike Idaho and Mississippi, which have no medical marijuana programs, Hawaii has long legalized marijuana for medical purposes and in January 2020 decriminalized recreational possession. Hawaii very recently enacted legislation allowing the production and sale of cannabis-infused consumable and topical products by medical cannabis licensees effective January 1, 2021, but this legislation did not address CBD. Given the foregoing, Hawaii’s restrictions on CBD stand out.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

Beyond broad CBD restrictions, many more states prohibit the use of CBD within food, beverages, or as dietary supplements. For instance, twenty states – including California, Georgia, Illinois, Massachusetts, Michigan, New Jersey, New York, and Washington – prohibit the sale of CBD in food or beverage. In California, a bill to overhaul California’s hemp laws, Assembly Bill 2028, failed when the legislative session concluded on August 31, 2020 without a vote. AB 2028 would have allowed CBD in food, beverages, and dietary supplements (though, interestingly, it would have banned smokable hemp). As a result, California remains a relatively restrictive state when it comes to hemp-derived CBD, notwithstanding the legality of recreational marijuana.

New York allows the manufacture and sale of CBD, but requires CBD products to be labeled as “dietary supplements.” This mandate conflicts directly with the FDA’s position that CBD products are excluded from the definition of a dietary supplement. Further, despite the state’s categorization of CBD products as dietary supplements, New York prohibits the addition of CBD to food and beverages. These regulations have resulted in a confusing landscape for retailers and manufacturers in the Empire State.

Several states also have labeling requirements specific to CBD products. Batch numbers and ingredients are ubiquitous, but an increasingly common requirement is the inclusion of a scannable code that links to specific information about the product. States imposing this requirement include Florida, Indiana, Texas, and Utah. Indiana is viewed as having one of the more comprehensive labeling requirements for CBD products – or, depending upon your perspective, the most onerous.

NCIA to DEA: Rescind the Interim Hemp Rule

By Cannabis Industry Journal Staff
No Comments

In a press release published this week, the National Cannabis Industry Association (NCIA) urges the DEA to rescind the controversial Interim Hemp Rule. Back in August, the DEA published the rule and it has received widespread criticism for its language in conflict with the 2018 Farm Bill.

The rule is a classic example of the federal agency’s resistance to cannabis reform. It states that legal hemp products can be converted to products containing more than 0.3% THC, the threshold established in the 2018 Farm Bill, thus becoming an illegal controlled substance.

Under the Interim Hemp Rule, the DEA could arrest and prosecute legal hemp processors if they are in possession of hemp or CBD oil that contains more than 0.3% THC at any time, even if only for a temporary moment in the extraction process. This creates a lot of criminal risk for hemp companies as it is an almost inevitable step in the extraction process.

Almost every state in the country has an established USDA-compliant hemp program and the NCIA believes the Interim Hemp Rule is in direct conflict with the USDA’s rulemaking authority. According to Aaron Smith, co-founder and chief executive officer of the NCIA, the DEA is overstepping its authority and going outside of its jurisdiction. “Given this agency’s history of doing everything in its power to maintain the criminalization of cannabis in any form, this rule was clearly not proposed to help the thousands of small farmers who are participating in approved hemp programs and could put them in unnecessary danger,” says Smith. “Failure to rescind it immediately is a clear violation of congressional intent and established law.”

You can view the NCIA’s full comments here.

The UK Cannabis Industry Needs New PR Strategies

By Kajal Shah
No Comments

The cannabis marketplace is an ever changing one. The opportunities being generated in the UK space are immense. Yet despite the countless benefits cannabis can bring to the economy, patient care and supporting health and wellness for consumers, an image problem continues to persist.

Despite its expansive growth, there is still a lot of uncertainty and misinformation. Having worked with several cannabis businesses in recent years, I firmly believe there are a myriad of ways in which the industry can benefit from PR support. A strong PR strategy can not only drive media coverage, but help to reach customers, shorten sale cycles, bolster brand reputation and drive change within political and regulatory circles.

Whether you are a flourishing cannabis brand, a start-up or ancillary cannabis business, PR can help you stand out from the competition and become a credible voice in this competitive market.

Here are some key ways in which cannabis businesses can profit from PR:

Campaigning for progress

Each category of the cannabis sector faces its own reputational challenges. Medical cannabis is perhaps the most significant of these, yet it still goes largely misunderstood by the general public. This, along with regulatory restrictions and a lack of education in the clinical community means cannabis stigma continues to exist.

For the thousands of patients suffering with the likes of multiple sclerosis and epilepsy, still struggling to access this fully legal drug, this is a tragic, pressing issue. There are several families and individuals across the UK who campaign for medical cannabis access to be improved, by leveraging their story via the press and lobbying Parliament. Some of these high-profile families have been supported through strategic communications at The PHA Group, most notably Hannah Deacon, the mother who successfully campaigned for the first NHS cannabis license for her son, as well as the parents of toddler Charlie Hughes, who are currently seeking Judicial Review against NICE.

Both cases offer strong proof of the powerful role PR can play in supporting those in need of medical cannabis. Through speaking to media and generating coverage of the stories of both families, the complex issue of medical cannabis access has been thrust into the public eye, this in turn putting fresh pressure on the Government to address this through much-needed change. For cannabis leaders and professionals looking to invest in PR, it is critical that your PR partner understands the key issues, culture and complexities of the industry to create credible stories and campaigns to gain cut through in the media.

Reputation enhancement

CBD is the most established sector of the UK cannabis industry, having become firmly attached to the lifestyle scene in recent years with its broad spectrum of health and wellness products. With approximately 7.3 million people in the UK using CBD products each year through a market already worth an estimated £300 million, the industry is predicted to grow at a rapid rate, with experts claiming this figure will more than triple in the next five years.

Just some of the many hemp-derived CBD products on the market today.

Despite its impressive growth, the industry has faced its own stumbling blocks. Until this year, CBD had been in a period of regulatory uncertainty and the industry faced understandable criticism when high profile cannabis probes found over half of the most popular CBD oils did not contain the amount of CBD promised on the label. This did nothing to help the already precarious public perception of CBD in the UK, meaning firms have had to work extremely hard to heal their reputations and ensure their brands are deemed trustworthy by consumers going forward.

With hundreds of brands claiming to be the best option, establishing credibility and becoming a trusted voice is key. Educating your audience by positioning company experts will help to keep your audience up to speed on the most current information and allow your brand to achieve an authoritative voice within the cannabis space.

Amplifying awareness 

Driving awareness drives revenue. It doesn’t matter if your story and products are revolutionary if nobody knows they exist! PR can help build a narrative which conveys the purpose of your business, along with its vision and products, whilst promoting key insights to keep your company relevant. The power of public relations in this regard is very similar to that of positive word-of-mouth.

Strategic brand building

UKflagCannabis companies can’t advertise like mainstream companies, so they must tread carefully in the marketing of their products. However, there are great possibilities within PR. Through case studies and careful product placement, PRs can work carefully with CBD companies to raise awareness of the benefits of their products and solidify their brand image, without risking trouble with the ASA. With CBD brands and manufacturers springing up left and right, there are opportunities aplenty for PR firms to lend support, whether that’s from a consumer perspective, across food and drink, beauty or general wellness, or from a strategic business view.

Stories sell. It’s vital for a brand that wants to develop a sustainable, long-term plan to build a story which resonates with its audience. Strategic PR can therefore increase brand value and coupled with a digital marketing and social media strategy, boost engagement and elevate the profile of the business.

A wealth of opportunities

The legal cannabis industry is gaining traction and is one to watch. In relation to medical cannabis, the industry has called for change to improve patient access and pressure has been exerted on the government and regulatory bodies to normalise cannabis as an effective treatment for a myriad of health conditions In parallel, the CBD sector is only set to grow and in recent years, there has been increasing interest and investment into hemp, a versatile variety of the cannabis plant hailed as the next big thing in sustainability.

Cannabis is a commonplace yet spectacularly complex plant. It therefore needs a PR strategy which can uncover key angles and opportunities across a multitude of avenues to position brands within the space for success and growth.

Whilst there is still much to learn and navigate in cannabis, PR has an important role to play in changing attitudes as the industry continues to expand and evolve. I am excited to see where it goes next.