Tag Archives: cannabidiol

Epidiolex-GW

GW Pharma’s Epidiolex Gets Encouraging FDA Assessment

By Aaron G. Biros
No Comments
Epidiolex-GW

According to a press release, last week GW Pharmaceuticals’ drug Epidiolex received a positive FDA panel review, which is an encouraging and important step towards getting the drug approved by the U.S. Food and Drug Administration and on the market in the United States. Epidiolex is an anti-epilepsy drug, taken in a syrup form, with the main active ingredient being cannabidiol (CBD), and less than 0.1 % THC.

GW logo-2The drug is targeted to treat Dravet syndrome (DS) and Lennox-Gastaut syndrome (LGS) a rare early-onset type of epilepsy found in children, according to Reuters. FDA staff said the drug “reduces seizure frequency in patients with drug-resistant LGS or DS while maintaining a predictable and manageable safety profile.”

GW Pharmaceuticals, founded in 1998 and based in London, is a biopharmaceutical company that has made headlines previously for developing cannabis-derived drugs. Sativex, one of the first drugs they developed, is derived from cannabis, but was not approved by the FDA. It is however available in other parts of the world, such as the EU, Israel and Canada.

Epidiolex-GWIf Epidiolex actually gets approval by the FDA, it will be the first-ever cannabis-derived drug available via prescription in all of the United States. According to Justin Gover, chief executive officer of GW Pharmaceuticals, this is a momentous breakthrough for the company. “We are pleased by the Advisory Committee’s unanimous recommendation to approve Epidiolex, which would provide an important treatment option for patients with LGS and Dravet syndrome, two of the most severe and treatment-resistant forms of epilepsy,” says Gover “This favorable outcome marks an important milestone in our company’s unwavering commitment to address the significant unmet need for patients with LGS and Dravet syndrome and our resolve to study Epidiolex under the highest research and manufacturing standards. We look forward to our ongoing discussions with the FDA as it continues to review the Epidiolex NDA.”

According to the GW press release, the Peripheral and Central Nervous System Drugs Advisory Committee of the FDA unanimously recommended supporting the approval of the New Drug Application (NDA) for the drug. That advisory committee is sort of like an independent panel; their unanimous vote doesn’t necessarily mean the drug will get approved, but the FDA takes their decision into consideration when approving new drugs. So this panel recommendation is certainly a good sign and shows this drug could potentially be on the path to FDA approval.

A More Effective and Efficient Approach to Purer Cannabidiol Production Using Centrifugal Partition Chromatography

By Lauren Pahnke
3 Comments

Many physicians today treat their patients with cannabidiol (CBD, Figure 1), a cannabinoid found in cannabis. CBD is more efficacious over traditional medications, and unlike delta-9 tetrahydrocannbinol (THC), the main psychoactive compound in cannabis, CBD has no psychoactive effects. Researchers have found CBD to be an effective treatment for conditions such as cancer pain, spasticity in multiple sclerosis, and Dravet Syndrome, a form of epilepsy.

CBD is still considered an unsafe drug under federal law, but to meet the medical demand, 17 states in the US recently passed laws allowing individuals to consume CBD for medical purposes. A recent survey found that half of medicinal CBD users rely on the substance by itself for treatment. As doctors start using CBD to treat more patients, the demand for CBD is only expected to rise, and meeting that demand can pose challenges for manufacturers who are not used to producing such high quantities of CBD. Furthermore, as CBD-based drugs become more popular, the US Food and Drug Administration (FDA) will likely require manufacturers to demonstrate they can produce pure, high-quality products.

cannabidiol
Figure 1. The structure of cannabidiol, one of 400 active compounds found in cannabis.

Most manufacturers use chromatography techniques such as high performance liquid chromatography (HPLC) or flash chromatography to isolate compounds from natural product extracts. While these methods are effective for other applications, they are not, however, ideal for CBD isolate production. Crude cannabis oil contains some 400 potentially active compounds and requires pre-treatment prior to traditional chromatography purification. Both HPLC and flash chromatography also require silica resin, an expensive consumable that must be replaced once it is contaminated due to irreversible absorption of compounds from the cannabis extract. All of these factors limit the production capacity for CBD manufacturers.

Additionally, these chromatography methods use large quantities of solvents to elute natural compounds, which negatively impacts the environment.

A Superior Chromatography Method

Centrifugal partition chromatography (CPC) is an alternative chromatography method that can help commercial CBD manufacturers produce greater quantities of pure CBD more quickly and cleanly, using fewer materials and generating less toxic waste. CPC is a highly scalable CBD production process that is environmentally and economically sustainable.

The mechanics of a CPC run are analogous to the mechanics of a standard elution using a traditional chromatography column. While HPLC, for instance, involves eluting cannabis oil through a resin-packed chromatography column, CPC instead elutes the oil through a series of cells embedded into a stack of rotating disks. These cells contain a liquid stationary phase composed of a commonly used fluid such as water, methanol, or heptane, which is held in place by a centrifugal force. A liquid mobile phase migrates from cell to cell as the stacked disks spin. Compounds with greater affinity to the mobile phase are not retained by the stationary phase and pass through the column faster, whereas compounds with a greater affinity to the stationary phase are retained and pass through the column slower, thereby distributing themselves in separate cells (Figure 2).

Figure 2- CPC
Figure 2. How CPC isolates compounds from complex, natural mixtures. As the column spins, the mobile phase (yellow) moves through each cell in series. The compounds in the mobile phase (A, B, and C) diffuse into the stationary phase (blue) at different rates according to their relative affinities for the two phases.

A chemist can choose a biphasic solvent system that will optimize the separation of a target compound such as CBD to extract relatively pure CBD from a cannabis extract in one step. In one small-scale study, researchers injected five grams of crude cannabis oil low in CBD content into a CPC system and obtained 205 milligrams of over 95% pure CBD in 10 minutes.

Using a liquid stationary phase instead of silica imbues CPC with several time and cost benefits. Because natural products such as raw cannabis extract adhere to silica, traditional chromatography columns must be replaced every few weeks. On the other hand, a chemist can simply rinse out the columns in CPC and reuse them. Also, unlike silica columns, liquid solvents such as heptane used in CPC methods can be distilled with a rotary evaporator and recycled, reducing costs.

Environmental Advantages of CPC

The solvents used in chromatography, such as methanol and acetonitrile, are toxic to both humans and the environment. Many environmentally-conscious companies have attempted to replace these toxic solvents with greener alternatives, but these may come with drawbacks. The standard, toxic solvents are so common because they are integral for optimizing purity. Replacing a solvent with an alternative could, therefore, diminish purity and yield. Consequently, a chemist may need to perform additional steps to achieve the same quality and quantity achievable with a toxic solvent. This produces more waste, offsetting the original intent of using the green solvent.

CPC uses the same solvents as traditional chromatography, but it uses them in smaller quantities. Furthermore, as previously mentioned, these solvents can be reused. Hence, the method is effective, more environmentally-friendly, andeconomically feasible.

CPC’s Value in CBD Production

As manufacturers seek to produce larger quantities of pure CBD to meet the demand of patients and physicians, they will need to integrate CPC into their purification workflows. Since CPC produces a relativelyduct on a larger scale, it is equipped to handle the high-volume needs of a large manufacturer. Additionally, because it extracts more CBD from a given volume of raw cannabis extract, and does not use costly silica or require multiple replacement columns, CPC also makes the process of industrial-scale CBD production economically sustainable. Since it also uses significantly less solvent than traditional chromatography, CPC makes it financially feasible to make the process of producing CBD more environmentally-friendly.

Suggested Reading:

CPC 250: Purification of Cannabidiol from Cannabis sativa

Introduction to Centrifugal Partition Chromatography

Iowa’s Medical CBD Program Gets Tracking System

By Aaron G. Biros
No Comments

BioMauris, LLC became the 5th company in the United States to win a state contract for a seed-to-sale platform today. BioMauris is a technology company that manages product tracking, fulfillment and distribution with a focus on the healthcare market. According to a press release, the company announced today that the state of Iowa selected BioMauris to manage their tracking system for the medical cannabidiol (CBD) program.

That program’s contract includes inventory tracking, medical cannabidiol sales and patient and caregiver registration. In 2014, Iowa’s Medical Cannabidiol Act was signed into law. Three years later, in May of 2017, Governor Terry Branstad expanded the state’s program, including manufacture and dispensing in the previous legislation. On December 1st, 2018, Iowa expects sales to begin and fully implement the program.

This is BioMauris’ first state contract in the cannabis industry. According to the press release, BioMauris bases their platform on Salesforce for point of sale, tracking, customer loyalty and distribution services in the healthcare sector. The company says they use Salesforce because it is extremely customizable and secure.

Erik Emerson
Erik Emerson, founder and president of Biomauris

According to Erik Emerson, founder and president of BioMauris, they’re poised to deliver on this front, given their experience in other industries. “Our team has extensive history in the pharmaceutical business, and therefore has a unique appreciation for data integrity and security,” says Emerson. “Additionally, we fundamentally believe the opportunity to track patient progress and associate the benefits received with the products used, is an incredible opportunity for the cannabis industry.” BioMauris has worked with clients on similar projects in the healthcare space for some time.

The company touts their platform as fully PCI-DSS and HIPAA compliant, allowing them to process payments and protect sensitive patient information. “Our patented technology, makes this not only possible, but simple for all users,” says Emerson. “We are excited to bring our product to the great state of Iowa and look forward to a long partnership with them. We believe strongly in what Iowa is attempting to do with their program and believe it is a perfect fit with our strategy for the cannabis industry.”

FDAlogo

FDA Issues Warning To CBD Companies

By Aaron G. Biros
No Comments
FDAlogo

On November 1st, the U.S. Food and Drug Administration (FDA) published a press release addressing warning letters issued to four companies. The warning letters, sent to companies marketing cannabidiol (CBD) products with therapeutic claims, cites unsubstantiated claims about their products’ ability to treat or cure cancer and other diseases.

A snippet of the warning letter issued to Greenroads

According to the press release, the four companies that received warning letters are Greenroads Health, Natural Alchemist, That’s Natural! Marketing and Consulting, and Stanley Brothers Social Enterprises LLC. The press release called their marketing campaigns “deceptive” for “unproven treatments.” Here is the letter they sent to Greenroads Health.

“As part of the U.S. Food and Drug Administration’s ongoing efforts to protect consumers from health fraud, the agency today issued warning letters to four companies illegally selling products online that claim to prevent, diagnose, treat, or cure cancer without evidence to support these outcomes,” reads the FDA statement. “Selling these unapproved products with unsubstantiated therapeutic claims is not only a violation of the Federal Food, Drug and Cosmetic Act, but also can put patients at risk as these products have not been proven to be safe or effective.”

According to the press release, the FDA has issued ninety warning letters in the past ten years, with around twelve this year, to companies making fraudulent claims about cancer therapies. Here are some examples of claims made by companies that the FDA took issue with:

  • “Combats tumor and cancer cells;”
  • “CBD makes cancer cells commit ‘suicide’ without killing other cells;”
  • “CBD … [has] anti-proliferative properties that inhibit cell division and growth in certain types of cancer, not allowing the tumor to grow;” and
  • “Non-psychoactive cannabinoids like CBD (cannabidiol) may be effective in treating tumors from cancer – including breast cancer.”

“Substances that contain components of marijuana will be treated like any other products that make unproven claims to shrink cancer tumors,” says FDA Commissioner Scott Gottlieb, M.D. “We don’t let companies market products that deliberately prey on sick people with baseless claims that their substance can shrink or cure cancer and we’re not going to look the other way on enforcing these principles when it comes to marijuana-containing products. There are a growing number of effective therapies for many cancers. When people are allowed to illegally market agents that deliver no established benefit they may steer patients away from products that have proven, anti-tumor effects that could extend lives.”

 

Cannabis-Infused Beer Goes Mainstream

By Aaron G. Biros
No Comments

Lagunitas Brewing today unveiled a new beer infused with cannabis, making it the first large national brewery to experiment with cannabis. Lagunitas, now owned by Heineken, announced the launch of their “Supercritical Ale,” an IPA brewed with terpenes extracted from cannabis.

The brewery chose to partner with AbsoluteXtracts and CannaCraft, based in California, for their cannabis extract and will use hops from Yakima, Washington. “We’ve long known about the close connection between cannabis and hops,” reads their website. “Now Lagunitas is excited to partner with a like-minded neighbor in Sonoma County, AbsoluteXtracts, to close the gap further with tandem innovations on the topic.” Hops and cannabis belong in the same taxonomic family, Cannabinaceae, and they also have a number of physical similarities, which helps explain the “close connection” they are referring to. The website says the beer will only be available in California—for now. According to Fortune Magazine, the terpenes come from two strains, Blue Dream and Girl Scout Cookies (known as GSC in some states).

The name “Supercritical” comes from the state that carbon dioxide is best used as a solvent for extracting compounds from plants. Terpenes are responsible for the aromatic properties of plants, giving hops the piney and citrusy flavors that come in IPAs, and giving cannabis the same flavors and smells as well. Limonene, for example, is a cyclic terpene molecule that gives us a citrusy smell and flavor.

Coalition brewing Co.’s Two Flowers IPA

They’re not the first brewery to experiment with cannabis-infused beer; smaller craft breweries have been doing it for some time now. Coalition Brewing Co., based in Portland, Oregon, sells a cannabis-infused beer called Two Flowers IPA, with 3mg of cannabidiol (CBD) in a 12oz glass. Dad and Dudes Breweria, based in Aurora, Colorado, also put out a CBD-infused beer last year, called General Washington’s Secret Stash. According to Westword, Dad and Dudes was the first brewery to receive federal approval for a CBD-infused beer, but since the DEA declared cannabis oil illegal last winter, the Alcohol and Tobacco Tax and Trade Bureau rescinded their approval.

The common denominator between these three beers is that none of them contain THC, the popular psychoactive ingredient in cannabis. Perhaps Lagunitas is taking a safer approach with regard to federal legality by only using terpenes, not CBD, and only offering it in state. Coalition’s Two Flowers IPA is also only available in Oregon, but does, however, contain CBD. Check out the video on Lagunitas’ Supercritical Ale below.

The Practical Chemist

Potency Analysis of Cannabis and Derivative Products: Part 2

By Rebecca Stevens
3 Comments

As mentioned in Part 1, the physiological effects of cannabis are mediated by a group of structurally related organic compounds known as cannabinoids. The cannabinoids are biosynthetically produced by a growing cannabis plant and Figure 1 details the biosynthetic pathways leading to some of the most important cannabinoids in plant material.

Potency figure 1
Figure 1: The biosynthetic pathway of phytocannabinoid production in cannabis has been deeply studied through isotopic labeling experiments

The analytical measurement of cannabinoids is important to ensure the safety and quality of cannabis as well as its extracts and edible formulations. Total cannabinoid levels can vary significantly between different cultivars and batches, from about 5% up to 20% or more by dry weight. Information on cannabinoid profiles can be used to tailor cultivars for specific effects and allows end users to select an appropriate dose.

Routine Analysis vs. Cannabinomics 

Several structurally analogous groups of cannabinoids exist. In total, structures have been assigned for more than 70 unique phytocannabinoids as of 2005 and the burgeoning field of cannabinomics seeks to comprehensively measure these compounds.¹

Considering practical potency analysis, the vast majority of cannabinoid content is accounted for by 10-12 compounds. These include Δ9-tetrahydrocannabinol (THC), cannabidiol (CBD), cannabigerol (CBG), Δ9-tetrahydrocannabivarian (THCV), cannabidivarin (CBDV) and their respective carboxylic acid forms. The cannabinoids occur primarily as carboxylic acids in plant material. Decarboxylation occurs when heat is applied through smoking, vaporization or cooking thereby producing neutral cannabinoids which are more physiologically active.

Potency Analysis by HPLC and GC

Currently, HPLC and GC are the two most commonly used techniques for potency analysis. In the case of GC, the heat used to vaporize the injected sample causes decarboxylation of the native cannabinoid acids. Derivatization of the acids may help reduce decarboxylation but overall this adds another layer of complexity to the analysis² ³. HPLC is the method of choice for direct analysis of cannabinoid profiles and this technique will be discussed further.

A sample preparation method consisting of grinding/homogenization and alcohol extraction is commonly used for cannabis flower and extracts. It has been shown to provide good recovery and precision² ³. An aliquot of the resulting extract can then be diluted with an HPLC compatible solvent such as 25% water / 75% acetonitrile with 0.1% formic acid. The cannabinoids are not particularly water soluble and can precipitate if the aqueous percentage is too high.

To avoid peak distortion and shifting retention times the diluent and initial mobile phase composition should be reasonably well matched. Another approach is to make a smaller injection (1-2 µL) of a more dissimilar solvent. The addition of formic acid or ammonium formate buffer acidifies the mobile phase and keeps the cannabinoid acids protonated.

The protonated acids are neutral and thus well retained on a C18 type column, even at higher (~50% or greater) concentrations of organic solvent² ³.

Detection is most often done using UV absorbance. Two main types of UV detectors are available for HPLC, single wavelength and diode array. A diode array detector (DAD) measures absorbance across a range of wavelengths producing a spectrum at each point in a chromatogram while single wavelength detectors only monitor absorbance at a single user selected wavelength. The DAD is more expensive, but very useful for detecting coelutions and interferences.

References

  1. Chemical Constituents of Marijuana: The Complex Mixture of Natural Cannabinoids. Life Sciences, 78, (2005), pp. 539
  2. Development and Validation of a Reliable and Robust Method for the Analysis of Cannabinoids and Terpenes in Cannabis. Journal of AOAC International, 98, (2015), pp. 1503
  3. Innovative Development and Validation of an HPLC/DAD Method for the Qualitative and Quantitative Determination of Major Cannabinoids in Cannabis Plant Material. Journal of Chromatography B, 877, (2009), pp. 4115

Rebecca is an Applications Scientist at Restek Corporation and is eager to field any questions or comments on cannabis analysis, she can be reached by e-mail, rebecca.stevens@restek.com or by phone at 814-353-1300 (ext. 2154)

Hemp-Derived CBD Oil: Maintaining Quality in the Manufacturing Process

By Aaron G. Biros
3 Comments

Hemp-derived cannabidiol (CBD) products are quickly becoming a burgeoning industry. Consumers can purchase the products in all fifty states and can receive the therapeutic effects of certain cannabinoids without any psychoactivity. Commonly used to help treat inflammation, pain, seizures and anxiety, CBD comprises a sizable portion of the cannabis market that patients and consumers are flocking to.

Founded by Paul Benhaim in 2013, Colorado-based Elixinol is reaching this market with a line of hemp-derived CBD oils and capsules. The company has grown rapidly and now has agreements with exclusive distributors in Japan, Puerto Rico, The United Kingdom and South Africa.

Paul Benhaim founded Elixinol in 2013
Paul Benhaim founded Elixinol in 2013

According to Chris Husong, sales and marketing director at Elixinol, achieving superior quality is central to the company’s growth strategy. “We are thinking about the long-term play here,” says Husong. Achieving the highest quality possible starts with sourcing from industrial hemp farms in Northern Europe, according to Husong. Through good manufacturing practices (GMPs), the company pays close attention to every detail involved in producing the hemp-derived CBD oil.

Safety and transparency are two core tenants in the company’s goal to strive for quality products. “We use third-party independent labs for our testing including one in Northern Europe where we source from in addition to Proverde Labs when it reaches us in Colorado,” says Husong. They test their products for over 300 chemicals (including pesticides, residual solvents and heavy metals) as well as for microbiological contamination and a unique terpene profile using GC-MS/GC-FID.

Co-founder Paul Benhaim at their extraction and testing facility in Europe.
Co-founder Paul Benhaim at their extraction and testing facility in Europe.

In addition to stringent manufacturing safety procedures and testing, tracking is a huge part of meeting quality standards. Each product batch also has a lot number. While batch numbers are a requirement in GMPs, lot numbers mean that they are well equipped in the event of a product recall. After the product is packaged, they perform additional spot-checks periodically.

Contract manufacturing and white-labeling products is a large part of their business, so the company needs to meet rigorous quality standards for their partners as well. “We provide our oil to a variety of associates, but we are always looking for new partners on the cutting edge, innovating with new products that we can help with,” says Husong. Very often, this means doing a full plant extraction for different uses. Utilizing a full-spectrum plant extraction helps maintain a well-balanced cannabinoid profile with many of the original terpenes found in the plant.

Japan's first lady, Akie Abe, purchasing Elixinol's hemp-derived CBD oil.
Akie Abe, first lady of Japan, purchasing Elixinol’s hemp-derived CBD oil.

What makes their product so appealing to consumers is not just the quality, but also the method of delivery into the bloodstream and very precise dosing. “Our liposome products have a relatively new technology that allows the oil to be absorbed into your system via fatty acids, which lets you absorb the compounds much faster, requiring less of it and more consistency,” adds Husong. In addition to their fast-acting delivery mechanism, they produce capsules dosed to precisely fifteen milligrams and a delivery system they call ‘Xpen,’ which draws the oil in an oral applicator to a precise dose of fifteen milligrams every time.

After the manufacturing process, the company pays close attention to detail in their packaging and distribution. “The packaging is built to maintain that quality in the manufacturing process and to extend the shelf life of our products,” says Husong. The technology that goes into their packaging involves using Miron Violet glass, which is anti-fungal and prevents external light from deteriorating the oil inside.

This growing sector in the cannabis market is representative of a greater trend: the commodification of hemp and cannabis. When businesses like Elixinol scale up production of goods such as CBD oil, a lens focused on consistency and quality can not only improve business operations but also raise the standard across the entire industry.

Marijuana Matters

Let’s Talk CBD

By David C. Kotler, Esq.
2 Comments

Let’s talk about cannabidiol, CBD, a non-psychoactive component of cannabis. Let’s not talk about CBD from the whole plant. This is a conversation about the proliferation of hemp-based CBD marketed everywhere from gas stations to specialty health and wellness stores. Heck, “its legal in all 50 states”, right?

On the Federal Level, pursuant to Title 21 USC 802 Section (16) The term “marijuana” means all parts of the plant cannabis sativa L., whether growing or not; the seeds thereof; the resin extracted from any part of such plant; and every compound, manufacture, salt, derivative, mixture, or preparation of such plant, its seeds or resin. The term does not include the mature stalks of such plant, fiber produced from such stalks, oil or cake made from the seeds of such plant, any other compound, manufacture, salt, derivative, mixture, or preparation of such mature stalks (except the resin extracted therefrom), fiber, oil, or cake, or the sterilized seed of such plant which is incapable of germination.

Proponents of the position that hemp-derived CBD is legal point to the lack of a specific definition under the above description (often asserting that their oil is not processed from the flower) and the Ninth Circuit’s opinion in Hemp Indus. Ass’n v DEA, 333 F.3d 1082 (9th Cir. 2003). They buttress their belief by citing the DEA’s clarification of hemp in the Federal Register released in October 2001 and the 2013 Farm Bills’ adoption of the following definition of industrial hemp (adopted from plant scientists research in the 70’s: “The term ‘industrial hemp’ means the plant, cannabis sativa L. and any part of such plant, whether growing or not, with a delta-9 tetrahydrocannabinol H. R. 2642—265 concentration of not more than 0.3 percent on a dry weight basis.” Much of the foregoing has been extended to even support opinions that hemp-derived CBD from domestic sources under the 2013 Farm Bill is legal for distribution nationwide.

Opponents of the hemp-derived CBD is legal argument (putting aside the issues with imported hemp and contaminants, etc.) point to the exception in the definition of “marijuana” i.e. to actually get a workable form of CBD from hemp, the preparation of the stalk puts you into the resin category which is excepted from the terms that are specifically not included in “marijuana.” In regard to HIA v. DEA cited above, opponents posit that the court decision, never mentions CBD, and the HIA maintain that this ruling did not legalize CBD.

In February 2015 and again in February 2016 the FDA issued warning letters to CBD companies. The overall context of the letters dealt with mislabeling and improper claims in addition to the most recent round of letters addressing CBD products’ exclusion from the dietary supplement definition under the FD&C act and how that is affected by CBD’s consideration as a new drug in one or more new drug applications. What has not been addressed or asserted by the FDA is the legal status of CBD under the Controlled Substances Act.

Although I have seen many commentators and attorneys opine on the legality as the case may be of hemp-derived CBD and its ability to be shipped to and sold in all 50 states (often with a caveat that readers should consult them for further advice), I have never seen the issue addressed from a practitioner that deals with the United States Patent and Trademark Office. I am not that practitioner. However, I do represent a company that has recently made application. I, not being a trademark attorney, but being sensitive to the federal government’s position collectively on CBD, found the examiner’s questions in her Office Action Letter surrounding CBD to be quite interesting. They were as follows:

  1. Do applicant’s identified goods contain marijuana, marijuana based preparations, or marijuana extracts or derivatives, synthetic marijuana, or any other illegal controlled substances?
  2. If the applicant’s goods contain Cannabidiol (CBD), is this derived from marijuana or from industrial hemp?
  3. Are the applicant’s goods lawful pursuant to the Controlled Substances Act?

I searched for another application and Office Action Letter from 2016 for another CBD product (both were vaporizer products rather than the lotions, balms, etc. that have been the subject of other applications). The questions to that applicant mirrored those above.

What I take from the questions that trademark examiners are asking is that perhaps the debate raging in academic and legal circles is for naught. It looks like at least the USPTO has resigned itself to there being a difference between cannabis or whole plant and hemp-based CBD in terms of definition and proscription under the federal controlled substances act.

So we have come full circle in my question, ‘Is it legal in all fifty states?’ If you answer yes to that question then please provide me the definition of marijuana/cannabis from the Controlled Substance Act from each of the fifty states individually and a copy of the documentation from a source showing how the industrial hemp was grown and processed and verifiable lab reports of the particular product’s contents.

jMackaypic
BEST Extractions

Defining BEST Extraction

By John A. Mackay, Ph. D.
No Comments
jMackaypic

Over the next few months, I would like to walk through a series of articles to cover the number of ways to extract potentially pharmaceutically active compounds from cannabis plants. However, in the first article I would like to review concerns being addressed in state regulations: contamination in concentrates with pesticides, mycotoxins, and residual solvents. The next article will cover the most common extraction with two different modes: CO2 versus hydrocarbons.

Currently, there is a lot of focus on the cannabis strain of hemp. This is defined as having less than 0.3% of THC, (the psychoactive compound). To be clear, the science of extraction is eons old, but the current revitalization is due to new scientific inquiry regarding the applications of the cannabis plant.

I am often asked, “What is the ‘best’ extraction for a natural product?” The BEST extraction? The key to this answer is that you must assume unintended consequences until you can prove that they are at least minimized compared to the intended consequences.

I have a suggestion for you to consider and I look forward to your response to it. I also assume the right to adapt and revise it.

Botanical integrity from seed to shelf

Efficacy of the process beyond efficiency, economics, effectiveness

Safety of people and product

Testing for confirmation at each step of process

The hemp industry has changed significantly over the past few years. Just casually flipping through the channels on television, reading a newspaper or magazine, (on any topic – news, business, sports, food and science) and there is some facet of hemp’s value being examined. The reduction of traditional pulmonary intake (smoking) in the legal marketplace can be tracked by sales of these products in the states where it is legal. The balance of ingestion is drastically tipping toward what might still be considered smoking with vaporizer products as well as toward edible consumables. The ingredients in these products come not from just adding the plant to the formulation, but rather a concentrated mixture. This is the difference between adding a raw vanilla and a teaspoon of vanilla extract. The compound getting the most coverage is cannabidiol (CBD), which is the compound derived from cannabidiolic acid (CBDA). The effects of the other compounds in the plant are being studied as well.

Unintended consequences from the concentration – extraction – are something we need to consider seriously as consumers. The labeled use of “natural” is one that is critical, but can be totally nullified by the unintended contamination in the extraction workflow. Years of making sure the hemp adheres to strict growing environment can be destroyed in seconds with the addition of polycyclic aromatic hydrocarbons (PAH’s) by the use of solvent that has these toxic chemicals in them. These come not through intended consequences, but not knowing the stabilizers and other additives in material being added to these previously pure plants.

What if I pour sour milk on a natural granola for breakfast? What if I use water with high lead or contaminated water to pour over natural coffee grind? Not a great way to start the day, but it is no different than using the most premium hemp and unknowingly adding low grade solvents or adding components from cleaning the surfaces of instruments that come in contact with hemp.

Note that, by definition, we are concentrating the material from the hemp plant. From 4,000 grams, we are getting 400 grams of CBDA if it is 10% by weight (and later converted to CBD). That compound is 10 times more concentrated in a solution. What other compounds are now also 10 times or 5 times or 100 times more concentrated? Maybe no “bad” ones, but how do you know that something else is not also in the mixture?

figure1 extract
Figure 1. With each step of concentration of the green balls, so it could be with other components in the mixture.

This is illustrated in the filtering of green balls in Figure 1. As the green balls become a greater and greater percentage of the solution, it is possible that other compounds like pesticides are also increasing in percentage of the extraction solution. The solution is more concentrated and “simpler” versus all of the other things in the original mixture.

The simple answer is in the testing of the components. The labeling of major compounds is only the beginning of what is on the label that you read. Heavy metals? PAH’s? Residual solvents? Pesticides? Molds? And a long list of other material that could come into the process after the plant left its pristine organic farm. Many studies can be read about slip agents in bags, contamination from workers in the workflow, and other sources of inconsistency.

There are a significant number of companies that I have seen that take this very seriously. New companies are being formed that have safety of product at the top of the list of importance. They are building facilities that are sterile and putting standard operating procedures in place that continually test the product along every step to ensure that they are in compliance.

ecxtractionfig2
Figure 2. Science and economics merge when considering all the possible uses of concentrated compounds to final product formulations

Supercritical fluid extraction is GRAS (generally regarded as safe). It is, only as long as the solvent specifications are known, the vendor meets those standards, and the instrument surfaces meet any necessary standards.

Supercritical carbon dioxide is used to clean surfaces of electronics and bones for skin grafts. It is used for the decaffeination of coffee as well as pulling trace amounts of pesticides from soil. It is used to extract antioxidants from krill and the active ingredients from algae as well as oil from core samples deep below the earth. It also extracts the terpenes and CBDA from hemp – as well as possibly anything that has been added to it.

The key take away from this article is to know the BEST extraction.

Botanical integrity from seed to shelf

Efficacy of the process beyond efficiency, economics, effectiveness

Safety of people and product

Testing for confirmation

Taking each of these into consideration will bring the best results for concentrations of hemp products. I hope you can extract the best from your day.