Since the beginning of this year, more than 8,100 wildfires have burned in California, torching a record 3.7 million acres of land in a state with one of the largest cannabis economies in the world. With the effects of climate change continuing to wreak havoc on the entire West Coast, smoke from those fires has spread across much of the country throughout the summer.
As we approach October, colloquially referred to as Croptober in the outdoor cannabis market for the harvest season, we’re seeing the August Complex Fire creep towards the Emerald Triangle, an area in northern California and southern Oregon known for its ideal cannabis growing conditions and thousands of cultivators. The wildfires are close to engulfing towns like Post Mountain and Trinity Pines, which are home to a large number of cannabis cultivators.
Hezekiah Allen, executive director of the California Growers Association, says losses could reach hundreds of millions of dollars. Fires across Oregon have torched dozens of cultivation operations, with business owners losing everything they had. The Glass Fire has already affected a large number of growers in Sonoma and Napa Counties and is 0% contained. None of these cultivators have crop insurance and many of them have no insurance at all.
The impact from all of these fires on the entire cannabis supply chain is something that takes time to bear witness; a batch of harvested flower typically takes months to make its way down the entire supply chain following post-harvest drying and curing, testing and further processing into concentrates or infused products.
Image: Heidi De Vries, Flickr
The fires affect everyone in the supply chain differently, some much more than others. Sweet Creek Farms, located in Sonoma County, lost all but one fifth of their crops to fires. Other cultivators further south of the Bay Area have lost thousands of plants tainted by smoke.
Harry Kazazian, CEO of 22Red, a cannabis brand distributed throughout California, Nevada and Arizona, says he is increasing their indoor capacity to make up for any outdoor flower loss. But he said it has not impacted his business significantly. “Wildfires have been a part of California and many businesses have adapted to dealing with them,” says Kazazian. He went on to add that most of his flower comes from indoor grows in the southern part of the state, so he doesn’t expect it to impact too much of his supply chain. Kazazian is right that this is not a new concept – the cannabis industry on the West Coast has been dealing with wildfires for years.
George Sadler, President of Platinum Vape
George Sadler, President of Platinum Vape, has a similar story to tell – the fires have impacted his supply chain only slightly, saying they had a handful of flower orders delayed or cancelled, but it’s still business as usual. “It’s possible this won’t affect the supply chain until later in the fall,” says Sadler. “There has definitely been an effect on crops that are being harvested now. It may end up driving the price of flower up, but we won’t really know that until January or February if it had an effect.”
Sadler believes this problem could become more extreme in years to come. “Climate change definitely will have an effect on the industry more inland, where we’re seeing fires more commonly – it could be pretty dramatic.”
One beacon of hope we see every year from these fires is how quickly the cannabis community comes together during times of hardship. Sadler’s company donated $5,000 to the CalFire Benevolent Foundation, an organization that supports firefighters and their families in times of crisis.
A large number of cannabis companies, like CannaCraft, Mondo, Platinum Vape and Henry’s Original, just to name a few, have come together to help with relief efforts, donate supplies, offer product storage and open their doors to families.
If you want to help, there are a lot of donation pages, and crowdfunding campaigns to support the communities impacted. The California Community Foundation has set up a Wildfire Relief Fund that you can donate to.
This GoFundMe campaign is called Farmers Helping Farmers and still needs a lot of funding to reach their goal. Check out their updates section to see how they are helping cultivators in real time. This Leafly page is also a very useful guide for how you can donate supplies, volunteer and help those impacted the fires.
Dr. Philipp Rösler, the former federal Minister of Economics and Technology and Vice Chancellor of Germany from 2011-2013 has just joined the board of Swiss cannabis company Pure Holding AG.
The move is interesting for a number of reasons, not the least of which is that it signals how political currents are moving in Germany, if not Europe beyond that.
To American eyes, Pure Holding looks like a very organized, corporate farm and cannabis manufacturer, organized to produce and test high quality cannabis, extracts and white label products for the coming storm of interest – no matter where European regulatory winds may temporarily go on hemp extracts.
Geopolitics At Play The fact that the farm is on the Swiss side of the border is also a signal that many Germans (at least) expect the EU to drag its feet on what kind of animal even low-THC and THC-free cannabinoids are while consumers vote with their pocket books across the continent and buy online imports.
The fact that Rösler is politically associated with the Free Democratic Party (FDP) of which he was also chair, is another indication that Germans in general are deeply upset about the slow movement of the CDU party (the Christian Democratic Union) on this issue (just like many others).
The FDP, like all other parties (except the extreme right wing Alternativ für Deutschland or Afd) has been much more forward about cannabis reform. That said, the party currently at the helm of the ruling coalition (CDU) has also been repeatedly accused of dragging its feet on the issue – no matter that medical cannabis was approved here as a therapy mandated for coverage by public health insurers.
The difficulties however that most patients have had to go through is not over. Reform has come here, but still for most, in name only.
The fact that Rössler was also a cardiothoracic surgeon before his stint in national politics is also a sign that the medical community is taking notice of the health effects of cannabis. That he was also federal minister of health of Germany (between 2009 and 2011 in Angela Merkel’s second cabinet) is also a clear indication that the topic of more cannabis reform is on the agenda at home in Germany, including Europe beyond that.
Even if, right now, certainly compared to what is developing in the UK, on a much slower boat to at least commercially accessible, low THC reform.
Philipp Rösler, former vice chancellor of Germany
The Current Debacle Over Hemp In The EU
It is unclear what the fate of hemp is in the EU at present. With the region’s administrators coming to a legally non-binding and decidedly non-scientific holding pattern on “CBD,” (namely that it is a narcotic) it could very well be that the Swiss, English and importers from the rest of the world bring in flower, extracts and products that the region cannot keep out, but is not quite copacetic about embracing, just yet.
That said, with major health food producers now stocking hemp seed extract on the stores of major German grocery stores, it is clear that the worm is turning, one former politician and now board member at a time.
Why The Fuss Over Hemp At All?
The bigger debate is actually a scientific one. It boils down to parsing cannabinoids from the same plant correctly, while also understanding the role that they play together.
That this is now happening, roughly twenty years after the discovery of the human endocannabinoid system – and the recognition that the human body itself creates cannabinoids that are mimicked by external phyto (or plant sourced) cannabinoids, is a victory, even if a late one.
It also signals that at a high level, the debate about cannabis as a drug if not a tool for maintaining overall body wellness, is not abating, but indeed proceeding even as the debate stymies politically at a country-by-country if not regional level.
What Will Reform In The EU Look Like?
While the analogy is not exactly the same, and for a variety of reasons starting with the fact that European countries are sovereign and independent states of Europe and not part of a single federal country, it appears that cannabis reform will look very similar to the progress of the same as it has unfolded so far in the United States.
By Seth Mailhot, Steve Levine, Emily Lyons, Megan Herr 1 Comment
On August 20, 2020, the Drug Enforcement Administration (DEA) published an Interim Final Rule on industrial hemp and hemp derivatives (the interim rule), which immediately went into effect, to conform DEA regulations with the Agriculture Improvement Act of 2018 (the 2018 Farm Bill).
The 2018 Farm Bill effectively removed industrial hemp from the definition of “marijuana” in the Controlled Substances Act (CSA). Additionally, tetrahydrocannabinols contained in industrial hemp, such as cannabidiol (commonly known as CBD), were also removed from the purview of the CSA.
The 2018 Farm Bill defines hemp as:
the plant Cannabis Sativa L. and any part of that plant, including the seeds thereof and all derivatives, extracts, cannabinoids, isomers, acids, salts, and salts of isomers, whether growing or not, with a delta-9 tetrahydrocannabinol concentration of not more than 0.3 percent on a dry weight basis.
Accordingly, because cannabis and its “derivatives, extracts, [and] cannabinoids” are not considered “marihuana,” so long as their delta-9 tetrahydrocannabinol (THC) concentration is at or below 0.3% on a dry weight basis, the regulation of hemp fell outside the authority of the DEA. However, the DEA’s interim rule attempts to draw a hard line in the sand as to when the plant, and any products derived therefrom, are considered “marihuana,” thereby still subject to the DEA’s purview.
Specifically, the interim rule promulgates the DEA’s position that hemp processors can convert otherwise legal hemp into illegal “marihuana,” thereby bringing it back under the DEA’s authority, if such processing and extraction increases the THC content above the 0.3% THC threshold, even momentarily. Specifically, the interim rule states:
[T]he definition of hemp does not automatically exempt any product derived from a hemp plant, regardless of the Δ9-THC content of the derivative. In order to meet the definition of ‘hemp,’ and thus qualify for the exemption from [S]chedule I, the derivative must not exceed the 0.3% Δ9-THC limit. The definition of ‘marihuana’ continues to state that ‘all parts of the plant Cannabis sativa L.,’ and ‘‘every compound, manufacture, salt, derivative, mixture, or preparation of such plant,’ are [S]chedule I controlled substances unless they meet the definition of ‘hemp’ (by falling below the 0.3% Δ9-THC limit on a dry weight basis) or are from exempt parts of the plant (such as mature stalks or non-germinating seeds) . . . As a result, a cannabis derivative, extract, or product that exceeds the 0.3% Δ9-THC limit is a [S]chedule I controlled substance, even if the plant from which it was derived contained 0.3% or less Δ9-THC on a dry weight basis.
Accordingly, the DEA’s stance creates a substantial risk for processors who will be considered to be in possession of a Schedule I controlled substance during the extraction process if the THC content exceeds the 0.3% THC threshold at any point during processing, an almost inevitable result of the extraction process. Nevertheless, the interim rule states:
the definition of hemp does not automatically exempt any product derived from a hemp plant, regardless of the Δ9-THC content of the derivative. In order to meet the definition of ‘hemp,’ and thus qualify for the exemption from [S]chedule I, the derivative must not exceed the 0.3% Δ9-THC limit.
Although the DEA impliedly recognizes the fact that hemp processing can result in a temporary increase in THC content, it still took the position that, should the THC content exceed 0.3% THC at any point during the extraction process, processors will be considered to be in possession of a Schedule I controlled substance, regardless of whether the finished product complies with federal law.
Just some of the many hemp-derived CBD products on the market today.
Consequently, the interim rule creates significant criminal risk for anyone processing industrial hemp, as the DEA has asserted that the processing of hemp into extracts, derivatives and isolated cannabinoids (which are arguably legal under the 2018 Farm Bill) can result in unintentional violation of federal law, thereby subjecting processors to the risk of significant criminal liability. That said, the interim final rule does not appear to be a shift in DEA policy since the passage of the 2018 Farm Bill in December 2018, nor has DEA issued any warnings to industrial hemp manufacturers or otherwise signaled a change in enforcement policy by issuing the Interim Final Rule.
In addition, the DEA took several other steps in the interim final rule towards the deregulation of hemp products:
Adding language stating that the definition of “tetrahydrocannabinols” does not include “any material, compound, mixture, or preparation that falls within the definition of hemp set forth in 7 U.S.C. § 1639o”.
Removing from Schedule V a “drug product” in an FDA-approved finished dosage formulation that contains cannabidiol (CBD) and no more than 0.1 percent (w/w) residual tetrahydrocannabinols (e.g. Epidiolex).
Removing DEA import and export controls for hemp extract that does not exceed the statutory 0.3% THC limit.
In May 2019, there were 4,400 reports of tornadoes, hail and high winds across the U.S. That’s the highest number of similar weather incidents on record since 2011. This increasing number of weather incidents has a huge effect on the cannabis industry, which has turned more frequently to outdoor cultivation since legalization.
While outdoor cultivation can develop the flavor of the cannabis crop, much like wine, it also brings with it some unique challenges. Each component of the weather – wind, rain, temperature – plays a role in whether a crop succeeds or fails. While conditions one year may easily lead to a bumper crop, the conditions the following year may not be as favorable. And as the weather becomes more volatile due to climate change, growers are ever more at risk, especially when they aren’t insured.
Evan Stait, author and commercial account executive for HUB International
Unfortunately, traditional crop insurance isn’t available for outdoor cannabis cultivators, primarily because of a lack of data on yield performances – and the impact the weather has on yields. Insurance companies don’t create policies until they have the data to back the policy. But meanwhile, the growers are assuming all the risk.
Enter parametric insurance. Parametric insurance is a program that pays out after a certain parameter is met. In the case of cannabis growers, the parameters are weather-related. The policy is triggered when the weather varies from the average – if there is too much rain during a specific period of time, for example, or an occurrence of large hail. Because the policy is related to average weather, it has to be tailored to the specific growing region – which means the parameters for Colorado won’t be the same as a policy for Maine.
For cannabis crops, coverage can be created for the following parameters:
Rain (recorded in inches of rainfall over a period of time)
Wind (recorded in miles per hour)
Early freezing (using recorded temperatures)
Hail (measures intensity and size of the hail)
Drought (for non-irrigated plots)
Once a parameter has been set, the policy starts to pay out at the strike point, or the average measurement specified in the policy. Coverage continues to pay out until the exhaust point, or the entire limit of the coverage is paid out. It works well because it’s straightforward: The further away from the average, the more the likelihood of catastrophic loss.
Parametric insurance isn’t for everyone. It’s a program designed to fill gaps that exist within the traditional insurance system. Nor is it designed to stand alone. But it can protect outdoor cannabis cultivators from weather risks that are truly beyond their control, especially given the hardening property insurance market.
In addition, it works for two simple reasons:
Simplicity: Recorded weather events leave no room for ambiguity or dispute. You don’t even need an adjuster to guide the claims process. The official weather data proves what happened.
Correlation: There is a high degree of correlation between measurable weather events and potential damage to outdoor crops.
Parametric coverage is not widely available. Many insurance professionals may not even know of it. But with the property insurance market hardening and a growing need to protect you and your cannabis business from weather-related disaster, parametric coverage may be your best bet. Make sure you speak to a broker who knows about it.
In a press release published last week, the Oklahoma Medical Marijuana Authority (OMMA) announced they have awarded their seed-to-sale traceability contract to Metrc, a national company with contracts for the same service in 14 other states.
According to OMMA Interim Director Dr. Kelly Williams, working with Metrc will help them protect public health, by expediting recalls. “The seed-to-sale system will greatly expand our compliance capabilities and improve the effectiveness and speed of any future recall efforts,” says Dr. Williams. “It will also allow us to detect unusual patterns that may indicate product diversion.”
Metrc has begun work towards their rollout of the system, which they expect to have ready by February 2021. “We know that businesses will have many questions in the coming weeks, and we will answer them as quickly as possible,” says Dr. Williams.
Oklahoma legalized medical cannabis in 2018 and the market has expanded considerably. There are more than 300,000 patients and almost 10,000 licensees. It has the highest number of dispensaries per resident in the country.
Jeff Wells, CEO of Metrc, says Oklahoma has done a good job so far in developing one of the fastest growing markets in the country. “We’re honored Oklahoma selected Metrc to implement the state’s first cannabis tracking system,” says Wells. “With one of the fastest growing medical cannabis markets in the United States, the OMMA has done a tremendous job developing this new industry, and we’re excited to support its ongoing success. We look forward to working with state regulators and licensees to launch our system and ensure cannabis products are safe and secure for patients.”
All major industries took a hit during the COVID-19 pandemic, but in many states, cannabis dispensaries were labeled as essential, which has allowed the industry to continue with some alterations. The impact now will come from what innovations and improvements the industry can leverage going forward.
From changes to protocols and buyer behaviors to supply chain disruptions, there were many new hurdles for the industry in addition to the ones cannabis businesses already faced, such as funding. But the silver lining could be that businesses within the cannabis industry become less of a specialty and more ‘every day’ than ever before.
The effects of the pandemic on the cannabis industry
Overall, the industry has fared well, in part thanks to its distinction as an essential service in states where cannabis is legal. It’s possible states made this decision for the same reason that alcohol businesses were deemed essential in most places: hospitals are not equipped during pandemic times to take care of people who are being forced to detox or those suffering from anxiety because they don’t have access to their legal drug of choice.
In a multitude of ways, cannabis businesses have adapted to bring calm in a storm while at the same time making manufacturing adjustments to meet the CDC guidelines. For example, there is more attention placed on individually pre-packaged products for single use; something that is less sharable as an experience but eminently practical.
Another area that has shifted a little is in the limiting of the exchange and interaction between business owners and staff relative to the customers. It’s all in the aim of mitigating the risk of exposure, but it has changed the dynamic in many cannabis businesses. This is the new normal for the time being and the industry has adapted well.
Ultimately, retail cannabis businesses today are no different than the retail of candy, cigarettes or alcohol. Certainly, segments of the industry have still struggled. Lack of tourism and the curbside/take out circumstances at dispensaries took their toll. But without the opportunity to still conduct business in some capacity, 50-60% of all operators would have gone out of business. Plus, as many people use cannabis to offset medical symptoms, including pain management, there is a legitimate need for cannabis to be available. The pandemic has provided the opportunity for many who might not have tried it before to give it a chance to help them medicinally.
Behaviors have changed, including those of buyers
Driven by consumer interests, many dispensaries have adapted to provide curbside pickup options, delivery of online orders and more. That has meant that the customer also needs to be more knowledgeable about cannabis: the experienced consumer knows what they like and want and can make their choices at a distance. Someone who is new to cannabis use might find navigating the choices and options a little more difficult, without the help of experienced staff. The breadth of material online and the ability of some dispensaries to share content that helps the consumer to make choices, in the absence of walking around the dispensary, have been additional tools at the disposal of businesses.
That said, the cannabis industry today is not a vastly different one: it is adapting to the new rules and new reality. Whether this way of doing business—at a distance—is a temporary or permanent solution will be dependent upon what federal and state regulators dictate in the months ahead, but there is likely to be ongoing demand for being able to order online and keep social distance protocols in place.
An interesting example is the Ontario Cannabis Store (OCS) in Ontario, Canada. This is a government run shop that has retail as well as a robust online presence, with free delivery during the pandemic. This has facilitated an increase in new customers, which had already jumped, post legalization. People who might have felt uncomfortable going into a dispensary can still learn about cannabis online and order it, from the relative comfort and safety of their sofa.
Supply chain disruptions and the cannabis industry
The industry has long been focused on overseas suppliers. With the arrival of the pandemic and restrictions on obtaining products from other countries, supply chains have been disrupted for many cannabis businesses. That has forced many to shift their supply chains to more local manufacturers, in North and South America.
In the long run, this should have a positive impact for the industry, so that despite the short-term disruption to the supply chain, which is having an impact on the industry as a whole, there could be an upside for local producers, growers and manufacturers. It will take time to know how this will all play out.
Funding and other issues for the cannabis industry
For a new cannabis startup in these times, the key will be what it has always been for any business, just to a greater degree: due diligence. Companies that want to open a cannabis business, whether during the pandemic or not, need to evaluate the opportunity as one would any investment. It’s all about the numbers: data for the industry as a whole and specifically from competition. These days, that data is widely available and more and more consultants and investors have expertise in this industry. “Overall, there is more interest in the industry than ever before”
It’s vital to be extremely well versed, particularly for businesses that are relatively new in the industry, because the single biggest issue for many has and will continue to be funding and investment. The cannabis industry is no different than any other business, except for the fact that it is a specialty business. With that comes the need to look for funding among investors who have some knowledge or appreciation for the industry.
Some of the key concerns traditional investors will have include:
Regulatory differences from state to state: since cannabis is still illegal at the federal level, there can be an array of hurdles at state and local level that make cannabis businesses trickier to work with.
There are religious based/morality issues for some lenders in dealing with the industry. These aren’t dissimilar from issues with other industries such as adult entertainment and gaming. It’s also fair to point out that, morality aside, these industries have thrived in the last several decades.
So, while traditional banking institutions will often deal with the proceeds from the cannabis industry, including allowing bank accounts for these businesses, there is far less of a chance that they would invest in a cannabis business, for fear of risking their license. They can even go so far as to refuse to include income from a cannabis business in the determination of a loan application.
There are more unique lending or investing groups that either specialize in cannabis or are starting to open their books to specialize in cannabis. Overall, there is more interest in the industry than ever before, as it becomes normalized in American society: more participants and more insiders of the industries that are willing to invest in the right idea.
Will legalization be more likely in the future?
The fact that cannabis businesses and dispensaries have been deemed essential services during the pandemic, where they legally operate, has shed new light on the relevance of these businesses and the advantages of more widespread legalization.“Consumers will help drive the innovations as they demand clean consumption methods”
In fact, the pandemic has normalized a lot of new behaviors, including the acceptable use of cannabis to help with stress and anxiety. People are, perhaps thanks to staying at home more, doing the legwork to understand how cannabis could be useful to them in managing their stress. The medicinal benefits of cannabis have long been researched and understood: consumers are coming into the fray to express their interest in it, which can only fuel the possibility of more widespread legalization.
Add to this the fact that the cannabis industry is a growth industry. There are companies and jobs that aren’t coming back, post-pandemic. There is an opportunity to grow the cannabis industry to the general benefit of many, both as business owners and employees. The revenue generated from taxation following legalization would also benefit many state coffers. Federal level legalization would be the panacea to eliminate the mixed message, state by state regulation that currently exists.
Opportunities for innovation, moving forward
As more and more people become interested in the industry, and as cannabis use is normalized within society through legalization, the opportunities for the industry can only expand.
For an industry that started on the simple concept of smoking cannabis, the advances have already been legion: edibles, nanotechnology-based formulations for effective, clean consumption and many more innovations.
In a world that increasingly sees smoking as a negative, for the obvious impact to lung health, there are so many opportunities to grow the industry to find consumption methods that are safe and still deliver the impact of the inhaled version.
Here again, consumers will help drive the innovations as they demand clean consumption methods. The technology is available to make this possible; it only takes innovation and education to find the best ways to move this industry forward.
As legalization expands—and particularly if it is dealt with at the federal level—the industry will be able to capitalize on existing infrastructure for manufacturing and distribution, allowing new businesses to grow, get funded and thrive in the new normal.
One of the biggest challenges that cultivators, processors and distributors face in doing business is the requirement to track the product at every step in the production process, from seed to sale. When you add the wide range of label sizes and requirements across the supply chain, labeling can feel overwhelming. While business systems such as METRC, BioTrack, MJFreeway and others are key, integrating accurate and secure barcode labeling with those systems will streamline the end-to-end process while meeting traceability requirements. Here are some things to consider, no matter what role in the cannabis supply chain you play.
Cultivation: Where Tracking and Labeling Starts
Cultivation is where the tracking process begins – integrating barcode labeling METRC, BioTrack, MJ Freeway from the start will streamline the end-to-end process
It’s crucial to implement accurate labeling processes from the beginning, whether growing for a customer or your own vertically integrated operation. The cannabis industry is faced with strict labeling regulations for a variety of cannabis products. Start with a labeling system that can integrate with METRC, BioTrack, MJ Freeway or other seed to sale software solutions. Your barcode labeling solution should also include label approval requirements, so you have role-based access and transparency with label changes and print history in case of issues or recalls. Whatever cannabis labeling regulations your business faces, label design software helps you create compliant cannabis labels throughout the supply chain, from grower to consumer.
Radio Frequency Identification (RFID) Labeling
Select regulations require growers to leverage RFID technology to track the location of the plants in their grow houses. RFID technology also enables accurate real-time inventory analysis and helps reduce manual labor costs, as well as errors that can occur with manual counting. To accurately encode RFID tags with variable plant data, be sure you are using a barcode labeling system that can enable easy RFID tag encoding that integrates data from all your business systems. Fastening RFID tags to plants across your grow house floor enables quick and easy location tracking, and RFID reading removes the need for a manual line of sight and allows hundreds of tags to be read at the same time, speeding up shipping and receiving.
Lab Testing
After a plant is cultivated, a certain percentage is sent to a lab to be tested to ensure its proper strain, weight and compound makeup. After your product has been lab tested, leverage the data from your certificate of analysis to accurately display on your cannabis product labels, including:
Pass/fail chemical testing
Final date of testing & packaging
Identification of testing lab
Cannabinoid profile & potency levels
Efficiently display lab testing results on product labels with the use of a QR code for the consumer to review the independent lab’s certificate of analysis
Processing and Production: Tracking and Labeling After the Plant Has Been Harvested
A lot of information needs to go on a cannabis label. Whether you’re producing pre-rolls, packaged flower, edibles, beverages, topicals or cartridges, your labeling software must have the capability to create a wide variety of label sizes with barcodes that encode a large volume of data, while also being fully compliant and showing consumer appeal.
Your cannabis labeling software should do the following for you:
Support database integration to populate variable data from METRC, BioTrack, and other systems
Import high-resolution artwork and leverage with dynamic barcodes and variable data
Contain barcode creation wizards for 1D & 2D barcodes
Automate weigh & print
RGB/CMYK color matching
Feature secure label approval processes, label change tracking and print history
Offer WYSIWYG (What You See is What You Get) printing
Automatically trigger printing directly from scales and scanners when cannabis is weighed
Automatically integrating data with your barcode labeling software improves regulatory compliance, security and reduces manual processes that can lead to labeling errors
Integrate labeling with your seed to sale software solution to automatically trigger label printing by an action in your seed to sale system or by monitoring a database. By integrating your label printing system with your seed to sale traceability system, you can expect to minimize errors, increase print speeds and maximize your ROI. Your business system already holds the variable data such as product names, license number, batch or lot codes, allergens, net quantity, cannabis facts, warning statements and more. By systematically sending this data to the right label template at the right time, labeling becomes an efficient and cost-effective process.
Distribution: labeling for consumer and industry demands
The ability to manage and distribute inventory efficiently is critical in the cannabis market. Warehouses and distributors need to ensure proper storage, handling and traceability of product, from the warehouse to the truck.
Leverage your labeling software to easily create:
Packaging labels
Shipping labels
Case & pallet labels
Inventory labels
If you use the same data for your documents and labels, consider moving document printing into your label design software for greater efficiency. An advanced label creation and integration software enables label and document printing standardization by allowing multiple database records to be on one file. That means when new documents or labels come into your database, your software can seamlessly integrate.
Dispensaries can benefit from integrated seed to sale labeling for traceability, speed to market
Whether you’re a small outlet or a large dispensary, you benefit from integrated barcode labeling that starts from the beginning of the process. How? When barcode labeling software is integrated with seed to sale software, product is fully traced throughout the entire process, from tagging each plant at cultivation to identifying the consumer at point of sale, and accurately communicating that data back to METRC, BioTrack and other critical systems. Some dispensaries do package raw flower onsite, which many times means manually weighing, recording and entering the weight on the label, which is a time consuming and error-prone process. Integrating weigh and print functionality with barcode software enables dispensaries to use the action of weighing raw flower to automatically trigger the label print job. The variable weight is then accurately and automatically populated on cannabis flower package labels, creating an accurate and efficient on-demand labeling process for dispensaries. With efficient labeling processes, time spent creating, correcting, approving and printing labels will be reduced, getting product on the shelves faster.
The consumer-facing CBD industry operates in a regulatory gray zone even as it grows in prominence. Illegal to market as an unapproved drug, dietary supplement or food additive under the Food, Drug & Cosmetic Act, nevertheless, the CBD industry has flourished with ingestible products widely available. With the increased consumer interest in CBD, headwinds in the form of mislabeled or contaminated products and unsubstantiated therapeutic claims, combined with regulatory uncertainty, continue to be a drag on legitimate market participants and consumer perception of CBD products. The regulation of hemp-derived CBD falls under the purview of the Food and Drug Administration (FDA) and its charge to protect the public health. Despite having jurisdiction to regulate CBD products, the FDA has done little to bring regulatory certainty to the CBD marketplace. However, the FDA, with the assistance of the National Institute of Standards and Technology (NIST), recently took important steps that can be described as “getting their ducks in a row” for the eventual regulation of hemp-derived CBD in consumer products. Always looming is the threat of criminal enforcement of the Controlled Substances Act (CSA) by the Department of Justice’s Drug Enforcement Administration (DEA) for plants and products not meeting the definition of hemp.
Prior to July 2020, the FDA’s regulation of the CBD industry was limited to a public hearing, data collection, an update report to Congress on evaluating the use of CBD in consumer products, and issuing warning letters to those marketing products for treatment of serious diseases and conditions. The FDA recognizes that regulatory uncertainty does not benefit the Agency, the industry or consumers and, therefore, is evaluating a potential lawful pathway for the marketing of CBD products. In furtherance of this effort, the FDA took several recent actions, including:
Producing a CBD Testing Report to Congress1
Providing draft guidance on Quality Considerations for Clinical Research2
Sending a CBD Enforcement Policy to the Office of Management and Budget for pre-release review and guidance3
Not to be overlooked, the NIST announced a program to help testing laboratories accurately measure compounds, including delta-9 tetrahydrocannabinol (THC) and CBD, in marijuana, hemp and cannabis products, the goal being to increase accuracy in product labeling and to assist labs in identifying THC concentrations in order to differentiate between legal hemp and federally illegal marijuana. These actions appear to be important and necessary steps towards a still be to determined federal regulatory framework for CBD products. Unfortunately, a seemingly innocent interim final rule issued by the DEA on August 21, 2020 (Interim Final Rule), may prove to be devastating to hemp processors and the CBD industry as a whole.4 While the DEA describes its actions as merely conforming DEA regulations with changes to the CSA resulting from the 2018 Farm Bill, those actions may make it exceedingly difficult for hemp to be processed for cannabinoid extraction without violating the CSA in the process.
FDA Report to Congress “Sampling Study of the Current Cannabidiol Marketplace to Determine the Extent That Products are Mislabeled or Adulterated”
On July 8, 2020, the FDA produced a report to the House and Senate Committees on Appropriations detailing the results of a sampling study to determine the extent to which CBD products in the marketplace are mislabeled or adulterated. The study confirmed what the FDA, Congress and the marketplace already knew – that in this regulatory vacuum, there are legitimate concerns about the characteristics of consumer CBD products. These concerns include whether products contain the CBD content as described in the label, whether products contain other cannabinoids (including THC) and whether products were contaminated with heavy metals or pesticides. With these concerns in mind, the FDA tested 147 CBD and hemp products purchased online for the presence of eleven cannabinoids, including determinations of total CBD and total THC, and certain heavy metals. The key tests results included the following:
94% contained CBD
2 products that listed CBD on the label did not contain CBD
18% contained less than 80% of the amount of CBD indicated
45% contained within 20% of the amount listed
37% contained more than 20% of the amount of CBD indicated
49% contained THC or THCA at levels above the lowest concentration that can be detected
Heavy metals were virtually nonexistent in the samples
The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.
Due to the limited sample size, the FDA indicated its intention to conduct a long-term study of randomly selected products across brands, product categories and distribution channels with an emphasis on more commercially popular products. In furtherance of this effort, on August 13, 2020, the FDA published a notice soliciting submissions for a contract to help study CBD by “collecting samples and assessing the quantities of CBD and related cannabinoids, as well as potential associated contaminants such as toxic elements, pesticides, industrial chemicals, processing solvents and microbial contaminants, in foods and cosmetics through surveys of these commodities.”5
Even though this report was not voluntarily produced by the FDA, rather it was required by Congress’ Consolidated Appropriations Act of 2020, it importantly solidified a basis for the need for regulation. With less than half of the products tested falling within the 20% labeling margin of error, this suggests rampant and intentionally inaccurate labeling and/or significant variability in the laboratory testing for cannabinoids.
NIST Program to Help Laboratories Accurately Measure Compounds in Hemp, Marijuana and Cannabis Products
Proper labeling of cannabinoid content requires reliable and accurate measurement of the compounds found in hemp, marijuana and cannabis products. As part of NIST’s Cannabis Quality Assurance Program, NIST intends to help labs produce consistent measurement results for product testing and to allow forensic labs to distinguish between hemp and marijuana.6 As succinctly stated by a NIST research chemist, “When you walk into a store or dispensary and see a label that says 10% CBD, you want to know that you can trust that number.” Recognizing the lack of standards due to cannabis being a Schedule I drug for decades, NIST intends to produce standardized methods and reference materials the help labs achieve high-quality measurements.
NIST’s efforts to provide labs with the tools needed to accurately measure cannabis compounds will serve as an important building block for future regulation of CBD by the FDA. Achieving nationwide consistency in measurements will make future FDA regulations addressing CBD content in products achievable and meaningful.
FDA Industry Guidance on Quality Considerations for Clinical Research on Cannabis and Cannabis-Derived Compounds
On July 21, the FDA released draft guidance to the industry addressing quality considerations for clinical research of cannabis and cannabis-derived compounds related to the development of drugs. These recommendations are limited to the development of human drugs and do not apply to other FDA-regulated products, including food additives and dietary supplements. However, by indicating that cannabis with .3% or less of THC can be used for clinical research and discussing testing methodologies for cannabis botanical raw material, intermediaries and finished drug products, the FDA is potentially signaling to the consumer-facing CBD industry how the industry should be calculating percentage THC throughout the product formulation process.
While testing of botanical raw material is guided by the USDA Interim Final Rule on Hemp Production,7 the FDA warns that manufacturing processes may generate intermediaries or accumulated by-products that exceed the .3% THC threshold and may be considered by the DEA to be Schedule I controlled substances. This could be the case even if the raw material and finished product do not exceed .3% THC. The FDA’s guidance may eventually become the standard applied to regulated CBD products in a form other than as a drug. However, through its guidance, the FDA is warning the CBD industry that the DEA may also have a significant and potentially destructive role to play in the manufacturing process for CBD products.
FDA Submits CBD Enforcement Policy Guidance to the White House
On July 22, 2020, the FDA submitted to the White House Office of Management and Budget a “Cannabidiol Enforcement Policy – Draft Guidance for Industry” for its review. The contents of the document are not known outside of the Executive Branch and there is no guarantee as to when, or even if, it will be released. Nevertheless, given the FDA’s interest in a legal pathway forward for CBD products, the submission is looked upon as a positive step forward. With this guidance, it is important to remember that the FDA’s primary concern is the safety of the consuming public and it continues to collect data on the effects of ingestible CBD on the human body.
It is doubtful that this guidance will place CBD products in the dietary supplement category given the legal constraints on the FDA and the lack of safety data available to the FDA. The guidance likely does not draw distinctions among products using CBD isolate (as found in Epidiolex), full or broad spectrum hemp extract, despite the FDA’s expressed interest in the differences between these compositions.8 Instead, the FDA is more likely to establish guardrails for CBD ingestible products without authorizing their marketing. These could include encouragement of Good Manufacturing Practices, accuracy in labeling, elimination of heavy metal and pesticide contamination, and more vigorous enforcement against marketing involving the making of disease claims. The FDA is not expected to prescribe dosage standards, but may suggest a maximum daily intake of CBD for individuals along the lines of the U.K.’s Food Standards Agency guideline of a maximum of 70 mg of CBD per day.9
Identifying concerns in the current marketplace; promoting accuracy in testing; highlighting the line between FDA regulation and DEA enforcement; and proposing guidance to the industry all appear to be signs of substantial progress on forging a regulatory path for ingestible CBD products.
The DEA’s Interim Final Rule Addressing Derivatives and Extracts Could Have a Devastating Impact on the Cannabinoid Industry
The seemingly benign Interim Final Rule published by the DEA in August with the stated intent of aligning DEA regulations with the changes to the CSA caused by the 2018 Farm Bill’s definition of hemp could cut the legs out from under the hemp-derived CBD industry.10 Claiming it has “no discretion with respect to these amendments,” the DEA rule states that “a cannabis derivative, extract, or product that exceeds the 0.3% delta-9 THC limit is a schedule I controlled substance, even if the plant from which it was derived contained 0.3% or less delta-9 THC on a dry weight basis.”11 Under this interpretation of the 2018 Farm Bill language and the CSA, it is unclear whether processors of hemp for cannabinoid extraction would be in possession of a controlled substance if, at any time, a derivative or extract contains more than 0.3% delta-9 THC even though the derivative or extract may be in that state temporarily and/or eventually falls below the 0.3% threshold when included in the final product. It would not be unusual for extracts created in the extraction process to exceed 0.3% delta-9 THC in the course of processing cannabinoids from hemp.
The implications of the rule may have a chilling effect on those involved in, or providing services to, hemp processors. It is known, as revealed by the Secretary of the USDA to Congress, that the DEA does not look favorably on the legalization of hemp and development of the hemp industry. The DEA’s position is that the rule merely incorporates amendments to the CSA caused by the 2018 Farm Bill’s definition of hemp into DEA’s regulations. In doing so, the DEA made explicit its interpretation of the Farm Bill’s hemp provisions that it presumably has held since the language became operative. What is not known is whether this changes the DEA’s appetite for enforcing the law under its stated interpretation, which to date it has refrained from doing. Nevertheless, the industry is likely to respond in two ways. First, by submitting comments to the Interim Final Rule, which will be accepted for a 60-day period, beginning on August 21, 2020. Anyone concerned about the implications of this rule should submit comments by the deadline. Second, by the filing of a legal challenge to the rulemaking on grounds that the rule does not correctly reflect Congressional intent in legalizing hemp and, consequently, the rulemaking process violated the Administrative Procedure Act. If both fail to mitigate harm caused to the CBD industry, the industry will have to look to Congress for relief. In the meantime, if the hemp processing industry is disrupted by this rule, cannabis processors holding licenses in legal states may be looked upon to meet the supply needs of the CBD product manufacturers.
The Interim Final Rule also addresses synthetically derived tetrahydrocannabinols, finding them to be Schedule I controlled substances regardless of the delta-9 THC content. This part of the rule could impact the growing market for products containing delta-8 THC. While naturally occurring in hemp in small quantities, delta-8 THC is typically produced by chemically converting CBD, thereby likely making the resulting delta-8 THC to be considered synthetically derived.
The hemp-derived cannabinoid industry continues to suffer from a “one step forward, two steps back” syndrome. The USDA’s highly anticipated Interim Final Rule on hemp production (released Oct. 31, 2019) immediately caused consternation in the CBD industry, and continues to, due to certain restrictive provisions in the rule. Disapproval in the rule is evident by the number of states deciding to operate under their pilot programs for the 2020 growing season, rather than under the conditions of the Interim Final Rule.12 With signs of real progress by the FDA on regulating the CBD products industry, yet another interim final rule could undercut the all-important processing portion of the cannabinoid supply chain by injecting the threat of criminality where there is no intent by processors to violate the law. It is not a stretch to suggest that both the USDA and FDA are being significantly influenced by the DEA. The DEA’s Interim Final Rule is just another troubling example of the legal-illegal dichotomy of cannabis that continues to plague the CBD industry.
References
U.S. Food & Drug Admin., Report to the U.S. House Committee on Appropriations and the U.S. Senate Committee on Appropriations, Sampling Study of the Current Cannabidiol Marketplace to Determine the Extent That Products are Mislabeled or Adulterated (July 2020).
U.S. Food & Drug Admin., Cannabis and Cannabis-Derived Compounds Quality Considerations for Clinical Research: Guidance for Industry(July 2020).
U.S. Food & Drug Admin., Cannabidiol Enforcement Policy: Draft Guidance for Industry (July 2020).
Implementation of the Agriculture Improvement Act of 2018, 85 FR 51639 (Aug. 21, 2020) (to be codified at 21 C.F.R. §§ 1308, 1312).
U.S. Food & Drug Admin., Collection and Analysis of Products Containing CBD and Cannabinoids, Notice ID RFQ_75F40120R00020 (Aug. 13, 2020).
Agricultural Improvement Act of 2018, Pub. L. 115-334, title X, 10113 (codified at 7 U.S.C. §§ 1639o-1639s).
U.S. Food & Drug Admin., Report to the U.S. House Committee on Appropriations and the U.S. Senate Committee on Appropriations, Cannabidiol (CBD), p. 14 (March 2020).
U.K. Food Standards Agency, Food Standards Agency Sets Deadline for the CBD Industry and Provides Safety Advice to Consumers (Feb. 2020) at https://www.food.gov.uk/news-alerts/news/food-standards-agency-sets-deadline-for-the-cbd-industry-and-provides-safety-advice-to-consumers.
See supra n. 4.
Id.
U.S. Dept. of Agriculture, Status of State and Tribal Hemp Production Plans for USDA Approval (as of Aug. 26, 2020).
Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the fifth and final article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.
In this week’s article, we talk with Kristen Suchanec, VP of Production at Island. Kristen converted her experience in traditional consumer packaged goods to cannabis to help create a brand that is sought after by many. The interview with Kristen was conducted on August 21, 2020.
Aaron Green: Good afternoon Kristen, I am glad we were able to put this interview together. I know you have been very busy!
Kristen Suchanec: I’m so sorry this took so long to actually work! Thank you for bearing with me. I’m happy we are able to talk.
Aaron: Great! I like to start off the conversation with a question that helps our readers get to know you a little better. So, Kristen can you tell me how you got involved at Island?
Kristen Suchanec, VP of Production at Island
Kristen: My background is in manufacturing and planning for consumer packaged goods. I had a friend of a friend and we were just at a happy hour and I asked what he was up to. He was actually our VP of Finance at Island and he handed me a box of pre-rolled joints. They were our Island Minis and I thought it was a great customer experience. I loved the brand and packaging which made it a consumer product versus, you know, this was a few years back where cannabis wasn’t necessarily commoditized or branded. I got really excited about that because I feel like cannabis should be traditional CPG and it should appeal to different people and it should have different brands that appeal to those different groups. So I literally just started a conversation. His brother is our founder and CEO and they needed someone to run production so that was my background and it all kind of lined up and I ended up being employee number five at Island!
Aaron: Wow, employee number five – awesome! OK, great. That is some nice background about how you got involved at the company. The next questions get into product development and manufacturing. The first question is: what’s your decision process for starting a new product?
Kristen: Yea, we are right now owning the lane between cultivation and distribution. So, getting those raw materials for whether it be concentrates or flower and then converting them into that final packaging for everything. So that is what we focus on and spend all of our time with automation and trying to make that process as efficient as possible.
When we’re looking at a new product we’re not necessarily creating a new extraction, we are really looking at the market and the end consumer and what people want. At Island we’ve really focused on vape, pre-roll and packaged flower. Those are the three categories we are working on right now. We are expanding and looking to move more towards vape and live resins and specialty concentrated products that we haven’t really had in our portfolio before. What we would like to do is make sure we have the capability to manufacture that and then take a look at where we think the market is going. We are trying to go in the flower, pre-roll and vape because that is where we spent so much of our time getting pieces of automation so not everything we are bringing in house is manual.
Aaron: Now when you say the capability to manufacture that are you talking about from a packaging perspective or…?
Kristen: Yes, so we won’t do any extraction on site. It’s getting distillate, shatter and flower and then we take that and convert that either into pre-rolled joint, a package of flower or any other final product. So, we are looking at automating that packaging piece.
Aaron: Got it. OK, so the next question — and I think you kind of touched on this as well — are you involved in manufacturing to the extent that you are manufacturing the packaging?
Kristen: Yes absolutely. My whole team’s manufacturing is based out of Oakland. That’s where we do all the conversion of products. I oversee that entire team and have been really involved in a lot of the equipment that we have sourced and iterations that we’ve gone through to make sure that we’re able to automate as much as possible. We’ve really focused on the issue of weighing the material. For our flower line everything is weighed and put into a jar, capped, sealed and labeled for it to come off our lines. We don’t have anyone in packing or anything like that. Our pre-rolls manufacturing is an automated machine where it actually weighs the flower before going into the cone so we’re not having to weigh after the fact and take into account the weight of the cone because that’s so variable so we know that the customer is getting consistency. Then for the vapes, it’ssame thing – the volumetric doses everything.
I have to give my credit to everyone on the floor who is doing the day to day, they find so many new solutions since they are the ones that are hands on. I am really involved in what new equipment we need, what problems we are looking to solve and what’s causing our bottlenecks so we can continue to improve our process week over week and year over year.
Aaron: We’ll dig into some of those problems in a bit. What is your process for not just starting new product but for developing a new product?
Kristen: Yeah, absolutely. So, I think it’s really interesting to see where the market is going. What’s selling really well and especially over the past year pre rolls have been a huge growth platform for us. And especially now, we’ve seen some changes because of COVID as well. We have single joints. But then we have our Minis, which I’ve mentioned before, which are half gram joints. We’re seeing sales on those actually increased because I think people are sharing joints as people want individual things because of this pandemic.
When we go through this process, we’re really – again – we’re so focused on what the consumer wants, and what we think is going to add to our portfolio. Then when marketing and our product team comes to me, we really focus on our machinery, what we can do with it currently, and if we would need something additional. So,we’re excited about expanding into 510s right now. We’re looking at how we can automate the process of capping – we can fill right now, but not cap. And then we also take a look at packaging.
I think it’s a little different than creating like a whole new product, extraction or anything like that, but we were looking at more sustainable options for packaging for child resistance because we’re trying to move away from barrier bags as much as possible. We’re looking at, okay, how many stickers do we need to put on there? What is the labor time going into each piece of product? And again, how are we eventually going to get some consistency across product lines, etc.
So, it’s really taking all three of those components, making sure we’re getting out the customer that feels like they want. I’m having it either fit into our process or again, then go through and look at what automations meanand automation equipment investment you want to make for long term future investments.
Aaron: Are you developing new products internally, or are you relying on outside manufacturers for that?
Kristen: Not everything we do is internal. We have a big network of, you know, cultivators and extractors we work with, but we’re in the midst of getting our own cultivation and manufacturing in house by working with other companies. So with that we’re doing everything.
Aaron: Do you ever bring in external product development consultants for helping out with your processes?
Kristen: No, we don’t bring in consultants. But we have brought in another brand into our fold via a brand called Neutron Genetics. That is part of our overall portfolio. We work very closely with the founder because he has a lot of trade secrets, a lot of his own processes to make sure you’re getting the best product for that specific brand.
Aaron: In your product development, what does getting stuck look like to you?
Kristen: That’s a good question. I think one of the biggest challenges is working with the plant itself, because it’s not consistent and it’s not homogenous. You could get the same strain from the same cultivator, but it’ll be a different batch. It might be a little stickier or a little larger, etc. When you’re looking at traditional manufacturing and automation, you want consistency, homogenized liquids, same viscosity every time, and we don’t have that because the plant itself is natural and is going to have all these different expressions depending on the batch and how it was grown and how it was trimmed even.“I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team.”
So, getting stuck means finding an off-the-shelf solution that might work for, you know, nuts and bolts or some kind of food production and then you’re going to have to convert it to actually work with the cannabis plant. So that’s what makes it so challenging, but also really exciting. In the bud, humidity and air can really throw off a manufacturing process which is really different than just doing beverages for example.
Getting stuck means really having to work with the plant concentrates specifically if you think about just the nature of those whether it be shatter, distillate or very sticky product. So again, working with machinery isn’t always what goes hand in hand. So, getting stuck is dealing with all those different formats and inconsistency using the same product day after day.
Aaron: It sounds like consistency is kind of a main topic here?
Kristen: Yeah, I think it depends on what product format we have. For example, about a year ago, we launched infused pre-rolls for Neutron where we’re putting flower, kief and shatter into a joint. So that’s going to perform differently on a piece of machinery than just straight flower.
I think it all depends on the product. Usually it happens when it’s in that machine, you’re trying to get a good flow and a good consistency. You want to have time studies, you know how long it takes to make each batch. But if a certain flower mix is performing differently, it’s getting the settings of the machine dialed, right? It’s also properly training personnel so people know how to react when things get going. Sometimes things get physically stuck in the machine as well, so to be able to react on that.
I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team. So for our pre-roll machine, we are now on our third version of it, just because we kept running into the same roadblocks and I’m hoping that continues to evolve and we just continue to get better equipment year after year.
Aaron: I see, do you ever hire outside consultants when you do get stuck?
Kristen: We’ve worked closely with vendors. I will say that we’re not a machine shop or engineering firm. So we’re not the ones creating a lot of what we use on the floor. We’ve partnered with various vendors, which has been helpful, but we haven’t used external consultants.“When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see.”
Aaron: Okay, now imagine that you have a magic wand and somebody can come in and help you. What does your magic helper look like?
Kristen: I could probably make a really long list if I’m focusing on just my manufacturing and everything! I think the next thing which we’re already thinking about that magic wand is how to get a perfectly rolled joint without having so much manual human touch to it. And like I said, we’ve really attached to that weighing problem. And we’ve seen solutions out there that you know, claim to twist and have that “perfect roll” and you don’t need to even touch it. But I think the biggest challenge there is it depends how well it’s packed. You know, you don’t want it too tight. You don’t want it too loose for that customer experience. So getting that quality, if I could wave a magic wand where I’m putting in, you know, paper on one side and out comes perfectly rolled joints, that would be my magic wand for sure. Okay, I think there’s a lot of solutions out there but to get that quality and that consumer experience that we want, I haven’t seen working practice yet.
Aaron: Okay, What’s the what’s the most frustrating thing you’re going through with the business right now?
Kristen: Again, that could be a long list! I think from a more macro-level, it’s definitely the competition with the illicit market and just how there’s not enough outlets for legal cannabis right now in the state of California. When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see. We’re going to get this growth and projection of the right number of dispensary licenses and things like that are definitely a huge frustration as well as with the tax structure right now because it’s obviously contributing to people going to the illicit market.
Aaron: So what are you following in the market? And what do you want to learn more about?
Kristen: Yeah, I think that’s a great question. I think the thing I’m most excited about for the larger population isjust more research to come out about the actual attributes of the plant, or how different cannabinoids react together and can have different effects. How terpenes can affect the high, how things can be used and distantly, recreationally, etc. And really, hopefully evolve and move away from strictly some sativa, hybrid,indica classifications, and really be able to educate the consumer more about the plant so people can have a more a personal relationship to understand how cannabinoids or specific terpenes are going to give them a different effect. And again, I think that’s so interesting because it could be used for therapeutic reasons that people do consume cannabis or it could just make it a better experience for people who want to take this as an escape or a way to relax and everything. So I’m really excited because more research is going to be able to get done and we can really learn more about how all of these things interact in the body and then people can take it to a whole new experience and be more educated all around.
Aaron: Alright that’s the end of the interview Kristen! Nice chatting and meeting you!
According to a press release, Shimadzu Scientific Instruments and Front Range Biosciences (FRB) announced a partnership where they will establish the FRB Hemp Science Center of Excellence. The center will focus on genetics, biobanking, breeding and analysis, all with Shimadzu instrumentation. The center will host scientists performing chemical and genetic analytical research to “support the development of new hemp varieties for the production of cannabinoids, terpenoids and other compounds for medical and wellness applications; lipid, wax and protein ingredients for food and cosmetics applications; and fiber for industrial applications.”
Dr. Jon Vaught, CEO of Front Range Biosciences
Located at FRB’s new headquarters in Boulder, CO, the new center will allow for collaborative efforts between researchers from the public and private sectors like academic, nonprofit and government agencies. The center will expand FRB’s collaboration with the University of Colorado at Boulder. Researchers at other institutions can apply for grants to support students, postdoctoral candidates and other researchers at the new center.
Dr. Jonathan Vaught, CEO of FRB, says they’re honored to work with Shimadzu and their instrumentation. “Front Range Biosciences is honored to partner with the world-class team at Shimadzu. Combining their innovative and proven cannabis and hemp analytical instrumentation solutions with our next-generation breeding program, we will be well positioned to continue advancing the industry with data-driven science so we can harness the incredible potential of this versatile plant for therapeutic, wellness, nutrition and industrial applications,” says Dr. Vaught. “We are confident that with Shimadzu’s cutting-edge technology, we will be able to drive forward-thinking solutions in this growing industry to better serve farmers, producers and consumers.”
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
