This presentation delves into why consumers want organic products, why going organic is good for the CBD industry and what would it take to become a certified organic brand.
Rapid Potency Screening by Fourier Transform near/mid Infrared Spectroscopy – TechTalk sponsored by PerkinElmer
A Guidance on an Integrated Lifecycle of Designing a Cultivation Operation
Gretchen Schimelpfenig, PE, Technical Director of Resource Innovation
Brandy Keen, Co-Founder & Sr. Technical Advisor, Surna, Inc.
Adam Chalasinski, Applications Engineer, Rough Brothers/Nexus Greenhouse Systems/Tetra
David Vaillencourt, Founder & CEO, The GMP Collective
Kyle Lisabeth, Vice President of Horticulture, Silver Bullet Water
Back by popular demand, this panel discussion is returning with the same cast of subject matter experts to foster a longer, more comprehensive dialogue on cultivation facility design. Designing a cannabis cultivation facility that can produce consistent quality cannabis, meets the demands of the business objectives (profit, time to market, scalability) and consumers and stays within budget and timelines has been a major pain point for new and seasoned business owners and growers. What appears on the surface as a simple proposition – build a structure, install HVAC and fertigation systems, hire a master grower, plant some seeds and watch the sea of green roll in — is anything but.
The Beginner’s Guide to Integrated Pest Management
David Perkins, Founder, Floresco Consulting
This presentation goes into detail on everything you need to know to get started with integrated pest management. Learn about planning and designing your cultivation facility to minimize pest pressure, how to apply pesticides safely and lawfully and pest identification, as well as choosing the correct pesticides.
Starting from Scratch: Launching a Hemp Farm in Georgia
Reginald “Reggie” Reese, Founder & CEO, The Green Toad Hemp Farm
Dwayne Hirsch, President & Chief of Business Development, The Green Toad Hemp Farm
This presentation discusses how The Green Toad Hemp Farm started with an empty lot with no water, power or structures and turned the space into a productive vertically integrated hemp cultivation operation. Learn how to work with local and state regulations from this case study in Southeast Georgia and learn how to operate with friends, not enemies: How building partnerships with your community can ensure business success.
National Agriculture Day (March 23, 2021), is an annual event held by the Agriculture Council of America (ACA), a not-for-profit 501-c (6) organization, to increase the public awareness of agriculture’s vital role in our society.
The ACA believes that every American should:
Understand how food and fiber products are produced.
Appreciate the role agriculture plays in providing safe, abundant and affordable products.
Value the essential role of agriculture in maintaining a strong economy.
Acknowledge and consider career opportunities in the agriculture, food and fiber industry.
We investigated how the hemp and cannabis industry is disrupting agriculture in positive ways, from automated trimming, to controlled environment agriculture, to water conservation and beyond. We interviewed Aaron McKellar, CEO and President of Eteros Technologies, parent company of Mobius Trimmer and Triminator, Mark Doherty, Executive Vice President of Operations, urban-gro, Inc. and Derek Smith, Executive Director at Resource Innovation Institute (RII) to get their perspective on agricultural innovation.
Aaron McKellar, CEO and President of Eteros Technologies
Aaron Green: Why is hand-trimming inefficient at scale?
Aaron McKellar: Hand-trimming is inefficient at scale because it is so labor-intensive and time-consuming, not to mention repetitive and frankly boring. It’s hard to stay fully engaged as a worker trimming by hand, so the consistency of your finished product isn’t reliable with a crew of hand-trimmers.
Aaron McKellar, CEO and President of Eteros Technologies
A hand-trimmer can produce good quality trim on about 2 or 3 pounds per day. A scaled-up facility running just one Mobius M108S Trimmer can realize up to 120 pounds per hour, replacing many dozens, or even into the hundreds of hand-trimmers. The HR nightmare this presents, and all the associated costs of paying and facilitating dozens of employees (parking, washrooms, lunchrooms, PPE and gowning, etc) is simply unworkable. And that’s before COVID.
Green: How does automated trimming benefit large producers and how does the quality compare to hand-trimming?
McKellar: Not all automated trimmers are created equal. Any of the machines out there will help to reduce the need for hand-trimmers by taking off the bulk of the leaf, leaving a small team of “hand-polishers” to finish it up. The Mobius Trimmer is the only automated trimmer on the market today that leaves the technology of the original machines in the past and employs next-gen technology to truly mimic hand-trimmed quality with stunning through-put rates.
We have high-end producers using Mobius Trimmers whose own QC department cannot discern Mobius-trimmed flower from hand-trimmed flower. Hand polishing crews tend to be far smaller when using a Mobius vs first-gen machinery, and many Mobius users don’t touch up at all, instead going straight to market right out of the trimmer. For a look at how our technology differs from the rest of the field, check out this look under the hood.
Mark Doherty, Executive Vice President of Operations, urban-gro, Inc.
Aaron Green: What is controlled environment agriculture?
Mark Doherty: Cannabis cultivators understand growing indoors because, prior to legalization, they had been doing it for years in the gray market. It is by way of that experience that cultivators learned how to manipulate a highly-valuable, complex plant in an indoor setting. As cannabis legalization spread across the United States, many government regulators required that it be cultivated indoors according to strict regulatory protocols. Fast forward 10 years, and we have an industry that is keenly aware of the indoor environmental conditions required to be successful. Critical factors like heating, cooling, ventilation, dehumidification, and how to best mimic Mother Nature’s energy through lighting are all deliberately optimized.
Mark Doherty, Executive Vice President of Operations, urban-gro, Inc.
With cannabis cultivation driving the advancements of controlled environment agriculture, market and regulatory forces demanded higher efficiency, reduced energy and resource consumption, and clean crops. In most states, cannabis crops have more stringent testing than food crops. For instance, the lettuce in Massachusetts will not pass the standards for cannabis in Massachusetts. It’s through rapid innovation and technology adoptions that the cannabis industry has paved the way for lettuce to be profitably grown indoors.
Green: How can controlled environment agriculture help alleviate supply chain stresses?
Doherty: By growing food closer to the consumer, you reduce food miles; meaning, that link in the food supply chain gets a lot shorter and is less prone to disruption. Whether you have hyper small cultivation facilities on every street corner, or a larger cultivation facility geographically close to consumers, you can grow 24/7/365. Furthermore, growing locally allows for better prediction of facility output—10 boxes of greens on Monday, 50 boxes of greens on Tuesday, and five boxes of greens on Thursday. This eliminates harvesting a large crop before it is ripe and likely requiring cold storage. The controllability of controlled environment ag is that consistent, reliable contribution to the food supply chain and shortening that path to the consumer.
Derek Smith, Executive Director at Resource Innovation Institute (RII)
Derek Smith, Executive Director at Resource Innovation Institute (RII)
Derek Smith: Until this report, if you searched for cannabis water usage, you’d basically find one cited statistic. It was “six gallons per plant per day.” We knew this was from a model based on one extreme illicit market scenario. Based on the data we were seeing and the conversations we were having, this number seemed way off. So, we pulled together a multidisciplinary Water Working Group as part of our Technical Advisory Council. The objective of the Water Working Group was to establish a scientific understanding of how, and how much, water is used for cannabis cultivation so that cultivators have confidence in taking steps to be more efficient, and so that industry leaders, governments and media can be accurately informed about the range of water practices of today’s regulated market.
Green: What key points should cannabis cultivators take away from the report? What key points should regulators and policymakers take away from the report?
Smith: As the cannabis industry matures, water use efficiency will become more important, as it has for other agricultural crops. Pressures to use water efficiently will mount from multiple channels including – reducing input and energy cost, protecting the environment, meeting regulatory standards and simply being good stewards. We recommend that industry and regulators focus efforts on the following areas:
When grown outdoors, water for cannabis production should be assessed like any other agricultural crop and be subject to state and local regulations that apply to other crops. Our research indicates that cannabis neither uses a massive share of water nor uses more water than other agricultural crops. Applying the same standards to cannabis as to other agricultural crops will correctly categorize outdoor grown cannabis as an agricultural crop.
In areas where there may be conflict between water use for cannabis and environmental concerns, regulators and the industry should focus (1) on the timing of water use and (2) the potential of storage to mitigate environmental conflict. Our results show that in many parts of the country legal cannabis farmers have ample water storage to satisfy their needs. In areas where storage is insufficient, increasing storage should be a priority for farmers and regulators.
Our research shows there are still massive differences between cannabis production techniques. As farmers continue to experiment and improve, we expect to see water use be a more important part of cannabis farming decisions and expect new plant varieties and growing techniques to be developed that increase water use efficiency. Yet more data from actual farms and facilities are needed to point the way toward the technologies and techniques that drive optimal efficiency and productivity. It is recommended that producers benchmark their performance and governments consider requiring energy and water reporting by producers. The Cannabis PowerScore can assist in these efforts.
As indoor production continues to grow, especially in areas that have unfavorable climatic conditions for outdoor growing, we expect more cannabis users to rely on municipal water sources. Yet, it is unclear if municipal water suppliers are equipped to work with the cannabis industry. We suggest outreach efforts between the cannabis industry and municipal water suppliers to incentivize efficiency where possible.
In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses integrate innovative practices in order to navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.
Large-scale agricultural practices can take a toll on soil health leading to inefficiencies over the long term. Harvey’s All Naturals is a Colorado-based company specializing in premium farm-to-table full spectrum CBD products. Harvey’s gets all of its hemp from Boot Ranch Farms, an off-grid sustainable hemp farm in Southern Colorado supplied by an artesian well.
We spoke with Harvey Craig, CEO Harvey’s All Naturals and co-founder of Boot Ranch Farms, to learn more about the benefits of regenerative agriculture, how he thinks about soil health, and how they produce their CBD products. Harvey started Boot Ranch Farms in 2014 after the passing of the Farm Bill and Harvey’s All Naturals followed shortly thereafter.
Aaron Green: How did you get involved in the cannabis and hemp industry?
Harvey Craig: I got involved at a very young age, as the youngest of eight kids, seven of which are boys, I was introduced to cannabis on the marijuana side first. As an engineer through the years, I’ve always been involved in creating very efficient growing systems for cannabis.
Harvey Craig, CEO Harvey’s All Naturals and co-founder of Boot Ranch Farms
In the early 2000s, I learned about CBD a little bit through experimenting with marijuana strains to help a friend who had Parkinson’s and also through the research performed by Raphael Mechoulem, an organic chemist and professor at the Hebrew University of Jerusalem in Israel. In 2014, when the Farm Bill made hemp legal, I dropped everything and went into it because I felt “this is what I need to be doing.”
Green: What is sustainable farming mean to you?
Craig: Sustainable farming to me means putting soil health and responsible natural growing practices at the forefront of all agriculture – regenerative processes for soil, in a nutshell. To me, soil health is one of the biggest problems in the United States right now. By regenerating and making our soils living, healthy and with a rich nutrient base we create an ecosystem that is good for human health and health all around.
Green: What do you mean specifically when you say, “soil health?”
Craig: Soil is living. A good natural soil has a living microbiotic structure inside it. There’s a living habitat that forms inside our soil over the years. Large scale agriculture in many cases has depleted or killed this living structure through readily accessible fertilizers and tilling practices.
Farmers understand the soil. There are practices we can undertake that are helping our living soils and helping the microbiotic habitat to thrive. Practices such as no-till technologies, rotating crops, using cover crops, not being a monocrop, responsible water use, healthy fertilizer and pesticide technologies, minimal processing, the list goes on and on…
When we talk about this thing called sustainability, I think it’s very important that we understand there are two sides of cannabis. There’s the marijuana and then there’s the hemp. We can’t put those two together – they’re governed very differently. Hemp became legal through the Farm Bill and is governed by the Department of Agriculture. Hemp is just like any other crop out there really. That means we can mix hemp in with other crops. It’s very much like corn and other crops in how it’s grown on a large scale, industrial basis.
Marijuana on the other hand is governed by each state’s regulatory commission. Those regulations make it very hard to mix in with general agriculture. So, when it comes to the marijuana side, unfortunately, it must be a monocrop. Most marijuana is grown in pots and pots are fine. However, if you are just growing in a pot and then throwing your soil away, that is not very sustainable. As it sits right now, in the marijuana industry there is really no sustainability, unfortunately. The energy use for the lights in indoor grows, for example, creates a huge carbon footprint and load on the electrical grid. I’m not trying to put indoor growing down, but that’s the way it is. The only way I foresee sustainability in the marijuana side of cannabis is to let loose a little bit on regulation and allow it to become a part of normal agricultural processes.
Green: What is it about tilling that degrades the soil quality?
Craig: When we till our soil, we’re turning the organisms in the soil up and we’re allowing the sun to dry them out. If it’s not done properly, you kill that soil structure.
Now, these little microorganisms in our soil create a healthy soil, but it doesn’t happen instantly, this takes years to create. Nobody has the time anymore, everybody’s “go go go” and “make it happen instantly”. So that gets destroyed. Now we have all these dead soils that everybody’s growing in and growers turn to factory-produced fertilizers with readily available nutrients.
When we are talking about cannabis, we can’t just look at monocropping. If you grow one crop in the same soil over and over, the soil is going to get depleted. One of the main things that we deplete is nitrogen and growing other crops, such as clover, can replenish that nitrogen. Growing cover crops protects the soil from the sun, creates nitrogen for the soil, and holds the water within the soil.
Instead of tilling, you can rotate with crops like root vegetables, radishes and other things that have deep root structures. Instead of tearing them up, just let them degrade organically and go back into the soil. Those deep root structures will also help aerate the soil.
Green: What is a farmer’s first approach?
Craig: Farmers want their land to be healthy. True farmers have a oneness with the earth and understand the earth. The farmer’s first approach keeps the farmer involved in creating new technologies for agriculture.
Green: Let’s say you’re a farmer that has land or recently acquired land that’s been industrially grown upon. How would you take that land and start fresh with a regenerative process?
Craig: The first thing you have to do is take soil samples and send them to a lab. That’ll tell you what you’re working with. Also, knowing a little history about the land helps as well. Was it used for grazing? Was it used for growing corn? What was it used for? Were organic practices used?
Then, there are many things you can do to start to regenerate your soil, but it takes time. In many situations, people don’t want to take that time. But what we’re learning is, the people and the farmers that do take that time often take a hit monetarily for the first two or three years. After that, once that structure is maintained, the natural health of the soil can be replenished. Crops will grow better, and they won’t spend as much money on fertilizers and pesticides in the long run because the microbiotic structure in the soil is creating a healthy ecosystem. When we destroy that ecosystem, it doesn’t come back easily or quickly. If there’s a little bit there, it can be regenerated with the right practices.
Green: I understand that the Boot Ranch is an off-the-grid farm. What was your motivation for either going off-grid or remaining off-grid?
Craig: I have a background in alternative energies and engineering, and when creating Boot Ranch Farms there was a lot that went into the sustainability side of it. The farm is extremely far away from the power grid for starters. So, an investment in solar for electricity was money well spent. My thought process was, why would I invest in bringing the wires in when I could actually save money and resources by creating a very efficient solar system and not be tied to the grid? Our farm is self-sustaining without being connected to any grid, which is one of the main reasons for remaining off-grid.
Green: I understand the farm is supplied by an artesian well. How do you monitor your water quality?
Craig: Well, we’re very fortunate. Existing natural water quality is one of the main reasons we decided to grow in the San Luis Valley. When you’re starting something new, you have to look at your financial side of things. Investing in a hemp farm is very different than the marijuana side because you won’t make as much money per pound of product sold. So, you have to watch your budget and not spend too much, or you’re never going to make a profit.
The self-sustaining artisanal well and water rights were existing on the property. There’s no pumping required for it and the water goes into a 10,000-gallon holding tank, where we can monitor and test for water quality. In order to water our plants, we use a pump/drip water system that supplies water to each individual plant. It’s very efficient compared to most watering systems out there, such as flood irrigation or pivots, and really doesn’t use a heck of a lot of water.
Green: Are you growing in open air or greenhouses?
Craig: We grow in two 3,000 square feet industrial-grade greenhouses at Boot Ranch Farms. Greenhouse One has all the bells and whistles including heating, cooling, light deprivation, supplemental lighting, automated controls and more. That greenhouse allows us to mimic Mother Nature a little bit. We can get up to six harvests throughout the course of the year in that greenhouse. However, in reality, we get about four.
In addition, we have a second greenhouse that is set about 100 feet away and set up to keep plants growing on mother nature’s cycle. We can move groups of mature plants to Greenhouse One after each harvest for multiple flowering cycles. Lastly, between greenhouses, we have a 10,000 square foot courtyard that’s protected with shade cloth and other things to help protect those plants from the elements. In late October, all remaining plants in both greenhouses and the courtyard become mature and ready to harvest due to shorter days created by mother nature.
Green: Do you insure your crops?
Craig: We have not. Hemp is a new industry and we have not found good crop insurance.
Green: Do you cultivate your own genetics?
Craig: We work with some other companies here in Colorado to provide genetics. Consistent genetics are extremely important on the hemp side because we need to trust that they are going to keep the THC levels down. On the marijuana side, that part doesn’t matter so much
There are different strains that have been created that I absolutely love, and I’ve tried to stick with them and stay with that seed stock. One of them is called The Wife and the other Cherry Wine. Most of the best hemp I have found is based upon the Cherry strain. People are always looking for high CBD. I’d rather have a lower CBD level in the 8% to 12% range. Something higher in the 14% to 20% range has a higher chance of producing a product with more than the legal amount of THC.
Green: Is Harvey’s All Naturals fully supplied by Boot Ranch Farms?
Craig: Yes, it is. There are a lot of things that go into a quality product and we focus on that at Boot Ranch. We’re small, not trying to compete with the large-scale market. Unfortunately, a high percentage of the products out on the market come from large-scale industrial hemp grows. We focus on long-term medicinal value and grow very high-quality hemp and we try not to degrade it in any way, shape or form throughout processing.
Green: How many square feet or acres is the Boot Ranch Farm?
Craig: Boot Ranch farm is about 260 acres. We only grow on less than three of it.
Green: What’s your extraction process?
Craig: We use cold alcohol extraction. We do not distill to separate our alcohol from the hemp oil. We use what’s called a roto vape. That cold processing preserves our terpenes, it preserves our full-spectrum cannabis oil profile and doesn’t fully decarboxylate our CBDa. We want a large CBDa percentage because there are many things that CBDa is good for when it comes to long term medicinal reasons.
Green: Are you processing your own hemp?
Craig: No, we sub that part of it out. What I’ve learned in this industry is three main parts: 1- the farming; 2- the extraction, and; 3- the product line. Those are three very separate processes and require specialized expertise within themselves. Each is a large investment and it’s very hard to do it all. I decided to work with other people on the extraction part of it. They have the expertise, and we pay them well to do what they do.
Green: Okay, great. And then any final words for Ag Day?
Craig: Support your small farmer in nutrient-rich agricultural products.
Green: Great. That concludes the interview, Harvey!
As cannabis legalization becomes more prolific across the United States, entrepreneurs are entering the cultivation business in droves. With so many new companies entering the market and growing cannabis, there are a lot of common errors made when getting started. Here are ten of the biggest mistakes you can make when building a cannabis grow facility:
Failure to consult with experts in the cannabis business – poor planning in floorplan and layout could create deficient workflow causing extra time and costing profits. Bad gardening procedures may result in crop failure and noncompliance could mean a loss of license. Way too often, people will draft a design and begin construction without taking the time to talk to an expert first. Some important questions to ask yourself and your consultant are: What materials should be used in the building of the grow? Is my bed-to-flower ratio correct? How long will it take before I can see my first harvest?
Contractor selection – DO NOT build your own facility; leave it to the experts. Sure, you have experience building things and you have a friend who has worked in construction. Do not make this mistake – Our experience can save you from the mistake’s others have made. To stay lucrative in this competitive industry and to maximize your products’ quality and yields, have the facility built right the first time. Paying an experienced, qualified cannabis professional to build you a facility will produce better yields and will save you time, stress and money in getting you from start of construction to your first crop.
Not maximizing your square footage potential – With today’s fast changing environment, multi-tiered stationary racks, rolling benches and archive style rolling racks help maximize square footage. Without the proper garden layout, you will find yourself pounds short of your potential each harvest.
Inadequate power – Not planning or finding out if there is sufficient power available at the site for your current and future needs. This will stop you from building the overall square footage you want. When finding a building make sure you first know how much power you will need for the size grow you want. With proper engineering you will find out what load requirements will be so you can plan accordingly.
Material selection – The construction material that goes into a cultivation and extraction facility should consist of nonabsorbent anti-microbial finishes. The days of wood grow benches are long gone. Epoxy flooring, metal studs and other materials are mandatory for a quality-built, long-lasting facility.
Hand watering – Once your facility is up and running, many people feel they have spent enough money and they can save by hiring people to water by hand, rather than going with an automated system to handle the watering and nutrients. The problem with this is your employees are not on your plants timetable. What if an employee calls off and can’t come into water at the right time or they mix the wrong amount of nutrients from the formula you have selected? These are issues we see a lot. It is critical to perform precise, scheduled watering and nutrient delivery to increase your yields.
Failure to monitor and automate – Automating your grow is important for controlling the light and fertigation schedules as well as data collection and is crucial to maximizing yields. Being able to do this remotely gives you peace of mind in that you can monitor your grow room temperature and humidity at all times and be notified when something is not right.
Poor climate – This can cause stunted growth, smaller harvests and test failures. Our experience has taken us to facilities that have had mold and mildew issue due to poor climate. Proper air balancing, additional dehumidification along with a proper cleaning procedure can get a facility back in working order. Installing proper climate control systems could save millions of dollars.
Choosing the wrong site or building – Not knowing the history of the building you are choosing to rent or buy can create logistical and monetary nightmares. The wrong site can be a distribution and marketing disaster. In the wrong building, exponentially more money is spent to bring that building up to the standards needed for successful production and yields. For example, bringing in the ceiling and the cleaning of an existing facility can be a great expense. If you do not know what you are looking at when you purchase, you may be in for months of unaccounted expenses and inaccurate timelines. This can be detrimental for companies and individuals that are on restricted timelines and have to start producing successful and continuous yields from a space that has to be converted into a prime grow facility.
Failure to maintain your facility – A dirty site creates an invitation for pests, workplace injuries, unhealthy working environment and equipment failure. Keeping the facility and equipment properly maintained with routine service will ensure efficiency, longevity of equipment life span and reduce mold and bacteria risk. Clean facilities = clean plants and better flower.
Flower continues to be the dominant product category in US cannabis sales. In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.
Maggie’s Farm is an integrated cannabis company based in Southern Colorado. Maggie’s Farm has seven adult-use and medical dispensaries and cultivates the vast majority of their flower on outdoor farms. All Maggie’s Farm products are sun-grown from seed in soil that is 100% custom-mixed onsite as well as spring-watered, slow-cured and hand-trimmed. Maggie’s Farm does not use any synthetic pesticides or growth hormones in its cultivation. In addition, for the past eight years, Maggie’s Farm has recently obtained Clean Green Certified®, a designation certifying organic standards and testing that mirrors the USDA organic certification. Maggie’s Farm was the first cultivator in Colorado to earn the Clean Green certification.
We spoke with Bill Conkling, Founder and CEO of Maggie’s Farm to learn more about the benefits of outdoor growing, localism and their Clean Green certification. Bill started Maggie’s Farm in 2010 after growing up on cattle ranches and farms in Colorado.
Aaron Green: Bill, thanks for taking the time today. Tell me a bit about how you got involved in the cannabis industry.
Bill Conkling: I am a native of southern Colorado. I was a medical caregiver back in the early days of legalization, and I saw an opportunity to vertically align after my first legal crop in 2010. I opened up the store in 2011. I’ve been a lifelong proponent of medical, recreational and adult use of marijuana.
I come from a background of farmers and I had worked on cattle ranches and farms throughout childhood. As soon as I graduated from college, I went back to work on a large cattle ranch in the four corners area [of southern Colorado]. That’s where I started to incorporate my indoor cultivation experience and skills with outdoor.
Aaron: What trends are you following in the cannabis industry?
Bill: I was one of the first medical operators to support legalization, so I have certainly followed legalization trends. I’ve looked at some other states in our region in terms of growth and legalization.
Bill Conkling, Founder and CEO of Maggie’s Farm
We’re trying to stay a regional supplier and producer so that we are locally grown. We believe the southwest of Colorado is optimal for outdoor cannabis cultivation.
At Maggie’s Farm, we have followed an organic trend from the beginning and I think that’s becoming more of a trend now. We recently received Clean Green certification to that effect. Our goal is to try to provide the healthiest product at a good value to the market.
I believe that all of the products that are made in the cannabis world come from the flower. Downstream products are only as good as their ingredients. It all starts with the flower. So, we focus on producing a clean, top-shelf quality flower that is produced outdoors.
Aaron: How do you define local?
Bill: Local is staying in the climate that is optimal with the least amount of carbon footprint to the earth. That also means trying to operate so that we’re not moving a lot of product across long distances.
We’re trying to set up farms that are in optimal climates. There is a two or three-state region that I believe is the optimal climate for outdoor marijuana cultivation in our country.
Aaron: What states are those specifically?
Bill: I think Colorado and New Mexico, primarily.
Aaron: What geographies is Maggie’s farm currently in?
Bill: We’re in southern Colorado. We don’t go into the plains of Colorado.
Aaron: So Colorado state only right now?
Bill: Yes. The wet mountain range is one of the mountain ranges that we are in. I’ve also cultivated in the La Plata mountain range.
Aaron: What specifically is it about that region that makes it conducive to cannabis growing?
Bill: I think if you get the right elevation and the right microclimates within those elevations, and you have the number of sunny days that Colorado offers in those areas – the intensity of the sunlight, and the cool nights – all those things are factors that coincide in these areas that we like to cultivate in.
Aaron: We’ve been talking about outdoor growth. Does Maggie’s do any indoor?
Bill: No. We’re essentially an outdoor farm. We do a little bit of breeding and we’ve got starter houses, greenhouses and hoop houses for that purpose. We’ve got one greenhouse that we use for some wholesale, but we are primarily outdoors.
Aaron: How do you go about selecting the genetics or evolving the genetics to meet your local environment, given that you’re growing outdoors?
Bill: A lot of it is honestly through testing and experimentation, historically. You just cultivate and harvest and see how the genetics performed, you know? You test, you take test inputs, you take customer reviews, and blind test results from the team and from the customers and you consider all those facts.
Aaron: Do you produce and use your own seeds or are you purchasing those?
Bill: We have done both. I think I’ve probably created somewhere north of 800 different strains at this point. So, we’ve got a huge seed bank. We do also buy from vendors and experiment with some of those genetics as well.
Aaron: Do you market your seeds in Colorado?“I don’t think that you can get anywhere near the terpene value indoors that you can outdoors.”
Bill: We do not.
Aaron: How did you settle on outdoor-only as the strategy for Maggie’s?
Bill: I believe outdoor is a premium flower. I think it has less impact on the earth. I think that there is a lot less pest mitigation than there is indoors, which makes it a healthier, cleaner product. You don’t have to mitigate the concentration of pests that you get in temperate climates of stagnant corners of greenhouses and buildings that you cultivate indoors. Therefore, you never get into the situations as often or as intensely, where you might have to really work hard at mitigating your pests. You can use the natural predator insects you can introduce and oftentimes they survive and they create their own climates and it’s a more natural, healthier product.
I don’t think that you can get anywhere near the terpene value indoors that you can outdoors. You just don’t have the value of the sun, which nothing compares to. You can hold up as many high wattage bulbs as you want and you don’t even pale to the sun and the effect that the sun has on the flower.
Aaron: What are some of the challenges of growing outdoors that you see frequently?
Bill: You have to be nimble. You can’t rely completely on a schedule. You’ve got to be able to shift around in your planting days and your harvest dates.
You’ve obviously got to be on your toes all the time for weather changes. Higher humidity years can tend to bring more insects or pests. Some years you’ve got higher winds than other years. This year, we had a snowstorm on September 9, which left nine inches of heavy wet snow on one of our farms. So, you’ve got to be nimble, very proactive and ready for those kinds of weather events that happen in very short notice.
Aaron: We mentioned Clean Green Certified® briefly. Can you explain more about the Clean Green certification and why that’s an important thing for you at Maggie’s?
Bill: The choice to become Clean Green Certified® was really an effort to validate the organic process that we have. We vetted out what we believe was and still is the premier, organic criteria certification endorsement in the market for cannabis. To this day, they really do an ethical, vetting-out process whereby if you fail the parts of any of the soils that are sent to federal-licensed labs, you do not get your endorsement. The owner of Clean Green also had a mother company that was an endorser of other agricultural products such as coffee, wheat and dairy.
Aaron: How would you compare Clean Green Certified® to USDA Organic?
Bill: Identical. When the federal government legalizes, we are poised to automatically convert to a USDA Organic certification and endorsement. The processes the founder and owner of Clean Green uses to test cannabis is the same process used to test other agricultural industries. For plants, he takes random samples of soils throughout a cultivation field and sends them to a federal-licensed lab where they test for impurities.
Aaron: Did you decide to get your Clean Green certification due to pulling from the market, or is this more something you decided to do internally as Maggie’s Farm?
Bill: I decided to do this internally. I wanted to be recognized for all of our organic efforts and I wanted to let people know that we have a safe product that doesn’t have synthetics in it. Even to this day, a lot of people in Colorado unlike the coastal states like maybe California are still pretty unaware of a Clean Green certification or even the fact that there is an organic process for cannabis or marijuana. So, it’s really just to let our customers know that there is value in a safe, healthy choice for them.
Aaron: What kind of products do you create at Maggie’s farm?
Bill: We grow flower. We are also a big producer of a very high-quality pre-roll. We are developing promoted products as well.
Aaron: Do you do fresh frozen?
Bill: We do some, yes.
Aaron: Are you selling direct to the dispensary or to manufacturers?
Bill: We finally had produced some excess. So, we started wholesaling flower this year and lots of high-quality shake for concentrates to concentrate makers. Our customer is typically a little more of a mature customer. I don’t want to say necessarily older, but I think we probably do hit a little bit of a higher, more experienced, health-conscious, connoisseur customer.
Aaron: Can you give me an idea of some of the regulatory challenges in Colorado that you’ve faced in the past or are facing today?
Bill: The perpetual change of regulation has been a challenge. Being a competent operator in cannabis means getting used to the change and having the resources to be nimble with compliance. We haven’t had common problems such as metals, mold or mildew issues. However, we have had some hardware issues, which required us to change cameras along with other technical intricacies.
Aaron: How many acres do you have?
Bill: We have about 30 acres of secured premise cultivation.
Aaron: Is that all managed in-house or sublet?
Bill: It’s all managed and operated exclusively by Maggie’s Farm.
Aaron: What’s next for Maggie’s Farm? What are you excited about?
Bill: We want to continue to put a higher scale of a very healthy, quality, value flower out there and to be able to offer that to more states initially states that are within our region and eventually states across the US. Also, we will continue to do our best to meet the growing demand for healthier choices in general.
Aaron: Lastly, what are you personally interested in learning more about?
Bill: How we can continue to be as earth-conscious as we can be? How we can continue to look for ways to give back to our communities? How we can continue to operate as a view of made in the USA and to try to just support local regional and national products and vendors? Just how to be more aware and always look for opportunities for self-improvement.
Aaron: That concludes the interview, thank you Bill!
Flower continues to be the dominant product category in US cannabis sales. In this “Flower-Side Chats” series of articles Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.
Connected is a vertically-integrated cannabis company based out of Sacramento, CA and one of the most sought-after brands in California and Arizona. Having formed as a legacy operation in 2009, Connected has created a cult-like following over more than a decade in business. According to BDS Analytics, Connected Cannabis and their acquired brand Alien Labs now boasts the highest wholesale flower price in any major legal market – their average indoor flower wholesale price is 2x the CA average – yet also has the highest flower retail revenue.
We spoke with Sam Ghods, CEO of Connected to learn more about his transition from tech to cannabis, how Connected thinks about product and his vision for future growth. Sam joined Connected in 2018 after getting to know the founders. Prior to Connected, Sam was a co-founder at Box where he stayed on for 3 years after their successful IPO.
Aaron Green: How did you get involved in the cannabis industry?
Sam Ghods: I originally came from the tech industry. I co-founded Box, a cloud sharing and storage company, in the mid 2000s with three other friends. We grew that from the four of us to eventually a multi-billion-dollar public offering in 2015. I stayed on a few more years after that until I took some time off trying to decide what I wanted to do next. I looked at a number of different industries and companies, but personally I always had a real passion for artisan and craft consumer goods. It’s a really big hobby of mine. Whether it’s going to Napa or learning about different kinds of premium consumer goods, I really had a deep love and never knew cannabis could be like that.
When I first met Caleb, the co-founder of Connected, he instantly got my attention by telling me that they had been selling out of their product in the volume of millions of dollars a year at more than two times what everybody else was selling for. That really piqued my interest because creating a product that has that level of consumer passion and demand is maybe the single hardest thing about building a consumer goods business. For them to have been so successful in what was a very difficult and gray market to operate in at the time – this was mid 2018 that I was speaking with him and he had been building this company since 2009 – is a really big challenge, and really impressive.
Sam Ghods, CEO of Connected
So, I started spending time with Caleb and the Connected team and learned a lot about the business. Everything I learned got me more interested and more excited. The way that they thought about the product, the way they treated it was with a reverence and level of sophistication I had no idea was possible.
I was so excited to just learn about the space. I mean, honestly, it feels like the internet in the 90’s- The sheer possibility and excitement. The only difference here is that the market already has existed for 100 years plus: the gray and underground markets for this product are actually phenomenally mature. And now we’re lifting up billions of dollars in commerce that’s already occurring and attempting to legalize all of it in one fell swoop, which creates such an interesting set of challenges.
I first got involved as an advisor on fundraising and strategy. And then a few months later, they were looking for a CEO and I joined full time as CEO in September 2018.
Aaron: What trends in the industry are you focused on?
Sam: It may seem basic, but I think product quality in the broader cannabis markets nationally and internationally is really underrated. Because of the extreme weight of the regulatory frameworks in so many different markets, it’s resulting in a lot of product being grown and sold just because it can be by the operators that are doing it. In many markets, they count the number of producers by the handful, instead of being measured in hundreds or thousands like in California or Oregon. And in that kind of environment, you’re not really having competition, and you’re not really able to see the quality that has existed in this category for years and years and years.
That’s one of the things that really sets us apart – the quality is first above all else, as well as the innovation and time that has gone into it, and not many existing brands in the legal market can say that. With some of the “premium” brands on the market, it would be comparable to just jumping into the wine industry one day and thinking that you can become a premium brand, without having any knowledge of the history of the product or the industry itself. At Connected, we have a team that’s been doing this for over a decade. We did a back of the envelope calculation: there’s over one thousand lifetime harvests between our team. We’ve also brought in specialists from Big Ag and other industries to complement that experience.
Cannabis is a very, very difficult plant to grow at a very high level. It’s much more like high-end wine or spirits than other fruit or produce. I think in the cannabis community, that’s extremely acknowledged, and appreciation for that is the reason we get by with the highest prices in the legal market. I think in the broader investor and financial community, this point hasn’t really hit home, because the limited license markets aren’t mature enough, and there isn’t enough competition in many of them.
Our focus is continuing to make the best product we can, which has fed and developed our brands [Connected and Alien Labs] into what they are today. That is our number one focus, and we think it’s pretty unique to the space of not just cultivating a great quality product, but also as far as breeding, pushing the bar higher and higher on what can be done with the genetics of the plant.
Aaron: How do you think about choosing testing labs?
Sam: So, the number one criterion is responsibility and compliance. We must be completely confident that they’re testing accurately, safely and exactly to the specifications of the state. Then from there, it is really cultivating about a partnership. There’s a lot of nuance in the relationship with a testing lab. We note things like: Are they responsive? Are they sensitive to our needs in terms of either timelines or requirements we have? It does come down to timelines and costs to a certain extent, like who’s able to deliver the best service for the best cost, but it really is a partnership where you’re working together to deliver a great product. Reliability and consistency are big pieces as well.
Aaron: Industry estimates for illicit market activities are something like 60% of the California market. From your perspective, how do we fix that?
Sam: I think it probably comes down to funding for the efforts to discontinue those activities and opening up the barrier to entry, incentivizing “illegal” operators to make the investment in the cross-over. I think the most successful attempts to tamp it down was when there were initiatives that were well-orchestrated and well-funded, allowing for legacy growers to actually cross over to the “legal” industry. You can’t launch an industry with such an extreme amount of regulation, set a miles-high barrier to entry, and then penalize legacy growers for continuing their business as-is. If the illicit market continues to be fueled by rejection, you’re not going to achieve the tax revenue that you’re expecting to see, that we all want to see. There needs to be an attitude that every dollar put into transitioning illicit markets into regulated markets is returned many times over in tax revenue to the state’s citizens.
Aaron: So, I understand you sell wholesale. Do you sell direct to consumer?“Once they hit the shelves, we blow people away again, beyond their expectations of what they had before.”
Sam: We own and operate three retail stores, so we do sell direct to our consumers, but at this point the majority of our product is sold through third party dispensaries.
Aaron: Do you make fresh frozen?
Sam: We do. On the cultivation side we have indoor, mixed light and outdoor. We fresh freeze a portion of our outdoor harvest every year, and then we use that fresh frozen for our live resin products, for example, our recent live resin cartridge. It creates a vape experience really unlike any other because we are using our regular market-ready flower, but instead we’re taking that flower and actually extracting, not just using the distillate and mixing a batch of terpenes with it. We extract the entire plant’s content across the board, from cannabinoids to terpenoids and everything in between, and then you have our live resin cartridges.
Aaron: How do you think about brand identity and leveraging the brand to command higher prices?
Sam: The cycle we’ve effectively created is that every time we do a release of a new strain or a new batch or harvest, the quality is generally going up. That quality is released under our brands, and then the customer is able to associate that increase in quality and reputation with those brands. Then for our next launch, we have an even bigger platform to talk about the products and to ship and distribute and sell the products. Once they hit the shelves, we blow people away again, beyond their expectations of what they had before. That continuous cycle keeps fortifying the brand and fortifying the product. From our perspective the brand is built 100% on the quality of the product. The product will always be our highest priority and the brand will come downstream from that.
Aaron: Tell me about Alien Labs.
Sam: Alien Labs was an acquisition. It was a company that had built their brand really successfully in the gray market through 2017 and Prop 215 in California and had an incredible level of quality, a really loyal and dedicated fan base, not to mention a tremendous Instagram presence and following, which is where 98% of cannabis marketing happens today. We really loved the spirit of what the founders were bringing to the table. In 2018, we decided basically to join forces with them and bring them on board, creating a partnership where they leverage our infrastructure and the systems and processes we’ve built, but still keep their way of cultivation and their product vision. To this day, Ted Lidie, one of the founders, continues as the lead brand director for Alien Labs.
Aaron: In what geographies do you currently operate?
Sam: Our primary offices and facilities are based out of Sacramento, California, but we have facilities throughout the state. Last year, for the first time we launched operations in a new state, Arizona. As you may know, you’re not allowed to take cannabis products across state lines at all, so if you want consistent product in multiple markets you really have no choice but to rebuild your entire infrastructure in each state you want to open up.
There are many brands that are expanding and launching in more markets more quickly, but they’re doing so by taking product that’s already existing and putting their brand name on it. That is something we’ve decided strategically that we will not do. We’ve spent years building a high level of trust with our customers, so we’re only going to put our brand name on products that are our genetics, our cultivation, our style, our quality of product. When we launched in Arizona, we did it with a facility that we leased and took over and now operate with our staff. We’re replicating the same exact product that you can get in California in Arizona, which is really exciting.
We launched just this past November, which has been incredibly successful. Our dispensary partner Harvest saw lines of dozens of people out the door.“We consider ourselves a flower company first and foremost, so for us, that was a very calculated strategic move.”
Aaron: Any new geographies on the horizon that you can talk about?
Sam: We’re constantly evaluating new opportunities. I don’t have anything particularly specific to announce right now, but I will say we look for states where we believe there’s a competitive environment where the product quality is going to really stand out and be appreciated.
Aaron: Do you notice any differences in consumer trends between California and Arizona that stand out?
Sam: Not too many yet. We don’t have a retail location in Arizona, so we don’t have as much direct contact. However, we have heard consistently that the Connected customer demographics – as you would imagine most interested in our product – are those looking for something special, unique, different and have a really superior quality to everything else out there. We ended up launching in Arizona with the highest price point for flower in the state, and we say that’s just the beginning. The market is still so young and immature, both nationally and internationally, that this category is going to develop into one that’s really taste-driven.
Aaron: What’s next in California?
Sam: Continued growth and product development. We want to keep blowing away our customers with more and more incredible products, different product types and categories. For example, the cartridges were a really big launch for us because we don’t really consider ourselves a vape company. We consider ourselves a flower company first and foremost, so for us, that was a very calculated strategic move. We were only going to launch the product if we could fully replicate what the consumer gets from the flower experience. We are very unlikely to ever release a distillate pen, for example.
Aaron: What are you personally interested in learning more about?
Sam: We, as a society, really don’t know very much about the cannabis plant. Pretty much all meaningful research around cannabis stopped in the early 1900’s with prohibition. In the meantime, we’ve performed millions of dollars of studies and research on almost every other plant that we grow commercially. We understand these plants extraordinarily well. Cannabis science is stuck back in agriculture of early 1900s. The most interesting conversations I have are around how the plant works, how it doesn’t work and the ways in which it is so different from all other plants with which we are familiar. Our head of cultivation comes from Driscolls, the largest berry company in the world, and even he is frequently surprised by the way the cannabis plant reacts to things that are commonly understood in other plants. So, the way the actual plant responds to different environments is truly fascinating and something I think we’ll be learning about for decades and decades to come.
Aaron: Okay, great. That concludes the interview. Thank you, Sam!
Editor’s Note: This is an excerpt from chapter ten of From Seed to Success: How to Launch a Great Cannabis Cultivation Business in Record Time by Ryan Douglas. Douglas is founder of Ryan Douglas Cultivation, a cannabis cultivation consulting firm. He was Master Grower from 2013-2016 for Tweed, Inc., Canada’s largest licensed producer of medical cannabis and the flagship subsidiary of Canopy Growth Corporation.
Cultivation businesses should consider specializing in just one stage of the cannabis cultivation process. The industry has focused heavily on vertical integration, and some regulating bodies require licensees to control the entire cannabis value chain from cultivation and processing to retail. This requirement is not always in the best interest of the consumer or the business, and will likely change as the industry evolves. Not only will companies specialize in each step of the value chain, but we’ll see even further segmentation among growers that choose to focus on just one step of the cultivation process. Cannabis businesses that want to position themselves for future success should identify their strengths in the crop production process and consider specializing in just one part.
Ryan Douglas, former Master Grower for Tweed and author of From Seed to Success: How to Launch a Great Cannabis Cultivation Business in Record Time
Elsewhere in commercial horticulture, specialization is the norm. It is unlikely that the begonias you bought at your local garden shop spent their entire life inside that greenhouse. More likely, the plant spent time hopping between specialists in the production chain before landing on the retail shelf. One grower typically handles stock plant production and serves as a rooting station for vegetative cuttings. From there, rooted cuttings are shipped to a grower that cares for the plants during the vegetative stage. Once they’re an appropriate height for flowering, they’re shipped to the last grower to flower out and sell to retailers.
Cannabis businesses should consider imitating this model as a way to ensure competitiveness in the future. In the US, federal law does not yet allow for the interstate transport of plants containing THC, but the process can be segmented within states where vertical integration is not a requirement. As we look ahead to full federal legalization in the US, we should anticipate companies abandoning the vertical integration model in favor of specialization. In countries where cannabis cultivation is federally legal, entrepreneurs should consider specialization from the moment they begin planning their business.
Cultivators that specialize in breeding and genetics could sell seeds, rooted cuttings, and tissue culture services to commercial growers. Royalties could provide a recurring source of income after the initial sale of seeds or young plants. Contracting propagation activities to a specialist can result in consistently clean rooted cuttings that arrive certified disease-free at roughly ¼ the cost of producing them in-house. This not only frees up space at the recipient’s greenhouse and saves them money, but it eliminates the risks inherent in traditional mother plant and cloning processes. If a mother plant becomes infected, all future generations will exhibit that disease, and the time, money, energy, labor, and space required to maintain healthy stock plants is substantial. Growers that focus on large scale cultivation would do well to outsource this critical step.
From Seed to Success: How to Launch a Great Cannabis Cultivation Business in Record Time
Intermediary growers could specialize in growing out seeds and rooted cuttings into mature plants that are ready to flower. These growers would develop this starter material into healthy plants with a strong, vigorous root system. They would also treat the plants with beneficial insects and inoculate the crop with various biological agents to decrease the plant’s susceptibility to pest and disease infestations. Plants would stay with this grower until they are about six to 18 inches in height—the appropriate size to initiate flowering.
The final stage in the process would be the flower grower. Monetarily, this is the most valuable stage in the cultivation process, but it’s also the most expensive. This facility would have the proper lighting, plant support infrastructure, and environmental controls to ensure that critical grow parameters can be tightly maintained throughout the flowering cycle. The grower would be an expert in managing late-stage insect and disease outbreaks, and they would be cautious not to apply anything to the flower that would later show up on a certificate of analysis (COA), rendering the crop unsaleable. This last stage would also handle all harvest and post-harvest activities—since shipping a finished crop to another location is inefficient and could potentially damage the plants.
As the cannabis cultivation industry normalizes, so, too, will the process by which the product is produced. Entrepreneurs keen on carving out a future in the industry should focus on one stage of the cultivation process, and excel at it.
The cannabis industry is growing and evolving at an unprecedented pace and regulators, consumers and businesses continually struggle to keep up.
Cannabis businesses: How do you maintain an edge on the market, avoid costly mistakes?
Case Study: Costly Facility Build Out Oversights
David Vaillencourt will be joining a panel discussion, Integrated Lifecycle of Designing a Cultivation Operation, on December 22 during the Cannabis Quality Virtual Conference. Click here to register. A vertically integrated multi-state operator wants to produce edibles. The state requires adherence to food safety practices (side note – even if the state did not, adherence to food safety practices should be considered as a major facility and operational requirement). They are already successfully producing flower, tinctures and other oil derivatives. Their architect and MEP firm works with them to design a commercial kitchen for the production of safe edibles. The layout is confirmed, the equipment is specified – everything from storage racks, an oven and exhaust hoods, to food-grade tables. The concrete is poured and walls are constructed. The local health authority comes in to inspect the construction progress, who happens to have a background in industrial food-grade facilities (think General Mills). They remind the company that they must have three-compartment sinks with hot running water for effective cleaning and sanitation, known as clean-out-of-place (COP). The result? Partial demolition of the floor to run pipeline, and a retrofit to make room for the larger sinks, including redoing electrical work and a contentious team debate about the size of the existing equipment that was designed to fit ‘just right.’
Unfortunately, this is just one more common story our team recently witnessed. In this article, I outline a few recommendations and a process (Quality by Design) that could have reduced this and many other issues. For some, following the process may just be the difference between being profitable or going out of business in 2021.
The benefits of Quality by Design are tangible and measurable:
Reduce mistakes that lead to costly re-work
Mitigate inefficient operational flow
Reduce the risk of cross-contamination and product mix-ups. It happens all the time without carefully laid out processes.
Eliminate bottlenecks in your production process
Mitigate the risk of a major recall.
The solution is in the process
Regardless of whether you fall in the category of a food producer, manufacturer of infused products (MIP), food producers, re-packager or even a cultivator, consider the following and ask these questions as a team.
People
By standardizing and documenting safety procedures, manufacturers mitigate the risk of cannabis-specific concerns
For every process, who is performing it? This may be a single individual or the role of specific people as defined in a job description.
Does the individual(s) performing the process have sufficient education and training? Do you have a diverse team that can provide different perspectives? World class operations are not developed in a vacuum, but rather with a team. Encourage healthy discourse and dialogue.
Process
Is the process defined? Perhaps in a standard operating procedure (SOP) or work instruction (WI). This is not the general guidance an equipment vendor provided you with, this is your process.
How well do you know your process? Does your SOP or WI specify (with numbers) how long to run the piece of equipment, the specification of the raw materials used (or not used) during the process, and what defines a successful output?
Do you have a system in place for when things deviate from the process? Processes are not foolproof. Do not get hung up on deviations from the process, but don’t turn a blind eye to them. Record and monitor them. In time, they will show you clear opportunities for improvement, preventing major catastrophes.
Materials
What are the raw materials being used? Where are they coming from (who is your supplier and how did you qualify them)?
Start with the raw materials that create your product or touch your product at all stages of the process. We have seen many cases where cannabis oils fail for heavy metals, specifically lead. Extractors are quick to blame the cultivator and their nutrients, as cannabis is a very effective phytoremediator (it uptakes heavy metals and toxins from soil substrate). The more likely culprit – your glassware! Storing cannabis oil, both work in process or final product in glass jars, while preferred over plastic, requires due diligence on the provider of your glassware. If they change the factory in which it is produced, will you be notified? Stipulate this in your contract. Don’t find yourself in the next cannabis lead recall that gets the attention of the FDA.
Savings is gained through simple control of your raw materials. Variability in your raw material going into the extractor is inevitable, but the more you can do to standardize the quality of your inputs, the less work re-formulating needs to be done downstream. Eliminate the constant need to troubleshoot why yields are lower than expected, or worst case, having to rerun or throw an entire batch out because it was “hot” (either too much THC in the hemp/CBD space or pesticides/heavy metals). These all add up to significant downstream bottlenecks – underutilized equipment, inefficient staff (increase in labor cost) all because of a lack of upstream controls. Use your current process as a starting point, but implement a quality system to drive improvement in operational efficiency and watch your top line grow while your bottom-line decreases.
Consistency in quality standards requires meticulous SOPs
Have you tested and confirmed the quality of your raw material? This isn’t just does it have THC and is it cannabis, but is it a certain particle size, moisture level, etc.? Again, define the quality of your raw materials (specifications) and test for it.
Remember – ranges are your friend. It is much better to say 9-13% moisture than “about 10%”. For your most diligent extractor, 11% will be unacceptable, but for a guy that just wants to get the job done, 13% just may do!
Test your final product AFTER the process. Again, how does it stack up against your specifications? You may need to have multiple specifications based on different types of raw material. Perhaps one strain with a certain range of cannabinoids and terpenes can be expected for production.
Review the data and trend it. Are you getting lower yields than normal? This may be due to an issue with the equipment, maybe a blockage has formed somewhere, a valve is loose, and simple preventive maintenance will get you back up and running. Or, it could be that the raw biomass quality has changed. Either way, having that data available for review and analysis will allow you to identify the root cause and prevent a surprise failure of your equipment. Murphy’s law applies to the cannabis industry too.
You are able to predict and prevent most failures before they occur
You increase the longevity of your equipment
You are able to predict with a level of confidence – imagine estimating how much product you will product next month and hitting that target – every time!
Business risks are significantly mitigated – a process that spews out metal, concentrates heavy metals or does not kill microbes that were in the raw material is an expensive mistake.
Your employees don’t feel like they are running around with their hair on fire all the time. It’s expensive to train new employees. Reduce your turnover with a less stressed-out team.
Takeaways
Maintaining a competitive edge in the cannabis industry is not easy, but it can be made easier with the right team, tools and data. Our recommendations boil down to a few simple steps:
Make sure you have a chemical or mechanical engineer to understand, optimize and standardize your process (you should have one of these on staff permanently!)
Implement a testing program for all raw materials
Test your raw materials – cannabis flower, solvents, additives, etc. before using. Work with your team to understand what you should and should not test for, and the frequency for doing so. Some materials/vendors are likely more consistent or reliable than others. Test the less reliable ones more frequently (or even every time!)
Test your final product after you extract it – Just because your local regulatory body does not require a certain test, it does not mean you should not look for it. Anything that you specified wanting the product to achieve needs to be tested at an established frequency (and this does not necessarily need to be every batch).
Repeat, and record all of your extraction parameters.
Review, approve and set a system in place for monitoring any changes.
Congratulations, you have just gone through the process of validating your operation. You may now begin to realize the benefits of validating your operation, from your personnel to your equipment and processes.
In May 2019, there were 4,400 reports of tornadoes, hail and high winds across the U.S. That’s the highest number of similar weather incidents on record since 2011. This increasing number of weather incidents has a huge effect on the cannabis industry, which has turned more frequently to outdoor cultivation since legalization.
While outdoor cultivation can develop the flavor of the cannabis crop, much like wine, it also brings with it some unique challenges. Each component of the weather – wind, rain, temperature – plays a role in whether a crop succeeds or fails. While conditions one year may easily lead to a bumper crop, the conditions the following year may not be as favorable. And as the weather becomes more volatile due to climate change, growers are ever more at risk, especially when they aren’t insured.
Evan Stait, author and commercial account executive for HUB International
Unfortunately, traditional crop insurance isn’t available for outdoor cannabis cultivators, primarily because of a lack of data on yield performances – and the impact the weather has on yields. Insurance companies don’t create policies until they have the data to back the policy. But meanwhile, the growers are assuming all the risk.
Enter parametric insurance. Parametric insurance is a program that pays out after a certain parameter is met. In the case of cannabis growers, the parameters are weather-related. The policy is triggered when the weather varies from the average – if there is too much rain during a specific period of time, for example, or an occurrence of large hail. Because the policy is related to average weather, it has to be tailored to the specific growing region – which means the parameters for Colorado won’t be the same as a policy for Maine.
For cannabis crops, coverage can be created for the following parameters:
Rain (recorded in inches of rainfall over a period of time)
Wind (recorded in miles per hour)
Early freezing (using recorded temperatures)
Hail (measures intensity and size of the hail)
Drought (for non-irrigated plots)
Once a parameter has been set, the policy starts to pay out at the strike point, or the average measurement specified in the policy. Coverage continues to pay out until the exhaust point, or the entire limit of the coverage is paid out. It works well because it’s straightforward: The further away from the average, the more the likelihood of catastrophic loss.
Parametric insurance isn’t for everyone. It’s a program designed to fill gaps that exist within the traditional insurance system. Nor is it designed to stand alone. But it can protect outdoor cannabis cultivators from weather risks that are truly beyond their control, especially given the hardening property insurance market.
In addition, it works for two simple reasons:
Simplicity: Recorded weather events leave no room for ambiguity or dispute. You don’t even need an adjuster to guide the claims process. The official weather data proves what happened.
Correlation: There is a high degree of correlation between measurable weather events and potential damage to outdoor crops.
Parametric coverage is not widely available. Many insurance professionals may not even know of it. But with the property insurance market hardening and a growing need to protect you and your cannabis business from weather-related disaster, parametric coverage may be your best bet. Make sure you speak to a broker who knows about it.
Communication is key for efficient interaction between cultivation and business functions at any cannabis operator. So, what are the top four things cultivation directors should be discussing with their operations manager right now, as we face an uncertain Summer 2020 and unique COVID-related challenges (product demand uncertainty, reduced workforce, and immediate response to problems and issues):
Labor requirements
Operators should be discussing “Who, and what, do I need to operate this facility and how do I make operations more streamlined without diminishing quality, consistency, and yield?”
Efficient operations should focus on labor workflow and circulation and document a clear understanding of how employees will move through the spaces while doing their jobs.
Having a “less labor” philosophy and understanding—a ‘first in and first out’ mentality—drives down cost of production.
By limiting employees’ need to cross paths and segregating processes (e.g. harvest, distro, packaging) in a facility, you can maintain biosecurity and limit the risks of cross-contamination
When working with fewer staff members, everyone should be trained to:
A greenhouse facility that urban-gro helped bring to operation.
Operate all necessary equipment
Perform keys tasks like nutrient deliver or preventative maintenance
Supply chain
What sort of products do I use to cultivate, process, distribute and how will potential shortages affect my use/cost related to these?
Consider products and supplies that you can order in bulk
Examine and update your chemical regime to focus on products that are cheaper to freight ship, and located within the US or even your state
Mitigate the risk of availability by using products that are have no shelf-life or expiration issues, and those where the supply chain has not yet had disruptions
Automation and technology
What’s the availability to allow for remote monitoring and controls?
Cultivators can take some of the load off the reduced staff by automating critical tasks
Remote monitoring solutions will also allow for faster notification of crop issues
Integrating preventative maintenance tasks like equipment schedules and maintenance can increase efficiency
Yield expectations
Ensure that conversations on yield expectations are as transparent as possible and set realistic and achievable goals
Build business models based on the correct numbers that take into account productions numbers on ‘high yield’ genetics versus lower-yielding plants (yield versus price)
Ensure you have a detailed plan that combines both plant density and production goals
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
