Tag Archives: extraction

Disposable Gloves: The Unregulated Cannabis Threat

By Lynda Ronaldson
No Comments

Today in the states where medical and recreational cannabis is legal, cannabis products purchased from licensed facilities are required to have undergone testing by accredited labs. The compliance testing verifies advertised potency levels and checks for microbial contamination, herbicides, pesticides, fungicides and the presence of mold and mildew, among other potential contaminants.

Until recently, little attention has been given to disposable gloves and their possible involvement in the contamination of the products they handle.  What factors should you consider when purchasing gloves?

Disposable Gloves Facts

Disposable gloves, like cannabis products, are not made of equal quality. There are several different types of disposable gloves on the market, and huge variations in glove quality and chemical compositions exist between and within each glove type.

Recent scientific studies have revealed how gloves produced in factories with poor manufacturing standards and raw material ingredients can contaminate the products they handle. High-level toxins in disposable gloves were found to affect lab results, toxins in gloves contaminated the food they touched, and pathogen contamination of unused disposable gloves has been proven. Should the cannabis industry take more interest in the disposable gloves they are using? With so much at stake if compliance test results are compromised, we think so!

Glove Procurement: Factors to Consider

What factors should you consider when purchasing gloves?

  1. Industrial grade gloves- There is no such thing as an industrial grade glove certification, although it does give an incorrect impression that gloves are strong and resilient. Industrial grade means they have not been subjected to inspection nor have passed any specific testing requirements.
  2. Food contact gloves are certified under FDA Title 21 CFR Part 177, which states the components of the glove comply with the FDA regulations and the gloves consist of “substances generally recognized as safe for use in food or food packaging.” Few controls exist for glove manufacturing relating to the reliability of raw materials and manufacturing processes, and costs can be reduced with the use of cheap, toxic materials.
  3. Medical grade gloves have to pass a series of technical tests in order to meet the safety requirements specified by the FDA. Gloves are tested for puncture and abrasion resistance, must meet tension and elongation tests and are also tested for chemical substance resistance. Manufacturers of these gloves must receive 510k certification. As this study shows, even medical gloves can contain high levels of toxic ingredients, affecting laboratory test results.
  4. The Acceptable Quality Level (AQL) refers to a quality standard for measuring pinhole defects- the lower the AQL, the less defects the gloves have. There are no AQL requirements for food grade or industrial grade gloves, meaning there are no guidelines for the number of failures per box. Medical grade gloves must have an AQL of 2.5 or less, meaning 2.5 failed gloves per 100 gloves is an acceptable level.
  5. For Californian cannabis companies, are your disposable gloves Prop. 65 compliant? Accelerator chemicals, such as 2-Mercaptobenzothiazole (MBT) found in some nitrile gloves, have recently been added to the Prop. 65 chemicals known to cause cancer.

How Gloves Can Contaminate Products

Physical, chemical and microbiological hazards have been identified in disposable glove supply chains. Gloves of any grade are not tested for cleanliness (microbial and bioburden levels), raw material toxicity and chemical composition, or pathogen contamination.

100% of glove factories supplying the United States are based in Southeast Asia. These factories are generally self­-regulated, with FDA compliance required for a rough outline of the ingredients of the gloves rather than the final product. Few controls are required for glove manufacturing relating to the reliability of raw materials, manufacturing processes and factory compliance or conditions. A clear opportunity exists for accidental or intentional contamination within the glove-making process, especially to reduce costs.

In order to safeguard their customers from product contamination, a selection of tests and certifications, some of which are unique within the glove industry, are being implemented by glove supplier Eagle Protect. These tests make sure Eagle’s gloves coming into the United States are made in clean, well run factories, free of any type of contamination and are consistent in material makeup to original food safe specifications. This glove Fingerprint testing program, consists of a number of proprietary risk reduction steps and targeted third-party testing methods, includes gas chromatography combined with mass spectroscopy (GC/MS); surface free energy determination; in vitro cytotoxicity analysis; and microbial viability-linked metagenomic analysis.

With a great deal of faith placed on a glove supplier’s ability to deliver disposable gloves sight unseen, we believe these tests are essential to further reduce risks or pathogen contamination associated with them, keeping your cannabis products safe.

FDAlogo
Biros' Blog

FDA Public Hearing On Hemp: What You Need To Know

By Aaron G. Biros
2 Comments
FDAlogo

Folks from around the country and the world tuned into the U.S. Food & Drug Administration (FDA) website as they held a public hearing on Friday, May 31. Manufacturers and suppliers asked the FDA to regulate CBD like food or dietary supplements, while the FDA seemed to want more evidence on the safety of CBD products before giving the greenlight.

Background On The HearingFDAlogo

For the uninitiated, after President Trump signed the Farm Bill into law back in December 2018, Scott Gottlieb, now former director of the FDA, issued a statement the same day the Farm Bill passed, clarifying the FDA’s regulatory authority. In the statement, Gottlieb explained that Congress preserved the FDA’s authority to regulate products containing cannabis and its constituents under the Federal Food, Drug, and Cosmetic Act (FD&C Act).

In April 2019, around the same time he resigned from the FDA, Gottlieb issued another statement, acknowledging the quickly growing industry throughout the country and total lack of federal regulatory guidance. This time around, Gottlieb laid out a handful of steps that the FDA plans on taking to address regulations around hemp and cannabidiol (CBD). Those included scheduling the public hearing for May 31, where written and oral public comments were submitted by stakeholders, sharing “their experiences and challenges with these products [hemp and CBD products], including information and views related to product safety.”

That statement also announced the formation of an internal agency working group to “explore potential pathways for dietary supplements and/or conventional foods containing CBD to be lawfully marketed; including a consideration of what statutory or regulatory changes might be needed and what the impact of such marketing would be on the public health.”

Fast-forward to May 31, the day of the public hearing, and all eyes in the industry focused on what all these stakeholders had to say to the FDA about CBD. The day started off with about two hours of oral comments, each speaker had roughly two minutes to deliver their thoughts.

Karen Howard, CEO of the Organic and Natural Health Association, speaks about the quality of CBD products 

Oral Comments

Industry stakeholders representing cannabis businesses sang much of the same tune, clamoring for wise regulations on safety, testing, banking and interstate commerce, among other standards. NCIA Policy Director Andrew Kline’s comments included running through five major positions of the industry trade organization representing CBD companies. Those included recommending the FDA act quickly in setting up regulations, stressing the massive economic impact of the industry, saying that CBD products are generally safe, clamoring for voluntary, consensus-based standards and informing consumers of any potential risks. “The bottom line is this – an overwhelming preponderance of evidence indicates that cannabis and cannabis-derived compounds present minimal health and safety concerns,” Kline told the folks at the FDA. “Time is of the essence. Hemp-derived CBD products are in very high consumer demand and the industry is eagerly awaiting FDA’s regulatory framework for these products. We strongly recommend that FDA act quickly to clarify the regulatory environment because there is significant confusion in the market.”

Anna Williams, representing the American Association for Laboratory Accreditation (A2LA), stressed the importance of testing for contaminants and adulterants as well as advocating for national standards on lab testing, instead of the state-by-state network of different standards.

Patients & Public Safety

After industry stakeholders had their chance to speak, the FDA allowed a group of advocacy organizations representing patients time to speak. That included representatives for the Alzheimer’s Association and the American Epilepsy Society, both of which were hesitant to throw their full support behind CBD as medicine. Kevin Chapman with the American Epilepsy Society said he wants to see clear warning labels, testing standards, more clinical trials and more studies before the group is ready to form a position on using CBD as medicine. Keith Fargo with the Alzheimer’s Association supports clinical trials to study it more, but thinks CBD is risky for patients without serious evidence of efficacy. A representative from the Tuberous Sclerosis Alliance also echoed similar concerns. They want to see labeling of drug interactions on labels of CBD products.

One section of the oral comments included discussions about patients, public safety and retailers/distributors.

After those comments, some organizations had the chance to speak followed by comments from retailers and distributors. Patrick Bird, owner of PMB BioTek Consulting, spoke on behalf of AOAC International, where he primarily discussed public safety. He said they want cannabis products to be regulated with food safety in mind, asking for FSMA to apply to hemp products. They want to adequately ensure product safety with things like mandating HACCP plans, recall readiness, saying hemp products should be treated just like food products.

Retailers & Distributors

Peter Matz, representing the Food Marketing Institute, the trade association for the supermarket industry, said that regulatory ambiguity is a serious issue that needs addressing. “There is mass confusion in the marketplace for the public, suppliers, retailers and state regulators,” says Matz. “Demand for CBD products in human and animal use is growing rapidly. ¼ of American have already tried it. We are fielding questions from companies seeking clarity regarding the current federal regulatory framework.” He added, what many others also mentioned, that the FDA needs to move swiftly to provide a pathway to regulation.

State Regulators

Next on the docket came presentations from state government entities, including state departments of agriculture, followed by healthcare professionals. The state regulators that spoke mentioned a lot about food safety, standards, testing regulations, GMPs and things like that to protect consumer safety. “Currently states are struggling with the lack of sound scientific research available in CBD and long-term health impacts,” said Pam Miles, representing the Virginia Department of Agriculture.

The docket for state regulators delivering presentations

One interesting aspect on their talks however was telling the FDA just how large their markets have gotten already and how they need guidance on how to regulate markets in their own states. Joseph Reardon, with the North Carolina Department of Agriculture, said they already have about 600 farmers growing hemp and thousands of processors working with the product in their state. “We urge the FDA to resolve the statutory issues improperly establish a legal pathway for CBD products to enter the market place,” Reardon commented. He also asked that the FDA extend the written comment period from July to August. “We are simply looking for a regulatory framework on the extraction, production and reconstitution of CBD or cannabinoid related products.”

Healthcare & Research

Healthcare providers, and physician testimony also echoed a lot of the same concerns, including the lack of research done, concerns about effects on at-risk populations and concerns about use as ingredients in dietary supplements and food. Some of the presentations also highlighted the room for nefarious activity in an unregulated marketplace. Some went as far as to mention cases where they found CBD vape juices with DXM in it (the active ingredient in cough syrup), CBD products found to contain THC, as well as synthetic cannabinoids responsible for drug overdose deaths. Some advocates in the hemp and CBD community have equated these arguments similar to reefer madness.

The major takeaway from this hearing is that everyone wants to see more data. Researchers and healthcare providers want to study the efficacy of CBD used in medicine, regulators want public safety information, patient advocates want to see data about effects on at-risk populations, trade organizations want data to back up label claims and the FDA wants to see just how safe CBD really is.

Arizona To Implement Mandatory Lab Testing

By Aaron G. Biros
No Comments

Good news came to patients using medical cannabis in Arizona earlier this week: Lawmakers in Arizona unanimously passed SB1494 through the state’s House and Senate, the bill requiring mandatory lab testing for medical cannabis products. Arizona Governor Doug Ducey is expected to sign the bill and has ten days to do so.

Arizona Governor Doug Ducey

When Governor Ducey signs the bill into law it will mark the first time since the state legalized medical cannabis in 2011 that a measure to protect patient safety via lab testing will be implemented. According to the bill, beginning November 1, 2020, all cannabis products shall be tested prior to sales “to determine unsafe levels of microbial contamination, heavy metals, pesticides, herbicides, fungicides, growth regulators and residual solvents and confirm the potency of the marijuana to be dispensed,” (Page 6, Section 36-2803).

The bill requires dispensaries to provide test results to patients immediately upon request. Dispensaries need to display a sign notifying patients of their right to see “certified independent third-party laboratory test results for marijuana and marijuana products for medical use,” according to the text of the bill (Page 7, Section 36-2803.01).“There will have to be some serious planning, but other states have achieved this and we can too.”

Under the new bill, the Arizona Department of Health Services will adopt rules to certify and regulate labs, establishing requirements like health and safety protocols, mandatory quality assurance program and standards, chain of custody and sampling policies, adequate records, accreditation, proficiency testing, among other requirements (Page 6-7, Section 36-2803).

Ryan Treacy, co-founder of the Arizona Cannabis Laboratory Association (ACLA) and CEO/Founder of C4 Laboratories, says this is a major turning point for Arizona’s cannabis industry. “We have been devoid of regulations with regard to testing the entirety of the program since it was legalized; This will be a significant change,” says Treacy. “Now patients can make sure they are getting a safe and clean product and getting exactly what they paid for.”

For those in the know when it comes to cannabis testing in the United States, the new requirements will look very similar to other states with testing requirements. One particularly unique aspect of the new program, however, is the establishment of a “Medical Marijuana Testing Advisory Council,” made up of stakeholders representing different interests in Arizona’s cannabis industry. Members of the council will include representatives from dispensaries, labs, cultivators, concentrate producers, edibles producers, as well as registered patients, caregivers, a representative from the Arizona Department of Public Safety, a licensed health care provider and “any other members deemed necessary by the director,” reads the text of the bill (page 16, Section 36-2821).

Ryan Tracy, co-founder of the ACLA and founder/CEO at C4 Labs.

“Other states like California have complained about detection limits, while Arizona is taking a unique approach with an advisory council with stakeholders in the cannabis industry,” says Treacy. “So that when the Department of Health Services promulgates rules, they are taking into account the challenges in the cannabis industry specifically. We have a chance to do this right and avoid pitfalls we’ve seen in other states.”

One problem worth mentioning for Arizona’s cannabis industry: Dispensaries have not been required to test products for patients since medical cannabis was legalized back in 2011. That means many producers could be very used to operating procedures that don’t account for lab testing. With mandatory lab testing, some producers may be behind the curve when it comes to mitigating contamination.

According to Treacy, this could disrupt the supply chain a little bit. “When testing becomes mandatory in November 2020, dispensaries will need a full panel of tests performed on their samples,” says Treacy. “With the entire market now required to complete a full panel in depth analysis on each product, product testing will become a more time-consuming stop in the supply chain. So companies will need to work that into their plan to meet regulation requirements to prevent a bottleneck and maintain patients’ access to their cannabis medicine.”

Arizona has a chance to prevent that type of bottleneck seen in states that implemented testing requirements, like California for example. “When you have a habitual history of not testing products, it can be very hard to change, which adds to Arizona’s challenges,” says Treacy. “We need to make sure this does not affect access for patients and the ability of the industry to continue to flourish and grow.”

While Treacy thinks the transition will be difficult for some, it’s absolutely necessary for Arizona’s patients to access clean and safe medicine. “There will have to be some serious planning, but other states have achieved this and we can too.”

Clinical Trials Commence for CBD Pet Products

By Aaron G. Biros
2 Comments

Products using hemp-derived cannabidiol (CBD) designed for pets is not a new concept; Companies have been marketing CBD pet products for quite some time now, making their way into pet stores across the United States. Some pet owners have embraced the trend, using CBD oil to calm pets down, help alleviate joint pain as well as inflammation, while others are understandingly skeptical when it comes to using novel remedies for their furry friends.

Researchers at the University of Pennsylvania’s School of Veterinary Medicine hope to find some answers to those questions, particularly regarding the efficacy of using CBD remedies for dogs. According to a press release, a team of researchers at University of Pennsylvania’s Veterinary Clinical Investigations Center will perform the first major double-blind clinical trial to study the effectiveness of CBD in treating joint immobility in dogs. The trial will be led by principal investigator Dr. Kimberly Agnello.

According to the press release, this is the largest trial for cannabinoid therapy in pets so far. The trial will include use of the CBD-infused pet product, Therabis’ “Mobility.” Therabis is a subsidiary of Dixie Brands, Inc., a large cannabis infused products company in markets across the United States. Here are some of the details on the clinical trial, shared through the press release:

Dogs known to be suffering from inflammation secondary to osteoarthritis will be studied to determine whether those who receive the Therabis supplement achieve better outcomes than untreated dogs. One group of dogs will receive the formula for a proprietary veterinarian-specific formula Therabis product; a second group will receive Cannabidiol alone which previous studies have shown may have benefit in osteoarthritic dogs; a control group will receive a placebo. Study designers are targeting inclusion of up to 20 dogs in each group. The design of this study will provide valuable data defining the synergistic potential of the additional ingredients in the Therabis formula.

According to Dr. Stephen M. Katz, co-founder of Therabis, they think the data from the trials will show a positive outcome for dogs using their products. “We are honored to have a Therabis product selected by the world-renowned experts at Penn Vet for their first major study of the effects of natural hemp oil to reduce joint pain in dogs,” Says Katz. “Our experience in my clinic has shown that cannabidiol (CBD) is an effective treatment in reducing inflammatory response. We have a passion for improving dogs’ quality of life, and we look forward to learning all we can about therapeutic methods to achieve this.”

The results from this clinical trial, to be published in an academic journal upon conclusion of the study, should be of great interest to the hemp industry. Brightfield Group estimates that the CBD-infused pet products market is a $199 million industry, expected to grow up to $1.16 billion by 2020.

Arizona Still Doesn’t Require Lab Testing, But That Could Change Soon

By Aaron G. Biros
2 Comments

As of today, Arizona is the only state in the country that has legalized medical cannabis but does not require producers to test their medical cannabis. States throughout the country that legalize medical cannabis routinely implement regulations that require third-party, independent lab testing to protect patient and consumer safety. Arizona legalized medical cannabis for a number of qualifying conditions back in 2011, but still has no measure like other states to protect patient safety.

Lawmakers in Arizona now have the opportunity to change that with SB1494, which passed unanimously through the state’s Senate back in March of 2019. According to the Arizona Cannabis Laboratory Association (ACLA), the bill awaits action in the House of Representatives. The ACLA says in a press release that “supporters of the bill are calling on lawmakers to move on a bill that unanimously passed in the Senate earlier this year.” The bill would require producers to use independent, third-party labs to test cannabis for things like harmful toxins and molds.

Ryan Tracy, co-founder of the ACLA and founder/CEO at C4 Labs.

According to Ryan Treacy, co-founder of the ACLA and CEO/Founder of C4 Laboratories, the ACLA was formed for a few important reasons: “We feel it is very important that we encourage and cultivate a professional and collaborative rapport among the reputable Arizona cannabis labs,” says Treacy. “So that we can call upon the collective groups’ years of experience to help provide insight and suggestions on how we as a group can insure the most accurate and consistent results for our clients throughout the state and ultimately their patients.” Treacy went on to add that it is particularly important their collective voice be heard at the State Capitol as lawmakers work towards passing SB 1494.

“There isn’t any reason to wait for someone to get sick before the legislature passes this bipartisan bill. Let’s get it done!”George Griffeth, President of the ACLA, says there is a sense of urgency in passing this bill before the voters decide on legalizing recreational adult-use cannabis next year. “Everyone agrees that now is the time to be proactive to protect patients from unsafe contaminants,” says Griffeth. “Currently 61 tons of medical marijuana is consumed by patients and many believe that the number of people using the medicine will continue to grow. With a ballot initiative related to the recreational use of marijuana facing voters next year, Arizona must act now to make sure standards are in place.”

They say the bill has bipartisan support and many stakeholders in Arizona’s cannabis industry express support for it as well. For Ryan Treacy, he is worried about patients consuming harmful chemicals and toxins. “My colleagues and I are deeply concerned that more than two-hundred thousand people who use medical marijuana could be inadvertently exposing themselves to toxic chemicals, E. Coli, Salmonella or mold,” says Treacy. “There isn’t any reason to wait for someone to get sick before the legislature passes this bipartisan bill. Let’s get it done!”

Treacy says this bill is particularly difficult to pass because the original measure to legalize medical cannabis was a ballot initiative. That means the bill needs 75% support in both the House and the Senate in order to amend the original measure. “The passing of this bill would be a huge win for the patients and will help to ensure honesty and transparency for those that operate in the current medical cannabis program here in AZ,” says Treacy. “This testing bill is also written with legislative intent to cover any and all future adult use or recreational use legislative laws or ballot initiatives. We hope to have a final verdict on this bill by end of this week or early next.”

EU Regulations Address Heavy Metals In Consumer Products

By Christopher Dacus
No Comments

RoHS 3 (EU Directive 2015/863) adds a catch-all “Category 11” of regulated products that includes electronic nicotine delivery systems (ENDS), e-cigarettes, cannabis vaporizers and vape pens. This category becomes effective July 22, 2019. The most significant restricted substance applicable to this category is lead, and RoHS requires regulated products to contain less than 1000 parts per million (ppm). This follows on the heels of California’s new 2019 regulations requiring the testing of contents of cannabis vape cartridges using even stricter limits for lead (which makes sense because it applies to the product being consumed, not the separate electronic components). These regulations may seem unrelated, but anecdotally there have been widespread reports of higher than expected lead content in China-sourced electronic components, including both cartridges and related electronics. Whether metal used in e-cigarette type products is the source of any lead in the actual nicotine, cannabis or other concentrated product is an entirely different topic, but new laws, and in particular the new RoHS catch-all category, make 2019 an important year for any company responsible for certifying or testing lead levels in e-cigarette or vape products.

Background on EU RoHS

RoHS (Restriction of Hazardous Substances) originated in the EU in 2003 as a restriction on hazardous substances in specified categories of electronics and electronic products. Other countries have passed laws styled after RoHS, but only the EU RoHS is addressed here. Unlike some environmental laws, RoHS is not only focused on the safety of products during their life cycle of consumer use, but is designed to keep restricted substances out of landfills and recycling centers.

The original RoHS restricted the use of lead, cadmium, mercury, hexavalent chromium, PBB and PBDE. RoHS now restricts the use of a total of ten substances after the EU added four types of phthalates to its restricted substance list. Compliance with RoHS became a requirement for the use of the CE mark in 2011, and replaced a RoHS compliant mark on restricted products.

RoHS specified categories for regulation include large household appliances, small household appliances, computer equipment, lighting, power tools, toys, certain medical devices, control equipment (smoke alarms, thermostats and their industrial equivalents), and ATM machines. Newly added Category 11, the “catch all” category, includes all other electronic and electrical equipment not covered in the previous categories, including electronic nicotine delivery systems, cannabis vaporizers and vape pens.

RoHS Lead Exemptions Complicate Compliance

RoHS provides numerous exceptions to its strict 1000ppm lead standard that are slated to expire in phases from 2021 through 2024. Most Category 11 exceptions will not expire until 2024. For example, RoHS permits different levels of lead for lead in glass and ceramics, lead in high temperature solders, and lead in copper and aluminum alloys. So, an e-cigarette may contain some parts that are held to the highest level of lead restriction, it may but contain isolated components that (at least through 2024) are held to more permissive standards. While this leeway may reduce manufacturing costs for certain components, it creates greater complexity in testing. Anecdotal reports suggest that especially for products that compete heavily on price, sourcing from lesser-known Chinese foundries has resulted in unpredictable lead levels.

Take Away Points

As vape and e-cigarette companies compete with new features and design elements each year, and companies rely on new manufacturers, keeping up with regulations has proven to be difficult for both U.S. and for EU regulated products. For example, a company has to comply with numerous regulations regarding the oil or concentrate that will ultimately be inhaled by a consumer, and with regulations like RoHS that regulate parts a consumer may never touch or see. Each year, some company comes out with a new set of electronic features that may interact with newly formulated oils or concentrates, other companies compete for features or price points, making these products a moving target when it comes to testing.

Adding lead to many metals makes them easier to work with and therefore cheaper. Anecdotal reports suggest that especially for products that compete heavily on price, sourcing from lesser-known Chinese foundries has resulted in unpredictable lead levels. This can be the result of any number of causes: changes in sub-contractors, uses of industrial equipment for other products that permit higher lead content, or simply unscrupulous management that is willing to risk a contract to save money manufacturing a batch of components. There is speculation that some lead may leach into oil or concentrates in e-cigarette and vape products from the contact between the oil or concentrate and internal heating elements in certain type of products. RoHS compliance with regard to lead levels may reduce the chance of inadvertent lead contamination by such means, and compliance may therefore yield benefits on several regulatory fronts.

Compliance with RoHS for each part of an e-cigarette or vape therefore requires knowing your supplier for each component, but given increased regulation of these products (both the hardware and consumable elements) this can only help compliance with regulations in every relevant jurisdiction.

BioTrackTHC Selected For Maine’s Traceability Contract

By Aaron G. Biros
No Comments

On May 15, BioTrackTHC was announced the conditional winner for Maine’s seed-to-sale tracking system government contract. The award is still pending final approval from the State Procurement Review Committee and the successful negotiation of the contract.

BioTrackTHC, a Helix TCS subsidiary, announced in a press release their conditional award earlier this month. The contract means that BioTrackTHC would partner with the state to provide software for tracking both medical and recreational cannabis products from the immature plant to the point of retail sales.

The contract could go for as long as six years, through 2025. If this contract receives final approval from the state internally, then this will become the ninth government contract for BioTrackTHC. Patrick Vo, CEO of BioTrackTHC, expects a quick deployment of the software once the contract is finalized. “We are excited to be working with the State of Maine and are grateful for their vote of confidence in our team’s ability to execute upon state-level tracking contracts and rapidly deploy a sound and secure technology solution,” says Vo.

Zachary L. Venegas, Executive Chairman and CEO of Helix TCS, Inc, says BioTrackTHC’s technology is leading the industry in shaping regulatory oversight for legal cannabis. “As states and countries begin to rollout or expand legal cannabis programs, our technology continues to lead as demonstrated by this Intent to Award and our multiple recent contract extensions with our partners,” says Venegas. “We look forward to playing a vital role in shaping the global cannabis industry and ensuring that it is able to operate efficiently and transparently.”

Food processing and sanitation

Sanitation Starting Points: More Than Sweeping the Floors and Wiping Down the Table

By Ellice Ogle
No Comments
Food processing and sanitation

Sanitation is not just sweeping the floors and wiping down the table – sanitation has a wide-ranging function in a cannabis food manufacturing facility. For example, sanitation covers the employees (and unwanted pests), food-contact equipment (and non-food-contact equipment), trash disposal (including sewage), and more. Ultimately, sanitation systems maintain a clean environment to prevent foodborne illness from affecting human health. Fortunately, there are resources and tools to ease into establishing a robust sanitation program.

Overall, the main goal of sanitation is to produce safe food, to keep consumers healthy and safe from foodborne illness. With the cannabis industry growing and gaining legalization, cannabis reaches a larger, wider audience. This population includes consumers most vulnerable to foodborne illness such as people with immunocompromised systems, the elderly, the pregnant, or the young. These consumers, and all consumers, need and deserve safe cannabis products every experience.

FDAlogoTo produce safe food, food manufacturing facilities in the United States must at least follow the Food and Drug Administration (FDA)’s Code of Federal Regulations Title 21 Chapter I Subchapter B Part 117, current good manufacturing practice, hazard analysis, and risk-based preventive controls for human food. Although cannabis is currently not federally regulated, these regulations are still relevant for a cannabis food manufacturing facility since the same basic principles still apply. Also, these regulations are a good resource to simplify a comprehensive sanitation program into more manageable components, between sanitary operations and sanitary facilities. With more manageable components, the transition is smoother to then identify the appropriate tools that will achieve a thorough sanitation program.

Sanitary operations

1) General maintenance of the facilities: The buildings and fixtures of the food manufacturing facility cover a lot of ground – hiring a maintenance team will divide the responsibility, ensuring the entire facility can be maintained in a clean and sanitary condition. Furthermore, a team can build out a tool like a preventative maintenance program to restrict issues from ever becoming issues.

Figure 1: Dirty Cloth Towel in Dirty “Sanitizer” Solution
Dirty Cloth Towel in Dirty “Sanitizer” Solution (an example of what NOT to do)

2) Control of the chemicals used for cleaning and sanitizing: Not all chemicals are equal – select the appropriate cleaning and sanitizing chemicals from reputable suppliers. Obtain the right knowledge and training on proper use, storage, and proper protective equipment (PPE). This ensures the safe and effective application of the chemicals in minimizing the risk of foodborne illness.

3) Pest control: Understand the environment within the facility and outside the facility. This will aid in identifying the most common or likely pests, in order to focus the pest control efforts. Keep in mind that internal pest management programs can be just as successful as hiring external pest control services.

4) Procedures for sanitation of both food-contact and non-food-contact surfaces: Developing sanitation standard operating procedures (SSOPs) provides guidance to employees on appropriate cleaning and sanitizing practices, to balance effective and efficient operations. A master sanitation schedule can control the frequency of indicated sanitation procedures.

5) Storage and handling of cleaned portable equipment and utensils: Cross contamination in storage can be minimized with tools such as controlled traffic flow, signage, training, color coding, and more.

Sanitary facilities

6) Water supply, plumbing, and sewage disposal: Routine inspections of plumbing, floor drainage, and sewage systems prevent unintended water flow and damage.

7) Toilet facilities: Clearly defining standards for the toilet facilities and setting accountability to everyone who uses them will ensure that the toilet facilities are not a source of contamination for the food products.

Food processing and sanitation
PPE for all employees at every stage of processing is essential

8) Hand-washing facilities: Good manufacturing practices (GMPs) include proper hand washing and proper hand washing starts with suitable hand-washing facilities. For example, frequent checks on running water, hand soap, and single use towels ensure that all hands are clean and ready to produce safe food.

9) Trash disposal: While trash can be a source of cross contamination, trash can also attract and harbor pests. Scheduling regular trash disposal and controlling traffic flow of waste are two ways to minimize the risk of cross contamination from trash.

Bonus

Even after meeting these requirements, sanitation programs can be more sophisticated. An example is to institute an environmental monitoring program to verify and validate that the sanitation program is effective. Another example is in identifying and measuring key performance indicators (KPIs) within the sanitation program that can improve not just the sanitation processes, but the operations as a whole. Principally, sanitation is cleanliness on the most basic level, but waste management can encompass sanitation and grow into a larger discussion on sustainability. All in all, sanitation programs must reshape and evolve alongside the company growth.

Sanitation is interwoven throughout the food manufacturing process; sanitation is not a single task to be carried out by a sole individual. As such, it is beneficial to incorporate sanitation practices into cannabis food manufacturing processes from the beginning. Protect your brand from product rework or recalls and, most importantly, protect your consumers from foodborne illness, by practicing proper sanitation.

The Need for Standardization in Medical Cannabis Testing

By Andrew James
2 Comments

There has been a move towards the legalization of cannabis for medical and/or recreational use across many countries and US states in recent years, leading to greater demand for accurate potency and safety testing. Despite this, there are currently no standardized regulations between states or countries for quality control including content, composition, adulterants, potency or levels of toxic residues. As such, in many cases where regulations are in place, testing is generally carried out at a small number of approved independent testing laboratories.

The need for self-regulation has led to the growth of portable gas chromatography (GC) being used in the field of cannabis testing.This lack of clarity makes it difficult for consumers to make informed decisions about what they are purchasing, an issue which could be damaging to the industry’s changing reputation. As it stands, producers of cannabis and cannabis-derived products can supply goods with potentially harmful contaminants such as fungi or pesticide residues, which are potentially threatening to human health. Most cannabis products sold legally in the US are required to be tested and labelled for THC, the chemical responsible for most of cannabis’s psychoactive effects. A US study found that as few as 20% of recreational cannabis products are accurately labelled with only 17% of products reviewed accurately labelled for THC content (i.e. within 10% of the labeled value). It also found 23% were under labelled, and 60% were over labelled.

If cannabis were to be categorized as a regulated pharmaceutical drug, it would be rigorously tested to comply with stringent rules and regulations regarding quality and safety of the product, as are all other drugs. However, as there is currently no centralized regulatory body that oversees this, the responsibility of quality assurance falls to the grower, manufacturer and sometimes the consumer.

The Need for Cannabis Analysis

The most common requirement when testing cannabis is positive identification and quantification of the total THC:CBD ratio. In a highly competitive marketplace, this information is important, as cannabis consumers tend to equate THC levels with price. In many instances, lower THC products are cheaper and higher THC concentrations make products more expensive. Without robust systems in place for sufficient testing, this information cannot be accurately determined, meaning the customer often cannot make an informed decision.

Pesticide use is surprisingly common in the cannabis cultivation industry

In addition to potency testing, one of the core issues facing the industry and by extension, the end consumer, is the prevalence of pesticides in cannabis products. In the Netherlands, the Ministry of Environment and Health reported that over 90% of cannabis plants tested had pesticides on them. While steps have been taken to tackle this, the lack of cohesion in testing standards combined with the onus on individual labs to carry out testing, has led to some issues within the industry.

Many individual retailers in the U.S. and internationally are self-testing for impurities such as pesticides, heavy metals and microbials. While there is a clear need for standard testing across all locations, the need for self-regulation at present has led to the growth of portable gas chromatography (GC) being used in the field of cannabis testing.

Using GC as an analytical tool 

With the increased need for quality control and quality assurance in the largely unregulated cannabis industry, technology is now more accessible to smaller companies and to people with minimal laboratory experience. There are a range of cannabis testing packages available for smaller individual labs which offer more mobile testing with affordable packages. The lower entry price makes GC analysis affordable for more laboratories while still delivering reliable, high quality results.

Portable GC instruments can offer high quality potency testing, pesticide screening, terpene and flavor profiling, and residual solvents analysis. These instruments can give growers and processors an accurate result of cannabinoid percentages, a fundamental piece of information for growers and dispensaries. Systems can be configured for manual injection or a range of autosampler options can be added.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

GC enables the rapid and accurate identification and quantification of the THC:CBD ratio. This is important for companies which are carrying out self-testing as it allows their customers to have assurances in the short term over the quality of their product, as well as reducing any potential risks to public health.

An example of this in practice is the use of GC by Dutch company Shamanics which carries out testing service for coffee shops in the Netherlands. The company conducts terpene analysis and potency testing to assure the quality of the products it supplies, with a portable GC, which offers the flexibility required without any established guidelines on testing in place.

When testing for potency using the GC, they look for total THC and CBD by converting the acidified versions of the cannabinoids into neutral forms within the heat of the GC injector. The process has flexibility which means that if they need to see both the acidified and neutral versions, they can do this by derivatizing the sample. The accuracy of this process is crucial to Shamanics and similar companies within the industry so that they can accurately judge the quality of a product, and relay this information to retailers and consumers.

The future of GC in standardized testing

While the growing availability of portable GC instruments and the increasing sophistication of individual labs means more companies are able to self-test products, there is still a significant hurdle to overcome in terms of standardising and regulating both the medical and recreational cannabis markets. Where regulation is brought in it should be consistent across states and countries and most importantly, it should be monitored and enforced. In the meantime, responsible producers are using the technology available to them to provide consumers with guarantees that their cannabis products are safe and of a high quality.