Tag Archives: FDA

HACCP

Hazard Analysis and Critical Control Points (HACCP) for the Cannabis Industry: Part 4

By Kathy Knutson, Ph.D.
No Comments
HACCP

In Part 3 of this series on HACCP, Critical Control Points (CCPs), validation of CCPs and monitoring of CCPs were defined. When a HACCP plan identifies the correct CCP, validates the CCP as controlling the hazard and monitors the CCP, a potential hazard is controlled in the manufacturing and packaging of cannabis-infused edibles. The food industry is big on documentation. If it’s not documented, it did not happen. The written hazard analysis, validation study and monitoring of CCPs create necessary records. It is these records that will prove to a customer, auditor or inspector that the edible is safe. Here in Part 4, more recordkeeping is added on for deviation from a CCP, verification and a recall plan. 

Take Corrective Action When There Is a Deviation from a Critical Control Point

Your food safety team conducts a hazard analysis, identifies CCPs and decides on monitoring devices, frequency and who is responsible for monitoring. You create an electronic or paper record of the monitoring for every batch of edible to document critical limits were met. Despite all your good efforts, something goes wrong. Maybe you lose power. Maybe the equipment jams. Nothing is perfect when dealing with ingredients, equipment and personnel. Poop happens. Because you are prepared before the deviation, your employees know what to do. With proper training, the line worker knows what to do with the equipment, the in-process product and who to inform. In most cases the product is put on hold for evaluation, and the equipment is fixed to keep running. The choices for the product include release, rework or destroy. Every action taken needs to be recorded on a corrective action form and documents attached to demonstrate the fate of the product on hold. All the product from the batch must be accounted for through documentation. If the batch size is 100 lb, then the fate of 100 lb must be documented.

Verify Critical Control Points Are Monitored and Effective

First, verification and validation are frequently confused by the best of food safety managers. Validation was discussed as part of determining CCPs in Part 3. Validation proves that following a CCP is the right method for safety. I call validation, “one and done.” Validation is done once for a CCP; while verification is ongoing at a CCP. For example, the time and temperature for effective milk pasteurization is very well known and dairies refer to the FDA Pasteurized Milk Ordinance. Dairies do not have to prove over and over that a combination of time and temperature is effective (validation), because that has been proven.

I encourage you to do as much as you can to prepare for a recall.A CCP is monitored to prove the safety parameters are met. Pasteurization is an example of the most commonly monitored parameters of time and temperature. At a kill step like pasteurization, the employee at that station is responsible for accurate monitoring of time and temperature. The company managers and owners should feel confident that CCPs have been identified and data are being recorded to prove safety. Verification is not done by the employee at the station but by a supervisor or manager. The employee at the station is probably not a member of the food safety team that wrote the HACCP plan, but the supervisor or manager that performs verification may be. Verification is proving that what was decided by the food safety team is actually implemented and consistently done.

Verification is abundant and can be very simple. First, every record associated with a CCP is reviewed by a supervisor or manager, i.e. someone who did not create the record. This can be a simple initial and date at the bottom of the record. Every corrective action form with its associated evaluation is verified in the same way. When HACCP plans are reviewed, that is verification. Verification activities include 1) testing the concentration of a sanitizer, 2) reviewing Certificates of Analysis from suppliers, 3) a review of the packaging label and 4) all chemical and microbiological testing of ingredients and product. The HACCP plan identifies CCPs. Verification confirms that implementation is running according to the plan.

Verification is like a parent who tells their child to clean their room. The child walks to their room and later emerges to state that the room is clean. The parent can believe the word of the child, if the child has been properly trained and has a history of successfully cleaning their room. At some frequency determined by the parent, the room will get a parental visual check. This is verification. In the food industry, CCP monitoring records and corrective action must be reviewed within seven days after the record is created and preferably before the food leaves the facility. Other verification activities are done in a timely manner as determined by the company.

Food processing and sanitation
Product recalls due to manufacturing errors in sanitation cause mistrust among consumers.

Write a Recall Plan

In the food industry, auditors and FDA inspectors require a written recall plan. Mock recalls are recommended and always provide learning and improvement to systems. Imagine your edible product contains sugar, and your sugar supplier notifies you that the sugar is recalled due to glass pieces. Since you are starting with the supplier, that is one step back. Your documentation of ingredients includes lot numbers, dates and quantity of sugar.You keep good records and they show you exactly how much of the recalled lot was received. Next you gather your batch records. Batches with the recalled sugar are identified, and the total amount of recalled sugar is reconciled. You label every batch of your edible with a lot code, and you identify the amount of each affected lot and the customer. You have a press release template in which you add the specific information about the recall and affected lots. You notify every customer where the affected edible was shipped with a plan to return or destroy the edible. When you notify your customers, you go one step forward.

How would your company do in this situation? I have witnessed the difficulties a company faces in a recall when I was brought in to investigate the source of a pathogen. Food safety people in my workshops who have worked through a recall tell me that it was the worst time of their life. I encourage you to do as much as you can to prepare for a recall. Here are two good resources:

Please comment on this blog post below. I love feedback!

Epidiolex-GW

Epidiolex Gives GW Pharmaceuticals Boost In Global Markets

By Marguerite Arnold
1 Comment
Epidiolex-GW

GW Pharmaceuticals scored a significant victory in the United States with its cannabis-based epilepsy drug Epidiolex in mid-April. The company received approval from a U.S. Food and Drug Administration (FDA) panel for its use in treating two forms of drug-resistant epilepsy.

The drug was granted “orphan drug” status in the EU a year ago.Will this be enough to move the conversation forward about cannabis as medicine in the United States? 

So what does the future hold for this drug and a company, which has visited this space before? Remember Sativex?. The Company now faces real competition from a raft of companies moving into this space from just about everywhere – both from Canada and of course Europe itself.

The FDA Might be on the Verge of Approving its First Cannabis-Based Drug

It is not like this is either the FDA’s or GW Pharma’s first discussion about the medical efficacy of cannabinoids. Sativex, a mouth spray containing THC, was never granted approval in the United States for the treatment of MS – although it received such approvals in Europe.

Epidiolex-GWIf the FDA approves Epidiolex (made from CBD), it will be the first cannabinoid-based drug approved in the United States by the federal agency.

Will this be enough to move the conversation forward about cannabis as medicine in the United States? What will happen in the EU?

A Divergent and Highly Different Drug Market

Will the FDA finally approve at least one form of a CBD-based drug? The chances are that Epidiolex might finally move the agency to approve. However,this is not, despite the hype that the company has made in the press about this, the first cannabinoid-based drug to be approved in the United States. It might be, however, the first drug based on actual natural cannabinoids rather than synthetic ones that it approves for some purpose. Both Cesamet and Dronabinol (or Marinol) are synthetic cannabinoid drugs approved for several conditions from chronic pain caused by chemo to Parkinson’s.

GW logo-2But those who are hoping that this drug approval might open the floodgates at the FDA for startersshould take a pew. While Sativex was not approved in the United States, it was made available after 2011 for MS patients, particularly in Germany, which has the highest rate of MS of any European country. The problem? It was just too expensive for most people to afford – since their insurance would not cover it. And doctors were even more resistant to prescribing than they are now. So even getting a prescription was almost impossible.

That conversation was different in Europe post-2013, and there were people who managed to get a doctor to write a prescription not to mention afford the eye-watering prices sans insurance coverage.

That said, given the choice between whole plant meds, most people still prefer bud cannabis to the spray variety. And in Europe right now, that is what is on the table.

What Will This Mean in the US vs Europe?

In the US, the first thing that FDA approval will mean is drug sales for only one branded drug. That is the cynicism at play here. Furthermore, it also neatly dodges the THC issue.

In Europe? Particularly Germany? This development is not likely to make much of a dent. GW is competing with every single Canadian producer with flower-based oil – and on both the medical and non-medical CBD front. That also now includes local producers. Further, this is a market which prizes genericized drugs over name brands. In France, the distribution of Sativex was held up, primarily because of the row over cost. And who would pay.

It is also unlikely that the FDA approval in the United States will change the discussion either in the US on a federal level – or in Europe.

The most important place this news already made a dent? GW Pharma’s stock price – at least temporarily. It is also a spot of good news the company really needs. In February, the company’s GWP42006 drug designed for focal seizures (drug resistant epilepsy) failed to outperform placebo results and wiped 5% off the company’s stock.

Cannabis Track Added to 2018 Food Safety Consortium

By Cannabis Industry Journal Staff
No Comments

The 6thAnnual Food Safety Consortium Conference & Expo has announced a series of talks focused on cannabis. In addition to the categories such as Operations, Detection, Compliance and Supply Chain, the Call for Abstracts now includes a fifth category in this year’s program: Cannabis Quality.

The Cannabis Quality series will feature presentations by subject matter experts in the areas of regulations, edibles manufacturing, cannabis safety & quality as well as laboratory testing. The Food Safety Consortium itself is hosted by our sister publication, Food Safety Tech, but the Cannabis Quality series will be co-hosted by Cannabis Industry Journal as well.

Rick Biros, President/Publisher, Innovative Publishing Co. LLC
Rick Biros, conference director of the Food Safety Consortium

Citing the need to address safety in a burgeoning market, Rick Biros, conference director, believes education is key to helping the cannabis industry mature. “As the cannabis industry evolves, so does the need to protect the consumer,” says Biros. “Just as we protect the safety of our food supply chain, it is important to educate the cannabis industry about protecting their supply chain from seed to sale. Through these educational talks, we want to help bridge that gap, hosting a forum for those in the cannabis industry to interact with food safety professionals.”

The 2018 Food Safety Consortium Conference & Expo will be held November 14–16 in Schaumburg, Illinois. The event is a top food safety conference that features Food Safety and Quality Assurance (FSQA) industry experts and government officials.

The conference focuses on food safety education and networking, providing attendees information on best practices and new technology solutions to today’s food safety challenges. Previous keynote speakers have included food safety leaders such as Stephen Ostroff, M.D., deputy commissioner for Foods and Veterinary Medicine, U.S. Food and Drug Administration and Frank Yiannis, vice president of Food Safety at Walmart and author of Food Safety Culture: Creating a Behavior-Based Food Safety Management System.

Before submitting an abstract, following are a few points to keep in mind:

  • The abstract should be about 300 words
  • Presentations will be judged on educational value
  • Don’t submit a sales pitch!
  • Presentation time is about 45 minutes—this includes a 10-15 Q&A session

To see the Call for Abstracts and submit a presentation for consideration, click here. The deadline for submissions is May 31, 2018. The conference will notify everyone who submits an abstract on the status of acceptance by June 15.

Epidiolex-GW

GW Pharma’s Epidiolex Gets Encouraging FDA Assessment

By Aaron G. Biros
No Comments
Epidiolex-GW

According to a press release, last week GW Pharmaceuticals’ drug Epidiolex received a positive FDA panel review, which is an encouraging and important step towards getting the drug approved by the U.S. Food and Drug Administration and on the market in the United States. Epidiolex is an anti-epilepsy drug, taken in a syrup form, with the main active ingredient being cannabidiol (CBD), and less than 0.1 % THC.

GW logo-2The drug is targeted to treat Dravet syndrome (DS) and Lennox-Gastaut syndrome (LGS) a rare early-onset type of epilepsy found in children, according to Reuters. FDA staff said the drug “reduces seizure frequency in patients with drug-resistant LGS or DS while maintaining a predictable and manageable safety profile.”

GW Pharmaceuticals, founded in 1998 and based in London, is a biopharmaceutical company that has made headlines previously for developing cannabis-derived drugs. Sativex, one of the first drugs they developed, is derived from cannabis, but was not approved by the FDA. It is however available in other parts of the world, such as the EU, Israel and Canada.

Epidiolex-GWIf Epidiolex actually gets approval by the FDA, it will be the first-ever cannabis-derived drug available via prescription in all of the United States. According to Justin Gover, chief executive officer of GW Pharmaceuticals, this is a momentous breakthrough for the company. “We are pleased by the Advisory Committee’s unanimous recommendation to approve Epidiolex, which would provide an important treatment option for patients with LGS and Dravet syndrome, two of the most severe and treatment-resistant forms of epilepsy,” says Gover “This favorable outcome marks an important milestone in our company’s unwavering commitment to address the significant unmet need for patients with LGS and Dravet syndrome and our resolve to study Epidiolex under the highest research and manufacturing standards. We look forward to our ongoing discussions with the FDA as it continues to review the Epidiolex NDA.”

According to the GW press release, the Peripheral and Central Nervous System Drugs Advisory Committee of the FDA unanimously recommended supporting the approval of the New Drug Application (NDA) for the drug. That advisory committee is sort of like an independent panel; their unanimous vote doesn’t necessarily mean the drug will get approved, but the FDA takes their decision into consideration when approving new drugs. So this panel recommendation is certainly a good sign and shows this drug could potentially be on the path to FDA approval.

HACCP

Hazard Analysis and Critical Control Points (HACCP) for the Cannabis Industry: Part 2

By Kathy Knutson, Ph.D.
2 Comments
HACCP

HACCP is a food safety program developed in the 1960s for the food manufacturing industry, mandated for meat, seafood and juice and adopted by foodservice for the safe serving of meals at restaurants. With state requirements for the safe production of cannabis-infused products, namely edibles, facilities may be inspected against HACCP principles. The cannabis industry and state inspectors recognize the need for safe edible manufacture. Lessons can be learned from the food industry, which has advanced beyond HACCP plans to food safety plans, starting with procurement and including the shipment of finished product to customers.

In my work with the food industry, I write HACCP and food safety plans and deliver training on food safety. In Part 1 of this series, I wrote about the identification of hazards, which is the first step in HACCP plan development. Before we continue with the next HACCP step, I will discuss Good Manufacturing Practices (GMPs). GMPs are the foundation on which HACCP is built. In other words, without GMPs in place, the facility will not have a successful HACCP program. GMPs are required in the food, dietary supplement and pharmaceutical industries, all under the enforcement of the federal Food and Drug Administration (FDA). Without federal regulation for cannabis edible manufacture, there may not be state-mandated requirements for GMPs. Let me warn you that any food safety program will not succeed without proper control of GMPs.HACCP

GMPs cover all of your programs and procedures to support food safety without having a direct, instant control. For example, when brownies are baked as edibles, food safety is controlled by the time and temperature of baking. A written recipe and baking procedure are followed for the edible. The time and temperature can be recorded to provide documentation of proper baking. In the food industry, this is called a process preventative control, which is critical to food safety and is part of a HACCP plan. Failure of proper time and temperature of baking not only leads to an unacceptable product in terms of quality, but results in an unsafe product that should not be sold.

Back to GMPs. Now think of everything that was done up to the steps of mixing and baking. Let’s start with personnel. Facilities for edibles have hiring practices. Once an employee is hired, the employee is trained, and training will include food safety procedures. When working at the job after training, the employee measuring ingredients will demonstrate proper grooming and hand washing. Clean aprons, hairnets, beard nets and gloves will be provided by the facility and worn by the employee. The same goes for the employee that bakes and the employee that packages the edible. One category of GMPs is Personnel.

Edibles facilities are not foodservice; they are manufacturing. A second GMP category is cleaning and sanitizing. Food safety is controlled through proper cleaning and sanitizing of food contact surfaces (FCS). The edible facility will have in place the frequency and methods for cleaning all parts of the facility- outside, offices, restrooms, break room and others. GMPs cover the general cleaning procedures and procedures for cleaning receiving, storage; what we would consider processing to include weighing, process steps and packaging; finished product storage and shipping. Management of the facility decides the methods and frequency of cleaning and sanitizing with greater care given to processing. Without proper cleaning and sanitizing, a facility cannot achieve food safety.

I could go on and on about GMPs. Other GMPs include water safety, integrity of the buildings, pest control program, procurement, sewage disposal and waste disposal. Let’s transition back to HACCP. In Part 1 of this series, I explained identification of hazards. Hazards are one of three types: biological, chemical and physical.

At this point, I am not surprised if you are overwhelmed. After reading Part 1 of this series, did you form a food safety team? At each edibles facility, there should be at least one employee who is trained externally in food safety to the standard that foodservice meets. Classes are offered locally and frequently. When the facility is ready, the next step of training is a HACCP workshop for the food industry, not foodservice. Edibles facilities are not foodservice; they are manufacturing. Many colleges and associations provide HACCP training. Finally, at the least, one employee should attend a workshop for Preventive Controls Qualified Individual.

To institute proper GMPs, go to ConnectFood.com for a GMP checklist. Did you draw up a flow diagram after reading Part 1? With a flow diagram that starts at Receiving and ends at Shipping, the software at ConnectFood.com takes you through the writing steps of a HACCP or food safety plan. There are many resources out there for GMPs, so it can get overwhelming. ConnectFood.com is my favorite resource.

The next step in HACCP development after identification of hazards is to identify the exact step where the hazard will be controlled. Strictly speaking, HACCP only covers process preventive controls, which typically start with a weigh step and end with a packaging step. A facility may also have a step where temperature must be controlled for food safety, e.g. cooling. In HACCP, there are commonly two process preventive controls:

  • Biological hazard of Salmonella and Escherichia coli: the heat step
  • Physical hazard of metal: metal detector

Strictly speaking, HACCP does not include cleaning, sanitizing and supplier approval for procurement of ingredients and packaging. I hope you see that HACCP is not enough. There have been hundreds of recalls and outbreaks due to problems in non-processing steps. The FDA requires food manufactures to go beyond HACCP and follow a written food safety plan, which includes hazards controlled at these steps:

  • Biological hazard of Listeria monocytogenes: cleaning and sanitizing of the processing environment and equipment
  • Physical hazards coming in with ingredients: supplier approval
  • Physical hazard of glass and hard plastic: Here I am thinking of glass breaking or plastic pieces flying off buckets. This is an internal hazard and is controlled by following written procedures. The written document is a Standard Operating Procedure (SOP).
  • Chemical hazard of pesticides: supplier approval
  • Chemical hazard of mycotoxins: supplier approval
  • Chemical hazard of allergens: supplier approval, label check at Receiving and product labeling step

Does a cannabis edible facility honestly not care or not control for pesticides in ingredients because this is not part of HACCP? No. There are two ways for procurement of ingredients in which pesticides are controlled. Either the cannabis cultivation is controlled as part of the samebusiness or the facility works with a supplier to confirm the ingredient meets pesticide tolerances. Strictly speaking, this control is not part of HACCP. For this and many other reasons, HACCP is a good place to start the control of food safety when built on a solid foundation of GMPs. In the same way the food industry is required to go beyond HACCP with a food safety plan, the cannabis industry must go beyond HACCP.

My thoughts will be shared in a webinar on May 2nd hosted by CIJ and NEHA. I encourage you to listen in to continue this discussion.Please comment on this blog post below. I love feedback!

Steven Burton

Top 4 Food Safety Hazards for the Cannabis Industry

By Steven Burton
18 Comments
Steven Burton

As many US States and Canadian provinces approach legalization of cannabis, the question of regulatory oversight has become a pressing issue. While public awareness is mainly focused on issues like age restrictions and impaired driving, there is another practical question to consider: should cannabis be treated as a drug or a food product when it comes to safety? In the US, FDA governs both food and drugs, but in Canada, drugs are regulated by Health Canada while food products are regulated under the CFIA.There are many food safety hazards associated with cannabis production and distribution that could put the public at risk, but are not yet adequately controlled

Of course, there are common issues like dosage and potency that pharmaceutical companies typically worry about as the industry is moving to classifying its products in terms of percentage of chemical composition (THC, CBD, etc. in a strain), much as we categorize alcohol products by the percentage of alcohol. However, with the exception of topical creams and ointments, many cannabis products are actually food products. Even the herb itself can be brewed into teas, added to baked goods or made into cannabis-infused butters, oils, capsules and tinctures.

FDAlogoAs more people gain access to and ingest cannabis products, it’s only a matter of time before food safety becomes a primary concern for producers and regulators. So when it comes to food safety, what do growers, manufacturers and distributors need to consider? The fact is, it’s not that different from other food products. There are many food safety hazards associated with cannabis production and distribution that could put the public at risk, but are not yet adequately controlled. Continue reading below for the top four safety hazards for the cannabis industry and learn how to receive free HACCP plans to help control these hazards.

Aflatoxins on Cannabis Bud

Just like any other agricultural product, improper growing conditions, handling and storage can result in mold growth, which produce aflatoxins that can cause liver cancer and other serious health problems. During storage, the danger is humidity; humidity must be monitored in storage rooms twice a day and the meter must be calibrated every month. During transportation, it is important to monitor and record temperatures in trucks. Trucks should also be cleaned weekly or as required. Products received at a cannabis facilities should be tested upon receiving and contaminated products must always be rejected, segregated and disposed of safely.

Petri dish containing the fungus Aspergillus flavus. It produces carcinogenic aflatoxins, which can contaminate certain foods and cause aspergillosis, an invasive fungal disease.
Photo courtesy of USDA ARS & Peggy Greb.

Chemical Residues on Cannabis Plants

Chemical residues can be introduced at several points during the production and storage process. During growing, every facility should follow instructions for applying fertilizers and pesticides to crops. This includes waiting for a sufficient amount of time before harvesting. When fertilizer is being applied, signs must be posted. After cannabis products have been harvested, chemical controls must be in place. All chemicals should be labelled and kept in contained chemical storage when not in use to prevent contamination. Only food-grade chemicals (e.g. cleaners, sanitizers) should be used during curing, drying, trimming and storage.

Without a comprehensive food safety program, problems will inevitably arise.There is also a risk of excessive concentration of chemicals in the washing tank. As such, chemical concentrations must be monitored for. In general, water (obviously essential for the growing process) also carries risks of pathogenic bacteria like staphylococcus aureus or salmonella. For this reason, city water (which is closely controlled in most municipalities) should be used with an annual report and review. Facilities that use well water must test frequently and water samples must be tested every three months regardless.

Pathogenic Contamination from Pest Infestations

Insects, rodents and other pests spread disease. In order to prevent infestations, a pest control program must be implemented, with traps checked monthly by a qualified contractor and verified by a designated employee. It is also necessary to have a building procedure (particularly during drying), which includes a monthly inspection, with no holes or gaps allowed. No product should leave the facility uncovered to prevent fecal matter and other hazards from coming into contact with the product. Contamination can also occur during storage on pallets, so pallets must be inspected for punctures in packaging material.

Furthermore, even the best controlled facility can fall victim to the shortcomings of their suppliers. Procedures must be in place to ensure that suppliers are complying with pest and building control procedures, among others. Certifications should be acquired and tracked upon renewal.

Pathogenic Contamination Due to Improper Employee Handling

Employee training is key for any food facility. When employees are handling products, the risk of cross-contamination is highest. Facilities must have GMP and personnel hygiene policies in place, with training conducted upon hiring and refreshed monthly. Employees must be encouraged to stay home when sick and instructed to wear proper attire (gloves, hair nets, etc.), while glass, jewelry and outside food must not be allowed inside the facility. Tools used during harvesting and other stages may also carry microorganisms if standard cleaning procedures are not in place and implemented correctly by employees.

As the cannabis industry grows, and regulatory bodies like the FDA and CFIA look to protect public safety, we expect that more attention will be paid to other food safety issues like packaging safety (of inks and labels), allergen control and others. In the production of extracts, for example, non-food safe solvents could be used or extracts can be mixed with ingredients that have expiration dates, like coconut oil. There is one area in which the cannabis industry may lead the way, however. More and more often, risks of food terrorism, fraud and intentional adulteration are gripping the food industry as the global food chain becomes increasingly complex. It’s safe to say that security at cannabis facilities is probably unparalleled.

All of this shows that cannabis products, especially edibles (and that includes capsules and tinctures), should be treated the same as other food products simply because they have the same kinds of hazards. Without a comprehensive food safety program (that includes a plan, procedures, training, monitoring and verification), problems will inevitably arise.

FDAlogo

FDA Issues Warning To CBD Companies

By Aaron G. Biros
No Comments
FDAlogo

On November 1st, the U.S. Food and Drug Administration (FDA) published a press release addressing warning letters issued to four companies. The warning letters, sent to companies marketing cannabidiol (CBD) products with therapeutic claims, cites unsubstantiated claims about their products’ ability to treat or cure cancer and other diseases.

A snippet of the warning letter issued to Greenroads

According to the press release, the four companies that received warning letters are Greenroads Health, Natural Alchemist, That’s Natural! Marketing and Consulting, and Stanley Brothers Social Enterprises LLC. The press release called their marketing campaigns “deceptive” for “unproven treatments.” Here is the letter they sent to Greenroads Health.

“As part of the U.S. Food and Drug Administration’s ongoing efforts to protect consumers from health fraud, the agency today issued warning letters to four companies illegally selling products online that claim to prevent, diagnose, treat, or cure cancer without evidence to support these outcomes,” reads the FDA statement. “Selling these unapproved products with unsubstantiated therapeutic claims is not only a violation of the Federal Food, Drug and Cosmetic Act, but also can put patients at risk as these products have not been proven to be safe or effective.”

According to the press release, the FDA has issued ninety warning letters in the past ten years, with around twelve this year, to companies making fraudulent claims about cancer therapies. Here are some examples of claims made by companies that the FDA took issue with:

  • “Combats tumor and cancer cells;”
  • “CBD makes cancer cells commit ‘suicide’ without killing other cells;”
  • “CBD … [has] anti-proliferative properties that inhibit cell division and growth in certain types of cancer, not allowing the tumor to grow;” and
  • “Non-psychoactive cannabinoids like CBD (cannabidiol) may be effective in treating tumors from cancer – including breast cancer.”

“Substances that contain components of marijuana will be treated like any other products that make unproven claims to shrink cancer tumors,” says FDA Commissioner Scott Gottlieb, M.D. “We don’t let companies market products that deliberately prey on sick people with baseless claims that their substance can shrink or cure cancer and we’re not going to look the other way on enforcing these principles when it comes to marijuana-containing products. There are a growing number of effective therapies for many cancers. When people are allowed to illegally market agents that deliver no established benefit they may steer patients away from products that have proven, anti-tumor effects that could extend lives.”

 

Shimadzu, Cure And CK Sciences Partner On R&D of Pharmaceutical Cannabis Products

By Aaron G. Biros
1 Comment

Yesterday, Shimadzu announced the formation of a partnership with Cure Pharmaceutical Group and CK Sciences to research and develop pharmaceutical cannabis-based products, according to a press release. The three organizations entered a collaborative agreement with the goal of researching and developing products, then moving them through clinical trials using FDA guidelines.

According to the press release, the partnership’s primary goal will be researching and profiling the synergistic effects of the cannabinoids and terpenes, called the “Entourage Effect.”

Shimadzu, a well-know analytical instrument manufacturer, has been making a name for itself in the scientific cannabis space with a number of exciting new ventures. They have worked extensively with cannabis laboratories throughout the country in refining methods and improving analytical chemistry in the space. For example, Shimadzu powers EVIO Labs Florida with over $1.2 million in the latest testing instrumentation.

The Cannabis Analyzer For Potency

Tracy Ryan, chief executive officer and founder of CK Sciences, says outfitting their lab for pharmaceutical research was a big priority for starting their venture. “When we met with Shimadzu, and we saw their passion for our mission, we knew we were in incredible hands! When analyzing cannabis everything has to be so precise,” says Ryan. “With Shimadzu’s platforms and team of brilliant scientists supporting our efforts, we have already set ourselves up for success.”

Back in March, Shimadzu launched their Cannabis Analyzer for Potency, a high-performance liquid chromatograph (HPLC) designed specifically for quantitative determination of cannabinoid content. The organizations in the partnership will be using that instrument, in addition to a headspace Gas Chromatograph Mass Spectrometer (GCMS) for terpene profiling. Both Cure and CK will use the instruments to generate data, with the goal to validate cannabis as a viable pharmaceutical treatment, according to the press release.

Bob Clifford, Ph.D., general manager of marketing for Shimadzu, says they are excited to work with the organizations. “The emerging pharmaceutical cannabis market requires dedicated, thoughtful leaders eager to showcase the pharmaceutical benefits of cannabis on a scientific level,” says Clifford. “The Cure/CK Sciences group has continuously demonstrated such a leadership commitment, and we’re excited about the opportunities this agreement provides.”

EVIO Logo

EVIO Labs Expands To Florida

By Aaron G. Biros
1 Comment
EVIO Logo

Currently, there are no lab testing regulations for Florida’s medical cannabis market. Chris Martinez, co-founder and chief operating officer of EVIO Labs Florida, a veteran-owned business, is looking to change that.

Chris Martinez, co-founder and president of EVIO Labs Florida

When Martinez co-founded EVIO Labs Florida, he saw the need for a dedicated cannabis lab to ensure safety and quality of medicine for patients in the state. Partnering with EVIO Labs to accomplish this goal, Martinez secured a 5,500 sq. ft. facility in Broward County to test for potency, pesticides, microbial contaminants, terpenes, residual solvents and heavy metals. Their lab, a first of its kind in the industry, qualifies as a true pharmaceutical-grade clean room. This week, Martinez also secured their 2nd laboratory location in the City of Gainsville, where they will test for potency, microbials, terpenes and residual solvents. And he isn’t doing it on the cheap. “Our Broward lab is powered by Shimadzu with over $1.2M in the latest testing equipment utilizing LCMS technology with the world’s fastest polarity switching time of 5 m/sec and scan speeds of 30,000 u/sec with UF Qarray sensitivity 90 times that of previously available technologies,” says Martinez.

Martinez, an entrepreneur at heart, started the lab with a team of experts to become the first completely cannabis-focused laboratory in Florida. Jorge Segredo, their head chemist and quality assurance director, has over 18 years of experience in the development of nutraceutical and pharmaceutical products under ISO and FDA accreditation. Segredo has helped launch three independent FDA-accredited laboratories and has extensive knowledge of HPLC, GCMS, LCMS, ICPMS technologies and development/validation of testing methods and procedures. Cynthia Brewer, their director of operations, was an active participant in the 2017 state legislative session and has been an advocate for medical cannabis, working with legislators on a suitable framework to increase patient access to cannabis.

The EVIO team is using instruments from Shimadzu

EVIO is one of the nation’s leaders in cannabis testing, research science and advisory services. It is an evolving network of laboratories with nine EVIO cannabis laboratories operating in five different states: Oregon, Colorado, Massachusetts, Florida and California. “After speaking with industry chemists around the country for months, the EVIO name was constantly brought up in conversation,” says Martinez. “When we spoke with the EVIO Team it was an easy decision for us to partner.” He says Lori Glauser, chief operating officer of EVIO, and William Waldrop, chief executive officer of EVIO, are truly visionaries in the cannabis industry.

According to Martinez, their licensing agreement with EVIO Labs (OTC:SGBYD) marked a first for the publicly traded company with exclusivity in the Florida market. The agreement includes proprietary testing methodologies, operating procedures, training and support.

In addition to testing cannabis for safety and quality, they are launching a technology platform called MJ Buddy, essentially a software tool that takes efficacy feedback from patients and uses testing and genetic data they gather from EVIO Labs across the country. “This will provide real data to the cannabis industry as to the medical benefits for thousands of patients in relation to the genotype and cannabinoid profiles of their medicine,” says Martinez.

Of the states that have legalized some form of cannabis, a large number of them have some lab testing regulations on the book, with some more comprehensive than others. Martinez says he hopes the Florida Department of Health, Office of Medical Marijuana Use follows some of the more thorough state programs, such as Oregon. His team has compiled a set of documents for regulators with recommendations for regulating the lab testing industry.

Without any regulations on paper, it is up to businesses to produce safe and quality medicine, without any oversight. EVIO Labs Florida follows FDA Good Laboratory Practices, has an ISO 17025:2005 accreditation pending, and is working on TNI 2016 accreditation.

When discussing what he wants to see happen with Florida’s regulatory framework, Martinez says the rules need to be specific to Florida. For example, due to the climate being so humid, microbial contaminant testing for things like yeast and mold will be particularly imperative. Because processing methods like butane and alcohol extraction are legal, he emphasizes the need for comprehensive residual solvents testing. “The most important regulation would be to have the laboratories select the samples at the MMTC facility and have the state randomly verify laboratory results to ensure accurate unbiased testing,” says Martinez.

In addition to that, he hopes their pesticide thresholds will be realistic and based on actual science. “We believe the public should receive carcinogenic data for products that are inhaled,” says Martinez. “Chemicals may be introduced into the processing of cannabis to vape liquid that may cause harm. This is important information for public health and communication of the risk related to exposure to such materials.” Martinez says EVIO Labs Florida was founded on the belief that through technology and science we can increase safety and patient outcomes.

What’s Happening on Capitol Hill? Part 3: The Medical Bills

By Brian Blumenfeld, J.D., M.A.
No Comments

This article continues the bill-by-bill review begun in the August 1st article on cannabis reform legislation proposed in the 115th Congress. In the next article and final piece in this series, we will examine the banking and tax reform bills related to cannabis.

Medical Cannabis Reform Bills 

S. 1008 – Therapeutic Hemp Medical Act of 2017

HR. 2273 – Charlotte’s Web Medical Access Act of 2017

Policy: These bills would amend the CSA to end federal prohibition over all CBD products and all hemp plants with THC content levels of below 0.3%. In other words, people and businesses would be free to grow hemp and/or manufacture CBD products without any fear of federal prosecution. These products would most likely then fall under the regulation of other federal and/or state agencies, but the bills do not specify what agencies they might be or what controls might be put in place.

Impact: The impacts from these bills nationwide have the potential to be massive. Hemp is a plant that can be put to highly effective use in many different industries, from textiles and construction to foodstuffs and seafaring. The efficiency of its growth and the breadth of its utility will make it a highly valuable commodity and a competitor with many other raw materials. For state-legal cannabis businesses, the legalization of CBD and hemp at the federal level could fundamentally change the market for those products. States that legalized cannabis already have provisions in place dealing with hemp and CBD—sometimes alongside their cannabis laws, sometimes handled by a separate state agency—and they could either leave those as they are or open up those markets to interstate activity. In states that have not legalized, CBD and hemp are typically included in the state’s definition of cannabis, and therefore they will remain illegal under state law unless further action is taken. Most likely, if federal prohibition ends on hemp and CBD, state prohibition will follow suit. Because legalization at the federal level will allow for interstate commerce in hemp and CBD, expect the emergence of a nationwide market, driven by online sales and interstate marketing, and developing independently from a cannabis industry still constrained to in-state activities.

Procedural Status:

Senator Cory Gardner (R-CO) Photo: Gage Skidmore, Flickr

S. 1008

  • Introduced: May 2, 2017 by Senator Cory Gardner (R-CO)
  • Cosponsors: 7 Republican, 4 Democrat
  • Referred to Senate Committee on:
    • Judiciary

 HR. 2273

  • Introduced: May 1, 2017 by Representative Scott Perry (R-PA)
  • Cosponsors: 10 Republicans, 10 Democrats
  • Referred to House Committee on:
    • Judiciary
      • Subcommittee on Crime, Terrorism, Homeland Security, and Investigations
    • Energy and Commerce
      • Subcommittee on Health
    • Financial Services

S. 1276 – Cannabidiol Research Expansion Act

Policy: This bill would accomplish two objectives: First, it would open channels for researchers to access and experiment with cannabis and cannabis extracts. Second, it would initiate the process at the end of which the Attorney General must make a determination as to which Schedule of the CSA is most appropriate for cannabidiol (CBD).

Impact: The impact on this legislation to state-legal cannabis businesses is rather remote—in both time and practice. The research access provisions will certainly create an uptick in medical and psychological research activity, the outcomes of which will add to our knowledge of how consuming cannabis in different forms and amounts effects the brain and body. This type of government-regulated research takes many years to process and complete, as both bureaucratic and scientific standards must be met. As for initiating the re/de-scheduling review process for CBD, this is a direct response to the 2016 denial by the DEA to re/de-schedule cannabis. That determination, published in the Federal Registrar on August 12, 2016, was made following a comprehensive study of the medical benefits and harms of cannabis conducted by the Department of Health and Human Services (HHS) and the Food and Drug Administration (FDA). Although such an in-depth study and its resulting negative determination pronounced so recently would normally rule out the chances of success for another re/de-scheduling attempt so soon after, the DEA did leave the door open with its statement that it “did not focus its evaluation on particular strains of marijuana or components or derivatives of marijuana.” It is just this door that S. 1276 seeks to exploit. By focusing the re/de-scheduling process on CBD specifically, the presumption is that the outcome of the scientific CBD studies would have a far better chance at satisfying the re/de-scheduling criteria set forth in the CSA. If such a determination was made, then the impact would come in two potential varieties. One, CBD would be rescheduled and become available for medical use according to FDA rules applicable to other prescription drugs. Two, CBD would be descheduled and would fall under the prerogative of the states, in which case the above analysis for S. 1008 and HR. 2273 would pertain.

Senator Dianne Feinstein (D-CA)
Photo: Daniel Torok

Procedural Status:

S. 1276

  • Introduced: May 25, 2017 by Senator Dianne Feinstein (D-CA)
  • Cosponsors: 3 Republican, 2 Democrat
  • Referred to Senate Committee on:
    • Judiciary

S. 1374 – Compassionate Access, Research Expansion, and Respect States (CARERS) Act of 2017

HR. 2920 – Compassionate Access, Research Expansion, and Respect States (CARERS) Act of 2017

HR. 715 – Compassionate Access Act of 2017

HR. 714 – Legitimate Use of Medical Marijuana Act (LUMMA) of 2017

Policy: All four of these bills would make an exception to the CSA for state medical cannabis laws. Federal prohibition, in other words, would end for medical cannabis in those states that have legalized, and it would be left to those states to devise how it would be regulated. In states that have not legalized, both state and federal prohibition would remain. The companion CARERS Acts in the House and Senate, along with HR. 714, would also amend FDA rules to widen access to cannabis for research purposes.

Impact: The impact of these bills on the rules for state-legal medical cannabis businesses would be relatively minor in terms of functionality. This is so because they leave not only the determination to legalize up to the states, but they leave the design of the regulatory system up to the states as well. In other areas, however, big changes will be seen that benefit the industry: banking will open up for state medical businesses, and so will the opportunity to write-off ordinary business expenses. Investment risks over legality will end, making for easier access to capital. Questions about contract enforcement and risks of federal prosecution will become moot, and when state regulatory bodies make decisions on how to govern the industry, they will no longer have to concern themselves with U.S. DOJ enforcement and/or prosecutorial policies. Enactment of any of these bills would be a big win for medical cannabis.

Senator Cory Booker (D-NJ) Photo: David Shinbone, Flickr

Procedural Status:

S. 1374

  • Introduced: June 15, 2017 by Senator Cory Booker (D-NJ)
  • Cosponsors: None
  • Referred to Senate Committee on:
    • Judiciary

HR. 2920

  • Introduced: June 15, 2017 by Representative Steve Cohen (D-TN)
  • Cosponsors: 1 Republicans
  • Referred to House Committee on:
    • Judiciary
      • Subcommittee on Crime, Terrorism, Homeland Security, and Investigations
    • Energy and Commerce
      • Subcommittee on Health
    • Veterans’ Affairs
      • Subcommittee on Health

HR. 715

  • Introduced: January 27, 2017 by Representative Morgan H. Griffith (R-VA)
  • Cosponsors: 2 Republicans, 1 Democrat
  • Referred to House Committee on:
    • Energy and Commerce
      • Subcommittee on Health
    • Judiciary
      • Subcommittee on Crime, Terrorism, Homeland Security, and Investigations

HR. 714

  • Introduced: January 27, 2017 by Representative Morgan H. Griffith
  • Cosponsors: 1 Democrat
  • Referred to House Committee on:
    • Energy and Commerce
      • Subcommittee on Health

HR. 2020 – To Provide for the Rescheduling of Marijuana into Schedule III of the CSA

Policy: As its wordy title indicates, this bill would bypass the schedule review process and by legislative fiat move cannabis from Schedule I to Schedule III of the CSA.

Representative Matt Gaetz (R-FL)

Impact: Businesses handling drugs in Schedule III must register with the DEA and comply with DEA record keeping and security requirements. Doctors would be permitted to prescribe cannabis products. Importing/exporting will become available by permit, which would bring state businesses into competition with foreign cannabis firms. The biggest impact will be that cannabis sold pursuant to federal law will have to undergo the FDA’s New Drug Application process conducted by the Center for Drug Evaluation and Research, the largest of the FDA’s five centers. This includes clinical testing and a comprehensive chemical/pharmacological review. The drug would then be subject to FDA regulation for marketing and labelling. For states that wanted to maintain their legal medical cannabis systems, a conflict would remain because cannabis cultivators and dispensaries could operate in compliance with state law while simultaneously failing to meet new FDA and DEA requirements. States will then have a choice: bring state laws into line with federal laws, creating all of the advantages of federal legality discussed above, yet causing major disruptions to the industry; or retain the status quo, allowing the industry to grow as is with all of the in-state advantages but without the advantages of federal legalization. This all would of course leave behind recreational cannabis which would remain in the legal gray zone.

  • Introduced: April 4, 2017 by Representative Matt Gaetz (R-FL)
  • Cosponsors:
  • Referred to House Committee on:
    • Energy and Commerce
      • Subcommittee on Health
    • Judiciary

HR. 331 – States’ Medical Marijuana Property Right Protection Act

Policy: Section 881(a)(7) of the CSA subjects to federal forfeiture all property involved with cannabis activities. This bill would make an exception to that provision for all property in compliance with state medical cannabis laws.

Impact: Although not legalizing medical cannabis, this bill would be a strong step in the direction of legitimizing state-legal medical cannabis businesses. As a result of the property forfeiture clause of the CSA, two impediments faced by the medical cannabis industry is that investors are hesitant to invest and land lords are hesitant to lease or otherwise engage the medical cannabis market. By eliminating the risk of such property loss due to the federal-state conflict, this bill would have the very welcomed impact of easing access to capital and expanding opportunities for land use.

  • Introduced: January31, 2017 by Representative Barbara Lee (D-CA)
  • Cosponsors:
  • Referred to the House Committee on:
    • Judiciary
      • Subcommittee on Crime, Terrorism, Homeland Security, and Investigations
    • Energy and Commerce
      • Subcommittee on Health