Tag Archives: fertigation

Thinking of Hiring a Cultivation Consultant? Here’s What You Can Expect

By David Perkins
No Comments

Hiring an experienced cultivation consultant is yet another cost, amongst the laundry list of never-ending expenses in the setup of a regulated, recreational grow. However, in the big picture it can actually save you a significant amount of time and money by providing you with the information you need to formulate a realistic budget, profitable cultivation site and a well-trained workforce. This article will explore just some of the many benefits a cultivation consultant can provide to your company.

An experienced consultant will have a vast array of knowledge to ensure the success of your company. One important area they can advise you on is budgeting. With years of experience cultivating, in both medical and recreational markets, an experienced consultant will have knowledge of not only start-up costs, but also hidden costs you must prepare for in advance. They will also be able to advise you on strategies to avoid future costs and problems. There may also be expenses in the build-out of your cultivation site you have not considered. For example, you may need a waste water treatment plan if you have any fertilizer run off that will flow to a sewage drain. It is important to know all possible costs when securing your investment or planning out your budget for the year.

Setting up a large-scale cultivation site in a regulated market can be extremely costly. Gone are the days of putting up a few lights in a closet; growing in a regulated market requires a larger scale, and therefore, larger costs and more complications. A consultant experienced in design and implementation of such large-scale, intricate cultivation plans will provide you with the knowledge you need to properly set-up and maintain your facility in order to ensure your company’s success. They will also know the tips and tricks to save you money along the way.

Something as simple as a centralized irrigation distribution zone can save you a lot of time and money.

A good consultant will be able to advise you on the design of your facility to ensure that the layout supports productivity, and that there is a proper workflow. It is important to hire a consultant before you get started with the build out of your facility, as it will be much more costly to have to correct mistakes in your design later on down the road. An experienced consultant will implement superior facilities layout and design to avoid future problems at the outset. Something as simple as a centralized irrigation distribution zone can save you a lot of time and money.

Once you have created the proper space, cultivation planning is important to avoid unnecessary problems from arising, which will ultimately delay profit. A well thought out cultivation plan will help you plan for success. A consultant will know what does and doesn’t work. For example, some equipment will run off an app on your phone; while convenient, there are some that don’t perform well which could end up costing the entire crop. These are things you want to know and work around, before you spend money unnecessarily.

An experienced consultant will have previously worked in various types and scales of cultivation sites, and from that experience will be able to teach you which processes and techniques work, and which ones don’t. Someone with less experience may believe that watering plants by hand would be an easy method to keep your garden irrigated, but it is actually the most time-consuming labor task (and therefore extremely costly), while an automated watering system can be very simple and cost-effective to install.

Some equipment will run off an app on your phone; while convenient, there are some that don’t perform well which could end up costing the entire crop

A skilled consultant can provide necessary training for your employees. Let’s face it, this is an entirely new industry, and therefore, most people applying for entry-level jobs at a cultivation site are unskilled. However, the best path to success when dealing with large-scale cannabis cultivation is to have skilled, happy employees. Educating and properly training your employees is essential. It helps to teach employees not only how to complete a task, but to help them understand why they are doing a given task. This will give your staff the skills and confidence they need to complete the task properly. Unskilled hands in your garden can jeopardize the success of your cultivation.

Don’t make the same mistakes others have made. Hiring a cultivation consultant can help you to avoiding problems before they occur. A professional consultant has the knowledge required to predict issues and problems before they occur, or implement a solution when corrective measures are necessary. Oftentimes issues can be avoided just by knowing the cause and effect of decisions and the potential outcomes they will have.

A cultivation consultant should also have a wide network of professional contacts to help you address any issues or problems that arise. Having a network of professionals to employ when necessary is critical for ensuring the success of every project. For example, wholesale contacts for cultivation equipment can help you not only to get the best price, but also ensure you are using the best equipment possible for your situation.

If you are still unsure about whether or not you need a cultivation consultant to help plan out your grow, or fix your grow if you’ve encountered problems, feel free to contact me to discuss your needs. I assure you there are ways I can save you money, improve your yields, and help your company be more successful in this ever-changing market.

Soleil control panel

IoT & Environmental Controls: urban-gro Launches Soleil Technologies Portfolio

By Aaron G. Biros
No Comments
Soleil control panel

Back in November of 2017, urban-gro announced the development of their Soleil Technologies platform, the first technology line for cannabis growers utilizing Internet-of-Things (IoT). Today, urban-gro is announcing that line is now officially available.

Soleil control panel
Screenshot of the data you’d see on the Soleil control panel

The technology portfolio, aimed at larger, commercial-scale growers, is essentially a network of monitors, sensors and controls that give cultivators real-time data on things like temperature, humidity, light, barometric pressure and other key factors. The idea of using IoT and hypersensitive monitoring is not new to horticulture, food or agriculture, but this is certainly a very new development for the cannabis growing space.

sensor
Substrate sensors, used for monitoring Ph, soil moisture & electrical conductivity.

According to Brad Nattrass, chief executive officer and co-founder of urban-gro, it’s technology like this that’ll help growers control microclimates, helping them make the minor adjustments needed to ultimately improve yield and quality. “As ROI and optimized yields become increasingly important for commercial cultivators, the need for technologies that deliver rich granular data and real-time insights becomes critical,” says Nattrass. “With the ability to comprehensively sense, monitor, and control the microclimates throughout your facility in real-time, cultivators will be able to make proactive decisions to maximize yields.”

heat map
The heat map allows you to find problem microclimates throughout the grow space.

One of the more exciting aspects of this platform is the integration of sensors, and controls with automation. With the system monitoring and controlling fertigation, lighting and climate, it can detect when conditions are not ideal, which gives a cultivator valuable insights for directing pest management or HVAC decisions, according to Dan Droller, vice president of corporate development with urban-gro. “As we add more data, for example, adding alerts for when temperatures falls or humidity spikes can tell a grower to be on the lookout for powdery mildew,” says Droller. “We saw a corner of a bench get hot in the system’s monitoring, based on predefined alerts, which told us a bench fan was broken.” Hooking up a lot of these nodes and sensors with IoT and their platform allows the grower to get real-time monitoring on the entire operation, from anywhere with an Internet connection.

soleil visuals
Figures in the system, showing temperature/time, humidity/time and light voltage

Droller says using more and more sensors creates super high-density data, which translates to being able to see a problem quickly and regroup on the fly. “Cannabis growers need to maintain ideal conditions, usually they do that with a handful of sensors right now,” says Droller. “They get peace of mind based on two or three sensors sending data points back. Our technology scales to the plant and bench level, connecting all of the aggregate data in one automated system.”

In the future, urban-gro is anticipating this will lay the groundwork for using artificial intelligence to learn when controls need to be adjusted based on the monitoring. Droller hopes to see the data from environmental conditions mapped with yield and by strain type, which could allow for ultra-precise breeding based on environmental conditions. “As we add more and more data and develop the platform further, we can deliver some elements of AI in the future, with increased controls and more scientific data,” says Droller.

urban-gro Launches Cannabis Industry’s First Line Of IoT Solutions

By Aaron G. Biros
No Comments

Last week at the MJBizCon, a major cannabis industry event held annually in Las Vegas, urban-gro launched the first technology line for cannabis growers utilizing Internet-of-Things (IoT). urban-gro, a cultivation technology company for commercial-scale growers, announced the launch of announced Soleil® Technologies, an integrated portfolio of hardware, software, and services that uses IoT.

“The solution suite includes per-plant sensing, environmental monitoring, machine diagnostics, fertigation management, lighting controls, inventory management, and seed-to-sale tracking,” reads the press release. IoT is essentially a network of devices embedded with sensors and software that allow the devices to connect and exchange data. IoT devices are used extensively in the food industry, including for integrated pest management, restaurant food safety and management and tracking product conditions such as temperature and humidity throughout the supply chain, among other uses.

Soleil consists of three primary lines:

  • Soleil 360 is the cloud-based software-as-a-service (SASS) platform that integrates all Soleil solutions.
  • Soleil Sense is the brand for all of urban-gro’s low-power wireless sensors that deliver data with the scale, precision and resolution needed for analytics and machine learning.
  • Soleil Controls is urban-gro’s product set for climate and irrigation controls, lighting systems, and other focused controls.

The core, low-power sensor that makes this unique was licensed from Edyza, a wireless innovator that specializes in low-power wireless grids that scale. urban-gro then developed on top of that sensor, including its cloud-based management, analytics, what the sensors detect and cover, etc., to make it ideal for cannabis growers.

According to Brad Nattrass, urban-gro’s chief executive officer, finding an IoT solution that can easily scale was a key goal for their business. “When evaluating the most advanced market-ready sensor technology available, it was crucial that we deliver a solution that can easily scale to thousands of sensors in order to satisfy the needs of large-scale commercial cultivators,” says Nattrass. “The introduction of Soleil demonstrates urban-gro’s commitment to going beyond simply supplying equipment, to truly serving our clients as an ongoing technological innovator and advisor, enabling cultivators to leverage today’s more advanced technologies to rise above the competition.”

“Cultivators will be able to monitor substrate moisture and EC (electrical conductivity) levels on a per plant basis, as well as track key environmental metrics like temperature, humidity, air movement, and probability of infestation,” reads the press release. “With multiple device options, cultivators can choose between several deployment options.” With the data hosted on the cloud, users can access it through web browsers, Android and iOS devices.

According to Jay Nichols, a representative of urban-gro, they have hired (and is hiring) code developers, product developers, etc. in order to expand this unit. Plant sensors are just one piece of the system, with the goal to automate the entire cultivation process, including controlling lights, pest management, irrigation and fertigation. They say it will be available in late Q1/early Q2.