Tag Archives: government

german flag

German Authorities Will Issue New Cannabis Cultivation Bid

By Marguerite Arnold
No Comments
german flag

According to Kermit the Frog, it’s never easy being green. It is also tough to be “first” in the cannabis biz. Anywhere.

One of the most remarkable features of the first years of state-level legalization in the U.S. was the sheer number of mistakes by the authorities in issuing licenses and bids for state-sanctioned cultivation and dispensation once the voters had forced legalization. There were several state-level “redos” and lots of legal mumbo jumbo thrown around as the green-rush kicked off at the state level.The real news? There is going to be a completely new one.

Fast-forward a couple of years and it is clear this is not just an issue of the confused state of legalization in the U.S.

Canada too, on a federal recreational level, has moved forward in fits and starts. And even though a fall start date to the market has now been enshrined into law, the continued moving target of the same has been a topic of fraught conversations and bargaining ever since the country decided to move ahead with full Monty recreational.

Across the pond, things are not going smoothly on the cannabis front. In the first week of July, the much stalled medical cultivation bid in Germany finally came to a limpid end. It remains to see if there will be any legal “bangs” as it whimpers away.

The real news? There is going to be a completely new one.

A Do-Over

According to documents obtained by Cannabis Industry Journal, the Bundesinstitut für Arzneimittel und Medizinprodukte (or BfArM) issued letters to original bid respondents in the first week of July. The letters appear to have been sent to all parties who originally applied to the first bid – far from the final top runners.

The translation, from German reads:

“We hereby inform you that we have withdrawn the above-mentioned award procedure…and intend to initiate a new award in a timely manner.”

The letter cited the legal decision of March 28 this year by the Düsseldorf Higher Regional Court as the reason the agency cannot award the contract. Specifically, because of “necessary changes to the tender documents…inparticular with regard to time, we have decided to cancel the procedure altogether and initiate a new award procedure.”

Per the letter, the new procedure will be published in the Official Journal of the EU. No date was mentioned.

An Expensive Surprise and a Global Response

Conventional wisdom in the industry about the fate of the first bid has been mixed since last September when the first hint of lawsuits against the procedure began to circulate. Highly placed sources within the industry have long had their doubts about the bid’s survivability, although nobody will talk on the record. The bid process is supposed to be secret.However, it is clear that another bid will be issued

Furthermore, for the last 9 months, BfArM has maintained that the agency would go full-steam ahead with the original tender. None of the major firms contacted by CIJ about this notification would confirm that they had received a similar letter, nor would they comment.

However, it is clear that another bid will be issued. Further, this time, it is also obvious to the extent that it was not before, the applicants will indeed hail from all points of the globe. On top of that, those who are qualified to respond and who missed it last time are unlikely to sit the bid out this time around.

German Parliament Building

It remains unclear of course, what the response of the finalists to the first bid will be. Including, theoretically,legal action forpotential damages. BfArM was, technically, held at fault by the court. This means that all the companies who made it to the previous “final round” have now suffered at a minimum, an expensive time delay where other outlays of cash were also required. That includes the leasing and retrofitting of high security real estate, but of course,is not limited to the same. If any of these firms do not obtain the bid in the second go around, will they sue?

At press time, there were no cannabis industry companies willing to comment on the matter as this is still a “secret” process – even if it now apparently has come to an end for this round.

Who Is Likely To Be a Major Contender This Time?

German firms who were sleeping the last time this opportunity arose (or brushed it off as a “stigmatized” opportunity) are not likely to sit the second tender offer out. Especially given advancements in legalization if not the industry both in Europe and globally in the period of time the bid has stalled.

Add to that Canadians, Dutch, Israeli and Uruguayan firms, and the mix of applicants this time is likely to be the who’s who of the global cannabis industry. Americans are still not qualified to participate (with experience at least). Why? No federal reform.Domestic cannabis will not be harvested in Germany until at least 2020. 

It is also likely to be even more expensive. Not to mention require easy and quick access to European-based or at least easily confirmable pools of cash. It is conceivable that successful applications this time around will not only have to prove that they have a track record in a federally legal jurisdiction but will also have to be able to quickly access as much as 100 million euros. And there are not many cannabis companies, yet, who can do that, outside of the presumed top 10 finalists to the bid.

Will Bid Respondents Be Limited To “Just” the Cannabis Industry?

It is, however, absolutely possible that this time around the bid could include a more established pharmaceutical player or two who realizes that the medical market here has absolutely proved itself. Within the space of a year, according to the most recent “market report” on the industry (from the perspective of one of the country’s largest statutory insurance companies – Techniker Krankenkasse), there are now just over 15,000 patients.

Cannabis, in other words, is no longer an “orphan drug.” It is also still, however, considered a narcotic. For that reason, seasoned European and German players may upset the market even more with an entry via this tender bid.

Here is what is certain for now. Domestic cannabis will not be harvested in Germany until at least 2020. And until that time, it will be a growing, but import-based market.

Steven Burton
Soapbox

Which Safety Standards Work Best for the Cannabis Industry?

By Steven Burton
No Comments
Steven Burton

Now that governments are legalizing cannabis around the world, the question looms for cannabis businesses seeking legitimacy in the new industry: what safety standards should apply? This question is more difficult as different jurisdictions grapple with defining and implementing legal requirements and struggle to keep up with the pace of growth.

For visionary cannabis business, it makes sense to anticipate requirements – not only from governments, but also from consumers and partners. Most regulations currently focus on security and basic health issues but, in the long-term, the industry that may offer the best model for cannabis businesses isn’t pharmaceuticals, but food. Cannabis (especially edibles) share similar hazards and traceability challenges with food products, so taking the lead from the food industry will be much more applicable and could offer greater benefits.

marijuana buds drying in racks biotrackthc
Dried cannabis curing with RFID tags as part of a traceability system.

Companies that achieve the highest and most flexible certification will enjoy a crucial competitive advantage when it comes to winning market share, popularity and consumer trust. Let’s take a quick look at the different options of food safety (and quality) certifications that cannabis businesses may consider. But first, let’s clarify two important definitions that are necessary to understand the food industry.

Basic Concepts from the Food Industry

The first acronym you should be aware of is GFSI, the Global Food Safety Initiative. GFSI is a food industry-driven global collaboration body created to advance food safety. When it comes to understanding GFSI, the important part to note is that certifications recognized by GFSI (like SQF, FSSC 22000, and BRC) are universally accepted. Companies operating under GFSI-recognized certifications open the most doors to the most markets, providing the highest potential for growth. For this reason, cannabis companies should be aware of and seriously consider seeking GFSI certifications

HACCPSecondly, many food safety programs are built around Hazard Analysis Critical Control Points, or HACCP. While many people may talk about HACCP like it’s a certification in and of itself, it is not actually a certification like the others on this list, but rather a methodology that helps companies systematically identify and control biological, chemical, and physical hazards that may arise during food production, handling, and distribution. Companies that adopt this methodology end up with a HACCP plan, which must then be followed at all times to avoid and address health and safety issues. It’s often required for food businesses and is generally required in most of the world, except where ISO 22000 is more common, primarily in Europe and countries whose primary export market is European. Since HACCP plans are also incorporated into most of the other achievable certifications, developing a HACCP program early will build a strong foundation for higher levels of certification.

Certifications for the Cannabis Industry

Now that we understand the basics of GFSI and HACCP, we can see how the certifications that have been developed by and for the food industry may apply to cannabis companies – and which you should consider necessary for your business.

GMP: Good Manufacturing Practice Certification

GMP (or sometimes cGMP) certification requires that companies abide by a set of good manufacturing processes for food and beverage products, pharmaceuticals, cosmetics, dietary supplements and medical devices. Since it really only covers basic sanitation and employee hygiene, it is considered the lowest level of certification in the industry. It is not recognized by GFSI, but GFSI does require all the standard benchmarks of a GMP be met before granting GFSI certification.

While GMP certification is often required, it is far below the standard that should be upheld by any serious businesses. It doesn’t cover many of the different types of hazards associated with food production – that I have argued will become increasingly relevant to cannabis producers – and doesn’t provide a systematic approach to identifying and controlling hazards like a HACCP program would. It’s really just about providing the basic procedures and checks to ensure that the facility is clean and that employees aren’t contaminating the products.GMP

Final Verdict: Recommended, but as the bare minimum. GMP is not sufficient on its own to adequately control the risk of recalls and foodborne illness outbreaks, and it limits a company’s market potential because it lacks the GFSI worldwide stamp of approval.

Some companies consider GMP certification a good place to start if you’re on a tight deadline for distribution in markets where only GMP is required by regulators. I would argue that striving for the minimum standards will be costly in the long run. Health, safety and quality standards are the foundations upon which winning companies are built. It’s critical to develop a corporate culture that will lead to GFSI-recognized programs without major organizational overhaul. Start on the right foot and set your sights higher – obtain a certification that will stand the test of time and avoid the pain and risks of trying to change entrenched behaviors.

SQF: Safe Quality Food Program Certification

SQF is my number one recommendation as the best certification for the cannabis industry. One of the most common certifications in North America, SQF is a food safety management system recognized by retailers and consumers alike. It is administered by the Food Marketing Institute (FMI) and, importantly, recognized by GFSI, which gives companies a huge competitive edge. SQF focuses on the whole supply chain.

SQF was also the first to develop a cannabis program and is currently the leader in this market segment. It is also the scheme that best integrates food safety with quality. Since it is recognized worldwide, SQF provides the greatest leverage to accelerate a company’s growth. Once obtained, products with SQF certification can often jump the queue to enter different regulatory markets.

Final verdict: Highly recommended. A cannabis company with an SQF certification has the greatest advantage because it offers the broadest worldwide reach and keeps companies a step ahead of competitors. It’s also achievable – just this past April, Curaleaf Florida ostensibly became the first cannabis company to achieve SQF certification. It is tough, but fair and practical.

Other Certification Standards

SQF is the top certification that should be considered by cannabis companies, especially outside of Europe. However, the food industry has several other major types of standards that, at this time, have limited relevance to the cannabis industry today. Let’s take a quick look.

When considering GFSI-recognized programs, the main choice for food companies is between SQF, which we’ve covered, and BRC (the British Retail Consortium Certification). BRC has the most in common with SQF but, while SQF was originally developed for processed foods, BRC was developed in the UK for meat products. Today, they are quite similar, but BRC doesn’t focus quite as much on the quality component as SQF does. While BRC could be a good option, they don’t have a program for cannabis and, thus far, do not appear to be as friendly toward the cannabis industry.The food industry has a lot to offer cannabis companies that are anticipating future regulatory changes and market advantages 

Across the pond, there are a few other certification standards that are more common than SQF. One of these is ISO 22000, which is the certification for the food-related standard created by the International Organization for Standardization (ISO) in Europe. It is not recognized by GFSI but is the primary system used in Europe. If your market is exclusively in the EU, it might be a good choice for you in the future. However, to date, there is no indication that any cannabis company has achieved ISO 22000 certification. Some cannabis companies have attained certification for other ISO standards like ISO 9001:2015, which specifies requirements for quality control systems, and ISO/IEC 17025 for laboratory testing. These are generally more relevant for the pharmaceutical industry than food and beverage, but still apply to cannabis.

There is the perception that cannabis is more accepted in EU countries like the Netherlands, but the regulatory attitude to cannabis is complicated. In the Netherlands, for example, cannabis isn’t actually legal – “coffee shops” fall under a toleration policy that doesn’t include regulation. Medical cannabis in the Netherlands is all produced by one supplier and several countries in the EU allow for licensed distribution and import, but not domestic production. Various EU countries are trying to keep up with the legalization trend, however. The Czech Republic, Germany, and others all recently introduced legislation for domestic production of cannabis for medical use. For companies with their eye on the EU, it is crucial to watch which regulatory requirements will be implemented in each market and how.

The last certification standard to mention is the result of a compromise between ISO and the more HACCP oriented programs like SQF. FSSC 22000 (Food Safety System Certification) tries to address the gaps between ISO 22000 and GFSI-recognized certifications by introducing another component called PAS 220. Since it is recognized by GFSI, FSSC 22000 is starting to get more traction in the food industry because it makes products a bit easier to export to the EU. FSSC 22000 satisfies the EU ISO standards but isn’t as closely tied to HACCP. We will be keeping an eye on this one.

Final Takeaway

The food industry has a lot to offer cannabis companies that are anticipating future regulatory changes and market advantages – but it’s difficult for cannabis companies to understand all the options available and how each apply to their specific products. While markets adjust beyond the preliminary issue of legality, it’s crucial for companies to look forward and comply with safety and quality standards like SQF. Companies who strive for SQF certification (or other GFSI-recognized certifications as they become available) will find themselves far better prepared to seize market share as cannabis markets blossom.

Canada Legalizes Recreational Use of Cannabis

By Marguerite Arnold
1 Comment

In what has already been called an “historic” vote, the Canadian Senate voted to legalize cannabis on June 19.

C-45 – or the Cannabis Act, passed overwhelmingly in the Senate by a vote of 52-29. Canadian Prime Minister Justin Trudeau has subsequently announced that the legislation will pass into law on October 17. The intent behind the legalization effort was to cripple organized crime and protect minors.

Only one other country in the world has taken such a dramatic step – Uruguay.

Now what?

The Medical Discussion Is Just Getting Underway

While legalization advocates and the increasingly corporate industry have everything to celebrate, this does not necessarily change the other conversation on the ground – in fact it only strengthens it.

Clearly this is a blow against prohibition still in force just south of the border in the U.S. This move alone is also likely to drive the debate in an environment where California and other states are clearly thumbing their noses at the federal government and proceeding apace with its own (and largest) U.S.-based marketplace.

However, there is another topic floating around this conversation. If cannabis is “harmless” enough for recreational use, its use for medical purposes has become the third rail that is now driving the conversation in other places – most certainly Europe.In the meantime, Canadian firms are in an unparalleled position to enter global markets (as they have already begun to do) and set the tone and debate.

Here, full legalization is absolutely off the table as policymakers and scientists begin to seriously contemplate integration of cannabinoids into comprehensive health systems. This week’s dramatic announcement in the UK to that effect, which came the same day as the Canadian vote, is one indication of that. Germany’s own cautious foray into medical use is another. The change in the law last year mandating public health insurance coverage of the same has created a population of 15,000 patients in the last year with many more lining up to obtain it. This population of patients will reliably use more cannabis every month than even the most dedicated recreational consumer.

What Comes Next?

Four and a half years after Colorado took the plunge, the world of cannabis acceptance has clearly changed – and for good.

But what is the next step? Clearly the pressure is now on in the U.S. to consider rescheduling to at least a Schedule II if not Schedule III drug. Marinol, the synthetic version of the drug, became a Schedule III drug in 2010. Epidiolex, GW Pharma’s drug derived from cannabis, just received FDA approval too.  GW Pharma is the only British company allowed to develop cannabinoid medications. Let’s see how long that flag flies in the new commonwealth, with Canada fast behind the UK now as the two compete for the title of largest canna exporter. Globally.

The drug war, in other words, is finally coming to close for cannabisHowever full legalization – even in the United States and most certainly in Europe – is at least several years away.

In the meantime, Canadian firms are in an unparalleled position to enter global markets (as they have already begun to do) and set the tone and debate. How they will position themselves – as medical pharmaceutical or recreational companies – is another discussion that is still unfolding. Particularly because cannabis is a hybrid substance. And further, it is not entirely understood (nor has of course it been studied) where cannabis stops becoming a drug. If a consumer uses CBD, for example, as part of a wellness routine but  also heads off a more serious condition, is the use of the plant “medical” or “recreational?”

These are all questions now on the table. But at least they are.

The drug war, in other words, is finally coming to close for cannabis. But the horizons beyond that, widely unexplored, promise blue ocean opportunities for decades to come. And not “just” in recreational use, but in the amazing worlds of science, technology and medicine that now lie within reach.

Epidiolex-GW

FDA Approves GW Pharma’s Epidiolex

By Aaron G. Biros
No Comments
Epidiolex-GW

According to a press release, the U.S. Food and Drug Administration (FDA) approved GW Pharma’s drug Epidiolex for the treatment of rare forms of epilepsy. Just a few months ago, news broke of a very encouraging FDA panel assessment, which indicated a positive outlook for the drug’s approval.

In the press release, FDA Commissioner Scott Gottlieb, M.D appeared to indicate an open willingness to explore the medical benefits of cannabis. “This approval serves as a reminder that advancing sound development programs that properly evaluate active ingredients contained in marijuana can lead to important medical therapies,” says Gottlieb. “And, the FDA is committed to this kind of careful scientific research and drug development.” He went on to add:FDAlogo

Controlled clinical trials testing the safety and efficacy of a drug, along with careful review through the FDA’s drug approval process, is the most appropriate way to bring marijuana-derived treatments to patients. Because of the adequate and well-controlled clinical studies that supported this approval, prescribers can have confidence in the drug’s uniform strength and consistent delivery that support appropriate dosing needed for treating patients with these complex and serious epilepsy syndromes. We’ll continue to support rigorous scientific research on the potential medical uses of marijuana-derived products and work with product developers who are interested in bringing patients safe and effective, high quality products. But, at the same time, we are prepared to take action when we see the illegal marketing of CBD-containing products with serious, unproven medical claims. Marketing unapproved products, with uncertain dosages and formulations can keep patients from accessing appropriate, recognized therapies to treat serious and even fatal diseases.

According to the press release, the drug was studied in three randomized, double-blind, placebo-controlled clinical trials with 516 patients who have either Lennox-Gastaut syndrome or Dravet syndrome, the two rare forms of epilepsy the drug is now approved to treat. Epidiolex is an anti-epilepsy drug, taken in a syrup form, with the main active ingredient being cannabidiol (CBD), and less than 0.1 % THC.

Former Deputy Attorney General James M. Cole

James Cole to Keynote Cannabis Business Summit

By Aaron G. Biros
No Comments
Former Deputy Attorney General James M. Cole

The National Cannabis Industry Association (NCIA) announced last week their newest addition to the Cannabis Business Summit: former Deputy Attorney General James M. Cole as the keynote speaker. Cole will be joining Aaron Smith, executive director of NCIA, for a fireside chat where they will take a look at his legacy in the cannabis industry as author of the Cole Memo. They will also discuss his predictions for the future of federal cannabis policy under the Justice Department.

Former Deputy Attorney General James M. Cole
Former Deputy Attorney General James M. Cole

As author of the Cole Memo, James Cole was an instrumental figure in the fight for legal cannabis in the United States. The Cole Memo was a policy directive issued in 2013 that instructed U.S. attorneys general in states that have legalized cannabis to use their resources in prosecuting Controlled Substances Act offenses only if they violated specific federal enforcement priorities. The Obama-era policy directive essentially served to protect state-legal medical cannabis businesses from federal raids and prosecution as long as they were abiding by the state’s regulations.

In January of 2018, current Attorney General Jeff Sessions rescinded the Cole Memo. The new policy leaves it up to federal prosecutors to determine how they wish to enforce federal law and the Controlled Substances Act.

At the Cannabis Business Summit, James Cole will share insights on the future of the Justice Department’s policy towards cannabis. “The Justice Department holds a huge number of cards when it comes to the future of our industry, but its inner workings and internal debates on cannabis policy aren’t well understood,” says Smith. “That’s what makes this keynote with Jim Cole so exciting and valuable for anyone trying to predict what comes next for the industry.”

This year’s 5th annual Cannabis Business Summit will be held in San Jose, California on July 25 to 27. Cole and Smith’s keynote discussion will be held on Thursday, July 26.

Dr. Ed Askew
From The Lab

Quality Plans for Lab Services: Managing Risks as a Grower, Processor or Dispensary

By Dr. Edward F. Askew
No Comments
Dr. Ed Askew

Editor’s Note: The views expressed in this article are the author’s opinions based on his experience working in the laboratory industry. This is an opinion piece in a series of articles designed to highlight the potential problems that clients may run into with labs. 

This article is the first in a series that will look into the risks any user of laboratory services (growers, processors or dispensary owners) will face from the quality systems in place in the laboratory. I will discuss specific risk areas in clear and understandable language so as to not obscure the substance of the article series with abbreviations and nomenclature that is not familiar with the reader. Subjects of the articles that follow will focus on the specific laboratory certification or accreditation requirements and how the user may find out if their risks are addressed. As these articles are meant to be interactive with the reader, users are encouraged to send questions or suggested topics to the author.

This article will be an introduction to the typical laboratory process that generates the “paperwork wall” and how it might impact the user.My experience with laboratory certification or accreditation (difference between the two discussed later in this article) comes from over 30+ years in the environmental chemistry field. My experiences include working under the Clean Water Act, Safe Drinking Water Act, FIFRA (pesticides) and ISO 17025 laboratory analyses and laboratory management. I have also received training to perform ISO 17025 and EPA Drinking Water audits. During this time I have been audited as a laboratory analyst/laboratory manager and have performed audits.

As such, I can open up the laboratory structure beyond the sterile “paperwork wall” that has been constructed to allow the user to see the quality of data that is used in final reports that can wreak havoc. This article will be an introduction to the typical laboratory process that generates the “paperwork wall” and how it might impact the user.

One of the common misconceptions that a user has with a “certified or accredited” laboratory is that procession of a certificate indicates that ALL laboratory analyses produced are accurate and precise. I liken this to the “paperwork wall” that laboratories produce when the user questions any results reported to them. The laboratory management assumes that they have answered the user complaint (i.e. a certified/accredited laboratory cannot make a mistake) and the user will not pursue further questions once the certificate is produced.Accreditation does not guarantee that the laboratory personnel can perform the analyses the user is paying for; just that the laboratory’s paperwork has been audited.

First off, let’s look at what the difference between the terms certified laboratory vs. accredited laboratory. These simple words mean specifically different types of laboratories. According to the NIST National Voluntary Laboratory Accreditation Program (NVLAP):

  • Certification is used for verifying that personnel have adequate credentials to practice certain disciplines, as well as for verifying that products meet certain requirements.
  • Accreditation is used to verify that laboratories have an appropriate quality management system and can properly perform certain test methods (e.g., ANSI, ASTM, and ISO test methods) and calibration parameters according to their scopes of accreditation.

So, how does that impact the user?

  • If your state or 3rd party certificate only accredits a laboratory, then the accreditation agency only inspects the laboratory’s quality program as it applies to written documents and static equipment. (e.g. The quality manual is written and the standard operating procedures (SOPs) are in place).
  • Accreditation does not guarantee that the laboratory personnel can perform the analyses the user is paying for; just that the laboratory’s paperwork has been audited.
  • Certification on the other hand says that the laboratory personnel are qualified to perform the laboratory analyses and that the final laboratory results meet specific (certain) requirements. In other words, the laboratory’s quality plan and SOPs are met.

There are three different paths that are utilized by state cannabis control agencies to accredit or certify a cannabis laboratory.

  • ISO 17025: The ISO laboratory quality standard for laboratory accreditation is the most broadly used. ISO 17025 is an international standard and its implementation in the United States is regulated by ILAC. There are three 3rd party companies that audit for and award ISO 17025 accreditation certificates. They are Perry Johnson Laboratory Accreditation Inc., ANAB and A2LA.
  • TNI: The NELAC Institute standards are utilized by one state to handle their cannabis laboratory accreditation.
  • States: Some states have tried to blend an ISO 17025 requirement with their own state’s certification requirements to produce a mixed accreditation-certification program. But, this type of program may rely on two or more agencies (e.g. ISO 17025 3rd party auditors communicating with state auditors) to cover all specific laboratory areas.

PJLAIn two of the paths above, the final result is that the laboratory receives accreditation. That means that only the quality management system and the scope (e.g. SOPS, laboratory instruments, etc.) have been audited, not the laboratory personnel or their capabilities. The third pathway may produce a certified laboratory or may not.

To provide an example of where an accredited laboratory followed their paperwork but produced inadequate results:

  • I received a laboratory report for organic chemical analyses of a client’s process.
    • The laboratory results placed the user in noncompliance with the state and federal regulatory limits.
    • But, the laboratory result contained data flags (e.g. additional information that explains why the laboratory result failed the laboratory’s quality requirements).
    • The laboratory still received payment from the user as the laboratory performed the analyses.
  • I had to explain to the regulatory agency that some of the data flags when investigated showed:
    • The laboratory failed to use the approved analytical method.
    • The detection level for the regulatory chemical was so low that the laboratory had no instrument capable to see those chemicals at the concentrations reported by the laboratory.
  • The state regulators accepted the explanation I provided and the user was no longer under a regulatory administrative order.
  • But, when I presented this information to the accreditation agency that accredited this laboratory I was informed:
    • The laboratory flagged the data so it can be reported to the user.
    • If the user wanted more from the laboratory, then the user will have to outline their specific requirement in a quality contract with the laboratory. (i.e. If the laboratory identifies the problems then they can report the data no matter what happens to the user).

So now, what is being done behind the “paperwork wall”? Areas such as those listed below can impact the results received by the user.

  • Laboratory quality culture: What does the laboratory staff think about quality in their normal daily work?
  • Laboratory staff competence: What is the level of training and real world competence of the staff that actually works on the analyses?
  • Laboratory capabilities: Does the laboratory actually have the laboratory instruments and equipment that can perform the analyses the user needs?
  • Laboratory quality control parameters: What is in the quality manual and does it make sense?
  • Laboratory analytical method validation: Are the analytical methods used by the laboratory validated by approved statistical procedures?

What should the user have in place to limit their risks from laboratory analyses?

  • Failsafe sampling preparation plans: Make sure the user samples for the laboratory are collected correctly.
  • Failsafe’s on laboratory sample reports: Protect the user from bad laboratory reports.
  • User auditing of the laboratory: Go to the laboratory and see if the laboratory can pass muster.

What’s Next: The next article will go behind the laboratory “paperwork wall” to detail the culture that impacts the user results negatively and how that can be recognized. Follow-up articles will help users developing quality plans that identify risks and how to limit them.

labsphoto

EVIO Labs Expands Ahead of California Testing Deadline

By Aaron G. Biros
No Comments
labsphoto

In a few short weeks, the regulations in California’s cannabis market will expand to include more laboratory testing. The previous exemption for selling untested product will be eliminated come July 1st, meaning that every product on dispensary shelves will have to be tested for a number of contaminants.

EVIO labs photo
Pesticide testing, expanded residual solvent testing and foreign materials testing will be added come July 1st.

According to William Waldrop, chief executive officer and co-founder of EVIO Labs, the state is currently finalizing a revision to the existing emergency rules, which is designed to target the potential supply bottleneck situation. “To help alleviate the bottleneck, the state is eliminating the field duplicate test on every batch of cannabis or cannabis products,” says Waldrop. “This will give the labs additional bandwidth to process more batches for testing.” So one test per batch is the rule now and batch sizes will remain the same. This, of course, is contingent on the state finalizing that revision to the emergency regulations.

William Waldrop, chief executive officer and co-founder of EVIO Labs
William Waldrop, chief executive officer and co-founder of EVIO Labs

In addition to that change, the state will expand the types of testing requirements come July 1st.  New mandatory pesticide testing, expanded residual solvent testing and foreign materials testing are added in addition to the other tests already required.

With July 1st quickly approaching, many in California fear the rules could lead to a major market disruption, such as the previously mentioned bottleneck. Waldrop sees the elimination of duplicate testing as a preventative measure by the state. “It is a good move for the industry because it allows labs to test more batches, hopefully reducing the bottleneck come July,” says Waldrop. Still though, with only 26 licensed laboratories in the state as of March, testing facilities will have to meet higher demand, performing more tests and working with more clients.

EVIO Labs is preparing for this in a number of ways. They already have a lab in Berkeley and are working to expand their capacity for more analyses. In addition to their lab in Berkeley, the company is working to get three more locations operational as quickly as possible. “Right now, EVIO Labs is expanding through the identification of new market locations,” says Waldrop. “We have announced the acquisition of a facility in Humboldt and we are outfitting it for state-mandated testing. We have secured a location in LA, and licensing for LA just began as of June 1stso we are going through the local licensing process at this time. We are still moving through the licensing process for our facility in Costa Mesa as well.”

EVIO Labs photo
Labs will soon have to deal with higher demand, meaning more samples and more clients

“In the meantime, we have expanded capacity of personnel in our Berkeley facility to support our client base until these other locations come online,” says Waldrop. “We are refining our business, bringing on additional equipment and more resources.” While the rules haven’t been implemented yet, Waldrop says he’s seen an uptick in business with licensed operators requesting more testing for the new July 1st standards.

While some might feel a bit panicky about how the new standards could disrupt the market, Waldrop says his clients are looking forward to it. “Our clients are very happy with the proposed new rules, because it reduces the cost of testing per batch, which will inherently reduce wholesale costs, making cannabis more affordable for patients and recreational users.”

Pennsylvania Medical Cannabis Program Blossoms

By Aaron G. Biros
1 Comment

Pennsylvania’s medical cannabis program may be young, but the industry in that state is off to a burgeoning start. Back in 2016, the state legalized medical cannabis. In 2017, the PA Department of Health began accepting applications for licenses and announced the first 12 winning applications. On February 15th, 2018, medical cannabis became available for more than 17,000 patients that registered in the program.

In March of this year, Governor Tom Wolf announced two more dispensaries were approved to operate as well as another grower/processor licensee. At that time, the press release indicated more than 21,000 patients have registered to participate in the medical cannabis program.

Then in April, Governor Wolf announced Phase Two of their medical cannabis program, allowing the industry to grow even more. That allowed for 13 new grower/processor permits and 23 new primary dispensary permits, according to a press release, which moved the total up to 25 grower/processors licensees and 50 dispensary licensees.

Just weeks later after that announcement, the PA Department of Health adjusted their program to allow patients access to whole plant, dried flower and opened up more qualifying conditions. The qualifying conditions added to the list now include cancer remission therapy as well as opioid-addiction therapy, which are two very notable additions. According to an April 6threport, 28,508 patients and 2495 caregivers registered with the program.

On May 15th, Governor Wolf approved eight universities to participate in a groundbreaking program, allowing Pennsylvania to take the first steps towards clinical research for medical cannabis. This research program would be the first of its kind in the country, allowing research institutions to explore the drug. The excitement was put on hold, however, when a Pennsylvania judge halted the program with an injunction. A handful of growers and dispensary owners in PA filed suit to stop the program on grounds that it violated the original intent of the law. State Representative Kathy Watson from Bucks County, the author of the research program, called the suit “pathetic because it’s all about the money.” We’ll follow closely with any new developments as they come.

Steve Schain, Esq. practicing at the Hoban law Group

Steven Schain, Esq., senior attorney at Hoban Law Group, a global cannabis law firm, represents multiple cannabis-related businesses in Pennsylvania. He says the program’s roll out has been fast with solid growth. “Within two years of the legislation’s enactment, Pennsylvania’s medical marijuana program has exceeded expectations with controlled, sustainable and quality growth,” says Schain. “The Pennsylvania Department of Health established ambitious goals, which they met timely and created a statewide program servicing over 10,000 patients in record time. Looming ahead is New Jersey’s adult use program, the anticipated robustness of which could undermine vigorous sales in southeastern Pennsylvania’s marijuana-related businesses.”

On May 30th, Philadelphia welcomed their first medical cannabis dispensary, with a location opening up their doors to patients in Fishtown. Now reports are coming in that say more than 37,000 patients have registered to date, with over 16,000 who have received their ID cards and medical cannabis at a dispensary.

Even though the research program might be on hold for now, Pennsylvania’s medical cannabis program is growing at a fast pace. The market there has blossomed in just a few short months to a whopping 37,000-registered patients, according to a press release form Governor Wolf’s office. Some say an additional 200,000 patients could qualify. With the second phase in sight, it seems Pennsylvania is on track to become a hotbed for business and research, developing into a massive medical cannabis marketplace soon. Stay tuned for more updates.

HACCP

Hazard Analysis and Critical Control Points (HACCP) for the Cannabis Industry: Part 4

By Kathy Knutson, Ph.D.
No Comments
HACCP

In Part 3 of this series on HACCP, Critical Control Points (CCPs), validation of CCPs and monitoring of CCPs were defined. When a HACCP plan identifies the correct CCP, validates the CCP as controlling the hazard and monitors the CCP, a potential hazard is controlled in the manufacturing and packaging of cannabis-infused edibles. The food industry is big on documentation. If it’s not documented, it did not happen. The written hazard analysis, validation study and monitoring of CCPs create necessary records. It is these records that will prove to a customer, auditor or inspector that the edible is safe. Here in Part 4, more recordkeeping is added on for deviation from a CCP, verification and a recall plan. 

Take Corrective Action When There Is a Deviation from a Critical Control Point

Your food safety team conducts a hazard analysis, identifies CCPs and decides on monitoring devices, frequency and who is responsible for monitoring. You create an electronic or paper record of the monitoring for every batch of edible to document critical limits were met. Despite all your good efforts, something goes wrong. Maybe you lose power. Maybe the equipment jams. Nothing is perfect when dealing with ingredients, equipment and personnel. Poop happens. Because you are prepared before the deviation, your employees know what to do. With proper training, the line worker knows what to do with the equipment, the in-process product and who to inform. In most cases the product is put on hold for evaluation, and the equipment is fixed to keep running. The choices for the product include release, rework or destroy. Every action taken needs to be recorded on a corrective action form and documents attached to demonstrate the fate of the product on hold. All the product from the batch must be accounted for through documentation. If the batch size is 100 lb, then the fate of 100 lb must be documented.

Verify Critical Control Points Are Monitored and Effective

First, verification and validation are frequently confused by the best of food safety managers. Validation was discussed as part of determining CCPs in Part 3. Validation proves that following a CCP is the right method for safety. I call validation, “one and done.” Validation is done once for a CCP; while verification is ongoing at a CCP. For example, the time and temperature for effective milk pasteurization is very well known and dairies refer to the FDA Pasteurized Milk Ordinance. Dairies do not have to prove over and over that a combination of time and temperature is effective (validation), because that has been proven.

I encourage you to do as much as you can to prepare for a recall.A CCP is monitored to prove the safety parameters are met. Pasteurization is an example of the most commonly monitored parameters of time and temperature. At a kill step like pasteurization, the employee at that station is responsible for accurate monitoring of time and temperature. The company managers and owners should feel confident that CCPs have been identified and data are being recorded to prove safety. Verification is not done by the employee at the station but by a supervisor or manager. The employee at the station is probably not a member of the food safety team that wrote the HACCP plan, but the supervisor or manager that performs verification may be. Verification is proving that what was decided by the food safety team is actually implemented and consistently done.

Verification is abundant and can be very simple. First, every record associated with a CCP is reviewed by a supervisor or manager, i.e. someone who did not create the record. This can be a simple initial and date at the bottom of the record. Every corrective action form with its associated evaluation is verified in the same way. When HACCP plans are reviewed, that is verification. Verification activities include 1) testing the concentration of a sanitizer, 2) reviewing Certificates of Analysis from suppliers, 3) a review of the packaging label and 4) all chemical and microbiological testing of ingredients and product. The HACCP plan identifies CCPs. Verification confirms that implementation is running according to the plan.

Verification is like a parent who tells their child to clean their room. The child walks to their room and later emerges to state that the room is clean. The parent can believe the word of the child, if the child has been properly trained and has a history of successfully cleaning their room. At some frequency determined by the parent, the room will get a parental visual check. This is verification. In the food industry, CCP monitoring records and corrective action must be reviewed within seven days after the record is created and preferably before the food leaves the facility. Other verification activities are done in a timely manner as determined by the company.

Food processing and sanitation
Product recalls due to manufacturing errors in sanitation cause mistrust among consumers.

Write a Recall Plan

In the food industry, auditors and FDA inspectors require a written recall plan. Mock recalls are recommended and always provide learning and improvement to systems. Imagine your edible product contains sugar, and your sugar supplier notifies you that the sugar is recalled due to glass pieces. Since you are starting with the supplier, that is one step back. Your documentation of ingredients includes lot numbers, dates and quantity of sugar.You keep good records and they show you exactly how much of the recalled lot was received. Next you gather your batch records. Batches with the recalled sugar are identified, and the total amount of recalled sugar is reconciled. You label every batch of your edible with a lot code, and you identify the amount of each affected lot and the customer. You have a press release template in which you add the specific information about the recall and affected lots. You notify every customer where the affected edible was shipped with a plan to return or destroy the edible. When you notify your customers, you go one step forward.

How would your company do in this situation? I have witnessed the difficulties a company faces in a recall when I was brought in to investigate the source of a pathogen. Food safety people in my workshops who have worked through a recall tell me that it was the worst time of their life. I encourage you to do as much as you can to prepare for a recall. Here are two good resources:

Please comment on this blog post below. I love feedback!

Cannabis Report

German Health Insurer Issues First Look at Impact of Medical Cannabis

By Marguerite Arnold
No Comments
Cannabis Report

If anyone (read Auslanders) had any illusions that the German take on medical cannabis was going to be casual or unscientific if not painstakingly documented, think again.

Techniker Krankenkasse (or TK as it is referred to by the locals) is one of Germany’s largest public health insurance companies. In other words, it is a private company that is required to provide so called “statutory” health insurance which covers 90% of Germans.

As such, they are also on the front lines now of the medical cannabis debate. Approximately one year after the new law requiring public health insurance companies like TK to reimburse cannabis claims went into effect, the company has just issued what would surely be a best-seller if it were being sold.All of the medical cannabis now being prescribed and reimbursed is coming from abroad.

The Cannabis Report, as it is titled, produced with the help of professors at the University of Bremen, is also the first of its kind. In its pages, along with the corporate summary produced for the recent press conference in Berlin, are several fascinating snapshots of what is going on.

By the numbers.

The Cannabis Report

For those who cannot understand German, this summary by Business Insider is quite educational. Here are the major takeaways: There are now almost 16,000 German patients who are receiving some kind of medical cannabis by prescription. From a doctor. These patients are also paying about $12 for their monthly supplies – even if they have to wait for reimbursement. This is in contrast to the 1,100 patients who managed to obtain cannabis by prescription and pay for it themselves before the law changed last spring.

Do the math and that is a 1,450% uptick. Add in the additional 15,000 left out of this report who are getting cannabis prescribed but their claims turned down, and that is an even more amazing story.

Cannabis ReportHere is the next obvious fact: All of the medical cannabis now being prescribed and reimbursed is coming from abroad. A significant amount is still coming from Holland. The rest? Canada.

For that reason, the cost of medical cannabis is a major concern, along with the medical efficacy of cannabis and the authors’ frustrations about dosing.

The most interesting takeaway? Chronic pain and spasticity arehigh on the list of prescriptions (MS is currently the only condition which is “on label” for cannabis). So is Epilepsy and AIDS. Most interestingly are the high numbers for ADD. This is also highly significant in a country where amphetamine prescriptions for the same are almost unheard of.

TK, like the other health insurers who have started to provide numbers, also approved approximately two thirds of the requests they received. And it has cost them $2.7 million. That bill will begin to reduce as Germany cultivates medical cannabis domestically. However, the tender bid, which now apparently includes 11 contenders, is still undecided, with growing apparently pushed off now until (at the earliest) sometime next summer.

The bottom line, however, in the report from Socium, a university-based think tank that focuses on social inequality, is that cannabis is a drug that should also be treated like any other medication. Even though study authors conclude that so far, they do not find cannabis to be as “effective” as other drugs, they clearly state that the drug does help patients.

An Equally Interesting Industry Snapshot

Flip to page 20, however, and the authors also confirm something else. The top companies providing medical cannabis to German publicly insured patients who are getting reimbursed are Bedrocan, Aurora andCanopy. Aurora’s brands clock in at the highest percentage of THC, although their German importer Pedianos, clearly offers a range of products that start at less than 1% and increase to 22%. MedCann GmbH (renamed Spektrum last year) is essentially providing the rest, and ranges of THC at least, that go from 5.4%-16.5%. They also provide the products with the highest percentages of CBD.

Page 20 of the Cannabis Report produced by TK
Page 20 of the Cannabis Report produced by TK

Unlike the other companies, Canopy’s “brands” are also showing up in ostensibly both medical and government reports (Houndstooth, Penelope, Princeton and Argyle). This is interesting primarily because the German government (and regulatory requirements) tends to genericize medications as much as possible.

Dosing, Impact, Results

The next page of the report is also fascinating. Namely a snapshot of what kind of cannabis is being prescribed and at what doses. Patients who are obtaining cannabis flower are getting up to 3 grams a day. Dronabinol, in stark contrast (which is still the only form of the drug many German patients are able to get), is listed at 30mg.

Unlike any corporate report so far, the study also discusses consumption methods (including, charmingly, tea). It is impossible to forget, reading this, how German and structured this data collection has clearly been. There are several fairly stern referrals to the fact that cannabis should not just be prescribed for “vague” (read psychological) conditions but rather aspecific symptomology (muscle spasms and severe pain).

There is also great interest in how flower differs from pills. And how long the effects last (according to the authors, effects kick in about 2-15 minutes after dosing and last for 4 hours). This is, of course, an accurate picture of what happens to just about every patient, in every country. What is striking, particularly to anyone with an American perspective, is how (refreshingly) clinical much of this basic data collection and discussion is.

And no matter how much the authors call for more research, they clearly have observed that cannabis can have positive, and in many cases, dramatic impacts on patients. According to the handy graphs which are understandable to English speakers, study authors find significant evidence that the drug significantly helps patients with severe pain and or muscle spasms – see MS and Epilepsy, AIDS patients with wasting syndrome and paraplegics (wheelchair bound individuals). Authors list the “strong possibility” that the drug can help with Tourette’s and ADHD. Fascinatingly, however, so far, German researchers are not impressed with the efficacy of the drug for Glaucoma. “Psychological” and psychiatric conditions are also low on the list.

Regardless, this is an important line in the sand. As is the clear evidence that cannabis has efficacy as medication.

The great German cannabis science experiment, in other words, is well underway. And further, already starting to confirm that while many questions remain, and more research is required, this is a drug that is not only here to stay, but now within reach of the vast majority of the population.