Tag Archives: hemp

The New Delta 8 THC Market: A Q&A with the Founders of DeltaVera

By Cannabis Industry Journal Staff
No Comments

Delta 8 THC (delta-8-tetrahydrocannabinol) sprung onto the scene late last year in a big way. While similar to the much more widely-known delta-9-tetrahydrocannabinol that produces a lot of the psychoactive effects associated with ingesting cannabis, delta 8 THC can be derived from hemp with less than 0.3% delta 9 THC. Given the legality of hemp-derived products following the 2018 Farm Bill, delta 8 THC can be produced in some states where delta 9 THC still remains illegal.

While delta 8 is considerably different in its psychoactive effects from its cousin, it does overlap in some ways. It can still produce some more manageable, less “heady” versions of delta 9’s effects like euphoria and relief found in the many medical applications of cannabis. DeltaVera, a company that launched less than six months ago, aims to share that more manageable THC experience with the masses.

The sharp rise of the delta 8 market means that DeltaVera is poised for growth. With distribution contracts inked, exciting partnerships in the works and a large surge in consumer demand, the founders of DeltaVera are at the ready to capitalize on this lesser-known molecule and bring it to the forefront of the nascent hemp industry. Starting out as a small family business, Sam and Craig Andrus launched DeltaVera with their third founder, PK Isacs.

We sat down with Sam Andrus and PK Isacs, two of the founders of DeltaVera, an award-winning brand, to ask them about their plans for expanding, how they became entrepreneurs and why they think delta 8 is the next big thing in cannabis.

Cannabis Industry Journal: Tell me about your company. How did you get started in the cannabis space?

Sam Andrus, cofounder of DeltaVera

Sam Andrus: I had an early start in the Delta 8 THC industry on the sales side. We knew we wanted to get into the market, but observed a number of aspects in the space that needed to be addressed: the most important being quality control, transparency and brand trust. With this as a backdrop we launched DeltaVera. Highly curated, approachable, transparent and value-oriented with a strong focus on reliability and trust. The DeltaVera family is made up of three operating managers and the sales team. We are three founders with complementary skill sets: Craig, who has domain expertise in finance, governance and startups, PK who has experience in business and marketing and my sales experience round out the management team.

We have yet to solicit outside capital and have funded ourselves internally as we create our brand and refine our product offering. That said, we are seeing numerous opportunities in strategic partnerships and expansion, which will require additional capital. And we are excited to start this expansion process.

CIJ: What makes the Delta 8 space so remarkable? Why are your SKUs primarily formulated with Delta 8?

Sam Andrus & PK Isacs: Delta 8 THC is an alternative/complement to delta 9 THC, CBD and other cannabinoids. Its status as non-federally scheduled and its less potent psychoactive effects make it appealing in its own right. Delta 8 THC can help with healthier sleep patterns and with pain management in a way that CBD can’t, without a strong “head high” that many of our customers like to avoid. Additionally, it’s shorter lived and doesn’t give you any negative residual effects, which makes it beneficial for people on tighter schedules. These factors make it easier for us to approach markets that are inaccessible to both delta 9 THC and CBD, such as older demographics. In a world where delta 9 is legal, there will still be a place for delta 8.

PK Isacs, cofounder of DeltaVera

While we are very proud of our suite of smokable products, we are currently focusing our efforts on edibles: our Delta Discs are our mainstay, though we are expanding our product line to include nano-emulsion products such as liquid shots and nano gummies. They strongly appeal to our target demographics; additionally, the edible market is growing very quickly in states that allow the sale of hemp-derived consumables.

CIJ: Continuing on the delta 8 front – right now it is considered a cannabinoid legal for interstate commerce, much like CBD, correct? Do you think that will change? 

Sam & PK: That is currently the case. Delta 8 THC is newer, and as such, it has even more ambiguity in regards to its legal future. But what’s most exciting (and our most challenging task right now), is informing consumers about the benefits of delta 8. We are one of a few companies solely focused on the consumption of delta 8, because of its similar benefits to delta 9 and CBD – our products are the perfect happy medium: a high with less psychoactive effects and all the health benefits of both, making it a desirable alternative to all consumers.

In addition, we are looking at some combinations of delta 8/CBDA, delta 8/CBN, delta 8/THCV and are very excited to begin test marketing these combinations. These proprietary blends of minor/major cannabinoids can cater to a niche target demographic as they can be curated to have very specific and unique effects when combined in the right quantities with the right delivery system. They will also be able to serve a larger customer base as these cannabinoids can all be derived from hemp.

CIJ: How do you think the FDA would regulate your product? Do you welcome federal oversight?

DeltaVera gummy products

Sam & PK: Regardless of whether or not we are regulated we are committed to a high level of transparency and trust. As noted in unregulated markets, like the supplement market, you don’t always know what you are getting in terms of purity and potency. We are changing that paradigm by adding unique QR codes to our sustainable containers which reference COAs [certificates of analyses] specific to the contents of the case. A lot of the space is naturally trying to avoid that kind of regulatory interference, but we are currently doing our best to self-regulate and make sure that our consumers are fully informed about what they’re receiving.

We will be the first to say that there aren’t as many laws governing delta 8 THC as there could be, and that’s why we’ve spent so much time and money on self-regulation. All of our products have very clear nutritional information in addition to test results down to one hundredth of one percent. As for what category these products should fall under: we have a wide range of products, and each one has its place under a different umbrella of regulation. We hope that the federal government will take advantage of the vast array of studies that have been conducted on delta 8 THC since it was first extracted in 1942 to step up to this product that is, in our experience, helping so many people.

CIJ: Tell me about how your business has grown so far.

Sam & PK: When we sell to a retailer, we try to provide them with as much material as possible on what delta 8 THC is and what differentiates DeltaVera’s products. Still, we’ve had some difficulty in places with limited delta 8 THC exposure. That being said, when someone tries our product, there is a high likelihood that they become a repeat customer (and they tell their friends). Given our newness to the market (Our brand launched in January 2021) initial indications are – we have a good rate of repeat orders, and we’ve heard the same from our brick-and-mortar partners.

The DeltaVera Delta Discs

Our distribution network has grown tremendously; we’ve taken a three-pronged approach to distribution: partnerships with like-minded companies in compatible spaces, an e-commerce market on our website, and a commission-based sales structure to reach brick-and-mortar establishments. To date, most of our distribution takes place in the latter two spaces, due to the added time and commitment involved in forming partnerships. As a company we are taking a more creative approach on how we present our product and alternative ways to consume it. We have some exciting collaborations in the works; follow us on social media to stay up to date with everything on the horizon. We are very enthusiastic about our partnerships however, with our first collaboration with WaxNax, a Denver-based company revolutionizing the cannabis dabbing experience, hitting the shelves this week.

CIJ: What is your marketing plan?

Sam & PK: We are working on building a social media presence. Natalie, who is leading the charge on social media, recommended we take an organic approach to build our base. We want to avoid falling into the “paid ad”, “spam” vibe as long as we can. We are currently focused on building a community through delta 8. Our mission is making DeltaVera a brand for all lifestyles, athletes, creatives, travelers or business professionals. We’re confident in our product, and have faith that it can speak for itself.

CIJ: How do you ensure quality in your products?

Sam & PK: Our products are of guaranteed quality with our licensed growers and manufacturers. We provide COAs, informing the retailer & consumer about each product, displaying full panel tests on cannabinoids and heavy metals. These preliminary and secondary lab tests ensure our product is below 0.3% delta 9 THC in all our products. Through third-party labs, we run full panel tests which pick up a variety of cannabinoids; for most of our products we focus on the level/purity of delta 8. Our products are screened for both contaminants and heavy metals.

All this information is housed conveniently on our website that can be reached through our QR codes.

CIJ: What are your plans to grow the business in the future? 

Sam & PK: We feel very confident in our three methods of distribution: partnerships, e-commerce and a commission-based sales structure. We’ve made tremendous ground on partnerships, and are very excited about numerous partnerships we have in the pipeline. We’ve reached out to some incredible groups in the CBD space, the THC space and a few groups that you wouldn’t normally associate with cannabinoids, but with whom we’ve workshopped some really creative ideas that we’re really looking forward to bringing to market.

Readers can use promo code “CIJ” to get 15% off their first order here. 

Defining Hemp: Classifications, Policies & Markets, Part 2

By Darwin Millard
2 Comments

In Part 1 of this series we answered the question: What is “hemp”; and addressed some of the consequences of defining “hemp” as a thing. In Part 2, I will explore this topic in more detail and provide some commonsense definitions for several traditional hemp products based on a classification approach rather than separating “cannabis” from “hemp”.

Classifications, Specifications, and Test Methods – Establishing Market Protections for Hemp Products Through Standardization

Does making a distinction between “hemp” and “cannabis” make it easier to protect the interests of the seed and fiber markets?

On the face of it, this question seems obvious. Yes, it does.

Up to this point in history, the bifurcation of the cannabis plant into resin types and non-resin types has served to provide protections for the seed and fiber markets by making it easier for producers to operate, since the resins (the scary cannabinoids, namely d9-THC) were not involved. Today, however, the line in the sand, has been washed away, and “hemp” no longer only refers to non-resin producing varieties of the cannabis plant.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

As more and more hemp marketplaces come online with varying limits for d9-THC the need for standardization becomes even more pressing. Without standardization, each marketplace will have its own requirements, forcing businesses looking to sell their products in multiple jurisdictions to comply with each region’s mandates and adds a significant level of burden to their operations.

Providing an internationally harmonized definition for hemp is an important first step but allowing the d9-THC limit to vary from jurisdiction to jurisdiction has some unintended (or intended) consequences (#NewReeferMadness). These discrepancies between legal marketplaces will inevitably lead to the establishment of global trade regions; where, if your product cannot meet the definition of “hemp” in that region, then you could effectively be barred from participating in it.

A process which has already started. Harmonizing around 0.3% is great for the US, Canada, and European Union, but what about other stakeholders outside of these markets?

And, at what point does the conflict of hemp from one region with a d9-THC content of 0.3% and hemp from another region with a d9-THC content of 1% being sold into the same market become a problem?

Perhaps a better long-term solution for protecting the market interests of “hemp product” stakeholders would be to establish specifications, such as identity metrics, total cannabinoid content, especially d9-THC, and other quality attributes which have to be verified using test methods for a product to be classified as “hemp”. This system of standards (classifications, specifications, and test methods) would allow for more innovation and make it significantly easier for cannabis raw materials that meet these specifications to find a use rather than being sent to the landfill. Bolstering advancements and opening the door for more market acceptance of the cannabis plant, its parts, and products.

An Alternative Approach to Defining Hemp

Below are some proposed definitions related to common terminology used in the hemp marketplace based on the concept that there are no hemp plants, there are only cannabis plants that can be classified as hemp, and hemp products are simply cannabis products that meet certain specifications to allow them to be classified and represented as hemp.

  • Hemp, n—commercial name given to a cannabis plant, its parts, and products derived therefrom with a total d9-THC content no more than the maximum allowable limit for the item in question. (Maybe not the best definition, but it makes it clear that not only does the limit for d9-THC vary from jurisdiction to jurisdiction it varies from product type to product type as well.)
  • Hemp flower, n—commercial name for the inflorescence of a cannabis plant that can be classified as hemp.
  • Hemp seed, n—commercial name for the seeds of a cannabis plant which are intended to be used to grow another cannabis plant that can be classified as hemp.
  • Hempseed, n—commercial name for the seeds of a cannabis plant which are intended to be used as food or as an ingredient in food.
  • Hemp seed oil, n—commercial name for the oils expressed from the seeds of a cannabis plant.
  • Hemp seed cake, n—commercial name for the solid material byproduct generated during the expression of the oil from the seeds of a cannabis plant.
  • Hemp flour/meal/dietary-fiber, n—commercial name for the powdered seed cake of a cannabis plant intended to be used as a food or as an ingredient in food with a protein content no more than 35% by weight.
  • Hemp protein powder, n—commercial name for the powdered seed cake of a cannabis plant intended to be used as a food or as an ingredient in food with a protein content between 35% and 80% by weight.
  • Hemp protein isolate, n—commercial name for the powdered seed cake of a cannabis plant intended to be used as a food or as an ingredient in food with a protein content above 80% by weight.
  • Hemp fiber, n—commercial name for the cellulosic-based natural fibers of a cannabis plant.
  • Hemp shives, n—commercial name for the hurd of a cannabis plant which have been processed to defined specifications.
  • Hempcrete, n—commercial name for a solid amalgamation of various aggregates and binders, typically comprised of the hurd (shives) of a cannabis plant and lime.

The d9-THC limits for each product were purposefully omitted because these specifications still need to be defined for each product type. Leaving the d9-THC limit up to each authority having jurisdiction, however, is not the answer. It is fine if you comply with a lower d9-THC limit and want to sell into a market with a higher d9-THC limit, but what do you do if you are above the limit for the market you want to sell into? For now, you lose out on potential revenue.

Hemp-derived CBD extract

I am not advocating that everyone starts selling “hemp” as “cannabis,” or vice versa, far from it. I am advocating for a more commonsense and inclusive approach to the marketplace though. One that would allow for the commercialization of materials that would normally be going to waste.

To me it is simply logical. There are no hemp plants, there are only cannabis plants that can be classified as hemp. There are no hemp products, there are only cannabis products that can be classified as hemp. In order for a cannabis product to be marketed, labeled, and sold as a hemp product, i.e. to be classified as a hemp, it would need to meet a set of specifications and be verified using a set of test methods first. But fundamentally the product would be a cannabis product being certified as “hemp”. And that is the shift in thinking that I am trying to get across.

Exclusionary Actions – Disenfranchising Stakeholders

The cannabis plant is an amazing plant and to fully capitalize on the potential of this crop we have to start allowing for the commercialization of cannabis raw materials that are not controlled by the UN Single Conventions, i.e. the seeds, stalks, roots, and leaves when not accompanied by the fruiting tops or the resin glands. Not to do so disenfranchises a significant number of stakeholders from participating in established legal avenues of trade for these goods. A concept proposed and endorsed the ASTM D37 in the published standard D8245-19: Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream Products.

If you are stakeholder in the hemp marketplace, you may feel threatened by the idea of the market getting flooded with material, but how are the demands of the so called “green economy” going to be met without access to more supply? Organic hemp seed for food production is scarce but there is plenty of conventional hemp seed for the current demand, but what happens when hempmilk is positioned to displace soymilk in every major grocery store? To feed the growth of the human population and allow for a transition to a truly “green economy,” we need to ensure that the policies that we are putting in place are not excluding those looking to participate in the industry and disenfranchising stakeholders from burgeoning marketplaces, nor alienating a segment of the marketplace simply because their plant cannot be classified as “hemp”.

Until next time…

Live long and process.

Defining Hemp: Classifications, Policies & Markets, Part 1

By Darwin Millard
2 Comments

What is “hemp”?

The word “hemp” has many meanings. Historically the term has been used as the common name for the Cannabis sativa L. plant. Just like other plants, the cannabis plant has two names, a common name, hemp, and a scientific name, Cannabis sativa L. After the ratification of the UN Single Conventions on Narcotic Drugs and Psychotropic Substances, in 1961 and 1972 respectively, the term started to be used to distinguish between resin producing varieties of the cannabis plant and non-resin producing varieties of the cannabis plant. Nowadays the term is generally used to refer to cannabis plants with a delta-9-tetrahydrocannabinol (d9-THC), a controlled substance, content equal to or less than the maximum allowable limit defined by each marketplace.

Tetrahydrocannabinol (THC), just one of hundreds of cannabinoids found in cannabis.

In the United States and Canada, the limit is defined as 0.3% on a dry weight bases, and until November 2020, in the European Union, the limit was defined as 0.2%. After years of effort the “hemp” industry in Europe was successfully able to get the limit raised to 0.3% to be in line with the United States and Canada – creating the largest global trade region for hemp products. But there exist several marketplaces around the world where, either through the consequences of geographic location or more progressive regulations, the d9-THC content in the plant can be substantially higher than 0.3% and still considered “hemp” by the local authority.

To address these variances, ASTM International’s Technical Committee D37 on Cannabis has been working on a harmonized definition of hemp, or industrial hemp, depending on the authority having jurisdiction, through the efforts of its Subcommittee D37.07 on Industrial Hemp. The following is a proposed working definition:

hemp, n—a Cannabis sativa L. plant, or any part of that plant, in which the concentration of total delta-9 THC in the fruiting tops is equal to or less than the regulated maximum level as established by an authority having jurisdiction.

Discussion: The term “Industrial Hemp” is synonymous with “Hemp”.

Note: Total delta-9 THC is calculated as Δ⁹-tetrahydrocannabinol (delta-9 THC) + (0.877 x Δ⁹-tetrahydrocannabinolic acid).

This definition goes a long way to harmonize the various definitions of hemp from around the world, but it also defines “hemp” as a thing rather than as a classification for a type of cannabis plant or cannabis product. This is a concept rooted in the regulatory consequences of the UN Single Conventions, and one I strongly disagree with.

The definition also leaves the total d9-THC limit open-ended rather than establishing a specified limit. An issue I will address further in this series.

Can “hemp products” only come from “hemp plants”?

If you are an invested stakeholder in the traditional “hemp” marketplace, you would say, yes.

But are there such things as “hemp plants” or are there only cannabis plants that can be classified as “hemp”? (The definition for hemp clearly states that it is a cannabis plant…)

A field of hemp plants, (Cannabis sativa L.)

There is no distinction between the cannabinoids, seeds, and fibers derived from a cannabis plant that can be classified as “hemp” and those derived from a cannabis plant that cannot. The only difference is the word: “cannabis,” and the slew of negative connotations that come along with it. (Negative connotations that continue to be propagated subconsciously, or consciously, whenever someone says the “hemp plant” has 50,000+ uses, and counting, and will save the world because it’s so green and awesome, but not the “cannabis plant”, no that’s evil and bad, stay away! #NewReeferMadness)

The declaration that “hemp products” only come from “hemp plants” has some major implications. “Hemp seeds” can only come from “hemp plants”. “Hemp seed oils” can only come from “hemp seeds”. “Hemp fibers” can only come from “hemp plants”. Etc.

What does that really mean? What are the real-world impacts of this line of thinking?

Flat out it means that if you are growing a cannabis plant with a d9-THC content above the limit for that plant or its parts to be classified as “hemp”, then the entire crop is subjected to the same rules as d9-THC itself and considered a controlled substance. This means that literal tons of usable material with no resin content whatsoever are destroyed annually rather than being utilized in a commercial application simply because a part or parts of the plant they came from did not meet the d9-THC limit.

Some of the many products on the market today derived from hemp

It is well known that d9-THC content is concentrated in the glandular trichomes (resin glands) which are themselves concentrated to the fruiting tops of the plant. Once the leaves, seeds, stalks, stems, roots, etc. have been separated from the fruiting tops and/or the resin glands, then as long as these materials meet the authority having jurisdiction’s specifications for “hemp” there should be no reason why these materials could not be marketed and sold as “hemp”.

There are several reasons why a classification approach to “hemp plants” and “hemp products” makes more long-term sense than a bifurcation of the “cannabis” and “hemp” marketplaces, namely from a sustainability aspect, but also to aid in eliminating the frankly unwarranted stigma associated with the cannabis plant. #NewReeferMadness

That said, say you are a producer making shives from the stalks of cannabis plants that can be classified as “hemp” and then all of a sudden, the market opens up and tons of material from cannabis plants that cannot be classified as “hemp,” that was being sent to the landfill, become available for making shives. Would you be happy about this development? Or would you fight tooth and nail to prevent it from happening?

In this segment, we looked at the history of the term “hemp” and some of the consequences from drawing a line in the sand between “cannabis” and “hemp”. I dive deeper into this topic and provide some commonsense definitions for several traditional hemp products in Part 2 of Defining Hemp: Classifications, Policies & Markets.

Charlotte’s Web Poised for Canadian Expansion

By Cannabis Industry Journal Staff
No Comments

Charlotte’s Web Holdings, the company that just about launched the entire CBD industry, announced this week that they have just been approved for registration on Health Canada’s list of approved cultivars (LOAC) for 2021. Three of their proprietary hemp cultivars have made the cut, gaining the company access to the Canadian market.

Jared Stanley, co-founder and chief cultivation officer at Charlotte’s Web, says they plan to lead the market in Canadian hemp-derived CBD products. “The majority of approved cultivars on the LOAC to date have been for industrial hemp grown to produce food, fiber, and animal feed,” says Stanley. “Now our approved cultivars are paving the way for full-spectrum hemp CBD demand in Canada and most importantly, will provide access to Charlotte’s Web products in Canada.”

Largely due to the difference in regulatory approaches between Canada and the U.S., the CBD product market in Canada is somewhat small. Health Canada currently regulates CBD products the same as products containing more than 0.3% THC. In the U.S., a checkerboard of state laws, the 2018 Farm Bill and the subsequent state hemp programs led to massive growth for the CBD product marketplace.

Charlotte’s Web is one of the leading hemp-derived CBD companies operating in the United States. With the soon-to-be expansion into Canada, the company hopes to develop a global footprint, says Deanie Elsner, president and CEO of Charlotte’s Web. “Today, Charlotte’s Web is the leading hemp wellness company in the U.S. with the most recognized and trusted hemp CBD extract,” says Elsner. “We aspire to be the world’s leading botanicals wellness company, entering countries with an asset light model where federal laws permit hemp extracts for health and wellness. Israel and Canada are included in the first steps of our international expansion.”

Leaders in Cannabis Formulations: Part 2

By Aaron Green
2 Comments

Editor’s Note: In Part 1 of this series, green sat down with Drew Hathaway, senior food scientist at Stillwater Brands. Click here to see Part 1.

Natural cannabinoid distillates and isolates are hydrophobic oils and solids, meaning that they do not mix well with water and are poorly absorbed in the human body after consumption. By formulating these ingredients using a patented delivery system technology, trademarked VESIsorb®, Geocann has overcome common obstacles associated with fat-soluble active ingredients, including poor stability, bioavailability, absorption, and solubility. In addition, Geocann has peer-reviewed, published evidence of the dramatic improvements in Cmax, AUC, and Tmax (“time to peak absorption” directly related to “fast-acting” benefits).

Geocann is a cannabis formulation company with its headquarters in Fort Collins, Colorado, and additional offices in Chicago, Illinois and Zurich, Switzerland. The company is led by an impressive leadership team of scientists, pharmacists, researchers and natural product industry leaders. Geocann’s technology platform has been successfully applied to a wide range of cannabis product applications, including soft gel and hard-shell capsules, functional foods (e.g. gummies) and beverages, powder systems, tinctures, sublingual sprays and topically applied formulations. Brand partners in the U.S. utilizing Geocann’s technology for hemp applications include Nestlé Health Science, Cannaray and Onnit, and brand partners for medical and adult-use cannabis applications include Curaleaf, Sunderstorm and CannaCraft, among others.

We spoke with Jesse Lopez, CEO and Founder of Geocann, about their product formulation technology in cannabis and how they work with brand partners in the U.S and internationally. Lopez started Geocann in 2018 alongside the success he’s experienced at SourceOne Global Partners (founded in 2003 by Lopez), a leading formulation company in the nutraceuticals space with a reputation for pioneering innovative products that combine science-backed ingredients with patented drug delivery system technologies to address the most pressing consumer health concerns, such as heart health, cognitive function, inflammatory response, metabolic syndrome and type II diabetes, among others.

Aaron Green: Jesse, first off, how did you get involved in the cannabis industry?

Jesse Lopez: Our focus at SourceOne Global Partners has been on natural products for nearly two decades. Some of the folks involved with our natural products business decided that they would get involved in the cannabis business and they asked for my support at the Advisory Board level. I agreed to serve and figured I better learn about the cannabis industry! We realized that there was a tremendous opportunity for utilizing our drug delivery system technology to enhance the value of these cannabis-based products. Due to the regulatory environment, strategic legal counsel and new investments necessary to take an immediate leadership position in the cannabis industry we launched Geocann in 2018 with an office in a fully legal state at the time, Colorado.

Green: How do you select the natural products you work with at SourceOne?

Jesse Lopez, CEO and Founder of Geocann

Lopez: We really focus on science-backed natural product ingredients that may require high doses to reach therapeutic blood levels. By combining these science-backed ingredients with patented technologies – which we own the global rights to – these products offer desirable differentiation for leading brands, such as dramatically improved absorption and bioavailability, patent protection and trademarked “intel inside” branding.

Green: What are some of the other natural products you have experience with?

Lopez: We work with a range of some of the most popular nutraceuticals such as coenzyme Q10 and omega-3 fish oil to the more innovative natural products like resveratrol. We also work with vitamin D, and other immunity-based ingredients that can be enhanced using our delivery system technology to deliver greater benefits to the people that are taking those products.

Green: What is the technology and how does it work?

Lopez: I think it’s important to recognize our technology partner, Vesifact, in Zurich, Switzerland, who is the inventor of the VESIsorb® technology platform and serves as the scientific research, technical support, production, and product development arm of SourceOne and Geocann. We are very proud of this symbiotic relationship where our role at Geocann and SourceOne is to provide the commercial development, sales, marketing and strategic distribution infrastructure. We promote our partnership openly on our website and in our marketing materials because of their unrivaled leadership position in the global marketplace.

They have consistently been recognized as a top 10 global organization for health-related nanotechnology patent activity, ahead of many of the most well-known pharmaceutical companies in the world. It is an intellectual property portfolio that has been used to provide solutions to the most difficult product formulation challenges over the years in pharmaceuticals, medical devices, nutraceuticals, cosmetics, and now cannabis applications. Together, our focus has been on delivering novel solutions in these diverse fields of use and product applications based upon VESIsorb® formulation technology.

Each active compound identified with its own set of formulation, absorption and bioavailability challenges requires a customized solution that allows the full potential health benefits to be realized from success in the lab to commercial scale up. This is the process and we have successfully delivered unmatched solutions for close to twenty years from coenzyme Q10 to now both psychoactive and non-psychoactive cannabinoid product formulations in a wide range of product applications.

We saw the exploding interest in CBD with our nutraceutical partners and demanding consumers worldwide but chose to start Geocann to keep the markets served separate. We were confident that the VESIsorb® technology would provide much needed solutions for CBD as a wellness product, but also adult-use and medical cannabis products regarding “fast acting” and “product stability” needs.

Green: What’s the problem in cannabinoid bioavailability that Geocann’s technology helps to solve?

Lopez: It is well-recognized in the scientific literature that CBD, THC and other cannabinoids, in general, show limited bioavailability due to their lipophilicity, poor aqueous solubility and extensive first-pass metabolism.

Our VESIsorb® technology was designed to address the poor bioavailability of drugs and natural bioactives like cannabinoids exhibiting poor water solubility but high membrane permeability (Biopharmaceutical Classification System: Class II compounds). The VESIsorb® technology is a lipid-based formulation that self-assembles on contact with an aqueous phase into a colloidal delivery system. This colloidal solubilization improves the transport of the cannabinoids through the aqueous phase of the GI-lumen to the absorptive epithelium, dramatically improving bioavailability.

VESIsorb® is typically characterized as a SEDDS (self-emulsifying drug delivery system). What’s unique about our VESIsorb® SEDDS is the long history of safe and effective use worldwide and the large number of products that, over the years, we’ve successfully developed. With decades of experience delivering novel formulation solutions, there is significant and valuable “know how” that we bring to each formulation challenge.  This “know how” allows us, for example, to develop cannabinoid formulations that provide lymphatic absorption pathway advantages in addition to standard gastrointestinal absorption, therefore optimizing therapeutic blood levels for maximum benefits.

Needless to say, there are various methods that attempt to address the poor cannabinoid bioavailability. Unfortunately, too often, companies make claims that they have water soluble cannabinoids but offer little evidence to validate their claims. The popular misconception is that some degree of water solubility will consistently translate to improved bioavailability. This is clearly not accurate. We know scientifically that pharmacokinetic performance is highly variable. A review paper I read recently comparing water soluble delivery system formulation types illustrated this fact. There was greater than an eight-fold difference in bioavailability amongst the various water-soluble formulations.

Green: Can you tell me some details about your global license with Vesifact?

Lopez: Our technology exclusivity is based upon given categories. So, when we say we have global exclusivity for nutraceuticals, that can be as I’ve already mentioned, omega-3, coenzyme Q10, or resveratrol as examples, and this business is managed by SourceOne. With regards to our global exclusivity for cannabinoids and terpenes– whether we formulate these ingredients to create a functional drink, or we’re creating a gummy, or creating a softgel capsule or powder-filled hard-shell capsule, or sublingual, or topical – all of those product applications are covered by ourexclusivity for the technology and is managed by Geocann.

The beauty of our technology is that we’ve already achieved success with all of those product applications. That’s one of the big advantages of our technology versus some other approaches trying to address the challenges of cannabinoid bioavailability.

Green: What kind of validation and clinical studies have you done so far in the cannabinoid space?

Lopez: We were the first to have stability data with creating our formulation in a soft gel capsule with CBD. We recently submitted to the European market for novel food application. We invested hundreds of thousands of dollars in proprietary safety studies that are required to achieve novel food status in Europe and FDA GRAS in the U.S. We have proprietary stability data as well as proprietary toxicology data from multiple, self-funded clinical studies. Many companies that submit for the EU novel food application are only referencing the existing scientific literature about the pharmacokinetics of cannabinoids, whereas we have our own peer-reviewed, published study. In our study, we compared our VESIsorb®-CBD formulation to the industry standard MCT Oil-CBD formulation in a crossover design where we were able to demonstrate how we could dramatically improve the bioavailability of CBD.

Green: Can you talk about the benefits of your technology with regards to bioavailability and onset time?

Lopez: When you start talking about onset time we move into a broader discussion relative to cannabinoids. We’ve been very successful with marijuana, especially as it relates to THC, because of the dramatic improvement in time to Tmax, and how much faster we reach Tmax than a standard THC formula. Our formulation is generally four times faster compared to standard formulations.

When it comes to area under the curve and Cmax, we show improvements of four to six times a standard THC or CBD product. Further, when we start looking at the differences between other studies that have been published, we show an even greater improvement based upon study comparisons to what other people have done, even compared to products like GW Pharmaceuticals’ Sativex Oromucosal Spray.

Green: Can you address the SEDDS formulation and liver metabolism?

Lopez: We’ve dramatically overcome challenges with the first-pass effect. We have also formulated our products to address lymphatic absorption. So, we’re coming at it from a number of different angles.

We disagree with people who talk about water solubility as an end-all be-all solution. When you look at the range of published studies, whether it’s nanoparticles or liposomal systems or micro-emulsions, they all are water soluble systems, but yet the data shows there’s dramatic differences in the real efficacy of those approaches, and what the actual improvement in blood levels are. Ultimately, those blood levels represent the efficacious nature of the products whether we’re talking about CBD, or talking about THC.

Green: As a Colorado-based company you work with cannabis partners across the US. Can you tell me about your relationship with marijuana product formulators and brands and how you structure your licensing agreements across state boundaries?

Lopez: In a recent article about the leading fast acting gummies, the two companies they focused on were Sunderstorm with the Kanha Nano gummies and Curaleaf with their Select Fast Acting Nano gummies. Both of those companies use our VESIsorb® technology. We’re very proud of our relationship and the success they’re having as leaders in most dominant states with that particular product application.

Onset time has always been a challenge with gummies. And we’ve dramatically improved onset. Actually, we’ve shown statistically significant improvements for all measured pharmacokinetic parameters in a recent peer-reviewed published study.  We demonstrated much higher total absorption in maximum plasma concentration (Cmax), total exposure [area under the curve (AUC)]) and the time to reach the peak concentration (Tmax).

We say powered by VESIsorb® technology the product is faster, stronger, longer.

Green: How does the experience differ from a standard oil- or isolate-based formulation?

Lopez: The only way that I can answer that question is we’ve had 100% success with the companies we work with in their initial trials. When someone tells me that a group of employees are going to try the product and they’re heavy users of cannabis and they are smokers, I think, “wow, you know, gummies have to be really successfully formulated for someone like that to be pleased with the high.” Then they come back and say, “that’s the best that I’ve had in four years!” and they’re totally blown away. That’s completely different than a peer reviewed published study, but for sure, that’s the kind of feedback and anecdotal evidence that we get. I think that’s why that application is growing so much faster now because we’ve overcome this onset issue.

Green: Do you give exclusive rights on a state-by-state basis?

Lopez: We’re very selective about who we work with. Exclusivity is always part of the discussion. But at the same time, it’s really more about protecting the investment in the people that we partner with and not cannibalizing a given market. So, there are some exclusive relationships in the U.S. and internationally, like Heritage Cannabis and Pathway Health Corp in Canada, but for the most part, I would say simply, we were very selective about who we do business with and open to new partnerships.

Green: What kind of support do you provide to your licensing partners?

Lopez: We provide 100% formulation and technical support. We provide the SEDDS and then they use their own legal, licensed cannabis and their own equipment. Our system requires no special equipment or investment in changes to their process. So, not only do we provide formulation expertise, but our system is really easy to use both in a lab environment as well as producing large scale commercial productions.

Green: What geographies are you in currently with the cannabinoid formulations?

Lopez: We are global in scope. We’ve been very fortunate to have success not only in the US and Canada, but Europe, Brazil and Australia as well. Our level of participation will vary whether we’re talking about medical marijuana, adult-use or hemp extract and CBD.

Green: If somebody is interested in learning more about your product or potentially becoming a license partner, how would they how would they reach out to you to set that up?

Lopez: If they went to our website, www.geocann.com, it’s pretty easy to reach us and I am grateful that so many companies are doing that.

Green: Great, thanks Jesse that concludes the interview!

Flower-Side Chats Part 3: A Q&A with Harvey Craig, CEO Harvey’s All Naturals and Co-Founder of Boot Ranch Farms

By Aaron Green
No Comments

In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses integrate innovative practices in order to navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

Large-scale agricultural practices can take a toll on soil health leading to inefficiencies over the long term. Harvey’s All Naturals is a Colorado-based company specializing in premium farm-to-table full spectrum CBD products. Harvey’s gets all of its hemp from Boot Ranch Farms, an off-grid sustainable hemp farm in Southern Colorado supplied by an artesian well.

We spoke with Harvey Craig, CEO Harvey’s All Naturals and co-founder of Boot Ranch Farms, to learn more about the benefits of regenerative agriculture, how he thinks about soil health, and how they produce their CBD products. Harvey started Boot Ranch Farms in 2014 after the passing of the Farm Bill and Harvey’s All Naturals followed shortly thereafter.

Aaron Green: How did you get involved in the cannabis and hemp industry?

Harvey Craig: I got involved at a very young age, as the youngest of eight kids, seven of which are boys, I was introduced to cannabis on the marijuana side first. As an engineer through the years, I’ve always been involved in creating very efficient growing systems for cannabis.

Harvey Craig, CEO Harvey’s All Naturals and co-founder of Boot Ranch Farms

In the early 2000s, I learned about CBD a little bit through experimenting with marijuana strains to help a friend who had Parkinson’s and also through the research performed by Raphael Mechoulem, an organic chemist and professor at the Hebrew University of Jerusalem in Israel. In 2014, when the Farm Bill made hemp legal, I dropped everything and went into it because I felt “this is what I need to be doing.”

Green: What is sustainable farming mean to you?

Craig: Sustainable farming to me means putting soil health and responsible natural growing practices at the forefront of all agriculture – regenerative processes for soil, in a nutshell. To me, soil health is one of the biggest problems in the United States right now. By regenerating and making our soils living, healthy and with a rich nutrient base we create an ecosystem that is good for human health and health all around.

Green: What do you mean specifically when you say, “soil health?”

Craig: Soil is living. A good natural soil has a living microbiotic structure inside it. There’s a living habitat that forms inside our soil over the years. Large scale agriculture in many cases has depleted or killed this living structure through readily accessible fertilizers and tilling practices.

Farmers understand the soil. There are practices we can undertake that are helping our living soils and helping the microbiotic habitat to thrive. Practices such as no-till technologies, rotating crops, using cover crops, not being a monocrop, responsible water use, healthy fertilizer and pesticide technologies, minimal processing, the list goes on and on…

When we talk about this thing called sustainability, I think it’s very important that we understand there are two sides of cannabis. There’s the marijuana and then there’s the hemp. We can’t put those two together – they’re governed very differently. Hemp became legal through the Farm Bill and is governed by the Department of Agriculture. Hemp is just like any other crop out there really. That means we can mix hemp in with other crops. It’s very much like corn and other crops in how it’s grown on a large scale, industrial basis.

Marijuana on the other hand is governed by each state’s regulatory commission. Those regulations make it very hard to mix in with general agriculture. So, when it comes to the marijuana side, unfortunately, it must be a monocrop. Most marijuana is grown in pots and pots are fine. However, if you are just growing in a pot and then throwing your soil away, that is not very sustainable. As it sits right now, in the marijuana industry there is really no sustainability, unfortunately. The energy use for the lights in indoor grows, for example, creates a huge carbon footprint and load on the electrical grid. I’m not trying to put indoor growing down, but that’s the way it is. The only way I foresee sustainability in the marijuana side of cannabis is to let loose a little bit on regulation and allow it to become a part of normal agricultural processes.

Green: What is it about tilling that degrades the soil quality?

Craig: When we till our soil, we’re turning the organisms in the soil up and we’re allowing the sun to dry them out. If it’s not done properly, you kill that soil structure.

Now, these little microorganisms in our soil create a healthy soil, but it doesn’t happen instantly, this takes years to create. Nobody has the time anymore, everybody’s “go go go” and “make it happen instantly”. So that gets destroyed. Now we have all these dead soils that everybody’s growing in and growers turn to factory-produced fertilizers with readily available nutrients.

When we are talking about cannabis, we can’t just look at monocropping. If you grow one crop in the same soil over and over, the soil is going to get depleted. One of the main things that we deplete is nitrogen and growing other crops, such as clover, can replenish that nitrogen. Growing cover crops protects the soil from the sun, creates nitrogen for the soil, and holds the water within the soil.

Instead of tilling, you can rotate with crops like root vegetables, radishes and other things that have deep root structures. Instead of tearing them up, just let them degrade organically and go back into the soil. Those deep root structures will also help aerate the soil.

Green: What is a farmer’s first approach?

Craig: Farmers want their land to be healthy. True farmers have a oneness with the earth and understand the earth. The farmer’s first approach keeps the farmer involved in creating new technologies for agriculture.

Green: Let’s say you’re a farmer that has land or recently acquired land that’s been industrially grown upon. How would you take that land and start fresh with a regenerative process?

Craig: The first thing you have to do is take soil samples and send them to a lab. That’ll tell you what you’re working with. Also, knowing a little history about the land helps as well. Was it used for grazing? Was it used for growing corn? What was it used for? Were organic practices used?

Then, there are many things you can do to start to regenerate your soil, but it takes time. In many situations, people don’t want to take that time. But what we’re learning is, the people and the farmers that do take that time often take a hit monetarily for the first two or three years. After that, once that structure is maintained, the natural health of the soil can be replenished. Crops will grow better, and they won’t spend as much money on fertilizers and pesticides in the long run because the microbiotic structure in the soil is creating a healthy ecosystem. When we destroy that ecosystem, it doesn’t come back easily or quickly. If there’s a little bit there, it can be regenerated with the right practices.

Green: I understand that the Boot Ranch is an off-the-grid farm. What was your motivation for either going off-grid or remaining off-grid?

Craig: I have a background in alternative energies and engineering, and when creating Boot Ranch Farms there was a lot that went into the sustainability side of it. The farm is extremely far away from the power grid for starters. So, an investment in solar for electricity was money well spent. My thought process was, why would I invest in bringing the wires in when I could actually save money and resources by creating a very efficient solar system and not be tied to the grid? Our farm is self-sustaining without being connected to any grid, which is one of the main reasons for remaining off-grid.

Green: I understand the farm is supplied by an artesian well. How do you monitor your water quality?

Craig: Well, we’re very fortunate. Existing natural water quality is one of the main reasons we decided to grow in the San Luis Valley. When you’re starting something new, you have to look at your financial side of things. Investing in a hemp farm is very different than the marijuana side because you won’t make as much money per pound of product sold. So, you have to watch your budget and not spend too much, or you’re never going to make a profit.

The self-sustaining artisanal well and water rights were existing on the property. There’s no pumping required for it and the water goes into a 10,000-gallon holding tank, where we can monitor and test for water quality. In order to water our plants, we use a pump/drip water system that supplies water to each individual plant. It’s very efficient compared to most watering systems out there, such as flood irrigation or pivots, and really doesn’t use a heck of a lot of water.

Green: Are you growing in open air or greenhouses?

Craig: We grow in two 3,000 square feet industrial-grade greenhouses at Boot Ranch Farms. Greenhouse One has all the bells and whistles including heating, cooling, light deprivation, supplemental lighting, automated controls and more. That greenhouse allows us to mimic Mother Nature a little bit. We can get up to six harvests throughout the course of the year in that greenhouse. However, in reality, we get about four.

In addition, we have a second greenhouse that is set about 100 feet away and set up to keep plants growing on mother nature’s cycle. We can move groups of mature plants to Greenhouse One after each harvest for multiple flowering cycles. Lastly, between greenhouses, we have a 10,000 square foot courtyard that’s protected with shade cloth and other things to help protect those plants from the elements. In late October, all remaining plants in both greenhouses and the courtyard become mature and ready to harvest due to shorter days created by mother nature.

Green: Do you insure your crops?

Craig: We have not. Hemp is a new industry and we have not found good crop insurance.

Green: Do you cultivate your own genetics?

Craig: We work with some other companies here in Colorado to provide genetics. Consistent genetics are extremely important on the hemp side because we need to trust that they are going to keep the THC levels down. On the marijuana side, that part doesn’t matter so much

There are different strains that have been created that I absolutely love, and I’ve tried to stick with them and stay with that seed stock. One of them is called The Wife and the other Cherry Wine. Most of the best hemp I have found is based upon the Cherry strain. People are always looking for high CBD. I’d rather have a lower CBD level in the 8% to 12% range. Something higher in the 14% to 20% range has a higher chance of producing a product with more than the legal amount of THC.

Green: Is Harvey’s All Naturals fully supplied by Boot Ranch Farms?

Craig: Yes, it is. There are a lot of things that go into a quality product and we focus on that at Boot Ranch. We’re small, not trying to compete with the large-scale market. Unfortunately, a high percentage of the products out on the market come from large-scale industrial hemp grows. We focus on long-term medicinal value and grow very high-quality hemp and we try not to degrade it in any way, shape or form throughout processing.

Green: How many square feet or acres is the Boot Ranch Farm?

Craig: Boot Ranch farm is about 260 acres. We only grow on less than three of it.

Green: What’s your extraction process?

Craig: We use cold alcohol extraction. We do not distill to separate our alcohol from the hemp oil. We use what’s called a roto vape. That cold processing preserves our terpenes, it preserves our full-spectrum cannabis oil profile and doesn’t fully decarboxylate our CBDa. We want a large CBDa percentage because there are many things that CBDa is good for when it comes to long term medicinal reasons.

Green: Are you processing your own hemp?

Craig: No, we sub that part of it out. What I’ve learned in this industry is three main parts: 1- the farming; 2- the extraction, and; 3- the product line. Those are three very separate processes and require specialized expertise within themselves. Each is a large investment and it’s very hard to do it all. I decided to work with other people on the extraction part of it. They have the expertise, and we pay them well to do what they do.

Green: Okay, great. And then any final words for Ag Day?

Craig: Support your small farmer in nutrient-rich agricultural products.

Green: Great. That concludes the interview, Harvey!

Craig: Thank you very much!

Mark Your Calendars: The Cannabis Cultivation Virtual Conference Returns

By Cannabis Industry Journal Staff
No Comments

On March 23, 2021, Cannabis Industry Journal is hosting our annual Cannabis Cultivation Virtual Conference. From Noon to 5 pm EST, you’ll get access to nine veterans of the cultivation market discussing a variety of topics related to the ins and outs of growing cannabis and hemp.

Hear from subject matter experts who will share their perspectives on growing organically, facility design and planning, hemp farming and integrated pest management.

Back in December during the Cannabis Quality Virtual Conference, the Cultivation Technology episode featured a session titled A Panel Discussion: Integrated Lifecycle of Designing a Cultivation Operation. Due to a large amount of interest and attendee questions that the panel did not have time to address, we are reprising this panel discussion and bringing it back on March 23.

Speakers for that panel discussion include: Gretchen Schimelpfenig, PE, Technical Director of Resource Innovation; Brandy Keen, Co-Founder & Sr. Technical Advisor at Surna, Inc; Adam Chalasinski, Applications Engineer at Rough Brothers/Nexus Greenhouse Systems/Tetra; David Vaillencourt, Founder & CEO of The GMP Collective, and Kyle Lisabeth, Vice President of Horticulture at Silver Bullet Water.

Other talks from the Cannabis Cultivation Virtual Conference on March 23 include:

  • Why CBD Companies Should Go Organic
    • Brad Kelley, COO of Socati
  • The Beginner’s Guide to Integrated Pest Management
    • David Perkins, Founder of Floresco Consulting
  • Starting from Scratch: Launching a Hemp Farm in Georgia
    • Reginald “Reggie” Reese, Founder & CEO of The Green Toad Hemp Farm
    • Dwayne Hirsch, President & Chief of Business Development at The Green Toad Hemp Farm

You can check out the agenda in its entirety and register here. Attendees will have the opportunity to ask speakers questions during the live Q&A session that follows each session. Registration is complimentary. For sponsorship opportunities, contact RJ Palermo at Rj@innovativepublishing.net

Navigating Compliance: Practical Application of Fit-For-Purpose

By Darwin Millard
No Comments

What is “fit-for-purpose?” Fit-for-purpose is an established best practice used in several major industries, like information technology, pharmaceuticals, agriculture and inventory management. It is a concept that aligns infrastructure and systems specifications with desired outputs – be that product, service or bottom line. When applied to a cannabis plant, its parts, products and associated processes, it can streamline regulatory framework development, implementation and compliance.

Fit-for-purpose is simply a series of logic questions you ask yourself to determine what business practices you should implement and the regulatory framework in which you must comply. What are you making? Who is it for? Where will it be sold? All this impacts how you would cultivate, process, handle and store a cannabis plant, its parts and products regardless of the type of cannabis plant. The fit-for-purpose concept is a tool that can be applied to any scenario within the cannabis/hemp marketplace. Take for instance, sustainability: a practical example would be to design cultivation standards that are “fit-for-purpose” to the climatic region in which the plants are grown – allowing any type of cannabis plant grown anywhere in the world to meet specifications regardless of the method of production.

There is no “special sauce” here. All fit-for-purpose does is get you to ask yourself: “Are the protocols I am considering implementing ‘fit/appropriate’ to my situation, and if not, which protocols are more ‘fit/appropriate’ based on the products I am making, the target consumer and marketplace in which the products are to be sold?”“Fit-for-purpose is a powerful concept that can be used for simplifying regulatory framework development, implementation and compliance”

A non-cannabis/hemp example of fit-for-purpose could be a scenario where a banana producer wants to implement a data management system into their cultivation practices to better track production and yields. There are many data management systems this banana producer could implement. They could implement a data management system like that of big pharma with multiple levels of redundancy and access control related to intellectual property and other sensitive data. They could also implement a data management system used for tracking warehouse inventory; it cannot exactly capture everything they need but it is better than nothing. Neither example is really “fit/appropriate” to the banana producer’s needs. They need something in between, something that allows them to track the type of products they produce and the data they want to see in a way that is right for them. This idea is at the core of the fit-for-purpose concept.

Applying Fit-for-Purpose

So how do we apply fit-for-purpose to the cannabis/hemp marketplace? Fit-for-purpose reduces the conversation down to two questions: What products are you planning to make and how do those products affect your business practices, whether that be cultivation, processing, manufacturing or compliance. The point being the products you plan to produce determine the regulations you need to follow and the standards you need to implement.

Growers can use it to guide cultivation, harvesting, handling and storage practices. Processors and product manufacturers can use it to guide their production, handling, packing and holding practices. Lawmakers can use it to guide the development, implementation and enforcement of commonsense regulations. This is the beauty and simplicity of fit-for-purpose, it can be applied to any situation and related to any type of product.

Growers can use fit-for-purpose to guide most aspects of their operation

Let us look at some practical examples of fit-for-purpose for cultivators and processors. Cultivators have three main areas of focus, growing, harvesting and storage, whereas processors and product manufacturers have it a little more complicated.

Cultivation of a Cannabis Plant

Growing

Requirements for growing a cannabis plant, including those that can be classified as “hemp”, should be dictated by the product with the strictest quality and safety specifications. For example, growing for smokable fruiting tops (i.e. the flowers) may require different cultivation techniques than other products. You may not want to apply the same pesticides or growth additives to a cannabis plant grown for smokable fruiting tops as you would to a cannabis plant grown for seed and fiber.

Harvesting

The next point is important – harvesting and handling requirements should be agricultural, period. Except for those products intended to be combusted or vaporized and then inhaled. Following our previous example, smokable fruiting tops may require different harvesting techniques than other products, especially if you are trying to maintain the aesthetic quality of these goods. You may choose a different harvesting technique to collect these fruiting tops than you would if primarily harvesting the seed and fiber and thinking of the leftover biomass as secondary.

Storage

When considering the products and their storage, you need to consider each one’s quality and safety specifications. One product may have a temperature specification, whereas another may have a humidity specification. You need to make sure that you store each product according to their individual quality and safety specifications. Then consider the products with the highest risks of diversion and potentially if you need to implement any extra protocols. Continuing our example – smokable fruiting tops, whether classifiable as “hemp” or not, pose a higher risk of theft than seeds or fiber and may require additional security measures depending on the authority having jurisdiction.

Processing and Manufacturing Operations

When applying fit-for-purpose to processing and manufacturing operations, first you must choose the products you want to make and specify the intended use for each product. This allows you to identify the quality and safety requirements and the potential for diversion for each good. Which in turn allows you to specify your manufacturing, processing and handling protocols for each product related to their quality and safety requirements. Then those specific products with higher risks of diversion requiring extra protocols to be put into place depending on local regulations and/or internal risk assessments, should be considered and your practices modified, as necessary.

Commonsense Regulations

Image if regulations governing a cannabis plant, its parts, products and associated processes were based on the intended use rather than a set of attributes that vary from jurisdiction to jurisdiction. It is complicated enough for regulators to think about a cannabis plant or cannabis product without having to worry about if that cannabis plant or cannabis product can be classified as “marijuana” or “hemp.” Fit-for-purpose removes this complication and simplifies the debate.

Using a fit-for-purpose approach eliminates the need to think about the molecular constituents and focuses the conversation on the intended use rather than one or two specific molecules – in this case, d9-THC, the boogie-man cannabinoid. Considering the intended use promotes consumer and environmental health and safety by allowing operators and regulators to focus on what is most important – quality and safety instead of whether something is “marijuana” or “hemp.”

This idea is what drives the real impact of fit-for-purpose. It creates a path forward to a one plant solution. We have where we are now – with “marijuana” and “hemp” – and where we want to get to – cannabis. It is all one plant with many different applications that can be used to create different commercial products. Fit-for-purpose helps bridge the gap between where we are now and where we want to get to and allows us to start thinking about “marijuana” and “hemp” in the same manner – the intended use.

Fit-for-purpose is a powerful concept that can be used for simplifying regulatory framework development, implementation and compliance. Regulations imposed on a cannabis plant, its parts and products should be appropriate to their intended use, i.e. “fit-for-purpose.” This approach challenges the confines of the current draconian bifurcation of the cannabis plant while working within this system to push the boundaries. It creates a path forward to a one plant solution and begs the question: Is the world ready for this novel concept?

extraction equipment

THC Remediation of Hemp Extracts

By Darwin Millard
1 Comment
extraction equipment

Remediation of delta-9 tetrahydrocannabinol (d9-THC) has become a hot button issue in the United States ever since the Drug Enforcement Agency (DEA) released their changes to the definitions of marijuana, marijuana extract, and tetrahydrocannabinols exempting extracts and tetrahydrocannabinols of a cannabis plant containing 0.3% or less d9-THC on a dry weight basis from the Controlled Substances Act. That is because, as a direct consequence, all extracts and tetrahydrocannabinols of a cannabis plant containing more than 0.3% d9-THC became explicitly under the purview of the DEA, including work-in-progress “hemp extracts” that because of the extraction process are above the 0.3% d9-THC limit immediately upon creation.

The legal ramifications of these changes to the definitions on the “hemp extracts” marketplace will not be addressed. Instead, this article focuses on the amount of d9-THC that is available in the plant material prior to extraction and tracks a “hemp extract” from the point it falls out of compliance to the point it becomes compliant again and stresses the importance of accurate track-n-trace protocols at the processing facility. The model developed to support this article was intended to be academic and was designed to follow the d9-THC portion of a “hemp extract” through the lifecycle of a typical CO2-based extract from initial extraction to THC remediation. A loss to the equipment of 2% was used for each step.

Initial Extraction

For this exercise, a common processing scenario of 1000 kg of plant material at 10% cannabidiol (CBD) and 0.3% d9-THC by weight was modeled. This amount, depending on scale of operations, can be a facility’s total capacity for the day or the capacity for a single run. 1000 kg of plant material at 0.3% d9-THC has 3 kg of d9-THC that could be extracted, purified, and diverted into the marketplace. CO2 has a nominal extraction efficiency of 95%, meaning some cannabinoids are left behind in the plant material. The same can be said about the recovery of the extract from the equipment. Traces of extract will remain in the equipment and this little bit of material, if unaccounted for, can potentially open an operator up to legal consequences. Data for the initial extraction is shown in Image 1.

Image 1: Summary Data Table for Typical CO2-based Extraction of Phytocannabinoids

As soon as the initial extract is produced it is out of compliance with the 0.3% d9-THC limit to be classified as a “hemp extract”, and of the 3 kg of d9-THC available, the extract contains approx. 2.8 kg, because some of the d9-THC remains in the plant material and some is lost to the equipment.

Dewaxing via Winterization and Solvent Removal

Dewaxing a typical CO2 extract via winterization is a common process step. For this exercise, a wax content of 30% by weight was used. A process efficiency of 98% was attributed to the wax removal process and it was assumed that 100% of the loss can be accounted for in the residue recovered from the equipment rather than in the removed waxes. Data for the winterization and solvent recovery are shown in Image 2 and 3.

Image 2: Summary Data Table for Typical Winterization of a CO2 Extract
Image 3: Summary Data Table for Solvent Removal from a CO2 Extract

Two things occur during winterization and solvent removal, non-target constituents are removed from the extract and there is compounded loss from multiple pieces of process equipment. These steps increase the concentration of the d9-THC portion of the extract and produce two streams of noncompliant waste.

Decarboxylation & Devolatilization

Most cannabinoids in the plant material are in their acid form. For this exercise, 90% of the cannabinoids were considered to be acid forms. Decarboxylation is known to produce a mass difference of 87.7%, i.e. the neutral forms are 12.3% lighter than the acid forms. Heat was modeled as the primary driver and a process efficiency of 95% was used for the conversion rate during decarboxylation. To simplify the model, the remaining 5% acidic cannabinoids are presumed destroyed rather than degraded into other compounds because the portion of the cannabinoids which get destroyed versus degrade into other compounds varies from process to process.

Devolatilization is the process of removing low-molecular weight constituents from an extract to stabilize it prior to distillation. Since the molecular constituents of cannabis resin extracts vary from variety to variety and process to process, the extracts were assumed to consist of 10% volatile compounds. The model combines the decarboxylation and devolatilization steps to account for complete decarboxylation of the available acidic cannabinoids and ignores their weight contribution to the volatiles collected during devolatilization. Destroyed cannabinoids result in an amount of loss that can only be accounted for through a complete mass balance analysis. Data for decarboxylation and devolatilization are shown in Image 4.

Image 4: Summary Data Table for Decarboxylation and Devolatilization of a CO2 Extract

As the extract moves along the process train, the d9-THC concentration continues to increase. Decarboxylation further complicates traceability because there is both a known mass difference associated with the process and an unknown mass difference that must be calculated and justified.

Distillation

A two-pass distillation was modeled. On each pass a portion of the extract was removed to increase the cannabinoid concentration in the recovered material. Average data for distilled “hemp extracts” was used to ensure the model did not over- or underestimate the concentration of the cannabinoids in the distillate. The variables used to meet these data constraints were derived experimentally to match the model to the scenario described and are not indicative of an actual distillation. Data for distillation is shown in Image 5.

Image 5: Summary Data Table for Distillation of a Decarboxylated and Devolatilized Extract

After distillation, the d9-THC concentration is shown to have increased by 874% from the original concentration in the plant material. Roughly 2.2 kg of the available 3 kg of d9-THC remains in the extract, but 0.8 kg of d9-THC has either ended up in a waste stream or walking out the door.

Chromatography – THC Remediation Step 1

Chromatography was modeled to remove the d9-THC from the extract. Because there are several systems with variable efficiency rates at being able to selectively isolate the d9-THC peak from the eluent stream, the model used a 5% cut-off on the front-end and tail-end of the peak, i.e. 5% of the material before the d9-THC peak and 5% of the material after the d9-THC peak is assumed to be collected along with the d9-THC. Data for chromatography is shown in Image 6.

Image 6: Summary Data Table for d9-THC Removal using Chromatography

After chromatography, a minimum of three products are produced, compliant “hemp extract”, d9-THC extract, and noncompliant residue remaining in the equipment. The d9-THC extract modeled contains 2.1 kg of the available 3 kg in the plant material, and is 35% d9-THC by weight, an increase of 1335% from the distillation step and 11664% from the plant material.

CBN Creation – THC Remediation Step 2

For this exercise, the d9-THC extract was converted into cannabinol (CBN) using heat rather than cyclized into d8-THC, but a similar model could be used to account for this scenario. The conversion rate of the cannabinoids into CBN through heat degradation alone is low. Therefore, the model assumes half of the available cannabinoids in the d9-THC extract are converted to CBN. The entirety of the remaining portion of the cannabinoids are assumed to convert to some form of degradant rather than a portion getting destroyed. Data for THC destruction is shown in Image 7.

Image 7: Summary Data Table for THC Destruction through Degradation into CBN

Only after the CBN cyclization step has completed does the product that was the d9-THC extract become compliant and classifiable as a “hemp extract.”

Image 8: Summary Data Table for Reconciliation of the d9-THC Portion of the Hemp Extract

Throughout the process, from initial extraction to the final d9-THC remediation step, loss occurs. Of the 3 kg of d9-THC available in the plant material only 2.1 kg was recovered and converted to CBN. 0.9 kg was either lost to the equipment, destroyed in the process, attributable to the mass difference associated with decarboxylation, or was never extracted from the plant material in the first place. All of these potential areas of product loss should be identified, and their diversion risk fully assessed. Not every waste stream poses a risk of diversion, but some do; having a plan in place to handle waste the DEA considers a controlled substance is essential. Without a track-n-trace program following the d9-THC and identifying the potential risk of diversion would be impossible. The point of this is not to instill fear, instead the intention is to shed light on a very real issue “hemp extract” producers and state regulators need to understand to protect themselves and their marketplace from the DEA.

New Guidance on Waste Disposal for Hemp Producers

By Stephanie McGraw, Emily Sellers
No Comments

On January 15, 2021, the USDA published its final rule on US hemp production. The rule, which becomes effective on March 22, 2021, expands and formalizes previous guidance related to waste disposal of noncompliant or “hot” crops (crops with a THC concentration above .3 percent). Importantly for the industry, the new disposal rules remove unduly burdensome DEA oversight and provides for remediation options.

Producers will not be required to use a DEA reverse distributor or law enforcement to dispose of noncompliant plants. Instead, producers will be able to use common on-farm practices for disposal. Some of these disposal options include, but are not limited to, plowing under non-compliant plants, composting into “green manure” for use on the same land, tilling, disking, burial or burning. By eliminating DEA involvement from this process, the USDA rules serve to streamline disposal options for producers of this agricultural commodity.

Alternatively, the final rule permits “remediation” of noncompliant plants. Allowing producers to remove and destroy noncompliant flower material – while retaining stalk, stems, leaf material and seeds – is an important crop and cost-saving measure for producers, especially smaller producers. Remediation can also occur by shredding the entire plant to create “biomass” and then re-testing the biomass for compliance. Biomass that fails the retesting is noncompliant hemp and must be destroyed. The USDA has issued an additional guidance document on remediation. Importantly, this guidance advises that lots should be kept separate during the biomass creation process, remediated biomass must be stored and labeled apart from each other and from other compliant hemp lots and seeds removed from non-compliant hemp should not be used for propagative purposes.

The final rules have strict record keeping requirements, such rules ultimately protect producers and should be embraced. For example, producers must document the disposal of all noncompliant plants by completing the “USDA Hemp Plan Producer Disposal Form.” Producers must also maintain records on all remediated plants, including an original copy of the resample test results. Records must be kept for a minimum of three years. While USDA has not yet conducted any random audits, the department may conduct random audits of licensees.

Although this federal guidance brings some clarity to hemp producers, there still remains litigation risks associated with waste disposal. There are unknown environmental impacts from the industry and there is potential tort liability or compliance issues with federal and state regulations. For example, as mentioned above, although burning and composting disposal options for noncompliant plants, the final rule does not address the potential risk for nuisance complaints from smoke or odor associated with these methods.

At the federal level, there could be compliance issues with the Resource Conservation and Recovery Act (RCRA), Comprehensive Environmental Response Compensation and Liability Act (CERCLA) and ancillary regulations like Occupation Safety and Health Administration (OSHA). In addition to government enforcement under RCRA and CERCLA, these hazardous waste laws also permit private party suits. Although plant material from cultivation is not considered hazardous, process liquids from extraction or distillation (ethanol, acetone, etc.) are hazardous. Under RCRA, an individual can bring an “imminent and substantial endangerment” citizen suit against anyone generating or storing hazardous waste in a way the presents imminent and substantial endangerment to health or the environment. Under CERCLA, private parties who incur costs for removal or remediation may sue to recover costs from other responsible parties.

At the state level, there could be issues with state agency guidance and state laws. For example, California has multiple state agencies that oversee cannabis and hemp production and disposal. CA Prop 65 mandates warnings for products with certain chemicals, including pesticides, heavy metals and THC. The California Environmental Quality Act (CEQA) requires the evaluation of the environmental impact of runoff or pesticides prior to issuing a cultivation permit. Both environmental impact laws permit a form of private action.

Given the varied and evolving rules and regulation on hemp cultivation, it remains essential for hemp producers to seek guidance and the help of professionals when entering this highly regulated industry.