Tag Archives: law

November 19, 2019

The Great European Cannabis Cosmetics Confusion

By Marguerite Arnold

If the “recreational” discussion is off the table for now except in a few local sovereign experiments (Luxembourg, Switzerland, Denmark, Holland), and the medical discussion is mired in “efficacy” and payments (Germany, UK), where does that leave this third area of cannabis products?

Namely cosmetics.

The answer? Because this conversation involves cannabis, as usual, the discussion is getting bogged down in confusion even as industry groups press for clarification and guidelines.

The Problem

Cosmetics, including externally applied creams, lotions and potions, are of course subject to regulation and testing beyond cannabinoids. Think of your favourite cosmetic product and the notices about no animal testing (et al). Yet when the conversation comes to cannabis, of course, even of the hemp kind, the current discussion in the EU is mired in confusion, and of course ongoing stigma. Not science. Or even logic.

The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

According to the EU Working Group on Cosmetic Products earlier this year, ingredients containing CBD (even derived from hemp) should be banned from cosmetics production because of the ban on cannabis as an illicit substance under the 1961 Single Convention on Narcotic Drugs. Guidance under the Cosing Catalogue (a database of allowed and banned ingredients) gives individual EU member states a framework to set national rules for cosmetics.

To add to the confusion, the EU also added new entries to the EU inventory of cosmetic ingredients which outlaw CBD derived from extracts, tincture or resin. But – in a bizarre bureaucratic swerve, they did approve “synthetically produced CBD.”

Opponents of the ruling – including the European Industrial Hemp Association (EIHA) have of course opposed the newest guidelines on regs. CBD, as the EIHA has mentioned repeatedly, is not referenced specifically in the 1961 Convention.

The EIHA wants the EU to treat cosmetics like other CBD products – namely requiring that they have less than 0.2% THC.

The EIHA Proposal

The EIHA has its own proposal for setting guidelines under Cosing. Namely that extracts from industrial hemp and pure CBD should only be prohibited from use in cosmetic products if they are not manufactured in compliance with laws in the country of origin.

Further, the EIHA has also pointed out that the seeds and leaves of industrial hemp and any products derived from the same are also clearly excluded from the 1961 Convention.

However, and herein lies the rub – even within the EU, there is not yet harmonization on these standards between countries. So, what may pass for “legal” in the country of production may also not pass for products that are then exported – even within the EU and or in Europe.

EIHA also has proposed new wording for the definition of Cannabidiol based on the International Nomenclature of Cosmetics Ingredients (INCI), the most comprehensive and widely recognized international list of ingredients used in cosmetics and personal care products.

Where Does This Cross With Novel Food?

Of course there is also the confusion in the room about cannabis extracts as “novel food.” Cosmetics of course are designed for external application, but cannabis tinctures and extracts containing “CBD” are being put in that category right now by regulators in the EU. The fact that novel food is also in the room may in fact be the reason that regulators are apparently sanguine about synthetic CBD in cosmetics, but not that derived from the actual plant.

The cannabis discussion is going to be in the room for many years to come and on all fronts – from medication to food to cosmetics.Bottom line? There are, at present, no easy answers. This leaves the CBD industry in the EU, at all levels, as the planet barrels into the third decade of this century, in basically a state of limbo. If not absolute confusion.

What Is The Outlook?

While it may not be “pretty” right now, the industry is clearly moving through channels to pressure and challenge regulators at key international points and places.

What is increasingly obvious however, is that the problem with cannabis – at all levels – will not be solved soon, or easily. Even calls for “recreational reform” or even “descheduling” will not cure them.

Cannabis as a plant, if not a substance used in everyday living has been so stigmatized over the last 100 years that a few years of reform – less than a decade if one counts the organization of the industry since 2013 globally – will not come close to fixing if not ironing out the bugs.

The cannabis discussion, in other words, is going to be in the room for many years to come and on all fronts – from medication to food to cosmetics.

November 18, 2019

Standardization: A Guide Through the Minefield

By Steven Burton

No Comments

Now that cannabis edibles have been legalized nationally in Canada, many existing and aspiring license holders have been surprised to discover that they must comply with food safety regulations. This became crystal clear when Health Canada published their Good Production Practices Guide For Cannabis in August 2019.

With this development, it should be obvious to everyone that Good Manufacturing Practices (GMP) certifications are simply not enough.

Hazard Analysis and Critical Control Point (HACCP) based preventative control programs are now the absolute minimum and higher levels of certification (GFSI) should be on everyone’s wish list.

HACCP is a methodology that is all about identifying biological, chemical and physical hazards and determining how they will be controlled to mitigate the risk of injury to humans. Recently, bio-terrorism and food fraud hazards have been added to the list and it is a good idea to address quality hazards as well.

The process of developing a HACCP program involves identifying these hazards with respect to ingredients, materials, packaging, processes and cross-contamination points (explicitly required in Canada only). However, it is a specific ingredient hazard that I’d like to talk about here.

As this market has emerged, I’ve met with many cannabis companies as the onerous levels of knowledge and effort required to build and maintain an effective HACCP program manually has dawned upon the industry. Many are looking for technological solutions to quickly solve this problem. During these discussions, a curious fact has emerged that set off the food safety alarm klaxons around here.

Most people alive today are too young to remember this but, with few exceptions, the standardization of ingredients is a relatively modern phenomenon. It used to be that the fat content of your milk varied from season to season and cow to cow. Over time, the food industry standardized so that, amazingly, you can now choose between milks with either 1% or 2% fat, a level of precision that would border on miraculous to someone born in the early 20th century.

The standardization of ingredients is important in terms of both quality and safety. Take alcohol for example. We know that a shot of spirits generally contains 40% alcohol. Different products may vary from this standard but, if I pour a shot of my favourite Bowmore No.1 single malt in Canada or Tasmania, this year or 10 years from now, I can expect a consistent effect from the 40% alcohol content of the quantity I’ve imbibed.

Imagine a world in which this was not the case, where one shot would be 40% but the next might be 80%. Things could get out of control quite easily at the 80% level so, to avoid this, distillers monitor and blend their product to ensure they achieve the 40% target, which is called the “standardization marker”.

With respect to cannabis, the obvious standardization marker is THC. During the manufacturing process, edibles manufacturers do not normally add cannabis flower directly into their products but instead add a THC concentrate produced during previous production steps. However, we’ve found that the wisdom of standardizing these concentrates has not yet dawned upon many in the industry, which is alarming at best and dangerous at worst.

The reason for this is that, since cannabis is inherently a heterogeneous plant, one cannot precisely achieve a particular marker value so the outcome of the concentration process is variable. The food industry long ago overcame this problem by blending or diluting to achieve a consistent marker concentration, but the cannabis industry has not yet adopted this advance.

The cannabis edibles industry is still immature and it will take time to bring all the necessary risk mitigation processes into place but one excellent place to start is to seriously consider standardizing concentrates to a THC marker.Instead, manufacturers simply keep track of the strength of each batch of concentrate and then adjust the quantity added to their recipes to achieve the desired THC content. This seems logical on the surface but presents a serious risk from the HACCP perspective, namely a chemical hazard, “Excessive psychoactive compound concentrations due to human error at levels that may be injurious to human health”.

The reality is that workers make mistakes, which is why it is imperative to mitigate the risk of human error insomuch as possible. One of the best ways to do this is to standardize to avoid the scenario where a worker, faced with a row of identical containers that are differentiated only by a tiny bit of text, accidentally grabs the wrong bottle. The error isn’t caught until the product has been shipped, consumed, and reports of hospital visits start coming in after the authorities trace the problem back to you. You must bear the costs of the recall, your reputation has been decimated and your company is floundering on the financial rocks.

US-based Drip More, LP recently found this out the hard way after consumers complained that their product tasted bad, bitter and/or harsh. An investigation determined that excessive nicotine content was the source of the problem and a voluntary recall was initiated. Affected product that had already been sold in 26 states. The costs of this recall have not been tallied but they will be staggering.

November 18, 2019

Soapbox

3 Food Safety Precautions for Edibles

By Cindy Rice

No Comments

You’ve survived seasons of cannabis cultivations, bringing in quality plants in spite of mold, mites, drought and other challenges that had to be conquered. Extraction methods are sometimes challenging, but you are proud to have a cannabinoid extract that can be added into your own products for sale. Edibles are just waiting to be infused with the cannabinoids, for consumers demanding brownies, gummies, tinctures and almost any food and beverage imaginable. You’ve been through the fire, and now the rest is easy peasy, right?

Food processing and sanitation — Avoiding cross contamination should be a priority for edibles manufacturing

Actually, producing edibles may not be so seamless as you think. Just as in the rest of the food industry, food safety practices have to be considered when you’re producing edibles for public consumption, regardless of the THC, CBD, terpene or cannabinoid profile. Once you’ve acquired the extract (a “food grade ingredient”) containing the active compounds, there are three types of hazards that could still contribute to foodborne illness from your final product if you’re not careful- Biological, Chemical and Physical.

Biological hazards include pathogenic bacteria, viruses, mold, mildew (and the toxins that they can produce) that can come in ingredients naturally or contaminate foods from an outside source. Chemical hazards are often present in the kitchen environment, including detergents, floor cleaners, disinfectants and caustic chemicals, which can be harmful if ingested- they are not destroyed through cooking. Physical objects abound in food production facilities, including plastic bits, metal fragments from equipment, staples or twist ties from ingredient packages, and personal objects (e.g., buttons, jewelry, hair, nails.)

There are three main safety precautions that can help control these hazards during all the stages of food production, from receiving ingredients to packaging your final products:

1. Avoid Cross Contamination

Prevent biological, chemical or physical hazards from coming into contact with foods
Keep equipment, utensils and work surfaces clean and sanitized.
Prevent raw foods (as they usually carry bacteria) from coming into contact with “Ready-to-eat” foods (foods that will not be cooked further before consuming).
Keep chemicals away from food areas.

2. Personal Hygiene

Don’t work around foods if you’re sick with fever, vomiting or diarrhea. These could be signs of contagious illness and can contaminate foods or other staff, and contribute to an outbreak.
Do not handle ready-to-eat foods with bare hands, but use a barrier such as utensils, tissues or gloves when handling final products such as pastries or candies.
Wash hands and change gloves when soiled or contaminated.
Wear hair restraints and clean uniforms, and remove jewelry from hands and arms.

3. Time & Temperature control

Prevent bacterial growth in perishable foods such as eggs, dairy, meats, chicken (TCS “Time and Temperature Control for Safety” foods according to the FDA Model Food Code) by keeping cold foods cold and hot foods hot.
Refrigerate TCS foods at 41˚ F or below, and cook TCS foods to proper internal temperatures to kill bacteria to safe levels, per state regulations for retail food establishments.
If TCS foods have been exposed to room temperature for longer than four hours (Temperature Danger Zone 41˚ F – 135˚ F,) these foods should be discarded, as bacteria could have grown to dangerous levels during this time.

As cannabis companies strive for acceptance and legalization on a federal level, adopting these food safety practices and staff training is a major step in the right direction, on par with standards maintained by the rest of the retail food industry. The only difference is your one specially extracted cannabinoid ingredient that separates you from the rest of the crowd… with safe and healthy edibles for all.

November 18, 2019

The Women in Cannabis Study: A Q&A with Jennifer Whetzel

By Aaron G. Biros

1 Comment

Ladyjane Branding and Wolfe Research & Consulting are leading an ambitious study to explore and document the experiences of women working in the cannabis market. Women in Cannabis: A Living History officially kicks off on December 10^th at the National Women of Cannabis Conference.

Jennifer Whetzel, founder of LadyJane Branding and founder of the Women in Cannabis Study

Jennifer Whetzel, founder of Ladyjane Branding, says this is an opportunity for women to tell their stories about their experience working in the cannabis industry. Women can participate in the study by going to womenincannabis.study and sign up to take the survey. You can also sign up to be a sponsor or partner of the study at that website. Sponsors will get access to content like press releases and the opportunity to incorporate the study’s findings in their messaging. We invite our readers to participate, sponsor, partner, share and encourage friends to take the survey.

With beta testing starting the week of November 18^th, we caught up with Jennifer Whetzel to talk about why she decided to start this project, what they expect to learn from it and what the future may hold for professional women in the cannabis industry.

Cannabis Industry Journal: Can you tell us a bit about your background and how you came into the cannabis industry?

Jennifer Whetzel: My entrance into the cannabis industry was certainly a culmination of my personal experience and professional journey.

After moving to Maine, I became a medical user to ease symptoms of an immune and an auto-immune disorder. When I sought out treatment for PTSD, I found that a combination of cannabis, therapy, meditation and brain retraining was the most helpful and healthy solution.

This course of treatment for PTSD was life-changing as it allowed me to resolve symptoms from all of my medical issues, and I wanted to find a way to give back to the community that supported me. I had been working in marketing for over 25 years and realized I had quite the diverse professional background. My experience included retail merchandising and operations, public relations on a military base, research design and strategy for ad agencies, new product development and launch for animal health companies, and experiential marketing strategy and design. I’ve been lucky enough to work with small companies and Fortune 500’s which has led to finding solutions in unexpected places.

When pairing my knowledge and skills with the cannabis community, I realized I could make an impact by advising new entrepreneurs who needed help making their brands stand out. That’s how Ladyjane Branding was born.

CIJ: Can you give us an overview of the Women in Cannabis Study?

Jennifer: The Women in Cannabis study aims to understand how women are faring in the cannabis industry and whether we are doing enough to support women, their careers and their professional goals. It’s well documented that women in corporate America do not have the same opportunities for career advancement as men, holding fewer executive or board positions, having fewer opportunities for mentorship, sponsorship and career progression.

The study is comprehensive, with more than 80 quantitative questions along with qualitative telephone and video interviews of female-identifying professionals working in the cannabis industry – whether they are involved with cannabis, CBD or hemp. Through monthly infographics, video summaries, quarterly in-depth themed reports and a comprehensive year-end report, we will be telling the stories of women’s professional experiences in cannabis with the goal of transforming the industry into one where women can succeed and thrive.

Painting a picture of the women in cannabis, and understanding them as a group, we look at demographics to explore their diversity and reveal whether personality differences may affect their experiences, as well as experience with stigmas regarding cannabis use and working in the industry.

To understand professional trajectories and roadblocks on a path to success, we dive into work history, reasons for entering the cannabis space and the barriers they have faced on their journey. We explore opportunities for mentorship, support and leadership, the types of harassment, discrimination and disrespect they’ve experienced and how that may have impeded their careers.

We’d like to understand how (or whether) women find balance in their personal and professional lives, what sacrifices they’ve had to make for a career in cannabis, as well as best practices for women to foster success.

CIJ: Why did you decide to take on this endeavor and lead the work on this study?

Jennifer: While there are numerous studies looking at how women fare in corporate America, we found that there’s a lack of a recent and comprehensive deep dive into this topic specifically for cannabis. As an emerging industry, we have a unique opportunity to make valuable recommendations to potentially increase inclusivity for women in this early stage of industry culture before it becomes too entrenched. Our goal is to ensure we have the hard numbers to document a baseline now, then follow-up over time to understand how the industry changes.

By surveying and speaking to women in the industry, and understanding where strengths and weaknesses in the industry lie, we can make recommendations to improve the lived experience for women working in this industry.

The only way to make improvements to a system is to understand it.

CIJ: How do you think we can create a more inclusive industry?

Jennifer: I think it begins with an understanding of where we are starting – we don’t know what we don’t know. Being in the cannabis industry, we often hear the argument that anecdotes are not data. Just like we need the scientific data to prove efficacy for medicine, we need the data that shows the hard numbers about diversity and inclusion, the stigma and shame of cannabis use or working in this industry, about sexual harassment, disrespect and bullying.

This study is about generating information and creating knowledge on this issue so we can determine the education, policies, procedures and actionable recommendations that can help make the industry a welcoming space for everyone.

One of the best ways to create a more inclusive industry is through education.

CIJ: What hurdles do women face in the cannabis industry? How is that different from other, more established industries?

Jennifer: As we review research results from more established industries, it seems clear that women face similar hurdles in cannabis. Various studies have shown that working women are faced with unequal pay, fewer opportunities for mentorship or sponsorship, as well as discrimination and disrespect. The issues for female entrepreneurs are even greater as women are significantly less likely to receive venture capital funding, which certainly speaks to experience in the cannabis industry.

Because there’s little data specifically focused on the cannabis industry, we are just guessing. This study will provide us those answers.

CIJ: Looking ahead, how do you think women will fare in the evolution of the cannabis market?

Jennifer: I’d like to think that if we are all purposeful and intentional about creating an equitable, inclusive, and representational industry, that women will fare significantly better than they have in other industries typically dominated by men. If that can happen, everyone will feel welcome and respected, and it will no longer be surprising news when a woman is promoted to CEO or becomes a successful founder.

November 14, 2019

Moisture Matters: Why Humidity Can Make or Break a Cannabis Cultivator’s Bottom Line

By Sean Knutsen

1 Comment

Vintners have known for centuries that every step in the winemaking process—from cultivation and harvest techniques to fermentation, aging and bottling—has immense impact on the quality and value of the final product.

And that same level of scrutiny is now being applied to cannabis production.

As someone who has worked in the consumer-packaged goods (CPG) space for decades, I’ve been interested in finding out how post-harvest storage and packaging affect the quality and value of cannabis flower. After digging into the issue some more, storage conditions and humidity levels have indeed come into focus as major factors, beyond just the challenges of preventing mold.

Weighty Matters

I enlisted my research team at Boveda, which has studied moisture control in all manner of manufactured and natural CPG products, to look closer at what’s happening with cannabis once it leaves the cultivation room. There’s not a lot of research on cannabis storage—we checked—and so we explored this aspect further. We were frankly surprised by what a big effect evaporation has on quality and how this is playing out on the retail level.

We suspected moisture loss could affect the bottom line too, and so we did some number-crunching.

It’s well understood that the weight of cannabis flower directly correlates with its profitability—the heavier the yield, the higher the market value. Here’s what our analysis found: A mere 5% dip below the optimal relative humidity (RH) storage environment eliminates six pounds per every 1,000 pounds of cannabis flower. At $5 per gram wholesale, that works out to upwards of $13,500 in lost revenue—and that’s with just a 5% drop in RH below the target range of 55-65% established by ASTM International, an independent industry standards organization.

We also purchased flower at retailers in multiple state markets and commissioned a lab to test the samples, which revealed that most strains sold today are well below the optimal RH range (55-65%). Regardless of fluctuating wholesale prices, when you do the math it’s clear that tens of thousands of dollars in revenue are simply evaporating into thin air.

Why So Dry?

Historically, cultivators, processors and packagers have emphasized keeping flower below a particular humidity “ceiling” for a reason: Flower that’s too moist is prone to hazardous mold and microbial growth, so it’s understandable that many operators err on the side of being overly dry.

The misconception that cannabis flower can be “rehydrated” is another cause of dryness damage. But this method irrevocably damages the quality of the flower through trichome damage.

trichome close up — The fine outgrowths, referred to as trichomes, house the majority of the plant’s resin

Those delicate plant structures that house the all-important cannabinoids and terpenes become brittle and fragile when stored in an overly dry environment, and are prone to breaking off from the flower; they cannot not be recovered even if the flower is later rehydrated.

When trichomes are compromised, terpenes responsible for the aroma, taste and scent of cannabis also can evaporate. Overly dried-out cannabis doesn’t just lose weight and efficacy—it loses shelf appeal, which is particularly risky in today’s market.

Today’s consumers have an appreciation for how premium flower should look, smell and taste. Rehydration cannot put terpenes back in the flower, nor can it re-attach trichomes to the flower, which is why preservation of these elements is so key.

Cannabis Humidity Control

Cured cannabis flower can remain in storage potentially for months prior to sale or consumption. By the time it reaches the end consumer, much of the cannabis sold in regulated environments in the U.S. and Canada has suffered from dry damage.

There are various humidity controls available for cannabis cultivators: desiccants that absorb water vapor; mechanical equipment that alters RH on a larger scale; or two-way humidity-control packets designed for storage containers.

In the CPG sector, with other moisture-sensitive products such as foods and electronics, we’ve seen that employing humidity controls will preserve quality, and cannabis flower is no different.

Saltwater-based humidity control solutions with two-way vapor-phase osmosis technology automatically add or remove water vapor as needed to maintain a constant, predetermined RH level and ensures a consistent level of moisture weight inside the cannabis flower.

Here’s one more notable finding we discovered in our storage research: Third-party lab tests commissioned by Boveda showed cannabis stored with humidity control had terpene and cannabinoid levels that were 15% higher than cannabis stored without.

Cannabis stored within the optimal humidity range maximizes all the qualities that attract and retain customers. Similar to wine-making, when cannabis cultivators focus on quality control they need to look beyond the harvest.

November 14, 2019

Beyond THC: Encouraging Cannabinoid and Terpene Production with LEDs

By Andrew Myers

No Comments

For years, tetrahydrocannabinol (THC) got all the attention. While THC certainly delivers its own benefits (such as relaxation and pain relief), there’s a whole host of other – and often overlooked – compounds found in cannabis with important benefits as well. THC is truly only the tip of the iceberg when it comes to cannabis’s potential.

As the cannabis industry evolves with changing consumer tastes and developing medical research, growers may employ techniques to boost cannabinoid and terpene profiles in their harvests – beyond merely focusing on THC. Advanced LEDs allow growers to elicit specific biological responses in cannabis crops, including increased concentrations of these naturally occurring chemical compounds.

The Foundation of Cannabis’s Effects
Whether used medicinally or otherwise, cannabis has changed our society and many of our lives – and there’s a collection of naturally occurring chemical compounds, known as cannabinoids and terpenes, to thank.

The cannabinoids THC and CBD are the most common and well-researched, however they are accompanied by more than 200 additional compounds, including cannabinol (CBN), cannabigerol (CBG) and tetrahydrocannabivarin (THCV), among others.
The cannabis plant also contains terpenes. These structures are responsible for giving flowers (including cannabis), fruits and spices their distinctive flavors and aromas. Common terpenes include limonene, linalool, pinene and myrcene.

Both cannabinoids and terpenes are found in the cannabis plant’s glandular structures known as trichomes. Look closely, and you’ll notice trichomes coating the cannabis flowers and leaves, giving the plant an almost frosty appearance.

macropistil/trichome — A macro view of the trichomes and pistils on the plant

Trichomes – which are found across several plant species – are a key aspect of a cannabis plant’s survival. The specific combination of metabolites produced by trichomes may attract certain pollinators and repel plant-eating animals. Moreover, trichomes (and specifically THC) may act as the plant’s form of sunscreen and shield the plant from harmful ultraviolet rays.

While they play an essential part in the cannabis plant’s lifecycle, trichomes are volatile and easily influenced by a range of environmental factors, including light, heat, physical agitation and time. Therefore, environment is a defining variable in the development of these important structures.

How LEDs Support Cannabinoid and Terpene Development in Crops
Spectrally tunable LEDs give indoor cannabis growers unparalleled control over their crops. As research has expanded about plants’ responses to the light spectrum, growers have discovered they are able to elicit certain physiological responses in the plant. This phenomenon is called photomorphogenesis. At its root, photomorphogenesis is a survival tactic – it’s how the plant responds to miniscule changes in its environment to increase the chances of reaching full maturity and, eventually, reproducing. While cultivated cannabis plants won’t reproduce at an indoor setting, growers can still use the light spectrum to encourage strong root and stem development, hasten the flowering process and the development of bigger, brightly colored flowers.

It makes sense that using the proper light spectrums may also have an impact on the production of specific cannabinoids and terpenes – an important factor when responding to highly specific consumer needs and desires, both within medical and adult-use markets.

Here are a few more reasons why utilizing full-spectrum LEDs can lead to higher quality cannabis:

Lower Heat, but the Same Intensity.
When compared to HPS, fluorescent and other conventional lighting technologies, LEDs have a much lower heat output, but provide the same level of intensity (and often improved uniformity). This represents an enormous advantage for cannabis cultivators, as the lights can be hung much closer to the plant canopy without burning trichomes than they would be able to with other lighting technologies.
UV Light. Cannabinoids and terpenes are part of the cannabis plant’s natural defense mechanism, so it makes sense that lightly stressing plants can boost cannabinoid and terpene numbers. Some studies illustrate an increase in UV-B and UV-A light can lead to richer cannabinoid and terpene profiles.¹ It’s a fine line to walk, though – too much UV can result in burned plants, which leads to a noticeable drop in cannabinoids.
Full-Spectrum Capabilities. The cannabis plant evolved over millions of years under the steady and reliable light of the sun. Full-spectrum is the closest thing to natural sunlight that growers will be able to find for indoor growing – and they’ve been shown to perform better in terms of cannabinoid development. A 2018 study titled “The Effect of Light Spectrum on the Morphology and Cannabinoid Content for Cannabis Sativa L.,” explored how an optimized light spectrum resulted in increased expression of cannabinoids CBG and THCV.²

This is the most important tip for indoor growers: your plants’ environment is everything. It can make or break a successful harvest. That means cultivators are responsible for ensuring the plants are kept in ideal conditions. Lights are certainly important at an indoor facility, but there are several other factors to consider that can affect your lights’ performance and the potency of your final product. This includes your temperature regulation, humidity, the density of plants within the space, CO2 concentration and many other variables. For the best results, your lights should be fully aligned with other environmental controls in your space. Nothing sabotages a once-promising crop like recurrent issues in the indoor environment.

solsticegrowop_feb — Indoor cultivation facilities often use high powered lights that can give off heat

Cannabinoids and terpenes take time to develop – so cultivators will want to avoid harvesting their plants too early. On the other hand, these compounds begin to degrade over time, so growers can’t wait too long either.

Cultivators seeking potent cannabinoid and terpene profiles must find a happy medium for the best results – and the best place to look is where cannabinoids and terpenes develop: the trichomes. With a microscope, cultivators can get up close and personal with these sparkly structures. Younger plants begin with clear trichomes, which eventually become opaque and change to amber. Once your plants show amber-hued trichomes, they’re ready for harvest.

The truth here is that there’s no perfect formula to elicit show-stopping cannabinoids and dizzying terpenes with every harvest. A lot of cannabis cultivation is based around trial-and-error, finding what works for your space, your business and your team. But understanding the basics around indoor environmental controls like lighting and temperature – and how they can affect the development of cannabinoids and terpenes – is an excellent place to start. Using high quality equipment, such as full-spectrum LED lighting can boost both cannabinoid and terpene production, resulting in richer, more potent and higher quality strains.

References:

Lyndon, John, Teramura, Alan H., Coffman, Benjamin C. “UV-B Radiation Effects on Photosynthesis, Growth and Cannabinoid Production of Two Cannabis Sativa Chemotypes.” August 1987. Photochemistry and photobiology. Web. https://onlinelibrary.wiley.com/doi/abs/10.1111/j.1751-1097.1987.tb04757.x?&sid=nlm%3Apubmed
Magagnini G., Grassi G., Kotiranta, S. “The Effect of Light Spectrum on the Morphology and Cannabinoid Content of Cannabis sativa L.” 2018. Medical Cannabis and Cannabinoids. Web: https://www.karger.com/Article/FullText/489030

November 14, 2019

NHS Finally Approves A Few Cannabis-Based Medicines for England & Wales

By Marguerite Arnold

No Comments

You have to hand it to the Brits right now. There is nothing that seems to be working in a land caught in the gray zone of “Brexit or Not.”

That absolutely can be said for cannabis prescriptions and the subsequent availability of the drug, via the National Health Service (NHS). For all the hand-wringing and drama so far, it has only taken a year between possibility and execution. That said if Brexit were that “fast” who knows what might have already happened to the NHS to begin with?

Regardless of the many deservedly snarky comments in the room (from both the British and elsewhere point of view), here are the basics:

Cannabis-based medicine will be available only to treat two relatively rare forms of childhood epilepsy, Multiple Sclerosis, or chemo-induced nausea caused by cancer treatment. The drug can also only be prescribed by specialist doctors (not GPs).

Who says the NHS and the National Institute for Health and Care Excellence (or NICE for short) doesn’t move quickly?

Perhaps they should have attended the 10th biannual IACM conference in Berlin at the beginning of the month. There were certainly reform-minded Brits who did.

What Were They Thinking?

When reading the recommendations from NICE, it is hard to imagine how a medical policy body could get most of the cannabis discussion so wrong. While it is nice to know that dying children seem to be highly effective in setting drug policy in the UK, that is hardly comforting to the potentially millions of adult Brits who have absolutely been left out, this time.

This begs the question why an adult in chronic pain or suffering muscular spasticity of a kind not caused by MS (much less adult epileptics) is somehow in a different basket of care? Indeed, the idea of recommending against the use of THC specifically for chronic pain is, at this point, a sign of at minimum gross inability to read even recent medical studies from just about everywhere, not to mention patient evidence and testimony. Those adults who managed to get coverage, at least so far, will be given the right to continue treatment until their doctor decides otherwise. Not a very comforting place to be.

Here Comes The Gray And Black Market

All this will do of course, is push those who do not qualify for NHS coverage into either the private market (if they can afford it), or more likely, the existing gray and black market. The former of which of course, is, like other places, underground.

And while GW Pharmaceuticals has everything to cheer about, the rest of the established industry, at this point, surely should be ready to take a concerted stand.

The ridiculous posture of the NHS beyond that on cannabis in this day and age is hard to understand. Even the Germans are ahead of them. And Deutschland is hardly a country where the use of cannabis is anything like mainstream yet.

But then, welcome again, to the wacky world of cannabis reform where it is possible to take one step forward and then many back.

Is This The Face Of The British Conversation Post Brexit?

If there were a single conversation to unite a country right now, the medical coverage of cannabis for the country’s poorest and sickest might be it.

Unfortunately, this does not appear to be a conversation that will progress in the UK until it moves in the United States. Federal reform in America would of course open the doors, and immediately, to a state-like “recreational” market, where, theoretically, patients could buy any kind of cannabis they want.

Just like Colorado. Or California.

But here is the rub. In the United States, federal reform has not come yet. And even then, what health insurers decide to cover or not, and for what condition, is a topic many Brits have never had to really contemplate. And certainly not when it comes to cannabis. This new decision by the health authorities might just be a terrifying glimpse of what is yet on the agenda if and when Britain “divorces” the continent.

Is The Dream Of Medical Coverage For Cannabis Just That?

Here is the good news. Cannabis always makes progress, no matter how long the slog has been. If the Brits are determined to sit this one out while their citizens suffer, the conversation is still alive, if struggling, elsewhere. Notably Germany. And Israel.

These are, to date, the only two countries who have jumped in, seriously, on the issue of insurance coverage of cannabis, and for a broad range of conditions, although even here in both countries, there are still issues and controversies galore.

The terrible reality in the room however, is clearly writ large for all those who are brave enough to grasp it. Most patients are going to be on the hook for the cost of their medical cannabis for a long time to come.

November 12, 2019

North Carolina Gets First Accredited Cannabis Lab

By Cannabis Industry Journal Staff

No Comments

In a press release published on Monday, the American Association for Laboratory Accreditation (A2LA), announced the renewal of accreditation for Global Laboratory Services, Inc. for ISO 17025:2017 in cannabis testing. The laboratory, based in Wilson, North Carolina, becomes first cannabis testing laboratory accredited in that state by adding the industrial hemp testing to their chemical scope of accreditation.

According to Kim Hesse, business development manager at Global Laboratory Services, they plan to expand their services in the hemp market with additional types of hemp testing. “At Global Laboratory Services, we always strive to keep pace with industry needs,” says Hesse. “We saw the need for an accredited laboratory in the hemp industry and therefore added CBD and THC testing to our scope. Our next step is to expand our service offerings to include agrochemical analysis of industrial hemp.”

Adam Gouker, general manager at A2LA, says accreditation plays a vital role in the cannabis industry and its regulatory requirements. “We congratulate Global Laboratory Services on becoming the first cannabis testing laboratory accredited in the state of North Carolina, specifically for industrial hemp,” says Gouker. “A2LA realizes the vital role that accreditation plays in the cannabis industry to support compliance with regulatory requirements, and we are thrilled to see that our service has been adopted in a new state. We look forward to our continued relationship with Global Laboratory Services in the provision of their accreditation needs.”

November 12, 2019

Doctors & Researchers Push Medical Efficacy Forward at 10th IACM

By Marguerite Arnold

1 Comment

It is easy to forget as one steps inside this world-class medical conference (held this year in Berlin), that cannabis is disputed as medicine anywhere in the world.

Inside a packed conference hall in an upscale hotel in East Berlin, international researchers presented evidence that when taken as a drug, this simple plant can make a world of difference to patients suffering from a range of illnesses.

There were also doctors who talked about prescribing this as medicine (even to children), with dramatic and affirming results (if not heart-warming pictures).

In sum, as always, the IACM is the best place to find facts if not evidence galore to convince even the most hard-boiled egghead that this drug works – and across a broad range of so far “other” drug-resistant medical conditions.

As a participant in the IACM said after the opening remarks on the very first morning, it is so easy to ask the question – “Why are doctors still so afraid of if not resistant to this drug?”

Medical efficacy is no longer an unanswered question…

For those seeking affirmation and evidence, this year’s IACM did not disappoint. There were presentations on the drug’s impact on neurological, oncological and inflammatory conditions that while not all new, are increasingly impactful in an aging planet.

A full house of attendees for the patients panel

But that is not all that was discussed. The broader implications of adding cannabis into skincare, diets and medicine chests were also presented – from cannabis’ impact on lowering obesity and positively affecting acne to impacting the opioid epidemic.

Also intriguing this year was a far-reaching study on how polluted the CBD supply chain is in Europe, even for non-medical and nutraceutical products. Not to mention a socio-political plea for legalization of personal use in South Africa.

And that was just the presentations from the stage and in the poster hall.

The conversations swirling around were just as interesting. Because of course, nobody at this three-day gathering, for all the normalization on display, did forget that this gathering of doctors, scientists, cannabis companies and patients is still an anomaly.

The fact is that there are still too few doctors prescribing. And too few trials. And too many fights over efficacy still in the room.

As Alice O’Leary Randall (wife and former partner in activism with her late husband, Professor Randall who initiated the medical efficacy fight in the U.S. in 1975 over glaucoma) said to Cannabis Industry Journal, “It is hard to believe that we are still fighting the same fights all over again.”

Another “AIDS” Crisis?

There is a more dramatic sense of urgency at the IACM than other conferences that focus just on the “business.” In part, this is because the conference is made up of not only doctors and researchers who fight to prescribe the drug or get trials funded, but also patients on the front lines in a country where the drug is supposed to be covered by health insurance.

Dr. Franjo Grotenhermen (seen on the table) and others during a panel discussion

The patient panel, as a result, was an international face of accusation: To national authorities who still refuse to mandate cannabinoid care – across Europe and beyond. To medical establishments who are not demanding cannabinoid treatment be made mandatory in hospitals and emergency rooms in every country in the EU and beyond. To individual doctors who refuse to come to such conferences, where, if they wanted to, could learn how to begin prescribing the “next penicillin.” To payers and insurers who are still too slow to pick up the message if not the tab.

Indeed, one of the best panels of the conference was a gaggle of doctors, led by Grotenhermen, who discussed the particulars of approaching a new drug – for the very first patient and first time.

Act Up, Speak Out, Silence Equals Death

As the conference wrapped up with its awards dinner, there was of course, a sense of needing to go home with not wanting this to end. For those in the thick of this multi-generational fight, there of course were words of encouragement to colleagues from the industry, internationally. But there was also a new sense of needing to up the pace, if not create faster change.

The battles are far from over – in fact, they are just beginning in many places. As one questioner said of a panel about halfway through the conference – “We need to pick up the fight the same way the AIDS community did on this drug.”

That remark perhaps means less today than it did 20 to 30 years ago when an embattled LGBTQ subculture was the organized point of the spear that fought the early state legalization battles as pioneers for a cause that sought equality as much as it sought a cure.

The plea did not fall on deaf ears.

In the midst of studies, statistics and scientific evidence, in other words, there was a new sense of a need for a renewed fight – and from the medical and scientific community as well as patients.

November 12, 2019

Risks of Bare Concrete Flooring in Cannabis Grow Rooms & Greenhouses

By Kendall Youngworth

3 Comments

With legalization rapidly increasing across states, the cannabis market is exploding. And with estimates of sales in the billions, it’s no surprise that greenhouses and grow rooms are emerging everywhere. As growers and extracting facilities continue to expand one important consideration that most tend to underestimate, is how flooring can impact both their production and product. Bare concrete is often a popular choice in cannabis facilities, as there are typically very minimal costs−if any at all−associated with preparing it for use. However, concrete floors can pose unique challenges when left untreated, which could inadvertently create unforeseen problems and unexpected costs.

Understanding the Risks of Bare Concrete Flooring

Whether a facility is growing or extracting, the proper flooring can play a critical role in helping maintain optimal safety and sanitation standards, while simultaneously contributing to production. That’s why its important for growers and extractors to know and understand the potential risks associated with bare concrete.

Concrete is porous: While concrete is a solid material, people may forget that it is porous. Unfortunately, these pores can absorb liquids and harbor small particles that spill on the floor. They create perfect hiding places for bacteria and other pathogens to proliferate. Pathogens can then contaminate product within the facility, causing a halt on production, and/or a potential product recall. This can incur unexpected costs associated with shutdown time and loss of product.

Concrete can be damp: When in a facility with an untreated concrete floor, at times the slab can feel slightly wet or damp to touch. This is due to moisture within the concrete that can eventually work its way up to the surface of the slab. When this happens, items that are placed on top of the floor can be damaged by trapped moisture above the slab and below the object. When this happens, if a product is not protected properly, it can be damaged.

Concrete is dark and unreflective: An untreated concrete slab can often make a room feel dark and it does not reflect lighting within the room. This can result in the need for extra lights and electricity to properly grow cannabis.

Concrete lacks texture: When working in areas where water and other liquids can fall to the ground and accumulate, flooring with traction can play a key role in helping aid against slip and fall incidents. Untreated concrete typically does not provide sufficient texture and can become very slippery when wet.

The Benefits of Bare Concrete Flooring

While the previously mentioned risks can be associated with bare concrete flooring, there is an upside to the situation! Concrete is the perfect substrate for adding a coating that is built to withstand the industry’s demands.

Non-porous flooring options are impervious in nature, helping to isolate contaminants on the surface, thus enabling proper cleanup and disposal.

With the application of a fluid-applied or resinous floor coating, the risks of bare concrete flooring can be mitigated. There are a variety of resin and fluid-based coating systems that can be applied, such as:

Epoxy and Urethane Systems
Urethane Mortar Systems
Decorative Quartz Systems
Decorative Flake Systems

These durable coatings have numerous benefits and can offer:

Protection against the proliferation bacteria and other pathogens: Unlike porous concrete, a smooth and virtually seamless floor coating eliminates the little crevices where pathogens can grow. This in turn helps aid against the growth of bacteria, keeping hygiene standards at the forefront and grow rooms in full operations.
Protection against moisture damage: As moisture within the concrete can move upward to the surface of the slab, there are moisture mitigation coating systems, that keep it trapped below the surface, thus helping toprotect items placed on the floor.
Brighter spaces and light reflection: Installing a floor coating that is light in color, such as white or light gray, can help brighten any space. The benefits of this are twofold: First, it can help with visibility, helping employees navigate the space safely. Secondly, light reflectivity of the flooring improves lighting efficiency, resulting in fewer light fixtures and smaller electric costs.
Texture options to help aid against slip and fall incidents: Floor coating systems can offer a variety of texture options−from light grit to heavy grit−depending on how much accumulated water and foot traffic the area receives. Without additional texture in wet areas, slip and fall incidents and injuries are inevitable.
A wide range of colors and decorative systems: These coating systems can be designed to match the aesthetics of the building or corporate colors. Some manufacturers even offer color matching upon request. When it comes to colors, the options are virtually endless.

Choosing the Right Flooring: Considering Bare Concrete

Choosing the right flooring for a cannabis greenhouse or processing facility requires important consideration as every grow room and greenhouse is different. Bare concrete is a popular flooring option for manufacturing and processing facilities across industries, however, as discussed, it can pose unique challenges due to its innate nature. That said, by taking the right steps to ensure that the concrete substrate is properly sealed, it can then be an effective and hygienic flooring option, offering high durability and a longer life cycle.