By Abraham Finberg, Simon Menkes, Rachel Wright 1 Comment
When Montana became a territory in 1864, its legislators chose as its motto the Spanish words “Oro Y Plata” which means “Gold and Silver.” Gold and silver discoveries brought people to the new territory in droves, and everyone expected to get rich.
Near the North entrance of Yellowstone in Park County, Montana
Nowadays, the newest gold rush to open up in Montana is the state’s adult use cannabis market, which began operation this past January 1, 2022. The Cannabis Control Division (CCD) of the Montana Department of Revenue expects total adult sales in 2022 to top $130M. With a population just over a million residents, that works out to about $120 per person, which would be more than California’s benchmark $111 per person. Montana’s cannabis industry is expecting exciting and enriching times ahead!
We advise our Montana clients to be cautious, however, and to keep an eye on the “cannabis tax ball.” Why? You can be killing it in sales but still get dragged under by a heavy tax burden, especially in adult use sales, or worse, not keep up with your tax obligations and run afoul of the Department of Revenue or Big Brother IRS.
Montana’s initial foray into cannabis began in 2004, when the state passed Initiative I-148, allowing patient cultivation and use of marijuana but left the legality of commercial sales ambiguous.1 The government reactionaries jumped in and used legislative action to tighten and limit that law.2 Then, in 2016, Montana voters legalized the medicinal sale of cannabis with I-182,3 and in 2021, adult use was legalized with I-190, allowing existing dispensaries to sell recreationally beginning January 1, 2022 in counties which voted yes on the initiative.4,5
From a federal taxation standpoint, of course, Montana’s cannabis operators are only allowed to deduct Cost of Goods Sold under Internal Revenue Code (IRC) 280E, and in general, the state of Montana’s tax code conforms with the Internal Revenue Code.6,7 However, the Montana Department of Revenue departed from the IRC in 2017 and allowed normal business deductions for licensed (legal) cannabis corporations.8 The Montana Department of Revenue also interpreted the law for pass-through entities and individuals with licensed cannabis operations to allow deductions of ordinary and necessary business expenses.9 This is what makes it possible to do business in cannabis in the state of Montana.
But what about Montana’s cannabis taxes? How big are they, and how do they compare with other states?
Montana charges a regular sales tax as well as either a 4% cannabis tax on medical sales or a 20% cannabis tax on adult use (recreational) sales.10 Some good news: wholesale sales are exempt from this tax.11 More good news: Both the retail tax and the regular sales tax are exempt from the taxable price i.e., the state does not charge “tax on tax.”12,13 However, be warned: be careful of offering discounts as it is assessed on the regular retail price rather than the actual discounted price.
Pray, a town near Livingston, Montana
Montana assesses the Cannabis Tax on the retail price and excludes discounts or even product given away.14 As of this writing, Park, Yellowstone and Missoula (medical only for Missoula) Counties have an additional 3% Local Option Tax based on the same state retail price definition with an exclusion for discounts or gifted products.15
So, with all these different taxes, is Montana actually a low tax state for cannabis? To begin with, the state is at least “in the ball game” by allowing the deduction of regular operating expenses on state income taxes. In addition, Montana has a relatively low tax which only applies at the retail level for medical sales and a relatively high tax on adult use. Adult use tends to be the vast majority of sales for dispensaries, so this does not bode well for retail cannabis operators.16
But before you throw in the towel and start looking to move to California (or Oklahoma, another cannabis-friendly state), a look at the whole Montana cannabis picture provides a rosier outlook. Montana income tax is relatively low, and since cultivators and manufacturers do not have to pay any cannabis excise taxes (especially as compared to California, with its cultivation tax and a functional 27% excise tax charged to retailers – a tax theoretically assessed to the consumer but in reality charged by a distributor to a retailer) or cultivation taxes on weight that enters the commercial market. All-in-all, Montana is actually a low-tax state for cannabis operators!
Disclaimer: This article has been prepared and published for informational purposes only and is not offered, nor should be construed, as legal advice.
Author’s experience with clients from California Oregon, Washington State and Nevada; states with both adult use and medical sales as of this writing. Montana does not have a commercial adult use program as of this writing.
Here we are entering a new year. Finally, many states in the United States have agreed to legalize adult-use cannabis either through medical or adult-use programs. In 2021, we saw Connecticut, New Mexico, New Jersey, New York and Virginia all legalize adult-use, bringing the total to 18 states that now allow adult-use and 36 for medical use.
State-led initiatives have been the backbone for this emerging industry. Yet, it’s the advocates who are moving the ball forwards through education, research and real-world case studies showing the benefits cannabis can have across many medical ailments. These grassroots efforts must stay vigilant and persist considering the slow progress on the Federal government level.
The Capitol Building, Washington D.C.
It isn’t so much a matter of “if” Washington will legalize cannabis, but a matter of “when.” There has been some progress with the Marijuana Opportunity Reinvestment and Expungement (MORE) Act to end the federal criminalization of cannabis. Also, the Secure and Fair Enforcement (SAFE) Banking Act, allowing cannabis businesses to work with traditional financial institutions was established and introduced. In 2021, the number of cannabis-focused advocacy groups on the Hill multiplied and large public companies like Amazon even turned their attention, and lobbying dollars, towards cannabis issues too.
Unfortunately, these two significant bills mentioned above are moving slowly through the political process and will take a concerted effort to get them across the finish line any time soon. It’s a delicate balancing act that will continue for the foreseeable future as we navigate our way through regulation and compliance issues.
I live in New York, and over the last several months watching counties and municipalities opt-in or opt-out for dispensaries and consumption sites has been fascinating. The Rockefeller Institute of Government has created a Marijuana Opt-Out Tracker. The data shows – 730 out of 1,521 municipalities opt-out of dispensaries and 830 out of 1,521 opt-out for consumption sites. You can see the opt-out number is relatively high. The insights show local municipalities are taking a wait-and-see approach, seeing how the initial rollout goes, and then opt-in later.
New York City Image: Rodrigo Paredes, Flickr
The data doesn’t correlate for me because if you look at a recent Gallup poll, 68% of adults in the United States approve of cannabis and 18% of Americans admit to using it, up from 10% in 2005.
There is still a disconnect that will require ongoing advocacy and education/research to present fact-based data that cannabis is safe to consume in moderation. Cannabis consumers should have the ability to purchase cannabis products from legal and regulated industry infrastructure in their town and not have to travel over an hour to get products from another location.
I have been in the cannabis industry since late 2017. Over the last four years, the industry has matured across many fronts, including new consumer products, processing technologies, dispensary formats and buying channels. However, I believe ongoing advancements from advocates, new manufacturing processes and technology platforms will lead the cannabis industry into a fully functional marketplace that is regulated and taxed relatively like any other industry.
As the adage goes, all good things are worth waiting for, and a high percentage of global adult individuals want to move forward with cannabis in their lives. Once we start categorizing cannabis as a wellness product and not a gateway drug, we will see both government and industry move quicker together.
Cannabis remains one of the fastest growing industries with no signs of slowing down. According to a recent article in Forbes Magazine, the legal cannabis market is poised to grow 20-30% per year to the tune of $50 billion by 2026.[1]With great opportunity comes numerous risks. Claims and lawsuits against cannabis businesses are increasing in frequency and magnitude. As an insurance broker who specializes in the cannabis industry and works with a wide variety of cannabis, hemp and CBD businesses in every state where cannabis laws are established, our recent analysis has unveiled the top five insurances your cannabis business needs in 2022.
General Liability
General liability is the most essential coverage your business needs to protect you from a variety of claims including personal injury, bodily harm, property damage and other situations that may arise including slander, libel, copyright infringement and more.
Since general liability is not always required to obtain a cannabis license, many businesses are tempted to forgo the expense. This is one of the biggest mistakes you can make as one single lawsuit has the potential to cripple your business. With a comprehensive, cannabis-specific general liability insurance policy in place, your insurance company, not you, will pay medical expenses and property damage claims from third parties, in addition to hefty legal fees and fines.
Property & Casualty Insurance
P&C insurance is an important part of your security and protection plan.
If you own a dispensary, grow operation, warehouse, testing facility or any other type of cannabis business with inventory, you need to protect your assets from potential loss or damage. Property & casualty (P&C) insurance safeguards your business against common and costly perils such as a fire, lightning, explosion/implosion, and even less common – but still possible – risks like riots, strikes and terrorism.
P&C insurance not only pays for damages to your business property resulting from a covered loss but it also covers the contents within your place of business, including office furniture, computers, inventory and other assets essential to your business operations. There are policies that will also provide the funds required to keep your business afloat until the damages from the loss are repaired. Any cannabis business with a physical property and location(s) should have a comprehensive property and casualty P&C policy in place.
Product Liability/Product Recall
Recently, we’ve seen a dramatic influx of product liability claims, and in particular, product recalls. Lawsuits have ranged from a single plaintiff seeking damages for personal injuries to class action lawsuits where a defective product is tied to an entire group of claimants.
Preventing contamination can save a business from extremely costly recalls. Having the right insurance can prevent a recall from becoming costly in the first place.
As a cannabis business owner, you can be sued for any damage resulting from products that cause harm to others, this includes false advertising, mislabeled or defective products. No matter where you are in the supply chain, your business could be held liable. The process of defending litigation or reaching a settlement agreement can completely drain a company’s resources. You’ll have to deal with regulatory compliance, producing and distributing product warnings, recalling products, claim investigation, product testing and additional risk assessment.
Product liability insurance is often overlooked, especially by small to mid-size businesses. However, your cannabis business needs this type of coverage if you sell any goods or products that end up in the hands of the public. In fact, your business may be contractually obligated to have product liability insurance. One such lawsuit is enough to fold a business due to costly legal fees and fines, as well reputation damage beyond repair.
Product liability insurance is designed to protect your cannabis company from claims that can happen anywhere along the supply chain, including product contamination, mislabeled products, false advertising or defective products. With proper coverage, your insurance company will pay for damages and legal expenses if you are sued, up to your policy limits. Your product liability policy will also cover any medical expenses for those who are harmed by your business. Making sure your insurance policy includes product liability insurance should be a top priority in 2022.
Cyber Defense/Data Breach Insurance
Cyber fraud and data breaches are two of the greatest risks facing cannabis companies in 2022. With so much cash pouring into the space, cannabis businesses of all sizes are bulls-eye targets for cybercriminals. Even the smallest of cannabis businesses are at risk of data breaches because they are part of a larger interconnected network of seed to sale vendors. These types of crimes can have detrimental effects on your business in numerous ways. In the case of a data breach resulting in the disclosure of a third party’s private information, the third party could sue your business. The SEC could also find your company negligent in cyber fraud cases and impose significant fines.
By forgoing cyber defense & data breach insurance, your business will be solely responsible for expensive legal bills, significant revenue losses and hefty fines and penalties from regulators. Cyber defense & data breach insurance is a must-have coverage in 2022, and beyond, to protect your business from cybercrimes.
Directors & Officers Insurance
If you are looking to secure venture capital or funding from investors in 2022, and/or attract and retain qualified leadership, you need directors & officers (D&O) Insurance. D&O protects corporate directors and officers, as well as their spouses and estates, from being personally liable in the event your company is sued by investors, employees, vendors, competitors, customers, or other parties, for actual or alleged wrongful acts in managing the company. In the event of litigation, your D&O insurance will cover legal fees, fines, settlements and other expensive costs.
D&O is often the most overlooked coverage because many cannabis businesses are independently run, and no one foresees the potential for operational failures and mismanagement. However, businesses with any sort of vision for growth should make D&O a top priority. It not only protects your current executives and board members but is critical in attracting leading talent in the space, as well as drawing in new investors to scale up your business. In fact, we’re seeing more prospective investors and board members requiring D&O insurance prior to engaging with a company to ensure they are fully protected in the event of litigation.
When it comes to mitigating risk in this business, the stakes are sky high. Cannabis companies that have not incorporated risk management into their business/operational plans will need to in 2022. It all boils down to the THREE P’s: being “Proactive, Prepared and Protected.”
Federal legalization of adult use cannabis is still out there as a potential, but ultimately, there are no guarantees that come with such a move. Further, even with legalization, the state-to-state variations in regulations for everything from cultivation standards to packaging and transportation will make marketing country-wide a difficult proposition for most cannabis businesses. The businesses that will grow and thrive will be ones that embrace trends and opportunities that are on the horizon for 2022 and beyond.
Economic resilience even in challenging times
Large scale companies are dealing with the issue of state-to-state differences in regulations by building branded verticals in each state: from growing to packaging, as well as building stores, in order to avoid the issue altogether. It’s an expensive proposition that is out of reach for the smaller entrepreneur, but it creates an almost regulation-proof setup for these organizations.
One interesting trend that would never have been as clear if the pandemic had not occurred is that cannabis is being generally viewed as a recession-proof industry. The pandemic has put the same types of constraints on consumer activity as a recession does and the results are clear: people are still interested, perhaps more so, in cannabis-related products and will choose to continue using them, even in times of restraint.
This economic resilience has also encouraged the growth of investment opportunities in the cannabis industry. ETFs (exchange-traded funds) that cover the industry are growing in number, as more cannabis related businesses grow in size and go public.
While banking through traditional institutions will continue to be difficult for cannabis businesses, pending federal legalization, there is a lot of money being funneled into the industry, through venture capital and angel investments. There is no question that it is still a growth industry now, and into the next decade.
Technological advancements
Now more than ever, cannabis has gone mainstream. The medical uses for it in terms of stress reduction, mental health and so on, have built up markets that might have otherwise looked to more traditional pharmaceutical options. There is an interesting portion of this new mainstream market that is interested in the therapeutic effects of cannabis but not in the traditional consumption method of smoking. In addition to wanting to avoid inhaling smoke, this same section of the market is acutely aware of what they put into their bodies and what impacts their choices have on the environment at large. The result? Organic, ethically sourced and developed cannabis products are becoming more and more the norm.
Some of the many infused products on the market today.
Products that include oils, tinctures, topicals and edibles are all within the scope of what the discerning cannabis consumer is looking for. The only downfall for many of these types of products, versus a smokable, is the effectiveness of the THC. For example, edibles can take upwards of an hour to produce any psychoactive effects. That limits the function of these types of products, so the next generation of these requires technological innovation to find a solution to that limitation, such as nano emulsions.
For example, we have innovated by leveraging technology that reduces THC particles to a nano size and creates a barrier around the particle so that they can be absorbed into the bloodstream, bypassing the neutralizing effects of the digestive system. This effectively creates edibles that produce a high that is comparable to what can be obtained by smoking a joint, therefore solving the issue that edibles have had in the past.
Multinational growth opportunities
With the inability to export from the US to other growing markets, there is the opportunity for cannabis companies to expand as multinationals. Growing and marketing cannabis products elsewhere and exporting to other countries that will accept the imports, is a big opportunity. To use an existing example, Uganda has established a government sponsored program to produce and export medical cannabis to Germany. This is an important change that has other countries in particular watching to see how this evolves. Certainly, from the point of view of local economic development, it’s too good an option to ignore.
We are partnering with a chain of medical clinics in Tanzania—“Your Local Clinic”—to provide local medical practitioners with the ability to prescribe medical cannabis, once legalization is realized. This is the first step in a longer term plan that will allow us to build up legal exports to Europe.
Export to the European Union (EU) is expected to grow dramatically by 2025, leaving plenty of expansion opportunities for US companies to take their growing practices, as well as available technology for irrigation, to the next level, via Africa and potentially even Latin America.
This is the second piece in a two-part conversation with the founders of Veda Scientific, CEO Leo Welder and CSO Aldwin M. Anterola, PhD. To read part one, click here.
In part one, we chatted about their backgrounds, their approach to cannabis testing, their role in the greater industry and how they came into the cannabis industry.
In part two, we’re going down a few cannabis chemistry rabbit holes and realizing that what we don’t know is a lot more than what we do know. Join us as we delve into the world of volatile compounds, winemaking, the tastes and smells of cannabis, chicken adobo and much more.
Aaron: Alright so you mentioned the GCxGC/MS and your more advanced terpene analysis. How do you envision that instrument and that data helping your customers and/or the industry?
Leo: Some of the things that we envision will help is a better understanding of what compounds and what ratios will lead to desirable outcomes, things like better effects, aroma and flavor. By better understanding these things it’ll help the industry create better products.
I have a personal connection to this. My wife has some insomnia and she’s always had to take various forms of OTC pharmaceuticals to help with sleep. She tried using a 1:1 vape pen and it was a miracle worker for her for several months. The local dispensary had a sale on it, and she bought some extra. Unfortunately, even though she used it the same way as before, she got very serious anxiety, which obviously didn’t help her sleep. Every time she used the vapes from this same batch, she felt the same extreme anxiety. Sadly, she now had a lot of this product that she couldn’t use because it kept her awake rather than helping her sleep, so she went back to trying other OTC solutions. That’s a problem for both consumers and the industry at large. If people find something that works and provides a desired effect, they need to be able to rely on that consistency every time they purchase the product, leading to similar outcomes and not exaggerating the problem. That’s why I think consistency is so important. We’re taking two steps forward and one back when we have inconsistent products. How do we really grow and expand the availability of cannabis if we lose trust from our consumer base? What a lab can do and what we can do is provide data to cultivators and manufacturers to create that consistency and ultimately allow the market to expand into other demographics that are currently wary and less tolerant of that variance.
Vials of cannabis samples being prepped for collaborative research with the CESC
On a similar note, we have been having a lot of discussions with the CESC [Clinical Endocannabinoid System Consortium] down in San Diego. They are an advanced cannabis research group that we have been working with for over a year. We’ve started looking at the idea of varietals. To be more specific, because I’m not a wine connoisseur, varietals are the pinot noirs, the cabernets and sauvignon blancs of the industry. In the cannabis industry, consumers have indica and sativa, though we still argue over what that concept really means, if anything. But for the sake of argument, let’s say we have this dichotomy to use as a foundational decision tool for consumers- call it the red and white wine of the cannabis industry. How inaccessible would wine be if we just had red or white? Imagine if you went to a dinner party, really liked the wine you were drinking, and the host could only tell you that it was a red wine. You can’t go to a wine store and expect to find something similar to that wine if the only information you have is “red.” At a minimum, you need a category. So that’s what varietals are, the categories. The data that we can produce could help people in the industry who identify and establish the varietals based on their expertise as connoisseurs and product experts to find what those differences are chemically. Similarly, we’re also looking at appellation designations in California. So, we want to help provide tools for farmers to identify unique characteristics in their flower that would give them ability to claim and prove appellation designation.
Aldwin: The GCxGC/MS allows us to find more things besides the typical terpene profile with 20 or 40 terpenes. It allows us to go beyond those terpenes. The issue sometimes is that with a typical one-dimensional GC method, sure you could probably separate and find more terpenes, but the one dimension is not enough to separate everything that coelutes. And it’s not just terpenes. Some terpenes coelute with one another and that’s why people can see this inconsistency. Especially if you use a detector like an FID, we can see the compound limonene on the chromatogram, but there’s another terpene in there that is unknown that coelutes with limonene. So, this instrument is helping us get past the coeluting issue and solve it so that we know what peaks represent what terpenes.
The other bonus with our GCxGC/MS is that the coeluting compounds that were masked behind other terpenes are now revealed. There is a second dimension in the chromatogram where we can now detect some compounds in cannabis that would be hiding behind these large peaks if it were just a one-dimensional GC. Besides terpenes, we’ve found esters, alkanes, fatty acids, ketones, alcohols and aldehydes, as well as thiols. The terpenes are so plentiful in cannabis that these other compounds present at lower levels cannot be seen with just one-dimensional GC. There are just so many compounds in cannabis that the ones in small amounts are often masked. My analogy to highlight the importance of these minor compounds is like a dish; I am from the Philippines and I like chicken adobo. My father does it differently from my mom and someone else will do it differently in a different region. The base of the sauce is vinegar and soy sauce, but some people will do it differently and maybe add some bay leaf, garlic, pepper, or a touch of another spice. It’s still chicken adobo, but it tastes differently. Just like in cannabis, where yes, you have the same amount of THC in two different plants, but it’s still giving you a different experience. Some people say it’s because of terpenes, which is true in a lot of cases, but there are a lot of other volatile compounds that would explain better why certain dishes taste different.
2-D chromatogram showing four peaks separated by the GCxGC. With a traditional 1-D chromatogram, these peaks would coelute and not separate.
Leo: There’s been some recent developments too here that show it’s very significant. It’s like the difference between bland and spicy. And it could be the thiol. We identified a thiol in cannabis at the same time as other scientists reported an article that just came out on this subject.
Aldwin: Thiols are sulfur containing compounds that produce very powerful odors, giving cannabis the skunky smell. Skunks also produce thiols. It is very potent; you only need a little bit. It turns out that yes, that paper described thiols and we also saw them in our GCxGC/MS. These are the kinds of things that the GCxGC can show you. Those very tiny amounts of compounds that can have a very powerful impact. That’s one that we know for sure is important because it’s not just us that’s finding out that GCxGC can detect this.
Not everything is about THC or the high amount of the compounds in the flower. This paper and our concurrent findings indicated that the skunkier smelling strains contained very small amounts of thiols and you can recognize their presence quite readily. It’s not a terpene, but it’s producing a distinct flavor and a powerful smell.
Aaron: Okay, so why is this useful? Why is it so important?
Leo: I would say two things in particular that we know of that are issues currently, both related to scents. We mentioned this earlier. We do know that farmers with breeding programs are trying to target particularly popular or attractive scent profiles, whether it be a gas or fruity aroma. Right now, when they get the flower tested and review the terpene profile, it isn’t enough information to help them identify what makes them chemically distinct. We hear time and again that farmers will say their terpene profile is not helpful in identifying specific scents and characteristics. They are looking for a fingerprint. They want to be able to identify a group of plants that have a similar smell and they want a fingerprint of that plant to test for. Otherwise, you have to sniff every plant and smell the ones that are most characteristic of what they’re targeting. For larger operations, walking through and smelling thousands of plants isn’t feasible.
Once we can identify that fingerprint, and we know which compounds in which ratios are creating the targeted aroma, we can run tests to help them find the best plants for breeding purposes. It’s about reproducibility and scalability.
Another value is helping people who are trying to categorize oils and strains into particular odor categories, similar to the varietals concept we’ve been talking about. Currently, we know that when manufacturers send multiple samples of oils with the same or similar scent to be tested, the results are coming back with significantly different terpene profiles. There is not enough data for them to chemically categorize products. It’s not that their categories are wrong, it’s just that the data is not available to help them find those boundaries.
Those are two issues that we know from conversations with customers that this particular piece of equipment can address.
Aldwin: Let’s start from what we find, meaning if you are using the GCxGC/MS, we are finding more terpenes that nobody else would be looking at. We have data that shows, for example, that certain standards are accounting for 60% or so of total terpene content. So a large percent is accounted for, but there is still quite a bit missing. For some strains there are terpenes that are not in common reference standards. Being able to know that and identify the reason why we have different terpenes in here unaccounted for is big. There are other things there beyond the standard terpenes.
Dr. Anterola working with the GCxGC/MS
What excites me sometimes is that I see some terpenes that are known to have some properties, either medical or antibacterial, etc. If you find that terpene looking beyond the list, you’ll find terpenes that are found in things like hardwood or perfumes, things that we don’t necessarily associate with the common cannabis terpenes. If you’re just looking for the limited number of terpenes, you are missing some things that you might discover or some things that might help explain results.
Leo: It’s also absolutely necessary for the medical side of things. Because of the federal limitations, cannabis hasn’t been researched nearly enough. We’re missing a lot of data on all of the active compounds in cannabis. We are finally starting to move into an era where that will soon be addressed. In order for certain medical studies to be successful, we need to have data showing what compounds are in what plants.
Drs. John Abrams and Jean Talleyrand of the CESC launched the Dosing Project in 2016. They have been studying the impact of cannabis flower for indications such as pain mitigation and sleep improvement, and now more recently mood, and appetite modulation. They categorize the THC & CBD content as well as flower aroma into 3 cannabinoid and 3 odor profiles. They are able to acquire quite a bit of data about how odor correlates with the outcomes. Because they were initially limited in terms of underlying natural product content data, they contacted us when they found out we acquired this equipment in 2020, and have stated that they are certain the data we will now be producing will take their research to the next level of understanding.
Aldwin: For quality control you are looking at specific things that would reflect properties in cannabis. There should be a 1:1 correspondence between properties observed and what we are measuring. The current assumption is that the terpenes we are looking at will tell us everything about how people would like it, with regards to flavor and smell preference. But we know for a fact that the limited terpenes most labs are measuring do not encapsulate everything. So, it is important for QC purposes to know for this particular strain or product, which everyone liked, what is it in there that makes everybody like it? If you just look at the typical terpene profile, you’ll find something close, but not exact. The GCxGC/MS shows us that maybe there’s something else that gives it a preferred property or a particular smell that we can explain and track. In one batch of flower, the consumer experiences it a certain way, and for another batch people experience it another way. We’d like to be able to understand what those differences are batch to batch so we can replicate the experience and figure out what’s in it that people like. That’s what I mean by consistency and quality control; the more you can measure, the more you can see.
Aldwin: Speaking to authenticity as well, in a breeding example, some growers will have this strain that they grew, or at least this is what they claim it to be, but what are the components that make those strains unique? The more analytes you can detect, the more you can authenticate the plant. Is this really OG Kush? Is this the same OG Kush that I’ve had before? Using the GCxGC/MS and comparing analytes, we can find authenticity in strains by finding all of the metabolites and analytes and comparing two strains. Of course, there is also adulteration- Some people will claim they have one strain that smells like blueberries, but we find a compound in it that comes from outside of cannabis, such as added terpenes. Proving that your cannabis is actually pure cannabis or proving that something has added terpenes is possible because we can see things in there that don’t come from cannabis. The GCxGC/MS can be used as a tool for proving authenticity or proving adulteration as well. If you want to trademark a particular strain, we can help with claiming intellectual property. For example, if you want to trademark, register or patent a new product, it will be good to have more data. More data allows for better description of your product and the ability to prove that it is yours.
Leo: One thing that I think is a very interesting use case is proving the appellations. It is our understanding that California rolled out a procedure for growers to claim an appellation, but with strict rules around it. Within those rules, they need to prove uniqueness of growing products in specific regions. The GCxGC/MS can help in proving uniqueness by growing two different strains in two different regions, mapping out the differences and seeing what makes a region’s cannabis unique. It’s valuable for growers in California, Oregon, Colorado to be able to prove how unique their products are. To prove the differences between cannabis grown in Northern California versus plants grown along the Central Coast. And of course, for people across the world to be able to really tell a story and prove what makes their cannabis different and special. To be able to authenticate and understand, we need to have more comprehensive data about properties in those strains. It could be terpenes, it could be esters or thiols. That’s what we’re excited about.
Aaron: From your perspective, what are some of the biggest challenges and opportunities ahead for the cannabis industry?
Aldwin: Getting ready for federal legalization is both a challenge and opportunity. A challenge because when it is federally legal, there will be more regulations and more regulators. It is also a challenge because there will be more businesses, more competition, that might get into the industry. It is opening up to other players, much bigger players. Big tobacco, mega labs and massive diagnostic testing companies might participate, which will be a challenge for us.
But it’s also an opportunity for us to serve more customers, to be more established at the federal level, to move to interstate commerce. The opportunity is to be ready here and now while other people are not here yet.
Another challenge and opportunity is education. Educating consumers and non-consumers. We have to realize and accept that cannabis is not for everybody, but everyone is a stakeholder, because they are our neighbors, parents or part of the medical establishment. It would be a disservice not to educate the non-consumers.
The medical establishment, they don’t have to be consumers but they need to know about cannabis. They don’t know as much as they should about cannabis and they need to know more, like how it could affect their patients for better or for worse, so they know how to help their patients better. There could be drug interactions that could affect the potency of other drugs. They need to know these things. Educating them about cannabis is a challenge. It’s also an opportunity for us to now come in and say that cannabis is here to stay and be consumed by more and more people, so we better know how to deal with it from a medical perspective.“This bucking bronco of a growth style will throw a lot of people off. We need to figure out what we can grab on to and ride out these waves.”
Law enforcement needs to be educated too. What THC level in the blood indicates impairment? It is still a challenge because we’re not there yet, we don’t have that answer quite yet. And it’s an opportunity to help educate and to find more answers for these stakeholders, so we can have regulations that make sense.
Leo: To Aldwin’s point, the biggest opportunity comes along with federal legalization as well as expanding the customer base beyond the traditional market. Since adult use was legalized in CA, we haven’t yet seen the significant expansion of the consumer population. We’re primarily seeing a legal serving of the market that already existed before legalization.
The reality is cannabis can be used in different ways than what we think of. We know it has medical benefits and we know it is enjoyed recreationally by people looking for high THC content and the highest high. But there is also this middle ground, much like the difference between drinking moonshine and having a glass of wine at dinner. The wine at dinner industry is much bigger than the mason jar moonshine industry. That’s really where the opportunity is. What’s the appeal to the broader market? That will be a big challenge, but it’s inevitable. It comes from everything we’ve talked about today, consistency in products, educating people about cannabis, normalizing it to a certain degree, varietals and appellations.
As an entrepreneur, I’m looking at this from a business perspective. Everyone talks about the hockey stick growth chart, but it is a very wavy hockey stick. I expect to see very significant growth in the industry for a while, but it will have a lot of peaks and valleys. It’ll essentially be whiplash. We are seeing this in California right now, with sky high prices in flower last year down to bottom of the barrel prices this year. We have to all figure out how to hang on. This bucking bronco of a growth style will throw a lot of people off. We need to figure out what we can grab on to and ride out these waves. The good ones will be fun and the bad ones will be painful and we know they are coming again and again and again. That’s the biggest challenge. People say ‘expect tomorrow to look a lot like today,’ but you really can’t expect tomorrow to look anything like today in the cannabis industry. Tomorrow will be totally different from today. We need to figure out, within all this chaos, what can we hang on to and keep riding the upward trajectory without getting thrown off the bronco.
Natural cannabinoid distillates and isolates are hydrophobic oils and solids, meaning that they do not mix well with water and are poorly absorbed in the human body after consumption. Cannabinoid oils can be formulated into emulsions to form a fine suspension in water to modulate bioavailability, stability and flavor.
Happy Chance is a cannabis infused products company offering better-for-you products to their customers. Happy Chance recently launched a low-glycemic index fruit bite line made from fresh ingredients, distinguishing them from traditional gummies. Splash Nano is a cannabis infused products ingredients company specializing in nano emulsions. Happy Chance utilizes Splash Nano technology in their fruit bites formulations.
We spoke with Katherine Knowlton, founder of Happy Chance, and Kalon Baird, co-founder and CTO of Splash Nano to learn more about their products and how they came to do business together. Prior to Happy Chance, Knowlton worked as a chef. Prior to Splash Nano, Baird was a consultant to the cannabis industry.
Aaron Green: Katherine, how did you get involved in the cannabis industry?
Katherine Knowlton, Founder of Happy Chance
Katherine Knowlton: I am a chef by trade. I went to culinary school in 2015. My partner also got into the cannabis space in 2017, which was right around the time when adult use cannabis became legal in California. As a chef, I am very passionate about cooking for optimal health and well-being. I noticed right away the abundance of candy- and sugar-laden products on the market. I set out to create a wellness driven product blending healthy, whole foods with a better value proposition, better-for-you and better-for-the-planet.
Green: Okay, great. Kalon, same question: how did you get involved in the cannabis industry?
Kalon Baird: I left a corporate job in 2011 and started cultivating in Southern California. I started to develop techniques for horticulture and developed a connection with the plant. I was a consultant for many years, and then decided to take a different path when legalization happened and got into the regulated manufacturing space. My goal was to bring new products to market to help satiate the demand for the infused category, the non-smokeable categories and to pursue niche product development.
Green: Tell me about your recent product development interests?
Kalon Baird, Co-Founder and CTO of Splash Nano
Baird: We’re interested in the research that comes out regarding cannabis minor constituents. We work with other research labs doing two-dimensional chromatography. We’re trying to figure out what compounds exist in the plant that aren’t just the major cannabinoids, and how to work with them in a pharmacological context so that they can be standardized and replicated at scale.
So, it’s not just about making a sugary THC gummy, it’s about seeing what minor cannabinoids, what minor terpenoids and what other unknown compounds can we explore, and then put back into products.
Green: That’s 2D GC-mass spec?
Baird: Yeah, it’s GC-by-GC and tandem mass spec. There are only a couple people that make that piece of equipment. The lab that we work with on that project is called Veda scientific. They’re one of the only people in the cannabis space that uses that machine. And they’re right in our backyard. The tech enables us to further quantify terpene profiles and helps to differentiate our products.
Green: I’d like to focus first on the Splash Nano technology and then we’ll dig into how you got to know each other, and then we’ll finish off with learning more about Happy Chance. So Kalon, tell me more about Splash Nano.
Baird: We employ nano emulsion technology. It’s essentially the science of making oil and water compatible and suspended in a way that reduces droplet size. With nano emulsions, you create an interfacial layer that enhances absorption and solves technical problems like being able to make cannabis oil compatible in water-based matrices, and sometimes in non-water-based matrices. The idea is that as we spread out the particles and as we change attributes of how they’re coated, they’re more bioavailable, and you get a more consistent and faster onset experience like you would in the pharmaceutical or alcohol industry. It’s bringing the industry standard up to the consumer package level and the pharmaceutical level, so that people aren’t waiting the typical hour-long timeframe to absorb that first dose.
Green: Tell me about your business model.
Baird: When we started out in 2018, we were going for a manufacturing license. In the meantime, we saw the drink category evolving and we wanted to be a part of that conversation in that ecosystem. We started developing our own nano emulsions that we knew would be useful when we got our license. We knew that we would sell the base material to co-packers who would put them into beverages. We didn’t want to co-pack the beverages ourselves. So, we developed a drink additive that was our proof of concept that had legs for the technology so that we could show people how to use it. That proof of concept spun off and became its own product and now it’s in the market under the brand name Splash Nano and comes in four distinct product SKUS using minor cannabinoids as differentiators.
The Splash Nano drink additive
Meanwhile, our bread-and-butter business was working with smaller brands, like Happy Chance that needed a path to market but couldn’t get the license or couldn’t go through that whole rigmarole of a two-year waiting period and a half a million dollars and all the other stuff. So, we started taking on all these smaller brands effectively licensing their brand IP and their ideas. In the process, we ended up learning a ton about product development and it became kind of a passion.
We have three core revenue streams. One of them is contract manufacturing, or private labeling. The other one is our own product Splash Nano which is a drink additive. And then the last is we open sourced the technology and sell that as a business-to-business platform so that people can infuse their own products with our fast-acting emulsions. We’re working on a licensing model that will allow other states to create that same consistency, where we send a black box model out to them, and then they infuse the cannabis and then turn that into a product.
Green: Moving on to Katherine here. Tell me about Happy Chance, and how you came up with the brand concept and the product idea.
Knowlton: Going back to what I touched on earlier, many traditional edibles in the space are brownies, cookies and candy type of products that do not contribute to wellness. I wanted to give the wellness driven consumer an option in cannabis. I wanted to create a powerhouse edible that was not only functional and complete but that elevated the consumer’s experience as a whole because of the ingredients we choose and the whole cannabis we source.
Some of the Happy Chance fruit bites
I’m someone who values better-for-you products that contribute to optimal health and well-being. So, I set out to make something. I didn’t really know what I wanted to make in the beginning. I bought a dehydrator and a food processor, and I started messing around with different applications in my kitchen. Over 100 variations later, the fruit bite was born.
The fruit bite is made with dates – a natural sugar that delivers nutritional power: a low glycemic index and high in vitamins, minerals and antioxidants. A sweet you can feel great about. And we use pumpkin seeds which have a lot of great protein. We are working with a company in California that takes imperfect fruits and vegetables and upcycles that back into the food supply chain. We utilize the whole fruits and vegetables as a dried intermediate, capturing all the flavor of nutrients. No added natural flavors and nothing from concentrate.
Green: How does the consistency differ from a gummy?
Knowlton: The consistency is similar to a Lara bar or an Rx bar. Essentially, it’s that same consistency in a bite form and so it’s very different than a gummy. It’s a low dose, low sugar alternative to the modern-day gummy.
Green: So, you’ve got this healthy concept for the fruit bite. You’re looking at suppliers and technologies to infuse the product. How did you finally decide on Splash Nano?
Knowlton: I watched my partner lose his company a few years ago to a larger vertically integrated company. The MSO promised the moon and the stars, and they got lost in the weeds of their eco-system, ultimately losing their company. That said, I was very sensitive when I first started on this journey. I even took on my own partners who didn’t work out either. I spoke with a lot of manufacturers in the selection process. Splash Nano was the tenth manufacturer I spoke with.
It was a very organic way of meeting. I am also based in Santa Barbara where Splash Nano is located. My partner’s brother shared an office space with Kalon, so we met through that connection. I learned right away that Splash was founded on wellness, much like Happy Chance. It was important to source clean cannabis, an aspect that Kalon and his team take pride in. We quickly discovered that Kalon’s Splash Nano technology was going to work in my product. Happy Chance immediately found a home, and it has been an organic evolution of realistic business and friendship.
Green: Kalon, I’d love to get your perspective as well. How do you think about partnering with brands?
Baird: Because of our contract manufacturing experience, we’ve been able to touch approximately 50 brands over our three-year tenure in this space. We’ve seen kind of everything from the multi-state operator to the owner-operator and everything in between. I developed a passion for working with these smaller brands for a lot of different reasons. This industry is built on the success of small mom and pops. Yes, the multi-state operators do have a place and they absolutely add a lot of value. But at the same time, they have their own natural challenges. You have essentially a culture of employees versus a business owner that’s making a lot of their own decisions.
There are advantages to somebody like Katherine, who’s in the trenches of business, and understands the ebbs and flows and ups and downs of this industry and be able to get through some of those challenges a lot more organically and a lot more sustainably. Katherine has such a deep pulse on her business and on her customer and on her own money. She tends to make a lot more calculated decisions, and I really appreciate that.
There’s a lot of waste that gets accumulated in this industry through packaging, through bad decisions, and over extensions of capital. It’s sad to watch and you see these people that have great potential, but it’s kind of lost in this sort of the framework of a large organization. Again, I like multi-state operators, they’re great. There’s nothing wrong with them, but it’s just a different flavor. I’m trying to highlight the fact that working with somebody that has a pulse on her business, and the passion for what she’s doing is wonderful. It’s not just about making money; it’s about adding value.
Green: Katherine, talk to me about sustainability and how you’ve woven that into your product.
Knowlton: We’re dedicated to supporting Product, People and Planet. That’s the whole mission and ethos of Happy Chance. As a chef, I wanted to be intentional about where our ingredients come from. We only source organic and upcycled ingredients – an essential recipe in sustaining a healthy, eco-friendly plant. Intention and integrity are always at the forefront of our products. We prioritize partnering with more transparent supply chains. We want to show the world how cannabis can promote positive lifestyle changes that support living more actively and consciously.
To reiterate, we are also not using anything from concentrate. We are using the entire strawberry, the entire blueberry and so it encapsulates all the flavor and all the nutrition that you would have from a fresh fruit into our products.
Green: How do you think about sustainability in product packaging?
Knowlton: As far as packaging goes in this industry, we’re very limited in what we can do. Compostable packaging isn’t really available, but we have partnered with a packaging company that definitely has mindfulness at the core of their mission. They have established their entire supply chain to ensure they are focusing on green practices and reducing waste each step of the way. Their energy efficient machinery creates a zero-waste manufacturing process to reduce their carbon footprint and they utilize soy and vegan inks to help reduce air pollution by minimizing toxic emissions in the air. My hope for the industry is that as it continues to evolve, we can become less wasteful as far as packaging goes.
Green: Rapid fire questions for both of you: What trends are you following in the industry right now?
Knowlton: As a chef and coming from the CPG world, I’m passionate about health and wellness. I think that it’s important to stay on trend with what we’re seeing in CPG. There’s definitely a market as far as people wanting these better-for-you products. I want to bring that into the cannabis space.
Baird: We’re seeing the inclusion of minor cannabinoids, terpenoids, standardized recipes and faster- or slower-acting delivery systems. So, I’m following trends in advanced drug delivery systems paired with minor cannabinoids.
Green: What are you most interested in learning about?
Knowlton: I’m most interested in how I can take what I’ve learned in the food space and help bring that into the world of cannabis through Happy Chance. Ultimately cannabis is plant medicine. So, how can we educate people that the ingredients we choose to make products should be good for us too. I think that there’s a lot that can be done with it from a from a health and wellness standpoint.
Baird: I’m interested in learning more about the analytical overlay between quantifying and standardizing entheogens and plant medicines like cannabis into the product development process in CPG. I’m thinking of ways to blend the two worlds of traditional science and New Age medicine.
Green: Awesome, that concludes the interview. Thank you both, Katherine and Kalon.
In a press release sent out today, Emerald Holding, Inc. announced they have completed their acquisition of MJBiz for $120 million.
Emerald Holding, Inc. is a large, publicly traded business-to-business events producer and content conglomerate with a number of publications and events in industries like design, equipment, retail, safety & security and technology. Founded in 2013, the company has become a leading operator of B2B trade shows in the US, with their largest shareholder being the Toronto-based investment group called Onex Corporation.
MJBiz, founded in 2011, is known in the cannabis industry for their content platform, MJBizDaily, as well as the world’s largest cannabis trade show, MJBizCon.
As part of the agreement to acquire MJBiz, Emerald Holding will retain senior management in the company for day-to-day operations. The agreement also includes the potential for future payments, depending on the company’s performance through the end of this year.
Hervé Sedky, President and CEO of Emerald Holding, says they have been big fans of the MJBiz brand for a long time. “We have long admired MJBiz’s sterling reputation for being the most trusted event and content producer serving the business side of the cannabis and hemp industries and their respective participants,” says Sedky. “This is a transformational acquisition for Emerald as it represents an important next step in the implementation of our strategic initiatives and underscores our commitment to evolve and grow our customers’ businesses 365 days a year.”
The two founders of MJBiz, Cassandra Farrington and Anne Holland, will stay on with the company in a consulting capacity. According to Farrington, who is also chair of the MJBiz Board, says they went with Emerald because they value the company’s uniqueness. “Our organization has experienced massive growth since its inception, initially as a how-to resource to help dispensary owners run their businesses better, into our position today as the leading commercial resource for the cannabis sector,” says Farrington. “Integrating with a larger organization provides the additional resources and channels to unlock the next phase of MJBiz’s growth and is the right next step in our evolution as a business.”
Aurora Cannabis Inc. sent out a press release today announcing that they have completed their largest shipment of cannabis to Israel yet. The Canadian company says the shipment of medical cannabis is worth roughly C$10 million, making it their largest shipment and possibly the largest cannabis import in Israel’s history.
Aurora is working on building their market presence in Israel as they continue to focus on international expansion. They claim that they are the leading Canadian licensed producer in global medical cannabis by revenue.
Miguel Martin, CEO of Aurora Cannabis Inc., says they are watching the world slowly begin to embrace cannabis just a bit more. “It’s an exciting time for the global cannabis industry, as we’re seeing growing acceptance and thoughtful regulation of both medical and adult-use cannabis across Europe and in key markets like Israel,” says Martin. “With strong local relationships, as well as support from our patients and consumers, we look forward to continuing to expand our international business to complement our total cannabis portfolio.”
Aurora also announced a joint venture in The Netherlands back in November of 2021, joining their regulated adult-use pilot program. The shipment of medical cannabis to Israel was delivered in December and will be posted in their second quarter revenue of 2022.
As of now, there are only two cannabis testing labs in Connecticut. Last year, regulators in the state approved a request from AltaSci Labs to raise the testing limits for yeast and mold at their lab from 10,000 colony forming units per gram (cfu/g) up to 1 million. The other lab, Northeast Laboratories, has kept their limits at 10,000 cfu/g.
Connecticut state flag
According to CTInsider.com, that request was approved privately and unannounced and patients were notified via email of the change. Ginny Monk at CTInsider says patients enrolled in Connecticut’s medical cannabis program have been outspoken over safety concerns, a lack of transparency and little voice in the decision-making process.
Connecticut has a small medical cannabis market with roughly 54,000 patients in the program and they are in the midst of readying the launch of their adult-use market.
A yeast and mold test showing colony forming units
Following public outcry regarding the change at the recent Social Equity Council meeting, state regulators have proposed a change to microbial testing regulations. The new rule will set the limit at 100,000 cfu/g for yeast and mold and requires testing for specific forms of Aspergillus, a more harmful type of mold.
Kaitlyn Kraddelt, spokeswoman for Connecticut’s Department of Consumer Protection, the agency in charge of testing regulations for the state’s cannabis program, told CTInsider.com that they involved several microbiologists to develop the new rule. “These new standards, which were drafted in consultation with several microbiologists, will prohibit specific types of yeast and mold in cannabis flower that may cause injury when inhaled and allow 10^5 cfu/g of colony forming units that have no demonstrated injurious impact on human health,” says Krasselt.
The rule change is now undergoing a public comment period, after which the Attorney General’s office will get a review period. If approved, it’ll head to the legislature, where a committee has 45 days to act on it.
Leo Welder, CEO of Veda Scientific, founded the business with Aldwin M. Anterola, PhD in July of 2019. A serial entrepreneur with experience in a variety of markets, he came to the industry with an intrigue for cannabis testing and analysis. After teaming up with Dr. Anterola, co-founder and chief science officer at Veda Scientific, they came together with the purpose of unlocking possibilities in cannabis. From the beginning, they set out with a heavy scientific interest in furthering the industry from a perspective of innovation and research.
Through discussing their clients’ needs and understanding their complex problems, the two realized they wanted to start a lab that goes well beyond the normal regulatory compliance testing. Innovation in cannabis looks like a lot of things: new formulations for infused products, better designs for vaping technology or new blends of genetics creating unique strains, to name a few. For the folks at Veda Scientific, innovation is about rigorous and concentrated research and development testing.
With the help of some very sophisticated analytical chemistry instruments, their team is working on better understanding how volatile compounds play a part in the chemometrics of cannabis. From varietals and appellations to skunky smells, their research in the chemistry of cannabis is astounding – and they’ve only begun to scratch the surface.
In this two-part series, we discuss their approach to cannabis testing, their role in the greater industry as a whole and we go down a few cannabis chemistry rabbit holes and find out that what we don’t know is a lot more than what we do know. In part one, we get into their backgrounds, how they came into the cannabis industry and how they are carving out their niche. Stay tuned for part two next week where we delve deep into the world of volatile compounds, winemaking, the tastes and smells of cannabis and chicken adobo.
Aaron G. Biros: Tell me about how you and your team came to launch Veda, how you entered the cannabis space and what Veda’s approach is to the role of testing labs in the broader cannabis industry.
Leo Welder, CEO of Veda Scientific
Leo Welder: I’m an entrepreneur. This is my third significant venture in the last fifteen years or so. So, I was intrigued by cannabis legalization broadly, because it is such a unique time in our history. I was always interested in participating in the industry in some way, but I didn’t see where would be a good fit for me. I used to meet monthly with a group of friends and fellow entrepreneurs for dinner and discussions and one member started working on the software side of the industry. He mentioned the testing element of cannabis in one of our meetings. I latched on to that and was intrigued by the concept of testing cannabis. I began to research it and found the role that testing plays in the cannabis industry is really significant. I found out that regulators rely pretty heavily on labs to make sure that products are safe, labels are accurate and that consumers have some protections. So, I thought that this is a space that I thought I could really find a calling in.
So, from that point I knew I needed to find a subject matter expert, because I am not one. I have business skills and experience in some technical fields but I am not a cannabis testing expert by any means. So, with that I started to look at a few different markets that I thought may have opportunity for a new lab, and I came across Aldwin’s business; he had a cannabis testing lab in Illinois at that time. I reached out to him, talked to him about my vision for the space and his thoughts and his vision and we really started to come together. From there, we researched various markets and ultimately chose to approach Santa Barbara County as our first foray together into the cannabis testing market.
Aldwin M. Anterola: As Leo mentioned, he was looking for a subject matter expert and I am very much interested in plant biochemistry. Which means I like to study how plants make these compounds that are very useful to us. For my PhD [in plant physiology], I was studying how cell cultures of loblolly pine produce lignin. Our lab was interested in how pine trees produce lignin, which is what makes up wood. Wood comes from phenolic compounds. You’ve probably heard of antioxidants and flavonoids – those are phenolic compounds. After my PhD, I wanted to do something different so I decided to work with terpenes.
I picked a very important terpene in our field, an anti-cancer compound called Taxol, produced from the bark of the yew tree. You have to cut trees to harvest it. We have ways of synthesizing it now. But at that time, we were trying to figure out how the tree produces that terpene. Of course, I’m interested in any compound that plants make. My interest in terpenes led me to cannabinoids which turn out to be terpenophenolics, thus combining the two interests in my professional field.
Aldwin M. Anterola, PhD, Co-Founder and Chief Science Officer at Veda Scientific,
So that’s the scientific and intellectual side of why I became interested in cannabis, but practically speaking I got into cannabis because of a consulting offer. A company was applying for a cultivation license, wanted to have a laboratory component of their business in their application, and hired me to write that part of their application. I was very familiar with HPLC, and had a GC/MS in the lab. I also have a background in microbiology and molecular biology so I can cover every test required at that time, and I knew I could research the other analytical techniques if necessary.
So, they did not get the license, but I figured I’d take what I wrote, once I received permission, and set up an independent laboratory together. But it’s hard to run a lab and be a professor at the same time. Also, the busines side of running a lab is something that I am not an expert in. Fortunately, Leo found me. Before that, I really got excited about this new industry. The concept of cannabis being now accessible to more people is so interesting to me because of how new everything is. I wanted to be involved in an industry like this and help in making it safe while satisfying my curiosity in this new field of research. As a scientist, those are the things that excite us: the things we didn’t have access to, we can now do. It opens up a whole new room that we want to unlock. It was my intellectual curiosity that really drove me. This opened up new research avenues for me as well as other ventures if you will. How can I be more involved? I thought to myself.
SIU boasts an impressive cannabis program, thanks largely to Dr. Anterola’s work there.
Back in 2014, I introduced cannabis research to our university [Southern Illinois University] and set up an industrial hemp program, which was DEA-licensed I gathered faculty that would be interested in studying hemp and cannabis and we now have a whole cannabis science center at the university. I teach a course in cannabis biology and because I also teach medical botany to undergraduate students, I was able to introduce [premed] students to the endocannabinoid system. Anyway, I can go on and on.
Outside of that I became involved with the AOAC and ASTM, and became a qualified assessor for ISO 17025:2017. I have been a member of the American Chemical Society since 2000 but there were no cannabis related activities there yet until relatively recently. But when they had the new cannabis chemistry subdivision, I am happy to participate in there as well . There are many avenues that I took to begin dabbling with cannabis, be it research, nonprofits, teaching, testing and more. Cannabis has basically infiltrated all areas of what I do as an academic.
Leo: I read his resume and I was like this is the guy! So back to your question, what’s Veda’s role as a testing lab in this space? What are we trying to build? We spent a lot of time trying to figure out what we wanted to be in this space. We came to understand that labs are not the tip of the spear for the market; that would be the growers, the retailers and the processors. We are a support, a service. We see ourselves as a humble, but competent guide. We provide the data for the tip of the spear, the people pushing the industry forward with support, data and the services to make sure they have the tools they need to build these great companies and great products with good cultivation practices and more, leading everyone to the next level of the cannabis industry. Our job is to support innovation, to provide quality compliance testing, to of course ensure safety, while also providing great R&D to these innovative companies.
Aldwin: I’d like to add a bit to that thought. Okay so that’s who we are, but what are we not? Because as Leo said I had a testing lab before we met [Advanced Herbal Analytics]. From there, I approach it as safety testing, making sure that before it gets to the end consumer, we are sort of like gate keepers keeping consumers safe. That’s one side to it, but we are not the people who are trying to make sure that none of the products get to the market. For some, that’s how we’re treated as.
People often look at testing labs like the police. We are not the people trying to limit products to market. Our approach is not to find faults. There is another way of being a testing lab that is less about finding faults in products and more about finding uniqueness. What makes your product different? With this new approach, we are much more focused on helping the best products make it to the shelves.
Aaron: Given that all state licensed labs have to provide the same tests as the other labs in that state, how does Veda differentiate itself?
Leo: Location was the first thing. We picked Santa Barbara County intentionally. We knew that some of the biggest operators, some of the most forward-thinking innovators were setting up shop here. Looking down the road, not just this year or next year but very long term, we wanted to start building a great, sustainable company. We wanted to build a brand that those kinds of companies would be receptive to. Building better and greater products. There’s one other lab in the county and that’s it. Whereas there are clusters of labs in other parts of the state. Part of the draw to Santa Barbara for us was that it is such a small, tight-knit community. We have worked very hard to build relationships in our community and to understand their challenges, helping them however we can.
Location and relationships. Getting to know the challenges that different size customers face, be it our greenhouse customers versus outdoor customers, or large-scale operations versus smaller manufacturing operations, the challenges are all different. Some people care about turnaround times, some more about R&D. If we understand our client’s problems, then we can provide better service. We see ourselves as problem solvers. We lean heavily on our technical team members like Aldwin, who not only have tremendous amounts of experience and education, but also great networks to utilize when a customer needs help, even when it falls outside of our local expertise.
The GCxGC/MS instrument, used for Veda’s advanced R&D testing
Last but certainly not least is the advanced R&D testing that we do. When we first started, we started talking to farmers and manufacturers trying to understand their challenges. What data were they not getting? How would a testing lab better serve them? So, we started investing strategically in certain instruments that would allow us to better serve them. We’ll get into this later as well, but we invested in a GCxGC/MS, which allows us to get more visibility into things beyond the typical panels, like more terpenes and other volatile compounds including thiols and esters. We did that because we knew there is value in that. The data our customers were getting prior just wasn’t enough to put together really great breeding programs or to manufacture really consistent products, you know, to move toward that next level of innovation in the industry.
Aldwin: Leo mentioned advanced R&D and it’s basically the same approach that I mentioned before. It’s not just telling you what you can and cannot do. It’s about asking them what do you want to do and what do you want from a lab? If we have a problem, let’s see if we can solve it. That’s how the GCxGC/MS came into play because we knew there was a need to test for many terpenes and other volatile compounds. The common complaint we received was why two terpene profiles differ so much from each other, even from the same genetics.
This is something that would actually give the customer, the cultivator or the manufacturer: data about their product that they can actually use. For consistency, for better marketing and other reasons. We are trying to help them answer the questions of ‘how can I make my product better?’
You know, for example, clients would tell us they want something that has a specific taste or smells a certain way. Nobody is telling them what makes the flavor or smell. There is a need there that we can fill. We are trying to provide data that they, the customers, need so that they can improve their breeding programs or their formulations. Data they can use, not just data they need in order to comply with regulations. They would ask us what we can do. We listen to our customers and we try and help as best we can. We don’t know every answer. We are discovering there is a lot more to terpenes than what you can find on a traditional one dimensional gas chromatogram. Some of the terpene data that our clients had previously is not really actionable data, which is where the GCxGC/MS is helping us.
In part two, we delve deep into the world of volatile compounds, winemaking, the tastes and smells of cannabis and chicken adobo. Click here to read part two.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
From a federal taxation standpoint, of course, Montana’s cannabis operators are only allowed to deduct Cost of Goods Sold under Internal Revenue Code (IRC) 280E, and in general, the state of Montana’s tax code conforms with the Internal Revenue Code.6,7 However, the Montana Department of Revenue departed from the IRC in 2017 and allowed normal business deductions for licensed (legal) cannabis corporations.8 The Montana Department of Revenue also interpreted the law for pass-through entities and individuals with licensed cannabis operations to allow deductions of ordinary and necessary business expenses.9 This is what makes it possible to do business in cannabis in the state of Montana.
