Illinois lawmakers came one step closer to legalizing adult use cannabis this week. The Illinois Senate voted 38-17 to pass HB 1438, which is now headed to the House for a vote. Sponsors of the bill, Senator Heather Steans (Chicago-D) and Representative Kelly Cassidy (Chicago-D), along with Governor J.B. Pritzker, have been viewed as the architects of this piece of legislation.
Illinois Governor J.B. Pritzker
This is not the first time that Democrats in the Illinois legislature have attempted to legalize adult use cannabis. Back in 2017, state Representative Kelly Cassidy and state Senator Heather Steans, the two lawmakers sponsoring this bill, sponsored a legalization bill that failed to garner support.
It is clear that Illinois is excited about cannabis, including the less-than-0.3%-THC variety, or legal hemp under the Farm Bill. Within two days of announcing the opening of license applications for growing hemp, the Illinois Department of Agriculture received roughly 350 applications.
Regarding the bill that just cleared the Senate, one particularly contentious issue raised was the allowance for “home grow.” The Senate approved the bill after a provision was added allowing just medical cannabis patients to grow their own, not everyone.
If this bill manages to pass through the House, Governor Pritzker is expected to sign the bill immediately. The bill would legalize and regulate sales of cannabis and cannabis products on January 1, 2020.
Good news came to patients using medical cannabis in Arizona earlier this week: Lawmakers in Arizona unanimously passed SB1494 through the state’s House and Senate, the bill requiring mandatory lab testing for medical cannabis products. Arizona Governor Doug Ducey is expected to sign the bill and has ten days to do so.
Arizona Governor Doug Ducey
When Governor Ducey signs the bill into law it will mark the first time since the state legalized medical cannabis in 2011 that a measure to protect patient safety via lab testing will be implemented. According to the bill, beginning November 1, 2020, all cannabis products shall be tested prior to sales “to determine unsafe levels of microbial contamination, heavy metals, pesticides, herbicides, fungicides, growth regulators and residual solvents and confirm the potency of the marijuana to be dispensed,” (Page 6, Section 36-2803).
The bill requires dispensaries to provide test results to patients immediately upon request. Dispensaries need to display a sign notifying patients of their right to see “certified independent third-party laboratory test results for marijuana and marijuana products for medical use,” according to the text of the bill (Page 7, Section 36-2803.01).“There will have to be some serious planning, but other states have achieved this and we can too.”
Under the new bill, the Arizona Department of Health Services will adopt rules to certify and regulate labs, establishing requirements like health and safety protocols, mandatory quality assurance program and standards, chain of custody and sampling policies, adequate records, accreditation, proficiency testing, among other requirements (Page 6-7, Section 36-2803).
Ryan Treacy, co-founder of the Arizona Cannabis Laboratory Association (ACLA) and CEO/Founder of C4 Laboratories, says this is a major turning point for Arizona’s cannabis industry. “We have been devoid of regulations with regard to testing the entirety of the program since it was legalized; This will be a significant change,” says Treacy. “Now patients can make sure they are getting a safe and clean product and getting exactly what they paid for.”
For those in the know when it comes to cannabis testing in the United States, the new requirements will look very similar to other states with testing requirements. One particularly unique aspect of the new program, however, is the establishment of a “Medical Marijuana Testing Advisory Council,” made up of stakeholders representing different interests in Arizona’s cannabis industry. Members of the council will include representatives from dispensaries, labs, cultivators, concentrate producers, edibles producers, as well as registered patients, caregivers, a representative from the Arizona Department of Public Safety, a licensed health care provider and “any other members deemed necessary by the director,” reads the text of the bill (page 16, Section 36-2821).
Ryan Tracy, co-founder of the ACLA and founder/CEO at C4 Labs.
“Other states like California have complained about detection limits, while Arizona is taking a unique approach with an advisory council with stakeholders in the cannabis industry,” says Treacy. “So that when the Department of Health Services promulgates rules, they are taking into account the challenges in the cannabis industry specifically. We have a chance to do this right and avoid pitfalls we’ve seen in other states.”
One problem worth mentioning for Arizona’s cannabis industry: Dispensaries have not been required to test products for patients since medical cannabis was legalized back in 2011. That means many producers could be very used to operating procedures that don’t account for lab testing. With mandatory lab testing, some producers may be behind the curve when it comes to mitigating contamination.
According to Treacy, this could disrupt the supply chain a little bit. “When testing becomes mandatory in November 2020, dispensaries will need a full panel of tests performed on their samples,” says Treacy. “With the entire market now required to complete a full panel in depth analysis on each product, product testing will become a more time-consuming stop in the supply chain. So companies will need to work that into their plan to meet regulation requirements to prevent a bottleneck and maintain patients’ access to their cannabis medicine.”
Arizona has a chance to prevent that type of bottleneck seen in states that implemented testing requirements, like California for example. “When you have a habitual history of not testing products, it can be very hard to change, which adds to Arizona’s challenges,” says Treacy. “We need to make sure this does not affect access for patients and the ability of the industry to continue to flourish and grow.”
While Treacy thinks the transition will be difficult for some, it’s absolutely necessary for Arizona’s patients to access clean and safe medicine. “There will have to be some serious planning, but other states have achieved this and we can too.”
Products using hemp-derived cannabidiol (CBD) designed for pets is not a new concept; Companies have been marketing CBD pet products for quite some time now, making their way into pet stores across the United States. Some pet owners have embraced the trend, using CBD oil to calm pets down, help alleviate joint pain as well as inflammation, while others are understandingly skeptical when it comes to using novel remedies for their furry friends.
Researchers at the University of Pennsylvania’s School of Veterinary Medicine hope to find some answers to those questions, particularly regarding the efficacy of using CBD remedies for dogs. According to a press release, a team of researchers at University of Pennsylvania’s Veterinary Clinical Investigations Center will perform the first major double-blind clinical trial to study the effectiveness of CBD in treating joint immobility in dogs. The trial will be led by principal investigator Dr. Kimberly Agnello.
According to the press release, this is the largest trial for cannabinoid therapy in pets so far. The trial will include use of the CBD-infused pet product, Therabis’ “Mobility.” Therabis is a subsidiary of Dixie Brands, Inc., a large cannabis infused products company in markets across the United States. Here are some of the details on the clinical trial, shared through the press release:
Dogs known to be suffering from inflammation secondary to osteoarthritis will be studied to determine whether those who receive the Therabis supplement achieve better outcomes than untreated dogs. One group of dogs will receive the formula for a proprietary veterinarian-specific formula Therabis product; a second group will receive Cannabidiol alone which previous studies have shown may have benefit in osteoarthritic dogs; a control group will receive a placebo. Study designers are targeting inclusion of up to 20 dogs in each group. The design of this study will provide valuable data defining the synergistic potential of the additional ingredients in the Therabis formula.
According to Dr. Stephen M. Katz, co-founder of Therabis, they think the data from the trials will show a positive outcome for dogs using their products. “We are honored to have a Therabis product selected by the world-renowned experts at Penn Vet for their first major study of the effects of natural hemp oil to reduce joint pain in dogs,” Says Katz. “Our experience in my clinic has shown that cannabidiol (CBD) is an effective treatment in reducing inflammatory response. We have a passion for improving dogs’ quality of life, and we look forward to learning all we can about therapeutic methods to achieve this.”
The results from this clinical trial, to be published in an academic journal upon conclusion of the study, should be of great interest to the hemp industry. Brightfield Group estimates that the CBD-infused pet products market is a $199 million industry, expected to grow up to $1.16 billion by 2020.
CBD-infused coffee? CBD-infused chewing gum? Many think cannabis and its derivatives are the next big wellness craze that will make the demand for flax, fish oil and turmeric combined seem meager. The food and drink industries are cautiously exploring the cannabis market, trying to determine the optimal timing to introduce their own product lines.
The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.
The cannabis plant produces chemicals known as cannabinoids, one of which is cannabidiol, or CBD.When the Agriculture Improvement Act of 2018 (also known as the Farm Bill) passed, the food and drink industries jumped into the hemp-derived CBD world with both feet because the Farm Bill lifted the federal ban on hemp production, which previously classified hemp as a controlled substance akin to heroin. Lifting the ban led to an explosion in the number of CBD products hitting the market around the country. However, repeated and recent actions by the U.S. Food and Drug Administration (FDA) provide clear warning signs that the legal pitfalls surrounding CBD in food and drinks are not yet resolved.
CBD is marketed as a featured ingredient for a wide variety of products ranging from pain relievers, to protein bars beverages and supplements. Both CVS and Walgreens have announced plans to carry CBD products in their stores. However, despite the money pouring into CBD products, federal agencies are not relinquishing their controls.
In the Farm Bill, the FDA retained authority to regulate products containing cannabis or derivative products. The FDA has regulatory authority over foods (including dietary supplements and food additives), drugs (prescription and non-prescription), cosmetics, veterinary products and tobacco products, among other categories. Therefore, vendors of virtually all products containing CBD are regulated by the FDA.
It is important to note that the FDA does not view CBD derived from hemp differently than any other CBD despite the fact that it is non-psychoactive. CBD is an active ingredient in at least one FDA-approved prescription drug—Epidiolex. Therefore, under the logic of the Federal Food, Drug & Cosmetic Act (FDCA), CBD is a drug. If a substance has been “approved” by the FDA as an active ingredient in a drug product, it is per se excluded from being defined as a “dietary supplement” under sections 201(ff)(3)(B)(i) and (ii) of the FDCA and it cannot be included as an ingredient in food.
It is highly unusual that CBD has been able to proliferate in the marketplace given the FDA’s technical legal position on it. FDA regulations on drugs are much more stringent than for food or dietary supplements. Generally, the FDA’s position on CBD in food and beverages is that it is unlawful to engage in interstate commerce with products containing CBD. The given reason is that the Federal Food, Drug, and Cosmetic Act prohibits the introduction of a food product into interstate commerce that contains an active ingredient in an approved drug. While arguments against this position exist, they have not carried the day, yet.
An example of a warning letter the FDA sent to a CBD products company making health claims
In March 2019, FDA Commissioner Scott Gottlieb announced he would be resigning on April 5, 2019, but he sent clear warning signals to the CBD industry prior to his departure. In early April, the FDA cracked down on websites making “unfounded, egregious” claims about their CBD infused products. The FDA sent warning letters to three companies who made claims about their CBD products including that their CBD products stop cancer cell growth, slow Alzheimer’s progression, and treat heroin withdrawal symptoms. Commissioner Gottlieb issued a statement that he believed that these were egregious, over-the-line claims and deceptive marketing that the FDA would not tolerate.
The FDA also announced in early April that it will hold a public hearing on May 31, 2019, to obtain scientific data and information related to safety concerns, marketing and labeling cannabis and cannabis-derived compounds including CBD. The FDA expressed interest in hearing whether drug companies would still be motivated to develop drugs with CBD and other compounds if their use in food and beverages became more widespread. The FDA also announced plans for an internal working group to review potential pathways for legal marketing of CBD foods and dietary supplements. Of particular concern to the FDA is online retail products available nationwide such as oil drops, capsules, teas, topical lotions and creams.
Still, some states are trying to take matters into their own hands. For example, the California State Assembly recently passed bill A.B. 228 that permits the inclusion of CBD in food and beverages. Colorado has already passed a similar bill. Other states such as Ohio and cities such as New York City have gone the other way, prohibiting CBD from being added to food or beverages.
The May 31 FDA hearing is an opportunity for interested parties to give feedback and help focus where the FDA should be creating clear industry standards and guidance. In the meantime, the industry should continue to expect warning letters from the FDA as well as possible state-level scrutiny. Companies would be wise to proactively review their labels and promotional practices in order to mitigate the risk of forthcoming actions and engage in the FDA’s provided avenues for industry input. Companies must also look to the laws of the states and even to the counties where they are selling their products.
As of today, Arizona is the only state in the country that has legalized medical cannabis but does not require producers to test their medical cannabis. States throughout the country that legalize medical cannabis routinely implement regulations that require third-party, independent lab testing to protect patient and consumer safety. Arizona legalized medical cannabis for a number of qualifying conditions back in 2011, but still has no measure like other states to protect patient safety.
Lawmakers in Arizona now have the opportunity to change that with SB1494, which passed unanimously through the state’s Senate back in March of 2019. According to the Arizona Cannabis Laboratory Association (ACLA), the bill awaits action in the House of Representatives. The ACLA says in a press release that “supporters of the bill are calling on lawmakers to move on a bill that unanimously passed in the Senate earlier this year.” The bill would require producers to use independent, third-party labs to test cannabis for things like harmful toxins and molds.
Ryan Tracy, co-founder of the ACLA and founder/CEO at C4 Labs.
According to Ryan Treacy, co-founder of the ACLA and CEO/Founder of C4 Laboratories, the ACLA was formed for a few important reasons: “We feel it is very important that we encourage and cultivate a professional and collaborative rapport among the reputable Arizona cannabis labs,” says Treacy. “So that we can call upon the collective groups’ years of experience to help provide insight and suggestions on how we as a group can insure the most accurate and consistent results for our clients throughout the state and ultimately their patients.” Treacy went on to add that it is particularly important their collective voice be heard at the State Capitol as lawmakers work towards passing SB 1494.
“There isn’t any reason to wait for someone to get sick before the legislature passes this bipartisan bill. Let’s get it done!”George Griffeth, President of the ACLA, says there is a sense of urgency in passing this bill before the voters decide on legalizing recreational adult-use cannabis next year. “Everyone agrees that now is the time to be proactive to protect patients from unsafe contaminants,” says Griffeth. “Currently 61 tons of medical marijuana is consumed by patients and many believe that the number of people using the medicine will continue to grow. With a ballot initiative related to the recreational use of marijuana facing voters next year, Arizona must act now to make sure standards are in place.”
They say the bill has bipartisan support and many stakeholders in Arizona’s cannabis industry express support for it as well. For Ryan Treacy, he is worried about patients consuming harmful chemicals and toxins. “My colleagues and I are deeply concerned that more than two-hundred thousand people who use medical marijuana could be inadvertently exposing themselves to toxic chemicals, E. Coli, Salmonella or mold,” says Treacy. “There isn’t any reason to wait for someone to get sick before the legislature passes this bipartisan bill. Let’s get it done!”
Treacy says this bill is particularly difficult to pass because the original measure to legalize medical cannabis was a ballot initiative. That means the bill needs 75% support in both the House and the Senate in order to amend the original measure. “The passing of this bill would be a huge win for the patients and will help to ensure honesty and transparency for those that operate in the current medical cannabis program here in AZ,” says Treacy. “This testing bill is also written with legislative intent to cover any and all future adult use or recreational use legislative laws or ballot initiatives. We hope to have a final verdict on this bill by end of this week or early next.”
RoHS 3 (EU Directive 2015/863) adds a catch-all “Category 11” of regulated products that includes electronic nicotine delivery systems (ENDS), e-cigarettes, cannabis vaporizers and vape pens. This category becomes effective July 22, 2019. The most significant restricted substance applicable to this category is lead, and RoHS requires regulated products to contain less than 1000 parts per million (ppm). This follows on the heels of California’s new 2019 regulations requiring the testing of contents of cannabis vape cartridges using even stricter limits for lead (which makes sense because it applies to the product being consumed, not the separate electronic components). These regulations may seem unrelated, but anecdotally there have been widespread reports of higher than expected lead content in China-sourced electronic components, including both cartridges and related electronics. Whether metal used in e-cigarette type products is the source of any lead in the actual nicotine, cannabis or other concentrated product is an entirely different topic, but new laws, and in particular the new RoHS catch-all category, make 2019 an important year for any company responsible for certifying or testing lead levels in e-cigarette or vape products.
Background on EU RoHS
RoHS (Restriction of Hazardous Substances) originated in the EU in 2003 as a restriction on hazardous substances in specified categories of electronics and electronic products. Other countries have passed laws styled after RoHS, but only the EU RoHS is addressed here. Unlike some environmental laws, RoHS is not only focused on the safety of products during their life cycle of consumer use, but is designed to keep restricted substances out of landfills and recycling centers.
The original RoHS restricted the use of lead, cadmium, mercury, hexavalent chromium, PBB and PBDE. RoHS now restricts the use of a total of ten substances after the EU added four types of phthalates to its restricted substance list. Compliance with RoHS became a requirement for the use of the CE mark in 2011, and replaced a RoHS compliant mark on restricted products.
RoHS specified categories for regulation include large household appliances, small household appliances, computer equipment, lighting, power tools, toys, certain medical devices, control equipment (smoke alarms, thermostats and their industrial equivalents), and ATM machines. Newly added Category 11, the “catch all” category, includes all other electronic and electrical equipment not covered in the previous categories, including electronic nicotine delivery systems, cannabis vaporizers and vape pens.
RoHS Lead Exemptions Complicate Compliance
RoHS provides numerous exceptions to its strict 1000ppm lead standard that are slated to expire in phases from 2021 through 2024. Most Category 11 exceptions will not expire until 2024. For example, RoHS permits different levels of lead for lead in glass and ceramics, lead in high temperature solders, and lead in copper and aluminum alloys. So, an e-cigarette may contain some parts that are held to the highest level of lead restriction, it may but contain isolated components that (at least through 2024) are held to more permissive standards. While this leeway may reduce manufacturing costs for certain components, it creates greater complexity in testing. Anecdotal reports suggest that especially for products that compete heavily on price, sourcing from lesser-known Chinese foundries has resulted in unpredictable lead levels.
Take Away Points
As vape and e-cigarette companies compete with new features and design elements each year, and companies rely on new manufacturers, keeping up with regulations has proven to be difficult for both U.S. and for EU regulated products. For example, a company has to comply with numerous regulations regarding the oil or concentrate that will ultimately be inhaled by a consumer, and with regulations like RoHS that regulate parts a consumer may never touch or see. Each year, some company comes out with a new set of electronic features that may interact with newly formulated oils or concentrates, other companies compete for features or price points, making these products a moving target when it comes to testing.
Adding lead to many metals makes them easier to work with and therefore cheaper. Anecdotal reports suggest that especially for products that compete heavily on price, sourcing from lesser-known Chinese foundries has resulted in unpredictable lead levels. This can be the result of any number of causes: changes in sub-contractors, uses of industrial equipment for other products that permit higher lead content, or simply unscrupulous management that is willing to risk a contract to save money manufacturing a batch of components. There is speculation that some lead may leach into oil or concentrates in e-cigarette and vape products from the contact between the oil or concentrate and internal heating elements in certain type of products. RoHS compliance with regard to lead levels may reduce the chance of inadvertent lead contamination by such means, and compliance may therefore yield benefits on several regulatory fronts.
Compliance with RoHS for each part of an e-cigarette or vape therefore requires knowing your supplier for each component, but given increased regulation of these products (both the hardware and consumable elements) this can only help compliance with regulations in every relevant jurisdiction.
On May 15, BioTrackTHC was announced the conditional winner for Maine’s seed-to-sale tracking system government contract. The award is still pending final approval from the State Procurement Review Committee and the successful negotiation of the contract.
BioTrackTHC, a Helix TCS subsidiary, announced in a press release their conditional award earlier this month. The contract means that BioTrackTHC would partner with the state to provide software for tracking both medical and recreational cannabis products from the immature plant to the point of retail sales.
The contract could go for as long as six years, through 2025. If this contract receives final approval from the state internally, then this will become the ninth government contract for BioTrackTHC. Patrick Vo, CEO of BioTrackTHC, expects a quick deployment of the software once the contract is finalized. “We are excited to be working with the State of Maine and are grateful for their vote of confidence in our team’s ability to execute upon state-level tracking contracts and rapidly deploy a sound and secure technology solution,” says Vo.
Zachary L. Venegas, Executive Chairman and CEO of Helix TCS, Inc, says BioTrackTHC’s technology is leading the industry in shaping regulatory oversight for legal cannabis. “As states and countries begin to rollout or expand legal cannabis programs, our technology continues to lead as demonstrated by this Intent to Award and our multiple recent contract extensions with our partners,” says Venegas. “We look forward to playing a vital role in shaping the global cannabis industry and ensuring that it is able to operate efficiently and transparently.”
Within two days of announcing the opening of license applications for growing hemp, the Illinois Department of Agriculture received roughly 350 applications. According to the Lincoln Courier, that number has since grown to 575 applications in the past couple weeks. The Illinois Department of Agriculture has already issued 341 licenses for growing and 79 for processing, as of last Friday.
According to Jeff Cox, Chief of the Bureau of Medicinal Plants at the Illinois Department of Agriculture, a lot of this excitement comes from farmers wanting to branch out from the state’s traditional crops, such as corn and soybeans. “Corn and soybean prices have not been the best over the past few years, and so I think they see this as an opportunity to have a different source of income on their farm,” Cox told the Lincoln Courier.
Morgan Booth, spokeswoman for the Illinois Department of Agriculture told the Chicago Tribune that they were expecting this kind of enthusiasm among farmers. “We knew there was a lot of interest in it,” says Booth. “We were very pleasantly surprised.”
Back in late December of 2018, after the Farm Bill was signed into law, the Illinois Department of Agriculture was quick to jump on the hemp train. They announced their intentions to submit plans for a program to the federal Department of Agriculture, opened a 90-day public comment period, and finalized the rules in April. The state’s regulators hoped to expedite the process and have farmers growing hemp by June 1, which appears to be successful. Dozens of hemp farmers throughout the state are anticipating their first crops will be in the soil by the end of the month.
Sanitation is not just sweeping the floors and wiping down the table – sanitation has a wide-ranging function in a cannabis food manufacturing facility. For example, sanitation covers the employees (and unwanted pests), food-contact equipment (and non-food-contact equipment), trash disposal (including sewage), and more. Ultimately, sanitation systems maintain a clean environment to prevent foodborne illness from affecting human health. Fortunately, there are resources and tools to ease into establishing a robust sanitation program.
Overall, the main goal of sanitation is to produce safe food, to keep consumers healthy and safe from foodborne illness. With the cannabis industry growing and gaining legalization, cannabis reaches a larger, wider audience. This population includes consumers most vulnerable to foodborne illness such as people with immunocompromised systems, the elderly, the pregnant, or the young. These consumers, and all consumers, need and deserve safe cannabis products every experience.
1) General maintenance of the facilities: The buildings and fixtures of the food manufacturing facility cover a lot of ground – hiring a maintenance team will divide the responsibility, ensuring the entire facility can be maintained in a clean and sanitary condition. Furthermore, a team can build out a tool like a preventative maintenance program to restrict issues from ever becoming issues.
Dirty Cloth Towel in Dirty “Sanitizer” Solution (an example of what NOT to do)
2) Control of the chemicals used for cleaning and sanitizing: Not all chemicals are equal – select the appropriate cleaning and sanitizing chemicals from reputable suppliers. Obtain the right knowledge and training on proper use, storage, and proper protective equipment (PPE). This ensures the safe and effective application of the chemicals in minimizing the risk of foodborne illness.
3) Pest control: Understand the environment within the facility and outside the facility. This will aid in identifying the most common or likely pests, in order to focus the pest control efforts. Keep in mind that internal pest management programs can be just as successful as hiring external pest control services.
4) Procedures for sanitation of both food-contact and non-food-contact surfaces: Developing sanitation standard operating procedures (SSOPs) provides guidance to employees on appropriate cleaning and sanitizing practices, to balance effective and efficient operations. A master sanitation schedule can control the frequency of indicated sanitation procedures.
5) Storage and handling of cleaned portable equipment and utensils: Cross contamination in storage can be minimized with tools such as controlled traffic flow, signage, training, color coding, and more.
Sanitary facilities
6) Water supply, plumbing, and sewage disposal: Routine inspections of plumbing, floor drainage, and sewage systems prevent unintended water flow and damage.
7) Toilet facilities: Clearly defining standards for the toilet facilities and setting accountability to everyone who uses them will ensure that the toilet facilities are not a source of contamination for the food products.
PPE for all employees at every stage of processing is essential
8) Hand-washing facilities: Good manufacturing practices (GMPs) include proper hand washing and proper hand washing starts with suitable hand-washing facilities. For example, frequent checks on running water, hand soap, and single use towels ensure that all hands are clean and ready to produce safe food.
9) Trash disposal: While trash can be a source of cross contamination, trash can also attract and harbor pests. Scheduling regular trash disposal and controlling traffic flow of waste are two ways to minimize the risk of cross contamination from trash.
Bonus
Even after meeting these requirements, sanitation programs can be more sophisticated. An example is to institute an environmental monitoring program to verify and validate that the sanitation program is effective. Another example is in identifying and measuring key performance indicators (KPIs) within the sanitation program that can improve not just the sanitation processes, but the operations as a whole. Principally, sanitation is cleanliness on the most basic level, but waste management can encompass sanitation and grow into a larger discussion on sustainability. All in all, sanitation programs must reshape and evolve alongside the company growth.
Sanitation is interwoven throughout the food manufacturing process; sanitation is not a single task to be carried out by a sole individual. As such, it is beneficial to incorporate sanitation practices into cannabis food manufacturing processes from the beginning. Protect your brand from product rework or recalls and, most importantly, protect your consumers from foodborne illness, by practicing proper sanitation.
There has been a move towards the legalization of cannabis for medical and/or recreational use across many countries and US states in recent years, leading to greater demand for accurate potency and safety testing. Despite this, there are currently no standardized regulations between states or countries for quality control including content, composition, adulterants, potency or levels of toxic residues. As such, in many cases where regulations are in place, testing is generally carried out at a small number of approved independent testing laboratories.
The need for self-regulation has led to the growth of portable gas chromatography (GC) being used in the field of cannabis testing.This lack of clarity makes it difficult for consumers to make informed decisions about what they are purchasing, an issue which could be damaging to the industry’s changing reputation. As it stands, producers of cannabis and cannabis-derived products can supply goods with potentially harmful contaminants such as fungi or pesticide residues, which are potentially threatening to human health. Most cannabis products sold legally in the US are required to be tested and labelled for THC, the chemical responsible for most of cannabis’s psychoactive effects. A US study found that as few as 20% of recreational cannabis products are accurately labelled with only 17% of products reviewed accurately labelled for THC content (i.e. within 10% of the labeled value). It also found 23% were under labelled, and 60% were over labelled.
If cannabis were to be categorized as a regulated pharmaceutical drug, it would be rigorously tested to comply with stringent rules and regulations regarding quality and safety of the product, as are all other drugs. However, as there is currently no centralized regulatory body that oversees this, the responsibility of quality assurance falls to the grower, manufacturer and sometimes the consumer.
The Need for Cannabis Analysis
The most common requirement when testing cannabis is positive identification and quantification of the total THC:CBD ratio. In a highly competitive marketplace, this information is important, as cannabis consumers tend to equate THC levels with price. In many instances, lower THC products are cheaper and higher THC concentrations make products more expensive. Without robust systems in place for sufficient testing, this information cannot be accurately determined, meaning the customer often cannot make an informed decision.
Pesticide use is surprisingly common in the cannabis cultivation industry
In addition to potency testing, one of the core issues facing the industry and by extension, the end consumer, is the prevalence of pesticides in cannabis products. In the Netherlands, the Ministry of Environment and Health reported that over 90% of cannabis plants tested had pesticides on them. While steps have been taken to tackle this, the lack of cohesion in testing standards combined with the onus on individual labs to carry out testing, has led to some issues within the industry.
Many individual retailers in the U.S. and internationally are self-testing for impurities such as pesticides, heavy metals and microbials. While there is a clear need for standard testing across all locations, the need for self-regulation at present has led to the growth of portable gas chromatography (GC) being used in the field of cannabis testing.
Using GC as an analytical tool
With the increased need for quality control and quality assurance in the largely unregulated cannabis industry, technology is now more accessible to smaller companies and to people with minimal laboratory experience. There are a range of cannabis testing packages available for smaller individual labs which offer more mobile testing with affordable packages. The lower entry price makes GC analysis affordable for more laboratories while still delivering reliable, high quality results.
Portable GC instruments can offer high quality potency testing, pesticide screening, terpene and flavor profiling, and residual solvents analysis. These instruments can give growers and processors an accurate result of cannabinoid percentages, a fundamental piece of information for growers and dispensaries. Systems can be configured for manual injection or a range of autosampler options can be added.
The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.
GC enables the rapid and accurate identification and quantification of the THC:CBD ratio. This is important for companies which are carrying out self-testing as it allows their customers to have assurances in the short term over the quality of their product, as well as reducing any potential risks to public health.
An example of this in practice is the use of GC by Dutch company Shamanics which carries out testing service for coffee shops in the Netherlands. The company conducts terpene analysis and potency testing to assure the quality of the products it supplies, with a portable GC, which offers the flexibility required without any established guidelines on testing in place.
When testing for potency using the GC, they look for total THC and CBD by converting the acidified versions of the cannabinoids into neutral forms within the heat of the GC injector. The process has flexibility which means that if they need to see both the acidified and neutral versions, they can do this by derivatizing the sample. The accuracy of this process is crucial to Shamanics and similar companies within the industry so that they can accurately judge the quality of a product, and relay this information to retailers and consumers.
The future of GC in standardized testing
While the growing availability of portable GC instruments and the increasing sophistication of individual labs means more companies are able to self-test products, there is still a significant hurdle to overcome in terms of standardising and regulating both the medical and recreational cannabis markets. Where regulation is brought in it should be consistent across states and countries and most importantly, it should be monitored and enforced. In the meantime, responsible producers are using the technology available to them to provide consumers with guarantees that their cannabis products are safe and of a high quality.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
