Tag Archives: outdoor

Your Cultivation Plan is the Most Important Factor to Increase Your Yield

By David Perkins
No Comments

Having a well-built grow room with adequate lighting, the ability to properly control the environment, proper nutrient feedings, a good pest management plan, well trained employees and an experienced cultivation manager are very important to the overall output of cannabis plants. However, even if you have all those measures in place, there’s no guarantee of success. One factor that is often overlooked is how many harvests you can get per year, as clearly the more harvests you can get in a given time period, the more likely your chances of success are in this competitive industry. This is why having a good cultivation plan in place, with proper foresight and planning, is so essential to success.

Increasing yield or production output in a cannabis cultivation facility can often be as simple as having the right cultivation plan in place to ensure that you are harvesting the maximum number of times per year. All it requires is a well thought out plan, and best of all, that does not cost any money if you have someone with enough cultivation experience assisting you and will earn back more than the cost of paying a consultant to get such a plan in place.

In this article I will explain why changing nutrients, grow media or even a cultivation manager may not necessarily increase yield, quality or your chance of success. What you should be focusing on is your cultivation plan and the scheduling of your cultivation cycles.

  1. Why changing nutrient companies may not necessarily increase your yield
Nutrient dosers are used to inject fertilizer directly into irrigation lines

For the most part, nutrient companies use the same ingredients in their product lines and often buy them from the same source, but they combine them in different forms and ratios to create their “unique” product. You can go to a grow store, pick five different nutrient products, read the labels and compare the different nutrients in each one. You will find for the most part that they are very similar. Generally speaking, you could pick any one of those five nutrient companies and have great results. Mixing nutrients into a nutrient tank needs to be done precisely and if your employees are not doing it properly this can lead to plant health issues. In larger cultivation facilities, often nutrient dosers are used to inject fertilizer into the irrigation lines without having to mix nutrients. However, if the dosers are not set to the proper ratios, this can also lead to plant health issues.

There are a few companies that I really like that have a different approach to plant nutrition, which saves time and can prevent human error associated with mixing and applying liquid nutrients. Soilscape solutions, Organics Alive and Beanstock Agriculture all have nutrient lines that are intended to be used with soil or soilless media that can be amended into the soil which provide a slow steady release of nutrients that the plants can uptake as needed. This avoids the risk of human error in repeatedly applying liquid nutrients to the plants.

  1. Why changing grow medium and nutrients will not necessarily improve your yield but may increase yourquality

Whether it is rock wool, coco fiber, a soilless mix or living soil, everything has a limit. Giving your plants the proper amount of water and the frequency at which you water, along with having sufficient room for the roots to grow are key factors to ensuring plant health. If your plants aren’t getting watered properly, no matter what media you are growing in, you will be having problems. Changing things like grow media won’t result in instant success, as there will always be a learning curve when making changes to your cultivation. If you cannot adapt quickly enough, you can quickly create major problems.

plebanisoil
Changing things like grow media won’t result in instant success, as there will always be a learning curve when making changes to your cultivation.

You would be better off to master the grow media you are currently working; you will have more chance of success making slight alterations to your current media than you will if you switch your grow media altogether. There are so many different nutrient lines, soil companies, coco coir companies and the truth is any of them can lead to success.

Changing grow media and nutrients do play a large role in quality though. With cannabis being legalized in many states, the overall quality of cultivation inputs have increased, especially nutrients. However, in general, with some exceptions, the quality of cannabis has not necessarily increased along with the increase in quality of nutrients. One exception: I would argue that switching from salt nutrients and rock wool, to organic living soil will result in an improvement to the flavor, quality and terpenes of the cannabis.

A lot of people use rock wool with salts because it’s easier to scale up than if you are growing in soil, but some quality is also sacrificed. Soil is heavy and messy and most people throw their soil away which takes a lot of money and labor to do. Reusing your soil is one of the best ways to save time, money and increase quality. I had a friend that grew the same variety, same lights, same ventilation but grew hydroponically with salt-based nutrients and he would always say the cannabis I grew, organically, tasted better. The same was true when we grew the same variety outdoors. He used salt-based fertilizer, I used amended soil with water. There wasn’t really a comparison in flavor and the yield was not compromised either! This was his opinion not mine.

I think the vast majority of consumers have not seen the type of quality that someone in Northern California who has been smoking and growing for 20 plus years has seen. Quality is relative to what you have been able to acquire. Most people especially nowadays will never see the quality that used to be common when we didn’t treat the sacred herb like a commodity. When you do it for the love of the plant it shows. Remember, quality is relative to your experience and if salty weed is all you know, you are probably missing out.

  1. Why changing your Cultivation manager may not necessarily increase your yield

Every cultivation facility should have an experienced cultivation manager who is knowledgeable in the areas of nutrient requirements, pest management, environmental requirements, managing employees and overall facilities operations. If a grow room cannot sustain the proper environmental set points, blaming the problems and issues that arise on the cultivation manager is not fair. It is a common problem in the cannabis industry – the owners of a company are not seeing the results that they want and think that by replacing the cultivation manager it will solve all their problems. In reality, often the problem results from upper management or owners of the company not providing the cultivation manager the tools necessary to perform their job at the highest level. Another common problem is when owners fire the cultivation manager and replace them with lower-level employees to manage the facility. The problem with this is those employees do not have enough experience nor the attention to detail to successfully run a cultivation facility. The result is that yield and quality suffer tremendously.

  1. You should be harvesting every 60-70 days
If you are cultivating strains that finish flowering in 60 to 70 days you should be getting five harvests per year.

The reality is there is no one specific thing you can try or buy that will result in success. It is everything combined, the HVAC system, lights, genetics being grown, water quality, air quality, root zone temperature, ability to control environment, having a clean facility, disease free plants, knowledgeable cultivation manager etc. that are required to operate a successful cultivation.

But all of that is less important to yield than a good cultivation plan. Cultivation methods directly tie into the overall production of a facility. But, regardless of whether you’re growing in soil, hydroponics, using LED or HPS, have low or high plant counts, if you don’t have the ability to harvest a grow room, clean and replant within a very short amount of time (ideally one or two days) then you’re going to be losing out on profit.

If you’re cultivating strains that finish flowering in under 60 days you should be getting six harvests per year. If you are cultivating strains that finish flowering in 60 to 70 days you should be getting five harvests per year. To do this, you will need to have the appropriate amount of plants that are ready to be flowered to refill your grow room or greenhouse ready to flower. With a little bit of planning and foresight you will be able to do this, and you will be on your way to producing your highest yield potential.

If you are struggling to have enough plants that are ready to flower once you are done harvesting and cleaning your grow room, having trouble planning your cultivation schedule to maximize production, or struggling to maintain a mother and clone room to supply your own plants or planning for the appropriate amount of labor, contact Floresco Consulting and talk with one of our cultivation advisors to get you back on track. We can guide you to ensure you are harvesting, cleaning and replanting every 60 days. Contact us today to get your facility producing at its maximum potential.

cannabis close up
Soapbox

Too Many Cannabis Firms Put Sustainability in Last Place

By Mitesh Makwana
No Comments
cannabis close up

Cannabis has long been considered a green industry by the masses.

As a standalone item, the cannabis plant is very environmentally friendly. This is particularly true when it comes to hemp, a variety of the cannabis plant with a huge range of environmental benefits. An extremely versatile and robust crop, hemp uses far less land and water than other common crops and even captures carbon dioxide and regenerates soil. Approximately 20,000 products can be made from its seed, fiber and flower, from biodegradable plastics to food supplements, meaning all in all – it is an environmentally and economically sustainable crop

Yet as with most things, when cultivated in mass, the cannabis plant isn’t quite so green anymore. With its high demand for water, land and artificial lighting, cannabis cultivation can actually leave a large environmental footprint (this does however, pale in comparison to the food industry).

What’s more, many firms do not properly understand how to correctly treat and apply chemical fertilizers and pesticides, and use a machine gun approach to growing their crops. This can result in unnecessary bleed waste, which in turn can kill micro-organisms and contaminate soil, water and other vegetation. Packaging has also been cited as particularly environmentally unfriendly in the cannabis industry, with several organizations using single use plastic for their products, due to the strict guidelines attached to packaging products of a medical or pharmaceutical nature.

A field of hemp plants, (Cannabis sativa L.)

So as the CBD, medical and even adult use cannabis industries become increasingly commercialized across the globe, there is risk cannabis might start moving in the wrong direction when it comes to sustainability.

Still relatively new, the cannabis sector is nascent and exciting, with the global cannabis market size valued at $10.60 billion in 2018 and projected to reach $97.35 billion by the end of 2026. Yet as the industry grows, so too will its footprint.

I’ve seen it first-hand. The industry being hugely competitive, so for companies vying for precious investment and fighting for a spot on the stock market, often, sustainability is the last thing on their minds. In my opinion, this is wrong. Not only morally – we all play a part in looking after our planet – but it’s also a poorly calculated business decision.

It’s no secret sustainability and ESG have become a hot topic when it comes to investing. Just yesterday, Credit Suisse told CNBC that the pandemic has accelerated the trend towards sustainable investments. The bank has even introduced an exclusion strategy whereby those investing can actively exclude controversial sectors.

So with the environment firmly on investors’ minds, cannabis firms need to realize that actually, if they want to secure the support of forward-thinking shareholders, they need to consider more than just the bottom line and truly take the sustainability of their operations into account.

photo of outdoor grow operation
Outdoor growing can require less energy inputs

Luckily, there are practices which cannabis cultivators can take on board to reduce their environmental footprint. To start with – growing outdoors. This enables cannabis farmers to harness the sun’s natural power, saving them money on electricity bills and increasing energy efficiency. With cannabis being a rather thirsty plant, water use is also a major concern – although this is nothing compared to the amount of water used by cotton plants. However, it is in fact possible to design indoor operations which recycle close to 100% of the water use, including capturing the perspiration from plants – at AltoVerde this is something we are looking to implement in our upcoming Macedonian sites.

Firms keen to improve on sustainability should also cultivate in a way in which soil is fully replenished and repaired after use – this is called regenerative farming, and it’s extremely effective for maintaining and improving soil quality, biodiversity and crop yields. Another interesting concept is the use of hemp. Some farmers have started using hempcrete – a concrete-like material made from harvested cannabis plants. As if the recycling aspect wasn’t good enough, hempcrete is actually carbon negative, meaning the production of hemp for hempcrete removes more carbon from the atmosphere than it produces.

It’s been incredibly exciting to be a part of the cannabis industry and I am excited to watch its growth in the years to come. It’s taken hard work for the sector to improve its traditionally poor image and to be accepted across the globe, so now, cultivators must lead by example and stop industry from being branded as one which pollutes. By transitioning to more environmentally sustainable practices, firms will be doing their bit for the planet, attracting the investors of tomorrow and ensuring their own success for years to come.

Anthony Franciosi, Honest Marijuana

Essential Elements to Set Up a Green, Zero-Waste Grow Facility

By Anthony Franciosi
1 Comment
Anthony Franciosi, Honest Marijuana

Clean, ecologically sound production methods are the ideal for any cultivation or farming activity. Taking from the earth only what is needed to grow the crop and leaving behind little in the way of chemicals and land/water loss is the goal; with cannabis grow facilities, it can also be a reality.

This type of production does require some capital investment into state-of-the-art equipment and facilities, with standards that are equal to or even surpass current EPA and USDA regulations. While cannabis growing does not yet have access to the organic certification, that doesn’t mean growers can’t abide by and even go beyond the rules, to grow clean, healthy and environmentally sound cannabis.

There are a few essential elements required to make this kind of operation a reality.

Ecologically advanced use of power

  • For any indoor facility, one of the key elements is lighting. Using as energy efficient a system as possible is key. The best option at the moment is LEC lighting, which provides a spectrum of light that is very close to natural. This makes checking on plant progress more realistic and, with the inclusion of UV-B in the spectrum, can improve yields as well. In addition, the LEC bulbs have a long life—up to 2 years—which means lower maintenance costs as well.
  • The demand for high-quality, organically grown cannabis continues to increase

    Another aspect of growing that tends to use a lot of power is the cooling system. A standard HVAC system will be power intensive, so alternative ones like water chilled climate control systems are just as effective and 30% more power efficient. These systems are also able to reuse wasted power by feeding it back into the system, creating an additional 10% energy reduction. In addition, when the outdoor air temperature dips below 45 degrees, a water chilled system can switch to using the outside air, creating 60—70% in energy savings.

Efficient management of water resources

  • Cultivators depend heavily on water to ensure that the plants are hydrated and able to absorb the nutrients they need to grow and thrive. The result for many however is an excessive waste of water. This is a problem when a grow facility is leveraging municipal water resources. A water meter helps to manage and track usage but to ensure that it is used as efficiently as possible, a “top feeding” method of usage ensures minimal water waste (5% or less).

Effective waste management

  • Wastewater is a byproduct of any water intensive cultivation method but there again, managing the systems to ensure that what water isn’t reused and becomes “gray water” is still as clean as possible is the ideal. A high-quality filtration system keeps sediment, chlorine and other harmful elements out of the water supply — and out of the municipal sewage system. Further, by using organic matter throughout the growing process, the wastewater that is produced will meet every federal standard for organic food production.
  • All plant waste in a grow facility—for example: stems and fan leaves—is disposed of according to state and local laws. With cannabis plants, that requires a certain level of security, including locked dumpsters that are only unlocked and placed outside when the removal trucks arrive on site.

Organic farming practices

  • Using OMRI (Organic Materials Review Institute) listed soil is an essential part of clean, environmentally friendly growing. To ensure the proper nutrients are available for each harvest, once a crop is gathered, the soil is transferred to a local landscape company to compost and reuse.
  • Pesticides need to obviously be avoided and all fertilizers need to be USDA approved as organic and all nutrients need to be certified by OMRI to ensure they don’t contain any synthetic materials.

Considering all of these aspects is essential to creating an ecologically friendly grow facility with tremendous yields that are clean and safe for the end consumer, as well as minimizing the impact to the earth.

Clean Green Farming is Good for Cannabis

By Khalid Al-Naser
No Comments

At Raw Garden, we have a ‘Farming First’ philosophy because we understand that the process of farming is the process of managing the plant’s life and the management of the land those plants grow on – this is when the plantgets its chance to thrive but requires that it is properly nurtured in order to provide resources such as high-quality terpenes and cannabinoids.

Our cannabis plants are sun-grown in Santa Barbara county soil just like other California crops. From the seed to the shelf, we are vertically integrated and maintain quality control at every step in the process. We grow our own seeds, farm and harvest our own plants, and process our own products while employing sustainable and regenerative farming practices – only organic and natural fertilizers, soil amendments and pest control methods are used on thefarm.

As farmers we have a responsibility to care for the land and the soil to ensure it is fertile and healthy well into the future. We take care of the soil and it takes care of our plants. The result is premium quality products that our customers love and trust. Our success and commitment to quality is proof that the economics of clean, sustainable operations are achievable. We’re farmers and scientists on a mission to make clean, high quality cannabis that is affordable and accessible.

A few of the sustainable agriculture practices we employ at Raw Garden include:

The Clean Green Certified logo

Clean Green Certification – Since our inception, we have been certified and licensed members of Clean Green, the #1 globally-recognized organic and sustainable cannabis certification program. The program was created in 2004 as a way to standardize legal cannabis products and the result was a program to help farms and brands obtain organic-like certification based on the USDA National Organic program. Clean Green-certified growers and processors regularly win awards for their high-quality products, including our award-winning extracts.

Water Conservation – Our farm team waters at the right time of day to reduce evaporative water loss; we also use drip irrigation and mulch to reduce water waste and runoff. Last year, we used about 8,000 gallons of water per acre on average, which is significantly less than standard outdoor grown crops.

Natural Fertilizer and Pest Control – We apply only organic fertilizers and foliar feeds and we spray only organic pathogen-free inoculants to keep our plants healthy and disease-free, which consistently results in high yields. To naturally deter pests, we recruit beneficial predatory insects like ladybugs and parasitic wasps, in addition to botanical oils and diatomaceous earth.

Precision Agriculture (PA) and Site-Specific Crop Management (SSCM) – We utilize technology to manage crops and increase farm efficiency, such as machine learning for fertilizer optimization and digital sensors in the field to monitor crops.

Author Khalid Al-Naser next at Raw Garden’s farm.
Image by Brian Walker

Soil Health and Terroir – Like grapes for wine, cannabis plants grown in the soil have terroir that affects the flower’s qualities, characteristics, terpene profile, aroma and taste, based on temperature, climate, soil composition and topography, as well as other environmental influences. Micro-climates matter – the same strain of cannabis grown along the coast likely has a different taste and potency than one grown inland. We grow in Santa Barbara wine country for the combination of fertile soil, hot sun, and cool nights which yield an incredibly diverse, potent and flavorful crop of cannabis flowers. Between growing seasons, we employ regenerative agriculture by planting cover crops including oat, beans, peas and buckwheat to add nitrogen and organic matter naturally back in the soil. This method of cover crops also helps reduce pests and soil-borne diseases in preparation for the next growing season. We know that an ideal environment in combination with healthy soil and good land management results in healthier, more vigorous plants, which translates to higher-quality products.

As farmers, it is our responsibility to care of the land with good management decisions today so that we grow the best quality products while better preserving the land for the future. It takes careful planning, knowledge of the land, a commitment to sustainable practices and a desire to put farming first.

Flower-Side Chats Part 2: A Q&A with Bill Conkling, Founder and CEO of Maggie’s Farm

By Aaron Green
No Comments

Flower continues to be the dominant product category in US cannabis sales. In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

Maggie’s Farm is an integrated cannabis company based in Southern Colorado. Maggie’s Farm has seven adult-use and medical dispensaries and cultivates the vast majority of their flower on outdoor farms. All Maggie’s Farm products are sun-grown from seed in soil that is 100% custom-mixed onsite as well as spring-watered, slow-cured and hand-trimmed. Maggie’s Farm does not use any synthetic pesticides or growth hormones in its cultivation. In addition, for the past eight years, Maggie’s Farm has recently obtained Clean Green Certified®, a designation certifying organic standards and testing that mirrors the USDA organic certification. Maggie’s Farm was the first cultivator in Colorado to earn the Clean Green certification.

We spoke with Bill Conkling, Founder and CEO of Maggie’s Farm to learn more about the benefits of outdoor growing, localism and their Clean Green certification. Bill started Maggie’s Farm in 2010 after growing up on cattle ranches and farms in Colorado.

Aaron Green: Bill, thanks for taking the time today. Tell me a bit about how you got involved in the cannabis industry.

Bill Conkling: I am a native of southern Colorado. I was a medical caregiver back in the early days of legalization, and I saw an opportunity to vertically align after my first legal crop in 2010. I opened up the store in 2011. I’ve been a lifelong proponent of medical, recreational and adult use of marijuana.

I come from a background of farmers and I had worked on cattle ranches and farms throughout childhood. As soon as I graduated from college, I went back to work on a large cattle ranch in the four corners area [of southern Colorado]. That’s where I started to incorporate my indoor cultivation experience and skills with outdoor.

Aaron: What trends are you following in the cannabis industry?

Bill: I was one of the first medical operators to support legalization, so I have certainly followed legalization trends. I’ve looked at some other states in our region in terms of growth and legalization.

Bill Conkling, Founder and CEO of Maggie’s Farm

We’re trying to stay a regional supplier and producer so that we are locally grown. We believe the southwest of Colorado is optimal for outdoor cannabis cultivation.

At Maggie’s Farm, we have followed an organic trend from the beginning and I think that’s becoming more of a trend now. We recently received Clean Green certification to that effect. Our goal is to try to provide the healthiest product at a good value to the market.

I believe that all of the products that are made in the cannabis world come from the flower. Downstream products are only as good as their ingredients. It all starts with the flower. So, we focus on producing a clean, top-shelf quality flower that is produced outdoors.

Aaron: How do you define local?

Bill: Local is staying in the climate that is optimal with the least amount of carbon footprint to the earth. That also means trying to operate so that we’re not moving a lot of product across long distances.

We’re trying to set up farms that are in optimal climates. There is a two or three-state region that I believe is the optimal climate for outdoor marijuana cultivation in our country.

Aaron: What states are those specifically?

Bill: I think Colorado and New Mexico, primarily.

Aaron: What geographies is Maggie’s farm currently in?

Bill: We’re in southern Colorado. We don’t go into the plains of Colorado.

Aaron: So Colorado state only right now?

Bill: Yes. The wet mountain range is one of the mountain ranges that we are in. I’ve also cultivated in the La Plata mountain range.

Aaron: What specifically is it about that region that makes it conducive to cannabis growing?

Bill: I think if you get the right elevation and the right microclimates within those elevations, and you have the number of sunny days that Colorado offers in those areas – the intensity of the sunlight, and the cool nights – all those things are factors that coincide in these areas that we like to cultivate in.

Aaron: We’ve been talking about outdoor growth. Does Maggie’s do any indoor?

Bill: No. We’re essentially an outdoor farm. We do a little bit of breeding and we’ve got starter houses, greenhouses and hoop houses for that purpose. We’ve got one greenhouse that we use for some wholesale, but we are primarily outdoors.

Aaron: How do you go about selecting the genetics or evolving the genetics to meet your local environment, given that you’re growing outdoors?

Bill: A lot of it is honestly through testing and experimentation, historically. You just cultivate and harvest and see how the genetics performed, you know? You test, you take test inputs, you take customer reviews, and blind test results from the team and from the customers and you consider all those facts.

Aaron: Do you produce and use your own seeds or are you purchasing those?

Bill: We have done both. I think I’ve probably created somewhere north of 800 different strains at this point. So, we’ve got a huge seed bank. We do also buy from vendors and experiment with some of those genetics as well.

Aaron: Do you market your seeds in Colorado?“I don’t think that you can get anywhere near the terpene value indoors that you can outdoors.”

Bill: We do not.

Aaron: How did you settle on outdoor-only as the strategy for Maggie’s?

Bill: I believe outdoor is a premium flower. I think it has less impact on the earth. I think that there is a lot less pest mitigation than there is indoors, which makes it a healthier, cleaner product. You don’t have to mitigate the concentration of pests that you get in temperate climates of stagnant corners of greenhouses and buildings that you cultivate indoors. Therefore, you never get into the situations as often or as intensely, where you might have to really work hard at mitigating your pests. You can use the natural predator insects you can introduce and oftentimes they survive and they create their own climates and it’s a more natural, healthier product.

I don’t think that you can get anywhere near the terpene value indoors that you can outdoors. You just don’t have the value of the sun, which nothing compares to. You can hold up as many high wattage bulbs as you want and you don’t even pale to the sun and the effect that the sun has on the flower.

Aaron: What are some of the challenges of growing outdoors that you see frequently?

Bill: You have to be nimble. You can’t rely completely on a schedule. You’ve got to be able to shift around in your planting days and your harvest dates.

You’ve obviously got to be on your toes all the time for weather changes. Higher humidity years can tend to bring more insects or pests. Some years you’ve got higher winds than other years. This year, we had a snowstorm on September 9, which left nine inches of heavy wet snow on one of our farms. So, you’ve got to be nimble, very proactive and ready for those kinds of weather events that happen in very short notice.

Aaron: We mentioned Clean Green Certified® briefly. Can you explain more about the Clean Green certification and why that’s an important thing for you at Maggie’s?

Bill: The choice to become Clean Green Certified® was really an effort to validate the organic process that we have. We vetted out what we believe was and still is the premier, organic criteria certification endorsement in the market for cannabis. To this day, they really do an ethical, vetting-out process whereby if you fail the parts of any of the soils that are sent to federal-licensed labs, you do not get your endorsement. The owner of Clean Green also had a mother company that was an endorser of other agricultural products such as coffee, wheat and dairy.

Aaron: How would you compare Clean Green Certified® to USDA Organic?

Bill: Identical. When the federal government legalizes, we are poised to automatically convert to a USDA Organic certification and endorsement. The processes the founder and owner of Clean Green uses to test cannabis is the same process used to test other agricultural industries. For plants, he takes random samples of soils throughout a cultivation field and sends them to a federal-licensed lab where they test for impurities.

Aaron: Did you decide to get your Clean Green certification due to pulling from the market, or is this more something you decided to do internally as Maggie’s Farm?

Bill: I decided to do this internally. I wanted to be recognized for all of our organic efforts and I wanted to let people know that we have a safe product that doesn’t have synthetics in it. Even to this day, a lot of people in Colorado unlike the coastal states like maybe California are still pretty unaware of a Clean Green certification or even the fact that there is an organic process for cannabis or marijuana. So, it’s really just to let our customers know that there is value in a safe, healthy choice for them.

Aaron: What kind of products do you create at Maggie’s farm?

Bill: We grow flower. We are also a big producer of a very high-quality pre-roll. We are developing promoted products as well.

Aaron: Do you do fresh frozen?

Bill: We do some, yes.

Aaron: Are you selling direct to the dispensary or to manufacturers?

Bill: We finally had produced some excess. So, we started wholesaling flower this year and lots of high-quality shake for concentrates to concentrate makers. Our customer is typically a little more of a mature customer. I don’t want to say necessarily older, but I think we probably do hit a little bit of a higher, more experienced, health-conscious, connoisseur customer.

Aaron: Can you give me an idea of some of the regulatory challenges in Colorado that you’ve faced in the past or are facing today?

Bill: The perpetual change of regulation has been a challenge. Being a competent operator in cannabis means getting used to the change and having the resources to be nimble with compliance. We haven’t had common problems such as metals, mold or mildew issues. However, we have had some hardware issues, which required us to change cameras along with other technical intricacies.

Aaron: How many acres do you have?

Bill: We have about 30 acres of secured premise cultivation.

Aaron: Is that all managed in-house or sublet?

Bill: It’s all managed and operated exclusively by Maggie’s Farm.

Aaron: What’s next for Maggie’s Farm? What are you excited about?

Bill:  We want to continue to put a higher scale of a very healthy, quality, value flower out there and to be able to offer that to more states initially states that are within our region and eventually states across the US. Also, we will continue to do our best to meet the growing demand for healthier choices in general.

Aaron: Lastly, what are you personally interested in learning more about?

Bill: How we can continue to be as earth-conscious as we can be? How we can continue to look for ways to give back to our communities? How we can continue to operate as a view of made in the USA and to try to just support local regional and national products and vendors? Just how to be more aware and always look for opportunities for self-improvement.

Aaron: That concludes the interview, thank you Bill!

Why You Should Consider Parametric Insurance to Protect Your Outdoor Cannabis Crop

By Evan Stait
1 Comment

In May 2019, there were 4,400 reports of tornadoes, hail and high winds across the U.S. That’s the highest number of similar weather incidents on record since 2011. This increasing number of weather incidents has a huge effect on the cannabis industry, which has turned more frequently to outdoor cultivation since legalization.

While outdoor cultivation can develop the flavor of the cannabis crop, much like wine, it also brings with it some unique challenges. Each component of the weather – wind, rain, temperature – plays a role in whether a crop succeeds or fails. While conditions one year may easily lead to a bumper crop, the conditions the following year may not be as favorable. And as the weather becomes more volatile due to climate change, growers are ever more at risk, especially when they aren’t insured.

Evan Stait, author and commercial account executive for HUB International

Unfortunately, traditional crop insurance isn’t available for outdoor cannabis cultivators, primarily because of a lack of data on yield performances – and the impact the weather has on yields. Insurance companies don’t create policies until they have the data to back the policy. But meanwhile, the growers are assuming all the risk.

Enter parametric insurance. Parametric insurance is a program that pays out after a certain parameter is met. In the case of cannabis growers, the parameters are weather-related. The policy is triggered when the weather varies from the average – if there is too much rain during a specific period of time, for example, or an occurrence of large hail. Because the policy is related to average weather, it has to be tailored to the specific growing region – which means the parameters for Colorado won’t be the same as a policy for Maine.

For cannabis crops, coverage can be created for the following parameters:

  • Rain (recorded in inches of rainfall over a period of time)
  • Wind (recorded in miles per hour)
  • Early freezing (using recorded temperatures)
  • Hail (measures intensity and size of the hail)
  • Drought (for non-irrigated plots)

Once a parameter has been set, the policy starts to pay out at the strike point, or the average measurement specified in the policy. Coverage continues to pay out until the exhaust point, or the entire limit of the coverage is paid out. It works well because it’s straightforward: The further away from the average, the more the likelihood of catastrophic loss.

Parametric insurance isn’t for everyone. It’s a program designed to fill gaps that exist within the traditional insurance system. Nor is it designed to stand alone. But it can protect outdoor cannabis cultivators from weather risks that are truly beyond their control, especially given the hardening property insurance market.

In addition, it works for two simple reasons:

  1. Simplicity: Recorded weather events leave no room for ambiguity or dispute. You don’t even need an adjuster to guide the claims process. The official weather data proves what happened.
  2. Correlation: There is a high degree of correlation between measurable weather events and potential damage to outdoor crops.

Parametric coverage is not widely available. Many insurance professionals may not even know of it. But with the property insurance market hardening and a growing need to protect you and your cannabis business from weather-related disaster, parametric coverage may be your best bet. Make sure you speak to a broker who knows about it.

5 Factors to Keep in Mind When Entering the Regulated Market

By David Perkins
No Comments

It’s a different world growing cannabis in California- in fact, it’s a completely different experience than it was even four years ago. It can be overwhelming to begin the process, which is where an experienced cultivation consultant can help. This article will highlight 5 factors to keep in mind before you begin growing in California’s regulated recreational market.

Start Up – Costs, needs & endless variables

So you’ve decided to begin a recreational grow, here are the factors to consider before you get started.

Permitting, the necessary pre-cursor to cultivation, can be time- consuming, extremely expensive, and overwhelming. General experience dictates that any grow will take longer than planned and cost way more money than you ever expected or anticipated. Always account for more money and time than you think you need. Working with an experienced consultant can help you plan and account for all the costs and variables you may not have considered, prior to beginning cultivation, in order to ensure your success.

Understand that growing boutique style cannabis is very difficult on a large scale, consistently.

Equipment. When choosing what equipment to use, stick to reputable equipment manufacturers. Don’t just go with the latest high-tech gear because you see it on Instagram being advertised by a big, fancy grow operation. Stick to what you know best. Do your homework and research the equipment as much as possible, prior to purchase. Use equipment that has been tested and well documented with success. Some questions to ask yourself: is this necessary? Is it cost effective? Will it help me reach my goals?

Grow your business slowly and naturally. Getting too big too quick will most likely expose inefficiencies in your operating plan, which will be further compounded when production increases. Don’t sink before you can swim and start out on a massive scale before you have perfected your process.

Cultivation – It pays to design it right the first time

Success begins in the grow room. Never forget that. A properly engineered cultivation plan can be the difference between 3 and 6 harvests per year. Again, it is imperative here to do your homework. A well-thought-out plan can make or break you, and that is where an experienced cultivation consultant can help.

Set realistic expectations. Understand that growing boutique style cannabis is very difficult on a large scale, consistently. Don’t expect to grow perfect cannabis every time – it is unrealistic and can ultimately lead to failure if your financial model depends on it. Growing a plant, while mostly in your control, involves too many variables to rely on a perfect outcome round after round. You can do everything in your power, yet something unexpected can still happen and be detrimental to your yield, and therefore your profit. You must expect and plan for this.

Automating as much of your grow as possible is always a good idea. This will greatly reduce labor costs and more importantly, minimize human error. In some instances, it will even allow you to review data and information remotely, in real time, allowing you to ensure your cultivation site is always running as efficiently as possible, even when you aren’t there.

Processing – Don’t skimp on the process

If you are going to be harvesting cannabis for flower, it is imperative to have a properly built facility for drying, curing and storing your product. You must consider that this building will need to be large enough to house and properly store all of your harvest at once. This can make or break your crop at harvest time. If you don’t have the capacity to handle your harvest properly, it can lead to disastrous issues such as mold or too quick of a cure – conditions which make your cannabis unsellable in the regulated market.

dry cannabis plants
Rows of cannabis plants drying and curing following harvest

Although costly, if done correctly, you can also design this area to serve as your propagation, trimming, and breeding areas, which will ultimately save on costs in the long run.

Also keep in mind, hand trimmed cannabis will always look more appealing to the consumer than machine trimmed cannabis. However, hand trimming can be time-consuming, labor-intensive, and therefore far more costly than machine trimming. These are factors you will need to consider and budget for when deciding how to proceed. If you use a machine, you may save money up front, but will you be able to sell your cannabis at full price?

Distribution – Have a plan

It is a good idea to have a plan for distribution, prior to start up. If you have an agreement with a retail outlet (or contract with a distributor) in writing, you will protect yourself from financial failure. Cannabis will never grow more valuable over time, therefore, you want to have a plan in place for distribution, as soon as the cannabis is harvested and processed. Just as was the case in the black-market days, you never want to hold on to your cannabis for long periods of time.

Do not distribute without agreements in writing! While some oral agreements may be enforceable, it will be extremely costly to litigate. Therefore, you should plan to hire a lawyer beforehand to create fail-proof agreements that will hold up in court, should a distributor not pay you for your product.

Sales – Build your brand, but be realistic

Building your brand is important. And if you don’t produce your own high-quality flower you cannot expect to have a product up to your standards. Your brand will not be successful if you cannot consistently provide consumers with high quality cannabis. Relying on other growers to produce your cannabis for you is risky to your brand. Even if you are a manufacturer, you may not be able to rely on other suppliers to maintain the quality volume you need in order to manufacture your products consistently.

The regulated market in California is new. Therefore you must necessarily account for a great degree of price fluctuations in the market. When creating your budget at the outset, you must account for fluctuations in profit. Knowing when prices are going to be at their lowest can help you avoid having an oversupply of inventory. It can also help you avoid such situations by planning your cultivation/harvest accordingly.

There are both consumer and government influenced market trends that can affect your bottom line. These must be accounted for at the outset.

On the consumer level, you must know what people are buying and how they are consuming. And these factors can change quickly with the introduction of new technology, methods or new devices intended for cannabis consumption. You must stay on top of these trends.

The government regulations can also affect these trends. Products used for cultivation can become banned, i.e. products you once relied on in your cultivation can be found to have contaminants known to cause test failures, even in “approved products.”

Ultimately, all of these factors can make or break your success, and therefore, must be considered, researched and accounted for prior to beginning your cultivation in the regulated market. Working with a consultant with over 20 years of grow experience, and more importantly, extensive experience in large scale cultivation in the regulated market, can help you achieve the success you desire. Cultivation in the regulated market is costly, but working with a consultant can help you cut costs at the outset, and save you from unexpected expenses in the long run.

The CalCannabis Appellations Project Is About to Spark a New Chapter in Place-Based Branding

By Amy Steinfeld, Jack Ucciferri
1 Comment

Connoisseurs know that pairing a fine cut of steak with a Napa Valley cabernet sauvignon is a sure winner. But how many are aware that pairing strawberry cheesecake with a certified Santa Cruz Blue Dream cannabis strain creates an equally delicate palatal synergy? Thanks to the California Department of Food and Agriculture’s CalCannabis Appellations Project (“CAP”), premium cannabis regions will soon have the potential to capitalize on such newfound awareness among discerning consumers.

For decades, cannabis connoisseurs have been willing to pay a premium for flower said to have been grown in certain regions or with certain techniques, but because of cannabis’ legal status, supply chains have been opaque. As a result, cultivators of distinct cannabis strains struggled to capture the full market potential of their products. That has begun to shift with implementation of California’s Cannabis Track-and-Trace System. The costs associated with implementation of the METRC1 system have been bemoaned by many in the industry, but there is also tremendous potential value in having the most transparent supply chain in the world. The CalCannabis Appellations Project is the vehicle through which brands will be able to harness that value.

The underlying premise behind the CalCannabis Appellations Project is that the distinctive qualities of a cannabis product are often attributable to where and how the plant is grown. Through this project, CalCannabis is developing a statewide appellations system2 that will allow qualifying licensed cultivators to effectively communicate information about their cannabis crops (i.e., the standards, practices and/or varietals used) through labels, advertisements and other marketing techniques. It will also prevent disingenuous cannabis cultivators from making inaccurate claims about where and how a product is grown, which protects the integrity and value of the appellation.

What is an appellation?

In general terms, an appellation is an identifying name, title or label that can be legally defined and protected. Appellations are most commonly used in the wine industry to geographically identify the origin of grapes in a particular bottle. This place-based identification system comes from an understanding that certain regions have unique environmental and growing characteristics, which result in a product that cannot be produced from other regions even when the same varietals are used. Famous wine appellations or American Viticultural Areas (AVAs) in California include the Napa Valley and Santa Ynez AVAs, and sub-AVAs such as the Russian River Valley AVA, located within the larger Sonoma County AVA.

Recognizing there are also growing regions that produce uniquely distinctive cannabis, CalCannabis is developing a process for:

  1. Establishing an appellation (i.e., identifying regions that produce distinctive cannabis and defining standards, practices and/or varietals that must be used in those regions to qualify for an appellation); and
  2. Qualifying to use a particular appellation once they are established (i.e., determining the cannabis cultivators that can legally label or market themselves as belonging to a particular appellation).

While the state has not released program details, it’s likely that cultivators will have to demonstrate their outdoor-grown cannabis is distinctly unique.3 CalCannabis has until Jan. 21, 2021,4 to establish these processes, but a draft is expected to be released by early January 2020.5 This is an opportunity for cultivators to organize and participate in the process to define and create unique local appellations.

What are the benefits of an appellations system?

Napa wine country
Image: James Faulkner, Flickr

Appellations benefit both cannabis cultivators and consumers. It allows small farmers to capture the value that consumers place on unique and local cannabis products. Allowing for product differentiation through an appellations system will prevent cannabis from becoming a commodity—a situation that could result in indistinguishable products and a single market price for cannabis regardless of how or where it is grown. Thus, an appellations system protects not only local economies and farming communities, but also consumers that care about the origin and growing practices of their cannabis.

A criticism of appellations, particularly in the wine industry, is that they can disincentivize innovation and industry growth when strict growing practices and standards are required to be a part of an appellation. This will be an important consideration as CalCannabis establishes its appellations system.

County of Origin

In addition to setting up an appellations system, the CalCannabis Appellations Project will expand upon current county of origin regulations. Unlike an appellation designation, the county of origin designation is designed to be much more inclusive—it can currently be used on any cannabis product as long as 100% of the cannabis is grown within the designated county.6 Whereas an appellation will communicate information about the quality of a cannabis product and how it was produced, a county of origin designation is more like a “Made In” label. For example, a county of origin designation can be applied to indoor cannabis whereas an appellation will likely only include sun-grown cannabis.

There is also a desire to allow city of origin designations in addition to county of origin designations, which would enable products grown wholly within the political boundaries of a city to further differentiate themselves.7 As the legal cannabis landscape changes nationwide, it may also be important to have a statewide appellation allowing products to be marketed as “Grown in California.

What should cannabis cultivation regions be doing now?

After CalCannabis releases a draft process for establishing an appellation, the next steps will be clarified. However, not everyone is waiting. For instance, growers in Mendocino County have already started to organize.8 The Mendocino Appellations Project divided the county into 11 unique subregions based on regional growing conditions and practices that could potentially be turned into appellations in the future. The goal of the appellations outlined by the Mendocino Appellations Project is to protect cannabis products coming out of Mendocino County and preserve the region’s growing heritage.

A group in Sonoma County is also discussing the establishment of appellations with the hope that it will help differentiate their cannabis and draw attention to the unique microclimate and soil structure in parts of Sonoma County.9 The groups involved in these discussions also believe it will allow cultivators to develop strict growing standards and to protect certain strains, while creating new jobs and encouraging agritourism. Appellations will become increasingly important as sophisticated consumers begin to select quality cannabis that aligns with their preferences.


References

  1. METRC is the third-party-owned software contracted by California authorities to implement the commercial cannabis track-and-trace system “from seed-to-sale.”
  2. Passage of Senate Bill 185 calls for the use of the term “appellations of origin” instead of “appellations.”
  3. Based on comments made during the October 23 Cannabis Advisory Committee Meeting.
  4. Business and Professions Code Section 26063.
  5. Based on comments made during the October 23 Cannabis Advisory Committee Meeting.
  6. Business and Professions Code Section 26063(a).
  7. Based on comments made during the October 23 Cannabis Advisory Committee Meeting.
  8. https://swamiselect.com/mendocino-appellation-project/
  9. https://www.sonomacountygazette.com/sonoma-county-news/cannabis-appellations-the-small-cannabis-farmers-elyon-cannabis.

Beyond THC: Encouraging Cannabinoid and Terpene Production with LEDs

By Andrew Myers
No Comments

For years, tetrahydrocannabinol (THC) got all the attention. While THC certainly delivers its own benefits (such as relaxation and pain relief), there’s a whole host of other – and often overlooked – compounds found in cannabis with important benefits as well. THC is truly only the tip of the iceberg when it comes to cannabis’s potential.

As the cannabis industry evolves with changing consumer tastes and developing medical research, growers may employ techniques to boost cannabinoid and terpene profiles in their harvests – beyond merely focusing on THC. Advanced LEDs allow growers to elicit specific biological responses in cannabis crops, including increased concentrations of these naturally occurring chemical compounds.

The Foundation of Cannabis’s Effects
Whether used medicinally or otherwise, cannabis has changed our society and many of our lives – and there’s a collection of naturally occurring chemical compounds, known as cannabinoids and terpenes, to thank.

  • The cannabinoids THC and CBD are the most common and well-researched, however they are accompanied by more than 200 additional compounds, including cannabinol (CBN), cannabigerol (CBG) and tetrahydrocannabivarin (THCV), among others.
  • The cannabis plant also contains terpenes. These structures are responsible for giving flowers (including cannabis), fruits and spices their distinctive flavors and aromas. Common terpenes include limonene, linalool, pinene and myrcene.

Both cannabinoids and terpenes are found in the cannabis plant’s glandular structures known as trichomes. Look closely, and you’ll notice trichomes coating the cannabis flowers and leaves, giving the plant an almost frosty appearance.

macropistil/trichome
A macro view of the trichomes and pistils on the plant

Trichomes – which are found across several plant species – are a key aspect of a cannabis plant’s survival. The specific combination of metabolites produced by trichomes may attract certain pollinators and repel plant-eating animals. Moreover, trichomes (and specifically THC) may act as the plant’s form of sunscreen and shield the plant from harmful ultraviolet rays.

While they play an essential part in the cannabis plant’s lifecycle, trichomes are volatile and easily influenced by a range of environmental factors, including light, heat, physical agitation and time. Therefore, environment is a defining variable in the development of these important structures.

How LEDs Support Cannabinoid and Terpene Development in Crops
Spectrally tunable LEDs give indoor cannabis growers unparalleled control over their crops. As research has expanded about plants’ responses to the light spectrum, growers have discovered they are able to elicit certain physiological responses in the plant. This phenomenon is called photomorphogenesis. At its root, photomorphogenesis is a survival tactic – it’s how the plant responds to miniscule changes in its environment to increase the chances of reaching full maturity and, eventually, reproducing. While cultivated cannabis plants won’t reproduce at an indoor setting, growers can still use the light spectrum to encourage strong root and stem development, hasten the flowering process and the development of bigger, brightly colored flowers.

It makes sense that using the proper light spectrums may also have an impact on the production of specific cannabinoids and terpenes – an important factor when responding to highly specific consumer needs and desires, both within medical and adult-use markets.

Here are a few more reasons why utilizing full-spectrum LEDs can lead to higher quality cannabis:

  • Lower Heat, but the Same Intensity.
    When compared to HPS, fluorescent and other conventional lighting technologies, LEDs have a much lower heat output, but provide the same level of intensity (and often improved uniformity). This represents an enormous advantage for cannabis cultivators, as the lights can be hung much closer to the plant canopy without burning trichomes than they would be able to with other lighting technologies.
  • UV Light. Cannabinoids and terpenes are part of the cannabis plant’s natural defense mechanism, so it makes sense that lightly stressing plants can boost cannabinoid and terpene numbers. Some studies illustrate an increase in UV-B and UV-A light can lead to richer cannabinoid and terpene profiles.1 It’s a fine line to walk, though – too much UV can result in burned plants, which leads to a noticeable drop in cannabinoids.
  • Full-Spectrum Capabilities. The cannabis plant evolved over millions of years under the steady and reliable light of the sun. Full-spectrum is the closest thing to natural sunlight that growers will be able to find for indoor growing – and they’ve been shown to perform better in terms of cannabinoid development. A 2018 study titled “The Effect of Light Spectrum on the Morphology and Cannabinoid Content for Cannabis Sativa L.,” explored how an optimized light spectrum resulted in increased expression of cannabinoids CBG and THCV.2

This is the most important tip for indoor growers: your plants’ environment is everything. It can make or break a successful harvest. That means cultivators are responsible for ensuring the plants are kept in ideal conditions. Lights are certainly important at an indoor facility, but there are several other factors to consider that can affect your lights’ performance and the potency of your final product. This includes your temperature regulation, humidity, the density of plants within the space, CO2 concentration and many other variables. For the best results, your lights should be fully aligned with other environmental controls in your space. Nothing sabotages a once-promising crop like recurrent issues in the indoor environment.

solsticegrowop_feb
Indoor cultivation facilities often use high powered lights that can give off heat

Cannabinoids and terpenes take time to develop – so cultivators will want to avoid harvesting their plants too early. On the other hand, these compounds begin to degrade over time, so growers can’t wait too long either.

Cultivators seeking potent cannabinoid and terpene profiles must find a happy medium for the best results – and the best place to look is where cannabinoids and terpenes develop: the trichomes. With a microscope, cultivators can get up close and personal with these sparkly structures. Younger plants begin with clear trichomes, which eventually become opaque and change to amber. Once your plants show amber-hued trichomes, they’re ready for harvest.

The truth here is that there’s no perfect formula to elicit show-stopping cannabinoids and dizzying terpenes with every harvest. A lot of cannabis cultivation is based around trial-and-error, finding what works for your space, your business and your team. But understanding the basics around indoor environmental controls like lighting and temperature – and how they can affect the development of cannabinoids and terpenes – is an excellent place to start. Using high quality equipment, such as full-spectrum LED lighting can boost both cannabinoid and terpene production, resulting in richer, more potent and higher quality strains.


References:

  1. Lyndon, John, Teramura, Alan H., Coffman, Benjamin C. “UV-B Radiation Effects on Photosynthesis, Growth and Cannabinoid Production of Two Cannabis Sativa Chemotypes.” August 1987. Photochemistry and photobiology. Web. https://onlinelibrary.wiley.com/doi/abs/10.1111/j.1751-1097.1987.tb04757.x?&sid=nlm%3Apubmed
  2. Magagnini G., Grassi G., Kotiranta, S. “The Effect of Light Spectrum on the Morphology and Cannabinoid Content of Cannabis sativa L.” 2018. Medical Cannabis and Cannabinoids. Web: https://www.karger.com/Article/FullText/489030
german flag

Does Germany Have a Gray Market Problem?

By Marguerite Arnold
No Comments
german flag

Tilray just did something very interesting. In addition to announcing that it was shipping product to German distributor Cannamedical via its Portuguese facility, it also announced that it had begun outdoor cultivation.

Groovy.tilray-logo

Even more intriguing: the company is claiming that somehow, via its proprietary technology (apparently), this kind of crop will be legit for distribution within the EU medical system.

There is only one problem with this. Outdoor growing does not sound remotely GMP-certified.

Here is the next bit of exciting news. Tilray, apparently, is not the only large Canadian cannabis company now operating in Europe that appears to be trying to get around GMP certifications for medical market penetration. Or appear oblivious to the distinctions in the international (and certainly European market).

german flag
Photo: Ian McWilliams, Flickr

And things are a bit smelly on that front, not only in Denmark post CannTrust, but in truth even in Germany, the supposed “Fort Knox” of regulatory consumer and pharmaceutical standards.

In fact, at least according to insiders, there is apparently quite a bit of gray market product sloshing around in the Teutonic medical market. Even though so far, at least not publicly punished for the same, nobody has been caught. Or at least publically reprimanded.

And who is on the hot seat at least according to most of the licensed if not just pre-licensed indie producers and distributors who were contacted for this story? Sure, there are dark horse “start-up” indie violators, but they are not the only problem. Many who talked to CIJ named big public Canadian companies too. And potentially Bedrocan beyond that.

Who Is Who And What Is What?

Part of the problem, beyond any kind of deliberate flouting of regulations on the part of many companies who are at least trying to understand them, is that global standards are different. “GMP certifications” of every country, even within a region like Europe, are in fact, not uniform. That is why, for example, the new EU-US MRA agreement had to be signed first regionally and then on a state-by-state level across the EU.

Beyond Germany of course, there are other problems that are coming to the fore.In the medical cannabis space, in particular, right now, that is causing problems simply because many with pharma experience are not hip to the many risks in the cannabis industry itself. On the Canadian, Australian and American side, there is also a lot of bad advice, in particular, coming from consultants who should know better.

To be properly EU and German GMP-certified, one of the required steps is to have German inspectors walk your production floor. It is also not good enough to have “pesticide-free” or national organic certification at the crop cultivation site, and add GMP cert at time of “processing.” That piece of misadvise has been showing up not only in Canada, but Australia too. And creates a nasty reality if not expensive retooling upon entering the legitimate market in Europe, for starters.

These Issues Affect Everyone In The Industry

German Parliament Building

In an environment where ex-im is the name of the game, and even the big guys are short of product, compliance is getting granular as smaller players step up to the plate – and many if not most hopeful Canadian producers (in particular) now looking to Europe for sales are not (yet) up to speed.

A big piece of the blame also lies in the lack of proper administration at the federal and state level too – even auf Deutschland. To get a distribution license, a company must actually get three licenses, although there are plenty in the market right now who begin to describe themselves as “distributors” with less than the required certs.

The lack of coordination and communication, including which certs to accept as equivalent and from where is creating a market where those who know how to game the system are.

For example, several people who contacted CIJ, claimed that uncertified product was making its way into Germany via Central and Latin America, through Canada, picking up “GMP cert” along the way. In other words, not actually GMP-certified but labelled fraudulently to make it appear that way.

The same claims were also made by those with on-the-ground industry knowledge in South Africa (Lesotho).

Beyond Germany of course, there are other problems that are coming to the fore. As CIJ recently learned, a firm authorized by the Dutch government to provide cannabis packaging, including for exports, was not GMP certified until July 2019 – meaning that all product they shipped internationally even within Europe before that date potentially has labelling issues. Cue domestic importers. If not regulators.

Grey Market Product Is Making Its Way In Through Official Channels

For those who are taking the time to actually get through the legal registration and licensing process, it is infuriating to see others who are apparently fairly flagrantly buying market position but are in no position to fulfil such obligations. It is even more infuriating for those who intend to meet the requirements of the regulations to realize that the vast amounts spent in consulting fees was actually money paid for inaccurate information.

And the only way ultimately the industry can combat that, is by standing up, as an industry, to face and address the problem.German distributors are so aware of the problem that they are starting to offer gap analysis and specific consulting services to help their import partners actually get compliant.

Government agencies also might be aware of the problems, but they have been reluctant to talk about the same. CIJ contacted both BfArM and the local Länderauthorities to ask about the outdoor grow in Portugal and the lack of GMP cert for a Dutch packager. After multiple run-arounds, including sending this reporter on a wild rabbit chase of federal and state agencies (who all directed us back to BfArm) and an implication by the press officer at BfArM that the foreign press was not used to talking to multiple sources, CIJ was redirected back to state authorities with a few more instructions on which bureau to contact. The state bureau (in Berlin) did not return comments to questions asked by email.

Here is the bottom line that CannTrust has helped expose this summer: the entire global cannabis industry is trying hard to legitimize. Not every company is shady, and there are many who are entering it now who are playing by the rules. But those who are hoping to exploit loopholes (including “name” if not “public” companies) are also clearly in the room.

And the only way ultimately the industry can combat that, is by standing up, as an industry, to face and address the problem.


Editors Note: This is a developing story. CIJ has been contacted by the Dutch Cannabis Agency as it investigates what appears to be an intra-government debate over qualification of EU-GMP cert, acceptance of audit documents and other matters within European countries that appear to have caused much of this confusion with regards to Bedrocan and its packager Fagron. Many reputable, licensed sources within the industry spoke to us on deep background, out of concern that they too would be held liable. That said, so far, nobody can explain why the only licensed Dutch packager, was issued a new EU GMP cert document on July 9, 2019, the same day that Danish authorities halted CannTrust product entering Denmark. That is a government decision. Further it is also still unclear why rival cannabis companies would attempt to contact the cannabis media with a certain (and misguided) spin on this situation.