Tag Archives: package

Sustainability in Cannabis Packaging: Balancing Preservation and Environmental Impact

By Jack Grover
No Comments

Even a cursory review of cannabis reveals that the market has been notoriously wasteful, polluting the environment with chemical fertilizers, misused pesticides, contaminated plants, and—perhaps most problematically—thoughtlessly excessive packaging.

The industry is in dire need of sustainable practices, and the easiest way to start an impactful new trend is from the outside in: a.k.a., adjusting how you’re parceling your products.

Honing in on sustainable packaging isn’t just a good move for the environment. It’s also more cost-effective, less labor-intensive and allows you to provide consumers with the best possible version of your flower—no matter how far through the supply chain it’s had to travel before hitting retail shelves.

Cannabis has progressed: It’s time for its packaging to do the same

By the time legalization began sweeping the nation, the industry already had several decades of experience operating underground. With that discretion came a lot of built-in habits around not attracting attention, and for packaging, the focus was solely on not looking like a cannabis product.

An overabundance of plastic isn’t cutting it anymore—not only when it comes to environmental friendliness, but for the integrity of the product itself.

Today, increased legalization grants operators the freedom to expand without the fear of being seen, and as a result, there’s no longer any excuse for wasteful packaging to be the industry’s norm. Glass jars, Ziplocks and an overabundance of plastic isn’t cutting it anymore—not only when it comes to environmental friendliness, but for the integrity of the product itself.

“I’ve been designing packaging in the cannabis industry since 2013, and a lot of trends have come and gone. We used to put flower in plastic Rx jars and paper envelopes. In general, there was a lot of waste: excess boxes and jars that all get thrown away,” says Legacy’s Chief Cannabis Officer Ryan Hedrick. “And when consumers pull the products out of those containers, your marketing doesn’t remain intact. The box gets thrown away, and now they’re just carrying around a labelless jar. Not only is it bad for the environment, but it isn’t helping you promote your brand at all.”

How sustainable storage optimizes curing and shelf life of flower

As for the curing process, Hedrick used to use airtight buckets, which both took up a lot of room and wasn’t at all effective for maintaining cannabis’s ideal humidity levels. He’s since switched to passive atmospheric packaging, which utilizes increasingly popular technology to keep humidity—and sustainability—in mind. “The buckets weren’t letting any moisture out. On top of that, you can imagine how much room 165 five-gallon buckets takes up in a grow space,” Hedrick says.

The same goes for long-term storage. With humidity-controlled bags, operators can rest assured that their product will maintain its efficacy, because as soon as that pack is sealed, the humidity level is guaranteed to stay the same.

Cannabis brand Lava Leaf Organics relies on passive atmospheric packaging for efficient storage—mainly because of the reduction in carbon footprint and increase in terpene preservation.

“When we think about the energy involved in packaging and shipping large amounts of heavy glass jars compared to TerpLoc bags, it was an easy decision for us,” said Lava Leaf Organics CEO Tony Martinez.

“The bags are recyclable, and compared to glass jars with child-resistant lids, they’re much better at preserving terpenes. Using sustainable packaging allows us to put our best foot forward and to better control our customer’s brand experience.”

Tips for making sustainable storage work for you

Sustainable storage is an environmentally-responsible move for the cannabis industry to make, but when weighing the pros and cons of a big switch like this, operators should also keep in mind how positively it will impact their end product, consumer’s experience, and, subsequently, their industry-wide reputation.

Some product packaging examples in the market today

Placing your products in eco-friendly bags is just the start. There are definitely more tips and tricks operators can take advantage of to prolong the use of sustainable materials and ensure they’re leaving as small a footprint as possible. For example, Hedrick’s team reuses their passive atmospheric packaging for maximum efficiency—especially when it comes to bulk storage or curing.

“We mark all of our storage bags with the original strain, so we can reuse that bag for the same strain as long as it passes testing along the way. When I do so, I take a mixture of SaniDate and water to make sure everything is sanitized and clean,” Hedrick said. “That allows me to reuse them for about 3-4 months’ worth of curing and storage. You can reuse a bucket in that same way, but when it’s time to replace it, you’re still spending another $15-$17.”

Sustainable, humidity-controlled packaging is also ideal for testing consistency. If you send in five buckets of the same strain to be tested, you run the risk of them all sitting at wildly different humidity levels, which means some might pass, and others might be rendered trash.

All of the environmental benefits aside, using sustainable packaging just makes cents—literally. “Essentially, I’m saving a minimum of half a million in packaging every year. That’s my entire staff’s salary for two months. That’s incredible, impactful, significant savings that can make a huge difference for a business trying to expand.”

Beyond Compliance: Leveraging Packaging to Build Brand Identity & Loyalty

By Jack Grover
1 Comment

Ten years ago, “cannabis packaging” didn’t extend very far beyond throwing buds into a plastic baggie – in fact, the term wasn’t even really a recognizable category. The lack of product packaging attention-to-detail was understandable at the time; the industry was still predominantly underground, and brands were much more focused on staying afloat amidst global prohibition and crackdowns.

Fast forward to today’s cannabis landscape, and it’s practically unrecognizable. Brands have figured out that, not only is proper cannabis packaging essential for providing consumers with a safe, reliable product, but it offers businesses an inimitable opportunity for marketing to their audience and establishing brand identity.

Because of this, the legal industry has gotten increasingly creative and playful with their packaging, using the space to connect with their audience, leave a lasting mark and obtain that covetable consumer loyalty the retail world is always hungry for.

The beginnings of cannabis packaging: Preserving integrity in a growing market

I entered the cannabis world as a home grower – exclusively for my brother, who has pretty intense cerebral palsy and gets tremendous medicinal relief from the plant. I’ve been growing for him for years, and in my earlier days I found myself losing a lot of cannabis to the elements as time passed: mold, pests, etc. I figured there had to be a better way to preserve what I was cultivating for long-term storage.

After visiting a dispensary in Colorado to get some ideas, I realized all of their packaging was overkill. It didn’t do anything to actually nurture the plant, or give it what it needs for successful lasting preservation. So, I got even more interested.

I started looking into what chemically happens to cannabis after you dry it and I discovered there was no real information on the topic yet. So, my team and I started looking into how we could contribute to this arena – sort of creating this whole new category and awareness around curating, storage, long-term plant viability, shelf life and conditions for quality cannabis.

We looked at a variety of elements for proper packaging – like UV protection, humidity and moisture control, odor control and oxygen control – and worked hard to develop some materials that would factor in all of these considerations for an end-goal that I believe should be universal.

When it comes to cannabis packaging, the most important thing you should be thinking about is integrity throughout the supply chain: delivering products to patients in the way that it was intended to be delivered from the grower for optimal medical results.

Proper packaging is critical for the industry. It contributes to operational efficiency, eliminates waste, maintains full moisture and humidity rates and helps businesses protect their bottom line.

It allows operators to deliver better, more viable and more potent medicine to patients – and that is absolutely what’s most important. Giving patients the full efficacy of the plant, unadulterated and unmolested by the supply chain.

Utilizing cannabis packaging as a powerful marketing tool

That’s how cannabis packaging was first developed – to protect products and keep them safe and effective for consumers. Since then, the sector has totally evolved to encompass even more elements. There’s a lot more education about drying and curing, and how to preserve the integrity of cannabis as it moves from seed to sale.

Brands have also started recognizing a dual opportunity alongside safe cannabis packaging: an effective means for marketing and advertising. In a space where we’re so restricted on how we market our brands, having great packaging is beautiful, convenient and reminds the patient of the brand behind the product they’re currently enjoying.

This is a critical opportunity for brands to cement their reputation and form a relationship between themselves and their clients. “Consumer loyalty” is a magic term that a lot of brands are chasing today, and the biggest way to achieve that is with consistent, high-quality packaging that allows operators to maintain integrity within a supply chain they just can’t control.

Cannabis packaging is the consumer’s first reaction to your product. It’s the plating. And the way it’s presented has a major effect on how customers view your brand. Think of your packaging as a type of billboard: every consumer carrying around a branded bag of your pre-rolls is a walking advertisement and ultimately an ambassador.

The 12-inch vinyl LP cover art of our generation is the one-eighth flower pack. Just like those records are all music, these packages are all cannabis, but these brilliant creatives all over the world are getting to attack an identical canvas with radically-different approaches and aesthetics.

It’s a ubiquitous thing – like designing a watch. From Timex to Rolex, all of these brands have been creating iterations from the same basic layout to do the same basic thing: tell time. That is constraining, but it also pushes people to get really innovative and imaginative.

In the cannabis realm this is just the beginning of utilizing packaging for brand identity and loyalty. Innovating your cannabis packaging provides an incredible framework for seeing different ideas and inspirations come to life. It’s a cannabis collaboration with artists in its most newborn infancy and there’s a lot of exciting potential there. Beyond a billboard and a brand voice, packaging is a keeper of the quality, consistency and potency your customer deserves.

The Top 3 Ways to Find the Right Automation Tools for Your Cannabis Operations

By Nohtal Partansky
No Comments

In an emerging industry like cannabis, there’s always going to be the latest and greatest tool or technology to improve operations that are just in their infancy. In fact, as a cannabis business operator, it’s likely you hear from at least one or two salespeople a week, selling the next best thing to make your operations that much more efficient.

But, not every piece of technology or tool is well-suited for each individual operation. Even more, some solutions are just temporary band-aids and aren’t built for longevity or for the future maturation of the budding industry.

Of course, at a time when cannabis businesses are struggling to even turn a profit – it’s even more important to look at your processes, and automate or optimize what you can to increase your bottom line.

So, how can you make the right decision when it comes to making an investment in automation technology? Keep reading to learn the top 3 tips for successfully vetting automation tools for efficacy, efficiency and cost-effectiveness.

Tip #1 – Identifying what to automate

The goal of streamlining operations with automation technology isn’t to ‘automate anything and everything’. It’s automating the right parts of production to help scale growth and increase profitability. To do so, operators should look at bottlenecks in their production line or process.

An automated pre-roll infusion robot

Once you’ve identified the areas that slow production, it’s time to look at which areas are better candidates for automation than others. For instance, tasks that are highly variable are not ideal for automation. That’s because every time a variance occurs, you’ll spend extra time and effort reconfiguring your automation tool or technology to match.

It’s those bottlenecks in production that are repetitive and don’t vary often that are optimal to increase efficiency. For instance – infusing pre-rolls, filling vape carts or packing master cases would be prime candidates for automation.

To dip your toes into the automated waters – find one of those highly repeatable tasks, purchase a small, cost-effective solution and see just how it impacts productivity. If you see that a small change made a big difference – there’s scalability. After this due diligence, you can move forward in contacting more robust manufacturers for improved equipment designed for long-term use and wide scale implementation.

Tip #2 Choosing the right manufacturer

Speaking of manufacturers – choosing the right one is just as crucial. It shouldn’t come as a shock that not all technology or equipment can be treated equally. If the type of automation technology or equipment you choose is produced by a variety of manufacturers, here are the top things to consider when deciding which is right for you:

  • Customer support – You might think, ‘how hard can it be’ or fall for the sales pitch that a tool or piece of equipment is so easy to implement – reliable, dependable, and accessible support isn’t necessary. But that could not be farther from the truth. When questions or issues arise with the automation technology you choose – you don’t want to lose time, production, or money while you wait for a solution. Even though technology with customer support may cost more upfront, think of it this way. You’ll either pay up now or later. So, what will you choose? Paying a premium from the start to hit the ground running with 5-star equipment, technology and support? Or, saving a couple of bucks now, just to lose time and productivity due to a lack of customer support and lower-quality technology later.
  • Manufacturer experience – In cannabis, most manufacturers come from other fields and lend their experience and skills to new areas of operation and production. That means you’ll want to take a hard look at the team’s core roots and where they come from to understand just how their work will translate. Looking for professionals who are trained in high-tolerance, precision engineering is ideal for automation. Working with teams with this temperament ensures that they typically hold themselves to a high standard. Just remember, the team you’ll work with is a culmination of people who create a result. It all comes down to whether the team you choose has a track record of doing so, and how well they’ve served prior customers, too.
  • Customer reviews – Want to discover how good or bad the team is, beyond what they tell you themselves or before it’s too late? To truly find out, ask their past or current customers.

Tip #3 Learning from others

Of course, looking at successful operations and what they’ve chosen to automate for efficiency always helps, too. So, what is one common area that operators are increasingly optimizing for significant ROI on automation investments and efforts?

Most operations can increase efficiency by automating labeling.

Label applications. Label application is one process that almost any cannabis business can see an immediate return on investment in, across the board. While other areas of automation will vary and rely heavily on your volume, individual bottlenecks, and unique drops in productivity – most cannabis operations can increase efficiency by automating this non-varying, highly repeatable task.

The Final Word Using Automation To Your Advantage 

Automation technology exists for a good reason. It helps cannabis business operators maximize efficiency, stay in compliance, reduce costs over time and, in turn, increase profits. But the wrong automation technology for your processes won’t do anything of the sort. It will only muddy operations, waste precious capital and set you back in the long run.

So use these three tips to find the right automation technology tools, software and solutions to use to your advantage – before your competitors get a leg up.

Perfecting Your Packaging for Cannabis Beverages

By Julie Saltzman
1 Comment

Some consumers participating in the legal cannabis market want to avoid inhalable products. They are concerned about the effects of the smoke or they want their usage to be discreet — without the pungent aroma emanating from burning cannabis flower. For those consumers, edibles are the preferred option and a growing product category.

Within the edibles space, the beverage segment — with limited product options in some states — may offer significant potential for growth. In 2021, cannabis-infused beverages accounted for only 1% of total legal cannabis product sales and about 5% of the edibles segment in the United States, reports market researcher BDSA. But cannabis beverage sales are growing around the U.S.

In California, cannabis drinks grew their market share in the edibles category from 4% in 2018 to 7% in 2021. Nevada saw beverages increase their share of edibles revenues from 7% to 10% in the same time frame. And cannabis beverages’ share of edibles sales in Massachusetts went from less than 1% in 2019 to 8% in 2021.

Pegged at $180 million in revenue last year, the cannabis beverage market is projected to reach nearly $500 million by 2026, predicts BDSA.

Today, gummies and chocolate products dominate the edibles category. Although beverages are currently a small segment of edible sales, they may have some inherent advantages — familiarity, faster-acting products from improved bioavailability, and taste and flavor innovations — over other cannabis products. Since beverages can incorporate many different flavors from fruity, cola and sweet to coffee, tea, sour and bitter, these myriad flavor variations can mask or minimize any off-tastes associated with THC.

Viewed as part of their everyday regimen, consumers drink beverages for hydration, nourishment, refreshment and enjoyment. Cannabis beverages are well-suited for consumers’ lifestyles, while gummies and chocolates may be perceived as sugary treats and special occasion items.

Cruise Beverage B Happy Nitro-Infused CBD Drinks.

Brand owners are beginning to recognize the limited availability of products and growth potential of cannabis-infused beverages and are looking to enter the category. Packaging plays a key role in cannabis beverages, with sustainability, regulatory compliance (e.g., child-resistant), labeling compliance (e.g., warning symbols and text), convenience and branding all contributing to the success of the expanding product category.

Sustainable Packaging

Consumers, especially younger generations, are concerned about the environment and support brands that align with their values. According to the 2020 Sustainable Market Share Index from the NYU Stern Center for Sustainable Business, sustainability-marketed products delivered about 55% of the market growth in consumer packaged goods (CPG) from 2015 to 2019 in the U.S. despite being only 16% of the market. Sustainability-marketed goods grew seven times faster than products not marketed as sustainable and nearly four times faster than the overall CPG market.

As a primary consumer touchpoint, packaging is a good way for cannabis beverage brands to show their commitment to the environment. But finding the most sustainable packaging option for a particular application may not always be as straightforward as it seems. Many considerations are involved — material choice (e.g., plastic, glass, or aluminum), recyclability of the material, the weight of the material, recycled content of the final package, package design (minimalist vs. excessive), transportation costs and other factors like reusability.

To help facilitate the process, Berlin Packaging uses life cycle analysis to determine a product’s environmental impact or carbon footprint over its entire life cycle, including sourcing & raw materials extraction (minerals resource use), manufacturing (energy and water usage), distribution (freight miles, fuel usage) and end-of-life (recovery, recycling, reprocessing).

We have the know-how to improve the sustainability of any packaging material — whether it be lightweighting, use of post-consumer recycled (PCR) content, greater recycling rates and more.

Regulatory Compliance

Because legal cannabis products are regulated by individual states and not at the federal or national level, the regulations for cannabis packaging requirements can vary widely from one state to another. However, there are some common rules that all states follow.

Child-resistant capable cap fits snugly over the top of a can.

All cannabis products — including beverages — require child-resistant packaging to meet the standards of the Consumer Product Safety Commission. For aluminum cans, Berlin Packaging offers a child-resistant capable mechanism that fits snugly over the top of a can. Available in polypropylene or a bio-based resin, the single-use device can be custom developed to fit the exact specifications of the customer’s cans. In-stock products are available for standard 202 can ends.

Along with child-resistant capable packaging, states also require some type of warning symbol and statement on the label to indicate the product contains cannabis. Depending on the state, the symbol may be a triangular or diamond shaped in a bright or contrasting color to call attention to it on the label. The symbol typically houses a cannabis leaf image or “THC”.

Convenience

Like any packaged drink, cannabis beverages need to check all the boxes for consumer convenience — easy to drink, portability, cupholder friendly and resealable.

Users can easily reseal PET and glass bottles with continuous thread or lug finish closures, but cans present a challenge. Berlin Packaging offers a solution with a resealable can that opens like a traditional stay-on-tab. Here’s how it works. Lifting the pull tab breaks the tamper-evident band and unlocks the slider mechanism. Pulling the slider opens the can and makes the familiar venting sound — even after reopening.

The configuration of the opening creates a smooth laminar flow to improve the drinking experience. Moving the slider back to its original position and pushing down the pull tab, which produces a clicking sound, reseal the closure. The tamper-evident band remains on the can underneath the pull tab.

Branding

Cannabis beverages come in drops, shots, syrups, carbonated, iced tea, lemonade, fruity, water, sports & energy, mocktails, tea, coffee and hot cocoa.

Because cannabis has been associated with medicinal uses, many consumers use cannabis products to manage their wellbeing and health. Thus, some cannabis products have been positioned to relieve stress, promote relaxation and sleep, reduce pain and inflammation, improve mental focus, enhance mood or simply for indulgence and enjoyment.

Product positioning and the experience the brand owner wants to create for the consumer can help inform the brand design, personality, and narrative or storytelling. It’s also important that the brand design and messaging resonate with the product’s target audience.

Studio One Eleven, Berlin Packaging’s in-house innovation division, can help cannabis beverage marketers with their product branding from concept to commercialization. We offer market research and consumer insights, brand strategy and visual branding design, brand name development, structural package design, and more. Our services are available at no additional charge in exchange for a customer’s packaging business.

Cruise Beverage distributes nitrogen-infused CBD drinks with all-natural ingredients in 12-oz aluminum cans under the B Happy brand. The team at Studio One Eleven helped Cruise Beverage and its B Happy brand tell their story of free-spirited enjoyment with updated branding, expressive flavor names (i.e., Loosen Up Lemon, Peaceful Pear, Mellow Mango, and Blissful Blood Orange), and unique packaging graphics.

Uplifting illustrations speak to the brand’s sense of freedom and relaxation, and the hand-drawn style reflects the craftsmanship of the CBD beverage product. A white background with flavorful pops of color says clean and fresh, while tiny bubble imagery communicates the delightful effervescence of the fizzy drinks.

Sustainability in Packaging: A Q&A with Dymapak CEO Ross Kirsh

By Aaron G. Biros
No Comments

Ross Kirsh launched Dymapak in New York City in 2010. Born into a family with a storied history in manufacturing, he founded the company after working for several years in Hong Kong where his interests, skills and passions for product development took shape.

Filling a niche for smell-proof bags in smoke shops, the business grew as he immersed himself in cannabis markets around the country. After designing and inventing a patented, first of its kind child-resistant pouch for Colorado’s first adult use sale in 2014, the business has continued to achieve global scale and today is recognized as the worldwide leader in cannabis packaging.

While the cannabis industry has long drawn the ire of environmentalists because of its energy problem when it comes to cultivation, the packaging side of the business faces very similar issues; the cannabis industry also has a plastic problem. In most states where cannabis is legal, state regulations require producers and dispensaries to package all cannabis products in opaque, child-resistant packaging, with several states requiring dispensaries to place entire orders inside large, child-resistant exit bags prior to customers leaving with their purchase.

Dymapak, led by Kirsh, is working on initiatives to help address environmental sustainability in cannabis packaging and turn interest into action industry wide. Ross will offer insights and the business’s action plan at the upcoming Cannabis Packaging Virtual Conference December 1. And ahead of that chat, we caught up with him to learn more.

Aaron G. Biros: Tell me a bit about yourself and how Dymapak came to be. What brought you to the cannabis space and where you are today?

Ross Kirsh, CEO of Dymapak

Ross Kirsh: My family has deep roots in manufacturing. Back in the mid 1970s, my uncle and his brothers all launched separate manufacturing businesses after one of the brothers moved to Hong Kong to open a handbag and luggage factory. The 70s happened to be a unique time to work abroad in Hong Kong given few US companies were operating there when China first announced its open-door policy around 1979. And as you can expect, he became a sourcing agent for many large companies in the US who needed trustworthy boots on the ground.

I went to college, pursued IT and in the back of my mind always knew product development and the manufacturing process was too interesting not to follow. I already knew Hong Kong was ripe for learning entrepreneurship so I went abroad to learn more, and fell in love with the culture, the opportunity and the people.  Immediately after graduation, I moved to Hong Kong. I began working with my family, who taught me the trade – end to end. I helped develop several product lines and lived next to one of our factories in southern China to immerse myself.

After 3.5 years abroad, I began running sales operations back in the US. Fast forward a year back in the states, I had unique customers that owned tobacco and smoke shops telling me that cannabis packaging existed in the market, but not really what everyone was looking for. In truth, the business was born the minute a customer said, “Can you make me a retail ready smell-proof bag?” I figured I could, and the rest – as they say – is history.

What began and was established in 2010 truly took shape at an accelerated pace in 2013, when my relationship with one of the first dispensary owner/operators in Denver – Ean Seeb of Denver Relief – came with a golden opportunity; Invent a child resistant package for cannabis, one did not exist but it was mandated under Colorado’s first-ever recreational cannabis regulations. I spent 7 out of the next 8 weeks in China developing a solution and am proud to say our bag was used in the first recreational sale when Colorado went legal in January 2014. From there, the business grew rapidly, and organically throughout the industry.

Biros: Environmental sustainability is a big issue for cannabis. Not just on the energy intensive side, but particularly when it comes to packaging and its plastic problem. How is your company approaching this issue and are you working on any initiatives to eliminate or reduce plastic waste?

Kirsh: We recognize firsthand the issues that plastic presents. While the material is full of advantages, the disadvantages are both imminent and critical to understand.

What many don’t realize is, for most cannabis packaging that’s recyclable to actually BE recycled, the customer must first find a drop off location, either at a dispensary or elsewhere that accepts the material. The process relies exclusively on the consumer to take action because the products cannot be recycled curbside. And unfortunately, the stats show that very few consumers take the time to bring the packaging back in order to recycle it.

So, yes, we produce recyclable bags in our portfolio, but we really want to get to the source of the problem here – pollution. We looked in a few different areas. And we developed a different bag made with 30% post-consumer resin, meaning 30% is made from reused plastics.

Even more, we recently partnered with a socially conscious, industry leader in the space, Plastic Bank, which builds regenerative, recycling ecosystems in under-developed communities. They work to  collect plastic waste from the ocean – extracting it to ensure its opportunity to enter the recycling ecosystem. Through our partnership with Plastic Bank, we’ll help prevent more than six million plastic bottles from entering the ocean this year alone. And I’m really proud of that.

Biros: Where do you see the cannabis packaging industry going in the next five years?

Kirsh: I think that’s a fascinating question. Sustainability will play a huge role in the future of this market. Just like we are seeing single use plastic bags being phased out across the country, we’ll see that happen to other areas too as part of this larger trend.

I predict more on-time and on-demand needs in the future; the ability to see traceability in real time, similar to the pharmaceutical industry. People will expect batch numbers and lot numbers, with data, in real time. It’ll become central to the business.

Gaining and cultivating trust will be another big hurdle for companies in this sector soon. With federal legalization comes a greater sense of professionalism and more sophistication for the market.

Yet, the continued pressure on environmental sustainability will be the biggest change in the next five years. When you look at sustainability in the packaging industry, paying attention to the format or choice of material should be top of mind. For example, if you’re shipping a glass jar, the amount of space that takes up in a shipping container has a huge impact on the environment, what’s called a hidden impact. One shipping container can hold millions of bags, but you need eight shipping containers for glass jars to get the same amount of storing capacity. That’s about efficiency, which is a bit more hidden, and I hope that consumers will become more and more knowledgeable about what companies are doing to stay environmentally sustainable.

Biros: Ross, thank you very much for your time today.

Kirsh: My pleasure, Aaron.

How the Supply Chain Crisis Impacts Cannabis

By Cannabis Industry Journal Staff
No Comments

Since early 2020, the pandemic has shined a spotlight on the global supply chain and its shortcomings. Supply and demand have changed so much and so quickly that it has fostered shortages and delays for many of the world’s goods.

Much of this crisis is due to manufacturing plants in countries like China working at half-capacity or being forced to shut down to curtail the pandemic. A lot of those shortages can also be blamed on companies with a lack of foresight, choosing to lower costs with thin inventories rather than keeping warehouses full.

The global supply chain crisis has impacted nearly every market on earth that relies on international shipping. Everything from clothing and turkeys to cars and computer chips is in short supply, causing prices and wait times to increase.

John Hartsell, CEO & co-founder of DIZPOT

The cannabis industry is no exception; the supply chain crisis very much so impacts cannabis products getting to consumers. According to John Hartsell, CEO & co-founder of DIZPOT, a cannabis packaging distributor, the worst, when it comes to the supply chain affecting the cannabis market, may still be on its way. “Supply chain issues will continue to be challenging and may even become more challenging for cannabis companies over the next several months due to the holiday season coming up with many packages coming for Christmas, Hanukkah and other holidays,” says Hartsell. Many of those gifts arriving during the holidays are coming from overseas, which further exacerbates any current supply chain backlogs.

John Hartsell will be speaking on this topic and more at the Cannabis Packaging Virtual Conference on December 1. Click here to learn more.Adding to those issues even more is the Chinese New Year coming on February 1, 2022. “The Chinese New Year can often be a three-week downtime for manufacturing in China, causing even more significant delays,” says Hartsell. “Ultimately, these issues are only a problem for organizations that are incapable of planning a logistical timeline that meets demand.”

So how can cannabis companies get ahead of supply chain planning? Hartsell says they are working with customers to establish timelines up to eighteen months out to prevent any disruptions. “We need to stay hyper-focused on logistics, moving freight all over the world, to prevent issues that result from shortsightedness.”

The supply chain crisis impacts nearly every market on earth that relies on international shipping, and cannabis is no exception.

With new markets coming online and legacy cannabis markets expanding, the cannabis supply chain is certainly maturing and this crisis may be kicking things into high gear. In states on the West Coast, distribution channels have expanded, rules have allowed for curbside pickup and delivery and a lot more ancillary businesses are supporting a thriving market.

Still though, the cannabis supply chain falls short in other areas, namely interstate commerce, with the federal government to blame for that. Hartsell expects to see some more interstate commerce in the coming years, and with that comes a much more sophisticated supply chain. He says using logistics software to manage supplies will be the key to continued success.

“Keep the Buds Fresh” – Packaging & Paraphernalia Laws

By Justin T. Starling, Michael C. Tackeff
No Comments

Cannabis law in the U.S. is currently incoherent. What is illegal under the federal laws on the books bears little relation to what is actually happening in cities, states and counties where cannabis is legal for medical and adult use. Although legislators, lawyers and business interests are focused primarily on whether it is legal to buy, sell or grow the cannabis flower itself, the industry’s emergence is also affecting another manufacturing stalwart: packaging. If you can grow it, you can transport it. And if you can transport it, you need a container to sell it in.

As cannabis growers and retailers begin to recognize that attractive, compelling and moisture-retentive packaging can help market and sell their products to a wider audience, packaging companies are presented with an opportunity to expand into this Wild West industry. Seth Rogen is living proof that there is money to be made here: his cannabis company, Houseplant, trades on antique vibes, limited edition releases, celebrity artist sponsorships and old-school tobacco-adjacent products, splashing its unique and charismatic packaging across its website homepage.

But what do packaging industry executives need to know before venturing into the cannabis industry? Although manufacturing packaging that could be used to contain or transport cannabis products is not entirely risk-free, U.S. courts have generally refused in the past to hold manufacturers liable for making products that can be used later as drug paraphernalia. For packaging executives, two questions are of utmost importance. First, could I be held liable for producing drug paraphernalia? And second, what packaging standards must my company follow? This article will address these questions.

Criminal Status of Cannabis Under Federal & State Law 

All cannabis containing more than 0.3% THC remains illegal under federal law and under the laws of many large states, including Texas, Georgia, Tennessee and Iowa. But that’s not the full story. While facilitating cannabis production or trafficking is illegal, the federal government has enforcement priorities and restrictions on its resources. And many state and federal law enforcement officials have little incentive to pursue industries supplying trucks, packaging or lighting to a cannabis retailer in another state, as such products and services are not illegal and can be used for other industrial purposes. No law enforcement official is going to sue Staples for selling paperclips to a cannabis retailer.

Cannabis is still a “Schedule I” substance under the federal Controlled Substances Act, which is defined as substance having a high potential for abuse, no currently accepted medical use in treatment, and no accepted safe use.1 Cannabis was always a poor fit for this definition, given its efficacy in helping oncology patients cope with symptoms like nausea, but its continued classification as a Schedule I substance means that cannabis remains illegal under federal law. Despite this federal illegality, the federal government has little power—legally, practically and politically—to prosecute those engaged in the cannabis industry through activities that are legal under state law.

First, since 2014, Congress has banned the Department of Justice (DOJ) from spending a dime enforcing the federal cannabis law against individuals complying with state medical cannabis law via an appropriations rider.2 Courts have interpreted this language to mean that the DOJ may not prosecute individuals complying with state medical cannabis law,3 although there are still instances where individuals are convicted of violating the federal ban because they were found to have been out of compliance with state law.4 Though the rider only pertains to medical cannabis laws, the federal government has historically treated adult use cannabis regimes by states in a similar way.

Second, from a practical standpoint, no federal agency has the manpower to pursue even a tiny fraction of medical and adult cannabis users who are in compliance with state law, much less the industries providing support, logistics and inventory management. Though the federal ban is still on the books, no one has the power or the money to enforce it. The federal ban is thus becoming a dead letter.

Drug Paraphernalia Laws

Drug paraphernalia laws were written to provide law enforcement with other offenses to charge drug users and producers in addition to simple possession. The idea was to criminalize every aspect of the process of consuming and producing cannabis. While drug paraphernalia laws are written incredibly broadly, courts have been reluctant to apply them to companies producing packaging products.

Most packaging companies would have a defense to a suit alleging they are producing paraphernalia

Federal law explicitly defines drug paraphernalia as “any equipment, product, or material of any kind which is primarily intended or designed for use in manufacturing, compounding, converting, concealing, producing, processing, preparing, injecting, ingesting, inhaling, or otherwise introducing into the human body a controlled substance, possession of which is unlawful under this subchapter.”5 There are 15 categories of items listed as “per se” paraphernalia, including roach clips, electric pipes, and bongs.6 Packaging products do not fit any of the “per se” categories. The statute also specifies that, in determining whether an item constitutes drug paraphernalia, the court must consider “whether the owner, or anyone in control of the item, is a legitimate supplier of like or related items to the community, such as a licensed distributor or dealer of tobacco products[,]” among other factors.7

In addition, federal courts have been reluctant to apply the drug paraphernalia laws to packaging products.8 In addressing the predecessor statute to the current federal paraphernalia law,9 the Second Circuit ordered an indictment dismissed against a producer of glass vials commonly used for crack cocaine: “Since congress in enacting the Paraphernalia Act deliberately omitted ‘packaging’, ‘containing’, and ‘cocaine vials’ from its definition of drug paraphernalia, we conclude that the plastic containers produced by Lin were not ‘drug paraphernalia’ as defined by the act.”10 The law is not uniform, but even if a zealous federal prosecutor wants to crusade against a cannabis supplier, he must contend with the appropriations rider and this adverse case law.

Nevertheless, the federal Controlled Substances Act does allow property used to manufacture narcotics to be seized.11 It is possible that if a company created packaging for cannabis products, and the customer then used that packaging to pack cannabis, the inventory and packaging could be seized by federal law enforcement. But the same obstacles to enforcement discussed above would apply.

Every state has different paraphernalia laws, but most packaging companies would likely have defenses to a suit alleging they are producing or possessing paraphernalia, including lack of intent to use the paraphernalia for illicit purposes and applying federal caselaw as a defense.

Packaging Laws

State law is the primary vehicle for regulatory guidance on cannabis packaging. Any packaging company selling to cannabis retailers will need to consider both state law and federal packaging standards, which are often incorporated by reference into state law.

Federal Packaging Law

Producing a product that complies with all state standards at once might be a challenge, but adhering to individual state rules is doable.

The Poison Prevention Packaging Act is the primary source of child-resistant packaging law.12 This law does not currently apply at all to any sales of cannabis because cannabis is illegal in the eyes of federal law. There is no private right of action under this statute.13 That means that a packaging company cannot be sued by a private individual for violating the statute. At some point, if Congress chooses to loosen restrictions on cannabis, this would be a very easy statute to simply make applicable to sales of cannabis. The law already has a specific provision for liquid nicotine containers.14 But currently, this statute does not apply to cannabis at all.

State Packaging Laws

State laws are a different matter – each state that allows sales of medical or adult use cannabis has enacted different requirements for cannabis packaging. A comprehensive survey of state cannabis packaging law is beyond the scope of this article, but some state cannabis regulatory regimes explicitly incorporate provisions of the federal Poison Prevention Packaging Act.15 California has a similar requirement, as does Washington state.16 Producing a product that complies with all state standards at once (i.e., a “national” standard) might be a challenge. Contracts with buyers could include a representation that the packaging complies only with the laws of state X or Y.

Products Liability Issues

A detailed assessment of products liability is beyond the scope of this article. But in short, as this industry matures, packaging companies undoubtedly will be subject to the usual kinds of products liability issues for cannabis packaging. In other words, in a cannabis-tolerant state, a packaging company could theoretically be sued under a products liability theory if the cannabis is somehow spoiled by a manufacturing defect in the packaging or if the packaging product permits mold to grow and eventually be consumed by a user. Cannabis contract litigation is a complex subject given its unique legal status. One strategy to avoid these issues is to include a very specific dispute resolution procedure (e.g., mediation, arbitration or the like) in any contracts with cannabis companies in the U.S. It is also important to include a waiver of any defenses of the contract being against public policy due to the uncertain legal status of cannabis.

No transaction in the cannabis industry is entirely risk-free, and packaging executives should consult with local counsel in the states in which the packaging is manufactured and in the states in which they intend to sell products to ensure compliance with the law. But this industry is rapidly growing, and opportunity awaits for the packaging companies that are willing to work through the incoherence in the current laws.


References

  1. 21 U.S.C. § 812.
  2. Consolidated Appropriations Act, 2020, Pub. L. No. 116-93, § 531, 133 Stat. 2317, 2431 (Dec. 20, 2019).
  3. United States v. McIntosh, 833 F.3d 1163, 1179 (9th Cir. 2016).
  4. United States v. Trevino, No. 20-1104, 2021 WL 3235751, at *4 (6th Cir. July 30, 2021) (Michigan dispensary owner could never have been in compliance with Michigan’s medical cannabis laws given his prior felony conviction for cocaine possession).
  5. 21 U.S.C. § 863(d); see also generally United States v. Assorted Drug Paraphernalia, 90 F. Supp. 3d 1222, 1229 (D.N.M. 2015).
  6. 21 U.S.C. § 863(d)(1).
  7. 21 U.S.C. § 863(e)(5); see also 21 U.S.C. § 863(f)(2) (specific exemption for items exported or sold through the mail, “and traditionally intended for use with tobacco products, including any pipe, paper, or accessory”).
  8. Posters ‘N’ Things, Ltd. v. United States, 511 U.S. 513, 526 (1994) (“Similarly here, we need not address the possible application of § 857 to a legitimate merchant engaging in the sale of only multiple-use items.”) (head shop case where establishment was devoted substantially to drug paraphernalia).
  9. 21 U.S.C. § 863; see also 511 U.S. at 516 n.5.
  10. United States v. Hong-Liang Lin, 962 F.2d 251, 258 (2d Cir. 1992); see also United States v. Big Apple Bag Co., 306 F. Supp. 2d 331, 334 (E.D.N.Y.), on reconsideration in part, 317 F. Supp. 2d 181 (E.D.N.Y. 2004) (“[T]he Second Circuit has determined that trafficking in items that are used merely to package or contain drugs does not violate 21 U.S.C. § 863.”). But see also United States v. Main St. Distrib. Inc., 700 F. Supp. 655, 659–60 (E.D.N.Y. 1988) (no legitimate market for glass stirrers used in crack pipes, and where customs agent had placed dummy order using common street term for crack pipes; denying company’s motion to suppress).
  11. 21 U.S.C. § 881 (a)(3) (“The following shall be subject to forfeiture to the United States and no property right shall exist in them: All property which is used, or intended for use, as a container for property described in paragraph (1), (2), or (9).”).
  12. 15 U.S.C. § 1471 et seq.; 16 C.F.R. § 1700.20(a)(2)(iii).
  13. Doane v. Metal Bluing Prod., Inc., 568 F. Supp. 744, 746 (N.D.N.Y. 1983).
  14. 15 U.S.C. § 1472a.
  15. See, e.g., Fla. Stat. Ann. § 381.986(8)(e)(11)(e) (“When processing marijuana, a medical marijuana treatment center must: Package the marijuana in compliance with the United States Poison Prevention Packaging Act of 1970, 15 U.S.C. ss. 1471 et seq.”).
  16. Cal. Bus. & Prof. Code § 26120(a) (“Prior to delivery or sale at a retailer, cannabis and cannabis products shall be labeled and placed in a tamper-evident, child-resistant package and shall include a unique identifier for the purposes of identifying and tracking cannabis and cannabis products. If the cannabis or cannabis product contains multiple servings, the package shall also be resealable.”); Cal. Bus. & Prof. Code § 26001(i) (“‘Child resistant’ means designed or constructed to be significantly difficult for children under five years of age to open, and not difficult for normal adults to use properly.”) (identical to federal standard); see also Wash. Admin. Code 314-55-105(2)(b)(i) (all cannabis concentrates must be packaged consistent with the Poison Prevention Packaging Act).

The Importance of Smart Cannabis Packaging

By John Shearman
No Comments

Regardless of their size, all consumer package brands spend a significant amount of money and resources on packaging to attract consumers’ attention. We are all very visually oriented and gravitate to items that pique our interests. Cannabis brands are no exception when it comes to branding their products. Packaging plays a big part in carrying their brand forward and standing out on the dispensary shelves. When I was in Las Vegas at a CBD tradeshow in early 2020, I visited a dispensary, and it was beautiful. I remember commenting to a colleague that was with me how spectacular the product packaging was in the glass cases. One had unique artwork on each different product they offered, and it was indeed art. Yes, I did purchase this one that pulled me in.

The cannabis industry in the United States presents a challenge to brands because there is no overall federal guidance for packaging. Each state is controlling the cannabis legislation and, with it, the packaging guidelines. So multi-state operators (MSOs) have to manage each state as a separate entity and abide by the packaging regulations, which is not very efficient and adds a cost burden. As the industry matures and becomes federally legal across the country, packaging regulations will be easier to implement.

Louis Vuitton bags are one of the many goods that are commonly counterfeited
Image: UK Home Office, Flickr

Let’s take a look at counterfeit products across all product categories. There is a significant global problem with counterfeits, as articulated by the below statistics.

The total global trade in fakes is estimated at around $4.5 trillion. 

Fake luxury merchandise accounts for 60% to 70% of that amount, ahead of pharmaceuticals, entertainment products and representing perhaps a quarter of the estimated $1.2 trillion total trade in luxury goods.

Digital plays a big role in this and perhaps 40% of the sales in luxury fakes take place online.

Customs and Border Patrol confiscated $1.3 billion worth of counterfeit goods in the U.S. for Fiscal Year 2020. (The value of 2020’s seizures are actually down compared to the $1.5 billion worth of counterfeit goods seized by CBP in 2019).

Unfortunately, the figures above are concerning, and the cannabis industry will face the same counterfeit issues that will add to these stats in the future. What can be done to help fight the problem and alleviate the pain for cannabis brands? Smart technology.

The trend towards “smart technology” varies by sector, but the underlying concept involves building levels of technology systems designed to impede or limit the highly sophisticated counterfeiter from replicating or replacing products. These levels typically include a forensic level control on the product, digital systems to track the material and customer facing systems to articulate the underlying value to the consumer.

Building these levels of smart technology into cannabis-products and packaging allows consumers to authenticate real versus fake, and in the case often in cannabis, legal versus illegal. Molecular technology is one forensic level of control option that can be used as a unique identifier for product authentication. Each brand would get its unique identifier to apply to the raw materials that make up its product, such as oil or an isolate. Then a sample can be tested at the origin point and subsequent nodes in the supply chain using a remote testing device. All the digital data is captured in a secure cloud database for traceability and transparency to the end consumer, to show them the authenticity of the product they are consuming. The same molecular technology can be applied to the ink or varnish for packaging and labels. A great application to help combat counterfeits and product diversion across the globe.

Counterfeiters can create near duplicate versions of the original

Another engaging platform is called StrainSecure by TruTrace Technologies. Their SAAS platform allows cannabis manufacturers to track all their product batches and SKUs tied to a blockchain. It also facilitates the interaction between the manufacturer and third-party testing facilities to conduct product testing and reporting. The data is captured within the platform, and with easy access dashboard views, it provides the insights to authenticate products at any time.

A company out of Australia called Laava is producing a product called Smart Fingerprints. It’s the next evolution of QR codes. The Smart Fingerprints can be applied to each package, providing a unique identifier that consumers can read with a mobile phone application. The consumer is provided with information concerning the product’s authenticity and any additional information the brand wants to share with the user. Smart Fingerprints are a great example of customer engagement at the point of activity that is secure.

The above three solutions show the availability of advanced technologies the cannabis industry can implement on its packaging and products to ensure authentic and safe products are sold to consumers. It provides consumers with vital information and insights about products so they can make informed buying decisions. There is no one silver bullet solution that provides all the answers. As with every high value product, counterfeiters will work to create near duplicate versions of the original until it becomes unsustainable to do so. It will take a technology ecosystem to seamlessly connect and provide actuate and timely information between supply chain partners and ultimately the end consumer. As the US works to separate the legal from illegal production for both the adult use and medical supply of cannabis, the looming challenge will be on protecting and communicating authenticity, packaging will be the first step in this.

CBD Blending, Transportation & Supply – How Sustainable Manufacturing Can Improve Your Cost-Efficiency at all Stages

By Rachel Morgan
No Comments

Environmentally conscious manufacturing has never been more important; for the survival of both the planet and your business. The internet makes CBD product comparisons quick and efficient, so consumers can interrogate every aspect of your product and processes before deciding to make a purchase. Sustainability credentials are now a primary decision making factor for your customers.

Water jacketed vessels are a cost-effective way of achieving more consistent blends than is possible manually

For business of all sizes, improving resource use and efficiency is a great place to start. This will reduce waste and improve your environmental impact, and has the added benefit of improving your return on investment!

I always recommend investing in stainless steel equipment for manufacturing and distributing CBD oils. Stainless steel is one of the most environmentally efficient raw materials, because of its durability and ability to be recycled. Vessels last an extremely long time, and even once their service life is over, they should never enter the waste stream. Many of our US customers transport their CBD products around the world in stainless steel vessels, which can then either be shipped back for re-use, or re-used at the recipient site.

In terms of finding your ideal equipment supplier, those who have won awards for their environmental initiatives are the cream of the crop; they can be a real asset to your business and will often collaborate on sustainability-themed social content, which is really valuable to get in front of your customers.

Once you’ve investigated the credentials of suitable suppliers, how do you make sure their blending equipment will perfectly meet your needs?

Here are my recommended four points for consideration:

  1. Adding Toggle Clamps keeps your products airtight and reduces the chance of contamination in transit

    Vessel Capacity: Vessel capacity must be considered in two ways; maximum and minimum working capacity. Standard vessels have their capacity listed as ‘brim full’ – suppliers tell you the total overall volume of space in the vessel. However, maximum capacity must allow for 10-20% free space below ‘brim full’, so that if product is being mixed and stirred, there is no overspill. For example; to blend 75L batches of CBD oil, it’s generally recommended to purchase a 100L mixing vessel.

  2. Vessel Bottom Shape: Standard vessels have flat bottoms, which makes it difficult to drain them to completely empty. An experienced supplier such as Pharma Hygiene Products has the capability to modify standard vessels, to include a sloped bottom at 3 degrees, which reduces leftover product pooling when draining your oils. Vessels can also be custom-made with a cone or dish shaped bottom, whereby a valve can be positioned in the centre of the base to allow full draining, to reduce waste and increase profitability.
  3. Stainless Steel Grade: Stainless steel blending vessels for CBD oils are generally offered in 304 or 316L pharmaceutical-grade material. A simple description of the difference is that 316L grade contains an extra 2% molybdenum, for additional corrosion-resistance. Increased regional and interna­tional legislation concerning CBD products has come hand-in-hand with tighter interrogation of hygiene practices. Contaminant-free materials such as stainless steel are ideal to ensure international pharma-quality compliance for your business’ blending processes. Critically, at Pharma Hygiene Products a comprehensive range of compliance certification is available to confirm the grade of material, to prove surface smoothness, and to guarantee that no cross-contamination from BSE or CJD diseases occurs.

    Hygienic stainless steel CBD storage & transportation vessels
  4. Lastly, don’t forget to let your supplier know in advance if you have any special requirements for your product or vessel. Some common examples include:
  • Flammable product components – Requiring ATEX certified blending equipment.
  • Temperature control – Adding a water jacket to your vessel is a simple solution for heating, cooling or maintaining the temperature of your product as it blends.
  • Toggles and seals – For airtight, contaminant-free transportation.
  • Viewing holes – For easy visual inspection whilst blending.

Your equipment supplier can be a real financial and reputational asset, so be sure to do your homework before making an investment!