Tag Archives: plastic

Sustainability in Cannabis Packaging: Balancing Preservation and Environmental Impact

By Jack Grover
No Comments

Even a cursory review of cannabis reveals that the market has been notoriously wasteful, polluting the environment with chemical fertilizers, misused pesticides, contaminated plants, and—perhaps most problematically—thoughtlessly excessive packaging.

The industry is in dire need of sustainable practices, and the easiest way to start an impactful new trend is from the outside in: a.k.a., adjusting how you’re parceling your products.

Honing in on sustainable packaging isn’t just a good move for the environment. It’s also more cost-effective, less labor-intensive and allows you to provide consumers with the best possible version of your flower—no matter how far through the supply chain it’s had to travel before hitting retail shelves.

Cannabis has progressed: It’s time for its packaging to do the same

By the time legalization began sweeping the nation, the industry already had several decades of experience operating underground. With that discretion came a lot of built-in habits around not attracting attention, and for packaging, the focus was solely on not looking like a cannabis product.

An overabundance of plastic isn’t cutting it anymore—not only when it comes to environmental friendliness, but for the integrity of the product itself.

Today, increased legalization grants operators the freedom to expand without the fear of being seen, and as a result, there’s no longer any excuse for wasteful packaging to be the industry’s norm. Glass jars, Ziplocks and an overabundance of plastic isn’t cutting it anymore—not only when it comes to environmental friendliness, but for the integrity of the product itself.

“I’ve been designing packaging in the cannabis industry since 2013, and a lot of trends have come and gone. We used to put flower in plastic Rx jars and paper envelopes. In general, there was a lot of waste: excess boxes and jars that all get thrown away,” says Legacy’s Chief Cannabis Officer Ryan Hedrick. “And when consumers pull the products out of those containers, your marketing doesn’t remain intact. The box gets thrown away, and now they’re just carrying around a labelless jar. Not only is it bad for the environment, but it isn’t helping you promote your brand at all.”

How sustainable storage optimizes curing and shelf life of flower

As for the curing process, Hedrick used to use airtight buckets, which both took up a lot of room and wasn’t at all effective for maintaining cannabis’s ideal humidity levels. He’s since switched to passive atmospheric packaging, which utilizes increasingly popular technology to keep humidity—and sustainability—in mind. “The buckets weren’t letting any moisture out. On top of that, you can imagine how much room 165 five-gallon buckets takes up in a grow space,” Hedrick says.

The same goes for long-term storage. With humidity-controlled bags, operators can rest assured that their product will maintain its efficacy, because as soon as that pack is sealed, the humidity level is guaranteed to stay the same.

Cannabis brand Lava Leaf Organics relies on passive atmospheric packaging for efficient storage—mainly because of the reduction in carbon footprint and increase in terpene preservation.

“When we think about the energy involved in packaging and shipping large amounts of heavy glass jars compared to TerpLoc bags, it was an easy decision for us,” said Lava Leaf Organics CEO Tony Martinez.

“The bags are recyclable, and compared to glass jars with child-resistant lids, they’re much better at preserving terpenes. Using sustainable packaging allows us to put our best foot forward and to better control our customer’s brand experience.”

Tips for making sustainable storage work for you

Sustainable storage is an environmentally-responsible move for the cannabis industry to make, but when weighing the pros and cons of a big switch like this, operators should also keep in mind how positively it will impact their end product, consumer’s experience, and, subsequently, their industry-wide reputation.

Some product packaging examples in the market today

Placing your products in eco-friendly bags is just the start. There are definitely more tips and tricks operators can take advantage of to prolong the use of sustainable materials and ensure they’re leaving as small a footprint as possible. For example, Hedrick’s team reuses their passive atmospheric packaging for maximum efficiency—especially when it comes to bulk storage or curing.

“We mark all of our storage bags with the original strain, so we can reuse that bag for the same strain as long as it passes testing along the way. When I do so, I take a mixture of SaniDate and water to make sure everything is sanitized and clean,” Hedrick said. “That allows me to reuse them for about 3-4 months’ worth of curing and storage. You can reuse a bucket in that same way, but when it’s time to replace it, you’re still spending another $15-$17.”

Sustainable, humidity-controlled packaging is also ideal for testing consistency. If you send in five buckets of the same strain to be tested, you run the risk of them all sitting at wildly different humidity levels, which means some might pass, and others might be rendered trash.

All of the environmental benefits aside, using sustainable packaging just makes cents—literally. “Essentially, I’m saving a minimum of half a million in packaging every year. That’s my entire staff’s salary for two months. That’s incredible, impactful, significant savings that can make a huge difference for a business trying to expand.”

Perfecting Your Packaging for Cannabis Beverages

By Julie Saltzman
1 Comment

Some consumers participating in the legal cannabis market want to avoid inhalable products. They are concerned about the effects of the smoke or they want their usage to be discreet — without the pungent aroma emanating from burning cannabis flower. For those consumers, edibles are the preferred option and a growing product category.

Within the edibles space, the beverage segment — with limited product options in some states — may offer significant potential for growth. In 2021, cannabis-infused beverages accounted for only 1% of total legal cannabis product sales and about 5% of the edibles segment in the United States, reports market researcher BDSA. But cannabis beverage sales are growing around the U.S.

In California, cannabis drinks grew their market share in the edibles category from 4% in 2018 to 7% in 2021. Nevada saw beverages increase their share of edibles revenues from 7% to 10% in the same time frame. And cannabis beverages’ share of edibles sales in Massachusetts went from less than 1% in 2019 to 8% in 2021.

Pegged at $180 million in revenue last year, the cannabis beverage market is projected to reach nearly $500 million by 2026, predicts BDSA.

Today, gummies and chocolate products dominate the edibles category. Although beverages are currently a small segment of edible sales, they may have some inherent advantages — familiarity, faster-acting products from improved bioavailability, and taste and flavor innovations — over other cannabis products. Since beverages can incorporate many different flavors from fruity, cola and sweet to coffee, tea, sour and bitter, these myriad flavor variations can mask or minimize any off-tastes associated with THC.

Viewed as part of their everyday regimen, consumers drink beverages for hydration, nourishment, refreshment and enjoyment. Cannabis beverages are well-suited for consumers’ lifestyles, while gummies and chocolates may be perceived as sugary treats and special occasion items.

Cruise Beverage B Happy Nitro-Infused CBD Drinks.

Brand owners are beginning to recognize the limited availability of products and growth potential of cannabis-infused beverages and are looking to enter the category. Packaging plays a key role in cannabis beverages, with sustainability, regulatory compliance (e.g., child-resistant), labeling compliance (e.g., warning symbols and text), convenience and branding all contributing to the success of the expanding product category.

Sustainable Packaging

Consumers, especially younger generations, are concerned about the environment and support brands that align with their values. According to the 2020 Sustainable Market Share Index from the NYU Stern Center for Sustainable Business, sustainability-marketed products delivered about 55% of the market growth in consumer packaged goods (CPG) from 2015 to 2019 in the U.S. despite being only 16% of the market. Sustainability-marketed goods grew seven times faster than products not marketed as sustainable and nearly four times faster than the overall CPG market.

As a primary consumer touchpoint, packaging is a good way for cannabis beverage brands to show their commitment to the environment. But finding the most sustainable packaging option for a particular application may not always be as straightforward as it seems. Many considerations are involved — material choice (e.g., plastic, glass, or aluminum), recyclability of the material, the weight of the material, recycled content of the final package, package design (minimalist vs. excessive), transportation costs and other factors like reusability.

To help facilitate the process, Berlin Packaging uses life cycle analysis to determine a product’s environmental impact or carbon footprint over its entire life cycle, including sourcing & raw materials extraction (minerals resource use), manufacturing (energy and water usage), distribution (freight miles, fuel usage) and end-of-life (recovery, recycling, reprocessing).

We have the know-how to improve the sustainability of any packaging material — whether it be lightweighting, use of post-consumer recycled (PCR) content, greater recycling rates and more.

Regulatory Compliance

Because legal cannabis products are regulated by individual states and not at the federal or national level, the regulations for cannabis packaging requirements can vary widely from one state to another. However, there are some common rules that all states follow.

Child-resistant capable cap fits snugly over the top of a can.

All cannabis products — including beverages — require child-resistant packaging to meet the standards of the Consumer Product Safety Commission. For aluminum cans, Berlin Packaging offers a child-resistant capable mechanism that fits snugly over the top of a can. Available in polypropylene or a bio-based resin, the single-use device can be custom developed to fit the exact specifications of the customer’s cans. In-stock products are available for standard 202 can ends.

Along with child-resistant capable packaging, states also require some type of warning symbol and statement on the label to indicate the product contains cannabis. Depending on the state, the symbol may be a triangular or diamond shaped in a bright or contrasting color to call attention to it on the label. The symbol typically houses a cannabis leaf image or “THC”.

Convenience

Like any packaged drink, cannabis beverages need to check all the boxes for consumer convenience — easy to drink, portability, cupholder friendly and resealable.

Users can easily reseal PET and glass bottles with continuous thread or lug finish closures, but cans present a challenge. Berlin Packaging offers a solution with a resealable can that opens like a traditional stay-on-tab. Here’s how it works. Lifting the pull tab breaks the tamper-evident band and unlocks the slider mechanism. Pulling the slider opens the can and makes the familiar venting sound — even after reopening.

The configuration of the opening creates a smooth laminar flow to improve the drinking experience. Moving the slider back to its original position and pushing down the pull tab, which produces a clicking sound, reseal the closure. The tamper-evident band remains on the can underneath the pull tab.

Branding

Cannabis beverages come in drops, shots, syrups, carbonated, iced tea, lemonade, fruity, water, sports & energy, mocktails, tea, coffee and hot cocoa.

Because cannabis has been associated with medicinal uses, many consumers use cannabis products to manage their wellbeing and health. Thus, some cannabis products have been positioned to relieve stress, promote relaxation and sleep, reduce pain and inflammation, improve mental focus, enhance mood or simply for indulgence and enjoyment.

Product positioning and the experience the brand owner wants to create for the consumer can help inform the brand design, personality, and narrative or storytelling. It’s also important that the brand design and messaging resonate with the product’s target audience.

Studio One Eleven, Berlin Packaging’s in-house innovation division, can help cannabis beverage marketers with their product branding from concept to commercialization. We offer market research and consumer insights, brand strategy and visual branding design, brand name development, structural package design, and more. Our services are available at no additional charge in exchange for a customer’s packaging business.

Cruise Beverage distributes nitrogen-infused CBD drinks with all-natural ingredients in 12-oz aluminum cans under the B Happy brand. The team at Studio One Eleven helped Cruise Beverage and its B Happy brand tell their story of free-spirited enjoyment with updated branding, expressive flavor names (i.e., Loosen Up Lemon, Peaceful Pear, Mellow Mango, and Blissful Blood Orange), and unique packaging graphics.

Uplifting illustrations speak to the brand’s sense of freedom and relaxation, and the hand-drawn style reflects the craftsmanship of the CBD beverage product. A white background with flavorful pops of color says clean and fresh, while tiny bubble imagery communicates the delightful effervescence of the fizzy drinks.

There’s More to Sustainable Packaging than Meets the Eye

By Balaji Jayaseelan
No Comments

People today are more eco-conscious than ever. The last several years have seen a growing awareness of the impact of human behavior on the environment, and COVID-19 brought real-life context to the catastrophic effects of a global crisis. Lifestyle changes during the pandemic empowered people to make choices with a positive impact for the collective good. In a June 2021 PricewaterhouseCoopers survey , half of global consumers said they’ve become more eco-friendly since the COVID-19 pandemic. Consumers are changing their behaviors, educating themselves about the businesses they support, and evaluating the products they buy through a “green” lens. Terms like circular economy, zero-waste, ESG and carbon footprint are now part of the common vernacular, and sustainability is no longer a nice-to-have but a business imperative.

Cannabis consumers, in particular, value sustainability. They are conscientious of what they’re putting into their bodies and the planet. There is increased interest in brands and businesses that use responsible growing practices, eco-efficient manufacturing, and sustainable packaging. In a nationwide survey conducted by Canivate Growing Systems, 79% of U.S. cannabis consumers said they support establishing environmental standards. And in 2021, the Sustainable Cannabis Coalition (SCC) was formed to promote sustainability best practices.

Sustainable packaging is an important way that brands can show a commitment to the environment. Packaging is a highly visible and tangible representation of your brand and one that matters to consumers. A July 2021 Adweek/Morning Consult poll found that 77% of consumers believe it is the brand owners’ responsibility to make sure their packaging is recyclable. According to Nielsen, of the top five sustainability attributes consumers are willing to pay more for, three are packaging-focused: Recycled packaging, reduced packaging and reusable packaging. While cannabis packaging has unique regulatory requirements and safety guidelines, it can still be eco-friendly. Sustainable cannabis packaging has the necessary properties to protect against moisture and maintain freshness and smell. It can also be child-resistant and include other unique cannabis functionalities.

Image: Nielsen, 2019

When it comes to sustainable cannabis packaging, that which you may believe to be the “greenest” option may not be sustainable at all. Many factors go into this determination, including packaging material, weight, distance traveled from supplier to manufacturer, water and energy usage and more. At Berlin Packaging , we take a comprehensive and integrated approach to sustainability to ensure our solutions meet customer objectives and consumer expectations. We use life-cycle analysis to quantify a product’s environmental impact throughout its entire life cycle, including sourcing/raw materials extraction, manufacturing, distribution and end-of-life. This analysis ensures that the solutions we provide are effective, impactful, and don’t contribute to greenwashing.

One key pillar of sustainable cannabis packaging is material circulation – using recycled and recyclable plastics and alternative materials. It’s important to understand that not all plastics are created equal. HDPE and PET are fully recyclable and have a ~30% recyclability rate. Polypropylene, on the other hand, while recyclable, only has roughly a 3% recyclability rate. Color can also play a role. PET is valued for its transparency, so colored and opaque plastics are not considered recyclable.

Continuous innovation and technological improvements have contributed to several eco-friendlier plastic packaging solutions. One popular choice for many of today’s brands is post-consumer recycled (PCR) materials. Using recycled plastic reduces single-use plastic waste that fills our landfills and threatens our waterways. Bio-plastics, made using renewable plant-based materials, are another sustainable option. Berlin Packaging has partnered with numerous premium packaging manufacturers to provide sustainable solutions for our customers. Many of our offerings – suitable for flower, pre-rolls, edibles, concentrates and more – can be produced using PCR or bio-plastics.

Material circulation means using recycled and recyclable plastics and alternative materials.

We’re also seeing brands embrace new compostable, biodegradable and paper packaging options. Berlin Packaging offers pre-roll tubes that are 100% compostable in industrial or municipal facilities and are better for the environment while also protecting the product inside. With zero migration, zero odor, and zero visibility, these air-tight tubes maintain freshness and meet regulatory requirements. We also offer a variety of paper tubes for pre-rolls, vape carts, and flower that are reusable, recyclable, and biodegradable.

Other sustainable packaging strategies include refill & reuse systems, which have gained popularity over the past several years, especially among personal care categories. Other tactics to consider when evaluating your package’s sustainability scorecard are eliminating unneeded packaging components like outer wraps and neck seals, ensuring labels are recyclable, and lightweighting (reducing the weight of your package). Berlin Packaging evaluates all of these avenues when developing sustainable packaging solutions.

Beyond the packaging itself, we encourage our customers to consider aligning their branding design and on-pack messaging to tell their sustainability story. We’re seeing many brands elevate their packaging sustainability benefits on their packaging’s primary display panel. The How2Recycle labeling program is another tool that helps educate consumers about how to dispose of packaging to ensure it gets recycled properly. Berlin Packaging’s sustainability specialists assist companies with comprehensive messaging strategies. Given the rise of greenwashing and consumer confusion and skepticism, effective and impactful messaging is a critical part of a sustainable packaging strategy.

Working with packaging suppliers and design partners who understand the cannabis market and have sustainability expertise is key to a brand’s success. A holistic approach that considers consumer insights, design functionality, aesthetics, manufacturability, regulatory requirements and sustainability results in packaging solutions that grow sales and build brand loyalty.

The Do’s and Don’ts of Cannabis Labeling

By Jon Bernard
No Comments

As more states legalize the use of cannabis for both medicinal and adult use, the market is growing exponentially. For growers and dispensaries, that means bringing their ‘A’ game when it comes to marketing their cannabis products – and that includes labels.

Not only do your cannabis labels need to be compliant with regulations, but you also need to make sure they stand out from the competitors. However, while creating a label seems like it should be easy, it can be a challenge to navigate the complex and murky legal landscape.

But don’t worry, we’ve got your back! Let’s take a look at the key federal regulations you need to be aware of, what NOT to put on cannabis labels and expert advice to help you find the perfect label material for your brand. Let’s get started.

Cannabis Labeling Requirements: What You Need to Know 

As of now, cannabis has not been ruled legal in all 50 states. However, states where cannabis is legalized determine their own set of rules and guidelines. These legislative guidelines are constantly being updated and revised for the labeling and packaging of cannabis products, so staying compliant can be challenging for dispensaries and manufacturers.

It’s important to follow general federal regulations for your product, such as the nutrition facts section (Image: TEKLYNX)

Since packaging laws vary by state, it’s important to follow general federal regulations for your product, as well as check your state for cannabis-specific label requirements.

At the very least, you should understand and follow cannabis labeling regulations in accordance with the Federal Food, Drug, and Cosmetics Act (FDCA). Let’s dive right into the basic elements that FDCA requires when labeling cannabis products.

  • Name and Location of Business: It is critical to always include the name and location of your business on both the inner and outer information panel. In doing so, customers always have a way to contact you for any questions. If you are worried about taking up too much space, a QR code is a great way to offer additional information.
  • Product Identity: Is your product meant to be used for adult or medicinal use? You must include what your cannabis product is or does on the Product Display Panel (PDP) so it’s easy for customers to locate.
  • Net Quantity of Contents: Net quantity refers to the total weight or volume of a finished product (excluding packaging) and is federally mandated on labels. For packaged liquid cannabis products, net quantity should be labeled in fluid measure. Meanwhile, packaged solid, semi-solid and viscous cannabis products should be labeled in dry weight.
  • Warning Statements: Since cannabis is still listed as a Schedule 1 Controlled Substance, it’s recommended to include warning statements for the specific product types. For example, the warning statement should stay “for medical use only” for all medical cannabis products.
  • List of Ingredients: You must include a complete declaration of all ingredients in your cannabis product. This must be listed on the informational panel on the outer packaging. If there is no outer packaging, then it must be placed on the product package itself.
  • Disclosure of Critical Facts: In general, this includes critical information that customers would want to know when buying your product. This can include:
    • Suggested use for the product
    • Application instructions
    • Expiration date 

What NOT To Put On a Cannabis Label

Proper cannabis labeling can ensure you remain compliant with regulations and legal requirements. Without compliance, you won’t be able to sell your products and could lead to a hefty fine – and nobody wants that! Here are the things you should stay away from adding to your label:

Unapproved Health Claims: As of now, both federal law and state laws do not recognize cannabis as a dietary supplement or substance that can help prevent, cure or treat serious diseases. For that reason, your safest bet is to stay away from making any false health claims on labels and websites.

An example of a cannabis flower label in Oregon with all of the required information.

Obscured Fonts: Text and font issues can muddle the look of your cannabis label and land you into compliance issues. Most states require cannabis labels to have a font and text size that is prominent, clear and easy to read for information panels. Therefore, it is critical to find typography that showcases your brand while maintaining compliance with federal and state regulations.

Faulty Ingredient List: Cannabis labels must accurately include the types of compounds present, it’s percentage and dosage found in the product. Plus, it is required that all cannabis products include cannabinoid profiles and provide a list of any active ingredients.

Considerations for Labeling Materials

To cut through the noise in a highly competitive retail environment, it’s critical to carefully consider the label materials for your cannabis product. Here are some things to consider.

Label Material Choice: Polypropylene or Paper

Take into account what your cannabis product is (tincture, gummies, etc.) when choosing your label material. For example, if it’s a liquid cannabis product, your label can come into contact with the liquid itself, causing damage and risk the label falling off over time. For that reason, the polypropylene label would be the better choice because it’s waterproof, oil-resistant and offers more durability. On the other hand, if your cannabis product does not require a lot of protection and you are looking for a more affordable option, then paper labels would be the better option.

Coating Choice: Matte or Glossy

Choosing between matte or glossy finish depends on your preferred brand aesthetic. If you are looking to dazzle some customers and have a vibrant design on your cannabis label, then it’s best to choose a glossy finish because it holds the ink better. As a result, your label design will appear striking and crisp when printed! But, maybe that’s not the vibe of your cannabis brand so you’re looking for something more traditional. If so, a matte finish is a better choice because it absorbs some of the ink – producing that vintage, distressed look!

Final Thoughts

Your cannabis products deserve to stand out and shine in this booming market. But your product won’t even make it to the market if you are not following label requirements. Proper cannabis labeling ensures that the product is compliant, builds trust with your customers and boosts your credibility within the space. Since requirements are constantly evolving in this new industry, you must always triple-check with both federal and state regulations for the most up-to-date information in regards to cannabis product labeling. In doing so, you’ll be able to design an enticing package with proper labels that will earn heart eyes from consumers, while providing essential information about your product.

Sustainability in Packaging: A Q&A with Dymapak CEO Ross Kirsh

By Aaron G. Biros
No Comments

Ross Kirsh launched Dymapak in New York City in 2010. Born into a family with a storied history in manufacturing, he founded the company after working for several years in Hong Kong where his interests, skills and passions for product development took shape.

Filling a niche for smell-proof bags in smoke shops, the business grew as he immersed himself in cannabis markets around the country. After designing and inventing a patented, first of its kind child-resistant pouch for Colorado’s first adult use sale in 2014, the business has continued to achieve global scale and today is recognized as the worldwide leader in cannabis packaging.

While the cannabis industry has long drawn the ire of environmentalists because of its energy problem when it comes to cultivation, the packaging side of the business faces very similar issues; the cannabis industry also has a plastic problem. In most states where cannabis is legal, state regulations require producers and dispensaries to package all cannabis products in opaque, child-resistant packaging, with several states requiring dispensaries to place entire orders inside large, child-resistant exit bags prior to customers leaving with their purchase.

Dymapak, led by Kirsh, is working on initiatives to help address environmental sustainability in cannabis packaging and turn interest into action industry wide. Ross will offer insights and the business’s action plan at the upcoming Cannabis Packaging Virtual Conference December 1. And ahead of that chat, we caught up with him to learn more.

Aaron G. Biros: Tell me a bit about yourself and how Dymapak came to be. What brought you to the cannabis space and where you are today?

Ross Kirsh, CEO of Dymapak

Ross Kirsh: My family has deep roots in manufacturing. Back in the mid 1970s, my uncle and his brothers all launched separate manufacturing businesses after one of the brothers moved to Hong Kong to open a handbag and luggage factory. The 70s happened to be a unique time to work abroad in Hong Kong given few US companies were operating there when China first announced its open-door policy around 1979. And as you can expect, he became a sourcing agent for many large companies in the US who needed trustworthy boots on the ground.

I went to college, pursued IT and in the back of my mind always knew product development and the manufacturing process was too interesting not to follow. I already knew Hong Kong was ripe for learning entrepreneurship so I went abroad to learn more, and fell in love with the culture, the opportunity and the people.  Immediately after graduation, I moved to Hong Kong. I began working with my family, who taught me the trade – end to end. I helped develop several product lines and lived next to one of our factories in southern China to immerse myself.

After 3.5 years abroad, I began running sales operations back in the US. Fast forward a year back in the states, I had unique customers that owned tobacco and smoke shops telling me that cannabis packaging existed in the market, but not really what everyone was looking for. In truth, the business was born the minute a customer said, “Can you make me a retail ready smell-proof bag?” I figured I could, and the rest – as they say – is history.

What began and was established in 2010 truly took shape at an accelerated pace in 2013, when my relationship with one of the first dispensary owner/operators in Denver – Ean Seeb of Denver Relief – came with a golden opportunity; Invent a child resistant package for cannabis, one did not exist but it was mandated under Colorado’s first-ever recreational cannabis regulations. I spent 7 out of the next 8 weeks in China developing a solution and am proud to say our bag was used in the first recreational sale when Colorado went legal in January 2014. From there, the business grew rapidly, and organically throughout the industry.

Biros: Environmental sustainability is a big issue for cannabis. Not just on the energy intensive side, but particularly when it comes to packaging and its plastic problem. How is your company approaching this issue and are you working on any initiatives to eliminate or reduce plastic waste?

Kirsh: We recognize firsthand the issues that plastic presents. While the material is full of advantages, the disadvantages are both imminent and critical to understand.

What many don’t realize is, for most cannabis packaging that’s recyclable to actually BE recycled, the customer must first find a drop off location, either at a dispensary or elsewhere that accepts the material. The process relies exclusively on the consumer to take action because the products cannot be recycled curbside. And unfortunately, the stats show that very few consumers take the time to bring the packaging back in order to recycle it.

So, yes, we produce recyclable bags in our portfolio, but we really want to get to the source of the problem here – pollution. We looked in a few different areas. And we developed a different bag made with 30% post-consumer resin, meaning 30% is made from reused plastics.

Even more, we recently partnered with a socially conscious, industry leader in the space, Plastic Bank, which builds regenerative, recycling ecosystems in under-developed communities. They work to  collect plastic waste from the ocean – extracting it to ensure its opportunity to enter the recycling ecosystem. Through our partnership with Plastic Bank, we’ll help prevent more than six million plastic bottles from entering the ocean this year alone. And I’m really proud of that.

Biros: Where do you see the cannabis packaging industry going in the next five years?

Kirsh: I think that’s a fascinating question. Sustainability will play a huge role in the future of this market. Just like we are seeing single use plastic bags being phased out across the country, we’ll see that happen to other areas too as part of this larger trend.

I predict more on-time and on-demand needs in the future; the ability to see traceability in real time, similar to the pharmaceutical industry. People will expect batch numbers and lot numbers, with data, in real time. It’ll become central to the business.

Gaining and cultivating trust will be another big hurdle for companies in this sector soon. With federal legalization comes a greater sense of professionalism and more sophistication for the market.

Yet, the continued pressure on environmental sustainability will be the biggest change in the next five years. When you look at sustainability in the packaging industry, paying attention to the format or choice of material should be top of mind. For example, if you’re shipping a glass jar, the amount of space that takes up in a shipping container has a huge impact on the environment, what’s called a hidden impact. One shipping container can hold millions of bags, but you need eight shipping containers for glass jars to get the same amount of storing capacity. That’s about efficiency, which is a bit more hidden, and I hope that consumers will become more and more knowledgeable about what companies are doing to stay environmentally sustainable.

Biros: Ross, thank you very much for your time today.

Kirsh: My pleasure, Aaron.

Drug Plastics & Glass Launches Carbon Footprint Tool

By Cannabis Industry Journal Staff
No Comments

According to a press release, Drug Plastics & Glass, a packaging company that specializes in cannabis bottles and closures, announced new tools for their customers to calculate their carbon footprint. The company launched six new sustainability calculators with the goal to help their customers get more informed about their carbon footprint.

According to Jeff Johnson, director of marketing and business development for Drug Plastics, they want to show how small, incremental changes can have a lasting impact on a company’s environmental sustainability.“From switching to more eco-friendly resin and eliminating flame treatment, to calculating the savings gained from choosing PET plastic over glass, or eliminating collateral packaging, these calculators show how making simple changes can have a big impact on the environment,” says Johnson.

Here are some of their sustainability calculators they recently launched:

  • PCR PET Resin Sustainability Calculator: Reduce greenhouse gases by making new products from PCR PET removes plastic from the environment by converting PET plastic discarded by the consumer back into resin that can be used again.
  • Flaming Elimination Calculator: Conserve fossil fuels by opting out of the flame treatment process traditionally used to ensure water-based adhesive labels and silk screening would adhere properly to HDPE, LDPE, and PP bottles. Today, this is not always necessary.*
  • Bag Reduction Calculator: Determine the individual savings when you move to single bagging instead of double bagging bottles and closures inside the carton.
  • Concentrate Elimination Calculator: Switch from white pigmented bottles to those made with resin in its natural color state and eliminate CO2
  • Glass to PET Conversion Calculator: PET requires less energy to produce and saves on transportation costs.
  • Glass to HDPE Conversion Calculator: See the sustainable improvements in weight, transportation costs, and durability when you use HDPE instead of glass.

Sustainable Hemp Packaging is the Future of Industrial Packaging

By Vishal Vivek
11 Comments

The future of packaging is ripe for capitalization by the drivers of sustainability culture. With the battle lines drawn and forces at play in motion, change is now inevitable. The question arises: how quickly can the industry grow in the space of the next decade?

With an increasing number of nations banning non-biodegradable and petroleum-based plastics in certain uses, the choices at hand have naturally led to bioplastics. Bioplastics are a major ingredient of the renewable packaging industry. We derive them from various renewable agricultural crops, of which hemp is among the chief examples.

The Change for Hemp

The legal ramifications of the European Green Deal and the American Farm Bill of 2018 have created a microcosm where the sustainability discussion has turned into corporate initiatives for crops like industrial hemp, which are a source for bioplastics and numerous other products. The smaller carbon footprint of industrial hemp plays its role in shaping consumer demands towards a greener future.

Farmers are now able to cultivate the plant in the U.S., due to its removal from the list of controlled substances. Agribusinesses and manufacturers are aware of the plant’s versatility, with uses in packaging, building construction, clothing, medicinal oils, edibles like protein powder and hemp hearts, hemp paper and rope. What was once George Washington’s strong consideration as a cash crop for his estate, may gradually become the world’s cash crop of choice.

Hemp’s Sustainability Beckons 

Why is the crop unanimously superior in the aspect of eco-friendliness? Its growing requirements are frugal: water, soil nutrients and pesticides are not needed in large quantities. It absorbs great quantities of carbon dioxide from the atmosphere, and uses it to create 65-75% cellulose content within its biomass. Cellulose is vital in the manufacture of bioplastics. Hemp is also flexible within crop cycles, due to its small harvesting period of only 4 months.

Thus, farmers use it as a rotational crop, allowing them to also cultivate other crops after its harvest. High-quality crops like cotton, though superior in cellulose content and fibrous softness, require far more water quantities, soil nutrients and pesticides. Farmers face greater difficulties in cultivating cotton as a rotational crop, because it requires far more space and time.

Hemp Bioplastics For Packaging                                

We manufacture bioplastics from the hurd and cellulose of the hemp plant. Hemp bioplastics are biodegradable, and take up to a maximum of 6 months to completely decompose; by contrast, normal fossil-fuel-based plastic takes up to 1000 years to decompose.

Manufacturers incorporate these ingredients into existing manufacturing processes for regular plastics, such as injection molding. Thus, we can apply bioplastic ingredients to similar plastics applications, such as packaging, paneling, medical equipment and more. New technologies aren’t necessarily needed, so companies and manufacturers do not have any reservations about its viability as an industry.

Here are a few types of bioplastics derived from hemp:

  1. Hemp Cellulose-based Bioplastics

This is a substance found in plant cell walls. We use cellulose to manufacture a broad range of unique plastics, including celluloid, rayon and cellophane. These plastics are usually entirely organic. We mix cellulose and its variations (such as nanocellulose, made from cellulose nanocrystals) with other ingredients, such as camphor, to produce thermoplastics and the like. Using natural polymer, we process a broad range of bioplastics and corresponding polymers. The difference in their chemical properties is down to the nature of the polymer chains and the extent of crystallization.

  1. Composite Hemp-based Bioplastics

Composite plastics comprise organic polymers like hemp cellulose, as well as an addition of synthetic polymers. They also have reinforcement fibers to improve the strength of the bioplastic, which are also either organic or synthetic. Sometimes, we blend hemp cellulose with other organic polymers like shellac and tree resins. Inorganic fillers include fiberglass, talc and mica.

We call any natural polymer, when blended with synthetic polymers, a “bio composite” plastic. We measure and calibrate these ingredients according to the desired stiffness, strength and density of the eventual plastic product. Apart from packaging, manufacturers use these bioplastics for furniture, car panels, building materials and biodegradable bags.

A composite of polypropylene (PP), reinforced with natural hemp fibers, showed that hemp has a tensile strength akin to that of conventional fiberglass composites. Furthermore, malleated polypropylene (MAPP) composites, fortified with hemp fibers, significantly improved stress-enduring properties compared to conventional fiberglass composites.

  1. Pure Organic Bioplastics With Hemp

We have already generated several bioplastics entirely from natural plant substances like hemp. Hemp fibers, when made alkaline with diluted sodium hydroxide in low concentrations, exhibit superior tensile strength. We have produced materials from polylactic acid (PLA) fortified with hemp fibers. These plastic materials showed superior strength than ones containing only PLA. For heavy-duty packaging, manufacturers use hemp fibers reinforced with biopolyhydroxybutyrate (BHP), which are sturdy enough.

With the world in a state of major change due to the coronavirus outbreak of 2020, the focus is back on packaging and delivery. In this volatile area, perhaps the industry can learn a few new tricks, instead of suffocating itself in old traditions and superficial opportunism. The permutations and combinations of bioplastic technology can serve a swath of packaging applications. We must thoroughly explore this technology.

Hemp’s Future in Packaging

Fossil fuel-based plastic polymers are non-renewable, highly pollutive and dangerous to ecosystems, due to their lifespans. They are some of the most destructive inventions of man, but thankfully could be held back by this crop. Industrial hemp upheld countless industries through human history and now is making a comeback. After existing in relative obscurity in the U.S. due to false connotations with the psychoactive properties of its cousin, it is now back in business.

With the American hemp industry on the verge of a revolution, hemp packaging is primed to take over a significant part of the global packaging sector. The political, economic and environmental incentives for companies to adopt bioplastics are legion. Its lower cost lends to its allure as well. Consumers and agribusinesses are following suit, making the choice to be environmentally-conscious. By 2030, it is estimated that 40% of the plastics industry will be bioplastics.

We can only mitigate the plastic pollution in oceans, landfills and elsewhere, with the use of biodegradable bioplastics; otherwise, animals, humans and plants are getting adversely affected by imperceptible microplastics that pervade vast regions of the Earth. With hemp bioplastics, we use the cleaner, renewable matter of plants to conserve the planet’s sanctity. We can expect this new technology to continue to light the way for other nations, societies and companies to build upon this sustainable plan.

Custom Designed Packaging: Is it Right for Your Cannabis Product?

By Danielle Antos
1 Comment

There are numerous plastic bottle and closure manufacturers in the cannabis industry today. And, there is a significant quantity of common bottle and closure styles as well. Many companies manufacture the same or similar products as their competition. But what if you’re searching for something different? Something unique that no one else has? A plastic bottle that will make your cannabis product stand out from your competition. Where can you find that package that is truly “something special?” Something that will elevate your brand?

It doesn’t matter if your cannabis business is a start-up in its infancy or a mature company with an established loyal customer following, creating attention-grabbing packaging is essential to your success. The packaging is the all-important and critical first impression. While the primary function of any packaging is to contain, protect and market your cannabis products, your packaging is a reflection of your company in the eyes of the consumer. In many ways, the package is the product. Using creative plastic packaging is a great way to differentiate your cannabis products from those of your competitors.

Finding the right manufacturing partner is the first step. Look for a company that has custom design capabilities and understands your vision for the perfect cannabis packaging.

When is Custom Bottle Design the Right Choice?

Sometimes, an off-the-shelf stock bottle and closure will work just fine. But if you are introducing a brand-new product that is unique to the industry, or if you are using a new product to introduce the fresh new look of your brand, it makes sense to develop plastic packaging that is distinct and eye-catching. You want your brand and products to look special and stand out on the shelf. There could also be filling equipment, regulatory, labelling, light sensitivity or other packaging requirements you must address as well.

Start every custom cannabis bottle project with a trusted manufacturer who thoroughly understands how you want the plastic packaging to look and the specifications it must meet. Ensuring that these qualitative and quantitative details are discussed will lead to on-time, on-budget and on-target custom cannabis packaging solution.

Achieving the Look You Want

Depending on your requirements, there could be several solutions to achieving the special look and specifications of your custom packaging. Discuss all of the design options that meet the needs of your product with your manufacturing partner; they should help you decide on the best direction for your packaging.

Selecting the right materials for your custom plastic bottle and closure is a big part of the process. Select materials that will provide the necessary aesthetics, chemical resistance, light transmission, bottle capacity and weight requirement that will protect your product.

Your manufacturer should also be able to guide you through the production process: should the bottle be blow molded or injection molded? Should it be made on IBM (Injection Blow Molding) equipment or EBM (Extruded Blow Molding) equipment? Answering these questions will ensure that the plastic bottle will be made efficiently and to the correct specifications.

Flawless Closure Integration for Your Cannabis Packaging

Designing the bottle is important, but you must also consider what type of closure will work best. Both items must be engineered to work seamlessly with each other. If the closure doesn’t work properly with the bottle, it can compromise the product it contains. Closures must always seal perfectly to ensure the integrity of the product inside. They must also be designed to function efficiently and meet the requirements of your filling operation.

A detailed CAD drawing should be provided, outlining every critical dimension of your HDPE or PET bottle and plastic closure. The CAD drawing provides the direction needed to create the manufacturing mold for your custom design. It also serves as a reference check to ensure that the product is produced according to your specs.

Ensure Quality through the Manufacturing Process

Ensure that your packaging partner has quality checks in place throughout the manufacturing process. Error detection systems, random sampling and testing will safeguard 100% conformity. It’s also important that manufacturers adhere to cGMP best practices and certifications under a globally recognized accredited program. This represents their commitment to continuously improving manufacturing processes and quality systems. It also helps minimize waste and manufacturing errors while increasing productivity. Risk of product contamination and other errors will be alleviated, and product efficacy and shelf life expectancy will be met.

Responsive Customer Service and Support

Many packaging manufacturers claim to provide exceptional customer service, but few actually rise up to that level. This is an important aspect of your project and you need to know that your questions will be answered and that your producer will keep you informed of any changes. Knowing that you can trust your supplier allows you to concentrate on other aspects of your business, like growth and profitability.

Reinforce Your Brand with Customized Packaging

In today’s competitive cannabis market, it’s more important than ever to have your product stand out from the competition. Your brand should help build awareness and develop consumer loyalty. When you deliver a consistently reinforced message, consumers will instantly recognize your brand. This consistency is a key factor in encouraging consumers to purchase your product over the competition — even when they want to try something new. Consistency makes your brand feel more dependable and people gravitate towards things they trust.

Your brand consists of more than just your logo and company name. Your brand identifies who you are, what your company stands for and the integrity of your product. Customized cannabis packaging will reinforce your brand and attract consumers to your products. Take time to find the right cannabis packaging partner who can help differentiate your brand and products from your competitors with special, eye-catching plastic packaging.

Keep Your Cannabis Product Safe with Dependable Packaging

By Danielle Antos
No Comments

No matter what type of packaging you select for your cannabis product, it needs to be dependable. Packaging is not only the first impression of your company to consumers; it must securely contain and protect the product inside. No one wants to purchase products inside packaging that looks dirty or isn’t sealed properly – it is imperative that packaging looks clean and safe to consumers. How does your cannabis packaging stack up? Is it sealed properly? Is it clean and defect-free? Does it conform to the ever-changing regulations?

Using plastic bottles and closures is a great way to secure your cannabis product and showcase your brand. Plastic cannabis packaging offers many different options: bottles can be produced using sustainable materials and come in many different shapes and capacities. Typical closures are child-resistant, lined or unlined, and with a text or pictorial top.

Because packaging performs so many functions for your cannabis business, it is important to realize that not all plastic bottles and closures are the same. High density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP) and polyethylene terephthalate (PET) bottles and closures are widely used for cannabis packaging. Keep in mind that bottle selection is only half of the equation. Equally important is selecting a closure that works with the bottle and has the right features you need.

So, how do you select the right plastic closure for your cannabis bottles? Your packaging manufacturer should be able to guide you towards the solution that’s right for you. However, there are several key factors that will help you identify a superior packaging solution.

Closure Seal

Unevenly manufactured bottle tops can result in poor closure seals and an increased risk of product contamination. Choosing the incorrect lining material can lead to poor protection of your product or may not provide the proper tamper evidence required by regulatory agencies.

A bad seal can also jeopardize the freshness of your cannabis product. It can cause the flower to become excessively dry, resulting in overfilling to make up for weight loss. Situations like these can lead to higher product costs for your company.

Child-Resistant

What’s more important than keeping cannabis out of the hands of children? Child-resistant (CR) packaging not only increases safety; it instills consumer trust in your products and your brand. A closure that doesn’t fit the bottle can prevent the bottle and closure from working properly together, leading to possible accidents if the product is around children. CR closures are available in many different styles and functions – from traditional push-and-turn systems to snap caps and more.

Individual states are cracking down on child-resistant packaging certification for cannabis products. Although FDA approval is not currently required, it will be in the future. Be a leader in the cannabis industry and make preparations now to be compliant with future regulations.

Senior-Friendly

Closures can be child-resistant and at the same time be senior-friendly. Select closures that enable use by individuals who may have problems opening traditional capping systems. Innovative companies are designing closure systems that can be both safe for children as well as easy-to-open for those who have difficulty using their hands.

Compatible Bottles

Be sure that the closure you select works correctly with your chosen bottle. Can your packaging partner manufacture and supply closures that guarantee complete functionality with the bottle to protect your product? Closures produced by the same manufacturer as the bottles will ease your mind that the closure and bottle function correctly together. A one-stop-shop approach will also save you time and money.

Country of Origin

Is the packaging you use manufactured in the United States? Plastic bottles and closures manufactured overseas may have impurities in the resin or colorant that could leach or bleed into your cannabis products. They may not have documentation of origin or comply with FDA regulations. Your cannabis packaging partner should be able to provide this documentation so you can rest assured that your bottles and closures are manufactured under strict guidelines for the safety of your consumers and that your product won’t be affected. In today’s emerging cannabis market, there are stringent regulations on all types of cannabis packaging. If you use packaging that does not conform to regulations, you are putting your company at risk for product recalls, decreased sales due to low consumer confidence and other undesirable risks.

Selecting poor closures and bottles for your cannabis packaging can have long-term consequences. Not only will your brand be diminished, but your profitability will be reduced as well. Understanding how to identify the characteristics of quality plastic packaging that can help you avoid declining consumer confidence and lost sales. Work with a plastic packaging manufacturer that understands how important perfect quality is to your business.

How to Properly Store Plastic Cannabis Packaging

By Danielle Antos
No Comments

Your plastic cannabis packaging has a big responsibility. It contains and protects your product, communicates pertinent product information and delivers the first brand impression to your consumers. In order for plastic packaging to fulfill these important roles, you must take care to store and handle it properly.

Following storage condition requirements for plastic bottles helps protect your cannabis product, your company and your customers. It doesn’t matter if your cannabis packaging is HDPE (high density polyethylene), PP (polyethylene) or PET (polyethylene terephthalate), proper storage is imperative to maintain the integrity of the product until you’re ready to fill it.

Bottle and closure storage conditions such as time, temperature and humidity can have an effect on plastic containers. The exposure and age of a sample can also affect shrinkage, impact properties and the stress crack resistance of the container. Not to mention the potential threat of contamination to your cannabis product and the poor impression of your brand in the eyes of your consumers.

You may be wondering how to obtain storage information. The best place to start is with your cannabis packaging partner. Your supplier should be ready and willing to share all vital storage information with you. The best suppliers realize that there is more to a business relationship than just the financial transaction of buying packaging. The first step in proper storage is to identify the type of material that was used to manufacture your bottles and closures.

Know Your Bottle Material Type – HDPE

If you are utilizing HDPE for your cannabis packaging, the storage time should be minimal and a strict first-in-first-out inventory should be maintained. Many end users will re-approve bottles after two or three years to ensure they are damage-free.

In addition, elevated storage temperatures allow plastic containers to further shrink and harsh conditions can actually cause severe distortion. The degree of distortion and shrinkage depends on the design and how the bottles have been stored. Higher storage temperatures also accelerate the aging process of the container. A moderate storage temperature should be provided to safeguard consistent bottle dimensions and properties. It is routinely reported that HDPE bottles can withstand temperatures of 110°F/33°C for brief periods.

Although humidity itself will not degrade the plastic container, a humid environment can have a direct impact on the secondary packaging, such as the cardboard cartons used for shipping. If you use stretch wrap and/or control warehouse conditions, secondary packaging problems can be alleviated.

HDPE bottles and closures should be kept as clean as possible – it is best to leave them in the original sealed cartons. The storage area should be kept clean, dry and dust, odor, insect, and rodent-free. Following this rule will help to build consumer trust in your brand. No one wants to purchase cannabis products in dirty, dusty contaminated packages.

Using PET Bottles?

PET bottles should also be used in a first-in-first-out system to limit the time in storage. Long-term storage should be accomplished using a sealed polyethylene plastic bag or lined drums, totes, bins, Gaylord containers, supersacks or seabulks. The plastic liner will help prevent dust and dirt from entering the bottles.

Elevated storage temperatures (above 100°F/38°C) allow empty PET bottles to shrink, mainly due to relaxation of the oriented and partially oriented regions of the bottle. Extreme temperature conditions (above 131°F/55°C) can cause severe distortion of the amorphous areas of the bottle, including the finish and neck. Moderate storage temperature should be maintained to ensure consistent bottle dimensions and properties.

To help protect PET bottles from contamination, the storage area should be kept clean, dry and dust, odor, insect, and rodent-free. Additionally, the storage area should be approved for food storage. PET bottles should not be stored in direct sunlight, and aromatic materials such as spices, solvents, ink, cleaning supplies and disinfectants should not be stored in the same area.

When empty PET bottles are shipped to or through areas where the outdoor temperature may exceed 90°/32°C, it is recommended that a temperature-controlled container or trailer capable of maintaining a temperature of 80°F/27°C or lower be used.

Polypropylene (PP) Closures

Closures are also an important part of your cannabis packaging. The storage time of unlined closures should be minimized. As with bottles, a strict first-in-first-out inventory should be maintained.

Elevated storage temperatures allow unlined PP closures to further shrink. Harsh conditions can actually cause severe distortion. The degree of distortion and shrinkage depends on the closure design and storage conditions. High storage temperatures accelerate the aging process of the closure; moderate storage temperatures should be provided to ensure consistent closure dimensions and properties. Like HDPE bottles, this type of closure can withstand temperatures of 110°F/43°C for brief periods.

When stored in humid conditions, pay attention to the integrity of the cardboard cartons the closures are stored in. The use of stretch wrap and/or controlling warehouse conditions will help alleviate damage to the cardboard. Just like their bottle counterparts, PP unlined closures should be kept as clean as possible and it is best to store in original sealed cartons.

Proper Storage Supports Your Bottom Line

Storing plastic bottles improperly can reduce the integrity of the plastic, therefore making it unsuitable to contain your cannabis product. Poor storage can also be detrimental to filling lines and cause production problems, which can result in reduced efficiencies and added costs.

Product recalls can also be a by-product of poor storage due to increased chances of product contamination. If plastic bottles and closures are not properly stored before using, distortion and shrinkage can damage the bottle labels used to identify your product. Shrinkage of your plastic closures result in a poor sealing surface which is detrimental to the freshness of your cannabis product. All of these side-effects can be very damaging to your brand image, from which it’s hard to recover. Consumers will lose confidence in your brand – leading to reduced profits for your bottom line.

Whether your cannabis business is in the early start-up stages or established with loyal customers, properly storing your plastic packaging will help protect your brand, decrease the risk of product recalls and increase your profitability.