Tag Archives: regulatory

California Employment Laws, COVID-19 & Cannabis: How New Regulations Impact Cannabis Businesses

By Conor Dale
1 Comment

As employers in the cannabis industry adapt to making their businesses run and thrive in the age of COVID-19, federal, state and local jurisdictions have issued new laws and regulations providing rules and guidance on returning employees to work. Employers in the industry should be aware of, and prepare for, these rules moving forward.

Federal guidance regarding COVID testing and employees’ return to the workplace:

Since March, the Equal Employment Opportunity Commission (EEOC) has issued guidance and frequently asked questions (FAQ) concerning employment-related COVID-19 topics. In its September update, the EEOC answered practical questions relating to COVID testing, questions to employees regarding COVID, and employee medical information.

Employee testing

The EEOC has already stated that employers may administer COVID-19 tests before initially permitting employees to enter the workplace. In its September FAQs, the EEOC confirms that employers may conduct periodic tests to ensure that employees are COVID free and do not pose a threat to coworkers and customers. The EEOC also clarified that employers administering regular COVID-19 tests is consistent with current Centers for Disease Control and Prevention (CDC) guidance and that following recommendations by the CDC or other public health authorities such as the Food and Drug Administration (FDA) regarding employee testing and screening is appropriate. The EEOC acknowledges that the CDC and FDA may revise their recommendations based on new information, and reminds employers to keep apprised of these updates.

COVID questions for employees

The EEOC also confirmed that employers may ask employees returning to the workplace if they have been tested for COVID-19, which, presumably, permits employers to ask if the employee’s test was positive or negative. Please note that an employer’s right to ask employees about COVID testing is based on the potential threat that infected employees could pose to others if they physically return to work. As a result, the EEOC clarified that asking employees who exclusively work remotely and/or do not physically interact with other employees or customers about potential COVID-19 status would not be appropriate. The EEOC also stated that an employer may not directly ask whether an employee’s family members have COVID-19 or symptoms associated with COVID-19. This is because the Genetic Information Nondiscrimination Act (GINA) generally prohibits employers from asking employees medical questions about family members. However, the EEOC clarified employers may ask employees if they have had contact with anyone diagnosed with COVID-19 or who may have symptoms associated with the disease.

Sharing information about employees with COVID

The Americans with Disabilities Act (ADA) requires employers to confidentially maintain information regarding employees’ medical condition. The EEOC’s updated FAQS clarify that managers who learn that an employee has COVID may report this information to appropriate individuals within their organization in order to comply with public health guidance, such as relaying this information to government contact tracing programs. Employers should consider directing managers on how, and to whom, to make such reports, and specifically instruct employees who have a need to know about the COVID status of their coworkers to maintain the confidentiality of that information. The EEOC also clarified that workers may report to managers about the COVID status of a coworker in the same workplace.

California state guidance on employees returning to work

The state of California also recently released a “COVID-19 Employer Playbook” which provides guidance on employees to return to work. That playbook states that employees with COVID related symptoms may return to work 24 hours after their last fever, without the use of fever-reducing medications, if there had been an improvement in symptoms and at least 10 days had passed since symptoms first appeared. This was also indicated in the California Department of Public Health (CDPH) Order, issued in June, about responding to COVID-19 in the Workplace.

More recently, on August 24th, the CDPH released similar guidance which reiterates when employees who have tested positive for COVID could return to the workplace when: (1) at least 10 days have passed since symptoms first appeared; (2) at least 24 hours have passed with no fever (without the use of fever-reducing medications), and (3) their other symptoms have improved. Conversely, individuals who test positive for COVID and who never develop symptoms may return to work or school 10 days after the date of their first positive test.

Employers should also check local public health orders for their county when determining how and when to return an employee who has recovered from COVID-19. It is important to also confer with your employment counsel when implementing new policies and procedures related to COVID-19, particularly given that the guidance issued by government authorities continues to evolve at a rapid pace.

Return to work laws on the horizon

Finally, a number of local governments in California such as the City of San Francisco, Oakland and Los Angeles have enacted return-to-work ordinances generally requiring employers to offer available positions to former employees who have been separated from employment due to coronavirus related business slowdowns or government-issued shutdown orders. The California legislature is also in the process of enacting a potential law that would similarly require employers in the state to offer vacant job positions to former employees whose employment ended due to COVID.

While the San Francisco ordinance only addresses positions in San Francisco and the Oakland and Los Angeles ordinances primarily address large employers in the hospitality and restaurant industries, cannabis industry employers should strongly consider offering vacant job positions to former employees whose employment ended due to COVID in order to comply with these ordinances and other potentially applicable future laws and in an effort to avoid potential legal claims from former employees.

Employers are strongly advised to consult with counsel to make sure they are following the requirements of these new laws and regulations.

Navigating the Cannabis Industry in the Current Climate

By Serge Chistov
No Comments

All major industries took a hit during the COVID-19 pandemic, but in many states, cannabis dispensaries were labeled as essential, which has allowed the industry to continue with some alterations. The impact now will come from what innovations and improvements the industry can leverage going forward.

From changes to protocols and buyer behaviors to supply chain disruptions, there were many new hurdles for the industry in addition to the ones cannabis businesses already faced, such as funding. But the silver lining could be that businesses within the cannabis industry become less of a specialty and more ‘every day’ than ever before.

The effects of the pandemic on the cannabis industry

Overall, the industry has fared well, in part thanks to its distinction as an essential service in states where cannabis is legal. It’s possible states made this decision for the same reason that alcohol businesses were deemed essential in most places: hospitals are not equipped during pandemic times to take care of people who are being forced to detox or those suffering from anxiety because they don’t have access to their legal drug of choice.

In a multitude of ways, cannabis businesses have adapted to bring calm in a storm while at the same time making manufacturing adjustments to meet the CDC guidelines. For example, there is more attention placed on individually pre-packaged products for single use; something that is less sharable as an experience but eminently practical.

Another area that has shifted a little is in the limiting of the exchange and interaction between business owners and staff relative to the customers. It’s all in the aim of mitigating the risk of exposure, but it has changed the dynamic in many cannabis businesses. This is the new normal for the time being and the industry has adapted well.

Ultimately, retail cannabis businesses today are no different than the retail of candy, cigarettes or alcohol. Certainly, segments of the industry have still struggled. Lack of tourism and the curbside/take out circumstances at dispensaries took their toll. But without the opportunity to still conduct business in some capacity, 50-60% of all operators would have gone out of business. Plus, as many people use cannabis to offset medical symptoms, including pain management, there is a legitimate need for cannabis to be available. The pandemic has provided the opportunity for many who might not have tried it before to give it a chance to help them medicinally.

Behaviors have changed, including those of buyers

Driven by consumer interests, many dispensaries have adapted to provide curbside pickup options, delivery of online orders and more. That has meant that the customer also needs to be more knowledgeable about cannabis: the experienced consumer knows what they like and want and can make their choices at a distance. Someone who is new to cannabis use might find navigating the choices and options a little more difficult, without the help of experienced staff. The breadth of material online and the ability of some dispensaries to share content that helps the consumer to make choices, in the absence of walking around the dispensary, have been additional tools at the disposal of businesses.

That said, the cannabis industry today is not a vastly different one: it is adapting to the new rules and new reality. Whether this way of doing business—at a distance—is a temporary or permanent solution will be dependent upon what federal and state regulators dictate in the months ahead, but there is likely to be ongoing demand for being able to order online and keep social distance protocols in place.

An interesting example is the Ontario Cannabis Store (OCS) in Ontario, Canada. This is a government run shop that has retail as well as a robust online presence, with free delivery during the pandemic. This has facilitated an increase in new customers, which had already jumped, post legalization. People who might have felt uncomfortable going into a dispensary can still learn about cannabis online and order it, from the relative comfort and safety of their sofa.

Supply chain disruptions and the cannabis industry

The industry has long been focused on overseas suppliers. With the arrival of the pandemic and restrictions on obtaining products from other countries, supply chains have been disrupted for many cannabis businesses. That has forced many to shift their supply chains to more local manufacturers, in North and South America.

In the long run, this should have a positive impact for the industry, so that despite the short-term disruption to the supply chain, which is having an impact on the industry as a whole, there could be an upside for local producers, growers and manufacturers. It will take time to know how this will all play out.

Funding and other issues for the cannabis industry

For a new cannabis startup in these times, the key will be what it has always been for any business, just to a greater degree: due diligence. Companies that want to open a cannabis business, whether during the pandemic or not, need to evaluate the opportunity as one would any investment. It’s all about the numbers: data for the industry as a whole and specifically from competition. These days, that data is widely available and more and more consultants and investors have expertise in this industry. “Overall, there is more interest in the industry than ever before”

It’s vital to be extremely well versed, particularly for businesses that are relatively new in the industry, because the single biggest issue for many has and will continue to be funding and investment. The cannabis industry is no different than any other business, except for the fact that it is a specialty business. With that comes the need to look for funding among investors who have some knowledge or appreciation for the industry.

Some of the key concerns traditional investors will have include:

  • Regulatory differences from state to state: since cannabis is still illegal at the federal level, there can be an array of hurdles at state and local level that make cannabis businesses trickier to work with.
  • There are religious based/morality issues for some lenders in dealing with the industry. These aren’t dissimilar from issues with other industries such as adult entertainment and gaming. It’s also fair to point out that, morality aside, these industries have thrived in the last several decades.

So, while traditional banking institutions will often deal with the proceeds from the cannabis industry, including allowing bank accounts for these businesses, there is far less of a chance that they would invest in a cannabis business, for fear of risking their license. They can even go so far as to refuse to include income from a cannabis business in the determination of a loan application.

There are more unique lending or investing groups that either specialize in cannabis or are starting to open their books to specialize in cannabis. Overall, there is more interest in the industry than ever before, as it becomes normalized in American society: more participants and more insiders of the industries that are willing to invest in the right idea.

Will legalization be more likely in the future?

The fact that cannabis businesses and dispensaries have been deemed essential services during the pandemic, where they legally operate, has shed new light on the relevance of these businesses and the advantages of more widespread legalization.“Consumers will help drive the innovations as they demand clean consumption methods”

In fact, the pandemic has normalized a lot of new behaviors, including the acceptable use of cannabis to help with stress and anxiety. People are, perhaps thanks to staying at home more, doing the legwork to understand how cannabis could be useful to them in managing their stress. The medicinal benefits of cannabis have long been researched and understood: consumers are coming into the fray to express their interest in it, which can only fuel the possibility of more widespread legalization.

Add to this the fact that the cannabis industry is a growth industry. There are companies and jobs that aren’t coming back, post-pandemic. There is an opportunity to grow the cannabis industry to the general benefit of many, both as business owners and employees. The revenue generated from taxation following legalization would also benefit many state coffers. Federal level legalization would be the panacea to eliminate the mixed message, state by state regulation that currently exists.

Opportunities for innovation, moving forward

As more and more people become interested in the industry, and as cannabis use is normalized within society through legalization, the opportunities for the industry can only expand.

For an industry that started on the simple concept of smoking cannabis, the advances have already been legion: edibles, nanotechnology-based formulations for effective, clean consumption and many more innovations.

In a world that increasingly sees smoking as a negative, for the obvious impact to lung health, there are so many opportunities to grow the industry to find consumption methods that are safe and still deliver the impact of the inhaled version.

Here again, consumers will help drive the innovations as they demand clean consumption methods. The technology is available to make this possible; it only takes innovation and education to find the best ways to move this industry forward.

As legalization expands—and particularly if it is dealt with at the federal level—the industry will be able to capitalize on existing infrastructure for manufacturing and distribution, allowing new businesses to grow, get funded and thrive in the new normal.

How Barcode Labeling Improves Traceability & Security

By Travis Wayne
1 Comment

One of the biggest challenges that cultivators, processors and distributors face in doing business is the requirement to track the product at every step in the production process, from seed to sale. When you add the wide range of label sizes and requirements across the supply chain, labeling can feel overwhelming. While business systems such as METRC, BioTrack, MJFreeway and others are key, integrating accurate and secure barcode labeling with those systems will streamline the end-to-end process while meeting traceability requirements. Here are some things to consider, no matter what role in the cannabis supply chain you play.

Cultivation: Where Tracking and Labeling Starts

Cultivation is where the tracking process begins – integrating barcode labeling METRC, BioTrack, MJ Freeway from the start will streamline the end-to-end process

It’s crucial to implement accurate labeling processes from the beginning, whether growing for a customer or your own vertically integrated operation. The cannabis industry is faced with strict labeling regulations for a variety of cannabis products. Start with a labeling system that can integrate with METRC, BioTrack, MJ Freeway or other seed to sale software solutions. Your barcode labeling solution should also include label approval requirements, so you have role-based access and transparency with label changes and print history in case of issues or recalls. Whatever cannabis labeling regulations your business faces, label design software helps you create compliant cannabis labels throughout the supply chain, from grower to consumer.

Radio Frequency Identification (RFID) Labeling

Select regulations require growers to leverage RFID technology to track the location of the plants in their grow houses. RFID technology also enables accurate real-time inventory analysis and helps reduce manual labor costs, as well as errors that can occur with manual counting. To accurately encode RFID tags with variable plant data, be sure you are using a barcode labeling system that can enable easy RFID tag encoding that integrates data from all your business systems. Fastening RFID tags to plants across your grow house floor enables quick and easy location tracking, and RFID reading removes the need for a manual line of sight and allows hundreds of tags to be read at the same time, speeding up shipping and receiving.

Lab Testing

After a plant is cultivated, a certain percentage is sent to a lab to be tested to ensure its proper strain, weight and compound makeup. After your product has been lab tested, leverage the data from your certificate of analysis to accurately display on your cannabis product labels, including:

  • Pass/fail chemical testing
  • Final date of testing & packaging
  • Identification of testing lab
  • Cannabinoid profile & potency levels
  • Efficiently display lab testing results on product labels with the use of a QR code for the consumer to review the independent lab’s certificate of analysis

Processing and Production: Tracking and Labeling After the Plant Has Been Harvested

A lot of information needs to go on a cannabis label. Whether you’re producing pre-rolls, packaged flower, edibles, beverages, topicals or cartridges, your labeling software must have the capability to create a wide variety of label sizes with barcodes that encode a large volume of data, while also being fully compliant and showing consumer appeal.

Your cannabis labeling software should do the following for you:

  • Support database integration to populate variable data from METRC, BioTrack, and other systems
  • Import high-resolution artwork and leverage with dynamic barcodes and variable data
  • Contain barcode creation wizards for 1D & 2D barcodes
  • Automate weigh & print
  • RGB/CMYK color matching
  • Feature secure label approval processes, label change tracking and print history
  • Offer WYSIWYG (What You See is What You Get) printing
  • Automatically trigger printing directly from scales and scanners when cannabis is weighed
Automatically integrating data with your barcode labeling software improves regulatory compliance, security and reduces manual processes that can lead to labeling errors

Integrate labeling with your seed to sale software solution to automatically trigger label printing by an action in your seed to sale system or by monitoring a database. By integrating your label printing system with your seed to sale traceability system, you can expect to minimize errors, increase print speeds and maximize your ROI. Your business system already holds the variable data such as product names, license number, batch or lot codes, allergens, net quantity, cannabis facts, warning statements and more. By systematically sending this data to the right label template at the right time, labeling becomes an efficient and cost-effective process.

Distribution: labeling for consumer and industry demands

The ability to manage and distribute inventory efficiently is critical in the cannabis market. Warehouses and distributors need to ensure proper storage, handling and traceability of product, from the warehouse to the truck.

Leverage your labeling software to easily create:

  • Packaging labels
  • Shipping labels
  • Case & pallet labels
  • Inventory labels

If you use the same data for your documents and labels, consider moving document printing into your label design software for greater efficiency. An advanced label creation and integration software enables label and document printing standardization by allowing multiple database records to be on one file. That means when new documents or labels come into your database, your software can seamlessly integrate.

Dispensaries can benefit from integrated seed to sale labeling for traceability, speed to market

Whether you’re a small outlet or a large dispensary, you benefit from integrated barcode labeling that starts from the beginning of the process. How? When barcode labeling software is integrated with seed to sale software, product is fully traced throughout the entire process, from tagging each plant at cultivation to identifying the consumer at point of sale, and accurately communicating that data back to METRC, BioTrack and other critical systems. Some dispensaries do package raw flower onsite, which many times means manually weighing, recording and entering the weight on the label, which is a time consuming and error-prone process. Integrating weigh and print functionality with barcode software enables dispensaries to use the action of weighing raw flower to automatically trigger the label print job. The variable weight is then accurately and automatically populated on cannabis flower package labels, creating an accurate and efficient on-demand labeling process for dispensaries. With efficient labeling processes, time spent creating, correcting, approving and printing labels will be reduced, getting product on the shelves faster.

FDAlogo

CBD Industry Caught Between Regulators & Law Enforcement

By Gregory S. Kaufman
No Comments
FDAlogo

The consumer-facing CBD industry operates in a regulatory gray zone even as it grows in prominence. Illegal to market as an unapproved drug, dietary supplement or food additive under the Food, Drug & Cosmetic Act, nevertheless, the CBD industry has flourished with ingestible products widely available. With the increased consumer interest in CBD, headwinds in the form of mislabeled or contaminated products and unsubstantiated therapeutic claims, combined with regulatory uncertainty, continue to be a drag on legitimate market participants and consumer perception of CBD products. The regulation of hemp-derived CBD falls under the purview of the Food and Drug Administration (FDA) and its charge to protect the public health. Despite having jurisdiction to regulate CBD products, the FDA has done little to bring regulatory certainty to the CBD marketplace. However, the FDA, with the assistance of the National Institute of Standards and Technology (NIST), recently took important steps that can be described as “getting their ducks in a row” for the eventual regulation of hemp-derived CBD in consumer products. Always looming is the threat of criminal enforcement of the Controlled Substances Act (CSA) by the Department of Justice’s Drug Enforcement Administration (DEA) for plants and products not meeting the definition of hemp.

Prior to July 2020, the FDA’s regulation of the CBD industry was limited to a public hearing, data collection, an update report to Congress on evaluating the use of CBD in consumer products, and issuing warning letters to those marketing products for treatment of serious diseases and conditions. The FDA recognizes that regulatory uncertainty does not benefit the Agency, the industry or consumers and, therefore, is evaluating a potential lawful pathway for the marketing of CBD products. In furtherance of this effort, the FDA took several recent actions, including:

  • Producing a CBD Testing Report to Congress1
  • Providing draft guidance on Quality Considerations for Clinical Research2
  • Sending a CBD Enforcement Policy to the Office of Management and Budget for pre-release review and guidance3

FDAlogoNot to be overlooked, the NIST announced a program to help testing laboratories accurately measure compounds, including delta-9 tetrahydrocannabinol (THC) and CBD, in marijuana, hemp and cannabis products, the goal being to increase accuracy in product labeling and to assist labs in identifying THC concentrations in order to differentiate between legal hemp and federally illegal marijuana. These actions appear to be important and necessary steps towards a still be to determined federal regulatory framework for CBD products. Unfortunately, a seemingly innocent interim final rule issued by the DEA on August 21, 2020 (Interim Final Rule), may prove to be devastating to hemp processors and the CBD industry as a whole.4 While the DEA describes its actions as merely conforming DEA regulations with changes to the CSA resulting from the 2018 Farm Bill, those actions may make it exceedingly difficult for hemp to be processed for cannabinoid extraction without violating the CSA in the process.

  1. FDA Report to Congress “Sampling Study of the Current Cannabidiol Marketplace to Determine the Extent That Products are Mislabeled or Adulterated

On July 8, 2020, the FDA produced a report to the House and Senate Committees on Appropriations detailing the results of a sampling study to determine the extent to which CBD products in the marketplace are mislabeled or adulterated. The study confirmed what the FDA, Congress and the marketplace already knew – that in this regulatory vacuum, there are legitimate concerns about the characteristics of consumer CBD products. These concerns include whether products contain the CBD content as described in the label, whether products contain other cannabinoids (including THC) and whether products were contaminated with heavy metals or pesticides. With these concerns in mind, the FDA tested 147 CBD and hemp products purchased online for the presence of eleven cannabinoids, including determinations of total CBD and total THC, and certain heavy metals. The key tests results included the following:

  • 94% contained CBD
  • 2 products that listed CBD on the label did not contain CBD
  • 18% contained less than 80% of the amount of CBD indicated
  • 45% contained within 20% of the amount listed
  • 37% contained more than 20% of the amount of CBD indicated
  • 49% contained THC or THCA at levels above the lowest concentration that can be detected
  • Heavy metals were virtually nonexistent in the samples
The structure of cannabidiol (CBD), one of 400 active compounds found in cannabis.

Due to the limited sample size, the FDA indicated its intention to conduct a long-term study of randomly selected products across brands, product categories and distribution channels with an emphasis on more commercially popular products. In furtherance of this effort, on August 13, 2020, the FDA published a notice soliciting submissions for a contract to help study CBD by “collecting samples and assessing the quantities of CBD and related cannabinoids, as well as potential associated contaminants such as toxic elements, pesticides, industrial chemicals, processing solvents and microbial contaminants, in foods and cosmetics through surveys of these commodities.”5

Even though this report was not voluntarily produced by the FDA, rather it was required by Congress’ Consolidated Appropriations Act of 2020, it importantly solidified a basis for the need for regulation. With less than half of the products tested falling within the 20% labeling margin of error, this suggests rampant and intentionally inaccurate labeling and/or significant variability in the laboratory testing for cannabinoids.

  1. NIST Program to Help Laboratories Accurately Measure Compounds in Hemp, Marijuana and Cannabis Products

 Proper labeling of cannabinoid content requires reliable and accurate measurement of the compounds found in hemp, marijuana and cannabis products. As part of NIST’s Cannabis Quality Assurance Program, NIST intends to help labs produce consistent measurement results for product testing and to allow forensic labs to distinguish between hemp and marijuana.6 As succinctly stated by a NIST research chemist, “When you walk into a store or dispensary and see a label that says 10% CBD, you want to know that you can trust that number.” Recognizing the lack of standards due to cannabis being a Schedule I drug for decades, NIST intends to produce standardized methods and reference materials the help labs achieve high-quality measurements.

NIST’s efforts to provide labs with the tools needed to accurately measure cannabis compounds will serve as an important building block for future regulation of CBD by the FDA. Achieving nationwide consistency in measurements will make future FDA regulations addressing CBD content in products achievable and meaningful.

  1. FDA Industry Guidance on Quality Considerations for Clinical Research on Cannabis and Cannabis-Derived Compounds

On July 21, the FDA released draft guidance to the industry addressing quality considerations for clinical research of cannabis and cannabis-derived compounds related to the development of drugs. These recommendations are limited to the development of human drugs and do not apply to other FDA-regulated products, including food additives and dietary supplements. However, by indicating that cannabis with .3% or less of THC can be used for clinical research and discussing testing methodologies for cannabis botanical raw material, intermediaries and finished drug products, the FDA is potentially signaling to the consumer-facing CBD industry how the industry should be calculating percentage THC throughout the product formulation process.

While testing of botanical raw material is guided by the USDA Interim Final Rule on Hemp Production,7 the FDA warns that manufacturing processes may generate intermediaries or accumulated by-products that exceed the .3% THC threshold and may be considered by the DEA to be Schedule I controlled substances. This could be the case even if the raw material and finished product do not exceed .3% THC. The FDA’s guidance may eventually become the standard applied to regulated CBD products in a form other than as a drug. However, through its guidance, the FDA is warning the CBD industry that the DEA may also have a significant and potentially destructive role to play in the manufacturing process for CBD products.

  1. FDA Submits CBD Enforcement Policy Guidance to the White House

On July 22, 2020, the FDA submitted to the White House Office of Management and Budget a “Cannabidiol Enforcement Policy – Draft Guidance for Industry” for its review. The contents of the document are not known outside of the Executive Branch and there is no guarantee as to when, or even if, it will be released. Nevertheless, given the FDA’s interest in a legal pathway forward for CBD products, the submission is looked upon as a positive step forward. With this guidance, it is important to remember that the FDA’s primary concern is the safety of the consuming public and it continues to collect data on the effects of ingestible CBD on the human body.

It is doubtful that this guidance will place CBD products in the dietary supplement category given the legal constraints on the FDA and the lack of safety data available to the FDA. The guidance likely does not draw distinctions among products using CBD isolate (as found in Epidiolex), full or broad spectrum hemp extract, despite the FDA’s expressed interest in the differences between these compositions.8 Instead, the FDA is more likely to establish guardrails for CBD ingestible products without authorizing their marketing. These could include encouragement of Good Manufacturing Practices, accuracy in labeling, elimination of heavy metal and pesticide contamination, and more vigorous enforcement against marketing involving the making of disease claims. The FDA is not expected to prescribe dosage standards, but may suggest a maximum daily intake of CBD for individuals along the lines of the U.K.’s Food Standards Agency guideline of a maximum of 70 mg of CBD per day.9

Identifying concerns in the current marketplace; promoting accuracy in testing; highlighting the line between FDA regulation and DEA enforcement; and proposing guidance to the industry all appear to be signs of substantial progress on forging a regulatory path for ingestible CBD products.

  1. The DEA’s Interim Final Rule Addressing Derivatives and Extracts Could Have a Devastating Impact on the Cannabinoid Industry

The seemingly benign Interim Final Rule published by the DEA in August with the stated intent of aligning DEA regulations with the changes to the CSA caused by the 2018 Farm Bill’s definition of hemp could cut the legs out from under the hemp-derived CBD industry.10 Claiming it has “no discretion with respect to these amendments,” the DEA rule states that “a cannabis derivative, extract, or product that exceeds the 0.3% delta-9 THC limit is a schedule I controlled substance, even if the plant from which it was derived contained 0.3% or less delta-9 THC on a dry weight basis.”11 Under this interpretation of the 2018 Farm Bill language and the CSA, it is unclear whether processors of hemp for cannabinoid extraction would be in possession of a controlled substance if, at any time, a derivative or extract contains more than 0.3% delta-9 THC even though the derivative or extract may be in that state temporarily and/or eventually falls below the 0.3% threshold when included in the final product. It would not be unusual for extracts created in the extraction process to exceed 0.3% delta-9 THC in the course of processing cannabinoids from hemp.

The implications of the rule may have a chilling effect on those involved in, or providing services to, hemp processors. It is known, as revealed by the Secretary of the USDA to Congress, that the DEA does not look favorably on the legalization of hemp and development of the hemp industry. The DEA’s position is that the rule merely incorporates amendments to the CSA caused by the 2018 Farm Bill’s definition of hemp into DEA’s regulations. In doing so, the DEA made explicit its interpretation of the Farm Bill’s hemp provisions that it presumably has held since the language became operative. What is not known is whether this changes the DEA’s appetite for enforcing the law under its stated interpretation, which to date it has refrained from doing. Nevertheless, the industry is likely to respond in two ways. First, by submitting comments to the Interim Final Rule, which will be accepted for a 60-day period, beginning on August 21, 2020. Anyone concerned about the implications of this rule should submit comments by the deadline. Second, by the filing of a legal challenge to the rulemaking on grounds that the rule does not correctly reflect Congressional intent in legalizing hemp and, consequently, the rulemaking process violated the Administrative Procedure Act. If both fail to mitigate harm caused to the CBD industry, the industry will have to look to Congress for relief. In the meantime, if the hemp processing industry is disrupted by this rule, cannabis processors holding licenses in legal states may be looked upon to meet the supply needs of the CBD product manufacturers.

The Interim Final Rule also addresses synthetically derived tetrahydrocannabinols, finding them to be Schedule I controlled substances regardless of the delta-9 THC content. This part of the rule could impact the growing market for products containing delta-8 THC. While naturally occurring in hemp in small quantities, delta-8 THC is typically produced by chemically converting CBD, thereby likely making the resulting delta-8 THC to be considered synthetically derived.

The hemp-derived cannabinoid industry continues to suffer from a “one step forward, two steps back” syndrome. The USDA’s highly anticipated Interim Final Rule on hemp production (released Oct. 31, 2019) immediately caused consternation in the CBD industry, and continues to, due to certain restrictive provisions in the rule. Disapproval in the rule is evident by the number of states deciding to operate under their pilot programs for the 2020 growing season, rather than under the conditions of the Interim Final Rule.12 With signs of real progress by the FDA on regulating the CBD products industry, yet another interim final rule could undercut the all-important processing portion of the cannabinoid supply chain by injecting the threat of criminality where there is no intent by processors to violate the law. It is not a stretch to suggest that both the USDA and FDA are being significantly influenced by the DEA. The DEA’s Interim Final Rule is just another troubling example of the legal-illegal dichotomy of cannabis that continues to plague the CBD industry.


References

  1.  U.S. Food & Drug Admin., Report to the U.S. House Committee on Appropriations and the U.S. Senate Committee on Appropriations, Sampling Study of the Current Cannabidiol Marketplace to Determine the Extent That Products are Mislabeled or Adulterated (July 2020).
  2. U.S. Food & Drug Admin., Cannabis and Cannabis-Derived Compounds Quality Considerations for Clinical Research: Guidance for Industry(July 2020).
  3. U.S. Food & Drug Admin., Cannabidiol Enforcement Policy: Draft Guidance for Industry (July 2020).
  4. Implementation of the Agriculture Improvement Act of 2018, 85 FR 51639 (Aug. 21, 2020) (to be codified at 21 C.F.R. §§ 1308, 1312).
  5. U.S. Food & Drug Admin., Collection and Analysis of Products Containing CBD and Cannabinoids, Notice ID RFQ_75F40120R00020 (Aug. 13, 2020).
  6. Nat’l Inst. of Standards and Tech., NIST to Help Labs Achieve Accurate THC, CBD Measurements (July 21, 2020).
  7. Agricultural Improvement Act of 2018, Pub. L. 115-334, title X, 10113 (codified at 7 U.S.C. §§ 1639o-1639s).
  8. U.S. Food & Drug Admin., Report to the U.S. House Committee on Appropriations and the U.S. Senate Committee on Appropriations, Cannabidiol (CBD), p. 14 (March 2020).
  9. U.K. Food Standards Agency, Food Standards Agency Sets Deadline for the CBD Industry and Provides Safety Advice to Consumers (Feb. 2020) at https://www.food.gov.uk/news-alerts/news/food-standards-agency-sets-deadline-for-the-cbd-industry-and-provides-safety-advice-to-consumers.
  10. See supra n. 4.
  11. Id.
  12. U.S. Dept. of Agriculture, Status of State and Tribal Hemp Production Plans for USDA Approval (as of Aug. 26, 2020).

A2LA Accredits Viridis Laboratories

By Cannabis Industry Journal Staff
No Comments

In a press release published this week, the American Association for Laboratory Accreditation (A2LA) announced they have successfully accredited Viridis Laboratories to ISO/IEC 17025:2017.  Viridis Labs, based in Lansing, Michigan, gained their license to operate as a cannabis testing facility back in April 2020.

“Our company is incredibly proud of achieving this milestone of ISO/IEC 17025 accreditation through A2LA’s rigorous assessment program,” says Greg Michaud, CEO of Viridis Labs. “The choice to partner with A2LA was a simple one due to their international reputation as a global leader in accreditation programs. Additionally, their partnership and certification program through the American’s for Safe Access strengthens our accreditation further and helps solidify Viridis as Michigan’s premier cannabis testing laboratory.”

Leaders in Extraction & Manufacturing: Part 5

By Aaron Green
No Comments

Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the fifth and final article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.

In this week’s article, we talk with Kristen Suchanec, VP of Production at Island. Kristen converted her experience in traditional consumer packaged goods to cannabis to help create a brand that is sought after by many. The interview with Kristen was conducted on August 21, 2020.

Aaron Green: Good afternoon Kristen, I am glad we were able to put this interview together. I know you have been very busy!

Kristen Suchanec: I’m so sorry this took so long to actually work! Thank you for bearing with me. I’m happy we are able to talk.

Aaron: Great! I like to start off the conversation with a question that helps our readers get to know you a little better. So, Kristen can you tell me how you got involved at Island?

Kristen Suchanec, VP of Production at Island

Kristen: My background is in manufacturing and planning for consumer packaged goods. I had a friend of a friend and we were just at a happy hour and I asked what he was up to. He was actually our VP of Finance at Island and he handed me a box of pre-rolled joints. They were our Island Minis and I thought it was a great customer experience. I loved the brand and packaging which made it a consumer product versus, you know, this was a few years back where cannabis wasn’t necessarily commoditized or branded. I got really excited about that because I feel like cannabis should be traditional CPG and it should appeal to different people and it should have different brands that appeal to those different groups. So I literally just started a conversation. His brother is our founder and CEO and they needed someone to run production so that was my background and it all kind of lined up and I ended up being employee number five at Island!

Aaron: Wow, employee number five – awesome! OK, great. That is some nice background about how you got involved at the company. The next questions get into product development and manufacturing. The first question is: what’s your decision process for starting a new product?

Kristen: Yea, we are right now owning the lane between cultivation and distribution. So, getting those raw materials for whether it be concentrates or flower and then converting them into that final packaging for everything. So that is what we focus on and spend all of our time with automation and trying to make that process as efficient as possible.

When we’re looking at a new product we’re not necessarily creating a new extraction, we are really looking at the market and the end consumer and what people want. At Island we’ve really focused on vape, pre-roll and packaged flower. Those are the three categories we are working on right now. We are expanding and looking to move more towards vape and live resins and specialty concentrated products that we haven’t really had in our portfolio before. What we would like to do is make sure we have the capability to manufacture that and then take a look at where we think the market is going. We are trying to go in the flower, pre-roll and vape because that is where we spent so much of our time getting pieces of automation so not everything we are bringing in house is manual.

Aaron: Now when you say the capability to manufacture that are you talking about from a packaging perspective or…?

Kristen: Yes, so we won’t do any extraction on site. It’s getting distillate, shatter and flower and then we take that and convert that either into pre-rolled joint, a package of flower or any other final product. So, we are looking at automating that packaging piece.

Aaron: Got it. OK, so the next question — and I think you kind of touched on this as well — are you involved in manufacturing to the extent that you are manufacturing the packaging?

Kristen: Yes absolutely. My whole team’s manufacturing is based out of Oakland. That’s where we do all the conversion of products. I oversee that entire team and have been really involved in a lot of the equipment that we have sourced and iterations that we’ve gone through to make sure that we’re able to automate as much as possible. We’ve really focused on the issue of weighing the material. For our flower line everything is weighed and put into a jar, capped, sealed and labeled for it to come off our lines. We don’t have anyone in packing or anything like that. Our pre-rolls manufacturing is an automated machine where it actually weighs the flower before going into the cone so we’re not having to weigh after the fact and take into account the weight of the cone because that’s so variable so we know that the customer is getting consistency. Then for the vapes, it’ssame thing – the volumetric doses everything.

I have to give my credit to everyone on the floor who is doing the day to day, they find so many new solutions since they are the ones that are hands on.  I am really involved in what new equipment we need, what problems we are looking to solve and what’s causing our bottlenecks so we can continue to improve our process week over week and year over year.

Aaron: We’ll dig into some of those problems in a bit. What is your process for not just starting new product but for developing a new product?

Kristen: Yeah, absolutely. So, I think it’s really interesting to see where the market is going. What’s selling really well and especially over the past year pre rolls have been a huge growth platform for us. And especially now, we’ve seen some changes because of COVID as well. We have single joints. But then we have our Minis, which I’ve mentioned before, which are half gram joints. We’re seeing sales on those actually increased because I think people are sharing joints as people want individual things because of this pandemic.

When we go through this process, we’re really – again – we’re so focused on what the consumer wants, and what we think is going to add to our portfolio. Then when marketing and our product team comes to me, we really focus on our machinery, what we can do with it currently, and if we would need something additional. So,we’re excited about expanding into 510s right now. We’re looking at how we can automate the process of capping – we can fill right now, but not cap. And then we also take a look at packaging.

I think it’s a little different than creating like a whole new product, extraction or anything like that, but we were looking at more sustainable options for packaging for child resistance because we’re trying to move away from barrier bags as much as possible. We’re looking at, okay, how many stickers do we need to put on there? What is the labor time going into each piece of product? And again, how are we eventually going to get some consistency across product lines, etc.

So, it’s really taking all three of those components, making sure we’re getting out the customer that feels like they want. I’m having it either fit into our process or again, then go through and look at what automations meanand automation equipment investment you want to make for long term future investments.

Aaron: Are you developing new products internally, or are you relying on outside manufacturers for that?

Kristen: Not everything we do is internal. We have a big network of, you know, cultivators and extractors we work with, but we’re in the midst of getting our own cultivation and manufacturing in house by working with other companies. So with that we’re doing everything.

Aaron: Do you ever bring in external product development consultants for helping out with your processes?

Kristen: No, we don’t bring in consultants. But we have brought in another brand into our fold via a brand called Neutron Genetics. That is part of our overall portfolio. We work very closely with the founder because he has a lot of trade secrets, a lot of his own processes to make sure you’re getting the best product for that specific brand.

Aaron: In your product development, what does getting stuck look like to you?

Kristen: That’s a good question. I think one of the biggest challenges is working with the plant itself, because it’s not consistent and it’s not homogenous. You could get the same strain from the same cultivator, but it’ll be a different batch. It might be a little stickier or a little larger, etc. When you’re looking at traditional manufacturing and automation, you want consistency, homogenized liquids, same viscosity every time, and we don’t have that because the plant itself is natural and is going to have all these different expressions depending on the batch and how it was grown and how it was trimmed even.“I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team.”

So, getting stuck means finding an off-the-shelf solution that might work for, you know, nuts and bolts or some kind of food production and then you’re going to have to convert it to actually work with the cannabis plant. So that’s what makes it so challenging, but also really exciting. In the bud, humidity and air can really throw off a manufacturing process which is really different than just doing beverages for example.

Getting stuck means really having to work with the plant concentrates specifically if you think about just the nature of those whether it be shatter, distillate or very sticky product. So again, working with machinery isn’t always what goes hand in hand. So, getting stuck is dealing with all those different formats and inconsistency using the same product day after day.

Aaron: It sounds like consistency is kind of a main topic here?

Kristen: Yeah, I think it depends on what product format we have. For example, about a year ago, we launched infused pre-rolls for Neutron where we’re putting flower, kief and shatter into a joint. So that’s going to perform differently on a piece of machinery than just straight flower.

I think it all depends on the product. Usually it happens when it’s in that machine, you’re trying to get a good flow and a good consistency. You want to have time studies, you know how long it takes to make each batch. But if a certain flower mix is performing differently, it’s getting the settings of the machine dialed, right? It’s also properly training personnel so people know how to react when things get going. Sometimes things get physically stuck in the machine as well, so to be able to react on that.

I think it’s really the proper equipment, the proper training and then, again, continuing to evolve as a team. So for our pre-roll machine, we are now on our third version of it, just because we kept running into the same roadblocks and I’m hoping that continues to evolve and we just continue to get better equipment year after year.

Aaron: I see, do you ever hire outside consultants when you do get stuck?

Kristen: We’ve worked closely with vendors. I will say that we’re not a machine shop or engineering firm. So we’re not the ones creating a lot of what we use on the floor. We’ve partnered with various vendors, which has been helpful, but we haven’t used external consultants.“When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see.”

Aaron: Okay, now imagine that you have a magic wand and somebody can come in and help you. What does your magic helper look like?

Kristen: I could probably make a really long list if I’m focusing on just my manufacturing and everything! I think the next thing which we’re already thinking about that magic wand is how to get a perfectly rolled joint without having so much manual human touch to it. And like I said, we’ve really attached to that weighing problem. And we’ve seen solutions out there that you know, claim to twist and have that “perfect roll” and you don’t need to even touch it. But I think the biggest challenge there is it depends how well it’s packed. You know, you don’t want it too tight. You don’t want it too loose for that customer experience. So getting that quality, if I could wave a magic wand where I’m putting in, you know, paper on one side and out comes perfectly rolled joints, that would be my magic wand for sure. Okay, I think there’s a lot of solutions out there but to get that quality and that consumer experience that we want, I haven’t seen working practice yet.

Aaron: Okay, What’s the what’s the most frustrating thing you’re going through with the business right now?

Kristen: Again, that could be a long list! I think from a more macro-level, it’s definitely the competition with the illicit market and just how there’s not enough outlets for legal cannabis right now in the state of California. When you see the huge potential and then see how much is taken out from illegal activity right now, it is frustrating to see. We’re going to get this growth and projection of the right number of dispensary licenses and things like that are definitely a huge frustration as well as with the tax structure right now because it’s obviously contributing to people going to the illicit market.

Aaron: So what are you following in the market? And what do you want to learn more about?

Kristen: Yeah, I think that’s a great question. I think the thing I’m most excited about for the larger population isjust more research to come out about the actual attributes of the plant, or how different cannabinoids react together and can have different effects. How terpenes can affect the high, how things can be used and distantly, recreationally, etc. And really, hopefully evolve and move away from strictly some sativa, hybrid,indica classifications, and really be able to educate the consumer more about the plant so people can have a more a personal relationship to understand how cannabinoids or specific terpenes are going to give them a different effect. And again, I think that’s so interesting because it could be used for therapeutic reasons that people do consume cannabis or it could just make it a better experience for people who want to take this as an escape or a way to relax and everything. So I’m really excited because more research is going to be able to get done and we can really learn more about how all of these things interact in the body and then people can take it to a whole new experience and be more educated all around.

Aaron: Alright that’s the end of the interview Kristen! Nice chatting and meeting you!

Kristen: Alright, thanks Aaron!

CBD Watchdog Finds Beverage Labeling Inaccuracies

By Cannabis Industry Journal Staff
No Comments

According to a press release published in late August, CBD watchdog Leafreport found a large number of inaccuracies when testing CBD-infused beverages on the market today. Leafreport conducted independent lab testing on 22 different CBD-infused beverages and found more than half of the products had less CBD than the label claimed. To be specific, 12 out of the 22 products tested contained less CBD than advertised.

Canalysis Laboratories, the lab contracted to conduct the testing, found two of the products didn’t even contain any CBD. 18 of the beverages had CBD levels with a label claim variance greater than 10%. 14 of the beverages had CBD levels with a label claim variance greater than 40%. Only 4 of the beverages achieved an ‘A’ letter grade for coming within 10% of their advertised CBD levels.

According to Lital Shafir, head of product at Leafreport, the CBD beverage market is a bit tricky, largely due to product formulation issues. “This is in line with our expectations because CBD beverages are difficult to formulate and contain relatively small amounts of CBD, which means that variations of even a few milligrams can have a big effect,” says Shafir. “The CBD industry is completely unregulated and there have been many cases of companies selling products that contain little to no CBD. That’s why third-party testing is important for brands in this industry.”

Interestingly, this report did not find a positive correlation between a company’s reputation and their product’s test results. The full study can be found here. Leafreport is an independent, peer-reviewed website dedicated to increasing transparency in the CBD marketplace.

Soapbox

A Response to Governor Wolf’s Call for the Legalization of Recreational Cannabis

By Chris Visco
4 Comments

As a medical cannabis professional, I, like most industry leaders, have been left out of the conversation around the Governor’s call to legalize recreational cannabis. Much like flying a plane without the advice of the pilot, those of us who are rooted in this space should be given a seat in the cockpit if we’re headed in this direction.

While Governor Wolf has called for legalization, which is absolutely necessary, those who understand where legislation has gone wrong and what works well – including business owners and most importantly, patients – have been largely left out of the conversation.

I meet regularly with legislators and unlike many, I speak and listen to both sides. I applaud the call for legalization by Governor Wolf, however, I question his true intentions. Is this political posturing to make Republicans look out of touch? Any political strategist would say that if you actually want something done, you must work with the opposition. Like many issues today, change can only be created once we come together. This is no different.

Few people understand that cannabis was used as medicine for thousands of years and legal in the U.S. until 1969. In 1971, Nixon told us that cannabis was “bad” and drug abuse was public enemy number one, so Americans listened. Nixon then goes on to break American law, be impeached, resigns, and yet, Americans continue to follow his lead, vilifying cannabis users, 46 years later. As a society, we are taught to conform to what we are told by elected officials and community leaders as truth.

PA Governor Tom Wolf
Image: Flickr

Act 16 legalized cannabis – a term illegal to use by someone like me, who has been mandated by The Commonwealth of Pennsylvania, to use ONLY the racist term “marijuana” – but in a way that shames users. The system fails our patients at every turn leaving business owners hostage to an unmanageable “seed to sale” platform, leaving many patients without access to their medicine. Low income patients have been left out of our program by high prices and have not received any of the subsidies they were promised, even though the program has produced hundreds of millions of dollars.

Pennsylvania law strictly prohibits anyone charged with the use of cannabis to work in the industry. You cannot own a cannabis business or work for a cannabis company if you have been arrested for possessing a $10 joint. Yet, my customers skip to their cars with hundreds of dollars of weed in their bags and go about their day. Meanwhile, a 19-year-old black kid’s life just ended after he was pulled over, driving while black and the officer finds a joint. He can never receive financial aid for college or get a job because he has “a record.” The reality is, the black teen’s life will most definitely come to an end because of a joint while others can smoke walking down Broad Street and no one blinks.

Pennsylvanians want legal cannabis. It has a consistent history of reducing opioid deaths, state by state, by 25%. How many lives would be saved if we allowed those who cannot afford legal cannabis but fear prosecution for illegal use, to grow their own?

I have no judgement against those who have been conditioned to believe cannabis is an “illicit drug” because this is how we’ve been programmed. Cannabis has healed but has killed no one. We must educate our legislators before we vilify them. There are more Republicans quietly for legalization than against, but they need information, not shaming.

Legalization of cannabis is necessary to preserve our health and welfare, because we’ve become a society addicted to chemically derived pharmaceutical drugs designed to cause dependence. Cannabis is not physically addicting. It can prevent and eliminate seizures, shrink and even kill cancer tumors, settle the nervous system from diseases like Parkinson’s and MS and help those with anxiety, depression and PTSD. Legalize cannabis and clean up our homelessness, allow people of color to profit from an industry which has capitalized on them, allow low income people and all people to grow their own medicine, and reduce the violence in our streets caused by prohibition.

Pennsylvania needs a legalization law that includes real, hard-working Americans. I am one of the few, born and bred small business cannabis owners in Pennsylvania and I want opportunity for my neighbors and fellow Pennsylvanians in this space. We need legalization to save our communities, but we need two separate application processes – one that is directed toward those disproportionately impacted by the war on drugs which should be crafted to protect applicants who cannot afford thousands of dollars of application fees and the uncertainty of losing hundreds of thousands of dollars via legislative delays. The system is broken. There must be two points of entry.

Pennsylvania Republicans will legalize cannabis. Pennsylvania Democrats will not. Democrats hold no power or authority in our Republican controlled state, and they have shown no attempt to educate. Cannabis legalization is necessary to save the state, but money should not be the reason. Pennsylvanians deserve the education to understand what they do not understand.

Instead, lets legalize and allow 50% of the licenses to be awarded to social equity applicants (those disproportionately affected by the war on drugs) with a bill that is written in the best interest of the social equity applicant and the consumer. The other 50% of the applications should be open to current license holders (who should be grandfathered in with a high price license acceptance fee) and small business owners from Pennsylvania. (It is federally illegal to require residency requirements).

We must not eliminate the Multi State Operators (MSOs) because a free market depends on expertise and stability – and whether anyone wants to hear it or not, being disadvantaged is not enough to be a successful businessperson. We need a balance, but more importantly, as with our nation in crisis, we need to come together.

We CAN 

  • Provide affordable, non-addictive medicine to patients.
  • Allow people to grow their own cannabis.
  • Create BILLIONS in tax revenue nationally by taxing adult use cannabis.
  • Demand social equity reform where anyone can profit from the plant.
  • Free Americans from prisons and parole and expunge records.

All of this is a cry for peace. As a wise person once said, “Drunk men in a bar start a fight, high men start a band.”  Spread peace not hate. Thousands die from excessive alcohol consumption every year, but legalization of cannabis does not increase usage. No one has ever died from cannabis. Tell me again why we shouldn’t legalize? Those who believe we should not might as well push for alcohol prohibition again – it has no medicinal properties and kills.

Hopes and dreams will not help our humanitarian crisis – but action and education just might…

Leaders in Extraction & Manufacturing: Part 4

By Aaron Green
No Comments

Cannabis extraction and manufacturing is big business in California with companies expanding brands into additional states as they grow. This is the fourth article in a series where we interview leaders in the California extraction and manufacturing industry from some of the biggest and most well-known brands.

In this week’s article we talk with Michael Schimelpfenig, head of R&D and BHO extraction manager at Bear Extraction House. Michael worked in the cannabis space for about five years prior to landing his role at Bear, having spent several years in the hills of Humboldt County. The interview with Michael was conducted on August 3, 2020.

In next week’s piece, we sit down with Kristen Suchanec, vice president of Production at Island. Stay tuned for more!

Aaron Green: Good morning Michael and thank you for taking the time to chat with me today!

Michael Schimelpfenig: Thanks, excited to be here!

Aaron: I like to start off the conversation with a question that helps our readers get to know you a little better. So, Michael can you tell me how you got involved at Bear Extraction House?

Michael Schimelpfenig, head of R&D and BHO extraction manager at Bear Extraction House.

Michael: You know, I actually landed my role at Bear through a job search on LinkedIn. I had been working in the traditional market for five years and was getting tired of the irregular paychecks and general uncertainty of working in that market. You know, too many helicopter buzzes and all that. I felt like the risk vs reward just wasn’t there. I like Northern California and knew I wanted to find something up in Humboldt County where I had been fortunate to get experience out in the hills. After I applied on LinkedIn, I was contacted in twenty-four hours. I had an interview twenty-four hours after that and the next day I had a job! It’s been a big change going to a legal company. The possibilities are lightyears beyond what you can do in the traditional market. Lots of resources and equipment available that just aren’t there in the traditional market.

Aaron: Fascinating! I spent a week up on Humboldt last year and it is beautiful up there. The next questions will be focused on product development and manufacturing. What is your decision process for starting a new product?

Michael: We get feedback from a lot of different places. Sometimes a new product idea is coming from our CEO, Per. He comes to me with new ideas and asks if we can do something. Often it will start with a general question. Is it possible with the given capabilities? Is it scalable? Some of our new product ideas are based on market input and then others are based on employee input. Sometimes we have pre-existing ideas and just need to sit down to formalize them. Here at Bear we have the capability of making a lot from a little input.

We’re always playing with ideas. We have lively R&D meetings each week where we throw ideas around. Take byproducts from a product development run for example. Maybe it’s not a byproduct, but maybe a separate new product altogether! Sometimes we’ll start off wanting to make something and, in the process, create something unexpected that we are then able to turn into a product. Creating new products is just as important as improving optimizations. Ideas come from all over the place.

We focus these ideas through the R&D committee. Common questions include: How do we develop the product? What are the costs? Is it marketable? We have to view things from an economic standpoint and we wont proceed until we can figure out what the product can be and what we can make money from. Our R&D committee is made up of our COO, Jeff, our lead extractor, our oven room manager and our post-production manager who focuses on product separation. When we kick a new project off It all takes lots of scheduling and coordination.

Aaron: Are you developing new products internally?

Michael: We do 100% in-house product development and manufacturing. We are formalizing and creating a more focused approach to R&D and are bringing in some academics now. They are young minds with backgrounds in organic chemistry and thermodynamics. This is important because it’s the science behind the process that helps to generate the products. We believe the added talent should help to provide some grounding to the R&D. Before we made a lot of products by accident. The ultimate goal is uniform manufacturing and that requires an understanding of molecular processes.

Aaron: Answer the next question however you like. What does being stuck look like for you?“If a product isnt behaving the way we expect, we will do testing to determine cannabinoid and terpene levels to gain better understanding.”

Michael: Well, there are a couple ways to get stuck. Sometimes you can get stuck with a limited product portfolio. A year and a half ago all we made was live resin. Now we have different levels of live resin and six different vape carts. If you are not changing and developing new products, you are stuck.

When the web of production stops going that is definitely what I consider getting stuck. You can get stuck if sourcing material is difficult to find or cost prohibitive. We will pivot and adjust manufacturing material if that happens. We are also exploring best avenues for sourcing high quality trim and working with farmers to specifically grow strains and exotic genetics. But overall, getting stuck happens. Being stuck, on the other hand, is a lack of creativity.

Aaron: If you get stuck is it usually the same place? Or is it different each time?

Michael: We have redundancies for equipment and components. If we are getting stuck in the same place it is usually due to a lack of source material. Sometimes we get material that degrades prior to extraction. It’s a matter of contacting supplier to coordinate with them on the best approach forward. If a product isnt behaving the way we expect, we will do testing to determine cannabinoid and terpene levels to gain better understanding. In the end, sometimes we just have to pivot to other products with things we have.

Aaron: Thanks for that. Now, imagine you have a magic wand that can take care of your issues. What does your magic helper look like?

Michael: My magic helper would be someone to help with reporting. Someone that can take care of METRC indexing and preparing final R&D reports. Like a magic data processor. Someone to handle the minutiae.

Aaron: Whats most frustrating thing you are going through with the business?

Michael: There’s never enough time! We continue to manufacture at full capacity all the time. With that demanding of a schedule it can be difficult to manage time between day-to-day processes and being able to look at bigger picture.

Aaron: Now for our final question: What are you following in the market and what do you want to learn about?

Michael: I’m following the guys out there that are heavy into crystallization. There are some huge THCA diamonds coming from East Coast Gold. I would like to know what their solution is. What is their magic liquid and process? I am a big fan of diamond growth. You can grow extremely pure isolates that way. We grow our own diamonds and have had them tested greater than 99.99% THCA. I think high level purity THCA from diamonds is preferred versus distillate. There is a difference in the smoke between them too. Having a process for making large quantities of diamonds would open us up to sticking our foot in edibles and topicals too. There is control that comes with having a purity level like that. Dosage is difficult without it. I am also interested in improving extract purity and isolating terpenes. I like solvent-less products. It means it came from a high-quality source. I would be just as happy smoking good flower as concentrate derived from the same flower.

Aaron: Alright that concludes our interview! Thank you again for the time today, Michael!

Michael: Thank you.

Soapbox

The Power of TV for CBD Brands

By James Kozack
No Comments

With the death of Facebook arbitrage, direct-to-consumer (DTC) marketers are forced to look for new ways to drive sales more quickly than ever before. Enter TV. Once seen primarily as a branding medium, DTC brands are now using television to drive online and in-store sales. The continued growth and sophistication of attribution modeling in television has allowed marketers and their agency partners to more directly measure television’s impact on KPIs.

But what if you are a brand that can’t be on Facebook or Google due to ad restrictions?  Or your potential customer base is spread across multiple demographics? TV is a great, if not the only, way to reach CBD customers on a mass scale. CBD brands face the same challenges that all DTC brands face with the added bonus of additional restrictions due to product perception, and can also vary drastically state-by-state around the country. These restrictions however, also create a huge opportunity for the savvy marketer to dive in and own share of voice in the CBD market. With Facebook off the table, CBD brands are spared the expense of learning that Facebook arbitrage no longer exists. The opportunity to scale an emerging CBD brand on TV has never been more accessible.

The acceptance of CBD brands on television still faces restrictions as each network group has their own standards and practices. However, the number of networks accepting CBD products grows by the day. As education and understanding around the efficacy of CBD increase, so are the networks’ willingness to accept advertising. Remember, there once was a time when liquor brands couldn’t advertise on TV!

Looking at other media platforms for reaching potential CBD customers through advertising, terrestrial radio also provides very strict guidelines, if allowed at all; the same can be said for digital options and satellite radio. Whereas podcasts are a popular option due to regulations mostly being decided upon by the podcast’s producers, it’s hard to compare the reach to consumers of podcasts vs. television.

The nuances of navigating the media landscape for CBD brands remains complex. The opportunity to capture market share through TV is wide open. The CBD brand who recognizes this and acts most quickly has the chance to become the undisputed brand leader in a market that projects to exceed $45 billion by the year 2024.

What are you waiting for?