On December 28, 2018, Canopy made the unsurprising announcement that it would begin exporting medical cannabis to the UK. The move comes shortly after the formation of Beckley Canopy, the research effort founded in partnership with the Beckley Foundation and Amanda Fielding, the woman who has continued to pioneer the field of cannabinoid research, and the announcement that Canopy will jumpstart medical trials here.
The two events are also connected, as the company will most likely start its export direct to the trials now planned and in general for research purposes as well as pharmacies, based on doctor’s orders.
Impact On The UK Market
Canopy of course, is now in a race with several other Canadian firms to establish market presence both on the trial and patient front. Tilray, Namaste and Wayland Group have all lined up to enter the market, if not having secured first patient orders. That said, entry will be slow for all, namely because of import regulations that may well still go off the cliff because of Brexit.
Intriguingly, however, the Canadians are not the only ones now in the ring. And the “Irish Question” is becoming even more of a potential source of cannabis. That became obvious in the aftermath of an announcement for additional funding and a 25% equity stake in Dublin-based Greenlight Medicines by SOL Global, a Canadian-listed company. Greenlight has already established an extensive network of not only researchers but has a reach at this point to over 1,000 pharmacies across the UK and Ireland.
Bottom line? Look for discussions on access to be fundamentally caught up in the impending, larger political discussions that are still deadlocked, with no certainty in site.And while so far at least, Scotland has remained quiet on the discussion, along with Wales and Cornwall, these are also places domestically in the UK where there could be new cultivation operations coming shortly.
Why? Wales is the “duchy” of none other than the Prince of Wales, Charles, the man who will be the next king of England. For most of his life, he has been pilloried for his ideas about alternative healthcare and organic farming. However, he also owns vast lands in Wales that support him, supported by rents, that are likely, in the near future, to switch to cannabis farming. Whatever reluctance he might have had to take the plunge, this is likely to change course with the next generation when he becomes king. Oversight of the management of all of this bounty will switch to his son, William. And this is a no-brainer, beyond of course, the fact that his sister-in-law, the Duchess of Sussex (Meghan Markle) already has a cannabis brand named after her.
Apart from this political and Royal twist, look for cannabis farming to occur in places like Cornwall, which has temperate weather brought by the Gulf Stream, a tourist economy and a desperate need, like many parts of the UK, for urban renewal. A high tech, high worth agricultural injection, in other words, is just what these parts of the country need.
Scotland, still, is an unanswered question mark, but it is unlikely that much growing will occur in the northern climes. That said, with cannabis production (of all sorts) beginning to wake up, there is no reason that the processing question will escape this part of the British Isles.That also means that calls for domestic cannabis to be grown in the UK itself could become much louder.
What Impact Will Brexit Really Have On Cannabis?
There is no way to really understand this question until the dust settles with negotiations that now have the potential to disrupt all trade between the UK and the rest of the world, including the Republic of Ireland. Ports and transportation through them are facing major disruption. Preparations for an off the cliff exit far beyond cannabis, have also been repeatedly criticized as being far too little, too late.
Bottom line? Look for discussions on access to be fundamentally caught up in the impending, larger political discussions that are still deadlocked, with no certainty in site.
That also means that calls for domestic cannabis to be grown in the UK itself could become much louder. Along with an impetus for greater reform.
Regardless, this drug, so often just below the surface of international affairs for so long, is clearly going to be in the room in larger political discussions now unfolding in the UK.
Impact On National Healthcare
British people, since the end of WWII, have had access to free healthcare thanks to the NHS. That said, after a decade of austerity, the system is now facing crisis unseen since the war. There are 100,000 doctor vacancies at the so-called “Trusts” across the UK which manage regional healthcare. Waiting times even for lifesaving operations are at an all-time high. And approvals for drugs, especially like cannabis, which fall into the territory of “special approval” across Europe are also caught in the mix.
As in other countries, in other words, while the news of exports beginning to enter the market is good for patients and the industry beyond that, it is just a start to a longer battle that is still playing out across Europe.
That said, there is another issue in the room that is also absolutely on the table and will be part of the medical cannabis conversation going forward. Digital healthcare–and of all kinds–is being touted as the solution to doctor and service shortages. Look for innovative cannatech solutions in particular that target this market in particular, in the near future.
In the meantime, the green trickle has begun. That said, given all that is at stake and on the table, there are many questions in the room about when the flood will actually take off.
Genome sequencing has made remarkable strides since the initiation of “The Human Genome Project” in 1990. Still, there are many challenges that must be overcome before this methodology can reach its fullest potential and be useful in serving as a method of Cannabis sativa genetics verification and tracking throughout the cannabis supply chain. Several major milestones that must be realized include end-to-end haploid type (single, unpaired set of chromosomes instead of complete paired set or “diploid”), long read, resolved genome sequences at a reasonable cost within a reasonable timeframe and with confidence in accuracy (Mostovoy et al.). These genomes are typically generated as shorter reads that are then scaffolded (Fig 1.) or matched to reference genomes in order to build a longer continuous read. While shorter sequencing reads indeed lower the cost barrier for producing more genomic data, it has created another issue as a result of this short-read technology.
Figure 1: Four sets of sequencing data (long-read WGS, Hi-C, optical mapping, and short-read WGS) were produced to generate the goat reference genome. A tiered scaffolding approach using optical mapping data followed by Hi-C proximity-guided assembly produced the highest-quality genome assembly. (Bickhart et al.)
There are two main issues with the more affordable short read sequencing methodology, the first being that sequential variants are typically not detected, especially if they involve a ton of repeats/inverted repeats, due to the limitation of the current referenced Cannabis genomes and the mapping process of the short-read sequences. This is especially unfortunate because larger variants can have up to a 13% variance within a diploid multichromosomal genome, such as Cannabis sativa, and this variance is thought to largely contribute to disease in various species, or maybe terpene profile in Cannabis sativa. Not being able to detect these variances with more affordable sequencing methodologies is particularly problematic and reference genomes produced with short read sequences are typically highly fragmented. The second limitation is the inherent errors, gaps and other ambiguities associated with taking tons of short read sequences and combining them all, like a jigsaw puzzle, in order to draft the larger genomic picture. While there is software with algorithms to assist in deciphering raw sequences, there is still much more work to be done on this challenge, considering that cannabis genome sequencing is new genomics territory. Unfortunately, as researchers seek higher and higher levels of data quality, shortcomings of this type of sequencing technology begin to become apparent. This sort of sequencing methodology relies heavily on reference sequences. This isn’t much of an issue with microbial genomes, which tend to be rather short and typically have one chromosome, however, when seeking to analyze much longer genomes with multiple diploid chromosomes and tons of mono and dinucleotide repeats, problems arise (English et al.).
Figure 2: Blockchain Digital Stamping Certificate which publicly documents the date and time of the completion of this work. (Mckernan – Crypto Funded Public Genomics)
The other category of sequencing is long read sequencing. Long read sequencing is as it sounds, the deciphering of much longer DNA strands. Of course, the technology is limited by the quality of the DNA captured, therefore, special high molecular weight DNA extraction protocols must be deployed in order to obtain the proper DNA quality (Fig. 3). Once this initial limitation is overcome there is the stark cost of long read sequencing technology. PacBio without a doubt makes one of the highest quality long read sequence generating instruments that has ever graced the field of biotechnology, but due to the steep price tag of the machine, progress in this field has been stifled simply because it just isn’t affordable and the read depth for mammalian and plant genomes is currently almost completely prohibitive until read lengths double in length for this instrumentation. In order to produce what is considered to be a “validated genome” both short read and long read sequencing methodologies are combined. Long read sequencing data is used to produce the reference contigs because they are much easier to assemble, then short read sequencing is scaffolded against the reference contigs as a sort of “consensus validation” of the long read contigs.
Figure 3: Depiction of various DNA high molecular weight DNA quality captured during cannabis genome submission project. (Mckernan – Crypto Funded Public Genomics)
Despite the shortcoming of utilizing short read sequencing technology for analysis of the cannabis genome, it is still useful especially when combined with other longer read sequencing technologies or optical mapping technologies. Kevin McKernan, chief scientific officer of Medicinal Genomics, has been working feverishly to bridge the information gap between the cannabis genome and other widely studied plant genomes. As a scientist that worked on the Human Genome Project in 2001, McKernan has a demonstrated history of brilliance in the field of genomics. This paved the way for him to coordinate the first crypto funded and blockchain notarized sequencing project (DASH DAO funded) (Fig. 2), which was completed in 60 days, and surprisingly showed that the cannabis genome is over 1 billion bases long which is 30% larger than any cannabis genome submitted prior to his work. By reaching the standard of 500kb N50 set forth by the Human Genome Project, Kevin McKernan was able to see new aspects of the cannabis genome that were not visible due to the fragmented genomic data previously generated. Information such as a possible linkage of THCA synthase and CBDA synthase genes is crucial when seeking to use the cannabis genome for verification and tracking purposes. This is because special linkages can be considered a type of “genetic marker” that may be used to differentiate cannabis cultivars and lineages. There are many types of genetic markers, including SNP (single nucleotide polymorphisms), VNTR (variable number tandem repeats) and even patterns of gene expression. Funding and recording of cannabis genomics must be further developed in order for potential markers to be identified and validated via larger scale genome-wide association studies.
These technologies, when combined, often reduce the number of scaffolds while increasing the percent of resolved genome by filling in gaps within the drafted genome. Nanopore sequencing is an especially interesting and innovative sequencing technology that is useful in many ways. One of the most powerful uses of this technology is its ability to upgrade the quality of draft and pushed genomes by resolving poorly organized genomes and genomic structure for a fraction of the time and cost of other long read sequencing platforms (Jian et al.), making it an excellent candidate for solving cost and time constraints. Nanopore’s portability and convenience makes it a real-time solution to solving genetics-based problems and questions. A notable use of this technology is recorded during an epidemiological outbreak in Africa, its proof of concept in pathogen detection in space, and its ability to detect base modifications during sequencing process. Even still there are more uses to this exciting technology and it has the potential to elevate cannabis genomics and the field of genomics entirely, while remaining portable and expeditious. A shortcoming of the Nanopore sequencing platform is its low sequencing coverage, which makes this platform inefficient for applications like haplotype phasing and single nucleotide variant detection due to the number of variants to be detected being smaller than the published variant-detection error rates of algorithms using MinION data. Single nucleotide variants can be considered to be genetic markers, especially markers for disease, so this is what inhibits Nanopore from resolving our cannabis genome sequencing problems, as of today.
There are genetic markers to discover, molecular biology protocols to optimize, and industry wide potential for exciting collaborationMany algorithmic problems seem to occur due to input data quality. Typical input data quality suffers as the reads get longer and the sequencing depth gets shorter, resulting in not enough data being generated by the sequencing to provide confidence in the genome assembly. To mitigate this, scientists may decide to fractionate a genome, sequence it, or they may clone a difficult to sequence region with highly repetitive regions in order to produce reads with greater depth and thus resolve the region. They can then perform single molecule sequencing to resolve genome structure then determine and confirm the place of the cloned region. Thus, it seems that the best solution to the limitation of algorithms is to be aware of sequencing platform limitations and compensate for these limitations by using more than one sequencing platform to obtain enough pertinent data to confidently produce authentic, “validated” genome assemblies (Huddleston et al.). With input data being critical in producing accurate sequencing data, standardization of DNA isolation protocols, extraction reagents and any enzymes utilized may be deemed necessary.
To conclude, the field of cannabis genomics is teeming with opportunities. There are genetic markers to discover, molecular biology protocols to optimize, and industry wide potential for exciting collaboration. More states will need to take into account the lack of federal government research grant availability and begin to think of creative ways to get cannabis science funds to continue the development of this industry. Specifically speaking, developing a feasible method for genetic tracking of cannabis plants will require improvements within the availability of sequencing technology, improvements in deploying the resources to these projects in order for them to be completed expeditiously, and standardization/validation of methods and SOPs used in order to increase confidence in the accuracy of the data generated.
A special thank you to all of my cannabis industry mentors that have molded and elevated my understanding of current needs and applied technologies within the cannabis industry, without you there would be no career within this industry for me. You are immensely appreciated.
Citations
Bickhart, D. M., Rosen, B. D., Koren, S., Sayre, B. L., Hastie, A. R., Chan, S., . . . Smith, T. P. (2017). Single-molecule sequencing and chromatin conformation capture enable de novo reference assembly of the domestic goat genome. Nature Genetics,49(4), 643-650. doi:10.1038/ng.3802
English, A. C., Salerno, W. J., Hampton, O. A., Gonzaga-Jauregui, C., Ambreth, S., Ritter, D. I., . . . Gibbs, R. A. (2015). Assessing structural variation in a personal genome—towards a human reference diploid genome. BMC Genomics,16(1). doi:10.1186/s12864-015-1479-3
Huddleston, J., Ranade, S., Malig, M., Antonacci, F., Chaisson, M., Hon, L., . . . Eichler, E. E. (2014). Reconstructing complex regions of genomes using long-read sequencing technology. Genome Research,24(4), 688-696. doi:10.1101/gr.168450.113
Jain, M., Olsen, H. E., Paten, B., & Akeson, M. (2016). The Oxford Nanopore MinION: Delivery of nanopore sequencing to the genomics community. Genome Biology,17(1). doi:10.1186/s13059-016-1103-0
Mostovoy, Y., Levy-Sakin, M., Lam, J., Lam, E. T., Hastie, A. R., Marks, P., . . . Kwok, P. (2016). A hybrid approach for de novo human genome sequence assembly and phasing. Nature Methods,13(7), 587-590. doi:10.1038/nmeth.3865
Now that Canada finally has a date for the recreational market start, the federal government, provinces and other regulatory authorities are beginning to issue guidelines and rules that are going to define the early days of the recreational industry.
These include regulations on retail trade, medical sales and use. However this is precisely where the confusion is growing.
The Government Will Continue To Run The Medical Cannabis System
In a move to protect patients, Health Canada has announced that it will continue to run the medical part of the market for at least the next five years. In good news for medical users, this announcement was made against calls from the Canadian Medical Association for the medical infrastructure developed on Canada’s path to recreational reform to be phased out. The reason, according to the CMA? Many doctors feel uncomfortable prescribing the drug because of a lack of research and a general lack of understanding about dosing.
Both patients and advocates have expressed support for continuing the medical system. This includes organizations like the Canadian Nurses Association who fear that if a focus is taken off of medical use, producers will ignore this part of the market to focus only on recreational sales.
In the future, after legalization, Health Canada will also continue to support more research and trials.
Provinces Are Setting Their Own Rules For Recreational Sales
Despite early statements, the recreational market is still in the throes of market creation and regulation. The laws are also changing in progress, a situation one regulator has described as building an airplane as it hurtles down the runway for take-off.
Athletes in Canada are still banned from using any kind of cannabis.For example, Ontario, the largest provincial market, is also delaying private sector sales in retail shops until next year. It is also moving away from a government-run dispensary model. Government sales will begin in October, but private dispensaries will have to wait until next April to open their doors (and existing operations will have to close their doors while they apply for licenses). This is also a reversal of the regional government’s position that it would only allow government-controlled shops to sell recreational cannabis.
But perhaps the largest unknown in both national and provincial policy outside of retail brick and mortars is in the area of online sales. A major fight is now brewing in many places where the established industry is now siding with the government about unregistered dispensaries (see Ontario) and established if not registered producers are competing directly with the government not only on main street but online as well.recreational users are beginning to sound alarms that they do not want the government to have so much personal information about them
Retailers with a web presence operating in a grey space will continue to pose a significant challenge to the online system now being implemented by the government for two reasons. Product availability (which will be far more limited on the government-run sites) and privacy.
Beyond the lack of diverse products and strains to be initially offered via the online government portals, recreational users are beginning to sound alarms that they do not want the government to have so much personal information about them – and point specifically to the differences in the regulated alcohol industry vs. the new regulations for the recreational cannabis market.
Beyond Market Rules, There Are Other Guidelines Coming
The Canadian military has now issued guidelines for active duty personnel and cannabis. It cannot ban it from soldiers entirely of course, and as it stands, the situation will be ripe for misunderstandings. For example, soldiers are prohibited from consuming cannabis 8 hours before any kind of duty, 24 hours before the operation of any kind of vehicle or weapon and 28 days before parachuting or serving on a military aircraft.
The only problem, of course, is being able to enforce the same. Cannabinoids, notably THC, can stay in the body for up to 30 days for casual users long after the high is over.
Athletes in Canada are still banned from using any kind of cannabis. The reason? They are subject to the Canadian Anti-Doping Program (CADP) under which the use of cannabis will still be prohibited.
That said, the Canadian Hockey League is reportedly now examining how to revise how it addresses the issue of medical use.
The projected growth of the legal cannabis market is astounding. According to a report from BDS Analytics, the industry is expected to grow from $9.2B to $47.3B in 2027 in North America, with medical cannabis contributing 33% of that overall growth. While this number is impressive for an industry still in its infancy, I have reason to believe it can be much higher.
In the pharmaceutical industry, treatment of pain and insomnia represent an annual revenue exceeding $140B; concurrently, studies have shown cannabis to be an effective treatment for both conditions. If medical cannabis can capture 10% of that revenue over the next ten years, it essentially doubles the current estimates mentioned above.
So, what stands in our way? Education.
To gain acceptance from the medical community, physicians need to better understand the plant and its therapeutic benefits. To do so, they need more substantial data to prove cannabis’ efficacy before prescribing it to their patients. However, federal illegalities have prevented government-mandated clinical studies, but I believe there’s another way.
By adopting a collaborative health care model, patients and caregivers can work together to track the effectiveness of their cannabis treatments and share their learnings with the larger medical community. With the right tools in place, we can fast-track the research process and provide physicians and politicians with the information they need to make this medicine more approachable and accessible to those who could benefit from it.
By harnessing the power of the community, we can apply learnings from one patient’s cannabis use to help countless others.The Spine Patient Outcomes Research Trial (SPORT)was a five-year study consisting of approximately 2500 patients with back and spine conditions. Participants entered qualitative data into an online portal, including post-surgical results and patient outcomes, to provide a comprehensive insight into treatment methods and their efficacy. Today, others suffering with those same conditions can enter their personal information into an online calculator and receive a prospective treatment plan. Together, patients and their doctors can view results and build a customized plan using more informed decisions about the available treatment options.
Another example comes from OpenNotes– an exploratory study that provides patients with full access to their medical files and the opportunity to input comments about their doctor visits and prognosis and make corrections related to the care they received. Results showed that this process helped patients retain a better understanding of their condition which improved their decision making and resulted in increased adherence to treatment plan protocols because they had greater trust with their doctors.Not only will this improve the patient experience by providing a safer, more sustainable treatment option, it also provides a very significant financial opportunity.
I believe the cannabis industry can take a leadership role in empowering patients to become active participants in their own treatment, while also sharing knowledge with the larger patient and physician communities. In fact, this core belief was the reason I founded Resolve Digital Health. Data-empowered patients not only make better decisions but also enjoy a greater feeling of control over their treatment. The power of collaborative healthcare grows exponentially when the data is shared to educate a broader group. By harnessing the power of the community, we can apply learnings from one patient’s cannabis use to help countless others.
Businesses within the cannabis industry can also leverage this data to create new products and services. For example, insights as to what products work best for certain conditions can help LP’s improve their product offerings and guide recommendations from dispensaries. Through product innovation, companies can make cannabis more accessible to a larger group of patients, who may be currently taking pharmaceuticals. Not only will this improve the patient experience by providing a safer, more sustainable treatment option, it also provides a very significant financial opportunity.
Ultimately, knowledge is power. When patients are empowered to make educated decisions about their health care and doctors are more tuned into the patient-tested cannabis treatment options, it’s a win-win for everyone.
According to a press release, the U.S. Food and Drug Administration (FDA) approved GW Pharma’s drug Epidiolex for the treatment of rare forms of epilepsy. Just a few months ago, news broke of a very encouraging FDA panel assessment, which indicated a positive outlook for the drug’s approval.
In the press release, FDA Commissioner Scott Gottlieb, M.D appeared to indicate an open willingness to explore the medical benefits of cannabis. “This approval serves as a reminder that advancing sound development programs that properly evaluate active ingredients contained in marijuana can lead to important medical therapies,” says Gottlieb. “And, the FDA is committed to this kind of careful scientific research and drug development.” He went on to add:
Controlled clinical trials testing the safety and efficacy of a drug, along with careful review through the FDA’s drug approval process, is the most appropriate way to bring marijuana-derived treatments to patients. Because of the adequate and well-controlled clinical studies that supported this approval, prescribers can have confidence in the drug’s uniform strength and consistent delivery that support appropriate dosing needed for treating patients with these complex and serious epilepsy syndromes. We’ll continue to support rigorous scientific research on the potential medical uses of marijuana-derived products and work with product developers who are interested in bringing patients safe and effective, high quality products. But, at the same time, we are prepared to take action when we see the illegal marketing of CBD-containing products with serious, unproven medical claims. Marketing unapproved products, with uncertain dosages and formulations can keep patients from accessing appropriate, recognized therapies to treat serious and even fatal diseases.
According to the press release, the drug was studied in three randomized, double-blind, placebo-controlled clinical trials with 516 patients who have either Lennox-Gastaut syndrome or Dravet syndrome, the two rare forms of epilepsy the drug is now approved to treat. Epidiolex is an anti-epilepsy drug, taken in a syrup form, with the main active ingredient being cannabidiol (CBD), and less than 0.1 % THC.
Are you a product designer in the edible cannabis market? Well, you live at the intersection of the food and pharmaceutical industries and need to know both worlds, utilizing best-practice product development principles, regardless of which industry you are working in. In the cannabis industry, this means knowing your chemistry principles, food science, food safety, Good Manufacturing Practices (GMPs, applicable to the food industry) along with the more intense records and documentation requirements of the pharmaceutical industry.
California is the most recent state to implement legal recreational cannabis. It is estimated to deliver $7.7B in sales by 2021, including a reduction of medical use cannabis and an uptake of adult recreational use. How often do you live at the inception of such a potentially enormous market? Not often, so product developers, here is an opportunity. However, with that opportunity comes the responsibility. A recent emergency legislation adopted by the California Cannabis Safety Branch states:
Operational Requirements Licensees must have written procedures for inventory control, quality control, transportation, security and cannabis waste disposal. Descriptions of these procedures or Standard Operating Procedures (SOPs) must be submitted with the annual license application. Cannabis waste cannot be sold, must be placed in a secured area and be disposed of according to applicable waste management laws. Good manufacturing practices must be followed to ensure production occurs in a sanitary and hazard-free environment, cannabis products are contaminant free and THC levels are consistent throughout the product and within required limits. Extractions using CO2 or a volatile solvent must be conducted using a closed-loop system, certified by a California-licensed engineer. Volatile, hydrocarbon-based solvents must have at least 99% purity. Finally, volatile solvent, CO2 and ethanol extractions must be certified by the local fire code official.
Part of this emergency legislation for all California cannabis product manufacturers is the newly published GMP requirements, which appear to be a combination of food, supplements and HACCP requirements. Helpful resources to learn more about this new California emergency legislation impacting cannabis product manufacturers can be found at the California Manufactured Cannabis Safety Branch with the details of the emergency cannabis regulations.
Once developers have decided on a product, research and education to develop a good understanding of the regulatory environment is a must. For example, in order to develop compliant cannabis edibles, compliance with state, and in some cases local regulations, for food and cannabis must be met. Proactive compliance is a big part of designing a successful product in the most efficient manner.The attention to detail here will create a safe and satisfying experience for consumers as they receive a consistent product every time.
As a product developer you must first know the incoming cannabis plant characteristics to determine what type of cannabinoids they contain to determine what types you wish to source. This requires a strong and well documented supplier program that can identify reliable suppliers of high purity and consistent cannabis raw materials, the same principles that are typically required of food manufacturers. When looking for examples of credible ingredient supplier programs, looking at those used by the food industry is a good start. Make sure supplier management programs apply to all the raw materials and direct-contact packaging that you plan to use in your new product.
Once reliable sources of raw material have been secured, the next challenge is to conduct periodic tests of cannaboids levels found in your incoming cannabis. With this information, you need to adjust blending amounts to reflect the correct cannaboid dose in the finished ready-to-eat (RTE) product. Like any other medicinal product, the active ingredient dosage will directly impact the effect on the consumer, thus it is important that you, the manufacturer, are completely aware of the exact cannaboid levels in your incoming ingredients, your blending amounts and your final product levels. This will require a robust either in-plant or commercial laboratory testing program. There is a great deal of technology and chemical analyses available to help dose the product accurately. This must also include robust testing and verification steps. If a consumer of your product were to over-consume from “normal” consumption rates of your cannabis-based food product, the liability, both financial, civil, ethical and criminal would fall on your company. The attention to detail here will create a safe and satisfying experience for consumers as they receive a consistent product every time.
design your products with commercial manufacturing viability in mindOnce regulatory responsibilities for manufacturing and marketing a cannabis-based food product have been met, so that you may sell a compliant and consistent product, it is time to add some creative juices and make the product interesting and enjoyable to consumers. With cannabis edibles, for example, explore what sort of food is appealing to consumers. Consider when, where and with whom your potential customers would be eating that food. Evaluate the best packaging design and size to suit the occasion. Ensure the packaging is child resistant yet practical for adult consumers. And above all manufacture a food that is delicious. Curiosity will attract your customers for the first time but quality and consistency will keep them coming back.
Product developers are usually fantastic at developing great lab scale products, but part of a developer’s job is to ensure that the design and manufacturing process is scalable for consistent and compliant commercial manufacturing. So design your products with commercial manufacturing viability in mind. Try to minimize the number of ingredients whilst still making a consumer-desirable product. Finally, rationalize your ingredients across your portfolio to avoid overcrowding the warehouse and risking expired ingredients.
If successful, your consumers will desire your product, your compliance team will be satisfied, your manufacturing partners will be thankful, the State of California will determine that you are fully compliant and your sales team’s job will have great business and professional success. In the end, you will have developed and launched a successful legacy product!
Pennsylvania’s medical cannabis program may be young, but the industry in that state is off to a burgeoning start. Back in 2016, the state legalized medical cannabis. In 2017, the PA Department of Health began accepting applications for licenses and announced the first 12 winning applications. On February 15th, 2018, medical cannabis became available for more than 17,000 patients that registered in the program.
In March of this year, Governor Tom Wolf announced two more dispensaries were approved to operate as well as another grower/processor licensee. At that time, the press release indicated more than 21,000 patients have registered to participate in the medical cannabis program.
Then in April, Governor Wolf announced Phase Two of their medical cannabis program, allowing the industry to grow even more. That allowed for 13 new grower/processor permits and 23 new primary dispensary permits, according to a press release, which moved the total up to 25 grower/processors licensees and 50 dispensary licensees.
On May 15th, Governor Wolf approved eight universities to participate in a groundbreaking program, allowing Pennsylvania to take the first steps towards clinical research for medical cannabis. This research program would be the first of its kind in the country, allowing research institutions to explore the drug. The excitement was put on hold, however, when a Pennsylvania judge halted the program with an injunction. A handful of growers and dispensary owners in PA filed suit to stop the program on grounds that it violated the original intent of the law. State Representative Kathy Watson from Bucks County, the author of the research program, called the suit “pathetic because it’s all about the money.” We’ll follow closely with any new developments as they come.
Steve Schain, Esq. practicing at the Hoban law Group
Steven Schain, Esq., senior attorney at Hoban Law Group, a global cannabis law firm, represents multiple cannabis-related businesses in Pennsylvania. He says the program’s roll out has been fast with solid growth. “Within two years of the legislation’s enactment, Pennsylvania’s medical marijuana program has exceeded expectations with controlled, sustainable and quality growth,” says Schain. “The Pennsylvania Department of Health established ambitious goals, which they met timely and created a statewide program servicing over 10,000 patients in record time. Looming ahead is New Jersey’s adult use program, the anticipated robustness of which could undermine vigorous sales in southeastern Pennsylvania’s marijuana-related businesses.”
On May 30th, Philadelphia welcomed their first medical cannabis dispensary, with a location opening up their doors to patients in Fishtown. Now reports are coming in that say more than 37,000 patients have registered to date, with over 16,000 who have received their ID cards and medical cannabis at a dispensary.
Even though the research program might be on hold for now, Pennsylvania’s medical cannabis program is growing at a fast pace. The market there has blossomed in just a few short months to a whopping 37,000-registered patients, according to a press release form Governor Wolf’s office. Some say an additional 200,000 patients could qualify. With the second phase in sight, it seems Pennsylvania is on track to become a hotbed for business and research, developing into a massive medical cannabis marketplace soon. Stay tuned for more updates.
By Dr. Allison Justice, Vice President of Cultivation at Outco
This presentation discusses:
Prized French wines are aged for years in oak barrels, as are famous whiskies. Tobacco is air-, fire-, flue- or sun-cured. Cannabis, however, is quickly dried and stored in a plastic bucket. Although many cannabis growers have proprietary ways of making flower flavorful and aromatic, little to no research is available for consistency.
Anecdotal examples show that chemical makeup is not only dictated by the strain/cultivar, but also influenced by grow methods, drying and curing. The lack of data prompted us to research what is happening during these processes. In this session, we will present our research at OutCo of how to affect and control the chemical makeup of flower; new protocols to monitor the dry and cure of cannabis flowers so we are able to modulate the terpene and cannabinoid profiles in our strain offering; and our latest findings in this exciting field of post-harvest cannabis research.
By Dr. Zacariah Hildenbrand, Dr. Kevin A. Schug No Comments
Much has been made about the plummeting market value of cannabis grown outdoors in Oregon. This certainly isn’t a reflection of the product quality within the marketplace, but more closely attributable to the oversaturation of producers in this space. This phenomenon has similarities to that of ‘Tulip Mania’ within the Dutch Golden Age, whereby tulip bulbs were highly coveted assets one day, and almost worthless the next. During times like these, it is very easy for industry professionals to become disheartened; however, from a scientific perspective, this current era in Oregon represents a tremendous opportunity for discovery and fundamental research.
Dr. Zacariah Hildenbrand, chief technical officer at Inform Environmental.
As we have mentioned in previous presentations and commentaries, our research group is interested in exploring the breadth of chemical constituents expressed in cannabis to discover novel molecules, to ultimately develop targeted therapies for a wide range of illnesses. Intrinsically, this research has significant societal implications, in addition to the potential financial benefits that can result from scientific discovery and the development of intellectual property. While conducting our experiments out of Arlington, Texas, where the study of cannabis is highly restricted, we have resorted to the closet genetic relative of cannabis, hops (Humulus lupulus), as a surrogate model of many of our experiments (Leghissa et al., 2018a). In doing so, we have developed a number of unique methods for the characterization of various cannabinoids and their metabolites (Leghissa et al., 2018b; Leghissa et al., 2018c). These experiments have been interesting and insightful; however, they pale in comparison to the research that could be done if we had unimpeded access to diverse strains of cannabis, as are present in Oregon. For example, gas chromatography-vacuum ultraviolet spectroscopy (GC-VUV) is a relatively new tool that has recently been proven to be an analytical powerhouse for the differentiation of various classes of terpene molecules (Qiu et al., 2017). In Arlington, TX, we have three such GC-VUV instruments at our disposal, more than any other research institution in the world, but we do not have access to appropriate samples for application of this technology. Similarly, on-line supercritical fluid extraction – supercritical fluid chromatography – mass spectrometry (SFE-SFC-MS) is another capability currently almost unique to our research group. Such an instrument exhibits extreme sensitivity, supports in situ extraction and analysis, and has a wide application range for potential determination of terpenes, cannabinoids, pesticides and other chemical compounds of interest on a single analytical platform. Efforts are needed to explore the power and use of this technology, but they are impeded based on current regulations.
Dr. Kevin A. Schug, Professor and the Shimadzu Distinguished Professor of Analytical Chemistry in the Department of Chemistry and Biochemistry at The University of Texas at Arlington (UTA)
Circling back, let’s consider the opportunities that lie within the abundance of available outdoor-grown cannabis in Oregon. Cannabis is extremely responsive to environmental conditions (i.e., lighting, water quality, nutrients, exposure to pest, etc.) with respect to cannabinoid and terpene expression. As such, outdoor-grown cannabis, despite the reduced market value, is incredibly unique from indoor-grown cannabis in terms of the spectrum of light to which it is exposed. Indoor lighting technologies have come a long way; full-spectrum LED systems can closely emulate the spectral distribution of photon usage in plants, also known as the McCree curve. Nonetheless, this is emulation and nothing is ever quite like the real thing (i.e., the Sun). This is to say that indoor lighting can certainly produce highly potent cannabis, which exhibits an incredibly robust cannabinoid/terpene profile; however, one also has to imagine that such lighting technologies are still missing numerous spectral wavelengths that, in a nascent field of study, could be triggering the expression of unknown molecules with unknown physiological functions in the human body. Herein lies the opportunity. If we can tap into the inherently collaborative nature of the cannabis industry, we can start analyzing unique plants, having been grown in unique environments, using unique instruments in a facilitative setting, to ultimately discover the medicine of the future. Who is with us?
References
Leghissa A, Hildenbrand ZL, Foss FW, Schug KA. Determination of cannabinoids from a surrogate hops matrix using multiple reaction monitoring gas chromatography with triple quadrupole mass spectrometry. J Sep Sci 2018a; 41: 459-468.
Leghissa A, Hildenbrand ZL, Schug KA. Determination of the metabolites of Δ9-Tetrahydrocannabinol using multiple reaction monitoring gas chromatography – triple quadrapole – mass spectrometry. Separation Science Plus 2018b; 1: 43-47.
Leghissa A, Smuts J, Changling Q, Hildenbrand ZL, Schug KA. Detection of cannabinoids and cannabinoid metabolites using gas chromatography-vacuum ultraviolet spectroscopy. Separation Science Plus 2018c; 1: 37-42.
Qiu C, Smuts J, Schug KA. Analysis of terpenes and turpentines using gas chromatography with vacuum ultraviolet detection. J Sep Sci 2017; 40: 869-877.
Last week, the 4th annual Emerald Conference brought attendees from around the world to San Diego for two days of education, networking and collaboration. Leading experts from across the industry shared some of the latest research in sessions and posters with over 600 attendees. The foremost companies in cannabis testing, research and extraction brought their teams to exhibit and share cutting edge technology solutions.
Ken Snoke, president of Emerald Scientific, delivers the opening remarks
The diversity in research topics was immense. Speakers touched on all of the latest research trends, including tissue culture as a micropropagation technique, phenotype hunting, pharmaceutical product formulation, chromatography methods and manufacturing standards, to name a few.
On the first day of the event, Ken Snoke, president of Emerald Scientific, gave his opening remarks, highlighting the importance of data-driven decisions in our industry, and how those decisions provide the framework and foundation for sound progress. “But data also fuels discovery,” says Snoke, discussing his remarks from the event. “I told a story of my own experience in San Diego almost 30 years ago while working in biotech, and how data analysis in a relatively mundane and routine screening program led to discovery. And how we (the folks at Emerald) believe that when we get our attendees together, that the networking and science/data that comes from this conference will not only support data-driven decisions for the foundation of the industry, but it will also lead to discovery. And that’s why we do this,” Snoke added.
Arun Apte, CEO of CloudLIMS, discusses his poster with an attendee
Snoke says the quality of the content at the poster session was phenomenal and engaging. “We had over 500 attendees so we continue to grow, but it’s not just about growth for us,” says Snoke. “It’s about the quality of the content, and providing a forum for networking around that content. I met a scientist that said this conference renewed his faith in our industry. So I firmly believe that the event has and will continue to have a profound and immensely positive impact on our industry.”
Introducing speakers as one of the chairs for first session focused on production, Dr. Markus Roggen says he found a number of speakers delivered fascinating talks. “This year’s lineup of presentations and posters really showcase how far the cannabis industry has come along,” says Dr. Roggen. “The presentations by Roger Little, PhD and Monica Vialpando, PhD, both showed how basic research and the transfer of knowledge from other industries can push cannabis science forward. Dr. Brian Rohrback’s presentation on the use of chemometrics in the production of pharmaceutical cannabis formulations was particular inspiring.”
Roger Little, Ph.D., owner of CTA, LLC, presents his research
Shortly after Snoke gave his opening remarks, Dr. Roggen introduced the first speaker, Roger Little, Ph.D., owner of CTA, LLC. He presented his research findings on phenotype hunting and breeding with the help of a cannabis-testing laboratory. He discussed his experience working with local breeders and growers in Northern California to identify high-potency plants early in their growth. “You can effectively screen juvenile plants to predict THC potency at harvest,” says Dr. Little. The other research he discussed included some interesting findings on the role of Methyl jasmonate as an immune-response trigger. “I was looking at terpenes in other plants and there is this chemical called methyl jasmonate,” says Dr. Little. “It is produced in large numbers of other plants and is an immune response stimulator. This is produced from anything trying to harm the plant such as a yeast infection or mites biting the stem.” Dr. Little says that the terpene has been used on strawberries to increase vitamin C content and on tobacco plants to increase nicotine content, among other uses. “It is a very potent and ubiquitous molecule,” says Dr. Little. “Cannabis plants’ immune-response is protecting the seeds with cannabinoid production. We can trick plants to think they are infected and thus produce more cannabinoids, stimulating them to produce their own jasmonate.”
Dr. Hope Jones, chief scientific officer of C4 Laboratories, spoke about tissue culture as an effective micropropagation technique, providing attendees with a basic understanding of the science behind it, and giving some estimates for how it could effectively replace cloning and the use of mother plants. You could overhear attendees discussing her talk throughout the remainder of the show.
Dr. Hope Jones, chief scientific officer at C4 Laboratories, discusses tissue culture during her talk
Dr. Jones has worked with CIJ on a series of articles to help explain cannabis tissue culture, which you can find here. “In this example, we started with one vessel with 4 explants,” says Dr. Jones. “Which when subcultured 4-6 weeks later, we now have 4 vessels with 16 plants.” She says this is instrumental in understanding how tissue culture micropropagation can help growers scale without the need for a ton of space and maintenance. From a single explant, you can potentially generate 70,000 plants after 48 weeks, according to Dr. Jones.
Those topics were just the first two of many presentations at Emerald Conference. You can take a look at some of the other presentation abstracts in the agenda here. The 5th Annual Emerald Conference in 2019 will be held February 28th through March 1st in San Diego next year.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
As in other countries, in other words, while the news of exports beginning to enter the market is good for patients and the industry beyond that, it is just a start to a longer battle that is still playing out across Europe.
