Tag Archives: retail

Two Recalls Hit California Cannabis Market

By Aaron G. Biros
No Comments

Just weeks ago, the first voluntary cannabis product recall occurred under California’s new regulations. According to an article on MJBizDaily.com by John Schroyer, the recall for their vaporizer cartridges affects almost 100 dispensaries in California.

Bloom Brands, the company issuing the voluntary recall, mentioned in a press release that batches sold between July 1-19, 2018 were contaminated with the pesticide Myclobutanil and therefore does not meet the Bureau of Cannabis Control (BCC) standards. Below is an excerpt from the press release:

We are working closely with the BCC to remedy this issue and expect clean, compliant products to be back on shelves in three weeks…. At Bloom, we are continuing to work with the BCC and other partners to ensure that the space is properly regulated and safe for all customers. Transparency and safety remain our top concerns and we will provide updates as additional information becomes available. We apologize for any concern or inconvenience this serious misstep has caused. We thank you for your continued trust and confidence in our products.

Then, just days later, Lowell Herb Co. issued a voluntary recall on their pre-rolls. First reported by MJBizDaily.com, it appears the products initially passed multiple lab tests and was cleared for retail sales. Weeks after the batch passed tests, a laboratory reversed its decision, saying the products failed to pass the state’s testing standards. The contaminant in question was not mentioned.

The CCIA post calling out the BCC
The CCIA post calling out the BCC

Many seem to think these recalls are a product of the BCC’s unrealistic expectations in their lab testing rules. In a Facebook post days ago, the California Cannabis Industry Association called out the BCC for their unworkable rules. “The BCC has set testing standards that are nearly impossible to meet,” reads the post. “As a result recalls like this will be the norm and the industry will suffer a bottleneck in supply. Testing standards need to be realistic, not impossible.”

On July 13, California issued the first draft of their proposed permanent regulations, which would update and change the current emergency regulations. The proposed action levels for a batch to pass a pesticide test can be found on pages 105 and 106. The state’s regulatory bodies are holding public meetings on the proposed rules throughout August and stakeholders can also submit comments via email.

Soapbox

5 Things You Can Do To Get the Most Value From Your Consultant

By Vince Sebald
1 Comment

I worked for about 18 years as a company employee in various levels from entry-level engineer to senior director. Since then I have spent over a decade as a consultant in the life science industry as the founder of Sebald Consulting. Presently, I also use consultants as CEO of GxPready!, a web based CMMS software company. Based on this experience, I have put together a top 5 list of things you can do to get the most value when using consultants:

1. Recognize when a project requires a consultant

There can be several reasons a project may benefit from having a consultant which may include bringing a new skill set, industry experience or an outside perspective to bear on a project that is not available otherwise.

Provide clear guidance as to what the task and deliverables are on an ongoing basis.Also, there are occasions when resources are already stretched and you need short-term support to get through an intensive segment of a project, but the work may not be enough to justify additional longer-term resources.

In any of these cases, filling the gap internally can be difficult and time consuming. A consultant can be a great solution. Even if you don’t plan to use a consultant for the project, it may be to your benefit to have a consultant perform a “gap assessment” to help you to identify areas which require improvement to meet compliance requirements or best practice guidelines. This is often done to prepare for audits, for example.

2. Vet the consultant to get a good match

Contact potential consultants to determine if they have the set of skills you are looking for and if they fit within the culture of your organization. Talk to the actual consultant you will be working with before bringing them on.  Review the consulting contract carefully to make sure the terms are mutually acceptable.  Often consultants have some flexibility to accommodate different project situations.

One advantage to using consultants is that you don’t have a long commitment so even after you vet them with interviews, you can work on small projects and gauge the results. Some consulting companies are very formal and others are less so, for example. A good fit is better for both parties. It’s not just the competence, but the culture and personal fit with your team.

3. Provide the consultant with appropriate guidance and resources

Help the consultant give you the best results possible by providing access to the resources (personnel, information, documents, systems, etc.) to allow the consultant to perform the tasks.

Consultants can help you get through unfamiliar territory or help you to manage your team’s workload. Know how to use these resources to benefit your projects. This project manager called just in time.

Provide clear guidance as to what the task and deliverables are on an ongoing basis.

Alternatively, allow the consultant to manage the project and reach out as necessary. Any guidance and resources you can provide the consultant will increase the effectiveness and help control your costs on the project.

If you don’t know exactly what needs to be done (“That’s why I hired a consultant!”) then have the consultant put together a list for you based on some general guidance and then work from that list to get your job completed.

4. Track progress with appropriate level of detail

If you have vetted and hired a consultant, chances are they are going to put in their best effort to meet your requirements. Nonetheless, it is good practice to have a system in place to track hours/costs.

Whether it is weekly reporting, or based on milestones and project updates, this helps to avoid any misunderstandings and provides opportunities for communication of project issues in addition to whatever project updates may be scheduled.

You want your team of consultants and employees to be able to work as well as possible together.Recognize that you can go overboard in this area, working against yourself and the project, if the tracking is so detailed that it takes excessive resources to document. It is definitely possible to inadvertently generate more hours (and expense) by managing time in too much detail. If the concern is high and heavy management is required, perhaps that indicates the consultant is not the best match for this project.

Generally, you can find a good balance with a simple up-front chat with the consultant to review your expectations, and for larger projects it is often formalized in the contract.

5. Recognize if it’s not a good fit

There are many consultants and clients out there. Inevitably, there are times when, despite best intentions, the consultant/client mix isn’t working out. Make sure the contract allows for management of this situation. Can you cancel the contract with reasonable notice? Is there a mechanism for being able to replace members of the team that aren’t working out?

You want your team of consultants and employees to be able to work as well as possible together. If that’s not happening, recognize it and make adjustments as necessary. But don’t lose the contact information. A consultant that doesn’t work out today may be just right for your next project!

Following the above can improve your chances of success with consultants you may hire and allow you to build a solid set of resources you can call on from time to time as things change in your company. Consultants can fill a vital role for tasks requiring specialized skills or short-term projects where a full time hire is not practical.

Maureen Smyth headshot
Soapbox

Raising the Standard for Dispensary Education: Building a Better Budtender

By Maureen Smyth
No Comments
Maureen Smyth headshot

At the National Cannabis Industry Association’s (NCIA) Cannabis Business Summit and Expo last week there was a presentation titled, “Raising the Standard for Dispensary Education: Building a Better Breed of Budtender.” Speakers included Adam Cole, learning and development specialist at Native Roots Dispensaries and Dr. Aseem Sappal, provost and dean of faculty at Oaksterdam University. Nancy Whiteman, owner of Wana Brands, was the moderator. Let’s look at some of the ways they have standardized their process in cannabis retail education.Health effects achieved in one patient are not always replicated for every patient. This is true of all medicine.

The standard education module at Native Roots (20 retail locations throughout Colorado, and were awarded licenses in Manitoba, Canada) for onboarding a budtender includes laws and compliance, ID checking and sales limits, customer service and physical effects. Oaksterdam University provides cannabis education and focuses on botany, introduction to the endocannabinoid system, bioavailability, CBD, and edibles vs. smoking as a delivery mechanism. In addition to the already mentioned classes, Wana Brands also teaches the concept of sustained release and capsules (due to product specificity). The Native Roots educational program contains continuing education in the history of cannabis, the endocannabinoid system, methods of consumption, phytocannabinoids and terpenes. For those of you in medical professions beginning your cannabis education, these modules provide a great outline to launch your own learning and development program.

How can dispensaries integrate the medical profession at the point of distribution?The presentation highlighted the legal aspects of providing cannabis information and cannabis products. A licensed medical professional oversees all educational content and everything is run through a legal department. It is important that all cannabis providers use language that offers no definitive medical outcomes. Health effects achieved in one patient are not always replicated for every patient. This is true of all medicine. At Native Roots Dispensary, they address symptoms not diseases. They have specific language to avoid giving medical advice. For good reason, there is a state regulatory body called the Marijuana Enforcement Division (MED) that oversees dispensaries and their adherence to the “no medical advice” decree, along with a slew of other regulatory compliance issues.

Dispensaries offer careful symptom-based product recommendations to many types of consumers. How can dispensaries integrate the medical profession at the point of distribution? Native Roots has partnerships with doctors and the Rocky Mountain Cancer Institute. Additionally, the CEO of Wana Brands mentioned the use of medical kiosks in some dispensaries. My question to Adam Cole was, “Would you like to see trained cannabis nurses on staff or on board as a consultant in dispensaries to deal with patients and have the budtenders service the customer?” His answer: “Absolutely.”

TOK_logo

Tree of Knowledge Inc. Acquires 5% of NYSK Holdings

By Marguerite Arnold
No Comments
TOK_logo

The Canadian cannabis community has just gotten a new member. Tree of Knowledge, Inc. just became Canada’s newest public cannabis company. The company is also planning on raising $10 million in private placement capital. According to the company’s most current pitch deck, the planned use of proceeds includes $6.5 million for new capex expenditures in Canada and Macedonia plus new product development. The rest is slated for patient and doctor outreach including via social media, new hires and working capital.

Who Is Tree of Knowledge Inc.?

Founded originally in Washington State in 2015, today TOK has a global market presence with CBD products on three continents and is already positioning itself to run with the big boys on the international scene, just on its CBD footprint. In the online marketplace, they are doing business as EVR CBD. That includes state markets in the United States, Europe, South America, Australia and China.

The company also has a distinguished board that includes doctors to former professional sports stars. As of April, the company engaged in a reverse merger with Courtland Capital, a Nevada subsidiary company.TOK_logo

And as of July 2018, the company purchased 5% of NYSK Holdings – a rapidly establishing Macedonian start-up with an eye to the European market – starting with Germany.

Who Is NYSK Holdings?

NYSK Holdings is absolutely on an upward trajectory. The company, founded by Americans with strong ties to the home country along with local partners, broke ground in Skopje, Macedonia last year.

Company principals have been exploring entry into the European market ever since (Macedonia may be in the Balkans, but it is technically not part of the EU). Significantly, this also means that producers there are used to meeting European specs for import purposes, if not hopeful EU inclusion.

NYSK holdingsLike other EU partners in the west however, (notably Spain and Portugal) labour rates are also much lower than in Germany. This creates a new avenue into the EU and the German market, which is now going to be an import-dominant one until 2020.

What is even more interesting about NYSK? They produce GMP-certified product – both THC and CBD. They have been looking for partners for most of this year. They also had a booth at the ICBC in Berlin, an experience that they found highly satisfactory.

Their strategic importance to TOK is also large. NYSK brings, for the first time, THC products and high-tech processing capacity adjacent to the European Union to a firm with a global footprint.

They might, in other words, have been Europe’s most under-priced production facility. Don’t expect that to last long.

What Is Interesting About The Move

One glance at TOK’s founders, board, andadvisors is enough to establish that this is a company of mostly older Gen X and younger Boomer heavy hitters from other industries who are pooling resources and knowledge to step into a global medical cannabis space. Smartly.

For example, the focus on dosing control, trials and an operational, GMP-certified production facility in Macedonia, plus their Canadian footprint, makes TOK and their partners well suited for “European invasion.” So does their first product – a CBD-based sleep aid.

NYSK facility
The cultivation of cannabis at the NYSK facility in Macedonia

This creates, in other words, a company with Canadian and Macedonian production, American entry and global reach, including into countries other cannabis companies have so far not breached (see China), with an interesting, low-cost, lower risk entry profile. Their expanded market entry is also occurring right at a time when Europe, including the about to be Brexited UK, is now moving forward on medical reform sans very much local production.

Perhaps this comes from the experience of the principals. TOK Cofounder Michael Caridi started his involvement in the cannabis industry in Washington State in 2014 after a successful real estate and promotions career on the East Coast (New York) and experience in ex-im. However, Caridi rapidly grew disillusioned with the state’s focus if not an obsessionon a more recreational space than medical users. He and Brian Main, now president of US operations, founded TOK a year later. Current CEO, John-Paul Gaillard, has a history that includes the creator of the Marlboro Classics brand and a stint as the CEO of Nestle Nespresso who put the idea on the map if not kitchen counters globally.

No newbies here when it comes to global market strategies, penetration and experience.

Both companies to watch, for sure.

labsphoto

EVIO Labs Expands Ahead of California Testing Deadline

By Aaron G. Biros
No Comments
labsphoto

In a few short weeks, the regulations in California’s cannabis market will expand to include more laboratory testing. The previous exemption for selling untested product will be eliminated come July 1st, meaning that every product on dispensary shelves will have to be tested for a number of contaminants.

EVIO labs photo
Pesticide testing, expanded residual solvent testing and foreign materials testing will be added come July 1st.

According to William Waldrop, chief executive officer and co-founder of EVIO Labs, the state is currently finalizing a revision to the existing emergency rules, which is designed to target the potential supply bottleneck situation. “To help alleviate the bottleneck, the state is eliminating the field duplicate test on every batch of cannabis or cannabis products,” says Waldrop. “This will give the labs additional bandwidth to process more batches for testing.” So one test per batch is the rule now and batch sizes will remain the same. This, of course, is contingent on the state finalizing that revision to the emergency regulations.

William Waldrop, chief executive officer and co-founder of EVIO Labs
William Waldrop, chief executive officer and co-founder of EVIO Labs

In addition to that change, the state will expand the types of testing requirements come July 1st.  New mandatory pesticide testing, expanded residual solvent testing and foreign materials testing are added in addition to the other tests already required.

With July 1st quickly approaching, many in California fear the rules could lead to a major market disruption, such as the previously mentioned bottleneck. Waldrop sees the elimination of duplicate testing as a preventative measure by the state. “It is a good move for the industry because it allows labs to test more batches, hopefully reducing the bottleneck come July,” says Waldrop. Still though, with only 26 licensed laboratories in the state as of March, testing facilities will have to meet higher demand, performing more tests and working with more clients.

EVIO Labs is preparing for this in a number of ways. They already have a lab in Berkeley and are working to expand their capacity for more analyses. In addition to their lab in Berkeley, the company is working to get three more locations operational as quickly as possible. “Right now, EVIO Labs is expanding through the identification of new market locations,” says Waldrop. “We have announced the acquisition of a facility in Humboldt and we are outfitting it for state-mandated testing. We have secured a location in LA, and licensing for LA just began as of June 1stso we are going through the local licensing process at this time. We are still moving through the licensing process for our facility in Costa Mesa as well.”

EVIO Labs photo
Labs will soon have to deal with higher demand, meaning more samples and more clients

“In the meantime, we have expanded capacity of personnel in our Berkeley facility to support our client base until these other locations come online,” says Waldrop. “We are refining our business, bringing on additional equipment and more resources.” While the rules haven’t been implemented yet, Waldrop says he’s seen an uptick in business with licensed operators requesting more testing for the new July 1st standards.

While some might feel a bit panicky about how the new standards could disrupt the market, Waldrop says his clients are looking forward to it. “Our clients are very happy with the proposed new rules, because it reduces the cost of testing per batch, which will inherently reduce wholesale costs, making cannabis more affordable for patients and recreational users.”

Pennsylvania Medical Cannabis Program Blossoms

By Aaron G. Biros
1 Comment

Pennsylvania’s medical cannabis program may be young, but the industry in that state is off to a burgeoning start. Back in 2016, the state legalized medical cannabis. In 2017, the PA Department of Health began accepting applications for licenses and announced the first 12 winning applications. On February 15th, 2018, medical cannabis became available for more than 17,000 patients that registered in the program.

In March of this year, Governor Tom Wolf announced two more dispensaries were approved to operate as well as another grower/processor licensee. At that time, the press release indicated more than 21,000 patients have registered to participate in the medical cannabis program.

Then in April, Governor Wolf announced Phase Two of their medical cannabis program, allowing the industry to grow even more. That allowed for 13 new grower/processor permits and 23 new primary dispensary permits, according to a press release, which moved the total up to 25 grower/processors licensees and 50 dispensary licensees.

Just weeks later after that announcement, the PA Department of Health adjusted their program to allow patients access to whole plant, dried flower and opened up more qualifying conditions. The qualifying conditions added to the list now include cancer remission therapy as well as opioid-addiction therapy, which are two very notable additions. According to an April 6threport, 28,508 patients and 2495 caregivers registered with the program.

On May 15th, Governor Wolf approved eight universities to participate in a groundbreaking program, allowing Pennsylvania to take the first steps towards clinical research for medical cannabis. This research program would be the first of its kind in the country, allowing research institutions to explore the drug. The excitement was put on hold, however, when a Pennsylvania judge halted the program with an injunction. A handful of growers and dispensary owners in PA filed suit to stop the program on grounds that it violated the original intent of the law. State Representative Kathy Watson from Bucks County, the author of the research program, called the suit “pathetic because it’s all about the money.” We’ll follow closely with any new developments as they come.

Steve Schain, Esq. practicing at the Hoban law Group

Steven Schain, Esq., senior attorney at Hoban Law Group, a global cannabis law firm, represents multiple cannabis-related businesses in Pennsylvania. He says the program’s roll out has been fast with solid growth. “Within two years of the legislation’s enactment, Pennsylvania’s medical marijuana program has exceeded expectations with controlled, sustainable and quality growth,” says Schain. “The Pennsylvania Department of Health established ambitious goals, which they met timely and created a statewide program servicing over 10,000 patients in record time. Looming ahead is New Jersey’s adult use program, the anticipated robustness of which could undermine vigorous sales in southeastern Pennsylvania’s marijuana-related businesses.”

On May 30th, Philadelphia welcomed their first medical cannabis dispensary, with a location opening up their doors to patients in Fishtown. Now reports are coming in that say more than 37,000 patients have registered to date, with over 16,000 who have received their ID cards and medical cannabis at a dispensary.

Even though the research program might be on hold for now, Pennsylvania’s medical cannabis program is growing at a fast pace. The market there has blossomed in just a few short months to a whopping 37,000-registered patients, according to a press release form Governor Wolf’s office. Some say an additional 200,000 patients could qualify. With the second phase in sight, it seems Pennsylvania is on track to become a hotbed for business and research, developing into a massive medical cannabis marketplace soon. Stay tuned for more updates.

Massachusetts Prepares for Adult-Use

By Aaron G. Biros
No Comments

Last month, the Cannabis Control Commission, the regulatory body overseeing Massachusetts’ newest industry, finalized their regulations for the market. At the beginning of this month, the state began accepting applications for business licenses. Now with the full implementation of adult-use sales on the horizon, businesses, regulators, consumers and local governments are preparing themselves for the legalization of adult-use cannabis. Sales are expected to begin June 1st.

On March 29th, the Cannabis Control Commission announced their finalized rules were filed, published and took effect. Leading up to the filing, the Commission reports they held 10 listening sessions, received roughly 500 public comments and conducted 7 hearings for roughly 150 policy decisions. The license categories that businesses can apply for include cultivator, craft marijuana cooperative, microbusiness, product manufacturer, independent testing laboratory, storefront retailer, third-party transporter, existing licensee transporter, and research facility, according to the press release.

What separates Massachusetts’ rules from other states’ rules are a few of the license categories as well as environmental regulations, as Kris Kane highlights in this Forbes article. Experimental policies, like the microbusiness and craft marijuana co-op licenses, Kane says, are some tactics the Commission hopes may help those affected by the drug war and those who don’t have the capital and funding required for the larger license types.This is a groundbreaking reform previously unseen in states that have legalized cannabis. 

The Commission will also establish a Social Equity Program, as outlined in the final rules (section 17 of 500.105). That program is designed to help those who have been arrested of a cannabis-related crime previously or lived in a neighborhood adversely affected by the drug war. “The committee makes specific recommendations as to the use of community reinvestment funds in the areas of programming, restorative justice, jail diversion, workforce development, industry-specific technical assistance, and mentoring services, in areas of disproportionate impact,” reads one excerpt from the rules (section 500.002) identifying the need for a Citizen Review Committee, which advises on the implementation of that Social Equity Program.

This is a groundbreaking reform previously unseen in states that have legalized cannabis. Massachusetts may very well be the first state to actively help victims of the prohibition of cannabis.Some municipalities are hesitant and skeptical, while others are fully embracing the new industry with open arms.

For environmental rules, Kane notes the Commission is taking unprecedented steps to address energy usage in the cultivation process, pushing the industry to think about environmental sustainability in their bottom line and as part of their routine regulatory compliance. He says the Commission mandates a 36 watts-per-square-foot maximum for indoor cannabis cultivators.

On Monday, April 2nd the state began accepting applications for businesses seeking licensure. Within a few days, nearly 200 businesses have applied. That number is expected to grow significantly over the next few weeks.

While businesses continue applying for licenses, local governments are preparing in their own way. Some municipalities are hesitant and skeptical, while others are fully embracing the new industry with open arms.

A couple weeks ago, the City Council of Springfield, Massachusetts passed a six-month moratorium on cannabis sales, citing the need for more time to draft local regulations for businesses first. “I believe the moratorium is in place to make sure that we get it right the first time,” Councilor Adam Gomez, chairman of the council’s Economic Development Committee told MassLive. “We don’t have a chance to get it right the second time. The residents of Springfield supported this.” There are also talks of a potential temporary ban in Truro, MA.

Meanwhile in the city of Attleboro, ABC6 News reports Mayor Paul Heroux is “working to make his city marijuana friendly as city councilors work to draft regulation ordinances.” In Peabody, two businesses just received approval to begin operating as medical dispensaries.

Is There a Looming Supply Bottleneck in California?

By Aaron G. Biros
No Comments

California’s regulated adult use cannabis market has been up and running for around four months now and rumors of a potential supply bottleneck on the horizon are beginning to circulate. There are a number of factors that could have an impact on the cannabis supply in the market, most of which stem from changes in the distribution channels now that the state is implementing new regulations.

Those include a slow rollout in licensing cannabis businesses, new testing requirements, the supply carryover period prior to January 1stas well as new labeling and packaging regulations. In this piece, we are going to examine some of those rumors, see if there might be some truth to them and provide some guidance for what businesses can do to prepare for this.

A Slow Start to Licensing

This one is perhaps the most obvious factor to impact the supply chain in California. Much of the delays in licensing cannabis businesses came from the issue of local control, where businesses needed to get approval from their municipality before getting a state license. In the first month of the new market, it took Los Angeles weeks longer than other counties to begin licensing dispensaries. Whereas San Diego retailers saw a massive influx of customers right away, forcing them to buy up product to meet the high demand. Smaller producers also had trouble getting licenses as quickly as some of the larger ones.

Basically it all boils down to a slow start for the new market, according to Diane Czarkowski, co-founder of Canna Advisors. “The state is requiring businesses to get their local licenses before they can get their state license and that will create a delay in operators being able to bring products to market,” says Czarkowski. She says this is pretty typical of new markets, or when a market experiences dramatic changes quickly. “It could be a brand-new market, like in Hawaii, where the operators were ready with product, but there were no labs to test the products, which caused delays.” In addition to the licensing roll out being slow to start, the temporary licenses initially awarded to businesses are set to expire soon, by the end of April.

Stricter Rules to Come

The same logic goes for the testing regulations. New testing and labeling requirements, according to the Bureau of Cannabis Control regulating the market, will be phased in throughout 2018.

CA cannabis testing chart
California’s plan for phasing in testing requirements.

The state has already phased in cannabinoids, moisture content, residual solvent, pesticide, microbial impurities and homogeneity testing to some extent. On July 1st, the state will add additional residual solvent and pesticide testing as well as foreign material testing. At the end of 2018, they plan on requiring terpenoids, mycotoxins, heavy metals and water activity testing. All of those tests cost money and all of those tests could impact suppliers’ ability to bring product to market. “Oftentimes regulations require different types of testing to be done to products without recognizing that adequately completing those tests requires different methods, equipment, and standards,” says Czarkowski. “Most labs do not have all of the necessary components, and they are very costly. Producers could wait weeks to get test results back before they know if they can sell their products.”

Back when we spoke with Josh Drayton, deputy director of the California Cannabis Industry Association, about the upcoming changes to the California market, he voiced his concerns with the coming testing rules. “A lot of testing labs are concerned they are unable to test at the state’s threshold for some of these contaminants and pesticides; the detection limits seem very low,” says Drayton. “The testing portion will take years to work out, I am sure we will remove and add different pesticides and contaminants to the list.” California’s testing industry is, however, capable of adapting to changing rules, as they’ve done in the past on more than one occasion. It should be noted that many labs in the state are on the cutting edge of testing cannabis, working with The Bureau to implement the new rules.

roybingham
Roy Bingham, CEO of BDS Analytics

Cannabis products made prior to December 31st, 2017, did not need to comply with the stricter testing rules that are coming in the next few months. This carryover period allowed dispensaries to have products on the shelves when the new market launched in the beginning of 2018. Retailers knew this rule meant they needed to stockpile product in the event of a supply bottleneck, and it appears much of that product is now sold and running out, according to Roy Bingham, founder and chief executive officer of BDS Analytics. “The true impact of licenses is starting to be felt since the carryover from December buying prior to the licensed market has been sold,” says Bingham. “Some of the major brands have consciously not applied for licenses. Some of that has to do with the flexibility the government has given them to wait.”

A fourth reason for a potential bottleneck could also come from packaging and labeling rules. “There will have to be many modifications to products to ensure they follow the new potency regulations, and many formulations will have to be modified in order to meet new regulations,” says Czarkowski. Distributor licenses, according to The Bureau, have a number of compliance documentation requirements, such as arranging for all product testing, quality assurance and packaging and label accuracy. Everything has to be packaged before it gets to a dispensary, which is a new rule California businesses need to comply with.

Pricing is the Indicator

There are a handful of reasons why prices could increase; some of them are more defined than others, the biggest factor being the tax burden passed on to consumers, where reports showed up to a 40% increase from last year. A price increase in the future could also come from The Bureau implementing testing regulations throughout 2018, as mentioned previously.

If prices were to surge enormously and very quickly, that might be an indicator that a shortage is fast approaching. A dramatic increase in price over this year could squeeze margins for smaller producers, forcing retailers to pass that burden on to consumers as well.“So yes, the rumors are true.”

According to Roy Bingham, there has been a significant increase in pricing in all categories at the retail level. “In January and February, we are seeing about 10% increases per month in average retail prices,” says Bingham. “If we look at concentrates in California during 2017, they averaged about $34 by the end of the year, whereas it was about $31 at the start of 2017. So in January, prices have increased up to $38, which is a bit above trend, but in fact we were seeing a trend upwards before January 1st as well.” Comparing that with edibles pricing, Bingham says we see a clear jump at the start of 2018. “It was basically flat in 2017, averaging $14 roughly almost straight-line across, dipped in December, then in January it jumped to $17 and then to $18 in February, a big increase and significantly more than concentrates,” says Bingham. He also says flower was hovering around $9 per gram in December 2017, but surged above $10 in February 2018.

According to Cannabis Benchmarks, the California wholesale averages surged in the summer of 2017 up to $1,631 by September, then reached their lowest point in December, with their spot index at $1,368. The Cannabis Benchmarks report underlines some important reasons for the changes in pricing, but they also attribute it to the new licensing system.

“Increasing operating expenses for businesses preparing to enter California’s licensed system in 2018 were key to propping up supply side rates in the first six months of 2017. New compliance requirements were being instituted to varying degrees by local governments, while market participants warily eyed draft regulations from state officials for guidance as to how to prepare their sites and facilities to meet under-construction regulatory mandates.”

Their report highlights some very important aspects of the supply chain. “Again, it is likely that the increased costs faced by operators up and down the supply chain exert some upward pressure on wholesale rates, preventing them from steep year-over-year declines that were observed in some of the other major Western markets,” reads the Cannabis Benchmarks report.

So How Can Businesses Prepare?

Well to start, producers should make sure their operations and product are clean and safe. Making sure your product will pass a pesticide test should be top of mind. Dispensaries should also be wise in selecting their suppliers, performing supplier quality audits or some form of verification that they meet your standards is key in a consistent supply chain.

Dr. Jon Vaught, chief executive officer of Front Range Biosciences, believes tissue culture could be a viable solution for some California producers. Using tissue culture, as a form of propagation instead of mothers and clones can be cleaner, cheaper and more efficient, thus allowing growers to keep up with demand and prevent a shortage.

Dr. Jon Vaught headshot
Dr. Jon Vaught, CEO of Front Range Biosciences

Dr. Vaught says growers could look to tissue culture as a means to “mitigate risk to their supply chain and mitigate the risk of potential loss and improve their ability to efficiently grow their plant.” Maintaining a disease-free, sterile environment is a huge advantage in the cannabis market. “The real use of tissue culture is to provide disease free, clean, certified material, that has gone through a QA program,” says Dr. Vaught. “In greenhouses, the ability to control your environment is also critical because your margin of error is high. Variations in sunlight, weather, humidity all of these things have an impact in your plants. Technology can help monitor this.”

We’ve covered the basics of tissue culture previously on CIJ, with Dr. Hope Jones chief science officer of C4 Laboratories. She echoes many of Dr. Vaught’s points, firmly believing that, having existed for decades, tissue culture is an effective propagation tool for advanced breeders or growers looking to scale up.It is a complex supply chain that requires systems thinking.

It is important to note they don’t think growers should try this at home. Work with professionals, get the necessary funding, the training and facilities required if this is a project that interest you. “There’s a pretty big barrier to entry there,” Dr. Vaught urges. “The ability to manage thousands or millions of plants in a greenhouse increases risk, whereas in the lab, you’ve got a safe, secure, sterile environment, reducing risk of disease, making things easier to manage. The producers most successful at large scale are controlling those variables to the T.”

Ultimately, one segment of the market can’t prevent a bottleneck. It is a complex supply chain that requires systems thinking. Regulators need to work with producers, manufacturers, retailers, distributors, patients, consumers and laboratories to keep an eye on the overall supply chain flow.

Diane Czarkowski says the California market should prepare for this now if they haven’t already. “We have seen supply issues in every market going through a change. Other potential bottlenecks will occur because former distribution channels will be required to change,” says Czarkowski. “So yes, the rumors are true.”

Marguerite Arnold
Soapbox

Paradox or Paragon? A Non-Techie Look at Blockchain, Cryptocurrency & Cannabis: Part II

By Marguerite Arnold
No Comments
Marguerite Arnold

Disclaimer: Marguerite Arnold has just raised the first funds for her blockchain-based company, MedPayRx in Germany (and via traditional investment funding, not an ICO). She will also be speaking about the impact of blockchain on the cannabis industry in Berlin in April at the International Cannabis Business Conference.

To read the first part of this series, click here. The Paragon class action lawsuit is likely to shake up two industries – the cannabis world, which has been following this situation at least in the industry press since the company began to raise money – and the ICO space in general. Why? Just the combination of the two topics is a guaranteed conversation starter. In addition, given the focus on whether tokens are securities or not (or whether so-called “utility tokens” are as well, depending on how they are used and sold) far beyond cannabis, this case may well begin to set precedent on the entire subject. Even more worrying for Paragon in particular right now, beyond the federal government, coordinated efforts are underway by both law firms and consumer groups to recruit aggrieved investors as suit plaintiffs. Beyond the United States and far from the Paragon case specifically, banks in Europe have begun to set guidelines on cryptocurrency and ICOs too. It is not routinely hostile everywhere (see Switzerland if not many Asian countries). But the map is now being defined.

The dilemma that Paragon is now facing is also something that has been coming for some time both for the company and others like them – and from both the cannabis investment and crypto coin directions. Digitally astute cannapreneurs take note: Do you really want your dream business used to define precedent as a defendant in a class action? Or targeted by the new SEC cyber unit whose job is to regulate ICOs (and probably “crowd sales” too?). That regulatory glare is coming everywhere. And soon. Globally.In the world of cannabis, in particular, it is also very important to be careful.

If issuing tokens, particularly if you sell them to raise money – no matter what that money will be used for – realize what you are doing. Even if you state to the world that these are not “investment” vehicles” but “utility” tokens. If you sell them, they are by definition, even if not federally litigated and defined yet in the United States, a contract for future worth, services or other benefit. An IOU in other words. As such they are also derivative securities, which is why the regulatory agencies, barely 10 years out of the last global financial meltdown, are now starting to see parallels. So much so, in fact, that SEC Chair Jay Clayton warned in January that any attorneys who are involved in ICOs might be in breach of professional obligations. Other jurisdictions are following suit.

In the world of cannabis, in particular, it is also very important to be careful. Selling (soon to be federally if not internationally regulated) tokens or securities in general for that matter for certain services or products that can be illegal in some jurisdictions is also a space that cannapreneurs are going to find challenging. See the banking problems of the entire U.S. cannabis industry. Same issue.

This is also going to get even more complicated very soon. Particularly in a world of shifting regs and when it comes to “brand creation.” Right now, for example, a crowdfund or ICO (the terms can be used interchangeably, token issue or not) for a “global cannabis lifestyle brand” promoted and sold online is highly problematic just about everywhere. Why? You cannot transport cannabis across state lines in the U.S. Americans and Israelis also still cannot export anywhere. You also cannot sell what is considered “medical” marijuana to a European regulator if it is not GMP certified. It is, according to local definition, most certainly not “medical”. You may also not distribute cannabis online in countries like Germany. And of course, cannabis itself is still federally illegal in many places, including the United States. Issuing a token or security with the intent of engaging in such practices is ill advised at this juncture. No matter what it is labelled.

Those are also situations where investors could legitimately also sue the ICO or crowd sale holder for breach of securities laws or outright fraud.

Beyond the world of banking law, users face other quagmires, depending on your situation and how you use and issue tokens. Or you certainly will in the emerging future. If you use tokens in situations where members “vote” you may also run into other problems. Like civil liberties issues. Poll taxes (where you force people to pay before access to voting or weigh the impact of their votes on financial contributions) is illegal in many jurisdictions and even more specifically certain use cases that may not always be initially obvious. How that plays out in blockchained ecosystems is a discussion of the future, but it is coming. Along with other labour and regulatory issues surrounding the use of “smart contracts.” Which are also known as “utility tokens.” See, it gets confusing. And fast.

In the cannabis space, liabilities sprout more quickly than even the fastest growing strain.As a result, the first major issue that any cannabis business considering a token generation event (or TGE) will face, no matter whether it is state or federally legit in said jurisdiction, has nothing to do with cannabis but rather rather cryptocurrencies and ICOs – and for right now federal if not international financial law – but look for that to also change as the space develops.

For the present, in most places, token issues where monetary value is assigned or implied are considered securities or even defined outright as currency. Or they will be soon. This means that if you are issuing a new coin for any purpose that you intend to sell for any purpose, including an ICO, especially one that will supposedly be used to pay for goods or services, or even to “assetize” the token to give it a market value (the value of the asset it is assigned), you are now in the federal end of the swimming pool. And federal if not international law is not for novices or sissies much less non-lawyers when it comes to crypto coin. There are great white sharks everywhere in this often-strange digital ocean. That is even before you get to cannabis.

In the cannabis space, liabilities sprout more quickly than even the fastest growing strain.

This is also easy to illustrate – even beyond the concept of an ICO. Say you are a cannabis producer in Colorado – where much of the legal cannabis industry we know today was born. You are in business, have a license and even own your grow space and the acres of real estate that it sits on. But you also want to access additional capital (including that of the international kind) and are, as an aside, overwhelmed by the demands of your cash business. You meet an energetic young blockchain geek who says she can sign you up to her service that will create your white paper, website and even hook you up to one of the several “insta-mint” crypto coin services now available for several thousand dollars (don’t forget lawyer’s fees), plus hiring a good PR firm to manage the ICO process.

Groovy.

You issue your own coins and literally mint them for the sole purpose of assigning each coin to every dried gram of your product that you produce to test the market before potentially holding an ICO. You then “sell” this bud (at wholesale prices) to a dispensary with a wallet that will accept your coin via a smart contract that only releases the funds when the right amount and quality of product is delivered to the dispensary. As a clever marketing technique, you also agree with the recreational dispensary you are working with (who happens to be in Aspen) that you both will also now offer jointly issued coins, at a higher retail price, to any tourist with a medical card or any age-appropriate recreational user who has the ID to prove it, to “pre-buy” their cannabis on the way to après ski and have it delivered, no questions asked, at the hot tub. You advertise the service with a cannabis-friendly ski package operator and travel agent, and voila – customer base is assured. If you have any celebrity friends who are willing to promote it, even better. And why not, while you are at it, do some LinkedIn outreach.

No cash needed either. ID verification happens with coin purchase.

Easy, right? So many headaches solved with one coin to rule them all. Banking issues evaporate along with a lot of work for accountants at both ends of the conversation. And the price of the coin you issue cannot be illegally pumped and dumped because the “price” is set by the state or federal market and/or supply and demand and/or another kind of asset (like a piece of real estate designed to be a startup incubator space for which people also pay entrance fees in your tokens, to enter and use). Then you can offer these “coins” for sale, at those market prices, set by the dried bud you are growing, to anyone, anywhere, to invest in too. Right?

No ICO, even. No problem. After all, you say they aren’t securities but “utility tokens.”

Wrong.

By definition, such activity is illegal in the United States if it has anything to do with the plant for the same reasons the U.S. industry remains a mostly cash-only business. There are several U.S. start-ups trying to construct “legal” payment gateways for the industry right now in the lower 48 plus 2 (see CanPay in Hawaii) and some creative efforts in Europe. However, all of those depend on the willingness of a banking institution on the other end to allow that to happen. See Uruguay if you still remain optimistic about any American efforts right now. Not to mention the newly awoken willingness of the federal DOJ to prosecute for money laundering in a post-Cole-memo world. And that includes you too, California.

But this is an issue that is not just limited to the United States.

In other places, like Canada, Australia, Israel and the Eurozone, legitimate cannabis businesses have bank accounts. And banks are absolutely involved in both the blockchain and crypto space – see Ripple. As a simplified payment gateway, the technology is imminently useful, if still forming. But banking authorities are so concerned about ICOs that they are moving, quietly, to implement policies against them even as they are still accepting cyber currency (in limited ways and via strictly controlled channels).

Given such concerns and divided loyalties, it is unlikely that authorities in Canada will sit this one out, even though (and perhaps because), to date, the most intriguing ideas about cryptocurrency and cannabis have tended to waft from this part of the world lately given what is about to happen this summer.

Most dangerous of all to the budding crypto cannapreneur is Germany – home of legal, public health insurance covering medical cannabis. Banking regulators in Frankfurt, in particular, have taken a dim view of even just regular old crowdfunding. Add a token into the mix and the Germans are even less amused. The persistent rumor in the Fintech community in Frankfurt this March is that German banking authorities are refusing to accept any funds raised during an ICO anywhere. Verboten for any purpose. Why? Even if they know who you are, and all of your investors meet their KYC requirements, they do not know the source of the cyber currency coming from those investors. No dice. And KYC in this instance does not refer to a new brand of cannabis-flavored lubricant. It is a term that means, in the most comprehensive understanding of how it must be used, not only “know your customer” but being able to verify all points of data on a chain. Including the coin issuer, purchase conditions, currency used to purchase the same and “chain of title” downstream. If you are confused by this already, you should not be engaged in an ICO right now.Not all of these models or even the ICOs that use them are scams.

Add cannabis to this recipe, and every bank in Germany, even the one at the moment who is still more or less openly participating in ICOs, if not the rest of the European financial community, will probably walk. Even if you reach your “hard cap” (the maximum amount you hope to raise) that might be in the tens if not hundreds of millions of euros. In that case, it will probably be even harder to find a bank to accept your business. Worse, you may never raise the amount you hope for. At that point, you cannot go back to traditional venture capitalists – or anyone else – for more money. You are done. You must start over from scratch. If there was an asset of any kind involved (including a license to do business) legally, everyone who holds a coin owns a piece of it. See securities law. This is precisely why you can never raise money again against that asset or with the corporate entity that owns it. Or at least not without a lot of legal fees or begging your peeved investors for more money. Legally, at that point, they could require you to sell all assets associated with the corporate entity holding the ICO. And they probably would. For investors that is the best-case scenario. ICOs for concepts with no assets or strategic partnerships in place at the time of the “token sale,” create many lose-all scenarios for investors.

There are many pitfalls to this world – and not just from the cannabis side.Issuing a “token” that someone has to pay for that acts like cash (even if to buy goods and services in the future from other members of the ecosystem and social community that crypto coins create) that also is vulnerable to market pricing, is another quagmire. In fact, it might be, beyond any techno or financial queasiness about blockchain, the biggest reason that this industry should look, and with considerable caution, at all tokenized and ICO models that also premise their worth on the idea that such coins will inevitably increase in worth over time. There is also anti-cartel, monopoly and market discrimination to consider.

Not all of these models or even the ICOs that use them are scams. There are and will be valuable alt currencies and tokens in the future (even without a cash value assigned). All of the top start-ups in the current ICO space, in fact, are finding unique ways to create a real alternative currency with values attached that are indisputable. And not all of them will succeed.

However, that is not true of the cannabis business at this juncture. The plant, much like cryptocurrency and beyond that, blockchain itself, has not reached mainstream status yet – starting with market economics and regulation that is already international. A pot-based coin, no matter where it is issued and by whom (including a federal government), would run into multiple issues with valuation just because the price of cannabis itself right now is so volatile, not to mention unevenly priced thanks to jurisdictional restrictions and barriers. For that reason, there is no way to issue a “cannabis coin” with global relevance, much less global value.

And that, of course, is beyond the issue of subsequently selling those coins on exchanges that have been repeatedly hacked, fail to give customers access to their accounts, or are, in the case of China, banned outright (which also deemed ICOs illegal last September).

There are many pitfalls to this world – and not just from the cannabis side. Part III of this series will look at some of the biggest opportunities when cannabis integrates with the DLT (distributed ledger technology).