Tag Archives: Supply Chain

UN Votes to Delay Rescheduling of Cannabis for Second Time in Two Years

By Marguerite Arnold
1 Comment

For the second time in two years, the United Nations Commission on Narcotic Drugs (CND) has delayed a critical vote on the reclassification of cannabis. The CND met in Vienna, Austria from March 2-6. The vote is now expected to happen in December 2020. The discussion about reclassification of the plant, however, has been going on for a little longer than that.

WHO Recommendations

There are several recommendations that are on the table (even if far from perfect). See the full text of the recommendation here.

  1. Delta 9 Tetrahydrocannabinol should be added to Schedule I of the 1961 Single Convention on Narcotic Drugs.
  2. Delta 9 Tetrahydrocannabinol should be removed from the 1971 Convention on Psychotropic Substances.
  3. The six isomers of tetrahydrocannabinol chemically similar to Delta 9 THC should be classified similarly to Delta 9.
  4. Extracts and tinctures made from cannabis should be removed from Schedule I of the 1961 Single Convention but that they should also be classified per the act. In other words, extracts with THC should be considered narcotics with medical purpose and all dealt with per a single rule.
  5. Cannabidiol products containing no more than 0.2% of Delta 9 THC should not be under international control.
  6. Preparations with THC that are made as pharmaceutical products should be reclassified as Schedule III drugs per the 1961 Convention. (Note – Dronabinol is already classified this way in the United States and has been since 2010).

What Does This Really Mean?

Given the impending lockdown of whole industries right now, but a wartime footing for certain pharmaceutical drugs and medical equipment makers, on one hand, this seems like the obvious and safest thing to do. The world needs a vaccine and direct treatments and to focus research, manpower and money in that direction.

Further, and this should hopefully galvanize the industry internationally, what this also does is keep the consumption of the plant itself basically illegal while putting the focus on professionally prepared pharmaceutical drugs.

This is short-sighted. Cannabis is unlike other medications. Further, the high cost of pharmaceutical drugs makes wider treatment policy options extremely expensive to implement.

Further, this approach continues to define cannabis – specifically Delta 9 and THC – as a narcotic.

While it is undeniably true that for recreational users, there are narcotic effects, most long term patients do not react to the drug this way – particularly if they suffer from chronic pain due to neurological issues (including movement disorders), inflammatory diseases like rheumatoid arthritis and those that destroy the body’s immune response, like HIV.

There is a need for regulation, normalization of supply chains globally and of course, medical trials.The definitions of this plant, in other words, need to change. And not just for the benefit of pharmaceutical companies, but for patients as well.

Further, in a world that is quickly headed for a global recession unseen since the Great Depression, highly priced medications are not the best Rx.

As the German government responded to President Donald Trump recently, as he tried to offer a German company a billion dollars to only develop a vaccine for use on Americans, there are clearly limits to capitalism.

The Good News

It is highly unlikely by December, nine months into a global public health crisis which is widely expected to last for at least the next two years, that the UN will delay the vote again come December. There is a need for regulation, normalization of supply chains globally and of course, medical trials.

Beyond that, recreational reform also looms at a federal level in many countries and regions.

However, given the discussions so far, it is also clear that beyond the redefinition of cannabis, there will be greater legal opportunities to expand an industry too long stigmatized by old fashioned understandings and definitions of what cannabinoids are.

Comparable to Organic: How This California Company Aims to Certify Cannabis

By Aaron G. Biros
No Comments

Cannabis that contains more than 0.3% THC is not eligible for USDA organic certification, due to the crop’s Schedule I status. While some hemp farmers are currently on the path to obtain a USDA organic certification, the rest of the cannabis industry is left without that ability.

Growers, producers, manufacturers and dispensaries that utilize the same practices as the national organic program should be able to use that to their advantage in their marketing. Ian Rice, CEO of Envirocann, wants to help cannabis companies tap into that potential with what he likes to call, “comparable to organic.”

Ian Rice, CEO of Envirocann & co-founder of SC Labs

Rice co-founded SC Laboratories in 2010, one of the first cannabis testing labs in the world, and helped develop the cannabis industry’s first testing standards. In 2016, Rice and his partners at SC Labs launched Envirocann, a third-party certification organization, focused on the quality assurance and quality control of cannabis products. Through on-site inspections and lab testing, Envirocann verifies and subsequently certifies that best practices are used to grow and process cannabis, while confirming environmental sustainability and regulatory compliance.

“Our backyard in Santa Cruz and the central coast is the birthplace of the organic movement,” says Rice. California Certified Organic Farms (CCOF), founded in Santa Cruz more than 40 years ago, was one of the first organizations in the early 1990s that helped write the national organic program.

“What we came to realize in the lab testing space and as the cannabis market grew, was that a lot of cannabis companies were making the organic claims on their products,” says Rice. “At the time, only one or two organizations in the cannabis space were making an attempt to qualify best practices or create an organic-type feel of confidence among consumers.” What Rice saw in their lab was not cannabis that could be considered organic: “We saw products being labeled as organic, or with certain claims of best practices, that were regularly failing tests and testing positive for banned chemicals. That really didn’t sit well with us.”

Coastal Sun Farms, Enviroganic-certified

At the time, there was no real pathway to certify cannabis products and qualify best practices. “We met with a few people at the CCOF that were very encouraging for us to adopt the national organic program’s standards for cannabis. We followed their lead in how to adopt the standards and apply a certification, building a vehicle intended to certify cannabis producers.”

Because of their background in lab testing they added the requirement for every crop that gets certified to undergo a site inspection, sampling, as well as a pesticide residue test to confirm no pesticides were used at all during the production cycle. One of their clients is Coastal Sun Farms, a greenhouse and outdoor cannabis producer. “They grow incredible products at a high-level, commercial scale at the Enviroganic standard,” says Rice. “They have been able to prove that organic cannabis is economically viable.”

The Envirocann certification goes a bit beyond the USDA’s organic program in helping their clients with downstream supply chain risk management tools (SCRM). “Because of the rigorous testing of products to get certified and go to market, we are getting way ahead of supply chain or production issues,” says Rice. “That includes greater oversight and transparency, not just for marketing the final product.”

A good example of using SCRM to a client’s advantage is in the extraction business. A common scenario recently in the cannabis market involves flower or trim passing the pesticide tests at the lab. But when that flower makes it down the supply chain to a manufacturer, the extraction process concentrates chemical levels along with cannabinoid levels that might have previously been acceptable for flower. “I’ve witnessed millions and millions of dollars evaporate because flower passed, but the concentrated final product did not,” says Rice. “We’ve introduced a tool to get ahead of that decision-making process, looking beyond just a pass/fail. With our partner labs, we look at the chromatograms in greater detail beyond regulatory requirements, which gives us information on trace levels of chemicals we may be looking for. It’s a really rigorous audit on these sites and it’s all for the benefit of our clients.”

Envirocann has also recently added a processing certification for the manufacturing sector and a retail certification for dispensaries. That retail certification is intended to provide consumers with transparency, truth in labeling and legitimate education. The retail certification includes an assessment and audit of their management plan, which goes into details like procurement and budtender education, as well as basic considerations like energy usage and waste management.

Fog City Farms, Envirocann-certified

While Envirocann has essentially adopted the USDA’s organic program’s set of standards for what qualifies organic producers, which they call “Enviroganic,” they also certify more conventional producers with their “Envirocann” certification. “While these producers might not be considered organic farmers, they use conventional methods of production that are responsible and deserve recognition,” says Rice. “A great example for that tier would be Fog City Farms: They are growing indoor with LED lighting and have multiple levels in their indoor environment to optimize efficiency and minimize their impact with waste and energy usage, including overall considerations for sustainability in their business.”

Looking to the future, Ian Rice is using the term “comparable to organic” very intentionally, preparing for California’s roll out of their own organic cannabis program. The California Department of Food and Agriculture (CDFA) is launching the “OCal Comparable-to-Organic Cannabis Program.” Envirocann is obviously using the same language as the CDFA. That’s because Envirocann aims to be one of the verifying agents under the CDFA’s new program. That program will begin on January 1, 2021.

The Impact of Brexit on the Global Cannabis Industry

By Marguerite Arnold
No Comments

HMS Great Britain has now set forth from its European home port for another intriguing and very British escapade on the high seas.

So far the jury is out.

It could be the beginning of the next British Golden Age, Spanish Armada and all that. Or could it could end up (more likely) somewhere up the Khyber Pass (a sordid misadventure of British Imperialism that did not go well in the 19th century with global implications still reverberating to this day). For Netflix fans of The Crown, think “Suez Crisis” as a more recent and apt analogy. Starting with as much as a 6.7% reduction in domestic GDP already on the horizon.

Snarky historical analogies and nostalgia aside, how will Brexit influence and shape a global cannabis industry, starting at home?

The UK Is Not Actually in Regulatory Free Fall

The first thing to realize is that most of the puffery around Brexit was that with the exception of labor conditions, there is little free choice in the world of trade anymore. The players who get export and import licenses, for anything, have to conform to basic equivalency rules, no matter what they are called.

This applies to cannabis in a big way. No matter how the UK market develops domestically in other words, and that is a separate discussion.

Currently, shamefully, the domestic medical guidelines for prescription of cannabis exclude chronic pain patients and a few other obvious groups. The NHS medical market in other words, is a monopoly, set up by the current and previous governments, mainly serving GW Pharmaceutical patients who qualify for Sativex and Epidiolex. Not to mention company shareholders.

Everyone else, including those for whom these drugs do not work well, or work less well than other alternatives, are left in an international trade negotiation in their living rooms as they and or their children suffer.

The import barriers for cannabis – both from Europe and from Canada are absolutely in the room and in a very personal way for the British right now.

How they actually define cannabis, will also clarify. This will be driven now by the UK’s biggest import partners – namely Europe, the United States and Canada (although South Africa and Australia of course, will always be in the picture).

Which regulatory scheme the UK adapts, including for cannabis and of both the THC and CBD variety (not to mention other cannabinoids), in other words, will at minimum have to be broadly equivalent with all of the above. Not the other way around. No matter how much the Food Standards Agency (FSA) wants to fuss and fiddle with “Novel Food.” That alone is a canard.

Cannabis is a plant. It is time to start acting like that. And it is no more “novel” than tomatoes in many, easy-to-understand environments, including commercial ones. Not to mention will increasingly be regulated like commercial food crops – even if those crops are then also bound for dual purpose medical use.

The regulators will eventually get there – but not without a lot of tortuous twists and turns.

A “New” Market? Not So Much…

There is a lot of consultant palaver and baloney in the room right now. There is no more a new market in the UK as there was in Germany (or Canada or Colorado). Local producers are already organizing, and on the hemp front. The big ones are hip to regulations and are getting certified to enter it. Everyone else is being left on the dangerous sharp end of police raids, even with prior local approvals.

GW logoThat said, foreign producers are of course looking at the UK right now, and in a big way. The lock GW Pharmaceuticals has on the domestic market will not hold long. European producers are absolutely in the room (starting with Tilray in Portugal and Alcaliber in Spain). Not to mention what is going on in other places right now, even if of less well-known corporate branding.

Every big Canadian company is already in the room in the UK, and many Americans are now beginning to show up in the market.

However, for the most part, such ventures are doomed outside of conference sponsorships until the regulatory questions are answered if not met.

And that includes federal certifications that are easy to find – there is no one single authority that handles cannabis internationally. And there never will be. Supply chains are already global.

A Perfect Export Market

One of the biggest, so far widely discussed questions is who in Europe will start exporting to the UK (forget Holland for the moment). Not to mention producers in Spain, Greece, Poland if not Macedonia. That conversation is also on the table now. For the first time, so is Germany, and on the medical side.

Pharmaceutical producers in particular who meet international pharma standards may be the best hope yet – although right now policy makers are still looking at cars rather than cannabis to help keep Germany’s trade export quota where it feels “comfortable” domestically.

Image credit: Flickr

That too will change. And fairly quickly. See Greece, if not South Africa.

The political roil of branding and politics afoot in Germany right now makes this new kind of export market idea as a part of economic development, an inevitability.

Not to mention, at least for the present, a reverse trade in regulated British CBD products – if producers are smart about regulations – throughout the continent right now.

Of all countries, outside Switzerland, the UK has the ability to develop a broad and intriguing market in the EU – but only if they are compliant with regulations in Europe.

And this is where the policy makers in Parliament and 10 Downing Street have already misjudged if not broadly misled, not in a regulatory environment of their own, but in fact in a diplomatic “room” where the rules are already set via international standards and certifications, not to mention treaties.

Strengthen Supply Chain Management with an Integrated ERP & CMS

By Daniel Erickson
1 Comment

Success in the cannabis industry is driven by a company’s ability to adapt to an ever-changing market and meet the demands of the evolving consumer. Selecting the right business management solution to handle the complexities of the growing cycle as well as daily operations and compliance requirements necessitates diligent research. Ensuring that the selected technology solution has a centralized database in a secure platform designed to reinforce quality throughout company operations is essential in today’s competitive industry. An ERP solution with integrated CMS capabilities helps businesses strengthen supply chain management by seamlessly incorporating cannabis cultivation with day-to-day company operations to efficiently deliver seed to sale capabilities and meet marketplace demands.

What are ERP & CMS?

Enterprise resource planning (ERP) is a business system in which all data is centralized – including finances, human resources, quality, manufacturing, inventory, sales and reporting. A cultivation management system (CMS) is an extension of an ERP solution to manage cannabis greenhouse operations, including growing, inventory and labor needs. A CMS maintains a detailed level of tracking to account for continuous cannabis growth periods that require extensive monitoring and incur a multitude of expenses. In an integrated solution, both the ERP and CMS data are managed under the same secure database to provide a forward and backward audit trail of all business processes. This visibility encompasses the entire supply chain from the management of supplier relationships to distribution – including growing, cultivating, extracting, manufacturing and shipping.

How do ERP & CMS strengthen supply chain processes?

Tracks individual plants and growth stages – By tracking plant inventories at the individual plant level in real-time with a unique plant identifier, greenhouse operations are optimized – monitoring the entire lifecycle of the plant throughout the germination, seedling, vegetative and flowering stages. Audit trails maintain regulatory compliance, including information such as terpene profiles and THC and CBD potency. Monitoring genealogy, mother and cloning, crossbreeding, plant genetics and clone propagation are key to success in this industry. Strain tracking is equally important, including identifying which strains are performing best, producing the most yield and how they are received by the marketplace. Tracking of the entire supply chain includes the recording of plant health, harvesting techniques, production, growth, costs, lab testing and batch yields – without any gaps in information.

PlantTag
A plant tagged with a barcode and date for tracking

Optimizes growing conditions to increase yields – By automatically documenting and analyzing data, insights into plant and greenhouse activities create streamlined processes for an optimal cannabis cultivation environment. This includes the monitoring of all growing activities such as space, climate, light cycles, moisture content, nutrient applications, fertilizer and other resources, which all have an effect on plant growth and yields. Most importantly, labor costs are monitored, as it is the highest expense incurred by growers. In an industry for which many companies have limited budgets, enabling efficient greenhouse planning, automation and workflows reduces overhead costs.

Integrates with regulatory compliance systems – Compliance is a mandatory part of the cannabis business, and many companies haven’t expended the effort to ensure their processes are meeting regulations. This has placed their licensing and business at risk. An integration that automates the transfer of required reporting information from the ERP to state government approved software such as METRC, Biotrack THC and Leaf Data Systems to ensure regulatory compliance is imperative. This streamlined process assures that reporting is accurate, timely and meets changing requirements in this complex industry.

Facilitates safety and quality control – With an ERP solution tracking all aspects of growing, manufacturing, packaging, distribution and sales, safety and quality are effectively secured throughout the supply chain. Despite the lack of federal legality and regulatory guidelines, proactive cannabis producers can utilize an ERP’s automated processes and best practices to ensure safe and consistent products. By standardizing and documenting food safety procedures, manufacturers mitigate the risk of cannabis-specific concerns (such as aflatoxins, plant pesticide residue, pest contamination and inconsistent levels of THC/CBD potency) as well as dangers common to traditional food manufacturers (such as improper employee procedures and training) for those in the edibles marketplace. Food safety initiatives and quality control measures documented within the ERP strengthen the entire supply chain.

Maintains recipes and formulations – In manufacturing, to achieve product consistency in regards to taste, texture, appearance, potency and expected results, complex recipe and formula management is a necessity – including monitoring of THC and CBD percentages. The calculation of specific nutritional values to provide accurate labeling and product packaging provides necessary information for consumers. Cannabis businesses have to evolve with the consumer buying habits and marketplace saturation by getting creative with their product offerings. With integrated R&D functionality, the expansion of new and innovative edibles, beverages and forms of delivery, as well as new extractions, tinctures, concentrates and other derivatives, helps to meet consumer demands.

Handles inventory efficiently – Established inventory control measures such as tracking stock levels, expiration dates and product loss are effectively managed in an ERP solution across multiple warehouses and locations. Cannabis manufacturers are able to maintain raw material and product levels, reduce waste, facilitate rotation methods and avoid overproduction to control costs. With the use of plant tag IDs and serial and lot numbers with forward and backward traceability, barcode scanning automatically links product information to batch tickets, shipping documents and labels – providing the ability to locate goods quickly in the supply chain if necessary in the event of contamination or recall. The real-time and integrated information available helps mitigate the risk of unsafe products entering the marketplace.

Food processing and sanitation
By standardizing and documenting food safety procedures, manufacturers mitigate the risk of cannabis-specific concerns

Utilizes user-based software permissions – Access to data and ability to execute transactions throughout the growing stages, production and distribution are restricted to designated employees with proper authorization – ensuring security and accountability throughout the inventory chain.

Manages supplier approvals – Assurance of safety is enhanced with the maintenance of detailed supplier information lists with test results to meet in-house quality and product standards. Quality control testing ensures that critical control points are monitored and only approved materials and finished products are released – keeping undeclared substances, harmful chemicals and impure ingredients from infiltrating the supply chain. When standards are not met, the system alerts stakeholders and alternate vendors can be sought.

Delivers recall preparedness – As part of an edible company’s food safety plan, recall plans that include the practice of performing mock recalls ensures that cannabis businesses are implementing food safety procedures within their facilities. With seed to sale traceability in an ERP solution, mitigating the risk of inconsistent, unsafe or contaminated products is readily maintained. Integrated data from the CMS solution provides greater insight into contamination issues in the growth stages.

An ERP solution developed for the cannabis industry with supporting CMS functionality embodies the inventory and quality-driven system that growers, processors, manufacturers and distributors seek to strengthen supply chain management. Offering a centralized, secure database, seed to sale traceability, integration to compliance systems, in-application quality and inventory control, formula and recipe management functionality and the ability to conduct mock recalls, these robust business management solutions meet the needs of a demanding industry. With a variety of additional features designed to enhance processes in all aspects of your cannabis operation the solution provides a framework to deliver truly supportive supply chain management capabilities.

aurora logo

Aurora Medical Cannabis Flower Unavailable In Germany Pending Review By Authorities

By Marguerite Arnold
No Comments
aurora logo

For now, at least, Aurora is AWOL in German pharmacies.

Sources who did not wish to be identified from apothekes here confirmed to Cannabis Industry Journal that Aurora product was currently unavailable throughout the country. The same sources also confirmed that Aurora contacted them about the suspension.

The fallout over less than quality cannabis entering at least the Danish and German markets, as reported by CIJ repeatedly this year, continues to make waves, globally. This newest development seems to be a step up in seed to sale inspections of late as a response from governments who have to deal with normalizing cannabis laws and different standards no matter what else is going on.

That this development also comes on the heels of not only the scandals at CannTrust and Hexo (both Canadians with aspirations in the EU), but many reports on the ground from distributors and pharmacies in Germany of mouldy if not pesticide tainted cannabis ever since 2017, is also significant.

Substandard product is clearly coming from somewhere.

As CIJ also reported, this issue also appears to have flared between Holland and Poland this year right before Italy also cancelled one of Aurora’s cultivation licenses lately on the grounds of GMP compliance this fall.aurora logo

High Quality Supply Chain Issues Are In The Room

This newest development with Aurora is the first sign that German authorities at least, appear to be taking notice.

As Marijuana Business Daily is reporting, the review is of a “proprietary step” in the production process related to a method used to ensure the shelf life of flower cannabis. Aurora has stated in return, that their “products are sourced from an EU GMP certified facility and are safe to consume.”

Sourced or not from a certified facility, the devil, when it comes to EU GMP, is in the details at the source. Not to mention the product on the ground as it ages. And those particularities, on a global level, are still being worked out in a process known broadly as “harmonization.”

When it comes to the cannabis industry in particular, this is also very much in the room thanks to two large treaties with North America of late. Namely CETA, the broad trade agreement between Canada and the EU, which, among other things replaces the old MRA pharmaceutical agreement that existed previously. And of course, the EU-US MRA agreement, which came into full force this July.

As the discussion between Poland and Holland this year demonstrates clearly, one country’s definition of GMP even within the EU can differ.

Product grown and processed in a foreign third-party country, no matter the designation of the actual facility itself in this environment, is bound to get a review. Especially cannabis from Canada.

Put in context of the market itself, this is even more significant, especially given Aurora’s presence in the German market not only as provider as the holder of most of the licenses (5) awarded to three cultivators – a title won with lots of blood on the ground. Not to mention many casualties – including of course the first tender bid itself.

Will This Impact The German Cultivation Bid?

In the current environment, with Aurora announcing retreats on construction in progress just about everywhere, both in Europe and at home, this could easily also be a warning shot across the bow by German authorities.

german flag
Photo: Ian McWilliams, Flickr

While the hijinks of the cannabis industry seem to get a wink and a nod just about everywhere else cannabis reform has come, that is not true on the ground here. Further, Germany very much is a land of laws and regulations. And the average German, no matter how much they kvetch about the same, has by now more or less accepted that medical cannabis that can help very sick people get better is ok. The issue of who should pay for it is another question. Regardless, none of the cannabis in the market here is what could be termed as “cheap.” The idea that such medicine might be of less than required medical quality is one that is, as a result, indefensible.

While nobody (so far) has come forward to the press from the patient side with proof that can be validated, there have been distributors and pharmacies discussing issues surrounding the quality of product for some time now too. None want to be quoted for this story, but the noted focus on seed to sale quality issues by all of the big producers (see Aphria of late as just one example), are clearly a response to the same.

It is also unlikely that Aurora will lose its cultivation licenses in Germany – although again, this review by the German government also may be a second look into the company’s finances and ability to build a high-class facility in the country capable of producing the five lots now required.

Their inability to service this contract seems unlikely on financial grounds, no matter how retrenched Aurora has been of late.

Given the current environment, however, the events of the last six months, and the reality on the ground, this latest inspection seems to be an almost inevitable warning shot across the bow to not only Aurora but all cannabis producers at a time when the first German cultivated medical cannabis (see ICC) is now in pharmacies.

Not to mention high quality product from other parts of the world. If the Canadians can’t cut it, the message seems to be, there are others who are now stepping into the ring who can.

The CalCannabis Appellations Project Is About to Spark a New Chapter in Place-Based Branding

By Amy Steinfeld, Jack Ucciferri
1 Comment

Connoisseurs know that pairing a fine cut of steak with a Napa Valley cabernet sauvignon is a sure winner. But how many are aware that pairing strawberry cheesecake with a certified Santa Cruz Blue Dream cannabis strain creates an equally delicate palatal synergy? Thanks to the California Department of Food and Agriculture’s CalCannabis Appellations Project (“CAP”), premium cannabis regions will soon have the potential to capitalize on such newfound awareness among discerning consumers.

For decades, cannabis connoisseurs have been willing to pay a premium for flower said to have been grown in certain regions or with certain techniques, but because of cannabis’ legal status, supply chains have been opaque. As a result, cultivators of distinct cannabis strains struggled to capture the full market potential of their products. That has begun to shift with implementation of California’s Cannabis Track-and-Trace System. The costs associated with implementation of the METRC1 system have been bemoaned by many in the industry, but there is also tremendous potential value in having the most transparent supply chain in the world. The CalCannabis Appellations Project is the vehicle through which brands will be able to harness that value.

The underlying premise behind the CalCannabis Appellations Project is that the distinctive qualities of a cannabis product are often attributable to where and how the plant is grown. Through this project, CalCannabis is developing a statewide appellations system2 that will allow qualifying licensed cultivators to effectively communicate information about their cannabis crops (i.e., the standards, practices and/or varietals used) through labels, advertisements and other marketing techniques. It will also prevent disingenuous cannabis cultivators from making inaccurate claims about where and how a product is grown, which protects the integrity and value of the appellation.

What is an appellation?

In general terms, an appellation is an identifying name, title or label that can be legally defined and protected. Appellations are most commonly used in the wine industry to geographically identify the origin of grapes in a particular bottle. This place-based identification system comes from an understanding that certain regions have unique environmental and growing characteristics, which result in a product that cannot be produced from other regions even when the same varietals are used. Famous wine appellations or American Viticultural Areas (AVAs) in California include the Napa Valley and Santa Ynez AVAs, and sub-AVAs such as the Russian River Valley AVA, located within the larger Sonoma County AVA.

Recognizing there are also growing regions that produce uniquely distinctive cannabis, CalCannabis is developing a process for:

  1. Establishing an appellation (i.e., identifying regions that produce distinctive cannabis and defining standards, practices and/or varietals that must be used in those regions to qualify for an appellation); and
  2. Qualifying to use a particular appellation once they are established (i.e., determining the cannabis cultivators that can legally label or market themselves as belonging to a particular appellation).

While the state has not released program details, it’s likely that cultivators will have to demonstrate their outdoor-grown cannabis is distinctly unique.3 CalCannabis has until Jan. 21, 2021,4 to establish these processes, but a draft is expected to be released by early January 2020.5 This is an opportunity for cultivators to organize and participate in the process to define and create unique local appellations.

What are the benefits of an appellations system?

Napa wine country
Image: James Faulkner, Flickr

Appellations benefit both cannabis cultivators and consumers. It allows small farmers to capture the value that consumers place on unique and local cannabis products. Allowing for product differentiation through an appellations system will prevent cannabis from becoming a commodity—a situation that could result in indistinguishable products and a single market price for cannabis regardless of how or where it is grown. Thus, an appellations system protects not only local economies and farming communities, but also consumers that care about the origin and growing practices of their cannabis.

A criticism of appellations, particularly in the wine industry, is that they can disincentivize innovation and industry growth when strict growing practices and standards are required to be a part of an appellation. This will be an important consideration as CalCannabis establishes its appellations system.

County of Origin

In addition to setting up an appellations system, the CalCannabis Appellations Project will expand upon current county of origin regulations. Unlike an appellation designation, the county of origin designation is designed to be much more inclusive—it can currently be used on any cannabis product as long as 100% of the cannabis is grown within the designated county.6 Whereas an appellation will communicate information about the quality of a cannabis product and how it was produced, a county of origin designation is more like a “Made In” label. For example, a county of origin designation can be applied to indoor cannabis whereas an appellation will likely only include sun-grown cannabis.

There is also a desire to allow city of origin designations in addition to county of origin designations, which would enable products grown wholly within the political boundaries of a city to further differentiate themselves.7 As the legal cannabis landscape changes nationwide, it may also be important to have a statewide appellation allowing products to be marketed as “Grown in California.”

What should cannabis cultivation regions be doing now?

After CalCannabis releases a draft process for establishing an appellation, the next steps will be clarified. However, not everyone is waiting. For instance, growers in Mendocino County have already started to organize.8 The Mendocino Appellations Project divided the county into 11 unique subregions based on regional growing conditions and practices that could potentially be turned into appellations in the future. The goal of the appellations outlined by the Mendocino Appellations Project is to protect cannabis products coming out of Mendocino County and preserve the region’s growing heritage.

A group in Sonoma County is also discussing the establishment of appellations with the hope that it will help differentiate their cannabis and draw attention to the unique microclimate and soil structure in parts of Sonoma County.9 The groups involved in these discussions also believe it will allow cultivators to develop strict growing standards and to protect certain strains, while creating new jobs and encouraging agritourism. Appellations will become increasingly important as sophisticated consumers begin to select quality cannabis that aligns with their preferences.

References

  1. METRC is the third-party-owned software contracted by California authorities to implement the commercial cannabis track-and-trace system “from seed-to-sale.”
  2. Passage of Senate Bill 185 calls for the use of the term “appellations of origin” instead of “appellations.”
  3. Based on comments made during the October 23 Cannabis Advisory Committee Meeting.
  4. Business and Professions Code Section 26063.
  5. Based on comments made during the October 23 Cannabis Advisory Committee Meeting.
  6. Business and Professions Code Section 26063(a).
  7. Based on comments made during the October 23 Cannabis Advisory Committee Meeting.
  8. https://swamiselect.com/mendocino-appellation-project/
  9. https://www.sonomacountygazette.com/sonoma-county-news/cannabis-appellations-the-small-cannabis-farmers-elyon-cannabis.

Rapid Pathogen Detection for the 21st Century: A Look at PathogenDx

By Aaron G. Biros
No Comments

In 1887, Julius Petri invented a couple of glass dishes, designed to grow bacteria in a reproducible, consistent environment. The Petri dish, as it came to be known, birthed the scientific practice of agar cultures, allowing scientists to study bacteria and viruses. The field of microbiology was able to flourish with this handy new tool. The Petri dish, along with advancements in our understanding of microbiology, later developed into the modern field of microbial testing, allowing scientists to understand and measure microbial colonies to detect harmful pathogens in our food and water, like E. coli and Salmonella, for example.

The global food supply chain moves much faster today than it did in the late 19th century. According to Milan Patel, CEO of PathogenDx, this calls for something a little quicker. “Traditional microbial testing is tedious and lengthy,” says Patel. “We need 21st century pathogen detection solutions.”

Milan Patel first joined the parent company of PathogenDx back in 2012, when they were more focused on clinical diagnostics. “The company was predominantly built on grant funding [a $12 million grant from the National Institute of Health] and focused on a niche market that was very specialized and small in terms of market size and opportunity,” says Patel. “I realized that the technology had a much greater opportunity in a larger market.”

Milan Patel, CEO of PathogenDx
Photo: Michael Chansley

He thought that other markets could benefit from that technology greatly, so the parent company licensed the technology and that is how PathogenDx was formed. Him and his team wanted to bring the product to market without having to obtain FDA regulatory approval, so they looked to the cannabis market. “What we realized was we were solving a ‘massive’ bottleneck issue where the microbial test was the ‘longest test’ out of all the tests required in that industry, taking 3-6 days,” says Patel. “We ultimately realized that this challenge was endemic in every market – food, agriculture, water, etc. – and that the world was using a 140-year-old solution in the form of petri dish testing for microbial organisms to address challenges of industries and markets demanding faster turnaround of results, better accuracy, and lower cost- and that is the technology PathogenDx has invented and developed.”

While originally a spinoff technology designed for clinical diagnostics, they deployed the technology in cannabis testing labs early on. The purpose was to simplify the process of testing in an easy approach, with an ultra-low cost and higher throughput. Their technology delivers microbial results in less than 6 hours compared to 24-36 hours for next best option.

The PathogenDx Microarray

Out of all the tests performed in a licensed cannabis testing laboratory, microbial tests are the longest, sometimes taking up to a few days. “Other tests in the laboratory can usually be done in 2-4 hours, so growers would never get their microbial testing results on time,” says Patel. “We developed this technology that gets results in 6 hours. The FDA has never seen something like this. It is a very disruptive technology.”

When it comes to microbial contamination, timing is everything. “By the time Petri dish results are in, the supply chain is already in motion and products are moving downstream to distributors and retailers,” Patel says. “With a 6-hour turnaround time, we can identify where exactly in the supply chain contaminant is occurring and spreading.”

The technology is easy to use for a lab technician, which allows for a standard process on one platform that is accurate, consistent and reproduceable. The technology can deliver results with essentially just 12 steps:

  1. Take 1 gram of cannabis flower or non-flower sample. Or take environmental swab
  2. Drop sample in solution. Swab should already be in solution
  3. Vortex
  4. Transfer 1ml of solution into 1.5ml tube

    A look at how the sample is added to the microarray
  5. Conduct two 3-minute centrifugation steps to separate leaf material, free-floating DNA and create a small pellet with live cells
  6. Conduct cell lysis by adding digestion buffer to sample on heat blocks for 1 hour
  7. Conduct Loci enhancement PCR of sample for 1 hour
  8. Conduct Labelling PCR which essentially attaches a fluorescent tag on the analyte DNA for 1 hour
  9. Pipette into the Multiplex microarray well where hybridization of sample to probes for 30 minutes
  10. Conduct wash cycle for 15 minutes
  11. Dry and image the slide in imager
  12. The imager will create a TIFF file where software will analyze and deliver results and a report

Their DetectX product can test for a number of pathogens in parallel in the same sample at the same time down to 1 colony forming unit (CFU) per gram. For bacteria, the bacterial kit can detect E. coli, E. coli/Shigella spp., Salmonella enterica, Listeria and Staph aureus, Stec 1 and Stec 2 E.coli. For yeast and mold, the fungal kit can test for Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger and Aspergillus terreus.

Their QuantX is the world’s first and only multiplex quantification microarray product that can quantify the microbial contamination load for key organisms such as total aerobic bacteria, total yeast & mold, bile tolerant gram negative, total coliform and total Enterobacteriaceae over a dynamic range from 100 CFU/mL up to 1,000,000 CFU/mL.

Not all of the PathogenDx technology is designed for just microbial testing of cannabis or food products. Their EnviroX technology is designed to help growers, processors or producers across any industry identify areas of microbial contamination, being used as a tool for quality assurance and hazard analysis. They conducted industry-wide surveys of the pathogens that are creating problems for cultivators and came up with a list of more than 50 bacterial and fungal pathogens that the EnviroX assay can test for to help growers identify contamination hotspots in their facilities.

Using the EnviroX assay, growers can swab surfaces like vents, fans, racks, workbenches and other potential areas of contamination where plants come in contact. This helps growers identify potential areas of contamination and remediate those locations. Patel says the tool could help growers employ more efficient standard operating procedures with sanitation and sterilization, reducing the facility’s incidence of pathogens winding up on crops, as well as reduction in use of pesticides and fungicides on the product.

Deploying this technology in the cannabis industry allowed Milan Patel and the PathogenDx team to bring something new to the world of microbial testing. Their products are now in more than 90 laboratories throughout the country. The success of this technology provides another shining example of how the cannabis market produces innovative and disruptive ideas that have a major impact on the world, far beyond cannabis itself.

A Year In Review: Canadian Recreational Reform Year 1

By Marguerite Arnold
No Comments

There is certainly, in retrospect, much to be proud about in Canada – home of one of the most disruptive international cannabis industries in the world. And certainly an early mover.

That starts with having the national mojo to begin this journey in the first place, not to mention pivot and even admit faults along the way. For all the complaints and whinges, however on the ground, most Canadians are proud that they tackled the canna question at a federal level.

As the industry now does a bit of an annual review and revisit, what are some of the largest accomplishments, takeaways (and let’s be honest, major f*ckups) so far? And where is this all headed as the industry at least tries to gear up for another year, if not quite Cannabis 2.0?

The Big Bravos

Launching in the first place. Yes Full Monty Recreational was scary, and delayed a few months last year. And even though there have been many problems (retail outlets, online sales, privacy, supply chain issues in every direction, ex im, foreign markets and etc.), it is up and running.

In comparison, the Brits have been haranguing over Brexit for the last three years and are still not really there.

Further, it is also apparent that the agencies in charge of the new industry are themselves giving a bit of a shake after CannaTitanic (CannTrust). That was embarrassing for them too, although of course, while a bit of a negative compliment, the recall system seems to work.

Even if it needs a few jump starts via whistleblowing.

That in and of itself is a fact that is still in the room, although perhaps the pancaking of the stock price of most of the public industry of late was also another much needed wakeup call.

The Devil In The Details

Domestic Requirements. Health Canada is getting hip to the fact that the industry needs a bit more of a heavy hand. See the book thrown at CannTrust. No matter what, Canadians are demanding to know where their cannabis comes from, and further are also demanding that it be at least free of pesticides that can harm them.

Licensing. Many cannapreneuers are complaining, still, about the delays in licensing, particularly for retail outlets in the provinces who are taking the cannabull by the horns.  That said, there are still lots of enterprises who are perfectly happy to dodge the requirements all together and sell to the black or gray market. No licensing fees, and no taxes is a wonderful dream, but that is not exactly how regulated democratic capitalism works – at least at this level.

Supply Chain Logistics and Related Technologies. Canadians are struggling to implement a regulated industry in a country where patient home grow is constitutionally protected, and in an environment where who can sell what, and to whom including online, is still evolving. Predictably, no matter how groovy the solution works at home, (or the U.S.), no it will not fly in Europe. See GDPR regs, for starters.

Seed Culture (Aka Strain Protection). No matter how much the lawyers in the colonies are gearing up to sue each other over Huey’s Half Baked, in Europe, there are tomato and pepper farmers who are laughing, literally, all the way to the bank on this one. While hip to be a “strain defender,” the reality in a medical market looking for cheap cannabinoids is rather different. Effective, clean product, which can be reproduced reliably and cheaply, is the name of the game. Girl Scout Cookies, and such ilks will be a long time in coming as anything but highly expensive, niche products you can find in a Dutch Coffee Shop.

GMPDomestic Requirements Vs International Export. Canadian standards, so far, have been widely divergent in an environment where exports to Europe in particular are part of the story for the biggest companies. That said, GMP, and in particular EU GMP, has become at least a buzzword if not a standard to live up to.

Privacy. California might be considering its own form of GDPR (European privacy legislation) but so far, the industry has largely failed to protect consumers (from themselves). Ideas about owning huge data troves on cannabis users for someone else’s profit are still very much in the room. After all, data is the new oil, whether people know their data is being harvested or not. And just like big oil has done for most of its existence, those in the driver’s seat so far show little compunction about harvesting personal information, to become in the words of the now departed CEO of Canopy Growth Bruce Linton, “the Google of Cannabis.” Won’t happen. Starting with the fact that in not just Europe but now even California, people, far beyond pot users are tired of a world where privacy is a second class right.

While the issue first hit in Canada on the recreational side, the reality is that companies know who their clients and patients are in a way that is not only disturbing but increasingly being challenged.

european union states

Safeguarding Your International Supply Chain: The Brave New World Of Cannabis Compliance

By Marguerite Arnold
No Comments
european union states

The CannTrust story may have shocked the uninitiated, but it hit almost every bogeyman the legitimizing industry has both feared and suffered from, particularly of late.

Here, generally, is the issue. Especially in Europe (even more especially in places like Germany, the UK and other emerging markets), budding cannapreneurs need each other. A distributor in Germany, for example, cannot get their final (federal) licenses allowing them to do business without establishing a relationship with an existing producer. That producer also needs relationships with established distributors to get their licenses.

In a fraught world, where all parties are evolving rapidly (and this also includes the “Big Boys” from Canada and several U.S. states including California), supply chain logistics, and even contract agreements if not licensing beyond that requires a level of honesty, integrity and transparency the industry, largely has not achieved yet.

That said, there are also parties, if not individuals and companies determined to set themselves on the straight and narrow – and play by the emerging “rules” – and then there are also clearly companies which, well, do not.

Being out of compliance, at any step of the chain, including when your product is sold via government agencies, is already a recipe for disaster.What this brave new world of cannabis requires, however, and from everyone – from grower, to manufacturer, packager, distributor and service delivery – is that all ecosystem partners must be in compliance.

Ensuring that can be a full time job. But what it also means is that to have a fully compliant product, every party in the chain bears responsibility for upholding standards that so far have proved hard to reach for many.

The time has come, in other words, where that is no longer an option.

The First Step Is Certification…

GMPIn a world where every member of the diverse cannabis ecosystem requires certification, determining what, and from whom is the first hurdle – both for buyer and seller. If one has GMP-certified product, that is awesome. But there are also treaties in the room that only allow some GMP certifications to be considered equal to others. If you are in Lesotho right now, for example, far from Europe, your biggest concern is not just looking to the EU but figuring out a way to export your crop into your neighbouring (and surrounding) country – namely South Africa.

This example, while seemingly far away, in fact, is the biggest bugbear in determining who can sell to whom even within Europe (let alone countries just outside and far beyond the region).

Determining cert presence, if not validity, however, is only the tip of the iceberg. And depending on who you are, that path alone is not a one time dalliance with authorities, but multiple certifications that must all also be kept current.

But It is Not The Only One…

The second hurdle, of course, is also checking the verity of everyone you do business with. For a producer, this includes making sure that processing, packaging, and even transportation are in compliance. In Canada, of course, this has been short circuited by the ability of producers to ship directly to patients.

In Europe, however, this is far from the case. And that is also why the entire conversation is also getting not only much more granular, but expensive. Pharmaceutical regulations are actually what guide the rules of the road here.

european union statesWalking floors, and checking, in person, may or not be mandated by international treaties at this point. However, most of the young producers on the ground here are implementing policies of personal visits to their vendors. In Massachusetts of late, this is also on the drawing board. Albeit on a “state” level, the reality is that both federal, state and more local training is a watchword, if not a must, now on the roadmap.

Being out of compliance, at any step of the chain, including when your product is sold via government agencies, is already a recipe for disaster.

And while that obviously is a challenge, companies must step up to the plate internally to commit to the same. It is too dangerous to ignore such steps. Including the easy to reach ones, like staff background checks and decent cybersecurity safeguards. The former has blown several enterprising cannadudes out of the driver’s seat already in Europe over the last few years. The latter is an emerging threat in a region that is also home to GDPR regulation (and growing fines).

For that very reason, certainly on the ground in Germany if not across Europe and in those countries and companies that wish to supply the same, supply chain verification, that is constant, consistent and verifiable, is the path for the industry both as of now and in the immediate future.

When You Don’t Know What You Don’t Know: Debunking Cannabis Insurance Myths

By , T.J. Frost
1 Comment

For all of today’s growing acceptance and legitimacy with cannabis, the reality is that today’s operators – whether growers/producers or dispensary operators – still face risks in running their businesses. If, in the old days, a customer got deathly ill from cannabis contaminated with something from somewhere during the distribution chain, oh, well. But now that there’s a legal system of checks and balances; there’s recourse when issues arise.

The problem is that the business is so new that most people don’t know what they don’t know about mitigating those risks. And that, unfortunately, extends to many in the insurance business who need to be doing a better job helping put the right protections in place.

One grower bemoaned to me at a cannabis trade show, “I sure wish I could insure my crops.” What? “You can,” I told him. His old-school ag broker didn’t know any better and didn’t do him any favors with his ignorance. But it brought home the point: We have to start treating cannabis like the real business it is.

Reviewing the existing insurance policies of today’s cannabis businesses uncovers some serious gaps in coverage that could be financially crippling if not downright dangerous should a claim be triggered. Retail dispensaries, for example, are high-cash businesses, making banking and trusted employees a must-have.Today’s cannabis businesses need to understand there will be risks but they are a lot more manageable than in the old days. 

And a close eye must be cast to lease agreements for hidden exposures, too. We know a Washington state grower that had no property insurance on its large, leased indoor growing facility. The company’s lease made its owners, not their landlord, responsible for any required building improvements. It was one of a variety of serious exposures that had to be fixed.

Today’s cannabis businesses need to understand there will be risks but they are a lot more manageable than in the old days. Rather than find themselves under-insured, they can start by learning what they probably have wrong about insurance. Dispelling three of the most common myths is a good place to start.

Myth #1: Nobody will insure a cannabis business.

Not remotely true. You can and should get coverage. Think property and casualty, product liability, EPLI and directors and officers, employee benefits and workers comp. Additionally, you should be educated on what crop coverage does and doesn’t cover. Depending on your business’ role in production and distribution, you might also consider cargo, stock throughput, auto, as noted, crime and cyber coverage. It pays to protect yourself.

Myth #2: If my business isn’t doing edibles, I don’t have to worry about product liability insurance.

The reality is that product liability may be the biggest risk the cannabis industry faces, at every level on the supply chain. There’s a liability “trickle down” effect that starts with production and distribution and sales and goes down to labeling and even how the product is branded. Especially when a product is an edible, inhalable or ingestible with many people behind it, the contractual risk transfer of product liability is an important consideration. That means the liability is pushed to all those who play any role in the supply chain, whether as a producer or a retailer or an extractor. And all your vendors must show their certificates of insurance and adequate coverage amounts. Don’t make the mistake of being so excited about this new product that you don’t check out the vendors you partner with for this protection.

Myth #3: Any loss at my operation will be covered by my landlord’s policy.

As the example I cited early illustrated, that’s unlikely. Moreover, your loss might even cause your landlord’s insurance to be nullified for having rented to a cannabis business. It’s another reason to examine your lease agreement very carefully. You want to comply with your landlord’s requirements. But you also need to be aware of any potential liabilities that may or may not be covered. Incidentally, even if your landlord’s policy offers you some protection, your interests are going to be best served through a separate, stand-alone policy for overall coverage.

These are interesting times for the burgeoning legal cannabis business. Getting smart – fast – about the risks and how to manage them will be important as the industry grows into its potential.