Tag Archives: Supply Chain

Soapbox

Can Cannabis Avoid Alcohol’s 3-Tier Distribution System?

By Rick Kiley
No Comments

As an experiential marketer that works with a lot of vice-oriented brands, I’ve always been fascinated by the story of the rise of spirits in the US – a history marked by ingenuity in the face of heavy restrictions, clashing social norms, crime and political ideals. Since then, those same qualities have emerged in the story of cannabis and how, against all odds, it has recently begun to push its way into the mainstream. But on the path to legalization, cannabis can also learn a lot from the spirits industry about what not to do.

For example, when laws governing the spirits industry were written in the post-Prohibition 1930s, the federal government wanted to create an equitable landscape. So, they created a 3-tier system – manufacturers or importers must sell to wholesalers, wholesalers must then sell to retailers and retailers sell to us. They figured that keeping manufacturing interests separate from wholesale and retail interests would keep any large company from owning an entire supply chain, muscling out smaller competitors.

In theory, it’s not a bad idea. Imagine the consequences of massive companies like Diageo or AB InBev using their money to pay bars and liquor stores to only stock their brands and not competitors. Add on the Tied House Laws, which basically says an entity in one of the three categories cannot have an ownership stake in any of the others, and you get a seemingly even-handed marketplace.

Tied House Laws theoretically limit one entity from monopolizing a supply chain

In truth, it makes it almost impossible to be disruptive or for new brands to break through. Other industries have innovated by cutting out the middleman and selling direct-to-consumer – something that simply cannot happen in alcohol (minus the wineries and distilleries that can sell direct out of their tasting rooms). Also, now distributors are so consolidated that there are only one or two big distribution companies in each state. So, as a company trying to bring a new product to market, you have to get into one of these highly selective and competitive distributors if you are going to be successful – a challenging ask for a small, independent brand.

Protection racket

Now, imagine that same challenge coming to the cannabis space. With legalization around the corner, the adult use (as opposed to medical use) cannabis industry could easily look like alcohol in the rules that will be set up.

The demand for high quality cannabis continues to increase, but the prices need to level out to stave off the black market.

Right now, adult use manufacturers can sell their products to dispensaries directly. Some use a distributor, but there is no nationwide mandate to – which is probably for the best. If a distributor isn’t a requirement, it forces brands to offer something new to differentiate themselves. It will spark innovation, rather than add an extra profit margin that will get rolled into the final price – a price that is already higher than it should be due to the murky federal legal status. Adding complexity and cost will only make it harder to compete with the illicit market. For the industry to grow, costs for illicit cannabis can’t be lower than its legal counterpart.

Of course, we are in the nascent stages of legalization here and we’ve come a long way culturally and technologically since the 30s. But remember, the rules governing alcohol were written nearly 100 years ago along with the passage of the 21st amendment repealing prohibition. Startlingly, those laws haven’t changed that much since they were written, so any mistakes made now in dealing with the cannabis industry could last for a long time.

A new way forward

What the cannabis industry needs is a new model for the adult use/recreational space, keeping some of what exists in the alcohol industry but without ever mandating use of a distributor – the middle tier. This would mean keeping Tied House Laws in place and applying them to cannabis so that a manufacturer could never hold an interest in a retailer, while still allowing them to sell directly to dispensaries and to consumers. Currently, some states allow for vertical integration, which would change under Tied House Laws.

This should be pretty simple, since most states are already separating licenses by type of activity (manufacturer, retailer, etc.) and it would promote competition while bringing the widest array of products possible to each consumer. Also, it would prevent any behemoths from squeezing out the up and comers.

extraction equipment
Constant innovation is a hallmark of the cannabis market and a key factor in continuous growth.

Of course, some retail license allowances could be considered on a case-by-case basis. For example, I would carve out an exception that growers/manufacturers could sell direct to consumers through a single “tasting room” at their brand home. This is similar to the operations of microbreweries, distilleries and wineries. It would encourage education for consumers, and provide great opportunities for brands to show why their products are better or unique.

Given the technology and logistics solutions available to businesses in a 21st century economy, mandated distributors create a sometimes-unnecessary barrier to an already efficient supply chain. If mandated, prices will inflate to cover added margin, thus making it harder to bring consumers over from the legacy market to the legal one. I’m not against the idea of a distributor – they can add tremendous value, but the mandate would seriously curtail industry growth.

Direct-to-retail and direct-to-consumer sales are necessary for the economic health and growth of the industry. Without this, using alcohol as a cautionary tale, at some point the middle tier cannabis brands will inevitably begin to wield an outsized amount of power. We are living at a time where innovation is going to be the key to explosive growth in the cannabis industry, so it’s important to do everything possible to let the market find its way without falling into a century-old trap.

Flower-Side Chats Part 6: A Q&A with Fabian Monaco, CEO of Gage Cannabis

By Aaron Green
No Comments

In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses integrate innovative practices in order to navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

The Michigan cannabis market is making pace with big time cannabis players like California (#1) and Colorado (#2). For the first quarter of 2021, combined cannabis sales in Michigan were nearly $360 million. At that pace, Michigan could see combined sales of $1.4 billion — well outpacing 2020 sales of $984 million.

Gage is the exclusive cultivator and retailer of world-leading cannabis brands including Cookies, Lemonnade, Runtz, Grandiflora, SLANG Worldwide, OG Raskal, and its own proprietary Gage brand portfolio in Michigan. The company recently secured a $50M investment in an oversubscribed round which included a $20M investment from JW Asset Management.

We spoke with Fabian Monaco, CEO of Gage Cannabis. Fabian started Gage in 2017 after meeting his operating partners in Michigan. Prior to Gage, Fabian worked as an investment banker racking up a number of firsts in cannabis industry financing and M&A transactions.

Aaron Green: Tell me how you got involved in the cannabis industry.

Fabian Monaco: My background is in investment banking – specifically 10 years of capital market experience. I was fortunate enough to be part of the initial team that brought Tweed, now Canopy Growth public. In fact, I worked on a lot of firsts in the industry: the first acquisition, the first $100 million financing, the first IPO in the space. Shortly after that, I went to XIB Financial, which co-founded Canopy Rivers with Canopy Growth. I was working on that when I encountered these two phenomenal operators. At the time, I had visited over 100 of these cultivation facilities and these were some of the best operators in the business. So that led me to start Gage in 2017.

Green: Where is Gage currently operating?

Fabian Monaco, CEO of Gage Cannabis

Monaco: In the U.S., we are purely operating in Michigan. We do have a licensing agreement with a small producer in Canada, so you will see the brand there.

Green: Tell me about your choice to settle the company in Michigan initially?

Monaco: If you look at Michigan as a historical cannabis market, it was the second largest cannabis market from a medical card holder standpoint for nearly a decade, only behind California. This was probably the case until 2019, where they went to adult use. So, for us, we knew this medical base was going to be a great platform to an outsized adult-use market. And already we see that April was $154 million in sales, adding up to over a $1.8 billion dollar run rate. That’s the third highest run rate in the country, only behind California and Colorado.

Green: What is it that makes Michigan different? You talked about medical cannabis already. Is there anything else about the demographics in Michigan or the consumer base that makes Michigan special in that sense?

Monaco: In Michigan, over 70% of the population is old enough to consume. So, when you take a look at how much of the population is 21-years-old plus, relative to other markets, the total addressable market in Michigan is just huge. Then when you take a look at their consumption habits, especially when it comes to flower, Michigan is consuming some of the highest amounts on a per capita basis. Those two stats set up a scenario where we foresaw the potential of the market. To be honest, the market has exceeded our expectations. We didn’t think it would be this strong this quickly. Right now, the state is looking to be a $3 billion market by 2024 – and it could easily surpass that.

Green: Any plans for expansion beyond Michigan?

Monaco: We’ve been to eight or so different states in the past 60 or 75 days really trying to educate ourselves on the licensing structure, the markets there and the key players in those respective markets. What are some of the costs, in terms of acquisitions? We really want to branch out the Gage brand into other states across the US. The thing is, we believe in the model that Trulieve deployed. They really focus on being the number one player in a very, very big market. For instance, Trulieve is obviously one of the top players in Florida. We’re trying to mimic that strategy.

Trulieve is a dominant market force in Florida

Once we have that deep market penetration, that market share, then we’ll start to get into other states. But for now, why would you want to go and rush out to another state when you’re already in the third largest market in the country?

Green: Are there any criteria you look for in a potential expansion state?

Monaco: We look at consumption habits. We want states with similar demographics to Michigan. Close proximity states also allows us to quickly go from one state to the other without having to take a multi-hour flight to get there. States we’re considering are Northeast and Midwest states, like Illinois, Pennsylvania, Ohio, New Jersey, Massachusetts and Maryland.

Green: What kind of consumer trends are you seeing in Michigan as it relates to products?

Monaco: Flower continues to dominate. In a market like Michigan, we have some of the top flower consumers in the country on a per capita basis. We specialize in flower and flower only, so this created a perfect scenario where we are able to ramp up our brand quite quickly, from a flower standpoint.

Now that we have that brand equity, that brand power, we are going to potentially delve into other categories, including extract-based products, such as vape carts and concentrates. You hear talk about these new beverages, but we’re not seeing that take off in this market as much as people think it would. Flower still remains at the top and that’s something we highly anticipate going after for quite some time.

Green: Can you tell me about your vertical integration strategy?

Monaco: We’re one of the larger retail portfolios in Michigan right now. We have 13 locations. Nine are operational. So, we’re really in a great spot overall in terms of how big of a platform we do have – one of the larger ones – and, frankly, in one of the larger markets in the country.

The Cookies flagship dispensary in Detroit, Michigan

We actually have a little bit of a unique scenario on the cultivation side of things. We have our own three cultivation assets that are going to be producing, on average, about 1,000 pounds of product over the next couple of months as they fully ramp up. We’ve actually contracted out a lot of our cultivation. Cultivation is time consuming, and it’s also very, very costly to build out. Luckily for us, we’re a really well-established and strong brand. We had the opportunity to contract out our growing. So, we have 10 different contract growth partners. These are phenomenal cultivators, again, some of the best in the state. They grow Gage and Cookies branded product for us. We have a great breakdown from a financial standpoint. We share the retail revenue with them on a 50/50 basis. They pay a little bit too, for packaging and testing. So, basically for $0 we’re getting product on the shelf where we’re achieving 50% plus gross margins. It’s a phenomenal setup for us on the cultivation side where we went from two cultivation assets in the latter half of last year to now eight different cultivation assets, moving to 13 by the end of the year.

On the processing side, we’re just actually finishing our processing lab. We should have extract-based products launched in Q3. We’re really excited to have our own line of extract-based products. We plan to focus on vape carts to start – a very popular category in Michigan on the retail side of things.

Green: Are those cultivations all indoor?

Monaco: Yes, we’re big proponents of indoor flower. It allows us to control the quality of our flavors and consistency in our strains when we grow indoors. From our consumers, there is a very strong demand for indoor grown high-premium, high-quality products.

Green: What sets Gage apart from other competitors in Michigan?

Monaco: I think focus. We just focused on our flower. We focus on our post-production process. We hang dry everything, we hand trim everything, and we hand package everything. That’s a little bit more time consuming. It’s a little more costly. But all that effort shows in the end product which is key.

A lot of people think you can grow great quality product, you cut it down, you dry it and put it in the pack and it’s going to be great. You really need a strong attention to detail, especially in a big consuming market like Michigan, because again, they are a refined consumer. They’re looking for the best. They’ve already been consuming some of the best quality products in the country for many years now. So for us, we put a painstaking process in place for flower production, not only from the growing standpoint, but also through the end of that post production process.

Ancillary to our cultivation process is also consistently providing new varieties of flavors on the flower side of things to the consumers. When you look at the successful brands in California, what makes them special is that they’re consistently pheno hunting, coming out with new flavors. This is similar to the wine industry where the best wineries come out with a new kind of grape or mix and consumers get excited, they rush out and buy half a dozen bottles or a dozen bottles.

It’s a very similar scenario in the cannabis industry. I hate when people say that cannabis is a commoditized industry. It’s so far from the truth. You look at brands like us or Cookies, Jungle Boyz and you can see their constant innovation, their constant drive. They are always bringing something new for the consumers to try. That’s what really sets apart the best brands.

Green: What’s got your attention in the cannabis industry? What are you interested in learning more about?

Monaco: I’m always intrigued with new ways of consuming. Across the U.S. and well-developed markets like California and Colorado, you see all these interesting new ways to consume the product. You’ve got patches, sublingual strips, etc. There are so many unique ways. I am currently seeing how they play out. Are they fads? Do people get excited about them initially, and then go back to their vape carts, pens and typically dried flower pre-rolls? I’m always trying to educate myself to see what’s on the market. What’s new? Who has a new drink? How does it hit? Are people excited about it?

Also, I am constantly learning about new brands that come out. There are so many new small brands that don’t necessarily have the scale or the capital to really expand, but are producing some of the best products in the country in a cool, unique form of packaging, etc..

Green: Alright, great. That concludes the interview!

Monaco: Thanks, Aaron.

Flower-Side Chats Part 5: A Q&A with Bob Fireman, CEO of MariMed, Inc.

By Aaron Green
No Comments

In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses integrate innovative practices in order to navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

Multi-state operators (MSOs) are on the rise in the United States, navigating complex regulatory frameworks to drive profitability through economies of scale and scope. As an MSO and an early mover in the space, a significant part of MariMed’s current strategy is to complete the acquisition and consolidation of the licensed state cannabis businesses it has developed. It takes seasoned leadership to make that happen, and MariMed’s is led by one of the most experienced and successful MSO management teams in the industry. Over the last eight years, Bob Fireman and his colleagues have won 17 licenses in 6 states, and designed and developed over 300,000 square feet of cannabis cultivation, production and dispensing facilities.

MariMed has also developed a portfolio of award-winning cannabis brands and infused products which are licensed, manufactured and distributed in Delaware, Illinois, Maine, Maryland, Nevada, Rhode Island and Puerto Rico. A recently announced $46 million financing for a facility with Hadron Healthcare Fund will help repay all MariMed debt other than mortgage-backed bank loans and one convertible note, as well as help upgrade and expand the company’s owned and managed cannabis facilities.

We spoke with Bob Fireman, CEO of MariMed. Bob started the foundations of MariMed in 2008 after getting into large-scale hydroponics for urban sustainable agriculture. Prior to MariMed, Bob served as a startup lawyer focused on tech and emerging industries.

Aaron Green: Bob, tell me about how you got started in the cannabis industry.

Bob Fireman: I practiced law for decades. Part of my practice was to help startups in all sorts of industries, particularly technology and new emerging markets. At one point, I was introduced to a fascinating sustainable food business opportunity – to build hydroponic farms on rooftops in cities across the country.

Bob Fireman, CEO of MariMed, Inc.

When one of our projects in San Francisco hit some roadblocks, our team there pivoted to what was becoming the Wild West of California cannabis. My friend and current MariMed CFO, Jon Levine, and I began investing and managing a cultivation site there. That’s where we built our early foundation of industry knowledge.

Fast forward a few years, and I was afforded the opportunity to be involved in the drafting of the proposed Massachusetts medical cannabis legislation.

Through that work, we met a team that had won one of three cannabis licenses in Rhode Island. We formed a real estate LLC and raised the capital to develop a seed to sale cannabis facility in Providence, which was later leased to the Slater Center, a not-for-profit medical cannabis licensed business. Today, the Slater Center is a nationally acclaimed operation that services over 10,000 medical patients.

From there, we took our know-how and formed a new entity that was the formal beginning of the company we now know as MariMed. Initially, we helped win licenses for clients in Massachusetts, Delaware, Maryland, Illinois and Nevada. We also provided management services, working capital and other necessities. Under our management, we organically built these businesses from the ground up, advancing best practices and somewhat quietly creating a network of best-in-class operations throughout the industry.

That led to the consolidation of those businesses that we’re focused on today as a core strategic pillar.

I’m incredibly proud of our team, the core of which has been at this for 10 years. We’ve watched other MSOs try different models of success, with varying degrees of success. For us, focusing on growth markets, building at a reasonable and scalable clip, attracting incredible talent at all levels of the company, and developing fantastic brands that customers love, are the ingredients that have translated to where we are now – strong performance and an exceptionally bright future. “Slow and steady wins the race” has become a mantra.

Green: What trends are you looking at right now? What’s on your radar?

Fireman: My radar has a singular focus, and that’s to create shareholder value. That’s why completing the consolidation of the cannabis licensed businesses we’ve developed and manage into our public company is so critical. Back in the day, the initial available licenses were in medical-only state programs where applicants were required to be not-for-profit state companies. Accordingly, we raised the capital in the real estate entity which leased facilities to the licensees. Our revenue was from rents, management services and licensing fees.

Panacea Wellness in Middleborough, MA is one of MariMed’s adult use cannabis dispensaries

In 2019, we implemented a new strategic plan to consolidate these businesses. While that translates to our being structured similarly to other MSOs in that we are a vertically integrated seed to sale company, we are distinct in our operational excellence, quality product portfolio, and strong balance sheet. Other MSOs have raised large amounts of capital to pay large sums to acquire licensed state cannabis businesses and have found themselves over-leveraged and challenged to assimilate other companies’ methodologies and cultures. By consolidating the businesses and talented people we developed and managed from day one and utilizing our best practices and processes system-wide, we realize enormous capital efficiencies.

Our strategy is paying off. Our core cannabis revenue in 2020 increased 207% to $50.9 million, and our 10k reported EBITDA of $16.3 million. And now we’re on track to double our revenue in 2021.

The last piece of the puzzle is to let the world know what we’ve been doing. Slow and steady has worked for us but gone are the days of doing so quietly. We’re proud of what we’ve accomplished and exceedingly bullish on what’s to come.

Green: What do you look for in an M&A target?

Fireman: When M&A makes sense for us, we first look for single operators and entrepreneurs in states where we are not active and look to partner with business leaders that had the vision and the courage to get into this industry and build solid cannabis businesses from the ground up. I’m looking for businesses that could benefit from being part of a larger, more experienced and well-capitalized company like MariMed. Obviously, as an MSO with a solid platform, MariMed is approached regularly by other MSOs and banks suggesting candidates for M&A opportunities. Lining up with a company that has complementary cannabis licenses in other states and who shares our vision and ethics could be a win-win situation. They must embrace our commitment to diversity, the environment and proper corporate governance. We have been somewhat reticent to do this until we see some increase in our share price and market capitalization.

Green: Are there any new products, or product trends that you’re looking at?

Fireman: Marimed looks to be the most trusted source of high-quality cannabis products that consistently delivers innovative health and wellness solutions to our patients and customers. Our lab scientists are constantly creating and testing new and innovative formulations of cannabinoid compounds including CBD, THCa, CBG, CBN and others that will improve the health and wellness of our customers.

Our brand portfolio is ever-expanding with new and better product offerings. Our award-winning Betty’s Eddies Fruit Chews brand is adding new SKUs of varieties and flavors for both medical and adult use programs. Our Nature’s Heritage flower and concentrates brand is adding a line of solventless concentrates, live rosin, as well as new formulations for RSO, an oil popular with medical patients. Kalm Fusion is expanding its successful line of powdered drink mixes as we see more movement in the cannabis beverage category.

Microdosing is hugely popular right now, and we’re rolling out products in the 2-5mg dosage range. Health and dietary concerns are top of mind as well, and we offer products that are vegan, sugar-free and gluten-free. Ultimately, we want to be sure that we have something on the shelves for every single consumer. The financial hardship created by the pandemic has made consumers more attracted to value added products such as popcorn buds.

Green: You recently announced an equity financing from Hadron. I’m curious to learn more about it from a nuts-and-bolts perspective if you can share any of that information.

Fireman: Over the last year, access to the capital markets for equity raises in cannabis public companies was difficult. The cost of debt was and is still high, and we were looking for a long-term financial partner that understood the industry and could assist us. Hadron Capital has been successful for several years investing in some of the most successful MSOs and they saw the value and potential in MariMed’s experienced management and great assets.

Hadron invested $46 million in equity in MariMed this March. Approximately $16 million was utilized to retire all our short- and long-term debt but for bank secured debt and one convertible note. $7 million is committed to funding our capex and expanding the capabilities of our facilities, enabling us to grow more flower and automate production. The balance of funding will support our consolidation strategy to fund two more roll ups of state licensed cannabis businesses into the public company.

Going forward, it is comforting to have a capital partner to assist us in future acquisitions and M&A opportunities.

Green: I’d love to learn more about your Nature’s Heritage brand, particularly as it relates to the cultivation and the flower products.

Fireman: Our COO Tim Shaw has assembled a cultivation and production team with expertise in all aspects of genetics, growing methodologies, extraction techniques, and packaging innovation. That’s provided us a rich collection of quality genetics that make up Nature’s Heritage, our top-selling flower, oil and concentrate brand in Massachusetts and Maryland. We’ve recently expanded the line to include Rick Simpson Oil (RSO) and solventless concentrates (including live rosin) and have been receiving stellar feedback.

Green: What are you interested in learning more about?

Fireman: Over the last decade, the MariMed core team has seen the emergence and amazing growth of the cannabis industry. The initial medical programs in California and Colorado have now led to some form of legal medical or adult use cannabis programs in over 33 states and districts.

We are most interested in learning and following the federal, state, and international laws and regulations. It is vital to know how these laws will affect our company and the industry as a whole. When might full federal legalization become a reality? What might different versions of the law be? Will state legal programs be protected as well as the companies that took the risk in investing in the industry at its nascent state and how? What will FDA requirements and regulations look like? What medical claims will companies be allowed to make, and what kind of research or trials will be required to put a product on the shelf? What are the ramifications of the MORE Act or the SAFE Banking Act?

Responsible MSOs need to be prepared to rise to or above the standards of care of other industries. A lot of this was impossible in the past because of federal prohibition laws. Soon, if not already, labs and manufacturing processes will need to be GMP certified and more. Consumer data will need to be HIPAA compliant. Cannabis companies have to be good corporate citizens: diversity and equal opportunity should be embedded in business decisions, and commitment to ESG and sound environmental and social policies with good corporate governance need to be in planning and implemented.

Following the laws and holding ourselves to the highest possible safety and business standards will allow the cannabis industry to finally become “mainstream.”

Green: Alright, great. Thank you, Bob. That concludes the interview!

Flower-Side Chats Part 4: A Q&A with Adrian Sedlin, CEO & Founder of Canndescent

By Aaron Green
No Comments

Flower continues to be the dominant product category in US cannabis sales. In this “Flower-Side Chats” series of articles Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

Canndescent is a vertically integrated flower brand based out of Santa Barbara, CA with grow operations in Desert Hot Springs. Having opened the first municipally-permitted cultivation in California, Canndescent has pioneered luxury branding in the cannabis space with a focus on user friendliness. They were the first cultivator to market cannabis using effects like Calm, Cruise Create, Connect, and Charge rather than the strain name. Canndescent also recently launched a social equity brand, Justice Joints, with 100% of all profits going to cannabis-related expungement and re-entry programs.

We spoke with Adrian Sedlin, CEO and founder of Canndescent to learn more about his transition from tech to cannabis, how he thinks about product positioning and the company’s motivation for getting into Justice Joints. Adrian founded Canndescent in 2015 after being approached by his brother-in-law who ran a legacy cultivation operation. Prior to Canndescent, Adrian was an entrepreneur and worked in startup turnarounds.

Aaron Green: How did you get involved in the cannabis industry?

Adrian Sedlin: I started looking at the industry from a professional perspective in 2015, and once I came to understand how cannabis affects the endocannabinoid system, I became absolutely fascinated by the opportunity to build a world class cannabis company that prioritized consumers. Particularly, I became interested in the adult-use market because I see cannabis as an automobile compared to the horse and buggy of alcohol. Cannabis is a superior adult use solution from a health and society perspective, yet, the entire positioning of the industry at the time was sub-prime, non-aspirational and inaccessible. With Canndescent, the core idea was to counterprogram the existing paradigm and deliver cannabis in a way that was beautiful. To bring the power of the plant to more people, we had to reposition the category and simplify the shopping experience. Moreover, there were too many unsolved consumer problems. For example, in 2015 people said cannabis was a commodity but any stoner knows there are as many dimensions to consider as there are with wine. The opportunity to deliver consumer solutions in a nascent industry that desperately needed advocates while helping to improve the world was enough to get me out of retirement.

Green: Just curious, what was your background prior to cannabis?

Adrian Sedlin, CEO and founder of Canndescent

Sedlin: I’m a lifelong entrepreneur. I started my first company when I was still in college. After graduation, I ran that business for another four and a half years, sold it, and went back to business school and got my MBA. After Harvard, most of my career was spent in early-stage growth companies, turnarounds and pivots. When someone had $10 million invested in an enterprise or their company wasn’t growing at the rate they wanted, that’s when my phone would ring.

I was lucky enough to shepherd a number of companies to a successful exit several times. During my professional journey, I’d taken a year and a half off between 2004 and 2006, and then pre-cannabis in 2015 I had taken three years off and was getting a little itchy. I didn’t think I was permanently retired; I was just sort of waiting for the next thing to get excited about. And cannabis definitely was the first time I can say in my life that I finally understood what I was put on planet earth to do.

Green: I understand that Canndescent was the first municipally permitted cultivator to open in California?

Sedlin: Desert Hot Springs was the first city to legalize cultivation, and we were the first ones to operate in the city.

Green: How did that come about?

Sedlin: The city had conditional use permits, but a lot of people were trying to do ground up builds. We decided to do a retrofit of an existing facility. So, we were the first ones to get the regulatory permit and cultivate in a way that was truly compliant with MCRSRA which eventually became MAUCRSA.

It took lots of tolerance for ambiguity and incredible patience. There’s an off-putting expression that goes, “pioneers take the arrows.” Well, we took a lot of arrows along the way. A perfect example is within our first year of operation, the fire department sent us five cease-and-desist orders to turn off our CO2. Not because we were doing anything wrong, but because they changed their regulations and then they wanted us to immediately comply as opposed to giving us a transition period. You just got to learn to roll with it. I’d say anyone who got into the regulated cannabis market early – and there’s a bunch of us who are still standing – you just learn to roll with it, be patient and yet, apply boundless energy and passion to the process.

Green: Did you know you wanted to be in Desert Hot Springs? Or did it just turn out to be the permit that was the easiest to get?

Sedlin: That was a binary choice for us. The simple choice for Desert Hot Springs was that it was the only choice. We were doing a professional execution. We were taking investment dollars, and I couldn’t have any ambiguity of being in the gray market. This was before adult use legislation passed in California, so we were functioning under California’s Medical Cannabis Regulation and Safety Act (MCRSA). The only way to be compliant with MCRSA at the time and be a medical cannabis cultivator was to get city-based permission or county-based permission, and the first region to authorize that was Desert Hot Springs. From our team’s perspective, wanting to build a truly compliant company from day one, that was the only choice available.

Green: I understand your facilities are powered by solar?

Sedlin: We have several facilities. One of them is a greenhouse that has light supplementation. We have an indoor facility that is powered by solar. When we opened the facility, it didn’t have a solar project on it. After we opened it, about a year and a half later, we did this full solar retrofit. We found the solar panels offset 38% of our energy consumption.

Green: Your product marketing is effect-forward. How did you come to that positioning for the brand and for the products?

Sedlin: The idea is to simplify life for consumers and unburden them from having to understand the 6,000 different strain names that are out there which have no consistency from cultivator to cultivator.  Before Apple popularized the graphical user interface for computers, the standing orthodoxy among engineers at the time was that everyone should have to learn how to code. Everyone who wanted to use a computer needed to go through the mind-numbing MS-DOS process. But computers didn’t scale that way. Apple’s genius is that it built technology to serve humans with a GUI and didn’t put humans in service of the technology. Similarly, you shouldn’t have to learn 6,000 strains, 100+ terpenes and 100+ cannabinoids to make your first purchase. Our goal has always been to put cannabis in service of consumers as opposed to having the consumer in service of cannabis.

To be clear, Apple doesn’t dumb things down. Apple makes things easier, so that more people adopt them, so those things can then get better. And, that’s really how we’ve always viewed it. At the end of the day, I’m not sure if a consumer needs to know that he or she loves AK-47 when one can understand loosely, “How do I want to feel? Am I trying to relax? What am I trying to achieve?” It’s about prioritizing the consumer over the engineer, or in this case the cultivator or breeder, who covets naming rights. We operate with a consumer-centric philosophy and our company is in service of the consumer.

Green: You have a social equity brand called Justice Joints. What was your motivation for that line?

Sedlin: We have the luxury and privilege of participating in a legal cannabis industry, but there are many people who were never afforded that choice and suffered a steep cost.  With this in mind, we need to put our dollars and sweat into helping communities most impacted and marginalized by the war or drugs and doing our part to address some of the damage.  Justice Joints (JJ), our brand where 100% of the profits go to cannabis-related social equity and expungement programs invites the cannabis community, dispensaries and consumers to vote with their dollars for a better world. “Here’s a vehicle where 100% of the profit goes to cannabis related social justice causes. Are you in? Or are you out?” It gives consumers a platform where they can participate in positive change with their dollars.  It’s what the plant is about.

JJ was the right answer for Canndescent because we wanted to build a self-sustaining economic engine for social justice. We launch world class cannabis brands so building one for social justice was the right choice for us and provided a way for all 250 of our employees to give back and feel proud each and every day.  Justice Joints isn’t a side project; it’s hardwired into the daily activities of Canndescent and will hopefully evolve into an industry-wide, give back platform.

Green: What’s one thing in the world that you want to change or inspires you the most?

Sedlin: The thing I’m most interested in professionally is popularizing the practice of gratitude into the broader business and social fabric. Canndescent is the first company that I know of to incorporate gratitude as a core value. We do so because we believe that happiness is a mindset and a choice, not an outcome. It’s not how many likes you get on your social media, or how much money you make. It’s how you frame your experience to yourself that makes you happy.

On any given day, there’s 100 things I can bitch about, but that just becomes poison ivy that itches and that would make me angry, frustrated and depleted. Living and acting in gratitude, we can move our minds to a peaceful and productive place where we have control and can be our best self for those around us. For example, I just lost my dad on Thursday but I’m focused on gratitude not sorrow. My dad was awesome, died peacefully at age 89, had a 60-year marriage, and loved and gave love. Naturally, there is sadness, but instead of sinking into that, I focus on the blessing of him and meditate on the good. Operating from a happy place, I’m freed up mentally to be there for my mom, sister, wife, children, employees and investors.

So that’s what I’m passionate about. It’s not so much something I want to learn about as much as it is something that I want to cultivate in the world. There would just be more happiness in the world if humanity exercised the muscle of perspective–gratitude. It’s the greatest time in human history to be alive. To listen to the world around us, it’s natural to forget that. But, I’ll take Covid-19 over the Black Plague and Spanish Influenza anyday. “Yes, shit happens, but are you a shit talker and complainer, or are you the type to say, let’s clean this up.” It’s a choice. Canndescent wants to project light and build a world of gratitude.

Green: That concludes the interview, thanks Adrian!

National Ag Day: An Interview with Industry Leaders Disrupting Agriculture in Positive Ways

By Aaron Green
No Comments

National Agriculture Day (March 23, 2021), is an annual event held by the Agriculture Council of America (ACA), a not-for-profit 501-c (6) organization, to increase the public awareness of agriculture’s vital role in our society.

The ACA believes that every American should:

  • Understand how food and fiber products are produced.
  • Appreciate the role agriculture plays in providing safe, abundant and affordable products.
  • Value the essential role of agriculture in maintaining a strong economy.
  • Acknowledge and consider career opportunities in the agriculture, food and fiber industry.

We investigated how the hemp and cannabis industry is disrupting agriculture in positive ways, from automated trimming, to controlled environment agriculture, to water conservation and beyond. We interviewed Aaron McKellar, CEO and President of Eteros Technologies, parent company of Mobius Trimmer and Triminator, Mark Doherty, Executive Vice President of Operations, urban-gro, Inc. and Derek Smith, Executive Director at Resource Innovation Institute (RII) to get their perspective on agricultural innovation.

Aaron McKellar, CEO and President of Eteros Technologies

Aaron Green: Why is hand-trimming inefficient at scale?

Aaron McKellar: Hand-trimming is inefficient at scale because it is so labor-intensive and time-consuming, not to mention repetitive and frankly boring. It’s hard to stay fully engaged as a worker trimming by hand, so the consistency of your finished product isn’t reliable with a crew of hand-trimmers.

Aaron McKellar, CEO and President of Eteros Technologies

A hand-trimmer can produce good quality trim on about 2 or 3 pounds per day. A scaled-up facility running just one Mobius M108S Trimmer can realize up to 120 pounds per hour, replacing many dozens, or even into the hundreds of hand-trimmers. The HR nightmare this presents, and all the associated costs of paying and facilitating dozens of employees (parking, washrooms, lunchrooms, PPE and gowning, etc) is simply unworkable. And that’s before COVID.

Green: How does automated trimming benefit large producers and how does the quality compare to hand-trimming?

McKellar: Not all automated trimmers are created equal. Any of the machines out there will help to reduce the need for hand-trimmers by taking off the bulk of the leaf, leaving a small team of “hand-polishers” to finish it up. The Mobius Trimmer is the only automated trimmer on the market today that leaves the technology of the original machines in the past and employs next-gen technology to truly mimic hand-trimmed quality with stunning through-put rates.

We have high-end producers using Mobius Trimmers whose own QC department cannot discern Mobius-trimmed flower from hand-trimmed flower. Hand polishing crews tend to be far smaller when using a Mobius vs first-gen machinery, and many Mobius users don’t touch up at all, instead going straight to market right out of the trimmer. For a look at how our technology differs from the rest of the field, check out this look under the hood.

Mark Doherty, Executive Vice President of Operations, urban-gro, Inc.

Aaron Green: What is controlled environment agriculture?

Mark Doherty: Cannabis cultivators understand growing indoors because, prior to legalization, they had been doing it for years in the gray market. It is by way of that experience that cultivators learned how to manipulate a highly-valuable, complex plant in an indoor setting. As cannabis legalization spread across the United States, many government regulators required that it be cultivated indoors according to strict regulatory protocols. Fast forward 10 years, and we have an industry that is keenly aware of the indoor environmental conditions required to be successful. Critical factors like heating, cooling, ventilation, dehumidification, and how to best mimic Mother Nature’s energy through lighting are all deliberately optimized.

Mark Doherty, Executive Vice President of Operations, urban-gro, Inc.

With cannabis cultivation driving the advancements of controlled environment agriculture, market and regulatory forces demanded higher efficiency, reduced energy and resource consumption, and clean crops. In most states, cannabis crops have more stringent testing than food crops. For instance, the lettuce in Massachusetts will not pass the standards for cannabis in Massachusetts. It’s through rapid innovation and technology adoptions that the cannabis industry has paved the way for lettuce to be profitably grown indoors.

Green: How can controlled environment agriculture help alleviate supply chain stresses?

Doherty: By growing food closer to the consumer, you reduce food miles; meaning, that link in the food supply chain gets a lot shorter and is less prone to disruption. Whether you have hyper small cultivation facilities on every street corner, or a larger cultivation facility geographically close to consumers, you can grow 24/7/365. Furthermore, growing locally allows for better prediction of facility output—10 boxes of greens on Monday, 50 boxes of greens on Tuesday, and five boxes of greens on Thursday. This eliminates harvesting a large crop before it is ripe and likely requiring cold storage. The controllability of controlled environment ag is that consistent, reliable contribution to the food supply chain and shortening that path to the consumer.

Derek Smith, Executive Director at Resource Innovation Institute (RII)

Aaron Green: What motivated you to publish the Cannabis H2O: Water Use and Sustainability in Cultivation report?

Derek Smith, Executive Director at Resource Innovation Institute (RII)

Derek Smith: Until this report, if you searched for cannabis water usage, you’d basically find one cited statistic. It was “six gallons per plant per day.” We knew this was from a model based on one extreme illicit market scenario. Based on the data we were seeing and the conversations we were having, this number seemed way off. So, we pulled together a multidisciplinary Water Working Group as part of our Technical Advisory Council. The objective of the Water Working Group was to establish a scientific understanding of how, and how much, water is used for cannabis cultivation so that cultivators have confidence in taking steps to be more efficient, and so that industry leaders, governments and media can be accurately informed about the range of water practices of today’s regulated market.

Green: What key points should cannabis cultivators take away from the report? What key points should regulators and policymakers take away from the report?

Smith: As the cannabis industry matures, water use efficiency will become more important, as it has for other agricultural crops. Pressures to use water efficiently will mount from multiple channels including – reducing input and energy cost, protecting the environment, meeting regulatory standards and simply being good stewards. We recommend that industry and regulators focus efforts on the following areas:

  1. When grown outdoors, water for cannabis production should be assessed like any other agricultural crop and be subject to state and local regulations that apply to other crops. Our research indicates that cannabis neither uses a massive share of water nor uses more water than other agricultural crops. Applying the same standards to cannabis as to other agricultural crops will correctly categorize outdoor grown cannabis as an agricultural crop.
  2. In areas where there may be conflict between water use for cannabis and environmental concerns, regulators and the industry should focus (1) on the timing of water use and (2) the potential of storage to mitigate environmental conflict. Our results show that in many parts of the country legal cannabis farmers have ample water storage to satisfy their needs. In areas where storage is insufficient, increasing storage should be a priority for farmers and regulators.
  3. Our research shows there are still massive differences between cannabis production techniques. As farmers continue to experiment and improve, we expect to see water use be a more important part of cannabis farming decisions and expect new plant varieties and growing techniques to be developed that increase water use efficiency. Yet more data from actual farms and facilities are needed to point the way toward the technologies and techniques that drive optimal efficiency and productivity. It is recommended that producers benchmark their performance and governments consider requiring energy and water reporting by producers. The Cannabis PowerScore can assist in these efforts.
  4. As indoor production continues to grow, especially in areas that have unfavorable climatic conditions for outdoor growing, we expect more cannabis users to rely on municipal water sources. Yet, it is unclear if municipal water suppliers are equipped to work with the cannabis industry. We suggest outreach efforts between the cannabis industry and municipal water suppliers to incentivize efficiency where possible.

GMPs & Cannabis Manufacturing

By Kathleen May
No Comments

Editor’s Note: While CIJ typically omits the word “marijuana” where possible due to antiquated nomenclature and prejudicial connotations, we understand the legal distinction between cannabis containing THC and hemp requires the use of the word when referencing federal government policies and legislative language.


Despite the rapid evolution of the cannabis industry, the assurance of safe manufacturing practices remains unclear.Both the Food and Drug Administration (FDA) and the Drug Enforcement Administration (DEA) have imposed significant hurdles for cannabis operators to remain on the “right side of the law.” Therefore, manufacturers of both hemp and marijuana products have been left to figure things out on their own, or choose to ignore existing guidance because the lack of federal oversight allows them to do so. Inconsistent regulation on manufacturing, packaging, labeling and testing of cannabis products offers the potential for unsubstantiated, non-scientific and often times blatantly false claims on product safety and efficacy.

Science vs. Law

Hemp and marijuana are both species of the Cannabis family, Cannabaceae. Genetically they are identical but are arbitrarily defined by the presence of delta-9 tetrahydrocannabinol (THC). While science does not differentiate between hemp and marijuana, the law does.

The hemp industry declared a small victory with the passing of the Agricultural Act of 2014 (2014 Farm Bill). Under this bill universities and state agriculture departments were allowed to grow hemp under state law. Additionally, “industrial hemp” was officially defined by establishing the legal limit of THC at 0.3% on a dry weight basis. The Agricultural Improvement Act of 2018 (2018 Farm Bill), under the guidance of the United States Department of Agriculture (USDA), took things a few steps further by authorizing the cultivation of hemp and removed hemp and hemp seeds from the CSA. The bill however provides no language that mandates the safe manufacture of hemp-derived consumer goods. The 2018 version also preserved the FDA’s authority to regulate products containing cannabis and cannabis-derived compounds under the Federal Food, Drug, and Cosmetic Act (FD&C Act). To the surprise of most, listing cannabidiol (CBD), even hemp-derived, as an ingredient on consumer product labels remains illegal under the bill. Furthermore, CBD product manufacturers are not protected under the current regulations. Since 2015 the FDA has issued warning letters to firms marketing CBD products as dietary supplements and/or foods, and in December 2018, FDA declared it illegal to introduce food containing CBD (or THC) into interstate commerce, regardless if it is derived from hemp. To date, the only FDA approved CBD product is GW Pharmaceutical’s Epidiolex.

Marijuana remains classified as a Schedule I controlled substance under the CSA. Thirty-six (36) states have approved comprehensive, publicly available medical marijuana programs, and now 14 states have approved adult use programs, with New Jersey passing legislation on February 22, 2021. However, the industry has seen minimal movement toward mandating GMP requirements in the marijuana market. Only a handful of medical programs require manufacturers to follow GMP. Furthermore, the requirements are inconsistent between states and the language in the regulations on how to approach GMP implementation is vague and disjointed. This fragmented guidance supports the complexity and difficulty of enforcing a coherent, standardized and reliable approach to safe manufacturing practices.

What is GMP and Why Should You Care?

Good Manufacturing Practices (GMPs) are a system for ensuring that products are consistently manufactured and controlled according to quality standards and regulatory guidelines. The implementation of a GMP compliant program ensures consumer health and safety, allows manufacturers to understand the intended use of their products, allows manufacturers to defend product specifications as being appropriate, considers the risks to vulnerable populations and minimizes overall business risk. In a nutshell, GMP equals product safety and quality, and defines the responsibilities of the manufacturer to ensure consumers are protected from the distribution of unsafe and ineffective products. Currently, the GMP “landscape” in the cannabis space is complicated. The various “flavors” (food, dietary supplements, cosmetics and drugs/devices) of GMP leave many confused and frustrated when making the decision to implement GMP. Confusion is a result of unclear regulatory requirements as well as operators not fully understanding how to classify or designate the end use of their product(s). Implementing an effective GMP program requires proper planning (both short and long term), financial commitment and qualified resources.

Where Should You Start?

As the regulatory landscape continues to evolve and mature in the cannabis space, your business model must consider GMP implementation if you wish to remain successful and sustainable.

Intended Use

Before you can implement GMP you must first understand what GMP regulations apply to the intended use of your product(s). Are you manufacturing food, beverages or dietary supplements? Get acquainted with the FDA Code of Federal Regulations (CFRs) on GMP. 

Conduct a Gap Assessment

A gap assessment allows you to determine your deficiencies in relation to GMP compliance. The assessment should include, but is not limited to facility design, equipment design, supply chain, risk management and employee training.

Develop an Action Plan

Once the gap assessment is complete a comprehensive action plan will be developed to map out the steps required to achieve GMP compliance. The action plan should follow the SMART Goal principles:

  • Specific (simple, well-defined)
  • Measurable (meaningful)
  • Attainable (achievable, agreed upon)
  • Relevant (resource-based, reasonable and realistic)
  • Timely (time-based, defined due dates)

The plan will include prioritized deliverables, due dates and allocated resources in order to strategically plan and execute and complete the required tasks.

Schedule a Mock GMP Inspection

A mock inspection verifies that the action plan was adequately executed. Hire an experienced resource familiar with related GMPs and QMS to conduct the inspection. A successful mock inspection is a perfect litmus test if the end goal is to achieve GMP certification.

Cannabis manufacturers that ignore the obvious progression toward an FDA-like industry will not survive the long game. Those that embrace the momentum and properly plan to mitigate product and business risk – those who demonstrate integrity and are truly in this space to ensure safe, effective and quality products to consumers will come out on top, gain credibility and secure brand recognition.


References:

  • 21 CFR Part 111, Current Good Manufacturing Practice in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements.
  • 21 CFR Part 117, Current Good Manufacturing Practice, Hazard Analysis, and Risk-Based Preventive Controls for Human Food and the Food Safety Modernization Act (FSMA).
  • 21 CFR Part 210, Current Good Manufacturing Practice in Manufacturing, Processing, Packing, or Holding of Drugs; General.
  • 21 CFR Part 211, Current Good Manufacturing Practice for Finished Pharmaceuticals.
  • 21 CFR Part 700, Subchapter G-Cosmetics.
  • 21 CFR Part 820, Subchapter H-Medical Devices; Quality System Regulation
  • Congressional Research Service, FDA Regulation of Cannabidiol (CBD) Products, June 12, 2019.
  • United States Food and Drug Administration-Warning Letters, Current Content as of 02/19/2021.

Links:

Flower-Side Chats Part 2: A Q&A with Bill Conkling, Founder and CEO of Maggie’s Farm

By Aaron Green
No Comments

Flower continues to be the dominant product category in US cannabis sales. In this “Flower-Side Chats” series of articles, Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

Maggie’s Farm is an integrated cannabis company based in Southern Colorado. Maggie’s Farm has seven adult-use and medical dispensaries and cultivates the vast majority of their flower on outdoor farms. All Maggie’s Farm products are sun-grown from seed in soil that is 100% custom-mixed onsite as well as spring-watered, slow-cured and hand-trimmed. Maggie’s Farm does not use any synthetic pesticides or growth hormones in its cultivation. In addition, for the past eight years, Maggie’s Farm has recently obtained Clean Green Certified®, a designation certifying organic standards and testing that mirrors the USDA organic certification. Maggie’s Farm was the first cultivator in Colorado to earn the Clean Green certification.

We spoke with Bill Conkling, Founder and CEO of Maggie’s Farm to learn more about the benefits of outdoor growing, localism and their Clean Green certification. Bill started Maggie’s Farm in 2010 after growing up on cattle ranches and farms in Colorado.

Aaron Green: Bill, thanks for taking the time today. Tell me a bit about how you got involved in the cannabis industry.

Bill Conkling: I am a native of southern Colorado. I was a medical caregiver back in the early days of legalization, and I saw an opportunity to vertically align after my first legal crop in 2010. I opened up the store in 2011. I’ve been a lifelong proponent of medical, recreational and adult use of marijuana.

I come from a background of farmers and I had worked on cattle ranches and farms throughout childhood. As soon as I graduated from college, I went back to work on a large cattle ranch in the four corners area [of southern Colorado]. That’s where I started to incorporate my indoor cultivation experience and skills with outdoor.

Aaron: What trends are you following in the cannabis industry?

Bill: I was one of the first medical operators to support legalization, so I have certainly followed legalization trends. I’ve looked at some other states in our region in terms of growth and legalization.

Bill Conkling, Founder and CEO of Maggie’s Farm

We’re trying to stay a regional supplier and producer so that we are locally grown. We believe the southwest of Colorado is optimal for outdoor cannabis cultivation.

At Maggie’s Farm, we have followed an organic trend from the beginning and I think that’s becoming more of a trend now. We recently received Clean Green certification to that effect. Our goal is to try to provide the healthiest product at a good value to the market.

I believe that all of the products that are made in the cannabis world come from the flower. Downstream products are only as good as their ingredients. It all starts with the flower. So, we focus on producing a clean, top-shelf quality flower that is produced outdoors.

Aaron: How do you define local?

Bill: Local is staying in the climate that is optimal with the least amount of carbon footprint to the earth. That also means trying to operate so that we’re not moving a lot of product across long distances.

We’re trying to set up farms that are in optimal climates. There is a two or three-state region that I believe is the optimal climate for outdoor marijuana cultivation in our country.

Aaron: What states are those specifically?

Bill: I think Colorado and New Mexico, primarily.

Aaron: What geographies is Maggie’s farm currently in?

Bill: We’re in southern Colorado. We don’t go into the plains of Colorado.

Aaron: So Colorado state only right now?

Bill: Yes. The wet mountain range is one of the mountain ranges that we are in. I’ve also cultivated in the La Plata mountain range.

Aaron: What specifically is it about that region that makes it conducive to cannabis growing?

Bill: I think if you get the right elevation and the right microclimates within those elevations, and you have the number of sunny days that Colorado offers in those areas – the intensity of the sunlight, and the cool nights – all those things are factors that coincide in these areas that we like to cultivate in.

Aaron: We’ve been talking about outdoor growth. Does Maggie’s do any indoor?

Bill: No. We’re essentially an outdoor farm. We do a little bit of breeding and we’ve got starter houses, greenhouses and hoop houses for that purpose. We’ve got one greenhouse that we use for some wholesale, but we are primarily outdoors.

Aaron: How do you go about selecting the genetics or evolving the genetics to meet your local environment, given that you’re growing outdoors?

Bill: A lot of it is honestly through testing and experimentation, historically. You just cultivate and harvest and see how the genetics performed, you know? You test, you take test inputs, you take customer reviews, and blind test results from the team and from the customers and you consider all those facts.

Aaron: Do you produce and use your own seeds or are you purchasing those?

Bill: We have done both. I think I’ve probably created somewhere north of 800 different strains at this point. So, we’ve got a huge seed bank. We do also buy from vendors and experiment with some of those genetics as well.

Aaron: Do you market your seeds in Colorado?“I don’t think that you can get anywhere near the terpene value indoors that you can outdoors.”

Bill: We do not.

Aaron: How did you settle on outdoor-only as the strategy for Maggie’s?

Bill: I believe outdoor is a premium flower. I think it has less impact on the earth. I think that there is a lot less pest mitigation than there is indoors, which makes it a healthier, cleaner product. You don’t have to mitigate the concentration of pests that you get in temperate climates of stagnant corners of greenhouses and buildings that you cultivate indoors. Therefore, you never get into the situations as often or as intensely, where you might have to really work hard at mitigating your pests. You can use the natural predator insects you can introduce and oftentimes they survive and they create their own climates and it’s a more natural, healthier product.

I don’t think that you can get anywhere near the terpene value indoors that you can outdoors. You just don’t have the value of the sun, which nothing compares to. You can hold up as many high wattage bulbs as you want and you don’t even pale to the sun and the effect that the sun has on the flower.

Aaron: What are some of the challenges of growing outdoors that you see frequently?

Bill: You have to be nimble. You can’t rely completely on a schedule. You’ve got to be able to shift around in your planting days and your harvest dates.

You’ve obviously got to be on your toes all the time for weather changes. Higher humidity years can tend to bring more insects or pests. Some years you’ve got higher winds than other years. This year, we had a snowstorm on September 9, which left nine inches of heavy wet snow on one of our farms. So, you’ve got to be nimble, very proactive and ready for those kinds of weather events that happen in very short notice.

Aaron: We mentioned Clean Green Certified® briefly. Can you explain more about the Clean Green certification and why that’s an important thing for you at Maggie’s?

Bill: The choice to become Clean Green Certified® was really an effort to validate the organic process that we have. We vetted out what we believe was and still is the premier, organic criteria certification endorsement in the market for cannabis. To this day, they really do an ethical, vetting-out process whereby if you fail the parts of any of the soils that are sent to federal-licensed labs, you do not get your endorsement. The owner of Clean Green also had a mother company that was an endorser of other agricultural products such as coffee, wheat and dairy.

Aaron: How would you compare Clean Green Certified® to USDA Organic?

Bill: Identical. When the federal government legalizes, we are poised to automatically convert to a USDA Organic certification and endorsement. The processes the founder and owner of Clean Green uses to test cannabis is the same process used to test other agricultural industries. For plants, he takes random samples of soils throughout a cultivation field and sends them to a federal-licensed lab where they test for impurities.

Aaron: Did you decide to get your Clean Green certification due to pulling from the market, or is this more something you decided to do internally as Maggie’s Farm?

Bill: I decided to do this internally. I wanted to be recognized for all of our organic efforts and I wanted to let people know that we have a safe product that doesn’t have synthetics in it. Even to this day, a lot of people in Colorado unlike the coastal states like maybe California are still pretty unaware of a Clean Green certification or even the fact that there is an organic process for cannabis or marijuana. So, it’s really just to let our customers know that there is value in a safe, healthy choice for them.

Aaron: What kind of products do you create at Maggie’s farm?

Bill: We grow flower. We are also a big producer of a very high-quality pre-roll. We are developing promoted products as well.

Aaron: Do you do fresh frozen?

Bill: We do some, yes.

Aaron: Are you selling direct to the dispensary or to manufacturers?

Bill: We finally had produced some excess. So, we started wholesaling flower this year and lots of high-quality shake for concentrates to concentrate makers. Our customer is typically a little more of a mature customer. I don’t want to say necessarily older, but I think we probably do hit a little bit of a higher, more experienced, health-conscious, connoisseur customer.

Aaron: Can you give me an idea of some of the regulatory challenges in Colorado that you’ve faced in the past or are facing today?

Bill: The perpetual change of regulation has been a challenge. Being a competent operator in cannabis means getting used to the change and having the resources to be nimble with compliance. We haven’t had common problems such as metals, mold or mildew issues. However, we have had some hardware issues, which required us to change cameras along with other technical intricacies.

Aaron: How many acres do you have?

Bill: We have about 30 acres of secured premise cultivation.

Aaron: Is that all managed in-house or sublet?

Bill: It’s all managed and operated exclusively by Maggie’s Farm.

Aaron: What’s next for Maggie’s Farm? What are you excited about?

Bill:  We want to continue to put a higher scale of a very healthy, quality, value flower out there and to be able to offer that to more states initially states that are within our region and eventually states across the US. Also, we will continue to do our best to meet the growing demand for healthier choices in general.

Aaron: Lastly, what are you personally interested in learning more about?

Bill: How we can continue to be as earth-conscious as we can be? How we can continue to look for ways to give back to our communities? How we can continue to operate as a view of made in the USA and to try to just support local regional and national products and vendors? Just how to be more aware and always look for opportunities for self-improvement.

Aaron: That concludes the interview, thank you Bill!

Flower-Side Chats Part 1: A Q&A with Sam Ghods, CEO of Connected

By Aaron Green
No Comments

Flower continues to be the dominant product category in US cannabis sales. In this “Flower-Side Chats” series of articles Green interviews integrated cannabis companies and flower brands that are bringing unique business models to the industry. Particular attention is focused on how these businesses navigate a rapidly changing landscape of regulatory, supply chain and consumer demand.

Connected is a vertically-integrated cannabis company based out of Sacramento, CA and one of the most sought-after brands in California and Arizona. Having formed as a legacy operation in 2009, Connected has created a cult-like following over more than a decade in business. According to BDS Analytics, Connected Cannabis and their acquired brand Alien Labs now boasts the highest wholesale flower price in any major legal market – their average indoor flower wholesale price is 2x the CA average – yet also has the highest flower retail revenue.

We spoke with Sam Ghods, CEO of Connected to learn more about his transition from tech to cannabis, how Connected thinks about product and his vision for future growth. Sam joined Connected in 2018 after getting to know the founders. Prior to Connected, Sam was a co-founder at Box where he stayed on for 3 years after their successful IPO.

Aaron Green: How did you get involved in the cannabis industry?

Sam Ghods: I originally came from the tech industry. I co-founded Box, a cloud sharing and storage company, in the mid 2000s with three other friends. We grew that from the four of us to eventually a multi-billion-dollar public offering in 2015. I stayed on a few more years after that until I took some time off trying to decide what I wanted to do next. I looked at a number of different industries and companies, but personally I always had a real passion for artisan and craft consumer goods. It’s a really big hobby of mine. Whether it’s going to Napa or learning about different kinds of premium consumer goods, I really had a deep love and never knew cannabis could be like that.

When I first met Caleb, the co-founder of Connected, he instantly got my attention by telling me that they had been selling out of their product in the volume of millions of dollars a year at more than two times what everybody else was selling for. That really piqued my interest because creating a product that has that level of consumer passion and demand is maybe the single hardest thing about building a consumer goods business. For them to have been so successful in what was a very difficult and gray market to operate in at the time – this was mid 2018 that I was speaking with him and he had been building this company since 2009 – is a really big challenge, and really impressive.

Sam Ghods, CEO of Connected

So, I started spending time with Caleb and the Connected team and learned a lot about the business. Everything I learned got me more interested and more excited. The way that they thought about the product, the way they treated it was with a reverence and level of sophistication I had no idea was possible.

I was so excited to just learn about the space. I mean, honestly, it feels like the internet in the 90’s- The sheer possibility and excitement. The only difference here is that the market already has existed for 100 years plus: the gray and underground markets for this product are actually phenomenally mature. And now we’re lifting up billions of dollars in commerce that’s already occurring and attempting to legalize all of it in one fell swoop, which creates such an interesting set of challenges.

I first got involved as an advisor on fundraising and strategy. And then a few months later, they were looking for a CEO and I joined full time as CEO in September 2018.

Aaron: What trends in the industry are you focused on?

Sam: It may seem basic, but I think product quality in the broader cannabis markets nationally and internationally is really underrated. Because of the extreme weight of the regulatory frameworks in so many different markets, it’s resulting in a lot of product being grown and sold just because it can be by the operators that are doing it. In many markets, they count the number of producers by the handful, instead of being measured in hundreds or thousands like in California or Oregon. And in that kind of environment, you’re not really having competition, and you’re not really able to see the quality that has existed in this category for years and years and years.

That’s one of the things that really sets us apart – the quality is first above all else, as well as the innovation and time that has gone into it, and not many existing brands in the legal market can say that. With some of the “premium” brands on the market, it would be comparable to just jumping into the wine industry one day and thinking that you can become a premium brand, without having any knowledge of the history of the product or the industry itself. At Connected, we have a team that’s been doing this for over a decade. We did a back of the envelope calculation: there’s over one thousand lifetime harvests between our team. We’ve also brought in specialists from Big Ag and other industries to complement that experience.

Cannabis is a very, very difficult plant to grow at a very high level. It’s much more like high-end wine or spirits than other fruit or produce. I think in the cannabis community, that’s extremely acknowledged, and appreciation for that is the reason we get by with the highest prices in the legal market. I think in the broader investor and financial community, this point hasn’t really hit home, because the limited license markets aren’t mature enough, and there isn’t enough competition in many of them.

Our focus is continuing to make the best product we can, which has fed and developed our brands [Connected and Alien Labs] into what they are today. That is our number one focus, and we think it’s pretty unique to the space of not just cultivating a great quality product, but also as far as breeding, pushing the bar higher and higher on what can be done with the genetics of the plant. 

Aaron: How do you think about choosing testing labs?

Sam: So, the number one criterion is responsibility and compliance. We must be completely confident that they’re testing accurately, safely and exactly to the specifications of the state. Then from there, it is really cultivating about a partnership. There’s a lot of nuance in the relationship with a testing lab. We note things like: Are they responsive? Are they sensitive to our needs in terms of either timelines or requirements we have? It does come down to timelines and costs to a certain extent, like who’s able to deliver the best service for the best cost, but it really is a partnership where you’re working together to deliver a great product. Reliability and consistency are big pieces as well.

Aaron: Industry estimates for illicit market activities are something like 60% of the California market. From your perspective, how do we fix that?

Sam: I think it probably comes down to funding for the efforts to discontinue those activities and opening up the barrier to entry, incentivizing “illegal” operators to make the investment in the cross-over. I think the most successful attempts to tamp it down was when there were initiatives that were well-orchestrated and well-funded, allowing for legacy growers to actually cross over to the “legal” industry. You can’t launch an industry with such an extreme amount of regulation, set a miles-high barrier to entry, and then penalize legacy growers for continuing their business as-is. If the illicit market continues to be fueled by rejection, you’re not going to achieve the tax revenue that you’re expecting to see, that we all want to see. There needs to be an attitude that every dollar put into transitioning illicit markets into regulated markets is returned many times over in tax revenue to the state’s citizens.

Aaron: So, I understand you sell wholesale. Do you sell direct to consumer?“Once they hit the shelves, we blow people away again, beyond their expectations of what they had before.”

Sam: We own and operate three retail stores, so we do sell direct to our consumers, but at this point the majority of our product is sold through third party dispensaries.

Aaron: Do you make fresh frozen?

Sam: We do. On the cultivation side we have indoor, mixed light and outdoor. We fresh freeze a portion of our outdoor harvest every year, and then we use that fresh frozen for our live resin products, for example, our recent live resin cartridge. It creates a vape experience really unlike any other because we are using our regular market-ready flower, but instead we’re taking that flower and actually extracting, not just using the distillate and mixing a batch of terpenes with it. We extract the entire plant’s content across the board, from cannabinoids to terpenoids and everything in between, and then you have our live resin cartridges.

Aaron: How do you think about brand identity and leveraging the brand to command higher prices?

Sam: The cycle we’ve effectively created is that every time we do a release of a new strain or a new batch or harvest, the quality is generally going up. That quality is released under our brands, and then the customer is able to associate that increase in quality and reputation with those brands. Then for our next launch, we have an even bigger platform to talk about the products and to ship and distribute and sell the products. Once they hit the shelves, we blow people away again, beyond their expectations of what they had before. That continuous cycle keeps fortifying the brand and fortifying the product. From our perspective the brand is built 100% on the quality of the product. The product will always be our highest priority and the brand will come downstream from that. 

Aaron: Tell me about Alien Labs.

Sam: Alien Labs was an acquisition. It was a company that had built their brand really successfully in the gray market through 2017 and Prop 215 in California and had an incredible level of quality, a really loyal and dedicated fan base, not to mention a tremendous Instagram presence and following, which is where 98% of cannabis marketing happens today. We really loved the spirit of what the founders were bringing to the table. In 2018, we decided basically to join forces with them and bring them on board, creating a partnership where they leverage our infrastructure and the systems and processes we’ve built, but still keep their way of cultivation and their product vision. To this day, Ted Lidie, one of the founders, continues as the lead brand director for Alien Labs.

Aaron: In what geographies do you currently operate?

Sam: Our primary offices and facilities are based out of Sacramento, California, but we have facilities throughout the state. Last year, for the first time we launched operations in a new state, Arizona. As you may know, you’re not allowed to take cannabis products across state lines at all, so if you want consistent product in multiple markets you really have no choice but to rebuild your entire infrastructure in each state you want to open up.

There are many brands that are expanding and launching in more markets more quickly, but they’re doing so by taking product that’s already existing and putting their brand name on it. That is something we’ve decided strategically that we will not do. We’ve spent years building a high level of trust with our customers, so we’re only going to put our brand name on products that are our genetics, our cultivation, our style, our quality of product. When we launched in Arizona, we did it with a facility that we leased and took over and now operate with our staff. We’re replicating the same exact product that you can get in California in Arizona, which is really exciting.

We launched just this past November, which has been incredibly successful. Our dispensary partner Harvest saw lines of dozens of people out the door.“We consider ourselves a flower company first and foremost, so for us, that was a very calculated strategic move.”

Aaron: Any new geographies on the horizon that you can talk about?

Sam: We’re constantly evaluating new opportunities. I don’t have anything particularly specific to announce right now, but I will say we look for states where we believe there’s a competitive environment where the product quality is going to really stand out and be appreciated.

Aaron: Do you notice any differences in consumer trends between California and Arizona that stand out?

Sam: Not too many yet. We don’t have a retail location in Arizona, so we don’t have as much direct contact. However, we have heard consistently that the Connected customer demographics – as you would imagine most interested in our product – are those looking for something special, unique, different and have a really superior quality to everything else out there. We ended up launching in Arizona with the highest price point for flower in the state, and we say that’s just the beginning. The market is still so young and immature, both nationally and internationally, that this category is going to develop into one that’s really taste-driven.

Aaron: What’s next in California?

Sam: Continued growth and product development. We want to keep blowing away our customers with more and more incredible products, different product types and categories. For example, the cartridges were a really big launch for us because we don’t really consider ourselves a vape company. We consider ourselves a flower company first and foremost, so for us, that was a very calculated strategic move. We were only going to launch the product if we could fully replicate what the consumer gets from the flower experience. We are very unlikely to ever release a distillate pen, for example.

Aaron: What are you personally interested in learning more about?

Sam: We, as a society, really don’t know very much about the cannabis plant. Pretty much all meaningful research around cannabis stopped in the early 1900’s with prohibition. In the meantime, we’ve performed millions of dollars of studies and research on almost every other plant that we grow commercially. We understand these plants extraordinarily well. Cannabis science is stuck back in agriculture of early 1900s. The most interesting conversations I have are around how the plant works, how it doesn’t work and the ways in which it is so different from all other plants with which we are familiar. Our head of cultivation comes from Driscolls, the largest berry company in the world, and even he is frequently surprised by the way the cannabis plant reacts to things that are commonly understood in other plants. So, the way the actual plant responds to different environments is truly fascinating and something I think we’ll be learning about for decades and decades to come.

Aaron: Okay, great. That concludes the interview. Thank you, Sam!

Learning from the First Wave Part 2: California’s Cannabis Supply Chain and Vertical Integration, with a Grain of Salt

By Todd Feldman
No Comments

Part One of this series took a look at how the regulated cannabis market can only be understood in relation to the previous medical market as well as the ongoing “traditional” market. Part Two of the series describes how regulation defines vertical integration in California cannabis, and conversely, how vertical integration can address some of the problems that the regulations create. But first:

A Grain of Salt

Take the conventional wisdom about vertical integration with a grain of salt. Expected benefits may not materialize under the current circumstances:

  • Overall, the business environment is highly challenging due to extensive regulation, over taxation, insufficient retail capacity and competition from the “traditional” market. As a result, integrating businesses upstream or downstream may mean capturing losses, not profits.
  • The three major types of cannabis activity span three major industrial sectors: raw materials (i.e., cultivation), manufacturing and service (distribution, testing and retail). As a result, a vertically integrated company needs to carry out very different types of activity, which require very different types of core competencies, equipment and facilities.
    • Developing core competencies is especially challenging because each of the major cannabis sectors is still evolving.
    • Realizing the benefits of vertical integration requires an additional core competency in cross-sector operations.

 Regulations Define the Supply Chain

California’s regulations define the cannabis supply chain by defining both the individual links (licensees) and the relationships between those links. Therefore, an understanding of vertical integration must be grounded in an understanding of the underlying regulatory definitions.

The regulatory definition of each link is extensive. For example, each licensee is tied to a specific facility, and must have its own procedures for production, inventory control, security, etc. When the links are strung together, this definition tends to preserve operational redundancies, and impede operational integration.

Overall, the relationships between the links are primarily defined in terms of preserving the chain of cannabis custody. On top of that, regulations define very specific (and very consequential) links between certain licenses, as discussed below.

A Taxonomy of Links

There are currently 26 types of cannabis license in California, 25 of which can be vertically integrated:

  • Cultivation – 14 licenses, including 4 sizes each for Indoor (up to 22,0000 sf), Mixed Light (up to 22,000 sf) and Outdoor (up to 1 acre), as well as Nursery and Processor (drying, trimming and packaging/labeling). Note that cultivation licenses are the only licenses that restrict the scale of activities.
  • Manufacturing5 licenses, including volatile extraction, non-volatile extraction, everything but extraction (i.e., infusion) and packaging/labeling.
  • Testing (Type 8), for testing cannabis according to state standards prior to sale. The owner of a testing license cannot own any other type of license.
  • Distribution (Type 11), acts as the gateway between cultivation and manufacturing on the one hand, and retail on the other. The distributor’s gateway status is entirely an artifact of regulation – cannabis must be officially tested before it is sold to a consumer, and only a distributor can order the official test. All products must stay in a “quarantine” area at the distributor until they pass testing. Products that fail testing must be destroyed if they cannot be remediated.
  • Transport (Type 13), which can move cannabis between licensees (with a narrow exception). This license does not allow for official testing.
  • Storefront Retail (Type 9), which is the best license to have, and the hardest one to get.
  • Delivery Retail (Type 10), for delivery services that are subject to the vagaries of software platforms and the intransigence of local authorities.
  • Microbusiness (Type 12), which allows the licensee to carry out cultivation (up to 10,000 square feet), non-volatile manufacturing, distribution and retail.
  • Event Organizer

Self-Distribution – A Case of Useful Integration

You may gather from the previous section that shoving a gratuitous and mandatory distributor into the middle of the supply chain creates problems for cultivators and manufacturers. Savvy operators solve this problem by getting a distribution license. This allows the cultivator or manufacturer to:

  • Pick the time and place for the testing of its cannabis products.
  • Avoid paying someone else for the storage of cannabis products as they await test results or purchase.
  • Reduce transport costs (particularly if the distributor is near the other operations).
  • Sell directly to retailers.

The bottom line is that vertical integration in California cannabis is useful as a means to an end, as opposed to an end in itself. Therefore, cannabis operators should carefully consider how vertical integration will benefit their core business before incurring the risks and expenses associated with an additional license.

This article is an opinion only and is not intended to be legal advice.

Learning from the First Wave Part 1: How Law Shapes the California Cannabis Industry

By Todd Feldman
No Comments

As a cannabis lawyer, I spend a lot of time thinking about the ways that regulations affect a cannabis company’s bottom line. Since I’m in California, the ways are many.

In late 2017 I became the chief compliance officer for an Oakland startup that carried out delivery, distribution, cultivation and six manufacturing operations. A big part of my job was preparing my company, along with several equity cannabis companies, for California’s First Wave of cannabis licenses.

For the most part, First Wave licensees came from California’s essentially unregulated medical cannabis market, and/or from California’s by-definition unregulated “traditional” market. When California began issuing licenses in January 2018, many First Wavers were unprepared because their businesses practices had evolved in an unregulated market. A big part of my job was to help them adapt to the new requirements. As a result, I saw the regulations, and the effects of regulations, in sharp relief.

Regulation touches virtually every aspect of the legal cannabis industry in California. So anyone who wants to understand the industry should have at least a basic understanding of how the regs work. I’m writing this series to lay that out, in broad strokes.

Some key points:

  • The regulated market must be understood in relation to the previous unregulated (medical) market as well as the ongoing traditional market.
  • Regs define the supply chain.
  • Regs are designed to ensure product safety and maximize tax revenue.
  • Many regulations mandate good business practices.
  • Local enforcement of building, health and safety codes tends to be zealous and costly.

A Tale of Three Markets

California’s regulated cannabis market can only be understood in relation to the medical market that preceded it, and in relation to the traditional market (illegal market) that continues to compete with it.

The Before Times

California’s legal medical cannabis market goes back to 1996, when the Compassionate Use Act passed by ballot measure. One fact that shaped the medical market was that it was never just medical – while it served bona fide patients, it also served as a Trojan horse for adult-use (recreational) purchasers.

Another fact that shaped the medical market was a near complete lack of regulation. On the seller’s side, you had to be organized as a collective. On the buyer’s side, you had to have a medical card. That was it.

Meanwhile, the cannabis supply chain was entirely unregulated. This tended to minimize production costs. It also meant that a patient visiting a dispensary had no way of verifying where the products had been made, or how.

The Regulated Times

Licensing under the Medical and Adult-Use Cannabis Regulation and Safety Act (the “Act”) began on January 1, 2018. It was the beginning of legal adult-use cannabis in California. It was also the beginning of the Regulated Times, as the Act and accompanying 300-plus pages of regulations transformed the legal cannabis market.

 For example:

  • The Act defines the cannabis supply chain (as a series of licensees).
  • Across the supply chain, the internal procedures of cannabis companies are subject to review by state agencies;
  • Cultivators and manufacturers cannot sell directly to a dispensary – they must go through a distributor;
  • All cannabis must be tested for potency and a long list of contaminants by a licensed testing laboratory before it may be sold to consumers;
  • And beginning in 2019, all licensees were required to participate in the California Cannabis Track and Trace (CCTT) program, which is designed to track all cannabis from seed to sale.

Just as importantly, the Act establishes a dual licensing system – that is to say, in order to operate, a cannabis company needs a local permit (or other authorization) as well as a state license. In fact, local authorization is a prerequisite for a state license. And your local jurisdiction will have its own rules for cannabis that apply in addition to the state rules, up to and including a ban on cannabis activities.

Needless to say, operating in the Regulated Times is a lot more complicated and expensive than it was during the Before Times.

Especially when you consider the taxes. For example, in the City of Los Angeles, sale of adult-use cannabis is taxed at 10%, which means that any adult-use purchase in L.A. gets a 34.5% markup:

  • 15% state cannabis excise tax, plus
  • 10% Los Angeles Adult Use Cannabis Sales tax, plus
  • 5% sales tax.

Note that the distributors must collect the excise tax from the retailer, so the 15% markup is not necessarily visible to the consumer. Similarly, consumers are generally unaware that there is a cultivation tax of $9.65 per ounce (or about $1.21 per eighth) of dried flower that the distributor has to collect from the cultivator.

Theoretically, all of this might be unproblematic if licensed retailers were only competing with each other. Which brings us to:

The Traditional Market

The traditional market is the illegal market, which is to say, the untaxed and unregulated market.

Legalization of adult-use cannabis was supposed to destroy the traditional market, but it hasn’t. As of early 2020, the traditional market was estimated to be 80% of the total cannabis market in California. This is not surprising, since the traditional market has the advantages of being untaxed and unregulated.

The traditional market has a pervasive negative effect on the legal market. For example, the traditional market tends to depress prices in the legal market and tends to attract talent away from the legal market. Some of these effects will be discussed in the following articles.

This article is an opinion only and is not intended to be legal advice.