Tag Archives: test

autoclave

10 Treatment Methods to Reduce Mold in Cannabis

By Ketch DeGabrielle
8 Comments
autoclave

As the operations manager at Los Sueños Farms, the largest outdoor cannabis farm in the country, I was tasked with the challenge of finding a yeast and mold remediation treatment method that would ensure safe and healthy cannabis for all of our customers while complying with stringent regulations.

While outdoor cannabis is not inherently moldy, outdoor farms are vulnerable to changing weather conditions. Wind transports spores, which can cause mold. Each spore is a colony forming unit if plated at a lab, even if not germinated in the final product. In other words, perfectly good cannabis can easily fail microbial testing with the presence of benign spores.

Fun Fact: one square centimeter of mold can produce over 2,065,000,000 spores.

If all of those landed on cannabis it would be enough to cause over 450 pounds of cannabis to fail testing, even if those spores remained ungerminated.

Photo credit: Steep Hill- a petri dish of mold growth from tested cannabis

It should also be known that almost every food item purchased in a store goes through some type of remediation method to be considered safe for sale. Cannabis is finally becoming a legitimized industry and we will see regulations that make cannabis production look more like food production each year.

Regulations in Colorado (as well as Nevada and Canada) require cannabis to have a total yeast and mold count (TYMC) of ≤ 10,000 colony forming units per gram. We needed a TYMC treatment method that was safe, reliable, efficient and suitable for a large-scale operation. Our main problem was the presence of fungal spores, not living, growing mold.

Below is a short list of the pros and cons of each treatment method I compiled after two years of research:

Autoclave: This is the same technology used to sterilize tattoo needles and medical equipment. Autoclave uses heat and pressure to kill living things. While extremely effective, readily available and fiscally reasonable, this method is time-consuming and cannot treat large batches. It also utilizes moisture, which increases mold risk. The final product may experience decarboxylation and a change in color, taste and smell.

Dry Heat: Placing cannabis in dry heat is a very inexpensive method that is effective at reducing mold and yeast. However, it totally ruins product unless you plan to extract it.

autoclave
An autoclave
Image: Tom Beatty, Flickr

Gamma Ray Radiation: By applying gamma ray radiation, microbial growth is reduced in plants without affecting potency. This is a very effective, fast and scalable method that doesn’t cause terpene loss or decarboxylation. However, it uses ionizing radiation that can create new chemical compounds not present before, some of which can be cancer-causing. The Department of Homeland Security will never allow U.S. cannabis farmers to use this method, as it relies on a radioactive isotope to create the gamma rays.

Gas Treatment: (Ozone, Propylene Oxide, Ethylene Oxide, Sulfur Dioxide) Treatment with gas is inexpensive, readily available and treats the entire product. Gas treatment is time consuming and must be handled carefully, as all of these gases are toxic to humans. Ozone is challenging to scale while PPO, EO and SO2 are very scalable. Gases require special facilities to apply and it’s important to note that gases such as PPO and EO are carcinogenic. These methods introduce chemicals to cannabis and can affect the end product by reducing terpenes, aroma and flavor.

Hydrogen Peroxide: Spraying cannabis plants with a hydrogen peroxide mixture can reduce yeast and mold. However, moisture is increased, which can cause otherwise benign spores to germinate. This method only treats the surface level of the plant and is not an effective remediation treatment. It also causes extreme oxidation, burning the cannabis and removing terpenes.

Microwave: This method is readily available for small-scale use and is non-chemical based and non-ionizing. However, it causes uneven heating, burning product, which is damaging to terpenes and greatly reduces quality. This method can also result in a loss of moisture. Microwave treatment is difficult to scale and is not optimal for large cultivators.

Radio Frequency: This method is organic, non-toxic, non-ionizing and non-chemical based. It is also scalable and effective; treatment time is very fast and it treats the entire product at once. There is no decarboxylation or potency loss with radio frequency treatment. Minimal moisture loss and terpene loss may result. This method has been proven by a decade of use in the food industry and will probably become the standard in large-scale treatment facilities.

Steam Treatment: Water vapor treatment is effective in other industries, scalable, organic and readily available. This method wets cannabis, introducing further mold risk, and only treats the product surface. It also uses heat, which can cause decarboxylation, and takes a long time to implement. This is not an effective method to reduce TYMC in cannabis, even though it works very well for other agricultural products

extraction equipment
Extraction can be an effective form of remediating contaminated cannabis

Extraction: Using supercritical gas such as butane, heptane, carbon dioxide or hexane in the cannabis extraction process is the only method of remediation approved by the Colorado Marijuana Enforcement Division and is guaranteed to kill almost everything. It’s also readily available and easy to access. However, this time-consuming method will change your final product into a concentrate instead of flower and usually constitutes a high profit loss.

UV Light: This is an inexpensive and readily available method that is limited in efficacy. UV light is only effective on certain organisms and does not work well for killing mold spores. It also only kills what the light is touching, unless ozone is captured from photolysis of oxygen near the UV lamp. It is time consuming and very difficult to scale.

After exhaustively testing and researching all treatment methods, we settled on radio frequency treatment as the best option. APEX, a radio frequency treatment machine created by Ziel, allowed us to treat 100 pounds of cannabis in an hour – a critical factor when harvesting 36,000 plants during the October harvest.

Nevada Testing Lab Licenses Suspended, Then Reinstated

By Aaron G. Biros
1 Comment

When Nevada legalized adult use sales this past summer, the market exploded and undoubtedly flooded licensed testing labs with samples to get products on shelves. In August, roughly a month after the start of adult use sales, a Las Vegas cannabis-testing lab, G3 Labs, had their license suspended for an unknown compliance issue.

“We can’t disclose the details of the suspension, including anything about penalties,” said Klapstein. “Under NRS 360.255, the information is confidential.”Then in late December, the Nevada Department of Taxation, one of the bodies tasked with regulating the state’s industry, announced in an email they suspended two more cannabis testing lab licenses. Certified Ag Lab in Sparks, Nevada and Cannex Nevada, LLC, in Las Vegas (also known as RSR Analytical Laboratories) both had their licenses suspended on December 22 and December 26 respectively.

Stephanie Klapstein, spokeswoman for the Department of Taxation, told the Reno Gazette Journal that both of those labs were not following proper protocols. “During separate, routine inspections, Department inspectors discovered that these two labs were not following proper lab procedures and good laboratory practices,” says Klapstein. “Their licenses were suspended until those deficiencies were corrected.”

According to the Reno Gazette Journal, both of those labs had their licenses reinstated and have since resumed normal business. During their license suspension, the labs were not allowed to operate and the department directed licensed cannabis businesses to submit samples to other labs. The department also directed the suspended labs in the email to coordinate with their clients who had samples in for testing; to either have their samples transferred to a different lab or a new sample taken for another lab to test. They did note that no product recalls were deemed necessary because of the suspension.

In that same email, the department directed licensed cannabis businesses to state-licensed labs in good standing, including 374 Labs, ACE Analytical Laboratory, DB Labs, Digipath Labs, MM Lab and NV CANN Lab. But on the department’s website, it says there are 11 licensed testing labs.

Back in September when we reported on the first lab license suspension, Klapstein told CIJ that under state law they couldn’t discuss any reasons behind why they suspended licenses. “We can’t disclose the details of the suspension, including anything about penalties,” said Klapstein. “Under NRS 360.255, the information is confidential.”

Because of that confidentiality, there are a number of questions left unanswered: With three lab licenses suspended in the first six months of the Nevada’s adult use market being open, how are testing labs keeping up with the market’s pace? What did those suspended labs do wrong? Do the regulations adequately protect public health and safety?

Sunrise Genetics Partners With RPC, Begins Genetic Testing in Canada

By Aaron G. Biros
No Comments

Sunrise Genetics, Inc., the parent company of Marigene and Hempgene, announced their partnership with New Brunswick Research & Productivity Council (RPC) this week, according to a press release. The company has been working in the United States for a few years now doing genomic sequencing and genetic research with headquarters based in Fort Collins, CO. This new partnership, compliant with Health Canada sample submission requirements, allows Canadian growers to submit plants for DNA extraction and genomic sequencing.

Sunrise Genetics researches different cannabis cultivars in the areas of target improvement of desired traits, accelerated breeding and expanding the knowledge base of cannabis genetics. One area they have been working on is genetic plant identification, which uses the plant’s DNA and modern genomics to create authentic, reproducible, commercial-ready strains.

Matt Gibbs, president of Sunrise Genetics, says he is very excited to get working on cannabis DNA testing in Canada. “RPC has a long track record of leadership in analytical services, especially as it relates to DNA and forensic work, giving Canadian growers their first real option to submit their plant samples for DNA extraction through proper legal channels,” says Gibbs. “The option to pursue genomic research on cannabis is now at Canadian cultivator’s fingertips.”

Canada’s massive new cannabis industry, which now has legal recreational and medical use, sales and cultivation, previously has not had many options for genetic testing. Using their genetic testing capabilities, they hope this partnership will better help Canadian cultivators easily apply genomic testing for improved plant development. “I’m looking forward to working with more Canadian cultivators and breeders; the opportunity to apply genomics to plant improvement is a win-win for customers seeking transparency about their Cannabis product and producers seeking customer retention through ‘best-in-class’ cannabis and protectable plant varieties,” says Gibbs. The partnership also ensures samples will follow the required submission process for analytical testing, but adding the service option of genetic testing so growers can find out more about their plants beyond the regular gamut of tests.

RPC is a New Brunswick provincial research organization (PRO), a research and technology organization (RTO) that offers R&D testing and technical services. With 130 scientists, engineers and technologists, RPC offers a wide variety of testing services, including air quality, analytical chemistry of cannabis, material testing and a large variety of pilot facilities for manufacturing research and development.

They have over 100 accreditations and certifications including an ISO 17025 scope from the Standards Council of Canada (SCC) and is ISO 9001:2008 certified. This genetic testing service for cannabis plants is the latest development in their repertoire of services. “This service builds on RPC’s established genetic strengths and complements the services we are currently offering the cannabis industry,” says Eric Cook, chief executive officer of RPC.

Total Yeast & Mold Count: What Cultivators & Business Owners Need to Know

By Parastoo Yaghmaee, PhD
2 Comments

Editor’s note: This article should serve as a foundation of knowledge for yeast and mold in cannabis. Beginning in January 2018, we will publish a series of articles focused entirely on yeast and mold, discussing topics such as TYMC testing, preventing yeast and mold in cultivation and treatment methods to reduce yeast and mold.


Cannabis stakeholders, including cultivators, extractors, brokers, distributors and consumers, have been active in the shadows for decades. With the legalization of recreational adult use in several states, and more on the way, safety of the distributed product is one of the main concerns for regulators and the public. Currently, Colorado1, Nevada and Canada2 require total yeast and mold count (TYMC) compliance testing to evaluate whether or not cannabis is safe for human consumption. As the cannabis industry matures, it is likely that TYMC or other stringent testing for yeast and mold will be adopted in the increasingly regulated medical and recreational markets.

The goal of this article is to provide general information on yeast and mold, and to explain why TYMC is an important indicator in determining cannabis safety.

Yeast & Mold

Photo credit: Steep Hill- a petri dish of mold growth from tested cannabis

Yeast and mold are members of the fungi family. Fungus, widespread in nature, can be found in the air, water, soil, vegetation and in decaying matter. The types of fungus found in different geographic regions vary based upon humidity, soil and other environmental conditions. In general, fungi can grow in a wide range of pH environments and temperatures, and can survive in harsh conditions that bacteria cannot. They are not able to produce their own food like plants, and survive by breaking down material from their surroundings into nutrients. Mold cannot thrive in an environment with limited oxygen, while yeast is able to grow with or without oxygen. Most molds, if grown for a long enough period, can be detected visually, while yeast growth is usually detected by off-flavor and fermentation.

Due to their versatility, it is rare to find a place or surface that is naturally free of fungi or their spores. Damp conditions, poor air quality and darker areas are inviting environments for yeast and mold growth.

Cannabis plants are grown in both indoor and outdoor conditions. Plants grown outdoors are exposed to wider ranges and larger populations of fungal species compared to indoor plants. However, factors such as improper watering, the type of soil and fertilizer and poor air circulation can all increase the chance of mold growth in indoor environments. Moreover, secondary contamination is a prevalent risk from human handling during harvest and trimming for both indoor and outdoor-grown cannabis. If humidity and temperature levels of drying and curing rooms are not carefully controlled, the final product could also easily develop fungi or their growth by-product.

 What is TYMC?

TYMC, or total yeast and mold count, is the number of colony forming units present per gram of product (CFU/g). A colony forming unit is the scientific means of counting and reporting the population of live bacteria or yeast and mold in a product. To determine the count, the cannabis sample is plated on a petri dish which is then incubated at a specific temperature for three to five days. During this time, the yeast and mold present will grow and reproduce. Each colony, which represents an individual or a group of yeast and mold, produces one spot on the petri dish. Each spot is considered one colony forming unit.

Why is TYMC Measured?

TYMC is an indicator of the overall cleanliness of the product’s life cycle: growing environment, processing conditions, material handling and storage facilities. Mold by itself is not considered “bad,” but having a high mold count, as measured by TYMC, is alarming and could be detrimental to both consumers and cultivators. 

Aspergillus species niger
Photo: Carlos de Paz, Flickr

The vast majority of mold and yeast present in the environment are indeed harmless, and even useful to humans. Some fungi are used commercially in production of fermented food, industrial alcohol, biodegradation of waste material and the production of antibiotics and enzymes, such as penicillin and proteases. However, certain fungi cause food spoilage and the production of mycotoxin, a fungal growth by-product that is toxic to humans and animals. Humans absorb mycotoxins through inhalation, skin contact and ingestion. Unfortunately, mycotoxins are very stable and withstand both freezing and cooking temperatures. One way to reduce mycotoxin levels in a product is to have a low TYMC.

Aspergillus flavus on culture.
Photo: Iqbal Osman, Flickr

Yeast and mold have been found to be prevalent in cannabis in both current and previous case studies. In a 2017 UC Davis study, 20 marijuana samples obtained from Northern California dispensaries were found to contain several yeast and mold species, including Cryptococcus, Mucor, Aspergillus fumigatus, Aspergillus niger, and Aspergillus flavus.3 The same results were reported in 1983, when marijuana samples collected from 14 cannabis smokers were analyzed. All of the above mold species in the 2017 study were present in 13 out of 14 marijuana samples.4

Aspergillus species niger, flavus, and fumigatus are known for aflatoxin production, a type of dangerous mycotoxin that can be lethal.5 Once a patient smokes and/or ingests cannabis with mold, the toxins and/or spores can thrive inside the lungs and body.6, 7 There are documented fatalities and complications in immunocompromised patients smoking cannabis with mold, including patients with HIV and other autoimmune diseases, as well as the elderly.8, 9, 10, 11

For this reason, regulations exist to limit the allowable TYMC counts for purposes of protecting consumer safety. At the time of writing this article, the acceptable limit for TYMC in cannabis plant material in Colorado, Nevada and Canada is ≤10,000 CFU/g. Washington state requires a mycotoxin test.12 California is looking into testing for specific Aspergillus species as a part of their requirement. As the cannabis industry continues to grow and advance, it is likely that additional states will adopt some form of TYMC testing into their regulatory testing requirements.

References:

  1. https://www.colorado.gov/pacific/sites/default/files/Complete%20Retail%20Marijuana%20Rules%20as%20of%20April%2014%202017.pdf
  2. http://laws-lois.justice.gc.ca/eng/acts/f-27/
  3. https://www.ucdmc.ucdavis.edu/publish/news/newsroom/11791
  4. Kagen SL, Kurup VP, Sohnle PG, Fink JN. 1983. Marijuana smoking and fungal sensitization. Journal of Allergy & Clinical Immunology. 71(4): 389-393.
  5. Centre for Disease control and prevention. 2004 Outbreak of Aflatoxin Poisoning – Eastern and central provinces, Kenya, Jan – July 2004. Morbidity and mortality weekly report.. Sep 3, 2004: 53(34): 790-793
  6. Cescon DW, Page AV, Richardson S, Moore MJ, Boerner S, Gold WL. 2008. Invasive pulmonary Aspergillosis associated with marijuana use in a man with colorectal cancer. Diagnosis in Oncology. 26(13): 2214-2215.
  7. Szyper-Kravits M, Lang R, Manor Y, Lahav M. 2001 Early invasive pulmonary aspergillosis in a leukemia patient linked to aspergillus contaminated marijuana smoking. Leukemia Lymphoma 42(6): 1433 – 1437.
  8. Verweii PE, Kerremans JJ, Voss A, F.G. Meis M. 2000. Fungal contamination of Tobacco and Marijuana. JAMA 2000 284(22): 2875.
  9. Ruchlemer R, Amit-Kohn M, Raveh D, Hanus L. 2015. Inhaled medicinal cannabis and the immunocompromised patient. Support Care Cancer. 23(3):819-822.
  10. McPartland JM, Pruitt PL. 1997. Medical Marijuana and its use by the immunocompromised. Alternative Therapies in Health and Medicine. 3 (3): 39-45.
  11. Hamadeh R, Ardehali A, Locksley RM, York MK. 1983. Fatal aspergillosis associated with smoking contaminated marijuana, in a marrow transplant recipient. Chest. 94(2): 432-433.
  12. http://apps.leg.wa.gov/wac/default.aspx?cite=314-55-102
amandarigdon

Proficiency Testing in the Cannabis Industry: An Inside Look

By Cannabis Industry Journal Staff
No Comments
amandarigdon

Cannabis Labs Virtual Conference: Part 4

Proficiency Testing in the Cannabis Industry: An Inside Look
By Amanda Rigdon, Chief Technical Officer, Emerald Scientific

This presentation covers specifics of different proficiency testing schemes available to the cannabis industry. Additionally, specific challenges facing both laboratories and PT providers in the cannabis industry will be addressed. Data relating to residual solvent and potency proficiency testing will be presented.

Ask The Expert: Exploring Cannabis Laboratory Accreditation Part 4

By Aaron G. Biros
No Comments

In the first part of this series, we spoke with Michelle Bradac, senior accreditation officer at A2LA, to learn the basics of cannabis laboratory accreditation. In the second part, we sat down with Roger Brauninger, A2LA Biosafety Program manager, to learn why states are looking to lab accreditation in their regulations for the cannabis industry. In the third part, we heard from Michael DeGregorio, chief executive officer of Konocti Analytics, Inc., discussing method development in the cannabis testing industry and his experience with getting accredited.

In the fourth and final part of this series, we sit down with Susan Audino, Ph.D., an A2LA lead assessor and instructor, laboratory consultant and board member for the Center for Research on Environmental Medicine in Maryland. Dr. Audino will share some insights into method validation and the most technical aspects of laboratory accreditation.

Susan Audino, Ph.D.

Susan Audino obtained her Ph.D. in Chemistry with an analytical chemistry major, physical and biochemistry minor areas. She currently owns and operates a consulting firm to service chemical and biological laboratories. Susan has been studying the chemistry and applications of cannabinoids and provides scientific and technical guidance to cannabis dispensaries, testing laboratories and medical personnel. Dr. Audino’s interest most directly involves cannabis consumer safety and protection, and promotes active research towards the development of official test methods specifically for the cannabis industry, and to advocate appropriate clinical research. In addition to serving on Expert Review Panels, she is also chairing the first Cannabis Advisory Panel and working group with AOAC International, is a member of the Executive Committee of the ASTM Cannabis Section and has consulted to numerous cannabis laboratories and state regulatory bodies.

CannabisIndustryJournal: What are the some of the most significant technical issues facing an accreditation body when assessing a cannabis-testing laboratory?

Susan: From the AB perspective, there needs to be a high level of expertise to evaluate the merits and scientific soundness of laboratory-developed analytical test methods. Because there are presently no standard or consensus test methods available, laboratories are required to develop their own methods, which need to be valid. Validating methods require a rigorous series of tests and statistical analyses to ensure the correctness and reliability of the laboratory’s product, which is– the test report.

CIJ: When is method validation required and how does this differ from system suitability?

Susan: Method validation is required whenever the laboratory modifies a currently accepted consensus or standard test method, or when the laboratory develops its own method. Method validation is characterized by a series of analytical performance criteria including determinations of accuracy, precision, linearity, specification, limit of detection, and limit of quantitation. The determination of system suitability requires a series of deliberate variations of parameters to ensure the complete system, that is all instrument(s) as well as the analytical method, is maintained throughout the entire analytical process. Traditionally, method validation has been referred to as “ruggedness” and system suitability as “robustness.”

CIJ: What are the most important aspects of method validation that must be taken into account? 

Susan: In keeping with the FDA guidelines and other accepted criteria, I tend to recommend the International Conference on Harmonization (ICH), particularly Q 2A, which is a widely recognized program that discusses the pertinent characteristics of method validation. This include: method specification, linearity, range, accuracy, and precision (e.g., repeatability, intermediate precision, reproducibility). As mentioned earlier, system suitability is also a critical element and although related to method validation, does require its own protocol.

CIJ: What three areas do you see the laboratory having the hardest time with in preparing for accreditation? 

Susan: My responses to this question assume the laboratory employs appropriate instruments to perform the necessary analyses, and that the laboratory employs personnel with experience and knowledge appropriate to develop test methods and interpret test results.

  • By and large, method validation that is not appropriate to the scope of their intended work. Driving this is an overall lack of information about method validation. Oftentimes there is an assumption that multiple recoveries of CRMs constitute “validation”. While it may be one element, this only demonstrates the instrument’s suitability. My recommendation is to utilize any one of a number of good single laboratory validation protocols. Options include, but are not limited to AOAC International, American Chemical Society, ASTM, and ICH protocols.
  • Second is the lack of statistically sound sampling protocols for those laboratories that are mandated by their governing states to go to the field to sample the product from required batches. Sampling protocols needs to address the heterogeneity of the plant, defining the batch, and determining/collecting a sample of sufficient quantity that will be both large enough and representative of the population, and to provide the laboratory an adequate amount from which to sub-sample.
  • Third, sample preparation. This is somewhat intertwined with my previous point. Once an appropriate sample has been collected, preparation must be relevant to the appropriate technology and assay. It is unlikely that a laboratory can perform a single preparation that is amenable to comprehensive testing.

Steep Hill Expands To Oregon

By Aaron G. Biros
1 Comment

Last week, Steep Hill announced they are expanding into Oregon with a laboratory in Portland. According to the press release, the company has licensed its testing technology to Dr. Carl Balog, a renowned pain and addiction physician.

Steep Hill has expanded significantly over the past year, including new laboratories in Pennsylvania, Maryland, Washington D.C. and Hawaii, among other states. The Berkeley-based company works in lab testing, research and development, licensing, genetics and remote testing. In 2008, Steep Hill opened the first-ever commercial cannabis-testing laboratory in the country.

Jmîchaeĺe Keller, president and chief executive officer of Steep Hill, says this is a development that will help them better understand cannabis chemistry and its medical applications. “We are pleased to announce our expansion into Oregon and especially pleased to partner with Dr. Balog, a physician who brings years of pain and addiction experience to the Steep Hill body of expertise,” says Keller. “In addition, Dr. Balog plans to use his specialized knowledge to aid Steep Hill’s research and development efforts to broaden our understanding of cannabis chemistry and to explore its wider medical applications. In partnering with Dr. Balog, we hope that Steep Hill will be able to help physicians around the United States to curb the opioid epidemic by offering Steep Hill Verified™ medicinal cannabis as an alternative to a crisis that plagues this country.”

Examination of cannabis prior to testing- credit Steep Hill Labs, Inc.

Dr. Balog, now owner and medical director of Steep Hill Oregon, says medical cannabis could be an excellent harm reduction tool, and hints at it being a possible tool in the opioid crisis. “I deal with the consequences of the opioid epidemic on a daily basis as a pain and addiction specialist,” says Dr. Balog. “The growing trend of using cannabis products as an alternative to opioids highlights the need for regulated testing. Because of the variability of marijuana preparations, testing ensures that scientific rigor is applied in a standardized way. I am dedicated to ensuring that patients have access to safe, tested cannabis, free from contaminants and to verified labels that can be trusted for their content.”

They expect Steep Hill Oregon to be open for business in the second quarter of 2018.

Using Cloud-Based LIMS To Improve Efficiency In Cannabis Labs

By Shonali Paul
No Comments

Cannabis testing laboratories around the country are expanding quickly, taking on new clients and growing their business incrementally. Many of these labs are receiving a large number of test requests from growers for potency testing, terpene profiling, pesticide screening, residual solvent screening, heavy metal testing, microbial analysis and even genetic testing. To keep pace with the number of test requests received, efficient data, sample and test management is imperative.

Considering the magnitude of cannabis testing, data management using spreadsheets is a serious impediment to quality assurance. Data being recorded in spreadsheets is error-prone and difficult to manage. Furthermore, using spreadsheets does not allow labs to adhere to regulatory guidelines that demand strict accounting for every gram of the sample, right from reception, consumption for testing, to disposal.

Log samples, keep track of Chain of Custody(CoC), track samples from initial location in the lab through disposal by recording location, custodians and other metadata

To overcome such data management challenges and improve the operational efficiency of cannabis testing laboratories, a Laboratory Information Management System (LIMS) plays a significant role. LIMS are much more capable than spreadsheets and paper-based tools for managing analytical and operational activities. LIMS enhances the productivity and quality by eliminating the manual data entry. With its built-in audit trail capability, LIMS helps labs adhere to regulatory standards.

LIMS can provide companies with a method to manage samples, records and test results, and ensures regulatory compliance by increasing traceability. LIMS can also be integrated with other lab instrumentation and enterprise systems, enabling easier transmission of information across the lab and the organization, reducing manual efforts and improving decision-making.

Account for the entire quantity of sample received, used and disposed

Multiple resources are also available to assist labs in preparing for quality assurance and accreditation, LIMS being one of them. LIMS can help cannabis labs with instrument integration, and automate reporting to help improve efficiencies and reduce errors. LIMS, such as CloudLIMS Lite, a cloud-based LIMS, automates cannabis-testing workflows right from sample collection, data recording, managing test chain of custody, sample weight accounting to report generation. With data security and audit trails, a LIMS provides traceable documentary evidence required to achieve ISO 17025 accreditation for highly regulated labs. Above all, cloud-enabled systems are often low in the total cost of acquisition, have maintenance outsourced, and are scalable to help meet the ever-changing business and regulatory compliance needs.

Incorporate all tests, instruments, sample information and result data (etc.) in one place

Cloud-based products are secure, easy to deploy and scalable. A cloud product is typically hosted on a server with a guaranteed uptime of 99.5%, allowing for a reliable system, accessible 24×7. Cloud-based LIMS have automatic data backup mechanism that allow for quick turnarounds in case of a server failure or in the eventuality of a natural disaster.

With LIMS in place, cannabis labs can manage sample and requisition-centric records, track sample quantity and location, integrate the test data, and provide online reports to clients. This in turn, reduces the turnaround time for testing and improves the operational efficiency. Besides, audit trail of each and every activity performed by the lab personnel is recorded in the system to ensure that the lab follows regulatory compliance.


Editor’s Note: This is a condensed version of a poster that was submitted and displayed at this year’s Cannabis Science Conference in Portland, Oregon. The authors of the original poster are Arun Apte, Stephen Goldman, Aditi Gade and Shonali Paul.

Quality Assurance In The Field: Instruments For Growers & Processors

By Aaron G. Biros
2 Comments

As the cannabis marketplace evolves, so does the technology. Cultivators are scaling up their production and commercial-scale operations are focusing more on quality. That greater attention to detail is leading growers, extractors and infused product manufacturers to use analytical chemistry as a quality control tool.

Previously, using analytical instrumentation, like mass spectrometry (MS) or gas chromatography (GC), required experience in the laboratory or with chromatography, a degree in chemistry or a deep understanding of analytical chemistry. This leaves the testing component to those that are competent enough and scientifically capable to use these complex instruments, like laboratory personnel, and that is still the case. As recent as less than two years ago, we began seeing instrument manufacturers making marketing claims that their instrument requires no experience in chromatography.

Instrument manufacturers are now competing in a new market: the instrument designed for quality assurance in the field. These instruments are more compact, lighter and easier to use than their counterparts in the lab. While they are no replacement for an accredited laboratory, manufacturers promise these instruments can give growers an accurate estimate for cannabinoid percentages. Let’s take a look at a few of these instruments designed and marketed for quality assurance in the field, specifically for cannabis producers.

Ellutia GC 200 Series

Shamanics, a cannabis extractor in Amsterdam, uses Ellutia’s 200 series for QA testing

Ellutia is an instrument manufacturer from the UK. They design and produce a range of gas chromatographs, GC accessories, software and consumables, most of which are designed for use in a laboratory. Andrew James, marketing director at Ellutia, says their instrument targeting this segment was originally designed for educational purposes. “The GC is compact in size and lightweight in stature with a full range of detectors,” says James. “This means not only is it portable and easy to access but also easy to use, which is why it was initially intended for the education market.”

Andrew James, marketing director at Ellutia

That original design for use in teaching, James says, is why cannabis producers might find it so user-friendly. “It offers equivalent performance to other GC’s meaning we can easily replace other GC’s performing the same analysis, but our customers can benefit from the lower space requirement, reduced energy bills, service costs and initial capital outlay,” says James. “This ensures the lowest possible cost of ownership, decreasing the cost per analysis and increasing profits on every sample analyzed.”

Shamanics, a cannabis oil extraction company based in Amsterdam, uses Ellutia’s 200 series for quality assurance in their products. According to Bart Roelfsema, co-founder of Shamanics, they have experienced a range of improvements in monitoring quality since they started using the 200 series. “It is very liberating to actually see what you are doing,” says Roelfsema. “If you are a grower, a manufacturer or a seller, it is always reassuring to see what you have and prove or improve on your quality.” Although testing isn’t commonplace in the Netherlands quite yet, the consumer demand is rising for tested products. “We also conduct terpene analysis and cannabinoid acid analysis,” says Roelfsema. “This is a very important aspect of the GC as now it is possible to methylate the sample and test for acids; and the 200 Series is very accurate, which is a huge benefit.” Roelfsema says being able to judge quality product and then relay that information to retail is helping them grow their business and stay ahead of the curve.

908 Devices G908 GC-HPMS

908 Devices, headquartered in Boston, is making a big splash in this new market with their modular G908 GC-HPMS. The company says they are “democratizing chemical analysis by way of mass spectrometry,” with their G908 device. That is a bold claim, but rather appropriate, given that MS used to be reserved strictly for the lab environment. According to Graham Shelver, Ph.D., commercial leader for Applied Markets at 908 Devices Inc., their company is making GC-HPMS readily available to users wanting to test cannabis products, who do not need to be trained analytical chemists.

The G908 device.

Shelver says they have made the hardware modular, letting the user service the device themselves. This, accompanied by simplified software, means you don’t need a Ph.D. to use it. “The “analyzer in a box” design philosophy behind the G908 GC-HPMS and the accompanying JetStream software has been to make using the entire system as straightforward as possible so that routine tasks such as mass axis calibration are reduced to simple single actions and sample injection to results reporting becomes a single button software operation,” says Shelver.

He also says while it is designed for use in the field, laboratories also use it to meet higher-than-usual demand. Both RM3 Labs in Colorado, and ProVerde in Massachusetts, use G908. “RM3’s main goal with the G908 is increased throughput and ProVerde has found it useful in adding an orthogonal and very rapid technique (GC-HPMS) to their suite of cannabis testing instruments,” says Shelver.

Orange Photonics LightLab Cannabis Analyzer

Orange Photonics’ LightLab Cannabis Analyzer

Dylan Wilks, a third generation spectroscopist, launched Orange Photonics with his team to produce analytical tools that are easy to use and can make data accessible where it has been historically absent, such as onsite testing within the cannabis space. According to Stephanie McArdle, president of Orange Photonics, the LightLab Cannabis Analyzer is based on the same principles as HPLC technology, combining liquid chromatography with spectroscopy. Unlike an HPLC however, LightLab is rugged, portable and they claim you do not need to be a chemist to use it.

“LightLab was developed to deliver accurate repeatable results for six primary cannabinoids, D9THC, THC-A, CBD, CBD-A, CBG-A and CBN,” says McArdle. “The sample prep is straightforward: Prepare a homogenous, representative sample, place a measured portion in the provided vial, introduce extraction solvent, input the sample into LightLab and eight minutes later you will have your potency information.” She says their goal is to ensure producers can get lab-grade results.

The hard plastic case is a unique feature of this instrument

McArdle also says the device is designed to test a wide range of samples, allowing growers, processors and infused product manufacturers to use it for quality assurance. “Extracts manufacturers use LightLab to limit loss- they accurately value trim purchases on the spot, they test throughout their extraction process including tests on spent material (raffinate) and of course the final product,” says McArdle. “Edibles manufacturers test the potency of their raw ingredients and check batch dosing. Cultivators use LightLab for strain selection, maturation monitoring, harvesting at peak and tinkering.”

Orange Photonics’ instrument also connects to devices via Wi-Fi and Bluetooth. McArdle says cannabis companies throughout the supply chain use it. “We aren’t trying to replace lab testing, but anyone making a cannabis product is shooting in the dark if they don’t have access to real time data about potency,” says McArdle.

Ask The Expert: Exploring Cannabis Laboratory Accreditation Part 1

By Aaron G. Biros
No Comments

Laboratories throughout the world and in a variety of industries get accredited to demonstrate their competency. In the cannabis industry, some states are beginning to require it and many labs get accredited even if their state doesn’t require it. So what does accreditation mean and why is it so important?

The International Organization for Standardization (ISO) is a standard-setting organization that works to promote industrial and commercial standards. The standards set by ISO are designed to help prove a product’s safety and quality to a certain minimum level.

The ISO/IEC 17025:2005 standard sets specific requirements to demonstrate the competence of a lab for carrying out tests. It essentially shows customers or regulators that a lab has the skills and scientific know-how to perform testing, certifying the lab is capable. Accreditation means certifying a lab to that standard and is synonymous with both quality and competence of an organization.

Michelle Bradac, senior accreditation officer at A2LA

The American Association for Laboratory Accreditation (A2LA), founded in 1978, is a non-profit, internationally recognized accreditation body in the United States that offers laboratory and laboratory-related accreditation services and training. They have worked in the cannabis industry to accredit a number of cannabis laboratories to the ISO/IEC 17025:2005 standard. In this series of articles, we sit down with experts from A2LA to learn more about cannabis lab accreditation, why it’s so important and some of the challenges labs face when seeking accreditation.

In the first part of this series, we sit down with Michelle Bradac, senior accreditation officer at A2LA, to learn the basics. Michelle earned a bachelor’s degree in Biology at Towson State University and then attended Hood College, earning a master’s certificate in Regulatory Compliance in Biomedical Science. She has worked at A2LA for eight years, assisting in the accreditation of food testing, environmental testing and cannabis testing laboratories to ISO/IEC 17025, as well as performing quality system assessments. She also facilitates a number of accreditation programs including Field Sampling Measurement Organizations, STAC (Air Emissions) and Cannabis Testing. Bradac is also a member of the ASTM Cannabis Working Group and the ACIL Cannabis Working Group.

In the next part of this series, we will hear about specific requirements in states, some of the benefits of using ISO/IEC 17025 and the influx of start-up or novice testing laboratories.

CannabisIndustryJournal: What is Laboratory Accreditation? 

Michelle Bradac: Laboratory accreditation is a formal means of determining and recognizing the technical competence of laboratories to perform specific types of testing, via the use of an independent third party accreditation body. It provides laboratory users a mechanism to identify and select reliable testing organizations. Use of ISO/IEC 17025 as a basis for laboratory accreditation is internationally recognized as THE conformity assessment standard to which laboratories are accredited; it is used in the USA by both Public (State, local, federal (FDA, USDA, CDC, DoD and EPA) and private laboratories for testing of foods & feeds, drugs, cosmetics, tobacco, natural products and cannabis (among other materials and products).

CIJ: How does laboratory accreditation benefit the cannabis testing laboratory? 

Michelle: It provides a framework for continuous improvement and self-correction where the cannabis testing laboratory data management system is independently reviewed and blinded sample Proficiency Testing is encouraged.

CIJ: How does laboratory accreditation benefit the medical cannabis recommending physician?

Michelle: The physician gains a greater degree of assurance that the material provided by the dispensary is what the label says it is. This is especially important in working with patients that are immunocompromised where heavy metals, residual solvents and harmful pesticides could have negative health consequences.

CIJ: How does the testing of medical cannabis by an accredited laboratory benefit the patient?

Michelle: The patient gains increased confidence that the label accurately reflects the potency and chemical properties of the product.

CIJ: What specific challenges does A2LA face in accrediting cannabis testing laboratories?

Michelle: Much of the typical infrastructure is lacking or only now being developed. This ranges from proficiency testing programs, Reference Material Producers, method development and sampling procedures. There is also difficulty in ensuring that laboratories are appropriately validating methods in states where cannabis product is not yet available.

CIJ: Why is A2LA the optimal choice for ensuring the quality and reliability of the results produced by medical marijuana testing laboratories?

Michelle: A2LA has by far the most experience as an accreditor of laboratories that perform testing of natural plant products. We have been performing assessments of and granting accreditation to these types of laboratories for over twenty years. This results in our staff and our assessor corps who are then able to provide valuable insight and technical sophistication that other accreditation bodies do not have. Specific to the cannabis industry, A2LA is also represented in all the major standards development organizations, tradeshows and industry groups; which strengthens our understanding of the industry and ability to assist our customers towards meeting their goal of obtaining accreditation.