Last week, on November 20, dispensaries in Massachusetts began selling cannabis to recreational consumers. The market was off to an obviously electric start, following the path of other states that legalized recreational cannabis. Consumers waited in long lines on opening day, more than two years after voters in the state legalized cannabis.
While this marks an important milestone as the first legal recreational cannabis sales began on the East Coast, regulators only approved two licensed dispensaries to begin operations on opening day. Those two retailers allowed to begin sales are Cultivate Holdings in Leicester and New England Treatment Access in Northampton.
The Cannabis Control Commission (CCC), the state’s regulatory body overseeing the new marketplace, received some criticism for taking more than a year to establish and implement regulations for the industry. In April of this year, regulators were just preparing the final rules.
It has taken them a fair amount of time to establish the regulatory framework, but much of the recent delays were due to a lack of laboratory licenses. Earlier in November, the CCC finally approved two laboratories for testing in the recreational market. Those two labs are MCR Labs LLC of Framingham and CDX Analytics LLC of Salem. With the labs approved for third-party independent testing in the recreational market, regulators began allowing retailers to open shortly after.
Shawn Collins, executive director for the CCC, told Boston 25 News that they are delivering on the voters’ requests to provide for a safe marketplace. “When Massachusetts voters legalized adult-use cannabis, they communicated a desire to purchase products that are safely regulated and properly tested,” says Collins. “The Commission has done scrupulous due diligence to make that vision a reality and ensure licensed independent testing labs maximize public health and public safety.”
Chris Martinez, co-founder and chief operating officer of EVIO Labs Florida
Fast-forward almost a year and EVIO Labs Florida is continuing their expansion in the state, now with locations in Broward County and Gainesville. “We are always looking at opportunities to better serve our clients and the patients of Florida,” says Martinez. “Opening Gainesville within a year of Davie was a goal we set for our team. We knew there was a need and opening Gainesville helped support the continued growth of FL medical marijuana program.” He says that between the two locations, they can now process upwards of 1,400 samples a day.
According to Martinez, much of that expanded throughput is thanks to their partnership with Shimadzu. “Our relationship with Shimadzu is very unique,” says Martinez. “Shimadzu instrumentation allows us to test in parts per billion for accuracy and sensitivity levels that empower us to see deep into the chemical makeup of these medicines. Operating in this space where speed and turnaround times are key, these instruments provide us with a platform to meet 24/48-hour deadlines.” They can now screen for contaminants such as pesticides, heavy metals, residual solvents, mycotoxins, aflatoxins and pathogens using instruments such as HPLC, GC-MS/MS, LC-MS/MS and ICP-MS, all provided by Shimadzu.
While Florida doesn’t currently have a final rule on testing thresholds, there are proposed regulations that would require independent lab testing for medical cannabis products. “Our clients are self-regulating at this time and in favor of the current proposed regulation,” says Martinez. “The proposed regulations will give Florida the most comprehensive and stringent testing regulation in the U.S. and arguably the world.”
For Martinez and the rest of the EVIO Labs Florida team, this is about protecting public health. “Our lab’s main focus is always first and foremost patient safety,” says Martinez. “As the market continues to grow, we continue to innovate through business intelligence software and other technologies to streamline the testing process for our customer’s.”
According to a press release published yesterday, Steep Hill Hawaii announced the opening of their second location on the Big Island. Their first location located on Oahu and operating for a little over a year, was the first cannabis-testing laboratory to be certified by the State of Hawaii Department of Health (HDOH). It’s also the first ISO/IEC 17025:2005 accredited cannabis testing lab in the state.
Owner and CEO of Steep Hill Hawaii, Dana Ciccone announced the second location yesterday. “”We are thrilled to open up our new location in Kailua Kona, Hawaii,” says Ciccone. “We have been working closely with the Department of Health and we look forward to working together with the large patient population and the two new dispensaries opening very soon.” Ciccone says with the new location they are focusing on quick turnaround times, good service and competitive prices.
According to Dr. Andrew Rosenstein, CEO of Steep Hill, they want to help provide safe medicine and quality testing to the Hawaii medical cannabis community. “In extending its services, Steep Hill Hawaii is committed to providing safe medicine and high quality testing to Hawaii’s patient community,” says Rosenstien. “Dana and the Steep Hill Hawaii team have worked hard to open up this new location and will continue to support cultivators and dispensaries in this emerging market.”
The Food Safety Consortium, taking place November 13-15 in Schaumburg, Illinois, will host a series of talks geared towards the cannabis industry this year. The newly launched Cannabis Quality Track features a number of panels and presentations designed to highlight the many intersections between food safety and cannabis.
The track will have presentations discussing food safety planning in cannabis manufacturing, HACCP, GMPs, regulatory compliance and supply chain issues among other areas. One particular topic of interest in the quality and safety of cannabis products is laboratory testing. At the event this year, leading laboratory accreditation bodies in the country will sit together on a panel titled Accreditation, Regulation & Certification: Cannabis Labs and Production.
Laboratories that are new to the industry and looking to get accredited should be aware of the new ISO/IEC 17025:2017 standard, which was released last year. According to Tracy Szerszen, labs that have already been accredited to the 2005 version will be required to transition to the 2017 version by November 29, 2020. “This can be done in conjunction with routine assessments scheduled in 2019 and 2020,” says Szerszen. “However, laboratories are cautioned to transition within a reasonable timeframe to avoid their 17025: 2005 certificate from lapsing prior to the transition deadline. Some of the changes to the standard include but are not limited to: the re-alignment of clauses similar to ISO 9001:2015 and other ISO industry standards, modifications to reporting and decision rules, the addition of risked based thinking and a new approach to managing complaints.” Szerszen, along with the other panelists, will go much more in-depth on changes to the new ISO 17025 and other topics during the panel at the Food Safety Consortium.
Some of the other topics the panel will discuss include:
ISO/IEC 17025 –what’s expected, benefits of accreditation, common deficiencies, updates to the new 17025 standard
Standards available for production facilities-GMPs & GFSI standards
How standards can be used to safeguard the quality of production and safety requirements
An open discussion with panelists from leading accreditation bodies on the state of cannabis lab testing
Christopher Gunning, life sciences accreditation manager with A2LA
According to Chris Gunning, many states are requiring accreditation to ISO/IEC 17025, the standard used throughout the world in many other high-profile industries such as the testing of food and pharmaceuticals, environmental testing, and biosafety testing. “In an industry where there are few standard methods, where one hears that you can ‘pay to play,’ and where there are ‘novice’ laboratories popping up with little experience in operating a testing laboratory, it is extremely important to have an experienced, independent, 3rd party accrediting body evaluating the laboratory,” says Gunning. “This process confirms their adherence to appropriate quality management system standards, standard methods or their own internally developed methods, and can verify that those methods produce valid results. Ultimately, the process of accreditation gives the public confidence that a testing laboratory is meeting their state’s requirements and therefore consumers have access to a quality product.” He says most states with legal cannabis recognize the need for product testing by a credentialed laboratory.
Lauren Maloney, food safety program accreditation manager, Perry Johnson Registrars Food Safety, Inc. (PJRFSI)
Another important topic that the panel will address is the role of food safety standards in the cannabis industry. Lauren Maloney says cannabis product manufacturers should consider GMP and HACCP certifications for their businesses. “Food safety is important to the cannabis industry because although individual states have mandated several food safety requirements there still considerable risks involved in the production of cannabis products,” says Lauren Maloney. “Consumers want the assurance that the cannabis products are safe and therefore should be treated like a food product. Because FDA does not have oversight of these production facilities, third party certification is essential to ensure these facilities implement a robust food safety system.”
77 laboratories from 18 states and two foreign countries participated in the bi-annual Emerald Test, an inter-laboratory comparison and proficiency testing (PT) program. The program is a tool for labs to demonstrate their competence to existing clients, potential customers, regulatory agencies and accreditation bodies.
Overall, the company shipped 314 PT samples, with the majority in a hemp or hemp oil matrix. According to the press release, the new PTs including potency in hemp oil, STEC, Aspergillus Mold and Mycotoxins attracted a good deal of labs. “Many laboratories have been regular participants which speaks volumes about their commitment to quality assurance, regulatory compliance, and consumer safety,” says Ken Groggel, director of Emerald Scientific’s proficiency testing program. “The collegial attitude of open communication and shared experience increases our knowledge and ensures continued success for all involved. Our goal is to establish an industry benchmark for cannabis testing while providing valuable feedback to each laboratory’s quality assurance system.”
This marks the first time the Emerald Test used two potency PTs- the original in solution and a new hemp oil matrix. “Of the 62 labs that participated in the Potency PT, 48 took the PT in solution with 47 receiving an Emerald Badge,” reads the press release. “Another 23 labs took the PT in hemp oil, with 22 awarded an Emerald Badge. Nine labs took both PTs.”
39 labs took PTs in APC, Total Coliform, E. coli, Enterobacteriaceae and Yeast/Mold and 38 of those received the badge. 45 reported results for Salmonella and 42 of them were able to correctly identify the contaminated sample. 12 labs took the Aspergillus Mold PT and 11 of them were awarded the badge. 24 participated in the pesticides PT and 19 of them met criteria for the badge, while four of them did not report results.
The press release noted that the pesticides and residual solvents in hemp oil PTs were some of the more challenging tests in the spring program. 43 labs reported results for the residual solvents in hemp oil PT and only 31 received badges. The terpenes in hemp oil PT was also a challenging test where 21 labs participated and only 11 received the badge, marking the lowest passing rate of all the PTs.
The advisory panel for The Emerald Test consists of chemists, accreditation providers, laboratory owners, and other industry experts to keep it representative of industry needs. “The Emerald Test is the most comprehensive testing program in the world for the cannabis industry, but as the market grows more testing will be needed,” says Groggel. “We intend to continue introducing new proficiency tests while expanding the menu of matrix choices in response to laboratory requests and regulatory requirements.”
According to the press release, their fall program is open for enrollment until today. Testing begins in mid-October.
According to the press release, the two organizations hope to promote “foundational standards for quality control testing and regulatory guidelines that promote product safety.” Both organizations will advocate for the adoption of industry standards they deem appropriate for recreational and medical cannabis as well as hemp testing in the United States.
Michael Bronstein, executive director of ATACH, says there is an urgent need for open-source consensus standards and standard test methods for cannabis testing. “In an industry that lacks standard test methods and where testing is such a crucial part of the regulatory landscape, the need for open-source consensus standards is especially significant,” says Bronstein. “The development and adoption of standard test methods for cannabis testing is essential in ensuring consistency between laboratories, encouraging uniformity in state testing regulation, and providing a safe and consistent product to consumers.”
The press release also states that A2LA and ATACH seek to “develop regulation and adopt industry standards with goals of advancing and professionalizing the industry.”
LabVantage Solutions, known in other testing industries as a leader in laboratory information management systems (LIMS), has launched their own cannabis-specific LIMS. Unveiled at the Cannabis Science Conference in Portland, OR, the purpose-built software is designed specifically for cannabis testing and certification.
Here are a few key highlights of their system, taken from the press release:
Available through perpetual licensing or SaaS
One platform for all tests, instruments, sample information, and results data, with option to embed ELN, LES, and other modules
Registers sample requests, including a portal for remote requests from growers and distributors
Fully audited sample lifecycle and audit trail
Certificates of Analysis customized for local regulatory requirements
Includes American Herbal Pharmacopoeia® tests for Cannabis Inforescense.
Bob Voelkner, vice president of sales and marketing
LabVantage says their system can support ISO/IEC 17025 compliance, ISO 9001:2015, 21 CFR Part 11 and Annex 11 and GLPs as well. According to Bob Voelkner, vice president of sales and marketing, it has a very open architecture as well as web services technology, which allows for integration with METRC and other traceability software platforms. “We know the testing methodologies these labs use, so the customer doesn’t have to create that from scratch,” says Voelkner. “This is meant to be out of the box and ready-to-use, so the customer can get up and running with minimal lag time.” LabVantage has actually been a provider of LIMS solutions for over 30 years and they serve a broad range of lab types.
A screenshot showing the details collected in a harvest lot
Voelkner says they’ve been working with clients at cannabis labs over the past few years to configure their LIMS for this space specifically. “The lab managers can modify workflows on their own without having to write code,” says Voelkner. “We have a well-established solution with a good track record, that’s been around for a while and is proven. Some other players that are brand new to the space may be new to LIMS and that may not be a good thing. We are a market leader in the global LIMS space with a proven product that is very well established and very powerful.” Voelkner adds that lab managers get to own their data, not LabVantage. “You own the data. It is your database and it is proprietary to you. It is yours to use as you see fit.”
Lab managers have the option to configure the system to adapt to new compliance issues themselves, or work with the LabVantage professional services team to build it out further. “This particular space is new and emerging, it is pretty dynamic — we see a lot of change happening,” says Voelkner. “We believe this space needs a highly flexible platform and this is a proven technology solution with a lot of configurability built into it.”
In the last four articles, I have outlined areas that impact your operations as they apply to laboratory quality programs. But this article will take a different path. It will focus on protecting your crop and brand along with any business that utilizes your crop, such as dispensaries or edible manufactures in the court of public opinion.
Now, the elephant in the room for cannabis companies is the difference between rules written by the state and their enforcement by the state. There are many anecdotal stories out there that can be used as case studies in identifying ways to protect your brand. Remember, consumers and the media caught them, not the regulators.
Cheating in the cannabis industry: growers, dispensaries, edibles manufactures, etc. This includes:
Finding laboratories that will produce results that the client wants (higher potency numbers)
Not testing for a particular contaminant that may be present in the cannabis product.
Selling failed crops on the gray or black market.
Claiming to regulators that the state rules are unclear and cannot be followed (e.g. So, give me another chance, officer)
So why should you be worried? Because, even if the state where you operate fails to enforce its own rules, the final end-user of your product will hold you accountable! If you produce any cannabis product and fail to consider these end-users, you will be found out in the court of public opinion by either the media or by the even more effective word of mouth (e.g. Social Media).
So, let’s take a look at some recent examples of these problems:
Each of these reports lists contamination by microbial stains or pesticides as being rampant within the California market whose products are used for medical or recreational use. Just imagine the monetary losses these cannabis businesses faced for their recalled cannabis product when they got caught. Remember, consumers and the media caught them, not the regulators.Institute a quality program in your business immediately.
How can you be caught? There are many different ways:
So, what should you do to produce an acceptable product and provide reasonable protection to your cannabis business? Institute a quality program in your business immediately. This quality program will include areas of quality assurance and quality control for at least these areas.
Growing
Processing or formulating
Shipping
Dispensing
Security
Training of staff
Laboratory services
Setting up and supporting these programs requires that your upper management impose both a rigorous training program and make employee compliance mandatory. Otherwise, your business will have an unreasonable risk of failure in the future.
Further information on preparing and instituting these types of quality assurance and quality control programs within your business can be found at the author’s website.
Can the laboratory accurately analyze sample products like my sample?
Can the laboratory reproduce the sample results for my type of sample?
Now let’s discuss the most important QC test that will protect your crop and business. That QC sample is the Matrix Sample. In the last article in this series, you were introduced to many QC samples. The Matrix Sample and Duplicate were some of them. Take a look back at Part 3 to familiarize yourself with the definitions.
The key factors of these QC sample types are:
Your sample is used to determine if the analysis used by the laboratory can extract the analyte that is being reported back to you. This is performed by the following steps:
Your sample is analyzed by the laboratory as received.
Then a sub-sample of your sample is spiked with a known concentration of the analyte you are looking for (e.g. pesticides, bacteria, organic chemicals, etc.).
The difference between the sample with and without a spike indicates whether the laboratory can even find the analyte of concern and whether the percent recovery is acceptable.
Examples of failures are from my experiences:
Laboratory 1 spiked a known amount of a pesticide into a wastewater matrix. (e.g. Silver into final treatment process water). The laboratory failed to recover any of the spiked silver. Therefore the laboratory results for these types of sample were not reporting any silver, but silver may be present. This is where laboratory results would be false negatives and the laboratory method may not work on the matrix (your sample) correctly. .
Laboratory 2 ran an analysis for a toxic compound (e.g. Cyanide in final waste treatment discharge). A known amount of cyanide was spiked into a matrix sample and 4 times the actual concentration of that cyanide spike was recovered. This is where laboratory results would be called false positives and the laboratory method may not work on the matrix (your sample) correctly.
Can the laboratory reproduce the results they reported to you?
The laboratory needs to repeat the matrix spike analysis to provide duplicate results. Then a comparison of the results from the first matrix spike with its duplicate results will show if the laboratory can duplicate their test on your sample.
If the original matrix spike result and the duplicate show good agreement (e.g. 20% relative percent difference or lower). Then you can be relatively sure that the result you obtained from the laboratory is true.
But, if the original matrix spike result and the duplicate do not show good agreement (e.g. greater than 20% relative percent difference). Then you can be sure that the result you obtained from the laboratory is not true and you should question the laboratory’s competence.
Now, the question is why a laboratory would not perform these matrix spike and duplicate QC samples? Well, the following may apply:
These matrix samples take too much time.
These matrix samples add a cost that the laboratory cannot recover.
These matrix samples are too difficult for the laboratory staff to perform.
Most importantly: Matrix samples show the laboratory cannot perform the analyses correctly on the matrix.
So, what types of cannabis matrices are out there? Some examples include bud, leaf, oils, extracts and edibles. Those are some of the matrices and each one has their own testing requirements. So, what should you require from your laboratory?
The laboratory must use your sample for both a matrix spike and a duplicate QC sample.
The percent recovery of both the matrix spike and the duplicate will be between 80% and 120%. If either of the QC samples fail, then you should be notified immediately and the samples reanalyzed.
If the relative percent difference between the matrix spike and the duplicate will be 20% or less. If the QC samples fail, then you should be notified immediately and the samples should be reanalyzed.
The impact of questionable laboratory results on your business with failing or absent matrix spike and the duplicate QC samples can be prevented. It is paramount that you hold the laboratory responsible to produce results that are representative of your sample matrix and that are true.
The next article will focus on how your business will develop a quality plan for your laboratory service provider with a specific focus on the California Code Of Regulations, Title 16, Division 42. Bureau Of Cannabis Control requirements.
The press release says this makes EVIO Labs Massachusetts one of only a few operating and accredited testing laboratories serving the state’s medical cannabis industry. With recreational sales coming shortly to the state, EVIO is preparing for a higher demand in their lab testing services. “We are very proud of all of the teams’ hard work that resulted in this advanced accreditation,” says James Kocis, lab director of EVIO Labs Massachusetts. “With the state-mandated laboratory regulations, EVIO upholds the high standards of testing and plays a pivotal role in ensuring consumer safety and confidence in the states burgeoning marijuana market.”
According to Adam Gouker, general manager at A2LA, EVIO Labs Massachusetts, based in Southborough, MA, is the first cannabis laboratory they accredited in the state. “A2LA is excited to expand our cannabis accreditation program into yet another state, promoting the value of independent third-party accreditation to support quality products in the industry,” says Gouker. “Having the opportunity to work with a prominent name in the industry such as EVIO Labs and assess their exceptional Massachusetts laboratory has been an additional bonus.”
According to the A2LA press release, by achieving ISO/IEC 17025 accreditation, EVIO Labs Massachusetts demonstrates that they “have management, quality and technical systems in place to ensure accurate and reliable analyses, as well as proper administrative processes to ensure that all aspects related to the sample, the analysis, and the reporting are standardized, measured, and monitored.” It also requires that personnel are competent to perform each analysis.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
While this marks an important milestone as the first legal recreational cannabis sales began on the East Coast, regulators only approved two licensed dispensaries to begin operations on opening day. Those two retailers allowed to begin sales are Cultivate Holdings in Leicester and New England Treatment Access in Northampton.
