Automated extraction equipment and technologies are rapidly becoming the standard in the extraction sector of the cannabis industry. Like most evolving industries, manual and operator driven processes are what starts an industry, but with explosive growth, demand for increased safety, efficiency and repeatability grows. Specifically within the cannabis industry, we’re noticing a rising demand for higher quality extracts and a safer, more repeatable environment for cannabinoid extraction. These are all reasons for the industry making a shift towards automated extraction equipment and technologies.
What Automation Looks Like in Cannabis Extraction
Automation in the cannabis industry doesn’t necessarily mean implementing robotics and creating operator-less facilities; It typically refers to automated process control. Traditional, older technologies are manual and operator-driven. This means the equipment operator is in control of all parameters of the process, which leads to inconsistencies throughout the process caused by human error. As the extraction process has many steps: ethanol holding, chilling, extraction agitation, extraction discharge, extraction solvent removal, particle filtration, semi saturated solution storage, and so much more that involves valves, pumps and controls between each piece of the process, it becomes difficult to control such a tedious process manually. When all of these processes are controlled and monitored using proper automation technology, facilities can safely ensure that each batch is run following the same process and parameters accordingly. This is critical for product consistency, a concern for manufacturers and many end-consumers. As the cannabis industry grows, matures and makes its way closer to federal legalization, product safety and consistency become a top-priority for everyone involved.
Greater Quality Control of End-Products
Automated extraction processes ensures that the same solvent ratios are used batch-to-batch
Consistency and repeatability are just as important for cannabis processors as they are for standard food or pharmaceutical processors. Deploying a manual process of equipment operating and monitoring leaves far too much room for human error, and doesn’t provide the level of control needed for the industry as it continues to progress toward stricter product regulations and requirements. On the other hand, an automated extraction process ensures that the same solvent ratios are used batch-to-batch, the same extraction temperatures and recipe parameters are implemented, the same pump and process flow rates are deployed, and all processes are repeatable, predictable and scalable while producing a safe, consistent product.
Fewer Bottlenecks
The benefits of automated extraction are directly tied to establishing greater efficiency in processes. Efficiency can be experienced via less scrap product from unmanaged batches and/or less labor to operate and control the process. Automation means allowing a recipe-driven control system monitor and control the process, eliminating process bottlenecks that have been notorious for destroying productivity in manual extraction operations.
As Cannabis Extraction Processes Become Automated, They Become Safer.
automated extraction process ensures that the same solvent ratios are used batch-to-batch
A team is what drives any business forward. The safety of that team needs to be a top priority for any business leader. As cannabis extraction processes become automated, they become safer. With less equipment interaction, the likelihood for human error that could lead to safety hazards significantly decreases. Properly programmed automation can establish advanced system interlocks that check multiple points throughout the process for irregularities, and can halt a machine based on these irregularities it detects. That level of process monitoring and control is only available when automation and PLC logic controls equipment.
Data Collection and Validation
When we tie all the benefits of extraction automation together, it makes for a far more attractive system than traditional,manual processes that we’re used to seeing in the cannabis industry. In addition to the major benefits listed above, automation gives a superior level of data collection for process improvements and process validation which is key in cGMP or EU-GPM facilities. This is the future for every processing facility in the arena of cannabis. As the industry matures, it will continue to become more competitive. Facilities with automation will have the capacity to maximize their process efficiencies, produce a far superior and more consistent end–product and will have a competitive advantage in the extraction sector.
As state legalization measures begin to legitimatize the US cannabis industry, stakeholders, both those currently in the industry and those who plan to join in the not-too-distant future, grapple with the best ways to right the wrongs from the decades-old War on Drugs. While some stakeholders support residency requirements and setting aside a percentage of a state’s cannabis licenses for social equity and economic empowerment applicants, others contend that these solutions are discriminatory. Reuters reports that lawsuits against social equity programs have been filed in Michigan, Illinois, Missouri and Maine, and some have received decisions that rule against existing social equity programs. While there is disagreement on the best way to create an equitable cannabis industry, few dispute that we’re dealing with an oppressive legacy against low-income individuals and people of color and the cannabis industry is in a unique position to shape a socially responsible industry that focuses not just on profits, but also on the greater good.
Challenges for Social Equity Applicants and Licensees
Currently, Black Americans make up 13% of the US national population, but own less than two percent of cannabis businesses owners, according to Leafly’s Jobs Report 2021. Why? There are five primary factors.
In most states, cannabis licenses are expensive and difficult to get. The application process requires a team of experienced individuals to work on everything from finding and negotiating real estate contracts; to vetting and hiring architects, safety, and security consultants; to working with community stakeholders to gain local approval.
After the pieces are in place, applicants have to write it all down, which is a challenge in itself. It is not uncommon for one state cannabis application to be over one hundred pages.
Since cannabis is still federally illegal and listed as a Schedule 1 drug, it’s nearly impossible to get a business loan to fund the application process or, if an individual is lucky enough to get a provisional license, to renovate or build out cannabis cultivation, processing and/or retail facilities.
Because of the low-income status of many social equity applicants, few have access to accredited investors or low interest loans.
Finally, if an individual or organization makes it through the application process and receives both a license and funding to operate, they face ongoing operational challenges including ever-changing laws, rules and regulations. Maintaining compliance is a process in and of itself.
If cannabis industry stakeholders don’t make honest efforts to provide real solutions to these challenges in the near future, inequalities will proliferate.
Current State of Social Equity in the US Cannabis Industry
To help mend the harms of the War on Drugs and reduce the institutional challenges faced by marginalized individuals, some states have instituted social equity programs that prioritize cannabis business licenses to those previously incarcerated on cannabis-related convictions and/or those who live in zip codes with high incarceration rates for drug crimes. Some states broaden the social equity lens and include women- and veteran-owned businesses in social equity programs.
The goal of social equity laws is to ensure that people from communities disproportionately harmed by marijuana prohibition and discriminatory law enforcement are included in the new legal marijuana industry. Policymakers are working to address criticisms that outsiders are setting up legal cannabis businesses and profiting by doing the same things their less fortunate neighbors were arrested and given jail time for just a few years ago.
By prioritizing social equity applicants, our industry is starting to bridge the access gap and improve the odds that previously marginalized individuals will make it into the C-suite and other influential positions. But is it enough? Many argue that social equity programs won’t make a real difference until more programs include low-interest loans and/or provide access to capital sources and ongoing support after licensure.
Although social equity programs vary, many require applicants to live in a zip code with a high incarceration rate for drug crimes or have a state residency requirement, meaning that social equity applicants must have lived in the state for an established number of years before they can qualify for social equity status. In some states, municipalities are tasked with creating these programs as is the case in Los Angeles and Oakland, California.
While some states offer social equity applicants priority consideration for their licensing applications, others offer reduced application and licensing fees, technical assistance, entry into an incubator program specifically designed for social equity applicants and/or apprenticeship opportunities.
Although social equity programs focus on developing business leaders with marginalized racial and socioeconomic backgrounds, other components of these programs often include criminal justice reform, such as revising resentencing guidelines and expungement requirements for those with cannabis-related convictions. The MORE Act, for example, not only calls for federal legalization, but also for reassessing the legal status of cannabis-related convictions, arrests, and prison sentences.
US States with Cannabis Social Equity Programs
When Colorado and Washington voted in favor of adult-use cannabis legalization nearly a decade ago, lawmakers were tasked with drafting regulations for what a legal marketplace would look like in their respective states. Although legalization efforts focused on the inequities of prohibition, the War on Drugs, and the legal cannabis industry, social justice initiatives were not initially included.
Out of the 19 states with adult-use cannabis, 13 have developed social equity programs to help marginalized people become cannabis leaders in their markets. States that incorporated social equity programs into initial adult-use cannabis legislation include Massachusetts, California, New Jersey, New York, New Mexico, Michigan, Vermont, Illinois, Connecticut, Arizona and Virginia. Although Colorado and Washington’s laws initially did not include social equity programs, both states are now in the process of implementing them.
It’s important to note that not all US states with legal cannabis programs take the social equity approach. States with legal adult-use programs but without social equity programs include Montana, South Dakota, Maine, Nevada, Oregon and Alaska.
After Social Equity Licensure
For those social equity applicants who receive operational licensure, there is the ongoing issue of compliance. As if there were not enough pressure on social equity applicants and license holders, maintaining state-compliant businesses and developing internal policies and procedures that drive brand awareness and loyalty can be a challenge. The hard reality is that admission into a social equity program and even obtaining licensure does not ensure a business leader’s success. Besides increased access to capital, expanding social equity programs to include post-licensure support, at least for the first year or two, would improve the odds of long-term success.
All in all, social equity programs in the US cannabis industry have begun to make a difference and right some of the wrongs of the War on Drugs, but there is still work to be done. To build an industry that improves lives not only with cannabis products but also with financial opportunity, we must continue to prioritize and expand current social equity programs and fight for new social equity programs in all legal cannabis states.
As a fast-growing cannabis company, ensuring your business stays compliant with regulatory agencies of all kinds—planning departments, the U.S. Department of Agriculture (USDA), Occupational Health and Safety Administration (OSHA) and so on—is critical for survival. But is your business also compliant with temporary and part-time employment regulations? Violating these often-overlooked regulations can land your company in hot water at best and force you to shut your doors at worst. Here’s what you need to know about risks, regulations, compliance issues and more.
The 30,000-Foot View: Part-Time and Temporary Employees
Cannabis has proven itself to be a high-turnover industry. But in the ever-shifting, post-COVID landscape, many cannabis employers are seeing the financial and logistical benefits of hiring part-time and temporary workers.
Though the terms “part-time” and “temporary” are sometimes used interchangeably, the fact is, there are legal differences in the definitions of part-time versus temporary work. For starters, temporary employees must work for less than a year at a specific organization, and their work must have a defined end date. Temporary employees, or “temps,” often fill vacant roles in a temporary capacity, such as roles previously occupied by someone on parental leave.
Many full-time employees in the cultivation space are defined as “agricultural workers”
Part-time employees, on the other hand, can work indefinitely for a company—but they must work less than 40 hours per week. And, side note, if a part-time employee works more than 1,000 hours in a calendar year, they could be eligible for retirement benefits—so hiring managers, bear that in mind.
For employers, there are some tangible benefits in hiring part-time or temporary workers. For starters, there are often fewer upfront costs associated with hiring part-time workers (like workers’ compensation and healthcare). Establishing a strong part-time and temp employment strategy also allows for employers to quickly scale up or down based on market tendencies or shifts.
Understanding the Risks of Hiring Part-Time or Temporary Workers
While hiring part-time and temporary workers can help businesses stay agile and responsive to market demands or fill vacancies created by recent resignations, many businesses hire these types of employees without a full understanding of associated regulations. And it can get even trickier: many full-time cannabis industry workers in the cultivation space aren’t considered “employees” at all—they’re defined by the federal government as “agricultural workers.”
It’s essential that businesses classify part-time workers and independent contractors correctly. Attempting to claim a worker is part-time when they’re really a full-time employee (a practice known as “misclassification”) can save a business tax dollars in the short-term but lead to sanctions and hefty penalties down the line. For example, if a worker is misclassified and the Department of Industrial Relations finds out, they can sue the former employer for unpaid wages.
Potential fallout from noncompliance with classification or wage and hour issues includes massive fines, potential litigation and more. Federal agencies are extremely sensitive to cannabis business regulatory violations, it’s vital to adhere to proper staffing regulations and compliance. The wrong kind of attention can tank your business’s reputation and halt your operations altogether. I’ve personally worked with numerous cannabis businesses in their hiring and payroll initiatives, and I’ll say this: It may seem like a headache to cross all the “Ts” and dot all the “Is” in the beginning, but it will make a massive difference down the line.
Understanding the Regulations for Hiring Part-Time or Temporary Workers
All employers must adhere to the regulations set forth by the Fair Labor Standards Act, which mandates that part-time employees must be treated the same as full-time employees. That means they must be paid minimum wage, be paid overtime should they exceed their determined hours, have the opportunity to take job-protected unpaid leave, and so on. I really want to stress how essential it is that employers classify their workers appropriately.
It’s also worth noting that many states have specific regulatory structures for employment, both full- and part-time.
In the heavily regulated cannabis industry, employers must exercise strict due diligence to meet all OSHA standards. Additionally, they must identify all occupational hazards and account for employees’ overtime and double time. Grow operations must also adhere to the Field Sanitation Provisions of the Occupational Safety and Health Act, which includes providing toilets, drinking water, hand sanitation facilities and hygiene information.
Avoiding Compliance Problems with Planning and Diligence
There’s a lot more to hiring workers than businesses realize, especially in cannabis. Most companies don’t intend to be noncompliant with regulations—they simply don’t know the regulations, or they’re overwhelmed by hiring and growing so quickly. To make sure you’re compliant, you might consider building out your HR team, educating yourself as the business leader and reaching out to staffing and HR professionals in the space who can answer your questions. In this rapidly growing industry, which seems to shift and change every day, planting your feet firmly on solid regulatory ground will serve to benefit you in the event of federal legalization, massive business growth or initiatives you may want to undertake in the future.
Lean management or Lean thinking is a process for continuous improvement that can be applied to any business. Most frequently Lean is attributed to the manufacturing sector due to its origins in Japan at the Toyota Motor Company. Lean originated in post-war Japan where resources were scarce as the country rebuilt itself after World War II. The scarcity of resources forced the Japanese to do more with less which manifested itself within the Toyota organization as the Toyota Production System from which Lean originated.
Today, Lean thinking is being applied to every industry and we believe that the cannabis industry, and in particular laboratories, can benefit tremendously from its principals.
What Is Lean and How Does it Apply to Cannabis?
Lean thinking is a set of powerful tools for any business or organization that wants to be the best in their industry and deliver superior value their customers. This is especially relevant to the fast-growing cannabis and hemp testing industry where customers demand fast turnaround times and error-free results.
The reason that Lean applies to all businesses and especially the cannabis industry is because of its focus is on eliminating waste. Waste comes in many forms including defects, waiting time, extra motion, excess inventory, transportation, over production, over processing and underutilized talent.
Companies that adopt Lean management eliminate waste using a wide variety of tools that help surface issues and eliminate the root causes. When companies eliminate waste, they simultaneously improve both their speed and quality, two attributes that customers really care about. Given the fast-changing nature of the cannabis industry and differences state by state, we believe that using Lean thinking to eliminate waste is critical to being a top performing business in the cannabis industry.
One important tool that many businesses begin with is known as 5S or 6S. At our laboratory we recently implemented 6S to organize both our office and laboratory spaces. 6S is a process improvement tool that stands for Sort, Set in Order, Shine, Standardize, Sustain and Safety. The process involves each technician or analyst assessing their areas and asking critical questions such as: Can I easily reach everything I need for this test or process? Is there wasted motion due to the placement of items within the lab? Can I easily tell how much consumable inventory I have on hand at a glance?
This process also helps improve safety because the workspace is better organized, easier to navigate and designed with safety in mind. Each person is responsible for maintaining their workspace and regular audits by rotating teammates, helping drive continuous improvement to our 6S. It is a fundamental process for any business starting to adopt Lean thinking.
Another very helpful process that any cannabis business can implement is the Gemba walk. Gemba is the Japanese word for “actual place” and refers to the place in a business where value is created for the customer. Value in our cannabis business is created in our testing lab. By improving everything in our testing lab we improve our quality and speed for our customers. In our laboratory we begin the Gemba walk as a team reviewing our key performance indicators (KPIs). From there, the management team visits each station to review additional KPIs and discuss any issues that group may be having. We try to surface issues, however small they may be, so that they are solved and hopefully eliminated. This process is key to helping us keep a pulse on the lab, engaging employees and better understand the improvements that need to be made.
How to Implement Lean Processes
Without quality results, a testing laboratory does not really have a product or service to offer
Lean thinking is a very accessible set of tools. Unfortunately, it is quite difficult to implement because of the dedication that it requires. Implementing Lean and changing the culture requires a significant amount of time, investment in training and management commitment. Time and capital for training can be scarce at some businesses in the cannabis industry. For the businesses with capital, it is extremely important that management commit to implementing Lean and changing their culture. Without the support of the executive team most businesses stop implementing new procedures and revert to how they are used to operating. It is also common for changes in management to result in lean becoming deprioritized in place of a new initiative.
If the executive team is inexperienced in Lean management, it will be important to find a Lean consultant that can guide the training and events. A Lean consultant should be able to provide you with thorough training on each tool and help your business implement them in real time to improve the business. The training and knowledge gained during these events are extremely valuable and practical tools that every employee can use.
Results From Implementing a Lean Organization
If a business is able to successfully implement Lean management the results for their customers can be dramatic. In the laboratory setting, turnaround times will be reduced, and more importantly, will remain consistent despite fluctuations in sample volume. Faster turnaround times for cannabis companies means that they can bring inventory to market faster which can be critical for supply constrained businesses.
Additionally, implementing Lean helps reduce the number of errors, rework and retests so the quality of the results for the customer is dramatically improved. Root cause issues are solved, processes are updated and then shared with the entire team so that everyone can learn and benefit from the improvement. Without quality results, a testing laboratory does not really have a product or service to offer so it is critical to get it right every time.
All areas of the cannabis industry are becoming more competitive, and it is important for every business to make sure they can stay competitive considering changing market dynamics. Lean management has helped businesses in other industries stand apart from the rest and we believe that the cannabis industry will be no different. Academic literature has studied and documented the positive impact that Lean has on businesses globally. Lean management has repeatedly shown that businesses that can truly implement Lean thinking in everything that they do will have an inherent advantage because they’ll be faster, more agile, higher quality, more efficient and focused entirely on creating value for their customer.
Vaping is a multi-billion dollar cannabis product category representing more than 20% category share in the US, according to a recent Headset.io report. The 2019 vaping crisis, whereby lung injury and several deaths were caused by the adulteration of vapor pen cartridges with vitamin E acetate, highlighted the importance of safety and emissions testing for vapor pen products. In addition to volatile organic compounds, metals and ceramics contained in the heating elements of cartridges are also a concern. While the FDA has a robust program for emissions testing in nicotine products, they do not currently regulate cannabis. Cannabis vaping is currently regulated at the state level in the United States.
Cannabis vaping is popular among minors owing to its discrete nature. In a recent study published in the Journal of the American Medical Association (JAMA), 14.7% of teens reported vaping cannabis in 2018. In a separate research study, University of Michigan researchers found that teens vaping cannabis were two times more likely to experience respiratory issues than teens who smoked e-cigarettes.
We spoke with Corey Mangold, CEO and founder of PurTec Delivery Systems, to learn more about cannabis vaping safety and their PurGuard technology. Prior to entering the cannabis space, Corey founded a software company in 1998. He also founded the advertising agency Gigasavvy in 2008, which he recently exited from in March 2021.
Aaron Green: How did you get started in the cannabis industry?
Corey Mangold: I got started in the cannabis industry in 2016. My daughter was away at college in San Luis Obispo and got pregnant and was going to have a baby, which obviously I was excited about. I decided to have her come down to Southern California and start a company together, as I’ve done multiple times in my career successfully. I wanted to show her the ropes, and teach her everything from finance to HR, to business development, marketing – everything it takes to be successful – and give her the tools that she would need to be successful for her life.
Green: What kind of things were you into before 2016?
Mangold: I founded my first company in 1998 in the software industry and had that company up until 2005. In 2008 I started another company called Gigasavvy, a nationally recognized advertising agency out of Irvine, California, which I successfully exited in March of 2021.
Corey Mangold, CEO and founder of PurTec Delivery Systems
When deciding to start a company with my daughter, we were interested in the cannabis industry – I think everybody was back in 2016. In 2016, I had started using cannabis again after probably about a 16- or 17-year hiatus. I was using a vape because I had children in the house. I went to literally anywhere I could and bought every type of cartridge on the market. What I found was that their user experience was not like what it was on the nicotine side of vaping. I reached out to associates of mine who had been manufacturing vapes since 2011, starting with the blue e-cigarette, and we engineered a unique device that was proprietary and completely unlike anything on the market. It was incredible, and still to this day, I think it’s probably the best 510 thread cart on the market. We launched that under the Orchid Essentials (CNSX: ORCD, OTC:ORVRF) brand in California and Oregon.
Green: Is that cart something that you sell to other brands as well, or is it purely for the Orchid brand?
Mangold: Yes, purely for the Orchid brand, but it’s what inspired me to start PurTec Delivery Systems. After a few years of struggling in this industry because we didn’t have the access to capital needed – Orchid is a US company traded on the Canadian Stock Exchange (CSE:ORCD, OTC:ORVRF) – and dealing in a substance that’s federally illegal, there was no access to any traditional financing, be it factoring or inventory financing. We were literally creating as much product as we could every month and then selling out almost instantly, and then waiting till the next month to get money in from all our accounts to make more. We had to slug it out. We did get into a little over 500 stores in California and Oregon, but it was just a battle, and I didn’t really want to be touching cannabis.
In 2020, I had a breakthrough in my strategy. I was watching the TV show Gold Rush and I watched one of the guys go and have to buy a new wash plant. He pulls up to this dealer’s yard that sells wash plants and tractors. I saw this dealer had a lot of inventory and clearly a lot of money, and I realized the place to make money was selling the shovels, not really digging for gold. I said to myself if I have the best shovel out there, why am I digging? I should just be innovating new shovels and selling shovels. Hence, I started PurTec Delivery Systems and now for the last year and a half have been 100% focused on developing advanced vaporizer technologies.
Green: Tell me more about PurTec.
Mangold: I founded PurTec with the sole intention of creating safe vaporizers for consumers. We conducted an 18-month safety study in Switzerland with our partners, on vaping devices in the market. I learned a lot of things that I already knew but wanted to see it proven by independent laboratories and by PhDs and MDs, and really see what was so concerning to me. For the last year and a half, we have sought to develop a safe line of vaporizers. I’m very cognizant about what’s going on in my body and want to know what’s going on internally with these products. I don’t think anyone would be using them if they knew what was really going into their lungs.
Green: What are some of the things that consumers should be thinking about when it comes to vape safety?
Mangold: Consumers should be thinking about all the different aspects from inhaling vaporized heavy metals to ceramics. Ceramic particle inhalation is one of my biggest concerns. I think it’s been ignored. I think all the manufacturers know about it and I think it’s been swept under the rug. I think it’s one of the threats that we have. There should be regulatory bodies that are out there protecting consumers like the FDA, hence why I believe federal legalization is so important, because if the FDA was involved not even one of these products would be on the market because the first thing the FDA would do would be very extensive emissions testing to find out what compounds and potential toxins are entering into your body.
Green: There’s clearly a need for safety and regulation in the space, but from where you’re sitting, is there a demand? When consumers go into a store, one of their main focuses is: what’s the THC content? How do you see consumer demand for safety and how do you think about building that awareness?
Mangold: I don’t think there is consumer demand yet. The consumer demand right now is for getting medicated and having fun or getting whatever relief or primary reason you use cannabis. I can point to a direct correlation with the opioid epidemic. No one knew they were as horrible as they are, and doctors were prescribing them left and right, and everyone thought it was okay. People think these cannabis products are okay because they’re on the shelf in every licensed dispensary, and the California Department of Health and the Department of Health in every other state and country has been involved to some degree. So, consumers think that they’re safe. The problem is they’re likely not just like we weren’t with opioids.
I don’t think the consumer demand will be there for quite some time until we start seeing a lot of long-term health impacts where we start seeing people getting lung disease, we start seeing people getting iron lung, different potential brain issues from inhaling adhesives and heavy metals. I think once the health impacts are seen clinically – just like we saw with the opioid crisis – once that was really in the forefront, everybody saw with their own eyes, and then they were aware that there was a problem. So, I think that it’s important to become aware of the potential health impacts, but I think it will take quite some time before that happens.
Green: It sounds to me like you want to get ahead of the industry on this because if it does go federally legal, there will be more stringent requirements. How do you think about that from a product design and development perspective to get ahead of a problem that exists but isn’t reflected in current regulations?
Mangold: The best thing we can do right now in the cannabis vape industry is to look at what the nicotine vape industry is doing. It is controlled by the FDA and there are standards for vaporizers in other parts of the world that are very stringent, like the AFNOR standards, which are in the European Union regulations for vaporizer safety.
What we do is we find the most stringent standards in the world, and we test our products to those standards. If the standards get stricter, we can develop our products and re-engineer them to meet those new requirements. Right now, all our products are emissions tested at AFNOR standards and over-engineered even for those standards. We also are constantly working on reduction of potentially hazardous materials: reductions of heavy metals; only using proven safe and effective materials and FDA approved materials like SAE 316L surgical stainless steel; and using improved ceramics that are not as brittle as the ceramics being used by almost every single manufacturer out there. There’s a lot of things that can be done. It takes supply chain management, understanding the technology and having strong solid teams of scientists and doctors that know this stuff much better than anyone else in the industry does, and leveraging their expertise.
Green: You recently launched a safety feature for minors. Can you tell me more about that?
Mangold: Yes. Two weeks ago, we launched a new software application called PurGuard. PurGuard is a massive innovation and is the first of its kind that we’re aware of. It’s a piece of software that pairs with any device, whether it’s a disposable pod system or a 510 cartridge. You then pair it to your phone and take a picture of your government ID. Then the camera looks at your face, runs quick facial recognition and runs an age check through the largest age-checking platform API in the world. Then based on location and legal age of the user’s location – some states are 18 and different countries have different rules – it validates your ability in your market to be consuming that product. This technology works in 180 different countries.
Once that occurs and the device is ready for you to use, we have another feature that we’ve developed. There is an auto-lock feature that we have where if you’re a parent, like me, and you have kids in the house, you can turn your device to auto-lock right from your phone. When you walk away from your phone and are 10 feet away, your Bluetooth connection will break, and it will automatically lock the device and so your child can’t walk into your bedroom and take your device.
This technology is important to us. Consuming cannabis is horrible for the health of minors. There are serious mental effects on brain growth that occur from using cannabis at a young age because the brain is still developing up until about the age of 23 to 25. So, it’s not safe for them to be using. Of course, I’m sure we all smoked when we were in high school, but the ease of use of vape and the discretion, I think allows minors to use significantly more cannabis than previous generations did 20, 30, 40 years ago. It’s a massive problem right now and I think it’s just a matter of time before the FDA requires such protections. This industry can only survive if we protect minors. So, we’re getting ahead of the curve and setting the standard.
Green: What kind of hardware does PurGuard work with?
Mangold: PurGuard works with every single type of device that we manufacture: 510 thread cartridges, disposables, and pods. If it’s a 510-thread cartridge, the battery has to be a PurTec battery, and the cartridge has to be a PurTec cartridge. They communicate to each other through certain technologies, and it can even recognize what oils are in the cartridge or the pod or the disposable. Moreover, we can tell what strain it is, when it was manufactured, what the potency levels are and more. It records all the usage statistics. We’ve also proven with our hardware, the actual milligram contents being consumed per hit, or draw based on volume, and draw duration. We can track and report to people and say, “Hey, you’re consuming 100 milligrams of THC a day, that’s too high, you need to slow down and maybe go down to 50 milligrams a day.” That will be what is required as it is being required in the nicotine industry under the FDA pre-market tobacco applications (PMTA). When the FDA comes into cannabis, they’re going to want to see the same thing. They’re going to want to know that cannabis products are not promoting people to use more, and they are trying to get people to use less. It doesn’t mean stop using it, but use it in moderation, like everything in life. You shouldn’t be drinking a bottle of whiskey a day. You probably shouldn’t be smoking a pound of weed a day either. Everything in life is moderation and this application not only protects minors but also teaches us about our consumption habits.
Green: A theme here is “skating where the puck is going to be.” What kind of trends are you looking at right now in the industry?
Mangold: The biggest trend I see right now in the industry is disposables. We’ve seen that the trends in cannabis consumption trail behind the nicotine industry by 2-4 years. We see a lot of our customers and potential customers shifting into disposables and are now seeing a very large spike in sales of disposables. I think that’s a big trend, but with that comes another major issue: we now have lithium-ion batteries being thrown away at astonishing rates and going into landfills. PurTec has an answer for that that we’ll be launching here in the next four to six months That will be I think the biggest innovation in regards to eco-friendliness within the vape industry. That’s where I see things going right now.
Green: What are you most interested in learning about?
Mangold: The thing that interests me most, and what I’m most interested in learning about is regulations. Not the regulations themselves, but how regulations are drafted. I’ve sat in several meetings with rules committees for different regulatory bodies throughout the United States and it is laughable. I was recently in a state I’m not going to mention. I asked them what scientists and what doctors they have consulted with and they said none. I just found that dumbfounding. The state regulatory bodies are making decisions without doing due diligence and without bringing in subject matter experts in some cases.
I’m very interested in learning about how we can change our regulatory bodies. Taxpayers pay these salaries and their job at the end of the day is to protect consumers. I think that these cannabis regulatory bodies need to be way more involved with their state’s Department of Health, as well as with the FDA, and National Institute of Health and looking at this as a holistic approach. How do we protect consumers? This is a drug. It’s like anything else out there. If you’re selling tomatoes that were sprayed with a certain pesticide, you must do the research and you have to know what’s in that product before you start putting it in people’s hands. Otherwise, you may have people dying left and right. So, I’m very interested in learning more about regulatory bodies and how they need to evolve and hopefully I can help push them into evolving sooner rather than later.
Green: Great, that concludes the interview, Corey.
Facility layout and design are important components of overall operations, both in terms of maximizing the effectiveness and efficiency of the process(es) executed in a facility, and in meeting the needs of personnel. Prior to the purchase of an existing building or investing in new construction, the activities and processes that will be conducted in a facility must be mapped out and evaluated to determine the appropriate infrastructure and flow of processes and materials. In cannabis markets where vertical integration is the required business model, multiple product and process flows must be incorporated into the design and construction. Materials of construction and critical utilities are essential considerations if there is the desire to meet Good Manufacturing Practice (GMP) compliance or to process in an ISO certified cleanroom. Regardless of what type of facility is needed or desired, applicable local, federal and international regulations and standards must be reviewed to ensure proper design, construction and operation, as well as to guarantee safety of employees.
Materials of Construction
The materials of construction for interior work surfaces, walls, floors and ceilings should be fabricated of non-porous, smooth and corrosive resistant surfaces that are easily cleanable to prevent harboring of microorganisms and damage from chemical residues. Flooring should also provide wear resistance, stain and chemical resistance for high traffic applications. ISO 22196:2011, Measurement Of Antibacterial Activity On Plastics And Other Non-Porous Surfaces22 provides a method for evaluating the antibacterial activity of antibacterial-treated plastics, and other non-porous, surfaces of products (including intermediate products). Interior and exterior (including the roof) materials of construction should meet the requirements of ASTM E108 -11, Standard Test Methods for Fire Tests of Roof Covering7, UL 790, Standard for Standard Test Methods for Fire Tests of Roof Coverings 8, the International Building Code (IBC) 9, the National Fire Protection Association (NFPA) 11, Occupational Safety and Health Administration (OSHA) and other applicable building and safety standards, particularly when the use, storage, filling, and handling of hazardous materials occurs in the facility.
Utilities
Critical and non-critical utilities need to be considered in the initial planning phase of a facility build out. Critical utilities are the utilities that when used have the potential to impact product quality. These utilities include water systems, heating, ventilation and air conditioning (HVAC), compressed air and pure steam. Non-critical utilities may not present a direct risk to product quality, but are necessary to support the successful, compliant and safe operations of a facility. These utilities include electrical infrastructure, lighting, fire detection and suppression systems, gas detection and sewage.
Water
Microbial monitoring methods can include frequent/consistent testing
Water quality, both chemical and microbial, is a fundamental and often overlooked critical parameter in the design phase of cannabis operations. Water is used to irrigate plants, for personnel handwashing, potentially as a component in compounding/formulation of finished goods and for cleaning activities. The United States Pharmacopeia (USP) Chapter 1231, Water for Pharmaceutical Purposes 2, provides extensive guidance on the design, operation, and monitoring of water systems. Water quality should be tested and monitored to ensure compliance to microbiological and chemical specifications based on the chosen water type, the intended use of the water, and the environment in which the water is used. Microbial monitoring methods are described in USP Chapter 61, Testing: Microbial Enumeration Tests3and Chapter 62, Testing: Tests for Specified Microorganisms 4, and chemical monitoring methods are described in USP Chapter 643, Total Organic Carbon 5, and Chapter 645, Water Conductivity6.Overall water usage must be considered during the facility design phase. In addition to utilizing water for irrigation, cleaning, product processing, and personal hygiene, water is used for heating and cooling of the HVAC system, fogging in pest control procedures and in wastewater treatment procedures A facility’s water system must be capable of managing the amount of water required for the entire operation. Water usage and drainage must meet environmental protection standards. State and local municipalities may have water usage limits, capture and reuse requirements and regulations regarding runoff and erosion control that must also be considered as part of the water system design.
Lighting
Lighting considerations for a cultivation facility are a balance between energy efficiency and what is optimal for plant growth. The preferred lighting choice has typically been High Intensity Discharge (HID) lighting, which includes metal halide (MH) and high-pressure sodium (HPS) bulbs. However, as of late, light-emitting diodes (LED) systems are gaining popularity due to increased energy saving possibilities and innovative technologies. Adequate lighting is critical for ensuring employees can effectively and safely perform their job functions. Many tasks performed on the production floor or in the laboratory require great attention to detail. Therefore, proper lighting is a significant consideration when designing a facility.
HVAC
Proper lighting is a significant consideration when designing a facility.
Environmental factors, such as temperature, relative humidity (RH), airflow and air quality play a significant role in maintaining and controlling cannabis operations. A facility’s HVAC system has a direct impact on cultivation and manufacturing environments, and HVAC performance may make or break the success of an operation. Sensible heat ratios (SHRs) may be impacted by lighting usage and RH levels may be impacted by the water usage/irrigation schedule in a cultivation facility. Dehumidification considerations as described in the National Cannabis Industry Association (NCIA) Committee Blog: An Introduction to HVACD for Indoor Plant Environments – Why We Should Include a “D” for Dehumidification 26 are critical to support plant growth and vitality, minimize microbial proliferation in the work environment and to sustain product shelf-life/stability. All of these factors must be evaluated when commissioning an HVAC system. HVAC systems with monitoring sensors (temperature, RH and pressure) should be considered. Proper placement of sensors allows for real-time monitoring and a proactive approach to addressing excursions that could negatively impact the work environment.
Compressed Air
Compressed air is another, often overlooked, critical component in cannabis operations. Compressed air may be used for a number of applications, including blowing off and drying work surfaces and bottles/containers prior to filling operations, and providing air for pneumatically controlled valves and cylinders. Common contaminants in compressed air are nonviable particles, water, oil, and viable microorganisms. Contaminants should be controlled with the use appropriate in-line filtration. Compressed air application that could impact final product quality and safety requires routine monitoring and testing. ISO 8573:2010, Compressed Air Specifications 21, separates air quality levels into classes to help differentiate air requirements based on facility type.
Electrical Infrastructure
Facilities should be designed to meet the electrical demands of equipment operation, lighting, and accurate functionality of HVAC systems. Processes and procedures should be designed according to the requirements outlined in the National Electrical Code (NEC) 12, Institute of Electrical and Electronics Engineers (IEEE) 13, National Electrical Safety Code (NESC) 14, International Building Code (IBC) 9, International Energy Conservation Code (IECC) 15 and any other relevant standards dictated by the Authority Having Jurisdiction (AHJ).
Fire Detection and Suppression
“Facilities should be designed so that they can be easily expanded or adjusted to meet changing production and market needs.”Proper fire detection and suppression systems should be installed and maintained per the guidelines of the National Fire Protection Association (NFPA) 11, International Building Code (IBC) 9, International Fire Code (IFC) 10, and any other relevant standards dictated by the Authority Having Jurisdiction (AHJ). Facilities should provide standard symbols to communicate fire safety, emergency and associated hazards information as defined in NFPA 170, Standard for Fire Safety and Emergency Symbols27.
Gas detection
Processes that utilize flammable gasses and solvents should have a continuous gas detection system as required per the IBC, Chapter 39, Section 3905 9. The gas detection should not be greater than 25 percent of the lower explosive limit/lower flammability limit (LEL/LFL) of the materials. Gas detection systems should be listed and labeled in accordance with UL 864, Standard for Control Units and Accessories for Fire Alarm Systems16 and/or UL 2017, Standard for General-Purpose Signaling Devices and Systems 17 and UL 2075, Standard for Gas and Vapor Detectors and Sensors18.
Product and Process Flow
Product and process flow considerations include flow of materials as well as personnel. The classic product and process flow of a facility is unidirectional where raw materials enter on one end and finished goods exit at the other. This design minimizes the risk of commingling unapproved and approved raw materials, components and finished goods. Facility space utilization is optimized by providing a more streamlined, efficient and effective process from batch production to final product release with minimal risk of errors. Additionally, efficient flow reduces safety risks to employees and an overall financial risk to the organization as a result of costly injuries. A continuous flow of raw materials and components ensures that supplies are available when needed and they are assessable with no obstructions that could present a potential safety hazard to employees. Proper training and education of personnel on general safety principles, defined work practices, equipment and controls can help reduce workplace accidents involving the moving, handling, and storing of materials.
Facilities Management
Facilities management includes the processes and procedures required for the overall maintenance and security of a cannabis operation. Facilities management considerations during the design phase include pest control, preventative maintenance of critical utilities, and security.
Damage from whiteflies, thrips and powdery mildew could be prevented with an appropriate PCP
A Pest Control Program (PCP) ensures that pest and vermin control is carried out to eliminate health risks from pests and vermin, and to maintain the standards of hygiene necessary for the operation. Shipping and receiving areas are common entryways for pests. The type of dock and dock lever used could be a welcome mat or a blockade for rodents, birds, insects, and other vermin. Standard Operating Procedures (SOPs) should define the procedure and responsibility for PCP planning, implementation and monitoring.
Routine preventative maintenance (PM) on critical utilities should be conducted to maintain optimal performance and prevent microbial and/or particulate ingress into the work environment. Scheduled PMs may include filter replacement, leak and velocity testing, cleaning and sanitization, adjustment of airflow, the inspection of the air intake, fans, bearings and belts and the calibration of monitoring sensors.
In most medical cannabis markets, an established Security Program is a requirement as part of the licensing process. ASTM International standards: D8205 Guide for Video Surveillance System 23, D8217 Guide for Access Control System[24], and D8218 Guide for Intrusion Detection System (IDS) 25 provide guidance on how to set up a suitable facility security system and program. Facilities should be equipped with security cameras. The number and location of the security cameras should be based on the size, design and layout of the facility. Additional cameras may be required for larger facilities to ensure all “blind spots” are addressed. The facility security system should be monitored by an alarm system with 24/7 tracking. Retention of surveillance data should be defined in an SOP per the AHJ. Motion detectors, if utilized, should be linked to the alarm system, automatic lighting, and automatic notification reporting. The roof area should be monitored by motion sensors to prevent cut-and-drop intrusion. Daily and annual checks should be conducted on the alarm system to ensure proper operation. Physical barriers such as fencing, locked gates, secure doors, window protection, automatic access systems should be used to prevent unauthorized access to the facility. Security barriers must comply with local security, fire safety and zoning regulations. High security locks should be installed on all doors and gates. Facility access should be controlled via Radio Frequency Identification (RFID) access cards, biometric entry systems, keys, locks or codes. All areas where cannabis raw material or cannabis-derived products are processed or stored should be controlled, locked and access restricted to authorized personnel. These areas should be properly designated “Restricted Area – Authorized Personnel Only”.
Future Expansion
The thought of expansion in the beginning stages of facility design is probably the last thing on the mind of the business owner(s) as they are trying to get the operation up and running, but it is likely the first thing on the mind of investors, if they happen to be involved in the business venture. Facilities should be designed so that they can be easily expanded or adjusted to meet changing production and market needs. Thought must be given to how critical systems and product and process flows may be impacted if future expansion is anticipated. The goal should be to minimize down time while maximizing space and production output. Therefore, proper up-front planning regarding future growth is imperative for the operation to be successful and maintain productivity while navigating through those changes.
References:
United States Environmental Protection Agency (EPA) Safe Drinking Water Act (SDWA).
United States Pharmacopeia (USP) Chapter <1231>, Water for Pharmaceutical Purposes.
United States Pharmacopeia (USP) Chapter <61>, Testing: Microbial Enumeration Tests.
United States Pharmacopeia (USP) Chapter <62>, Testing: Tests for Specified Microorganisms.
United States Pharmacopeia (USP) Chapter <643>, Total Organic Carbon.
United States Pharmacopeia (USP) Chapter <645>, Water Conductivity.
ASTM E108 -11, Standard Test Methods for Fire Tests of Roof Coverings.
UL 790, Standard for Standard Test Methods for Fire Tests of Roof Coverings.
International Building Code (IBC).
International Fire Code (IFC).
National Fire Protection Association (NFPA).
National Electrical Code (NEC).
Institute of Electrical and Electronics Engineers (IEEE).
National Electrical Safety Code (NESC).
International Energy Conservation Code (IECC).
UL 864, Standard for Control Units and Accessories for Fire Alarm Systems.
UL 2017, Standard for General-Purpose Signaling Devices and Systems.
UL 2075, Standard for Gas and Vapor Detectors and Sensors.
International Society for Pharmaceutical Engineers (ISPE) Good Practice Guide.
International Society for Pharmaceutical Engineers (ISPE) Guide Water and Steam Systems.
ISO 8573:2010, Compressed Air Specifications.
ISO 22196:2011, Measurement Of Antibacterial Activity On Plastics And Other Non-Porous Surfaces.
D8205 Guide for Video Surveillance System.
D8217 Guide for Access Control Syst
D8218 Guide for Intrusion Detection System (IDS).
National Cannabis Industry Association (NCIA): Committee Blog: An Introduction to HVACD for Indoor Plant Environments – Why We Should Include a “D” for Dehumidification.
NFPA 170, Standard for Fire Safety and Emergency Symbols.
Russell is the CEO of NES Technology Holdings, a technology development and marketing company that operates Vapor Distilled and LifeTonic Brands. NES Technology Holdings has invented a technology portfolio of more than 160 granted and pending patents that cover inventions across several high-value industries, including cannabis, beverage, fragrance and nutraceuticals. The company is currently in license acquisition diligence processes with 7 of world’s 10 largest fragrance companies and has received a joint venture offer from a $3 billion fragrance company to produce perfumes with its extraction technology. It is also launching ionized cannabis beverage products that provide effects as quickly as alcohol in Nevada and Colorado this fall.
Vapor Distilled invented and commercialized an evaporative extraction process with 40 international patents granted and pending that, along with CO2 extraction, is one of only two fundamentally new extraction processes invented in the last 50 years. Instead of using solvents or hydrocarbons to extract oils from plants, evaporative extraction directly evaporates essential oils from plants and condenses the evaporated compounds into an extract. The process takes less than two seconds to complete and extracts higher levels of volatile terpenes than existing extraction methods. Vapor Distilled has built a fleet of commercial-scale extraction machines and has supplied some of the cannabis industry’s largest brands. The company is currently licensing its evaporative extraction technology within the perfume industry and is marketing an aroma hop extract to replace the dry hopping step when making beer.
LifeTonic invented a drug delivery technology with 56 patents pending and granted, that turns oil-based plant compounds like CBD and THC into electrically charged cannabinoid ions that dissolve completely in water without emulsifiers or additives. When cannabinoids are ionized, absorption is significantly enhanced and their effects can be felt in minutes. The effects of a LifeTonic ionized CBD beverage can be felt by most people in less than 5 minutes, whereas the effects of a LifeTonic ionized THC beverage can be felt by most people in less than 8 minutes. For reference, typical onset times for cannabis beverages are 30 minutes or longer. LifeTonic beverage technology will allow cannabis beverages to work as quickly as alcohol, enabling cannabis to become a social drink.
Russell Thomas, CEO of Vapor Distilled and LifeTonic
We spoke with Russell Thomas, CEO of Vapor Distilled and LifeTonic about his cannabinoid evaporation process and rapid onset beverage technologies. Thomas is a career entrepreneur and inventor with 21 years of experience inventing and protecting intellectual property. Russell’s team has generated more than 160 granted and pending patents. Prior to entering the cannabis industry, Thomas worked in the cleantech industry.
Aaron Green: How did you get involved in the cannabis industry?
Russell Thomas: I came to the cannabis industry from the cleantech industry where I worked on technologies that improved the fuel economy of vehicles. I saw opportunities in the cannabis industry to improve cannabis extraction, which was one of the most important supply chain verticals in cannabis. Every product, from edibles to beverages and vape products, requires a cannabis extract. Any product that needs to be accurately dosed requires an extract. The old way of making edible products with cannabis butter was simply not viable as the industry matured, and most people were rapidly moving away from smoking cannabis and embracing vape products. Even with the entire industry almost completely dependent on extraction, no fundamental innovation was occurring. The primary ways that cannabis was being extracted were chemically intensive. The cleaner methods, such as CO2 extraction, were slow and expensive for terpene recovery. I saw this as a great opportunity to provide a better solution within a primary funnel of the cannabis supply chain.
We commercialized an extraction technology that evaporates cannabinoids directly from plant material in the form of vapor, and then recondenses that vapor back into an essential oil. The entire process takes less than two seconds to complete and preserves fragile terpenes. That technology, called Evaporative Extraction, is the foundation of Vapor Distilled.
Green: What timeframe was that roughly?
Thomas: We capitalized our company in 2015 and began selling wholesale extracts in 2017.
Green: Can you talk more about the evaporative extraction process?
Thomas: Our process works in a similar way to a cannabis vaporizer, but on a massive scale. Our extract is literally recondensed cannabis vapor. In one step, we extract, refine, and activate cannabinoids. On one end, plant material goes in the machine, and on the other end, extract and depleted plant material comes out. Our total extraction time is less than two seconds if you measure the time from when the plant material goes into the extractor and when the extract is condensed.
The LifeTonic logo
A continuous feed of dry plant material is introduced into a heated air stream. The air stream pneumatically conveys the plant material through a series of turbulent, heated evaporation chambers. Upon entering the evaporation chambers, volatile plant compounds are instantaneously distilled from the plant material. A centrifugal separator removes the depleted plant material from the air stream. The air stream is rapidly cooled, causing the volatile plant compounds to condense into an essential oil.
We achieve nearly total activation of THCA to THC simultaneously during extraction and, on average, we extract approximately two to four times more terpenes than a conventional extraction process. The cannabis industry is rampant with exaggeration about terpenes, but we are the only cannabis company negotiating a joint venture with a $3 billion fragrance company to produce perfumes, and I think that says a lot about our process.
Green: Is the extract coming out then as an oil?
Thomas: Our extract comes out of our machines as a fully-activated, high-terpene content, full spectrum oil. Unlike the THC crude that emerges from other processes, our extract requires no further distillation, activation or refinement. You can put it straight into a product.
Green: How about terpene recovery?
Thomas: This is by far what we do best. We excel with the recovery terpenes and volatile compounds from plant material. From day one, we noticed that our evaporative extraction process yields about two to four times more terpenes by mass compared to traditional extraction methods.
While we started as a cannabis company, we recently received a compelling joint venture offer from a $3 billion fragrance company to produce perfume products with our technology. We are also under NDA with 7 of the world’s 10 largest fragrance companies to complete diligence processes to license our extraction technology.
As part of our licensing diligence process, we are performing paid fragrance extraction research for three multi-billion-dollar fragrance companies. Our evaporative extracted fragrance extracts are presenting a broader and more complete range of volatile compounds compared reference samples. We are also seeing substantially improved yield of volatile fragrance compounds. Combined, this gives us the advantage of being able to produce more extract at a lower cost, while also producing a superior product. This combination is how licensees can take market share away from any fragrance company that does not have access to our technology, and it is why we are seeing so much rapid traction in this area.
We have also extracted hops with our technology. If you’ve ever smelled a traditional hops resin, it smells good, but the smell doesn’t fill the room. If you put just a drop of our hops extract on any surface, the entire room will smell strongly of a premium IPA beer. It’s so potent you don’t want to get it on your hands or clothes because you will smell like beer for hours. It’s powerful and wonderful stuff!
Green: What is your business model?
Thomas: At our core, we are a technology development and licensing company. We first identify what we believe to be critical verticals and bottlenecks in high-value industries, then we develop and patent highly differentiated and disruptive technology solutions that we believe exist nowhere else. We then demonstrate both market fit and viability at scale through proof-of-concept sales of branded and high-profile, white-labeled products produced with our unique technologies. Finally, we systematically license and exit the various portions our IP portfolio though the orchestration of highly competitive bidding processes that promote both defensive and strategic acquisitions of our technologies. We are currently at the final phase of our model with licensing our extraction technology, and we are receiving offers as part of a competitive bidding process.
Green: Okay, let’s change gears here and start talking more about LifeTonic and your cannabinoid ionization technology. Can you talk high level about the onset times of cannabinoids in different matrices and media?
Thomas: Through LifeTonic, we invented 56 international patents granted and pending cannabinoid ionization technology that compresses the normal onset time of cannabis beverages from 30 minutes down to just a few minutes. Our cannabinoid ionization technology can also be used as a rapid onset vape alternative when sold in a breath spray format. We are currently selling hemp-based versions of these products through LifeTonic.com, and we are bringing THC versions of these products to market in Nevada and Colorado this fall and winter under the brand name LifeTonic.
All conventional and even nano-emulsified cannabis edibles and beverages take a long time to work. A cannabis chocolate can take 45 minutes to two hours before the effects kick in. Cannabis gummies are faster, but it still takes half an hour to 45 minutes to feel the effects. The very best nano-emulsified cannabis beverages take about a half an hour to work on average, if you are lucky. That long of a time delay effectively eliminates the social aspect of consuming cannabis, so most people instead choose to vaporize or smoke cannabis.
If you look at the largest investments that have been made across cannabis, some of the most prominent have been made by alcohol companies. Constellation Brands invested nearly $4 billion into Canopy Growth, with a mission to find an alternative to alcohol in cannabis. Molson Coors has partnered with Hexo and AB InBev has partnered with Tilray, both with that same mission. Even after all this effort and investment, cannabis beverages represent just a sliver of the market because current cannabis-based beverages take too long to work. The fastest ones on the market, on average, take around a half hour to kick in.
Imagine going to a bar and knowing that every time you got a shot of tequila or a shot of whiskey it’s going to take thirty minutes or more for the effects to even begin to kick in. That would be terrible. That would be the end of social drinking. Unfortunately, that is how a conventional cannabis beverage works.
You can’t really get a social drinking experience with cannabis yet, so most people vape it because it’s fast. But a lot of people don’t want to smoke something; in fact, they don’t want to inhale at all. So, we saw beverages as a huge opportunity. How do we make cannabis beverages work as fast as alcohol? That’s what our ionization technology delivers. From all the people we’ve surveyed – hundreds of people – they say that they reliably feel an onset within about seven to eight minutes with our technology. That is just about as fast as a shot of tequila or whiskey.
“With our partners, we will be featuring LifeTonic beverage products on tap in a cannabis cocktail lounge right off the Las Vegas strip, where social consumption rules are welcoming.”What we’ve done is very different from available nanoemulsion technologies. All those technologies try to mix oil and water, and oil and water don’t mix. In a nanoemulsion, you mix cannabis, a carrier oil, an edible detergent and water, and then you run it all through an ultrasonic homogenizer that breaks the cannabinoids and oil into microscopic droplets suspended in water. There are a lot of styles of nanoemulsions, from spray-dried nanoemulsions to liquid liposomal encapsulations, and they all confer certain absorption benefits when compared to straight-up oil absorption. But still, even the microscopic oil droplets suspended in water are quite large compared to what we have done, and still take quite a long time to digest.
We looked at the cannabis molecule and we said, “You know what? If we can put a strong negative charge on it, if we can ionize it, then we can make it behave more like a dissolvable salt instead of an oil.” When we treat it this way, the cannabis molecule dissolves completely in the water without emulsifiers or additives. When something is dissolved, there is no nano-emulsion droplet size. It is single molecules dissolved water. A single ionized cannabinoid molecule is about 1,000 times smaller than an average nano-emulsion droplet – and this greatly enhances absorption. The onset speed of ionized cannabinoids compared to nanoemulsions is measurable as just a few minutes instead of a half hour or more.
We have 56 granted and pending patents on LifeTonic’s ionization technology. We can ionize THC, CBD, CBG and CBD – most cannabinoids are compatible. There are also several herbal products that are compatible with our ionization technology, like the curcuminoids in turmeric, which are normally very hard to get into water. We can also ionize the eugenol that is in cloves. Ionized eugenol is an intoxicant, so we have big plans for alcohol alternatives outside of cannabis.
We’re using this technology to enter the Nevada cannabis market with one of the largest dispensary chains and cannabis product manufacturers in Nevada. With our partners, we will be featuring LifeTonic beverage products on tap in a cannabis cocktail lounge right off the Las Vegas strip, where social consumption rules are welcoming. We’ll craft every kind of cocktail you can imagine, only without alcohol. All these beverages will work in a matter of minutes to provide the first true social drinking experience with cannabis. After you enjoy a beverage, you may purchase a package of ionized THC beverage powder sachets in the cannabis cocktail lounge or at any of the dispensaries within our distribution network. You can pour the powder into any beverage, and it becomes a friendly, fast-acting THC beverage that will get you high, but not leave you with a hangover. We will also be selling a breath-spray format that works almost as quickly as vaping.
Green: What kind of validation studies have you done?
Thomas: We have conducted several broad market studies for our ionized products and almost all people report a profound onset within a few minutes. We have not completed a formalized clinical trial, but we are closing a major funding round that will allow us to do so. We plan to begin controlled pre-clinical trials focused mainly on ionized CBD because it’s far easier to get FDA approval for clinical trials on CBD than for THC. Our studies will monitor a couple dozen volunteers with a functional MRI and watch the change in the brain using our oral spray and beverage products compared against a standard CBD tincture control. We know that we’re going to see fast action because everybody who uses it says that a feeling develops in minutes.
Green: What geographies are you active in and exploring?
Thomas: CBD and hemp products from our extraction technology have been sold in every US state and parts of Europe. Additionally, hemp-based CBD and CBG versions of our ionized products and ionized turmeric products have been sold in several states through our LifeTonic.com, our ecommerce site. We have also sold white labeled versions of our ionized products through partner brands. We will be launching THC versions of our ionized products with our partners Nevada this fall. We expect THC versions to also be available in Colorado this winter.
Green: So, you are creating the powders on site?
Thomas: Yes. We manufacture ionized CBD, CBG, eugenol and turmeric beverage powders on site. We also manufacture and fast acting ionized sprays. These products are sold through our own retail site and we white label for other brands. Per our long-term licensing strategy, these sales establish market viability through sales. Selling products and establishing market viability prior to licensing significantly increases the value of our licenses and exits. It’s very important to answer the question: Do people buy it and do people love it? So far, we like the feedback!
On the THC side, we manufacture ionized products through partners in each cannabis state that we enter. We manufacture the ionizing base here in Colorado, then we ship it to other states where our partners add the THC and package it in LifeTonic-branded packaging. The analogy is that we sell a proprietary Coca-Cola formula without the caffeine, then our partners add the caffeine and bottle it in Coca-Cola branded bottles. In this way, we ensure that the hardest part of our process is controlled house to ensure consistency and quality across all states. It also allows us to be a non-plant touching business, since we only sold upstream base products that did not contain THC. We pick the best manufacturing and distribution partner in each cannabis state and grow from there.
Green: What’s the one thing you’re most interested in learning about?
Thomas: Increasing the bioavailability of cannabis. I have been most passionate about making cannabis work as quickly as alcohol and giving people an alternative to inhaling it through smoking or vaping. That’s definitely what we’ve been most excited about as a company.
On September 14, the FDA published a consumer update on their website, seeking to educate the public and offer a public health warning on delta-8 tetrahydrocannabinol, otherwise known as delta-8 THC.
For the uninitiated, delta-8 THC is a cannabinoid that can be synthesized from cannabidiol (CBD) derived from hemp. It is an isomer of delta-9 THC, the more commonly known psychoactive cannabinoid found in cannabis. Delta-8 THC does produce psychoactive effects, though not quite as much as its better-known cousin, delta-9 THC.
Due to loopholes in federal and state laws, namely the 2018 Farm Bill specifying that hemp must contain less than 0.3% Delta-9 THC, delta-8 THC is technically legal across the country. It grew in popularity across the United States very quickly over the past year, largely due to online sales.
Following the surge in sales, a number of states including Colorado, Alaska, Arizona, Arkansas, Delaware, Idaho, Iowa, Mississippi, Montana, Rhode Island, Utah and Washington have implemented some form of regulation or outright ban on products containing delta-8 THC. Christopher Hudalla, president and chief scientific officer of ProVerde Laboratories, told Chemical & Engineering News that he has a lot of safety concerns about the whole delta-8 THC craze. Hudalla says he’s more concerned about the processing involved to produce it in large quantities. “These are pretty aggressive synthetic conditions that use strong acids,” Hudalla says. “They might be using strong bases to neutralize. They can use metal catalysts. I hear different people doing it different ways.”
The FDA’s consumer update included this picture at the top of the page
The FDA shares similar concerns. Their fourth point in the consumer update mentions that delta-8 THC products “often involve use of potentially harmful chemicals” in its production. They even claim that some manufacturers might be using unsafe household chemicals to synthesize delta-8 THC. “The final delta-8 THC product may have potentially harmful by-products (contaminants) due to the chemicals used in the process, and there is uncertainty with respect to other potential contaminants that may be present or produced depending on the composition of the starting raw material,” reads the FDA report.
In their consumer update, they note that between December 2020 and July 2021, they received 22 adverse event reports. Of the 22 reports, 14 were hospitalized following ingesting a delta-8 THC product. Notably, those reports included reactions consistent with symptoms from overconsumption of delta-9 THC, such as vomiting, hallucinations, trouble standing, and loss of consciousness.
The chemical structure of Delta 8 THC.
The FDA says that national poison control centers received 661 cases of delta-8 THC products, with 41% being unintentional exposure, 39% involved pediatric patients and 18% required hospitalization.
In the consumer update, they tell the public that delta-8 THC products have not been evaluated by the FDA and that they “may be marketed in ways that put the public health at risk.” This includes marketing it as a hemp product, which it is. Still though, many consumers associate hemp products with somewhat innocuous things, like CBD oil, which is mostly harmless.
The FDA also mentions in the update that delta-8 THC does have psychoactive and intoxicating effects. The FDA says they are notifying the public about the delta-8 THC due to an uptick in adverse event reports, marketing that is appealing to children and concerns regarding manufacturing with unsafe chemicals and contaminants.
The WeedMaps parent company, WM Technology, Inc., announced this week that they have acquired Sprout, a cloud-based CRM and marketing platform in the cannabis industry. Sprout’s CRM software is used by dispensaries, distributors and cultivators in 28 different states and offers a variety of marketing services like text marketing, email marketing, coupons, surveys and more.
The Sprout Messenger software was launched back in April of this year and at the time was touted as a gamechanger in marketing technology, allowing companies to interact with their customers via email, text and their in-house chat in two-way chats.
WM Technology, Inc. was originally founded in 2008. Based in Irvine, California, the company’s business-to-consumer platform, WeedMaps, is known as a go-to resource for consumers seeking cannabis retailers. The app and website now offer online ordering, brand listings, product information and consumer education.
On the business-to-business side, WM Technology, Inc. has grown to include WM Business, a cloud-based SaaS solutions platform with offerings like point of sale, logistics, wholesale and ordering solutions software.
The acquisition of Sprout will help the WM Technology team grow their WM Business portfolio to offer more software solutions, according to Chris Beals, CEO and chairman of WM Technology, Inc. “Our strategy focuses on establishing WM Business as the software solution of choice for cannabis businesses,” says Beals. “With the addition of Sprout, we are one step closer to realizing this vision of providing an all-in-one seamless and integrated solution to run, manage, and grow one’s cannabis business. This acquisition will allow our clients to better target, reach, acquire and retain customers at scale.”
WM Technology, Inc. did not disclose the financial details of the acquisition yet.
Hemp & Delta-8 in the United States: The Evolution of the Hemp Testing Market
Charles Deibel, President & CEO, Deibel Labs, Inc.
In this session, Charles Deibel discusses the current state of affairs across the country with respect to hemp testing. This includes a look at hemp testing rules at the state and federal level. He also provides an in-depth analysis on delta-8 THC and the controversy surrounding this cannabinoid, how to analyze samples of it and why the market has exploded around this product.
Kathleen May, Founder & Owner, Triskele Quality Solutions
This presentation discusses where the standard falls short, how poor lab practices may negatively impact the consumer and how poor or insufficient lab practices could result in regulatory action, including product recalls, fines, and loss of licenses.
TechTalk: ANAB
Melanie Ross, Technical Products Developer, ANSI National Accreditation Board (ANAB)
TechTalk: Columbia Labs
Kelly O’Connor, Sales Director Key Accounts, Columbia Labs
Pesticides in Hemp: Challenges and Solutions
Grace Bandong, Business Unit Manger for Contaminants, Eurofins Food Chemistry Testing (EFCT)
This presentation takes a deep dive into understanding the requirements for pesticide testing, approaches to analysis and responding to regulatory requirements with extremely low LOQs.
TechTalk: Perkin Elmer
Tim Cooper, Sr. Manager, Software Development, PerkinElmer
This presentation provides an overview of how standards are developed and used, how Official Methods for cannabis are developed as well as training opportunities and proficiency testing.
What to Expect When Opening a Lab in a New State
Michael Kahn, Founder & CEO, MCR Labs
Kahn explores the lab’s role int he cannabis industry, the importance of knowing and understand state regulations and lessons for growing your lab while maintaining quality.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
We use tracking pixels that set your arrival time at our website, this is used as part of our anti-spam and security measures. Disabling this tracking pixel would disable some of our security measures, and is therefore considered necessary for the safe operation of the website. This tracking pixel is cleared from your system when you delete files in your history.
We also use cookies to store your preferences regarding the setting of 3rd Party Cookies.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
